June 2004 - openSUSE Users (Deutsch) - openSUSE Mailing Lists

Chipsatz IT8212? Unterstützung?
by Rolf Masfelder 03 Jun '04

03 Jun '04

Hallo Liste, ich habe mir gerade ein Board zugelegt auf dem der Kontroller sitzt. googeln ergab, das Mandrake in deiner neusten Version den Chipsatz unterstützt. Zu SuSE hab ich nichts finden können. Irgendwelche Info's? Ach ja: Board ist ein GA-K8VT800 Pro mit AMD64. Installation problemlos und echt schnell, nur die Platte, die an diesem RAID angeschlossen ist wird nicht erkannt. :-( -- MfG Rolf Masfelder EMail: rolf.masfelder(a)nector.de

1 0

datum per script an dateinamen anhaengen
by gerhard horst kopka m. a. 03 Jun '04

03 Jun '04

liebe listen leute/innen, irgendwo in letzter zeit habe ich gelesen, wie mensch per script das datum an einen dateinamen anhängen kann. aber wo? wer kann mir sagen, wo mensch so 'was lesen kann oder wie's geht? herzlicher gruß, horst aus wunstorf am steinhuder meer

5 4

9.1 Netzwerkumgebung fehlt...
by Dennis Kielhorn 03 Jun '04

03 Jun '04

Hallo zusammen! Erst jetzt fehlt mir auf, dass ich gar keine "Netzwerkumgebung" habe. Bei einem Freund findet sich das auf dem Desktop, problemlos lassen sich darüber bei ihm unter Windows freigegebene Ordner ansprechen... Wie installiere ich das nach? (Achtung: Linux-Netzwerk-Newbie) Dennis

4 7

Zonentransfer von Primary nach Secondary NS
by Christian Schmidt 03 Jun '04

03 Jun '04

Hallo, ich habe 2 Nameserver,dem NS1 habe ich den Transfer nach NS2 in der named.conf erlaubt. Der Transfer läuft dennoch nicht, folgende Meldungen finde ich beim NS2: Jun 2 22:59:56 server03 named[2816]: dumping master file: /var/lib/named/tmp-XXXXThDBtA: open: permission denied Jun 2 22:59:56 server03 named[2816]: transfer of 'domain.de/IN' from 80.237.203.142#53: failed while receiving responses: permission denied Jun 2 22:59:56 server03 named[2816]: transfer of 'domain.de/IN' from 80.237.203.142#53: end of transfer Auf dem NS1 finde ich folgende Meldung: Jun 2 20:55:08 server02 named[869]: client 213.239.234.109#32783: transfer of domain.de/IN': AXFR started Ich versteh es nicht, der NS1 erlaubt den Transfer und der NS2 will nicht? Wenn ich das richtig sehe, dann kann das tmp-master file nicht geöffnet werden, oder Wahrscheinlich mal wieder ein Rechteproblem, aber ich weiß nicht, wie ich es lösen soll. Ich steh auf dem Schlauch, weiß jemand weiter? Danke und Gruß Christian

3 2

Boot Optionen
by Frank Thiel 03 Jun '04

03 Jun '04

Hallo Liste, ich habe einen durch Win4Lin modifizierten Suse 9.0 Kernel. Ich möchte als Bootoption automatisch eintragen: hdf=ide-scsi Schreibe ich dies manuell beim booten hinzu klappt alles. Wenn ich aber im YAST die Bootloaderkonfiguration aufrufe und es versuche dort einzutragen klappts nicht. Die Konfigurationsdatei des Bootloaders sieht so aus: ------------------------------------------------------------------------------------------------------------------------- Modified by YaST2. Last modification on Thu Jun 3 18:42:08 2004 # added by NeTraverse - DO NOT REMOVE THIS LINE, it's used for uninstall default 2 # end added by NeTraverse - DO NOT REMOVE THIS LINE, it's used for uninstall # Modified by YaST2. Last modification on Mon May 31 10:29:52 2004 # Modified by YaST2. Last modification on Mon May 31 09:56:01 2004 # Modified by YaST2. Last modification on Sat May 29 12:57:26 2004 color white/blue black/light-gray timeout 8 gfxmenu (hd0,1)/boot/message ###Don't change this comment - YaST2 identifier: Original name: linux### title Linux kernel (hd0,1)/boot/vmlinuz root=/dev/hde2 vga=0x31a splash=silent desktop hdf=ide-scsi hdflun=0 initrd (hd0,1)/boot/initrd ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe kernel (hd0,1)/boot/vmlinuz root=/dev/hde2 showopts ide=nodma apm=off acpi=off vga=normal nosmp n initrd (hd0,1)/boot/initrd ###Don't change this comment - YaST2 identifier: Original name: Win4Lin### title Win4Lin kernel (hd0,1)/boot/win4lin root=/dev/hde2 showopts ide=nodma apm=off acpi=off vga=normal nosmp n initrd (hd0,1)/boot/initrd --------------------------------------------------------------------------------------------------------------------- hdf=ide-scsi #trage ich gleich hier dazu, dann bekommt der Kernel win4lin Panik. Noch schlimmer : der Wert ist verschwunden und ich kann ihn auch nicht mehr austragen... ich musste den win4lin Kernel löschen und neu installieren... Was mache ich falsch ? Frank

