March 2011 - openSUSE KDE - openSUSE Mailing Lists

[opensuse-kde] KDE Branding HOWTO
by Will Stephenson 06 Jun '11

06 Jun '11

I've been finishing the branding work for 11.3 this week, and have been documenting how to do it as I go. The first draft is attached. Comments? If I was hit by a bus tomorrow, could you do openSUSE 11.4 branding? (Lubos doesn't need to answer that ;)). Will -- Will Stephenson, KDE Developer, openSUSE Boosters Team SUSE LINUX Products GmbH - Nürnberg - AG Nürnberg - HRB 16746 - GF: Markus Rex

4 4

[opensuse-kde] Could you readd openSUSE 11.1 build targets for KDE:Release:45 and KDE:Distro:Factory please
by Hans-Peter Jansen 13 Apr '11

13 Apr '11

Hi, could some kind soul with KDE: admin privileges readd these targets for the KDE:Release:45 and KDE:Distro:Factory projects at least? E.g: add this segment to the respective project: <repository name="openSUSE_11.1"> <path repository="standard" project="DISCONTINUED:openSUSE:11.1:Update"/> <arch>x86_64</arch> <arch>i586</arch> </repository> Thanks in advance, Pete -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

6 8

[opensuse-kde] Address book problem
by Bob S 06 Apr '11

06 Apr '11

Hello SuSE people, I am trtying to import my address book, all email addresses, ditribution lists, groups, etc from KDE3,5 to KDE4,6 in kmail. Can't seem to find where that info is stored. I kinow that a lot of that info is on vcf cards. (I have about 40 of them, which I copied over) but they don't show up in the 4.6 kmail address book unless they are each imported individually but even then they are just a hodge podge of email addresses with no organization at all. The new address book looks completely different to me. This would be a real show stopper for me if I can't get it. Wouldn't be able to use KDE4 then. Bob S -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

4 6

[opensuse-kde] Slow KDE 4.6.1 response for some application
by Andrea Turrini 05 Apr '11

05 Apr '11

Hi all, I switched my system (oS 11.4 - kernel 2.6.37.1-1.2-desktop - x86_64) to KDE 4.6.1 using repositories KDE:Release:46 and KDE:Extra:K_R_46_oS11.4. I have noted that when I click on the Skype icon in the system tray (skype 2.1.0.81), I obtain immediatly the window that should contain all contacts, but I need to wait about 5 seconds before viewing the actual content of the window. If I close such window and then I open it again, the content is displayed immediatly. This behaviour may be caused by the fact that Skype is proprietary and not KDE-native, but with KDE 4.6.0 I had not such behaviour. Moreover, the same thing happens when I press Ctrl-Alt-Del in order to shutdown the system. Also in this case I need to wait about 5 seconds before I am propted with the action to perform (logout/shutdown/reboot). Any idea about the causes of these delays? How can I collect information in order to file a bugreport in bnc? Regards, Andrea -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 3

[opensuse-kde] Network Manager - how to control automatic connection?
by Don Raboud 30 Mar '11

30 Mar '11

Hi all, Shortened question: Is there a way to force Network Manager to autoconnect using a fixed IP address? There is a conection present called "Auto eth0" which takes precedence over my defined connection "Fixed IP". Under Manage Connections there is no "Auto eth0" listed, so it appears to be built in and I can't change anything about it. Under my defined connection "Fixed IP" "Connect automatically" is checked but that hasn't helped. (There is also a greyed-out unchecked box "System connection".) This problem was discussed on the opensuse forums several months back, but no real resolution was found <http://forums.opensuse.org/english/get-technical-help-here/network- internet/450420-can-set-connection-network-manager.html> Background: I use port forwarding in my router, which was supplied by my ISP, to allow SSH access from the internet to my local machine. I have to specify a destination IP address in the router. This works as long as my machine maintains a fixed (local) IP address which I've chosen to be 192.168.1.65 [1]. Using network manager (plasmoid-networkmanagement) I have configured my wired connection to use this fixed IP address [2]. The problem is that there is an "Auto eth0" connection as well which takes precedence whenever a new connection needs to be made automatically [3]. The result is usually a different IP address, and hence I lose the ability to access my machine from outside the network [4]. Notes: [1] Unfortunately the router lacks the ability to assign a fixed IP address to a given mac address. [2] I could use the traditional ifup/ifdown approach but network manager makes it convenient to use VPN connections. [3] The router is both wired/wireless and SWMBO has a laptop which occassionally can't connect to the wireless network. She has learned that the easiest solution is to cylce on/off the router which then allows her to connect. [4] I suppose I could enable access to my router configuration from the internet, using a strong password, and then I could see which addresses have been assigned and configure the port-forwarding that way. That just seems like a far less secure option. -- Don -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 7

[opensuse-kde] Starting app minimized or in foreground
by Malte Gell 30 Mar '11

30 Mar '11

Hi there, is there a KDE wrapper that can be used to start an application minimized or in the foreground, as needed ? Malte -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

4 5

Re:[opensuse-kde] Moving KDE:Distro:Factory code to KDE:Distro:Stable
by Joachim Geiger 30 Mar '11

