February 2005

Zeit und vsftpd
by Helga Fischer 03 Mar '05

03 Mar '05

Hallo Liste, es ist zwar nur ein Schönheitsfehler, hat aber schon Verwirrung gestiftet. Ich stelle für ein paar wenige Anwender einen ftp-Dienst zur Verfügung. Der Rechner holt sich seine korrekte Uhrzeit beim Hochfahren. Loggt man sich nun auf dem ftp-Server ein, erhält man folgende Zeilen. Die erste Zeile im Log lautet: Sat Feb 19 21:24:55 2005 [pid 7332] [user1] FTP response: Client "192.168.XX.XX", "230 Login successful." Die zweite: Sat Feb 19 20:24:55 2005 [pid 7332] [user1] FTP … [View More]

4 7

[8.0] ide-scsi und SCSI-CD-ROM
by Martin Schröder 02 Mar '05

02 Mar '05

Moin, ich habe hier ein 8.0 mit - einem Tekram DC390/AM53C974 - einem Plextor PX-32TS SCSI-CD-ROM - einem NEC ND-3520A DVD-RW (hdc) - einem NEC DV-5800B DVD-ROM (hdd) Das Plextor hängt am Tekram, der Brenner wird über ide-scsi eingebunden, das DVD-ROM hängt an hdd (und läuft über ide). Allerdings wird das Plextor als /dev/sr0 eingebunden, und nicht als /dev/scd0. Das würde mich nicht weiter stören, aber beim Audio-Grabben war es schnarchlangsam (ca. 0,1x). Ich habe mal die dmesg angehängt. … [View More]Im /etc/modules.conf findet sich zu scsi nur --------------------- alias scsi_hostadapter off # ide-scsi #pre-install sg modprobe ide-scsi # load ide-scsi before sg #pre-install sr_mod modprobe ide-scsi # load ide-scsi before sr_mod #pre-install ide-scsi modprobe ide-cd # load ide-cd before ide-scsi --------------------- /etc/sysconfig/kernel: --------------------- INITRD_MODULES="tmscsim reiserfs ide-scsi" --------------------- Und im lilo.conf wird ide-scsi für hdc geladen: --------------------- append = "hdc=ide-scsi" --------------------- Was muß ich ändern, damit das Plextor an /dev/scd0 landet (und bringt das was beim Audio-Grabben)? Danke im Voraus Martin PS: dmesg: --------------------- Linux version 2.4.18-4GB (root(a)Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Scanning bios EBDA for MXT signature On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=linux ro root=307 hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 1400.055 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 2791.83 BogoMIPS Memory: 512732k/524224k available (1389k kernel code, 11104k reserved, 406k data, 120k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff c1c3f9ff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383f9ff c1c3f9ff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff c1c3f9ff 00000000 00000000 CPU: Common caps: 0383f9ff c1c3f9ff 00000000 00000000 CPU: AMD Athlon(tm) XP 1600+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch(a)atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [1106/3099] at 00:00.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) mxt_scan_bios: enter Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized ACPI: APM is already active, exiting vesafb: framebuffer at 0xd8000000, mapped to 0xe080d000, size 65536k vesafb: mode is 800x600x16, linelength=1600, pages=67 vesafb: protected mode interface info at c000:5438 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 30406 bytes). Console: switching to colour frame buffer device 82x26 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89 PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq. VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: ST340016A, ATA DISK drive hdb: SAMSUNG SP1614N, ATA DISK drive hdc: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive hdd: _NEC DV-5800B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c031ece4, I/O limit 4095Mb (mask 0xffffffff) hda: safely enabled flush hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) blk: queue c031ee34, I/O limit 4095Mb (mask 0xffffffff) hdb: safely enabled flush hdb: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) hdd: no flushcache support hdd: ATAPI 48X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.99 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hdb: hdb1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 16 devices) Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.99 SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Uncompressing.............done. Freeing initrd memory: 593k freed VFS: Mounted root (ext2 filesystem). DC390: 1 adapters found scsi0 : Tekram DC390/AM53C974 V2.0f 2000-12-20 Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 DC390: Target 6: Sync transfer 10.0 MHz, Offset 15 sr0: scsi-1 drive hdc: no flushcache support scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: _NEC Model: DVD_RW ND-3520A Rev: 1.04 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0 sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray reiserfs: checking transaction log (device 03:07) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. change_root: old root has d_count=2 Trying to unmount old root ... okay Freeing unused kernel memory: 120k freed LVM version 1.0.3(19/02/2002) module loaded Adding Swap: 1052216k swap-space (priority 42) NTFS driver v1.1.22 [Flags: R/O MODULE] reiserfs: checking transaction log (device 03:41) ... Using r5 hash to sort names ReiserFS version 3.6.25 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:11.5 to 64 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0c.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd400. Vers LK1.1.16 usb-uhci.c: $Revision: 1.275 $ time 14:22:01 Mar 27 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,1) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,1) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,1) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,1) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,1) VFS: Disk change detected on device sr(11,1) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,1) VFS: Disk change detected on device sr(11,1) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Installing knfsd (copyright (C) 1996 okir(a)monad.swb.de) IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present --------------------- -- Martin Schröder, ms(a)artcom-gmbh.de ArtCom GmbH, Lise-Meitner-Str 5, 28359 Bremen, Germany Voice +49 421 20419-44 / Fax +49 421 20419-10 http://www.artcom-gmbh.de [View Less]