1 0

FreesWan unter Suse 9.1 ipsec interface Problem
by Cengiz Karasu 03 Jun '04

03 Jun '04

Hallo @ll, habe seit kurzem mit FreesWan eine VPN aufgebaut, SuSE Version: 8.2 FreesWan: freeswan-1.99_0.9.23-34 mit der Version hat alles wunderbar funktioniert, mit der SuSE Version 9.1 FreesWan: freeswan-2.04_1.5.3-45 funzt leider nicht mehr... ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification # basic configuration config setup interfaces="ipsec0=ppp0" # default settings for connections conn %default left=%defaultroute leftid="C=xx, O=xxxxx CN=xxxx" keyingtries=5 leftcert=xxxxxxx.pem rightrsasigkey=%cert auto=add authby=rsasig rekey=no conn rw-ivpnc right=%any rightid="C=xx, O=xxxx OU=xxxxxx, CN=*" leftsubnet=192.168.0.0/16 soweit alles in Ordnung, wenn ich ipsec starte wird kein ipsec0 interface angelegt, wenn ich ifconfig aufrufe, werden eth0, ppp0 eth1 interfaces ausgebeben, aber kein ipsec0 interface... Die VPN Verbindung klappt, nur ich kann keine Firewall Regel auf interface basis definieren, d.h. die Firewall wird löschrig.... Hat jemand eine Idee? Für Antworten wäre ich sehr dankbar.... Bis denn.. Gruss CK*

1 0

ide-scsi SuSE 9.1
by Joachim Tüns 03 Jun '04

03 Jun '04

Hallo, wie erreiche es ich, dass das ide-scsi-Modul beim Booten geladen wird? Wenn ich hdb=ide-scsi eingebe, wird mein CD-Brenner nicht erkannt. Das ist auch klar, denn lsmod liefert mir ide-scsi nicht. modprobe ide-scsi funktioniert. Ich finde nicht, was ich eintragen muss (oder in YaST2 eingeben muss). Danke im Voraus. Gued gohn Achim

3 6

@Manfred: amarok rpm request
by Marco Röben 03 Jun '04

03 Jun '04

Hi! Ich hätte Dir diese Anfrage auch persönlich stellen können, aber ich dachte, wenn ich das über die Liste mache können sich noch andere positiv oder negativ dazu äussern. Also, was hälst Du davon den Audio Player "amarok" (http://amarok.kde.org/) mit in Dein rpm Angebot aufzunehmen? Bei mir hat der xmms schon seit längerem abgelöst. In der Version 0.9 wird er ja schon bei SuSE 9.1 mitgeliefert, aber die 1.0beta-Versionen sind einfach schöner und haben viel mehr Features. Wenn es allerdings zu viel Arbeit macht ist es in Ordnung, aber ich hoffe, daß ich nicht der einzige hier bin der amarok einsetzt. MfG Marco

4 4

Extern auf die Dateien zugreifen?
by ILyas 03 Jun '04

03 Jun '04

Hi List, ich möchte von der Schule aus auf meine Daten zugreifen. Was für möglichkeiten gibt es da ausser FTP? Dankeschön, ILyas

