Hi,
ich habe zufällig beim Booten die folgende Meldung mitbekommen.
(kopiert aus "dmesg" von heute)
------------
[ 5.564772] r600_cp: Failed to load firmware "radeon/R700_rlc.bin"
[ 5.564781] [drm:rv770_startup] *ERROR* Failed to load firmware!
[ 5.564785] radeon 0000:01:00.0: disabling GPU acceleration
--------------
Die KDE Arbeitsflächeneffekte funktionieren, soweit ich sehen kann, wie
immer.
Suche in "Yast": Es wird kein R700_rlc.bin" gefunden.
System opensuse Tumbleweed 64bit, neu aufgesetzt aus suse 12.1 mit KDE
alle Updates. Nur der Grafikkartentreiber, wie er von Tumbleweed kommt,
ist eingebunden. Ein proprietärer Treiber von ATI verwende ich nicht.
Frage: Hat der Rechner ein Problem?
Gruß
Peter
====================
Hier die gesamte dmesg Ausgabe von heute beim Booten
---------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.5-33-desktop (geeko@buildhost) (gcc
version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Wed Jul 18 09:09:22 UTC 2012
(cf1edf7)
[ 0.000000] Command line:
root=/dev/disk/by-id/ata-ST1000DM003-9YN162_Z1D10A0P-part5
resume=/dev/disk/by-id/ata-ST1000DM003-9YN162_Z1D10A0P-part3
splash=verbose quiet vga=0x345
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M3A-H/HDMI,
BIOS 2101 01/24/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffb0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffb0000 @
1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @
cffae000-cffb0000
[ 0.000000] RAMDISK: 3741a000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fa820 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffb0100 0005C (v01 012411 OEMXSDT
20110124 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffb0290 000F4 (v03 012411 OEMFACP
20110124 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffb0450 090C6 (v01 P0014 P0014000
00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cffbe000 00040
[ 0.000000] ACPI: APIC 00000000cffb0390 0007C (v01 012411 OEMAPIC
20110124 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffb0410 0003C (v01 012411 OEMMCFG
20110124 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffbe040 00071 (v01 012411 AMI_OEM
20110124 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cffb9520 000E8 (v03 AMD FAM_F_10
00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cffb9610 00038 (v01 012411 OEMHPET
20110124 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffb9650 00924 (v01 A M I POWERNOW
00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-130000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,130000000) ->
[0,130000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012ffec000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD ->
[ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cffb0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048383
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffb0000 -
00000000cffbe000
[ 0.000000] PM: Registered nosave memory: 00000000cffbe000 -
00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 -
00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:2f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s80192
r8192 d22208 u262144
[ 0.000000] pcpu-alloc: s80192 r8192 d22208 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1031354
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
root=/dev/disk/by-id/ata-ST1000DM003-9YN162_Z1D10A0P-part5
resume=/dev/disk/by-id/ata-ST1000DM003-9YN162_Z1D10A0P-part3
splash=verbose quiet vga=0x345
[ 0.000000] bootsplash: verbose mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f180000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 -
00000000c8000000
[ 0.000000] Memory: 3973620k/4980736k available (5822k kernel code,
787204k absent, 219912k reserved, 7142k data, 936k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3007.825 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6015.65 BogoMIPS (lpj=3007825)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000048] Security Framework initialized
[ 0.000057] AppArmor: AppArmor initialized
[ 0.000263] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.001074] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.001431] Mount-cache hash table entries: 256
[ 0.001561] Initializing cgroup subsys cpuacct
[ 0.001562] Initializing cgroup subsys memory
[ 0.001573] Initializing cgroup subsys devices
[ 0.001574] Initializing cgroup subsys freezer
[ 0.001575] Initializing cgroup subsys net_cls
[ 0.001576] Initializing cgroup subsys blkio
[ 0.001581] Initializing cgroup subsys perf_event
[ 0.001599] tseg: 0000000000
[ 0.001607] CPU: Physical Processor ID: 0
[ 0.001608] CPU: Processor Core ID: 0
[ 0.001609] mce: CPU supports 6 MCE banks
[ 0.001614] LVT offset 0 assigned for vector 0xf9
[ 0.001618] using AMD E400 aware idle routine
[ 0.002072] ACPI: Core revision 20120320
[ 0.011713] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.021703] CPU0: AMD Phenom(tm) II X4 960T Processor stepping 00
[ 0.122634] Performance Events: AMD PMU driver.
[ 0.122637] ... version: 0
[ 0.122638] ... bit width: 48
[ 0.122639] ... generic registers: 4
[ 0.122640] ... value mask: 0000ffffffffffff
[ 0.122641] ... max period: 00007fffffffffff
[ 0.122642] ... fixed-purpose events: 0
[ 0.122642] ... event mask: 000000000000000f
[ 0.122666] System has AMD C1E enabled
[ 0.122674] Switch to broadcast mode on CPU0
[ 0.130781] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.136684] Booting Node 0, Processors #1
[ 0.149819] Switch to broadcast mode on CPU1
[ 0.149829] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.153629] #2
[ 0.166768] Switch to broadcast mode on CPU2
[ 0.166778] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.170566] #3
[ 0.183706] Switch to broadcast mode on CPU3
[ 0.183715] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.183740] Brought up 4 CPUs
[ 0.183742] Total of 4 processors activated (24062.60 BogoMIPS).