4 7

HP OfficeJet Multifunktionsgerät G 85
by Verena Ruff 02 Mar '05

02 Mar '05

Hallo, ich möchte einen HP OfficeJet G85 mit SuSE 9.2 betreiben. Die Druckfunktion habe ich mit mtal-init manuell eingerichtet und funktioniert. Versuche ich den Scanner einzurichten, bricht yast mit einem Hinweis auf syslog ab. Hat jemand einen Hinweis für mich? Danke, Verena Der entsprechende Auszug aus /var/log/messages: Feb 25 19:37:15 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16527, e=2, t=1109356635 ptal-mlcd successfully initialized. &… [View More]gt; Feb 25 19:37:15 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:15 HC-Server last message repeated 4 times > Feb 25 19:37:15 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:15 HC-Server last message repeated 4 times > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:16 HC-Server last message repeated 2 times > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:16 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16561, e=111, t=1109356636 ptal-mlcd successfully initialized. > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:16 HC-Server last message repeated 4 times > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:16 HC-Server last message repeated 4 times > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:16 HC-Server last message repeated 2 times > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:16 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:21 HC-Server ptal-mlcd: ERROR at transport/ExMlcCommandChannel.cpp:251, dev=<mlc:usb:probe@/dev/usb/lp0>, pid=16561, e=13, t=1109356641 Command reply timeout on port=0, count=1, lastRequest=0x00! > Feb 25 19:37:21 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:872, dev=<mlc:usb:probe@/dev/usb/lp0>, pid=16561, e=25, t=1109356641 exClose(reason=0x3002) > Feb 25 19:37:22 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16598, e=111, t=1109356642 ptal-mlcd successfully initialized. > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server last message repeated 2 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usb/lp1>, pid=16598, e=19, t=1109356642 Couldn't find device! > Feb 25 19:37:22 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16634, e=111, t=1109356642 ptal-mlcd successfully initialized. > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server last message repeated 2 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usb/lp2>, pid=16634, e=19, t=1109356642 Couldn't find device! > Feb 25 19:37:22 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16670, e=111, t=1109356642 ptal-mlcd successfully initialized. > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server last message repeated 2 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usb/lp3>, pid=16670, e=19, t=1109356642 Couldn't find device! > Feb 25 19:37:22 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16706, e=111, t=1109356642 ptal-mlcd successfully initialized. > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server last message repeated 2 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usb/lp4>, pid=16706, e=19, t=1109356642 Couldn't find device! > Feb 25 19:37:22 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16742, e=111, t=1109356642 ptal-mlcd successfully initialized. > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:22 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:22 HC-Server last message repeated 4 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server last message repeated 2 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usb/lp5>, pid=16742, e=19, t=1109356643 Couldn't find device! > Feb 25 19:37:23 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16778, e=111, t=1109356643 ptal-mlcd successfully initialized. > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server last message repeated 4 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server last message repeated 4 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server last message repeated 2 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usb/lp6>, pid=16778, e=19, t=1109356643 Couldn't find device! > Feb 25 19:37:23 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16814, e=111, t=1109356643 ptal-mlcd successfully initialized. > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server last message repeated 4 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server last message repeated 4 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server last message repeated 2 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usb/lp7>, pid=16814, e=19, t=1109356643 