5 4

DSL - Device ist demotiviert
by Stefan Schilling 03 Jun '04

03 Jun '04

Hallo! Auf meinem Rechner läuft ein pppoed (die SuSE 7.2 Variante). Die Verbindung läuft durch, d.h. der Rechner wird eigentlich eher nicht abgeschaltet -> der Rechner bekommt also alle Weile eine neue IP - Adresse zugewiesen. Dies klappt auch normalerweise schmerzlos, aber seit neuestem geht irgendwas schief: Nachdem der Rechner - sagen wir: 3x - eine neue IP - Adresse problemlos akzeptiert hat, schaltet sich beim 4x einfach das pppoed ab. Ich kann mir dies nicht erklären, vielleicht jemand von Euch? Ich habe mal einen /var/log/messages Auszug mitgeschickt. Danke für ein paar Anregungen! Ciao! Stefan PS: auch wenn da debian steht: es ist definitiv ein SuSE 7.2 System (Kernel: 2.4.25) --- Auszug /var/log/messages --- May 13 05:13:27 debian pppd[17741]: Connect time 1269.3 minutes. May 13 05:13:27 debian pppd[17741]: Sent -569372826 bytes, received -1070135862 bytes. May 13 05:13:27 debian pppd[17741]: Doing disconnect May 13 05:13:28 debian SuSEfirewall2: Firewall rules successfully set from /etc/rc.config.d/firewall2.rc.config May 13 05:13:28 debian pppd[17741]: Starting link May 13 05:13:28 debian pppd[17741]: Sending PADI May 13 05:13:29 debian pppd[17741]: HOST_UNIQ successful match May 13 05:13:29 debian pppd[17741]: HOST_UNIQ successful match May 13 05:13:29 debian pppd[17741]: Got connection: 1c78 May 13 05:13:29 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 781c eth1 0x80847b8 May 13 05:13:29 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:13:29 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:29 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:13:31 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:31 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:13:38 debian pppd[17741]: LCP terminated by peer May 13 05:13:38 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:38 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:13:40 debian pppd[17741]: Connection terminated. May 13 05:13:40 debian pppd[17741]: Doing disconnect May 13 05:13:42 debian pppd[17741]: Starting link May 13 05:13:42 debian pppd[17741]: Sending PADI May 13 05:13:42 debian pppd[17741]: HOST_UNIQ successful match May 13 05:13:42 debian pppd[17741]: HOST_UNIQ successful match May 13 05:13:42 debian pppd[17741]: Got connection: 1c96 May 13 05:13:42 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 961c eth1 0x80847b8 May 13 05:13:42 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:13:42 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:42 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:13:45 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:45 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:13:47 debian pppd[17741]: LCP terminated by peer May 13 05:13:47 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:47 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:13:49 debian pppd[17741]: Connection terminated. May 13 05:13:49 debian pppd[17741]: Doing disconnect May 13 05:13:50 debian pppd[17741]: Starting link May 13 05:13:50 debian pppd[17741]: Sending PADI May 13 05:13:50 debian pppd[17741]: HOST_UNIQ successful match May 13 05:13:51 debian pppd[17741]: HOST_UNIQ successful match May 13 05:13:51 debian pppd[17741]: Got connection: 1cad May 13 05:13:51 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 ad1c eth1 0x80847b8 May 13 05:13:51 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:13:51 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:51 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:13:53 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:53 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:13:53 debian pppd[17741]: Remote message: Can't process request now, try again later. May 13 05:13:53 debian pppd[17741]: PAP authentication failed May 13 05:13:53 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:53 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:13:57 debian pppd[17741]: Connection terminated. May 13 05:13:57 debian pppd[17741]: Doing disconnect May 13 05:13:57 debian pppd[17741]: Starting link May 13 05:13:57 debian pppd[17741]: Sending PADI May 13 05:13:58 debian pppd[17741]: HOST_UNIQ successful match May 13 05:13:58 debian pppd[17741]: HOST_UNIQ successful match May 13 05:13:58 debian pppd[17741]: Got connection: 1cbb May 13 05:13:58 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 bb1c eth1 0x80847b8 May 13 05:13:58 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:13:58 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:13:58 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:00 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:00 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:05 debian pppd[17741]: LCP terminated by peer May 13 05:14:05 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:05 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:07 debian pppd[17741]: Connection terminated. May 13 05:14:07 debian pppd[17741]: Doing disconnect May 13 05:14:07 debian pppd[17741]: Starting link May 13 05:14:07 debian pppd[17741]: Sending PADI May 13 05:14:08 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:08 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:08 debian pppd[17741]: Got connection: 1cd5 May 13 05:14:08 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 d51c eth1 0x80847b8 May 13 05:14:08 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:14:08 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:08 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:10 