[ 0.188426] devtmpfs: initialized
[ 0.189718] PM: Registering ACPI NVS region [mem
0xcffbe000-0xcffdffff] (139264 bytes)
[ 0.189768] RTC time: 9:43:43, date: 07/26/12
[ 0.189808] NET: Registered protocol family 16
[ 0.189913] node 0 link 0: io port [1000, ffffff]
[ 0.189915] TOM: 00000000d0000000 aka 3328M
[ 0.189917] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.189919] node 0 link 0: mmio [a0000, bffff]
[ 0.189921] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.189923] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.189925] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.189927] TOM2: 0000000130000000 aka 4864M
[ 0.189928] bus: [00, 07] on node 0 link 0
[ 0.189930] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.189931] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.189933] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.189934] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.189936] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.190026] ACPI: bus type pci registered
[ 0.190068] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.190070] PCI: not using MMCONFIG
[ 0.190072] PCI: Using configuration type 1 for base access
[ 0.190073] PCI: Using configuration type 1 for extended access
[ 0.190216] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.190217] mtrr: probably your BIOS does not setup all CPUs.
[ 0.190218] mtrr: corrected configuration.
[ 0.190904] bio: create slab <bio-0> at 0
[ 0.190981] ACPI: Added _OSI(Module Device)
[ 0.190983] ACPI: Added _OSI(Processor Device)
[ 0.190984] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.190986] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.191777] ACPI: EC: Look up EC in DSDT
[ 0.192732] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.195561] ACPI: Interpreter enabled
[ 0.195565] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.195584] ACPI: Using IOAPIC for interrupt routing
[ 0.195642] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.196149] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
ACPI motherboard resources
[ 0.216708] ACPI: No dock devices found.
[ 0.216711] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.216781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.216901] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.216903] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.216905] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.216906] pci_root PNP0A03:00: host bridge window [mem
0x000d0000-0x000dffff]
[ 0.216908] pci_root PNP0A03:00: host bridge window [mem
0xd0000000-0xdfffffff]
[ 0.216909] pci_root PNP0A03:00: host bridge window [mem
0xf0000000-0xfebfffff]
[ 0.216931] PCI host bridge to bus 0000:00
[ 0.216933] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.216935] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.216936] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.216938] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000dffff]
[ 0.216939] pci_bus 0000:00: root bus resource [mem
0xd0000000-0xdfffffff]
[ 0.216941] pci_bus 0000:00: root bus resource [mem
0xf0000000-0xfebfffff]
[ 0.216950] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.216992] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[ 0.217020] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.217048] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
[ 0.217075] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.217105] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.217125] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.217134] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.217143] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.217152] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.217160] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.217169] pci 0000:00:11.0: reg 24: [mem 0xfe8ff800-0xfe8ffbff]
[ 0.217232] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.217244] pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff]
[ 0.217305] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.217317] pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff]
[ 0.217405] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.217423] pci 0000:00:12.2: reg 10: [mem 0xfe8ff000-0xfe8ff0ff]
[ 0.217502] pci 0000:00:12.2: supports D1 D2
[ 0.217503] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.217525] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.217538] pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff]
[ 0.217600] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.217621] pci 0000:00:13.1: reg 10: [mem 0xfe8fb000-0xfe8fbfff]
[ 0.217688] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.217705] pci 0000:00:13.2: reg 10: [mem 0xfe8fa800-0xfe8fa8ff]
[ 0.217783] pci 0000:00:13.2: supports D1 D2
[ 0.217784] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.217807] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.217862] pci 0000:00:14.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.217888] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.217903] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.217912] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.217920] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.217929] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.217937] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.217992] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.218012] pci 0000:00:14.2: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
[ 0.218074] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.218088] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.218159] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.218198] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.218211] pci 0000:00:14.5: reg 10: [mem 0xfe8f9000-0xfe8f9fff]
[ 0.218273] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.218286] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.218296] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.218307] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.218319] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.218379] pci 0000:01:00.0: [1002:9490] type 00 class 0x030000
[ 0.218390] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.218399] pci 0000:01:00.0: reg 18: [mem 0xfe9f0000-0xfe9fffff 64bit]
[ 0.218406] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.218417] pci 0000:01:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 0.218443] pci 0000:01:00.0: supports D1 D2
[ 0.218459] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[ 0.218470] pci 0000:01:00.1: reg 10: [mem 0xfe9ec000-0xfe9effff 64bit]
[ 0.218519] pci 0000:01:00.1: supports D1 D2
[ 0.220366] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.220371] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.220374] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.220377] pci 0000:00:02.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.220417] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[ 0.220436] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
[ 0.220477] pci 0000:02:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.220523] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.220540] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
[ 0.220547] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.220551] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.220581] pci 0000:03:07.0: [1022:2020] type 00 class 0x010000
[ 0.220596] pci 0000:03:07.0: reg 10: [io 0xe800-0xe87f]
[ 0.220657] pci 0000:03:07.0: reg 30: [mem 0xfebf0000-0xfebfffff pref]
[ 0.220709] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive
decode)
[ 0.220713] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.220717] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.220720] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.220722] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.220724] pci 0000:00:14.4: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.220726] pci 0000:00:14.4: bridge window [mem
0x000d0000-0x000dffff] (subtractive decode)
[ 0.220728] pci 0000:00:14.4: bridge window [mem
0xd0000000-0xdfffffff] (subtractive decode)
[ 0.220730] pci 0000:00:14.4: bridge window [mem
0xf0000000-0xfebfffff] (subtractive decode)
[ 0.220742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.220871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.220898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.220933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.220989] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.220991] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND),
returned control mask: 0x1d
[ 0.220992] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.224802] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15)
*0, disabled.
[ 0.224836] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15)
*0, disabled.
[ 0.224868] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15)
*0, disabled.
[ 0.224899] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15)
*0, disabled.
[ 0.224929] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15)
*0, disabled.
[ 0.224960] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15)
*0, disabled.
[ 0.224991] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 12 14 15)
*0, disabled.
[ 0.225022] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15)
*0, disabled.
[ 0.225093] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.225095] vgaarb: loaded
[ 0.225096] vgaarb: bridge control possible 0000:01:00.0
[ 0.225202] SCSI subsystem initialized
[ 0.225243] libata version 3.00 loaded.