30 Mar '11

Hi, as March is entering its last third, I wondered whether there are any news about the move of KDE:DISTRO:Factory to KDE:Distro:Stable so that the description on the relevant KDE-repositories (http://en.opensuse.org/KDE_repositories) becomes up to date again. Best regards, Joachim -- Joachim Geiger --------------------------------@\\ Max-Planck-Institute for Plasma Physics, @\\ Euratom Association \\\ Department Stellaratortheorie (ST) \\\__ Wendelsteinstr. 1 ( \\ \ D-17491 Greifswald, Germany \_ \\(_ Tel.: ++49 3834/88-2327 Fax: ++49 3834/88-2409 ) \\ \ e-mail: joachim.geiger(a)ipp.mpg.de \ - | --------------------------------------------------- \____/ -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

6 9

[opensuse-kde] Fraudulent certificates patch
by todd rme 29 Mar '11

29 Mar '11

You probably already saw this, but I thought I would pass it along just in case: http://labs.qt.nokia.com/2011/03/29/security-advisory-fraudulent-certificat… > A patch has been created for Qt 4.6 and 4.7 that addresses potential threats caused by fraudulent SSL certificates. > > Background: > > Recently a group of people managed to get fraudulent SSL certificates signed by a Certificate Authority (CA). > > These certificates potentially enable their owners to pretend to be other entities on the Web; the attackers can present valid certificates for e.g. mail.google.com, login.yahoo.com and login.live.com, among others. > >The patch below solves this problem by blacklisting those fake certificates and aborting an SSL handshake with entities that present these certificates. The patch applies to all 4.6 and 4.7 versions, and should be applied to all Qt 4.6.x and 4.7.x versions; upcoming Qt releases will contain a fix for this problem. Since it is a serious security vulnerability it is probably a good idea to push it as an openSUSE update. -Todd -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 0

[opensuse-kde] what is follow up command toll for kcontrol?
by Alexander Beck-Ratzka 29 Mar '11

29 Mar '11

Hello list, in kde3 I have used kcontrol for customize my kde settings. In kde4 I haven't found it. Is it still available? If not, what can be used instead? Cheers Alexander -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 2

[opensuse-kde] how can add a picture as backgrouns to all virtual desktops?
by Alexander Beck-Ratzka 28 Mar '11

28 Mar '11

Hi Folks, how can I set in kde4 a pictrue as backgourns to all virtual desktops? Cheers Alexander -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 4

[opensuse-kde] recording sound
by Anders Johansson 27 Mar '11

27 Mar '11

Hi, For the first time in ages I wanted to record something with a microphone, and I can't find a program for it. What am I missing? i know there used to be krecord, but that seems to only be for kde3. Is there something, and I'm just not seeing it...? Anders -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 2

[opensuse-kde] kde-obs-generator: error updating project
by David Jarvie 25 Mar '11

25 Mar '11

I have tried re-running the following command in order to make any new repositories available for my project: kde-obs-generator --setup-project-unified home:djar:kalarm However, when I run it, it outputs the following error messages: Traceback (most recent call last): File "/usr/bin/osc", line 21, in <module> r = babysitter.run(osccli) File "/usr/lib/pymodules/python2.5/osc/babysitter.py", line 50, in run return prg.main() File "/usr/lib/pymodules/python2.5/osc/cmdln.py", line 309, in main return self.cmd(args) File "/usr/lib/pymodules/python2.5/osc/cmdln.py", line 332, in cmd retval = self.onecmd(argv) File "/usr/lib/pymodules/python2.5/osc/cmdln.py", line 448, in onecmd return self._dispatch_cmd(handler, argv) File "/usr/lib/pymodules/python2.5/osc/cmdln.py", line 1178, in _dispatch_cmd return handler(argv[0], opts, *args) File "/usr/lib/pymodules/python2.5/osc/commandline.py", line 343, in do_list print '\n'.join(meta_get_project_list(apiurl, opts.deleted)) UnicodeEncodeError: 'ascii' codec can't encode character u'\xc4' in position 25990: ordinal not in range(128) ERROR: Cannot reading list of all projects Aborted It doesn't matter which directory I run the command from, the result is always the same. -- David Jarvie. KAlarm author and maintainer. http://www.astrojar.org.uk/kalarm -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 3

[opensuse-kde] Configuring Kmail message list
by Bob S 25 Mar '11

25 Mar '11

Hello SuSE people Running 11.4 with Kmail 1.13.6 I have been trying for hours now, to get the Kmail message list to display the \ way I want it, to no avail. The thing keeps showing months and years in double lines with the sender on thesecond line. I just want my plain simple all on one line by subject, sender and date chronologically. Bob S -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 3

[opensuse-kde] Birthday's calendar in Kmail Calendar Doesn't work
by Arthur Machlas 24 Mar '11

24 Mar '11

Hi, on Opensuse 11.4 when I add birthday information to my contacts in Kontacts via the kmail interface, they don't show up in the calendar, even though it is checked (activated). I suspect it is a bug, but wanted to pose the question here first as that is recommended before filing a bug report. I"ve already posted the question on opensuse forums without response. BEst, AM -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 4

[opensuse-kde] Configuring the start order of apps when starting session
by Malte Gell 24 Mar '11

24 Mar '11

Hi there, is it possible with KDE 4.6.0 to set the order of the start of apps when a KDE session starts? I would like to have the Networkmanager to be the first thing that starts to establish a internet connection. Currently the korganizer module starts before Networkmanager. I would like to be Networkmanager first. Regards Malte PS: good old Amiga OS 3 could change the start order virtually 20 years ago ;-) -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

5 7

[opensuse-kde] 11.4 + KDE 4.6.1: Mouse Actions -> Right-Button doesn't work properly
by Pablo Sanchez 23 Mar '11