Couldn't find device! > Feb 25 19:37:23 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16850, e=111, t=1109356643 ptal-mlcd successfully initialized. > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server last message repeated 4 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server last message repeated 4 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:23 HC-Server last message repeated 2 times > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:23 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:28 HC-Server ptal-mlcd: ERROR at transport/ExMlcCommandChannel.cpp:251, dev=<mlc:usb:probe@/dev/usblp0>, pid=16850, e=13, t=1109356648 Command reply timeout on port=0, count=1, lastRequest=0x00! > Feb 25 19:37:28 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:872, dev=<mlc:usb:probe@/dev/usblp0>, pid=16850, e=25, t=1109356648 exClose(reason=0x3002) > Feb 25 19:37:29 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16887, e=111, t=1109356649 ptal-mlcd successfully initialized. > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:29 HC-Server last message repeated 4 times > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:29 HC-Server last message repeated 4 times > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:29 HC-Server last message repeated 2 times > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:29 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usblp1>, pid=16887, e=19, t=1109356649 Couldn't find device! > Feb 25 19:37:29 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16923, e=111, t=1109356649 ptal-mlcd successfully initialized. > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:29 HC-Server last message repeated 4 times > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:29 HC-Server last message repeated 4 times > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:29 HC-Server last message repeated 2 times > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:29 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usblp2>, pid=16923, e=19, t=1109356649 Couldn't find device! > Feb 25 19:37:29 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16959, e=111, t=1109356649 ptal-mlcd successfully initialized. > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:29 HC-Server last message repeated 4 times > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:29 HC-Server last message repeated 4 times > Feb 25 19:37:29 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:30 HC-Server last message repeated 2 times > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:30 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe@/dev/usblp3>, pid=16959, e=19, t=1109356650 Couldn't find device! > Feb 25 19:37:30 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=16995, e=111, t=1109356650 ptal-mlcd successfully initialized. > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:30 HC-Server last message repeated 4 times > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:30 HC-Server last message repeated 4 times > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:30 HC-Server last message repeated 2 times > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:30 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe>, pid=16995, e=16, t=1109356650 Couldn't find device! > Feb 25 19:37:30 HC-Server ptal-mlcd: SYSLOG at ExMgr.cpp:653, dev=<mlc:usb:probe>, pid=17031, e=111, t=1109356650 ptal-mlcd successfully initialized. > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:30 HC-Server last message repeated 4 times > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:30 HC-Server last message repeated 4 times > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:30 HC-Server last message repeated 2 times > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 501 > Feb 25 19:37:30 HC-Server ptal-mlcd: resmgr: server response code 500 > Feb 25 19:37:30 HC-Server ptal-mlcd: ERROR at ExMgr.cpp:2526, dev=<mlc:usb:probe>, pid=17031, e=13, t=1109356650 Couldn't find device! [View Less]

6 12

OT: Hallo Outlook-Nutzer, tut mal was!
by Jens Nixdorf 02 Mar '05

02 Mar '05

Hallo, sorry, daß es so OT ist und nochmal sorry, falls es zu krass rüberkommt, aber momentan gehen mir hier auf der Liste so einige Outlook-Nutzer auf die Nerven. Die möchte ich hiermit gesammelt ansprechen: Bitte stellt Euer "Mailprogramm" so ein, daß es sich wie ein anständiges Mailprogramm verhält. Also untere Anderem so, daß es "Re:" vor einen Antwort-Betreff schreibt und nicht "Aw:" oder "AW:". Wer bereit sit, sich mit Linux auseinander zu setzen, sollte so viel Bereitschaft … [View More]