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:10 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:17 debian pppd[17741]: LCP terminated by peer May 13 05:14:17 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:17 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:19 debian pppd[17741]: Connection terminated. May 13 05:14:19 debian pppd[17741]: Doing disconnect May 13 05:14:23 debian pppd[17741]: Starting link May 13 05:14:23 debian pppd[17741]: Sending PADI May 13 05:14:23 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:23 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:23 debian pppd[17741]: Got connection: 1cfa May 13 05:14:23 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 fa1c eth1 0x80847b8 May 13 05:14:23 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:14:23 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:23 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:26 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:26 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:26 debian pppd[17741]: Remote message: Can't process request now, try again later. May 13 05:14:26 debian pppd[17741]: PAP authentication failed May 13 05:14:26 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:26 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:30 debian pppd[17741]: Connection terminated. May 13 05:14:30 debian pppd[17741]: Doing disconnect May 13 05:14:33 debian pppd[17741]: Starting link May 13 05:14:33 debian pppd[17741]: Sending PADI May 13 05:14:33 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:33 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:33 debian pppd[17741]: Got connection: 1d0c May 13 05:14:33 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 0c1d eth1 0x80847b8 May 13 05:14:33 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:14:33 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:33 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:36 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:36 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:36 debian pppd[17741]: Remote message: Can't process request now, try again later. May 13 05:14:36 debian pppd[17741]: PAP authentication failed May 13 05:14:36 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:36 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:40 debian pppd[17741]: Connection terminated. May 13 05:14:40 debian pppd[17741]: Doing disconnect May 13 05:14:41 debian pppd[17741]: Starting link May 13 05:14:41 debian pppd[17741]: Sending PADI May 13 05:14:41 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:41 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:41 debian pppd[17741]: Got connection: 1d1c May 13 05:14:41 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 1c1d eth1 0x80847b8 May 13 05:14:41 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:14:41 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:41 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:43 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:43 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:43 debian pppd[17741]: Remote message: Can't process request now, try again later. May 13 05:14:43 debian pppd[17741]: PAP authentication failed May 13 05:14:43 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:43 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:48 debian pppd[17741]: Connection terminated. May 13 05:14:48 debian pppd[17741]: Doing disconnect May 13 05:14:48 debian pppd[17741]: Starting link May 13 05:14:48 debian pppd[17741]: Sending PADI May 13 05:14:48 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:48 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:48 debian pppd[17741]: Got connection: 1d34 May 13 05:14:48 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 341d eth1 0x80847b8 May 13 05:14:48 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:14:48 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:48 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:51 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:51 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:51 debian pppd[17741]: Remote message: Can't process request now, try again later. May 13 05:14:51 debian pppd[17741]: PAP authentication failed May 13 05:14:51 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:51 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:55 debian pppd[17741]: Connection terminated. May 13 05:14:55 debian pppd[17741]: Doing disconnect May 13 05:14:55 debian pppd[17741]: Starting link May 13 05:14:55 debian pppd[17741]: Sending PADI May 13 05:14:55 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:55 debian pppd[17741]: HOST_UNIQ successful match May 13 05:14:55 debian pppd[17741]: Got connection: 1d3f May 13 05:14:55 debian pppd[17741]: Connecting PPPoE socket: 00:90:1a:40:05:28 3f1d eth1 0x80847b8 May 13 05:14:55 debian pppd[17741]: Connect: ppp0 <--> eth1 May 13 05:14:55 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:55 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:14:58 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:14:58 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:15:02 debian pppd[17741]: LCP terminated by peer May 13 05:15:02 debian pppd[17741]: Couldn't increase MTU to 1500 May 13 05:15:02 debian pppd[17741]: Couldn't increase MRU to 1500 May 13 05:15:04 debian pppd[17741]: Connection terminated. May 13 05:15:04 debian pppd[17741]: Doing disconnect May 13 05:15:05 debian pppd[17741]: Exit. --- /Auszug /var/log/messages ---

5 16