Guten Morgen,
vorab, es sind 4 exakt gleiche Computer, einen habe ich installiert und
konfiguriert, die anderen habe ich mit dd geklont.
Das ging soweit auch, dauerte halt lange...
Verschiedene USB Sticks werden am Compute der installiert wurde nicht
erkannt! Sobald ich einen USB Stick einstecke, bekomme ich folgende Fehler:
Bei einem anderen Stick kommt der gleiche Fehler, außer die sache mit
dem ntfs... es wird aber auch nichts gemountet bzw. geöffnet.
May 29 16:29:45 kernel: usb 5-1: new high speed USB device using
ehci_hcd and address 8
May 29 16:29:45 kernel: scsi6 : SCSI emulation for USB Mass Storage
devices
May 29 16:29:45 kernel: usb-storage: device found at 8
May 29 16:29:45 kernel: usb-storage: waiting for device to settle
before scanning
May 29 16:29:50 kernel: Vendor: OTi Model: Flash Disk
Rev: 2.00
May 29 16:29:50 kernel: Type: Direct-Access
ANSI SCSI revision: 02
May 29 16:29:50 kernel: sdb: Unit Not Ready, sense:
May 29 16:29:50 kernel: : Current: sense key: Unit Attention
May 29 16:29:50 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 29 16:29:50 kernel: sdb : READ CAPACITY failed.
May 29 16:29:50 kernel: sdb : status=1, message=00, host=0, driver=08
May 29 16:29:50 kernel: sd: Current: sense key: Unit Attention
May 29 16:29:50 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 29 16:29:50 kernel: sdb: test WP failed, assume Write Enabled
May 29 16:29:50 kernel: sdb: assuming drive cache: write through
May 29 16:29:50 kernel: sdb: Unit Not Ready, sense:
May 29 16:29:50 kernel: : Current: sense key: Unit Attention
May 29 16:29:50 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 29 16:29:50 kernel: sdb : READ CAPACITY failed.
May 29 16:29:50 kernel: sdb : status=1, message=00, host=0, driver=08
May 29 16:29:50 kernel: sd: Current: sense key: Unit Attention
May 29 16:29:50 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 29 16:29:50 kernel: sdb: test WP failed, assume Write Enabled
May 29 16:29:50 kernel: sdb: assuming drive cache: write through
May 29 16:29:50 kernel: sdb: Unit Not Ready, sense:
May 29 16:29:50 kernel: : Current: sense key: Unit Attention
May 29 16:29:50 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 29 16:29:50 kernel: sdb : READ CAPACITY failed.
May 29 16:29:50 kernel: sdb : status=1, message=00, host=0, driver=08
May 29 16:29:50 kernel: sd: Current: sense key: Unit Attention
May 29 16:29:50 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 29 16:29:50 kernel: sdb: test WP failed, assume Write Enabled
May 29 16:29:50 kernel: sdb: assuming drive cache: write through
May 29 16:29:50 kernel: sdb:end_request: I/O error, dev sdb, sector 0
May 29 16:29:50 kernel: Buffer I/O error on device sdb, logical block 0
May 29 16:29:50 kernel: Buffer I/O error on device sdb, logical block 0
May 29 16:29:50 kernel: Buffer I/O error on device sdb, logical block 0
May 29 16:29:50 kernel: unable to read partition table
May 29 16:29:50 kernel: Attached scsi removable disk sdb at scsi6,
channel 0, id 0, lun 0
May 29 16:29:50 kernel: Attached scsi generic sg1 at scsi6, channel 0,
id 0, lun 0, type 0
May 29 16:29:50 kernel: usb-storage: device scan complete
May 29 16:33:25 kernel: SCSI device sdb: 512000 512-byte hdwr sectors
(262 MB)
May 29 16:33:25 kernel: sdb: Write Protect is off
May 29 16:33:25 kernel: sdb: Mode Sense: 03 00 00 00
May 29 16:33:25 kernel: sdb: assuming drive cache: write through
May 29 16:33:25 kernel: SCSI device sdb: 512000 512-byte hdwr sectors
(262 MB)
May 29 16:33:25 kernel: sdb: Write Protect is off
May 29 16:33:25 kernel: sdb: Mode Sense: 03 00 00 00
May 29 16:33:25 kernel: sdb: assuming drive cache: write through
May 29 16:33:25 kernel: sdb: sdb1
May 29 16:38:58 udevd[2459]: get_netlink_msg: no ACTION in payload
found, skip event 'umount'
May 29 16:38:58 kernel: FAT: invalid media value (0x01)
May 29 16:38:58 kernel: VFS: Can't find a valid FAT filesystem on dev sdb.