[ 0.225272] usbcore: registered new interface driver usbfs
[ 0.225282] usbcore: registered new interface driver hub
[ 0.225309] usbcore: registered new device driver usb
[ 0.225354] PCI: Using ACPI for IRQ routing
[ 0.233698] PCI: pci_cache_line_size set to 64 bytes
[ 0.233759] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.233760] reserve RAM buffer: 00000000cffb0000 - 00000000cfffffff
[ 0.233824] NetLabel: Initializing
[ 0.233825] NetLabel: domain hash size = 128
[ 0.233826] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.233835] NetLabel: unlabeled traffic allowed by default
[ 0.233855] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.233858] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.235887] Switching to clocksource hpet
[ 0.237796] AppArmor: AppArmor Filesystem Enabled
[ 0.237810] pnp: PnP ACPI init
[ 0.237820] ACPI: bus type pnp registered
[ 0.237911] pnp 00:00: [bus 00-ff]
[ 0.237914] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.237916] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.237917] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.237919] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.237921] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.237922] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.237924] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.237963] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.238044] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.238046] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.238075] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.238108] pnp 00:02: [dma 4]
[ 0.238109] pnp 00:02: [io 0x0000-0x000f]
[ 0.238110] pnp 00:02: [io 0x0081-0x0083]
[ 0.238111] pnp 00:02: [io 0x0087]
[ 0.238113] pnp 00:02: [io 0x0089-0x008b]
[ 0.238114] pnp 00:02: [io 0x008f]
[ 0.238115] pnp 00:02: [io 0x00c0-0x00df]
[ 0.238132] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.238140] pnp 00:03: [io 0x0070-0x0071]
[ 0.238150] pnp 00:03: [irq 8]
[ 0.238167] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.238173] pnp 00:04: [io 0x0061]
[ 0.238188] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.238195] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.238204] pnp 00:05: [irq 13]
[ 0.238221] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.238448] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.238466] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.238501] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.238503] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.238531] system 00:07: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.238533] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.238535] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.238598] pnp 00:08: [io 0x0010-0x001f]
[ 0.238600] pnp 00:08: [io 0x0022-0x003f]
[ 0.238601] pnp 00:08: [io 0x0062-0x0063]
[ 0.238602] pnp 00:08: [io 0x0065-0x006f]
[ 0.238603] pnp 00:08: [io 0x0072-0x007f]
[ 0.238605] pnp 00:08: [io 0x0080]
[ 0.238606] pnp 00:08: [io 0x0084-0x0086]
[ 0.238607] pnp 00:08: [io 0x0088]
[ 0.238608] pnp 00:08: [io 0x008c-0x008e]
[ 0.238609] pnp 00:08: [io 0x0090-0x009f]
[ 0.238610] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.238611] pnp 00:08: [io 0x00b1]
[ 0.238613] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.238614] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.238615] pnp 00:08: [io 0x040b]
[ 0.238616] pnp 00:08: [io 0x04d6]
[ 0.238617] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.238618] pnp 00:08: [io 0x0c14]
[ 0.238620] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.238621] pnp 00:08: [io 0x0c52]
[ 0.238622] pnp 00:08: [io 0x0c6c]
[ 0.238623] pnp 00:08: [io 0x0c6f]
[ 0.238624] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.238625] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.238626] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.238627] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.238628] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.238629] pnp 00:08: [io 0x0800-0x089f]
[ 0.238631] pnp 00:08: [io 0x0b00-0x0b3f]
[ 0.238633] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.238634] pnp 00:08: [io 0x0900-0x090f]
[ 0.238635] pnp 00:08: [io 0x0910-0x091f]
[ 0.238636] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.238638] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.238639] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.238686] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.238688] system 00:08: [io 0x040b] has been reserved
[ 0.238690] system 00:08: [io 0x04d6] has been reserved
[ 0.238691] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.238693] system 00:08: [io 0x0c14] has been reserved
[ 0.238695] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.238696] system 00:08: [io 0x0c52] has been reserved
[ 0.238698] system 00:08: [io 0x0c6c] has been reserved
[ 0.238699] system 00:08: [io 0x0c6f] has been reserved
[ 0.238701] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.238702] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.238704] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.238706] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.238707] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.238709] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.238710] system 00:08: [io 0x0b00-0x0b3f] has been reserved
[ 0.238712] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.238714] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.238716] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.238717] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.238719] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.238721] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.238741] pnp 00:09: [io 0x0060]
[ 0.238742] pnp 00:09: [io 0x0064]
[ 0.238745] pnp 00:09: [irq 1]
[ 0.238767] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 0.239099] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.239101] pnp 00:0a: [io 0x0e00-0x0e0f]
[ 0.239102] pnp 00:0a: [io 0x0e80-0x0e8f]
[ 0.239103] pnp 00:0a: [io 0x0f40-0x0f4f]
[ 0.239105] pnp 00:0a: [io 0x0a30-0x0a3f]
[ 0.239134] system 00:0a: [io 0x0e00-0x0e0f] has been reserved
[ 0.239136] system 00:0a: [io 0x0e80-0x0e8f] has been reserved
[ 0.239138] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
[ 0.239139] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.239141] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.239167] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.239198] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.239200] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.239293] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.239295] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.239296] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.239297] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[ 0.239299] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.239330] system 00:0c: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.239332] system 00:0c: [mem 0x000c0000-0x000cffff] could not be
reserved
[ 0.239334] system 00:0c: [mem 0x000e0000-0x000fffff] could not be
reserved
[ 0.239335] system 00:0c: [mem 0x00100000-0xcfffffff] could not be
reserved
[ 0.239337] system 00:0c: [mem 0xfec00000-0xffffffff] could not be
reserved