23 Mar '11

Howdy, If I need to file this bug as an upstream bug, I will. In a VM, I've installed `openSUSE 11.4 + KDE 4.6.1' I first tried customizing my mouse's right-button with the stock `openSUSE 11.4' distribution (I believe KDE 4.4.x). When I couldn't get it to work, I upgraded to `KDE 4.6.1' - I didn't test my findings in KDE 4.4 though. What I noticed with KDE 4.6.1 (I didn't test this scenario with KDE 4.4), is I can only get the `Application Launcher' to work if I assign it to any other mouse action other than `right-button' :) For example, if I do the following: o `Desktop Settings > Mouse Actions > Right-Button' o Select `Application Launcher' when I right-click on my desktop, I only get a single menu item: `Desktop Settings' On the other hand, if I set, say `Middle-Button' to `Application Launcher', I get the list of Kicker applications: o `Desktop Settings > Mouse Actions > Middle-Button' o Select `Application Launcher' The above works. What I'm trying to figure out is whether this is an `openSUSE' issue or an upstream bug. I'm more than happy to re-open KDE bug 163016: [ https://bugs.kde.org/show_bug.cgi?id=163016 ] Please advise. Cheers, -- Pablo Sanchez - Blueoak Database Engineering, Inc Ph: 819.459.1926 Fax: 760.860.5225 (US) -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 5

[opensuse-kde] Konqueror not seeing flashplayer
by upscope 23 Mar '11

23 Mar '11

When I open Konqueror I get the following message: <code> No plugin found for 'Shockwave Flash file'. Do you want to download one from openSUSE? </code> I have the flash-player installed in both /usr/lib/Browser-Plugins and /usr/lib64/Browser-Plugins. This worked in 11.4 RC1. My 11.4 is a fresh install with latest update. It works in Firefox, and Seamonkey. I have the adobe flashplayer10_2_p3_64bit_linux_111710.tar.gz version installed. (flashplayer.so) in the above two folders. Don't know if this a flasher player problem or version problem. the version of freshplayer is the same one I used on 11.4 RC1 with no problem, installed same way. My permissions are same as other plugins in the folders (755). Appears to be a problem in Konqueror only. Any help or pointer will be appreciated. Russ openSUSE 11.4 MS1 (2.6.37.1-1.2-desktop)|Platform Version 4.6.1 (4.6.1) "release 390"|Intel core2duo 2.5 MHZ,|8GB DDR3|GeForce 8400GS (NVIDIA- Linux-x86_64-270.18) -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

5 8

[opensuse-kde] Problem with phonon in oS 11.4
by Andreas Mahel 23 Mar '11

23 Mar '11

Hi all, after performing a clean install on a lenovo S10e netbook, I'm experiencing strange behavior of the sound system. Certain parts of the sound system seem to work ok: * sound card configuration in Yast nicely configures the (Intel 82801G) sound card * the pulse audio tools show appropriate devices * playing ogg or mp3 files with kaffeine works * kmix can control volume (for kaffeine output) just nicely On the other hand: * amarok just hangs on startup (hanging withein "initializing phonon") * if in "configure desktop" I select Multimedia -> Phonon, it just stays in "waiting for gui to appear" mode. * starting the phpnpn settings via "kcmshell4 kcm_phonon" displays one error message and then hangs The error message is: (kcmshell4:5837): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed The problem occurs with KDE 4.6.0 as well as 4.6.1 On the same netbook, the oS11.3 installation had been working just fine. On a different laptop, oS 11.4 also just works. The error message mentioned, happens to appear within thw working installation as well, so I would guess this one is not part of the problem. Any clues / tips where I could do further research? Thanks in advance, regards, Andreas -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 2

[opensuse-kde] I don't like new kpackagekit update notifier
by johnm_s2 22 Mar '11

22 Mar '11

:) I can't find a way to get the old behavior of only showing security patches and updates. It shows updates from ALL your repos. ? I don't need to download the latest vlc build every morning.. I do want to know about security updates. Also the UI is pretty dead. You can't sort by clicking a column header. And the only available columns are version and arch. It would be nice to at least show a repo column (and to be able to sort by it). Is there a way to fix these things? I suppose it wouldn't be hard to create my own update applet. Check the output of `zypper lp` and put up a tray icon.. -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 2

[opensuse-kde] Kmix in KDE 4.6.0 unusable?
by Malte Gell 21 Mar '11

21 Mar '11

Hello, when I try to start kmix in KDE 4.6.0 nothing happens, the CPU is at 100% and kmix does not start. I end it with pkill then. Is this a known bug or is there any workaround? Malte -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

5 6

[opensuse-kde] Networkmanager & plasmoid network manager & ipv6
by Bruno Friedmann 21 Mar '11

21 Mar '11

I've an internal ipv6 working network (which is usable with traditionnal setup in YaST) Now in kde, with NMP, I can't get any ipv6 ip. I've ask on factory ml and here the answer given by Gnome/xfce users i'm having IPv6 capabilities at home as well and my NM correctly recieves V6 addresses. What I had to do though was to 'enable' V6 for NM (edit the connections, select your connectiong, like Auto eth0, and on the IPV6 tab don't set it to ignore. But In NMP there's no way to setup Auto eth0 or eth0, if I want to setup for example a fixed ip address, I didn't find any ipv6 related fields Normal, feature, bug, to become ? -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch openSUSE Member & Ambassador GPG KEY : D5C9B751C4653227 irc: tigerfoot -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 1