May 29 16:39:07 kernel: NTFS driver 2.1.23 [Flags: R/W MODULE].
May 29 16:39:07 kernel: NTFS-fs warning (device sdb):
is_boot_sector_ntfs(): Invalid boot sector checksum.
May 29 16:39:07 udevd[2459]: get_netlink_msg: no ACTION in payload
found, skip event 'umount'
May 29 16:39:07 kernel: NTFS-fs error (device sdb):
read_ntfs_boot_sector(): Primary boot sector is invalid.
May 29 16:39:07 kernel: NTFS-fs error (device sdb):
read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting
without trying to recover.
May 29 16:39:07 kernel: NTFS-fs error (device sdb): ntfs_fill_super():
Not an NTFS volume.
Wenn ich jetzt genau diesen USB Stick in einen Computer der geklont
wurde einstecke, mountet er automatisch und zeigt gleich ein Fenster im
KDE an, so sollte es auch sein...
Hier die Messages:
May 30 07:50:58 kernel: usb 5-1: new high speed USB device using
ehci_hcd and address 3
May 30 07:50:59 kernel: Initializing USB Mass Storage driver...
May 30 07:50:59 kernel: scsi2 : SCSI emulation for USB Mass Storage
devices
May 30 07:50:59 kernel: usb-storage: device found at 3
May 30 07:50:59 kernel: usb-storage: waiting for device to settle
before scanning
May 30 07:50:59 kernel: usbcore: registered new driver usb-storage
May 30 07:50:59 kernel: USB Mass Storage support registered.
May 30 07:51:04 kernel: Vendor: OTi Model: Flash Disk
Rev: 2.00
May 30 07:51:04 kernel: Type: Direct-Access
ANSI SCSI revision: 02
May 30 07:51:04 kernel: sdb: Unit Not Ready, sense:
May 30 07:51:04 kernel: : Current: sense key: Unit Attention
May 30 07:51:04 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 30 07:51:04 kernel: sdb : READ CAPACITY failed.
May 30 07:51:04 kernel: sdb : status=1, message=00, host=0, driver=08
May 30 07:51:04 kernel: sd: Current: sense key: Unit Attention
May 30 07:51:04 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 30 07:51:04 kernel: sdb: test WP failed, assume Write Enabled
May 30 07:51:04 kernel: sdb: assuming drive cache: write through
May 30 07:51:04 kernel: sdb: Unit Not Ready, sense:
May 30 07:51:04 kernel: : Current: sense key: Unit Attention
May 30 07:51:04 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 30 07:51:04 kernel: sdb : READ CAPACITY failed.
May 30 07:51:04 kernel: sdb : status=1, message=00, host=0, driver=08
May 30 07:51:04 kernel: sd: Current: sense key: Unit Attention
May 30 07:51:04 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 30 07:51:04 kernel: sdb: test WP failed, assume Write Enabled
May 30 07:51:04 kernel: sdb: assuming drive cache: write through
May 30 07:51:04 kernel: sdb: Unit Not Ready, sense:
May 30 07:51:04 kernel: : Current: sense key: Unit Attention
May 30 07:51:04 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 30 07:51:04 kernel: sdb : READ CAPACITY failed.