[ 0.239339] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.239425] pnp: PnP ACPI: found 13 devices
[ 0.239426] ACPI: ACPI bus type pnp unregistered
[ 0.245997] pci 0000:00:06.0: bridge window [io 0x1000-0x0fff] to
[bus 02-02] add_size 1000
[ 0.246000] pci 0000:00:06.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.246008] pci 0000:00:06.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] get_res_add_size add_size 200000
[ 0.246011] pci 0000:00:06.0: res[13]=[io 0x1000-0x0fff]
get_res_add_size add_size 1000
[ 0.246014] pci 0000:00:06.0: BAR 15: assigned [mem
0xf0000000-0xf01fffff 64bit pref]
[ 0.246017] pci 0000:00:06.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.246019] pci 0000:00:14.0: BAR 6: assigned [mem
0xf0200000-0xf02007ff pref]
[ 0.246022] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.246024] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.246026] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.246029] pci 0000:00:02.0: bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[ 0.246032] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.246033] pci 0000:00:06.0: bridge window [io 0x1000-0x1fff]
[ 0.246036] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.246038] pci 0000:00:06.0: bridge window [mem
0xf0000000-0xf01fffff 64bit pref]
[ 0.246040] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.246043] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.246047] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.246064] pci 0000:00:06.0: enabling device (0106 -> 0107)
[ 0.246071] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.246072] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.246074] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.246075] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.246077] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.246078] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.246080] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.246081] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.246083] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.246084] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.246086] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.246088] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff
64bit pref]
[ 0.246089] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.246091] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.246092] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.246094] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.246095] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.246096] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.246098] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.246099] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.246197] NET: Registered protocol family 2
[ 0.246289] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.247000] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.249203] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.249481] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.249482] TCP: reno registered
[ 0.249491] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.249514] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.249660] NET: Registered protocol family 1
[ 0.655446] pci 0000:01:00.0: Boot video device
[ 0.655457] PCI: CLS 64 bytes, default 64
[ 0.655507] Unpacking initramfs...
[ 0.803637] Freeing initrd memory: 12120k freed
[ 0.808304] PCI-DMA: Disabling AGP.
[ 0.808385] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.808386] PCI-DMA: using GART IOMMU.
[ 0.808389] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.811586] LVT offset 1 assigned for vector 0x400
[ 0.811594] IBS: LVT offset 1 assigned
[ 0.811617] perf: AMD IBS detected (0x0000001f)
[ 0.812009] audit: initializing netlink socket (disabled)
[ 0.812024] type=2000 audit(1343295823.701:1): initialized
[ 0.826093] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.826759] VFS: Disk quotas dquot_6.5.2
[ 0.826784] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.827033] msgmni has been set to 7913
[ 0.827248] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.827284] io scheduler noop registered
[ 0.827286] io scheduler deadline registered
[ 0.827304] io scheduler cfq registered (default)
[ 0.827442] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.827563] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.827665] vesafb: mode is 1400x1050x16, linelength=2816, pages=4
[ 0.827667] vesafb: scrolling: redraw
[ 0.827669] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.828153] vesafb: framebuffer at 0xd0000000, mapped to
0xffffc90011100000, using 5775k, total 16384k
[ 0.836057] Console: switching to colour frame buffer device 175x65
[ 0.843672] fb0: VESA VGA frame buffer device
[ 0.843701] GHES: HEST is not enabled!
[ 0.843761] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.844278] Non-volatile memory driver v1.3
[ 0.844280] Linux agpgart interface v0.103
[ 0.844423] ahci 0000:00:11.0: version 3.0
[ 0.844497] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
[ 0.844576] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps
0xf impl SATA mode
[ 0.844579] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo
pmp pio slum part ccc
[ 0.845029] scsi0 : ahci
[ 0.845122] scsi1 : ahci
[ 0.845179] scsi2 : ahci
[ 0.845232] scsi3 : ahci
[ 0.845261] ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port
0xfe8ff900 irq 42
[ 0.845263] ata2: SATA max UDMA/133 abar m1024@0xfe8ff800 port
0xfe8ff980 irq 42
[ 0.845266] ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port
0xfe8ffa00 irq 42
[ 0.845269] ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port
0xfe8ffa80 irq 42
[ 0.845353] Fixed MDIO Bus: probed
[ 0.845357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.845425] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.845443] ehci_hcd 0000:00:12.2: new USB bus registered, assigned
bus number 1
[ 0.845453] ehci_hcd 0000:00:12.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.845475] QUIRK: Enable AMD PLL fix
[ 0.845477] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB
freeze workaround
[ 0.845497] ehci_hcd 0000:00:12.2: debug port 1
[ 0.845523] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff000
[ 0.850667] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.850684] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.850686] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.850688] usb usb1: Product: EHCI Host Controller
[ 0.850689] usb usb1: Manufacturer: Linux 3.4.5-33-desktop ehci_hcd
[ 0.850691] usb usb1: SerialNumber: 0000:00:12.2
[ 0.850792] hub 1-0:1.0: USB hub found
[ 0.850795] hub 1-0:1.0: 6 ports detected
[ 0.850951] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.850960] ehci_hcd 0000:00:13.2: new USB bus registered, assigned
bus number 2
[ 0.850969] ehci_hcd 0000:00:13.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.850979] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB
freeze workaround
[ 0.850991] ehci_hcd 0000:00:13.2: debug port 1
[ 0.851009] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8fa800
[ 0.856645] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.856660] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.856662] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.856663] usb usb2: Product: EHCI Host Controller