[opensuse-kde] network connection no longer shows last date used for connection eth0
by Roman Bysh 21 Mar '11

21 Mar '11

Hello Listmates, When I was using openSUSE 11.3 with KDE 4.5. I was able to see the date last used next to eth0. In openSUSE 11.4 KDE 4.6 - next to eth0 it now shows "Never". It should show the last date used. Navigate to Configure Desktop --> Network Settings Network Connections --> Wired Any thoughts Cheers! Roman -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 3

[opensuse-kde] sort by surname in kontact addressbook on 11.4
by John King 20 Mar '11

20 Mar '11

I've installed opensuse 11.4 and imported my std.vcf file from my previous opensuse 11.2 with KDE 4.3.5. However, I'm having difficulty sorting the entries into the normal, for me at least, addressbook format of lastname+firstname. There seems to be no way of reordering the 'full name' entry so that the lastname comes first, except by editing each individual entry - a daunting prospect with hundreds of business and personal contacts. Furthermore, since there is only an option to display the 'full name', I can't see how to sort the addressbook by surname only, which to me is normal addressbook format. I think I must be missing something and would appreciate some pointers to go about what I assume should be a fairly simple procedure. John johnmking_uk(a)yahoo.co.uk -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 0

[opensuse-kde] I'm getting a multimedia-related KDE crash once every start up.
by Randall K 20 Mar '11