May 30 07:51:04 kernel: sdb : status=1, message=00, host=0, driver=08
May 30 07:51:04 kernel: sd: Current: sense key: Unit Attention
May 30 07:51:04 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 30 07:51:04 kernel: sdb: test WP failed, assume Write Enabled
May 30 07:51:04 kernel: sdb: assuming drive cache: write through
May 30 07:51:04 kernel: sdb:end_request: I/O error, dev sdb, sector 0
May 30 07:51:04 kernel: Buffer I/O error on device sdb, logical block 0
May 30 07:51:04 kernel: Buffer I/O error on device sdb, logical block 0
May 30 07:51:04 kernel: Buffer I/O error on device sdb, logical block 0
May 30 07:51:04 kernel: unable to read partition table
May 30 07:51:04 kernel: Attached scsi removable disk sdb at scsi2,
channel 0, id 0, lun 0
May 30 07:51:04 kernel: Attached scsi generic sg1 at scsi2, channel 0,
id 0, lun 0, type 0
May 30 07:51:04 kernel: usb-storage: device scan complete
May 30 07:51:04 kernel: sdb: Unit Not Ready, sense:
May 30 07:51:04 kernel: : Current: sense key: Unit Attention
May 30 07:51:04 kernel: Additional sense: Not ready to ready
change, medium may have changed
May 30 07:51:04 kernel: SCSI device sdb: 512000 512-byte hdwr sectors
(262 MB)
May 30 07:51:04 kernel: sdb: Write Protect is off
May 30 07:51:04 kernel: sdb: Mode Sense: 03 00 00 00
May 30 07:51:04 kernel: sdb: assuming drive cache: write through
May 30 07:51:04 kernel: SCSI device sdb: 512000 512-byte hdwr sectors
(262 MB)
May 30 07:51:04 kernel: sdb: Write Protect is off
May 30 07:51:04 kernel: sdb: Mode Sense: 03 00 00 00
May 30 07:51:04 kernel: sdb: assuming drive cache: write through
May 30 07:51:04 kernel: sdb: sdb1
May 30 07:51:04 hal-subfs-mount[6588]: SYMLINKS::
disk/by-id/usb-OTi_Flash_Disk_15E7436C79E60044
disk/by-path/usb-15E7436C79E60044:0:0:0
May 30 07:51:04 hal-subfs-mount[6588]: MOUNT_POINT:: /media/usbdisk
May 30 07:51:04 hal-subfs-mount[6588]: MOUNTPOINT:: /media/usbdisk
May 30 07:51:04 hal-subfs-mount[6588]: Collected mount options and
Called(0) /bin/mount -t subfs -o
fs=floppyfss,sync,procuid,nosuid,nodev,exec,utf8=true /dev/sdb1
"/media/usbdisk"
May 30 07:51:04 udevd[2462]: get_netlink_msg: no ACTION in payload
found, skip event 'mount'
May 30 07:51:07 udevd[2462]: get_netlink_msg: no ACTION in payload
found, skip event 'umount'
May 30 07:51:07 udevd[2462]: get_netlink_msg: no ACTION in payload
found, skip event 'mount'
May 30 07:51:10 udevd[2462]: get_netlink_msg: no ACTION in payload
found, skip event 'umount'
Meine Vermutungen:
- Der eine Computer hat ein Hardware Problem
- Ein Dienst läuft nicht oder nicht richtig
- OnlineUpdate?! Rechner stehen schon 2 Tage ca. evtl haben welche
automatisch das OnlineUpdate durchlaufen...
Mit lsusb wird alles richtig angezeigt...
lshal gibt auf dem Computer der fehlerhaft läuft aus:
lshal version 0.5.4
error: libhal_ctx_init: (null): (null)
Bei den anderen Computern kommt eine endlos lange Liste, schein i.O. zu
sein.
Hat jemand eine Idee was es noch sein könnte?
Vielen Dank und freundliche Grüße,
Jan Vöhringer