[ 0.856665] usb usb2: Manufacturer: Linux 3.4.5-33-desktop ehci_hcd
[ 0.856666] usb usb2: SerialNumber: 0000:00:13.2
[ 0.856753] hub 2-0:1.0: USB hub found
[ 0.856756] hub 2-0:1.0: 6 ports detected
[ 0.856829] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.856905] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.856911] ohci_hcd 0000:00:12.0: new USB bus registered, assigned
bus number 3
[ 0.856934] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
[ 0.911461] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.911463] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.911465] usb usb3: Product: OHCI Host Controller
[ 0.911466] usb usb3: Manufacturer: Linux 3.4.5-33-desktop ohci_hcd
[ 0.911467] usb usb3: SerialNumber: 0000:00:12.0
[ 0.911563] hub 3-0:1.0: USB hub found
[ 0.911568] hub 3-0:1.0: 3 ports detected
[ 0.911710] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.911716] ohci_hcd 0000:00:12.1: new USB bus registered, assigned
bus number 4
[ 0.911730] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
[ 0.966249] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.966251] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.966252] usb usb4: Product: OHCI Host Controller
[ 0.966253] usb usb4: Manufacturer: Linux 3.4.5-33-desktop ohci_hcd
[ 0.966254] usb usb4: SerialNumber: 0000:00:12.1
[ 0.966346] hub 4-0:1.0: USB hub found
[ 0.966352] hub 4-0:1.0: 3 ports detected
[ 0.966477] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.966482] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
bus number 5
[ 0.966505] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
[ 1.021041] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.021043] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.021044] usb usb5: Product: OHCI Host Controller
[ 1.021045] usb usb5: Manufacturer: Linux 3.4.5-33-desktop ohci_hcd
[ 1.021046] usb usb5: SerialNumber: 0000:00:13.0
[ 1.021136] hub 5-0:1.0: USB hub found
[ 1.021141] hub 5-0:1.0: 3 ports detected
[ 1.021286] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.021292] ohci_hcd 0000:00:13.1: new USB bus registered, assigned
bus number 6
[ 1.021306] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8fb000
[ 1.075828] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.075830] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.075832] usb usb6: Product: OHCI Host Controller
[ 1.075833] usb usb6: Manufacturer: Linux 3.4.5-33-desktop ohci_hcd
[ 1.075834] usb usb6: SerialNumber: 0000:00:13.1
[ 1.075926] hub 6-0:1.0: USB hub found
[ 1.075931] hub 6-0:1.0: 3 ports detected
[ 1.076048] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.076054] ohci_hcd 0000:00:14.5: new USB bus registered, assigned
bus number 7
[ 1.076069] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8f9000
[ 1.130629] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.130631] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.130633] usb usb7: Product: OHCI Host Controller
[ 1.130634] usb usb7: Manufacturer: Linux 3.4.5-33-desktop ohci_hcd
[ 1.130636] usb usb7: SerialNumber: 0000:00:14.5
[ 1.130726] hub 7-0:1.0: USB hub found
[ 1.130731] hub 7-0:1.0: 2 ports detected
[ 1.130786] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.130842] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.130843] i8042: PNP: PS/2 appears to have AUX port disabled, if
this is incorrect please boot with i8042.nopnp
[ 1.130967] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.131055] mousedev: PS/2 mouse device common for all mice
[ 1.131125] rtc_cmos 00:03: RTC can wake from S4
[ 1.131226] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.131249] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.131255] cpuidle: using governor ladder
[ 1.131256] cpuidle: using governor menu
[ 1.131258] EFI Variables Facility v0.08 2004-May-17
[ 1.131390] usbcore: registered new interface driver usbhid
[ 1.131391] usbhid: USB HID core driver
[ 1.131545] TCP: cubic registered
[ 1.131598] NET: Registered protocol family 10
[ 1.131749] lib80211: common routines for IEEE802.11 drivers
[ 1.131751] lib80211_crypt: registered algorithm 'NULL'
[ 1.131753] Registering the dns_resolver key type
[ 1.131878] PM: Checking hibernation image partition
/dev/disk/by-id/ata-ST1000DM003-9YN162_Z1D10A0P-part3
[ 1.148546] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.148584] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.148618] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.152215] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.303926] ata1: softreset failed (device not ready)
[ 1.303972] ata1: applying PMP SRST workaround and retrying
[ 1.326842] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[ 1.458343] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.458941] ata1.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[ 1.458943] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.459531] ata1.00: configured for UDMA/133
[ 1.459683] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-9YN1
CC4B PQ: 0 ANSI: 5
[ 1.459862] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 1.459865] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.459889] sd 0:0:0:0: [sda] Write Protect is off
[ 1.459890] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.459901] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.480300] usb 3-3: New USB device found, idVendor=046d, idProduct=c00c
[ 1.480303] usb 3-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.480304] usb 3-3: Product: USB Mouse
[ 1.480306] usb 3-3: Manufacturer: Logitech
[ 1.489369] input: Logitech USB Mouse as
/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input1
[ 1.489482] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:12.0-3/input0
[ 1.504756] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.505174] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.505186] PM: Hibernation image not present or could not be loaded.
[ 1.505208] registered taskstats version 1
[ 1.505644] Magic number: 4:597:728
[ 1.505741] rtc_cmos 00:03: setting system clock to 2012-07-26
09:43:45 UTC (1343295825)
[ 1.506843] Freeing unused kernel memory: 936k freed
[ 1.507042] Write protecting the kernel read-only data: 12288k
[ 1.507902] Freeing unused kernel memory: 304k freed
[ 1.512462] Freeing unused kernel memory: 2024k freed
[ 1.536472] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.536700] scsi4 : pata_atiixp
[ 1.536754] scsi5 : pata_atiixp
[ 1.537331] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
irq 14
[ 1.537333] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08
irq 15
[ 1.590837] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.698817] ata5.01: NODEV after polling detection
[ 1.702103] ata5.00: ATAPI: BENQ DVD DD DW1640, BSHB, max UDMA/33
[ 1.708018] ata5.00: configured for UDMA/33
[ 1.710916] scsi 4:0:0:0: CD-ROM BENQ DVD DD DW1640
BSHB PQ: 0 ANSI: 5
[ 1.712190] DC390: clustering now enabled by default. If you get
problems load
[ 1.712192] with "disable_clustering=1" and report to maintainers
[ 1.723692] usb 2-1: New USB device found, idVendor=0bc2, idProduct=3000
[ 1.723694] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.723696] usb 2-1: Product: FreeAgentDesktop
[ 1.723697] usb 2-1: Manufacturer: Seagate
[ 1.723698] usb 2-1: SerialNumber: 6QG124TW
[ 1.810016] Refined TSC clocksource calibration: 3007.806 MHz.