20 Mar '11

Hello, I just installed a new machine with Opensuse 11.4 & KDE from the /46/ repository. Everything seems to be working but every time I boot up I get a crash report (I included it below). I can just dismiss the dialog box and everything keeps working OK. I looked around on the mailing lists and didnt find anybody's similar problem so it might be my fault. If anybody can help me out with some ideas about fixing this that'd be great. Thanks a bunch. Randy Application: KDE Daemon (kdeinit4), signal: Aborted [Current thread is 1 (Thread 0x7fca7c0f2760 (LWP 3901))] Thread 3 (Thread 0x7fca5fdaf700 (LWP 3951)): #0 0x00007fca797f3503 in poll () from /lib64/libc.so.6 #1 0x00007fca76624114 in ?? () from /lib64/libglib-2.0.so.0 #2 0x00007fca76624a35 in g_main_loop_run () from /lib64/libglib-2.0.so.0 #3 0x00007fca604a3244 in ?? () from /lib64/libgio-2.0.so.0 #4 0x00007fca7664b466 in ?? () from /lib64/libglib-2.0.so.0 #5 0x00007fca7aa44a3f in start_thread () from /lib64/libpthread.so.0 #6 0x00007fca797fc67d in clone () from /lib64/libc.so.6 #7 0x0000000000000000 in ?? () Thread 2 (Thread 0x7fca5f3a2700 (LWP 3953)): #0 0x00007fff3ddd4851 in clock_gettime () #1 0x00007fca768d42b3 in clock_gettime () from /lib64/librt.so.1 #2 0x00007fca7ad268d2 in do_gettime (frac=<optimized out>, sec=<optimized out>) at tools/qelapsedtimer_unix.cpp:123 #3 qt_gettime () at tools/qelapsedtimer_unix.cpp:140 #4 0x00007fca7ade9c4d in QTimerInfoList::updateCurrentTime (this=0x7f1950) at kernel/qeventdispatcher_unix.cpp:339 #5 0x00007fca7ade9fc5 in QTimerInfoList::timerWait (this=0x7f1950, tm=...) at kernel/qeventdispatcher_unix.cpp:442 #6 0x00007fca7ade8a8c in timerSourcePrepareHelper (src=<optimized out>, timeout=0x7fca5f3a1c4c) at kernel/qeventdispatcher_glib.cpp:136 #7 0x00007fca7ade8b35 in timerSourcePrepare (source=<optimized out>, timeout=<optimized out>) at kernel/qeventdispatcher_glib.cpp:169 #8 0x00007fca76623087 in g_main_context_prepare () from /lib64/libglib-2.0.so.0 #9 0x00007fca76623fa9 in ?? () from /lib64/libglib-2.0.so.0 #10 0x00007fca76624650 in g_main_context_iteration () from /lib64/libglib-2.0.so.0 #11 0x00007fca7ade9286 in QEventDispatcherGlib::processEvents (this=0x7ef4a0, flags=<optimized out>) at kernel/qeventdispatcher_glib.cpp:424 #12 0x00007fca7adbd8d2 in QEventLoop::processEvents (this=<optimized out>, flags=...) at kernel/qeventloop.cpp:149 #13 0x00007fca7adbdae5 in QEventLoop::exec (this=0x7fca5f3a1de0, flags=...) at kernel/qeventloop.cpp:201 #14 0x00007fca7acd27a4 in QThread::exec (this=<optimized out>) at thread/qthread.cpp:492 #15 0x00007fca7ad9f008 in QInotifyFileSystemWatcherEngine::run (this=0x7ef420) at io/qfilesystemwatcher_inotify.cpp:248 #16 0x00007fca7acd5095 in QThreadPrivate::start (arg=0x7ef420) at thread/qthread_unix.cpp:320 #17 0x00007fca7aa44a3f in start_thread () from /lib64/libpthread.so.0 #18 0x00007fca797fc67d in clone () from /lib64/libc.so.6 #19 0x0000000000000000 in ?? () Thread 1 (Thread 0x7fca7c0f2760 (LWP 3901)): [KCrash Handler] #6 0x00007fca7975bab5 in raise () from /lib64/libc.so.6 #7 0x00007fca7975cfb6 in abort () from /lib64/libc.so.6 #8 0x00007fca79754385 in __assert_fail () from /lib64/libc.so.6 #9 0x00007fca5d851a49 in snd_hctl_handle_event (event=0x7fff3dd745c0, hctl=0x87a910) at hcontrol.c:764 #10 snd_hctl_handle_events (hctl=0x87a910) at hcontrol.c:793 #11 0x00007fca5d85ca19 in snd_mixer_handle_events (mixer=0x87a980) at mixer.c:847 #12 0x00007fca5db03f39 in Mixer_ALSA::prepareUpdateFromHW (this=0x87d1d0) at /usr/src/debug/kdemultimedia-4.6.1/kmix/backends/mixer_alsa9.cpp:571 #13 0x00007fca5db1b297 in Mixer_Backend::readSetFromHW (this=0x87d1d0) at /usr/src/debug/kdemultimedia-4.6.1/kmix/backends/mixer_backend.cpp:103 #14 0x00007fca5db1b1fd in Mixer_Backend::qt_metacall (this=0x87d1d0, _c=QMetaObject::InvokeMetaMethod, _id=<optimized out>, _a=0x7fff3dd74800) at /usr/src/debug/kdemultimedia-4.6.1/build/kmix/mixer_backend.moc:82 #15 0x00007fca7add2a5f in QMetaObject::activate (sender=0x8bd0f0, m=<optimized out>, local_signal_index=<optimized out>, argv=0x0) at kernel/qobject.cpp:3278 #16 0x00007fca7add96cf in QSingleShotTimer::timerEvent (this=0x8bd0f0) at kernel/qtimer.cpp:308 #17 0x00007fca7add20a9 in QObject::event (this=0x8bd0f0, e=<optimized out>) at kernel/qobject.cpp:1181 #18 0x00007fca79f69144 in QApplicationPrivate::notify_helper (this=0x6ad5f0, receiver=0x8bd0f0, e=0x7fff3dd74fb0) at kernel/qapplication.cpp:4462 #19 0x00007fca79f716fa in QApplication::notify (this=<optimized out>, receiver=0x8bd0f0, e=0x7fff3dd74fb0) at kernel/qapplication.cpp:4341 #20 0x00007fca7ba63d46 in KApplication::notify (this=0x7fff3dd75370, receiver=0x8bd0f0, event=0x7fff3dd74fb0) at /usr/src/debug/kdelibs-4.6.1/kdeui/kernel/kapplication.cpp:311 #21 0x00007fca7adbe47c in QCoreApplication::notifyInternal (this=0x7fff3dd75370, receiver=0x8bd0f0, event=0x7fff3dd74fb0) at kernel/qcoreapplication.cpp:731 #22 0x00007fca7adebdf8 in sendEvent (event=0x7fff3dd74fb0, receiver=<optimized out>) at kernel/qcoreapplication.h:215 #23 QTimerInfoList::activateTimers (this=0x6b12f0) at kernel/qeventdispatcher_unix.cpp:619 #24 0x00007fca7ade8b54 in timerSourceDispatch (source=<optimized out>) at kernel/qeventdispatcher_glib.cpp:184 #25 0x00007fca76623bd3 in g_main_context_dispatch () from /lib64/libglib-2.0.so.0 #26 0x00007fca766243b0 in ?? () from /lib64/libglib-2.0.so.0 #27 0x00007fca76624650 in g_main_context_iteration () from /lib64/libglib-2.0.so.0 #28 0x00007fca7ade922f in QEventDispatcherGlib::processEvents (this=0x617ca0, flags=<optimized out>) at kernel/qeventdispatcher_glib.cpp:422 #29 0x00007fca7a00ebae in QGuiEventDispatcherGlib::processEvents (this=<optimized out>, flags=<optimized out>) at kernel/qguieventdispatcher_glib.cpp:204 #30 0x00007fca7adbd8d2 in QEventLoop::processEvents (this=<optimized out>, flags=...) at kernel/qeventloop.cpp:149 #31 0x00007fca7adbdae5 in QEventLoop::exec (this=0x7fff3dd752c0, flags=...) at kernel/qeventloop.cpp:201 #32 0x00007fca7adc1f2b in QCoreApplication::exec () at kernel/qcoreapplication.cpp:1008 #33 0x00007fca69b856d7 in kdemain (argc=1, argv=0x670e80) at /usr/src/debug/kdelibs-4.6.1/kded/kded.cpp:925 #34 0x00000000004075c9 in launch (argc=1, _name=0x40b4dd "kded4", args=<optimized out>, cwd=0x0, envc=<optimized out>, envs=<optimized out>, reset_env=false, tty=0x0, avoid_loops=false, startup_id_str=0x40b357 "0") at /usr/src/debug/kdelibs-4.6.1/kinit/kinit.cpp:734 #35 0x0000000000409dee in main (argc=4, argv=0x7fff3dd763d8, envp=0x7fff3dd76400) at /usr/src/debug/kdelibs-4.6.1/kinit/kinit.cpp:1849 -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

7 26

[opensuse-kde] [Bug 267636][Fixed] KDE Qtcurve crash fixed upstream in 4.6.1
by Roman Bysh 19 Mar '11