42 128

ldap + tls
by Thomas Mittereder 02 Mar '05

02 Mar '05

Hallo Liste, wenn ich bei LDAP in der ldap-conf "ssl start_tls" aktiviere funktioniert mein LDAP nicht mehr. Die letzten Zeile der Debugausgabe des slapd sind: TLS trace: SSL3 alert write:fatal:handshake failure TLS trace: SSL_accept:error in SSLv3 read client hello B TLS trace: SSL_accept:error in SSLv3 read client hello B TLS: can't accept. TLS: error:1408A0C1:SSL routines:SSL3_GET_CLIENT_HELLO:no shared cipher s3_srvr.c:887 connection_read(10): TLS accept error error=-1 id=30, closing … [View More]

2 7

Drucken unter 9.2 ueber CUPS
by Harald Arnold 02 Mar '05

02 Mar '05

Ich habe vor zwei Wochen noch wunderbar über meinen Rechner auf einem lokalen HP DeskJet 920c ausdrucken können und mit allen Funktionen (Drucken S/W, Farbe, Druckkopf ausrichten, etc). Dann habe ich vorher installierte Turbo-Print-Version (rpm) gelöscht und ein neues eingespielt. Seither bringe ich den Drucker nicht mehr zum Laufen. Hardware-technisch funktioniert dieser auf diesem Rechner einwandfrei (Test über eine Tauschplatte mit WinME und der Drucker funktioniert ohne Problem). Daher … [View More]

2 2

9.2: KMail und Knode buggy?
by Al Bogner 02 Mar '05

02 Mar '05

Ich verwende 9.2 mit allen Updates und stelle relativ oft, aber nicht prinzipiell, fest, dass Knode nicht korrekt beendet wurde und nicht mehr gestartet werden kann. Melde ich mich von KDE ab und wieder an, dann wird KNode automatisch gestartet. Eventuell hängt es damit zusammen wie KNode verlassen wurde, also per Pulldownmenü oder Fenster schließen (rechts oben). Bei KMail ist mir nun auch schon mehrmals passiert, dass beim Löschen von Mails, KMail blockiert wird und der Prozess 99% … [View More]

7 19

Problem mit "grep -o -i" und $LANG
by Ruediger Meier 02 Mar '05

02 Mar '05

Hallo, Irgendwie versteher ich hier etwas nicht. Wie arbeitet die Option -o (Ausgabe des passenden Musters) korrekt mit -i (ignore case) zusammen? Irgendwie scheint es bei mir von $LANG abzuhaengen aber das erscheint mir etwas eigenarig: $ export LANG=de_DE.UTF-8 $ LINE="xxxyyyzzz" $ echo $LINE |grep "YYY" -i xxxyyyzzz $ echo $LINE |grep "YYY" -i -o yyy $ echo $LINE |grep "yyy" -i -o yyy bis hierher alles korrekt, aber nun: $ export LANG=en_US $ echo $LINE |grep "YYY" -i -o #nichts, obwohl: … [View More]

2 7

SuSE 9.2, iBCS
by Walter Ulmke 02 Mar '05

02 Mar '05

Hallo Alle, habe nun fast überall 9.2 'drauf. Ich finde, alles in allem prima. Ich muss aber ein altes SCO Unix programm laufenlassen, und brauche iBCS. Ich finde es nicht auf der 9.2 DVD. Hat jemand es irgendwo gefunden? Oder hat jemand eine RPM gebacken, den er mir schicken kann? -- Regards, Walter Ulmke Ulmke Machine Tools, 48496 Hopsten, Germany Tel. ++49/5458/93345-0 Fax. ++49/5458/93345-45 Mobile: ++49/172/5357999 eMail: ulw(a)ulmke.com

2 1

[SuSE 8.2] Firewallproblem
by Andreas Mantke 01 Mar '05

01 Mar '05

Hallo, nachdem ich eine Baustelle geschlossen habe und der Laptop nun wieder ins Internet kann, versuche ich die zweite Baustelle zu schließen. Ich möchte einen PocketPC, der über SynCE eingebunden wird, ansprechen können. Der PocketPC hat mit synce-serial-config die IP 192.168.0.44 und die DNS 192.168.0.1 zugwiesen bekommen. Der PC, an dem der PocketPC über USB hängt, hat die IP 192.168.0.55. Über eth1 geht es in das Netz 192.168.0.0/24 und über ppp0(eth0) ins Internet. Früher habe ich … [View More]

3 12

Main

Development

Information

Community

Social Media

Other

openSUSE Users (Deutsch)