[ 1.810020] Switching to clocksource tsc
[ 2.355982] scsi6 : Tekram DC390/AM53C974 V2.1d 2004-05-27
[ 4.099724] ------------[ cut here ]------------
[ 4.099731] WARNING: at
/home/abuild/rpmbuild/BUILD/kernel-desktop-3.4.5/linux-3.4/kernel/irq/handle.c:146
handle_irq_event_percpu+0x28c/0x2a0()
[ 4.099733] Hardware name: System Product Name
[ 4.099736] irq 22 handler do_DC390_Interrupt+0x0/0x1f0 [tmscsim]
enabled interrupts
[ 4.099737] Modules linked in: tmscsim(+) pata_atiixp
[ 4.099741] Pid: 0, comm: swapper/3 Not tainted 3.4.5-33-desktop #1
[ 4.099742] Call Trace:
[ 4.099753] [<ffffffff810043fa>] dump_trace+0xaa/0x2b0
[ 4.099757] [<ffffffff8158b2ea>] dump_stack+0x69/0x6f
[ 4.099762] [<ffffffff8104011b>] warn_slowpath_common+0x7b/0xc0
[ 4.099765] [<ffffffff81040215>] warn_slowpath_fmt+0x45/0x50
[ 4.099768] [<ffffffff810ccb0c>] handle_irq_event_percpu+0x28c/0x2a0
[ 4.099772] [<ffffffff810ccb67>] handle_irq_event+0x47/0x70
[ 4.099775] [<ffffffff810cfcd0>] handle_fasteoi_irq+0x60/0x100
[ 4.099778] [<ffffffff810041e8>] handle_irq+0x18/0x30
[ 4.099781] [<ffffffff81003e63>] do_IRQ+0x53/0xd0
[ 4.099784] [<ffffffff815a4f2a>] common_interrupt+0x6a/0x6a
[ 4.099789] [<ffffffff8102cb62>] native_safe_halt+0x2/0x10
[ 4.099793] [<ffffffff8100ab5d>] default_idle+0x4d/0x2e0
[ 4.099797] [<ffffffff8100ae6b>] amd_e400_idle.part.10+0x7b/0x110
[ 4.099800] [<ffffffff8100bd76>] cpu_idle+0x96/0xf0
[ 4.099802] ---[ end trace 0ac9b9e577fea47e ]---
[ 5.512163] udevd[143]: starting version 173
[ 5.522481] ACPI: processor limited to max C-state 1
[ 5.543690] [drm] Initialized drm 1.1.0 20060810
[ 5.548359] [drm] radeon defaulting to kernel modesetting.
[ 5.548361] [drm] radeon kernel modesetting enabled.
[ 5.548499] checking generic (d0000000 1000000) vs hw (d0000000 10000000)
[ 5.548501] fb: conflicting fb hw usage radeondrmfb vs VESA VGA -
removing generic driver
[ 5.548517] Console: switching to colour dummy device 80x25
[ 5.549065] [drm] initializing kernel modesetting (RV730
0x1002:0x9490 0x174B:0xE100).
[ 5.549086] [drm] register mmio base: 0xFE9F0000
[ 5.549088] [drm] register mmio size: 65536
[ 5.549759] ATOM BIOS: RV730XT
[ 5.549777] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 -
0x000000001FFFFFFF (512M used)
[ 5.549779] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 -
0x000000003FFFFFFF
[ 5.554114] [drm] Detected VRAM RAM=512M, BAR=256M
[ 5.554118] [drm] RAM width 128bits DDR
[ 5.554216] [TTM] Zone kernel: Available graphics memory: 2027478 kiB
[ 5.554217] [TTM] Initializing pool allocator
[ 5.554221] [TTM] Initializing DMA pool allocator
[ 5.554253] [drm] radeon: 512M of VRAM memory ready
[ 5.554255] [drm] radeon: 512M of GTT memory ready.
[ 5.554278] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.554280] [drm] Driver supports precise vblank timestamp query.
[ 5.554319] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[ 5.554329] radeon 0000:01:00.0: radeon: using MSI.
[ 5.554358] [drm] radeon: irq initialized.
[ 5.554362] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.554948] [drm] radeon: ib pool ready.
[ 5.555026] [drm] Loading RV730 Microcode
[ 5.564772] r600_cp: Failed to load firmware "radeon/R700_rlc.bin"
[ 5.564781] [drm:rv770_startup] *ERROR* Failed to load firmware!