19 Mar '11

Hello all, The bug https://bugs.kde.org/show_bug.cgi?id=267636 with QtCurve has been fixed upstream with 4.6.1 It no longer crashes when switching presets. And, no longer crashes when importing ".qtcurve" schemes. -- Cheers! Roman -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 0

[opensuse-kde] Icons of applications "minimized" to system tray not visible
by Mark Goldstein 19 Mar '11

19 Mar '11

Clean install of oS 11.4 / KDE 4.6 (32-bit version). I can't see the icons of the applications that minimize themselves to system tray. I noticed it with krusader, but then tried another application with the same effect. I tried setting the "visibility" for krusader and another application to "always visible" and it did not help. BTW, krusader disappeared from the list of "entries" after that, though it was still running. I've found the bug #68052: https://bugzilla.novell.com/show_bug.cgi?id=680521 , describing this situation, but the reporter closed it as "Resolved" after his system magically cured itself. I've also seen the discussions on oS 11.3+KDE4.6 exhibiting this issue, but the solution there was removing the factory repos. I do not have any. I've attached the screenshot illustrating this issue and my list of repositories to the bug. Somebody else experienced this issue? Should I re-open the bug? Regards, -- Mark Goldstein -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 0

[opensuse-kde] How to add an application ot the panel in KDE 4.x???
by Alexander Beck-Ratzka 18 Mar '11

18 Mar '11

Hi Folks, I want to add a program button to the KDE panel. However, this is not as easy as it was in 3.x. As fr as I can see, I can only add widgets tp the panel, and in this widgets I don't find any program buttons as Eclipse, XEmacs or Kmail. Under KDE 3.x it was possible to add complete program menues to the panel. E.g I have added Eclipse as a menue, and in this menue contained three different Eclipse programs. How can I add applications seen with "kmenuedit" to the KDE panel under 4.x? Cheers Alexander -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

8 10

[opensuse-kde] PolikcyKit permission problem
by auxsvr＠gmail.com 18 Mar '11

18 Mar '11

Hi, Running oS11.4, the permission settings in System settings / Actions policy are ignored, leading to error messages such as "System policies prevent you from getting the brightness level" in a dialog box asking for root's password every time the screensaver stops, and similar error messages when attempting to mount removable media. Has anyone else seen this? Any hints to fix this are welcome. Regards, Peter -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 4

[opensuse-kde] Packaging question: cannot resolve... in KDE:Distro:Stable
by Klaas Freitag 17 Mar '11

17 Mar '11

Hi, in home:kfreitag:Kraft I build kraft for quite some repos, in preparation to move kraft to KDE:Extra soon. One thing I do not understand is an unresolvable happening in KDE:Distro:Stable for 11.2 and 11.3: nothing provides libqt4-sql = 4.7.2 needed by libqt4-sql-mysql The Requires in the spec are: BuildRequires: libctemplate-devel BuildRequires: libkde4-devel libkdepimlibs4-devel BuildRequires: update-desktop-files %kde4_runtime_requires %kde4_pimlibs_requires %kde4_akonadi_requires Requires: python-trml2pdf pdftk libqt4-sql-sqlite so I do not see how the bug happens nor how I can fix it. Thanks for hints, Klaas -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 2

[opensuse-kde] openSUSE 11.5 KDE Team planning meeting
by Will Stephenson 16 Mar '11

16 Mar '11

Shape the future. 1700 UTC Thursday 17 March #opensuse-kde on Freenode -- Will Stephenson, openSUSE Team SUSE LINUX Products GmbH - Nürnberg - AG Nürnberg - HRB 16746 - GF: Markus Rex -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 2

[opensuse-kde] Translation files for devicenotifier
by Andrea Turrini 15 Mar '11

15 Mar '11

Hi all, when you plug a removable device, device notifier pop ups and allows user to choose the action to perform. For instance, for a pendrive, you can Open with File Manager, Download Photos with Gwenview or Download Photos with digiKam. Now, my question is: what are the translation files involved in these choices? As you can see in this screenshot (http://img4.imageshack.us/i/file1c.jpg/) some strings are correctly translated in Italian, while others are still in English. However, as far as I know, the strings are translated upstream as well as in update-desktop-files files from berlios' lcn repository. So, how can I check whether correct translation is used? Thanks, Andrea -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 2

[opensuse-kde] Problems with KDE 4.6.1 - oS 11.4
by Andrea Turrini 15 Mar '11

15 Mar '11

Hi all, I have installed oS 11.4 formatting / but keeping /home. Then I have added the K:R:46 repo (and the corresponding Extra repo) and given a "zypper dup -r K:R:46 -r :K:R:46-extra". It completed the update without errors and then I rebooted the laptop. After the reboot, kdm starts correctly but when I try to log in, the screen becomes black and then I obtain again kdm screen. The behaviour is similar to when / partition is full but I have enough space in / and /home, so it is not this the cause. Now I have disabled the two repos, given another "zypper dup" and KDE starts correctly and I am using it now. File .xsession-errors does not provide me any useful information: the content is equal to the initial part of the current one (it contains only 6 rows of text about xim and dummy input method "none"), as well as /var/log/Xorg.0.log. Do you have any suggestion about this behaviour? How to solve it, how to collect info, ... Regards, Andrea -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 3

[opensuse-kde] KDE meeting on 16th March 15:00 UTC
by Raymond Wooninck 14 Mar '11

14 Mar '11

Hello everybody! We had some issues with our last few meetings (lack of time, unable to attend,etc), but we will give it a new try this week. The next openSUSE KDE Team meeting will be held on Wednesday, 16th March at 15:00 UTC. For discussion this week: * announcement and marketing rally for 11.4 (remur_030) * Going forward with KDE:Unstable:SC (tittiatcoke) Generic all-time topics: * old action items * status report * Q&A, misc Further items are appreciated; please add them and your IRC nick to http://en.opensuse.org/openSUSE:KDE_Meetings Please use http://www.timeanddate.com/worldclock/fixedtime.html?year=2011&month=3&day=… to get the time of the meeting in your time zone. The meeting will happen in #opensuse-kde IRC channel on irc.freenode.net (feel free to add yourself to the list of people who should be notified before the meeting, at http://en.opensuse.org/openSUSE:KDE_meetings_ping_list) Everyone is welcome to join in and participate! -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 0

[opensuse-kde] KDE 4.6.1 in KDE:/Distro:/Factory for openSUSE 11.4?
by phanisvara das 14 Mar '11

14 Mar '11

just wondering why 4.6.1 doesn't show up in the K:D:F repos for oS 11.4, while it's already in those for 11.3 and oS factory, per example? is there any specific reason, or just timing of the update process and/or mirror refresh? -- phani. -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

4 8

[opensuse-kde] qtjambi
by Sascha Manns 13 Mar '11

13 Mar '11

Hallo Will, ich habe nur eine kleine Frage. Hast du schonmal irgendwo ein qtjambi Paket in unseren Repos gefunden? Scheint so, als müsste ich dies zum bauen von nevernote benötigen... EInen schönen Wochenanfang wünscht Sascha -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Web: http://saigkill.homelinux.net German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 0

[opensuse-kde] kmail not opening
by Bob S 13 Mar '11

13 Mar '11

Hello SuSE people, 11.4 x86 64 now GM with KDE4,6 Ever since I installed 11.4 (RC1?) several months back I have not been able to start Kmail. I just hoped that with each upgrade it would cure itself. Well it has not. When I try to open it I get the following message: Unable to run command specified The file or folder does not exist. file:///usr/share/applications/kde4/KMail2.desktop Well that is correct. It does not. However, I do have a file KMail.desktop and when I click on that it opens the Kmail wizard and the Kmail itself. How to fix??? Bob S -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 3

[opensuse-kde] Compiling smb4k-0.10.10 on SuSE 11.4 fails CMAKE with unable to find kde4_install_icons
by Paul Hands 12 Mar '11

12 Mar '11

Hi KDE Gurus, Can anyone tell me which package is needed to compile smb4k. Currently, the CMAKE step fails with.... CMake Error at icons/CMakeLists.txt:1 (kde4_install_icons): Unknown CMake command "kde4_install_icons". I think I have all the relevant devel packages installed, and I can compile other KDE packages, but clearly something is missing. Google hasn't been very helpful, so I wondered if any of you guys has a suggestion? TIA Paul -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 1

[opensuse-kde] Kaddressbook not working
by Ralph DeWitt 12 Mar '11

12 Mar '11

Hi: I just completed a install of 11.4 on a new machine. I copied my home directory from my old machine. My problem is that I am unable to get kaddressbook to start. Kontact seems to start and brings in mail, calandar and to-do's work. Have not tried notes, journal and feeds yet. Can some one help get address book working. -- Ralph -- Ralph -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 4

[opensuse-kde] 4.6.1
by Anders Johansson 10 Mar '11

10 Mar '11

Are we waiting for 11.4 to get released before building 4.6.1? Anders -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

4 4

[opensuse-kde] Meetings
by Sascha Manns 10 Mar '11

10 Mar '11

Hello Mates, some questions reaches the Weekly News Team about missing Informations about Meetings. In the past we had introduced that a Meetings comes and after that we published the Link to the last Transcript. Sadly is looks like not every Meeting is added to the calendar, so that means that each possible attendee must search when the next Meeting will be held. And as example some Pages like: * http://en.opensuse.org/openSUSE:KDE_meeting * http://en.opensuse.org/openSUSE:GNOME_meeting * http://en.opensuse.org/openSUSE:Marketing_meeting needs an update. So i want to motivate all Meeting holders to add their Meetings to the Calendar and after that adding the Link to the transcript to the Meetings Page. Just my 2 cents ;-) cu Sascha -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Web: http://saigkill.homelinux.net German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 0

[opensuse-kde] How much of KDEPIM usability is restored in KDE4.6?
by Bob Smits 10 Mar '11

10 Mar '11

Can anyone tell me briefly how much of KDEPIM's usability is restored in KDE 4.6? I'm particularly interested in having my address book and calendar work properly. -- Robert Smits Email bob(a)rsmits.ca -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

5 4

[opensuse-kde] Ksysguard as root
by Hans de Faber 09 Mar '11

09 Mar '11

Hello everybody, I've put the the ksysguard icon on my desktop and configured it to run as root. That works fine, but after a few seconds the desktop freezes and I get the errormessage : Error Launching /home/......./ksysguard.desktop either Klauncher is not running anymore. After OK evething runs as it should. How do i get rid is this errormessage ? Thanks, Hans -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 2