[ 5.564785] radeon 0000:01:00.0: disabling GPU acceleration
[ 5.580786] radeon 0000:01:00.0: ffff8801258a5000 unpin not necessary
[ 5.580825] radeon 0000:01:00.0: ffff8801258a5400 unpin not necessary
[ 5.580827] radeon 0000:01:00.0: ffff8801258a5400 unpin not necessary
[ 5.581016] [drm] Radeon Display Connectors
[ 5.581017] [drm] Connector 0:
[ 5.581018] [drm] VGA
[ 5.581020] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28
0x7e2c 0x7e2c
[ 5.581021] [drm] Encoders:
[ 5.581022] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 5.581023] [drm] Connector 1:
[ 5.581024] [drm] HDMI-A
[ 5.581025] [drm] HPD2
[ 5.581026] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18
0x7f1c 0x7f1c
[ 5.581027] [drm] Encoders:
[ 5.581028] [drm] DFP2: INTERNAL_UNIPHY1
[ 5.581029] [drm] Connector 2:
[ 5.581030] [drm] DVI-I
[ 5.581031] [drm] HPD1
[ 5.581032] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48
0x7e4c 0x7e4c
[ 5.581033] [drm] Encoders:
[ 5.581034] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.581035] [drm] DFP1: INTERNAL_UNIPHY
[ 5.581049] [drm] Internal thermal controller with fan control
[ 5.581077] [drm] radeon: power management initialized
[ 5.635576] [drm] fb mappable at 0xD0040000
[ 5.635578] [drm] vram apper at 0xD0000000
[ 5.635579] [drm] size 7299072
[ 5.635580] [drm] fb depth is 24
[ 5.635580] [drm] pitch is 6912
[ 5.635661] fbcon: radeondrmfb (fb0) is primary device
[ 5.839916] Console: switching to colour frame buffer device 210x65
[ 5.843904] fb0: radeondrmfb frame buffer device
[ 5.843905] drm: registered panic notifier
[ 5.843910] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0
on minor 0
[ 6.057052] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 6.057056] PM: Marking nosave pages: [mem 0xcffb0000-0xffffffff]
[ 6.057485] PM: Marking nosave pages: [mem 0xc4000000-0xc7ffffff]
[ 6.057650] PM: Basic memory bitmaps created
[ 6.067899] PM: Basic memory bitmaps freed
[ 6.085609] PM: Starting manual resume from disk
[ 6.085613] PM: Hibernation image partition 8:3 present
[ 6.085614] PM: Looking for hibernation image.
[ 6.085818] PM: Image not found (code -22)
[ 6.085820] PM: Hibernation image not present or could not be loaded.
[ 8.622804] EXT4-fs (sda5): mounted filesystem with ordered data
mode. Opts: acl,user_xattr
[ 8.691313] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 9.113537] systemd[1]: systemd 37 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 9.287435] systemd[1]: Set hostname to <lux.sitemcd.invalid>.
[ 10.562075] systemd-readahead-replay[391]: Bumped block_nr parameter
of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 10.590706] udevd[402]: starting version 173
[ 11.540090] boot.localnet[408]: Using boot-specified hostname
'lux.sitemcd.invalid'
[ 11.541188] boot.localnet[408]: Setting up hostname 'lux'..done
[ 11.598631] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 11.610820] boot.localnet[408]: Setting up loopback interface
RTNETLINK answers: File exists
[ 11.611757] boot.localnet[408]: ..done
[ 11.838193] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 12.098268] microcode: CPU0: patch_level=0x010000bf
[ 12.135873] MCE: In-kernel MCE decoding enabled.
[ 12.174484] atl1 0000:02:00.0: version 2.1.3
[ 12.269506] EDAC MC: Ver: 2.1.0
[ 12.270510] AMD64 EDAC driver v3.4.0
[ 12.270561] EDAC amd64: DRAM ECC disabled.
[ 12.270567] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.
[ 12.270568] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.
[ 12.270569] (Note that use of the override may cause unknown side
effects.)
[ 12.271820] ACPI Warning: 0x0000000000000b00-0x0000000000000b07
SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
[ 12.271826] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 12.311501] wmi: Mapper loaded
[ 12.318462] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 12.358663] powernow-k8: Found 1 AMD Phenom(tm) II X4 960T Processor
(4 cpu cores) (version 2.20.00)
[ 12.358671] powernow-k8: Core Performance Boosting: on.
[ 12.375133] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[ 12.375194] sp5100_tco: mmio address 0xfec000f0 already in use
[ 12.375723] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 12.375760] ACPI: Power Button [PWRB]
[ 12.375797] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 12.375824] ACPI: Power Button [PWRF]
[ 12.391814] microcode: CPU1: patch_level=0x010000bf
[ 12.394148] microcode: CPU2: patch_level=0x010000bf
[ 12.397901] microcode: CPU3: patch_level=0x010000bf
[ 12.399809] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 12.399811] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 12.399813] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 12.399814] powernow-k8: 3 : pstate 3 (800 MHz)
[ 12.400729] microcode: Microcode Update Driver: v2.00
<tigran(a)aivazian.fsnet.co.uk>, Peter Oruba
[ 12.623204] ALSA hda_intel.c:2545 Using LPIB position fix
[ 12.628971] ALSA hda_intel.c:1578 Enable sync_write for stable
communication
[ 12.741029] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 12.741032] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 12.741219] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 12.744182] ifup[686]: Service network not started and mode 'auto' ->
skipping
[ 12.750489] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.750528] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 12.999769] usbcore: registered new interface driver uas
[ 13.002011] ALSA patch_realtek.c:1254 SKU: Nid=0x1d sku_cfg=0x4015e601
[ 13.002020] ALSA patch_realtek.c:1256 SKU: port_connectivity=0x1
[ 13.002027] ALSA patch_realtek.c:1257 SKU: enable_pcbeep=0x1
[ 13.002032] ALSA patch_realtek.c:1258 SKU: check_sum=0x00000005
[ 13.002038] ALSA patch_realtek.c:1259 SKU: customization=0x000000e6
[ 13.002043] ALSA patch_realtek.c:1260 SKU: external_amp=0x0
[ 13.002048] ALSA patch_realtek.c:1261 SKU: platform_type=0x0
[ 13.002053] ALSA patch_realtek.c:1262 SKU: swap=0x0
[ 13.002057] ALSA patch_realtek.c:1263 SKU: override=0x1
[ 13.002071] ALSA hda_codec.c:5101 autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0) type:line
[ 13.002079] ALSA hda_codec.c:5105 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.002085] ALSA hda_codec.c:5109 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 13.002091] ALSA hda_codec.c:5110 mono: mono_out=0x0
[ 13.002096] ALSA hda_codec.c:5113 dig-out=0x11/0x1e
[ 13.002100] ALSA hda_codec.c:5114 inputs:
[ 13.002106] ALSA hda_codec.c:5118 Rear Mic=0x18
[ 13.002112] ALSA hda_codec.c:5118 Front Mic=0x19
[ 13.002117] ALSA hda_codec.c:5118 Line=0x1a
[ 13.002121] ALSA hda_codec.c:5120
[ 13.005528] ALSA patch_realtek.c:1317 realtek: No valid SSID,
checking pincfg 0x4015e601 for NID 0x1d
[ 13.005530] ALSA patch_realtek.c:1333 realtek: Enabling init
ASM_ID=0xe601 CODEC_ID=10ec0888
[ 13.005714] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:14.2/input/input5
[ 13.016154] input: HDA ATI SB Line as
/devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 13.016227] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 13.016273] input: HDA ATI SB Line Out Side as
/devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 13.016317] input: HDA ATI SB Line Out CLFE as
/devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 13.016361] input: HDA ATI SB Line Out Surround as
/devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 13.016404] input: HDA ATI SB Line Out Front as
/devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 13.016734] ALSA hda_intel.c:2545 Using LPIB position fix
[ 13.016794] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
[ 13.020271] ALSA hda_intel.c:1578 Enable sync_write for stable
communication
[ 13.079104] Initializing USB Mass Storage driver...