Re: [opensuse-kde] Ksysguard as root Solved
by Hans de Faber 09 Mar '11

09 Mar '11

>> Hello everybody, >> I've put the the ksysguard icon on my desktop and configured it to run >> as root. >> That works fine, but after a few seconds the desktop freezes and I get >> the errormessage : >> >> Error Launching >> /home/......./ksysguard.desktop >> either Klauncher is not running anymore. >> >> After OK evething runs as it should. >> How do i get rid is this errormessage ? >> >> Thanks, Hans > > Sounds like > https://bugzilla.novell.com/show_bug.cgi?id=514056 > > Basicly kde apps want a dbus session for the user, root has no active dbus > session so it fails. > > > Cheers, > Karsten Good hint, so I put a dbus-launch in front of the command, problem solved -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 0

[opensuse-kde] Fix for Network Manager wireless
by todd rme 07 Mar '11

07 Mar '11

There is a suggested patch to fix a major problem in Network Manager that I thought I should pass along. From the blog post http://lamarque-lvs.blogspot.com/2011/03/plasma-nm-big-feature.html "Before that I must say that there is a bug in Solid's NetworkManager backend, it does not emit the wirelessHardwareEnabledChanged signal. Without that signal the "Enable wireless" checkbox does not work as expected, sometimes it gets disabled (read-only), so I suggest that distribution packagers apply this one line patch to fix the problem. The patch will be available in KDE SC 4.6.2." https://projects.kde.org/projects/kde/kdebase/kde-workspace/repository/revi… -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 0

[opensuse-kde] Problem with amarok 2.4.0 and phonon-gstreamer 4.4.4
by Alfonso Castro 04 Mar '11

04 Mar '11

Hi. I am using OpenSuSE 11.3 with KDE 4.6 from Release. I probed to use phonon- gstreamer 4.4.4 because the posts in the list about maintaners leaving phonon- xine. However, I have a problem with amarok 2.4.0 and phonon-gstreamer 4.4.4. I have my music in M4A (LE AAC, CBR 256) if I select gstreamer in files don't show the music in this format. How can I resolve this problem? Thanks in advance. Alfonso -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 3

[opensuse-kde] Qt4.7 repo needed for Kde:/Distro:/Factory?
by phanisvara das 03 Mar '11

03 Mar '11

i've asked this on the KDE mailing list already, but now i think opensuse-kde is a better place. when some KDE packages came up for update today, most of them showed unresolveable dependencies for libqt-x11 >= 4.7.2. i found these in KDE:/Qt47, added the repo, and solved the dependencies with vendor change. wondering if this is a permanent requirement, or perhaps my mirror didn't have the latest libqt-x11 available yet? -- phani. openSUSE 11.4 KDE:/Distro:/Factory, and now also KDE:/Qt47 -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

4 4

[opensuse-kde] repositories KDE Stable for openSUSE 11.2 and 11.3
by Joachim Geiger 03 Mar '11

03 Mar '11

Hi all, YAST2 lists almost all packages of my KDE-installation as missing and a look in the repositories for the KDE 4.4 (the stable one) shows that almost all files are gone, only a small rest remained. Could anyone explain what has happened and/or what is going on and/or planned. Best regards, Joachim Geiger -- Joachim Geiger --------------------------------@\\ Max-Planck-Institute for Plasma Physics, @\\ Euratom Association \\\ Department Stellaratortheorie (ST) \\\__ Wendelsteinstr. 1 ( \\ \ D-17491 Greifswald, Germany \_ \\(_ Tel.: ++49 3834/88-2327 Fax: ++49 3834/88-2409 ) \\ \ e-mail: joachim.geiger(a)ipp.mpg.de \ - | --------------------------------------------------- \____/ -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

3 3

[opensuse-kde] filelight and contrib
by todd rme 03 Mar '11

03 Mar '11

It looks like filelight is no longer in contrib, which is breaking the building in KDE:Extra (which links to the version in contrib). This means filelight is not being built at all. -Todd -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

2 1

[opensuse-kde] recoll links don't work
by johnm_s2 02 Mar '11

02 Mar '11

11.4 RC1 x86_64 recoll 1.15.1-1.3 from KDE:Extra factory The hyperlinks in the search results aren't working for me. Click and nothing happens. (Preview, Open, Next) Anyone else? -johnm -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 1

[opensuse-kde] Qtcurve-->Configure Agua Preset to Curve Preset causes plasma desktop to crash on RC2
by Roman Bysh 02 Mar '11

02 Mar '11

On 02/28/2011 06:08 PM, Roman Bysh wrote: > Hello Listmates, > > I have installed KDE 4.6.0 openSUSE 11.4 RC2 > > Every time I select Qtcurve -->Configure--> Aqua OK and Apply. > > Then Qtcurve -->Configure--> Curve OK and Apply. This preset change > causes the plasma desktop to crash every time including kwin, akonadi, > nepomuk.... > > I had to press CTRL+ALT+DEL twice to exit the crash and log back in again. > > My graphics card is a GeForce 8600 GTS > Nvidia driver NVIDIA-Linux-x86_64-270.29.run used. > > Reproducible: Always > > Steps to Reproduce: > 1. Select Configure Desktop --> Application Appearance > 2. Select Qtcurve -->Configure--> Aqua OK and Apply > 3. Select Qtcurve -->Configure--> Curve OK and Apply > 4. Plasma desktop crashes > > Please see Bugzilla link: > > https://bugzilla.novell.com/show_bug.cgi?id=675651 > > > I uninstalled the driver and switched to nouveau. However, the problem still exists with switching from Agua to Curve presets. I'm getting a black background with 55 pop ups. Regards, Roman -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kde+help(a)opensuse.org

1 1