[ 13.079371] scsi7 : usb-storage 2-1:1.0
[ 13.079442] usbcore: registered new interface driver usb-storage
[ 13.079444] USB Mass Storage support registered.
[ 13.087220] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 14.082867] scsi 7:0:0:0: Direct-Access Seagate FreeAgentDesktop
100D PQ: 0 ANSI: 4
[ 14.083298] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 14.085959] sd 7:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 14.087453] sd 7:0:0:0: [sdb] Write Protect is off
[ 14.087462] sd 7:0:0:0: [sdb] Mode Sense: 1c 00 00 00
[ 14.088947] sd 7:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 14.102292] sdb: sdb1 < sdb5 >
[ 14.114976] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 15.009305] Adding 152572k swap on /dev/sda2. Priority:0 extents:1
across:152572k
[ 15.117055] systemd-fsck[787]: /dev/sda1: sauber, 46/38000 Dateien,
37410/151552 Blöcke
[ 15.448712] systemd-fsck[792]: /dev/sda7: sauber, 138571/53231616
Dateien, 38687014/212916992 Blöcke
[ 15.698996] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: acl,user_xattr
[ 15.927657] Adding 4193276k swap on /dev/sda3. Priority:0 extents:1
across:4193276k
[ 16.261058] systemd-fsck[813]: /dev/sda6: sauber, 12326/6553600
Dateien, 3498549/26214063 Blöcke (Prüfung nach 2 Einhängevorgängen)
[ 16.424222] EXT4-fs (sda7): mounted filesystem with ordered data
mode. Opts: acl,user_xattr
[ 16.971318] EXT4-fs (sda6): mounted filesystem with ordered data
mode. Opts: acl,user_xattr
[ 17.760687] microcode: Microcode Update Driver: v2.00 removed.
[ 17.761666] cpufreq[837]: Loading CPUFreq modules..done
[ 17.761765] logger[867]: Requesting microcode for AMD fam10h or newer
CPU(s)
[ 17.763478] microcode: CPU0: patch_level=0x010000bf
[ 17.764635] microcode: CPU1: patch_level=0x010000bf
[ 17.765782] microcode: CPU2: patch_level=0x010000bf
[ 17.766916] microcode: CPU3: patch_level=0x010000bf
[ 17.768144] microcode: Microcode Update Driver: v2.00
<tigran(a)aivazian.fsnet.co.uk>, Peter Oruba
[ 17.768500] microcode.ctl[834]: Checking/updating CPU microcode ..
AMD fam10h or newer CPU(s) found..done
[ 18.022860] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.030578] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 18.032691] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.116665] vboxguest: VirtualBox Guest PCI device not found.
[ 18.118765] systemd[1]: vboxadd.service: control process exited,
code=exited status=1
[ 18.121689] systemd[1]: Unit vboxadd.service entered failed state.
[ 18.544482] vboxdrv: Found 4 processor cores.
[ 18.544713] vboxdrv: fAsync=0 offMin=0x4ae offMax=0x1af7
[ 18.544777] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 18.544778] vboxdrv: Successfully loaded version 4.1.18_OSE
(interface 0x00190000).
[ 18.752441] vboxpci: IOMMU not found (not registered)
[ 19.811905] atl1 0000:02:00.0: irq 44 for MSI/MSI-X
[ 19.811965] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[ 19.827908] NET: Registered protocol family 17
[ 29.982890] eth0: no IPv6 routers present
[ 142.721895] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=0
[ 142.731215] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 142.733559] EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr,commit=0
[ 143.006685] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,commit=0
[ 162.953426] fuse init (API version 7.18)
[ 522.950528] loop: module loaded
[ 523.001731] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 523.032557] ISO 9660 Extensions: RRIP_1991A
[ 544.969451] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 544.969489] ISO 9660 Extensions: RRIP_1991A
---------------------------
===============================
--
Um die Liste abzubestellen, schicken Sie eine Mail an:
opensuse-de+unsubscribe(a)opensuse.org
Um den Listen Administrator zu erreichen, schicken
Sie eine Mail an: opensuse-de+owner(a)opensuse.org
