December 2003 - openSUSE KDE - openSUSE Mailing Lists

Re: [suse-kde] HP PSC 1110 and Suse 9.0
by Graham Smith 09 Dec '03

09 Dec '03

On Tue, 9 Dec 2003 08:52, NeF17 wrote: > Hi my problem is that the printer is installed in the System and i can send > commands to the print, Suse 9.0 can find the printer and it is display in > Yast2. i installed it over the ptal driver and its called like : > ptal:/mlc:usb:psc_1100_series > > but if i goto print something he doesn't do anything. this is an all in one > printer and the scanning function works really fine. > The Printer always displayed in the KDE controlcentre a small red "! " > before the printer name. I think something is wrong with the connection > between the OS and the printer. Do you know how i can check this or how i > must configure this part. The driver are installed right an PTAL finds the > printer. Sorry i am a newbie but if you give me direct commands i think i > can install the printer > > Thx a lot > > Stefan Please keep this on the SuSE list, as others may have a better idea on how to get this printer working. Well I know nothing about that printer. How does it interface to the computer? Parallel Port or USB? If it is USB, try looking under Yast---> Hardware ---> hardware info ---> USB and see if your printer is listed. Unplug & replug the USB cable in and see if there are any entries in /var/log/messages when you do it. Also check in the same file for entries relating to "hotplug" when you last booted. BTW you need to be root when looking at the above file, your best bet is from the Kmenu --->System -->File manager--->File Manager Super User If parallel port have a look and see if you have the parallel port modules loaded. THe command is "lsmod" check for modules entries like the following lp 6304 0 (autoclean) parport_pc 28680 1 parport 25608 1 [lp parport_pc] That is about all the advice I can offer. -- Regards, Graham Smith ---------------------------------------------------------

1 0

Ricoh Caplio RR30
by NeF17 08 Dec '03

08 Dec '03

Hi ich habe die Ricoh Caplio RR30 und würde diese gerne unter Suse 9.0 verwenden ich will nur die bilder auslesen leider weiß ich nicht wie der Befehl : als root: mount -t vfat /dev/sda1 /mnt hat nicht geklappt mit sda1-15 der KDE-Gerätemanager findet das Gerät aber draufzugreifen kann ich leider nicht. Vielleicht hat jemand ja schin damit erfahrung? Einen Kartenleser will ich mir eigentlich nicht kaufen Mfg Stefan Schulze

2 1

HP PSC 1110
by NeF17 08 Dec '03

08 Dec '03

Hi ich benutze Suse 9.0 und habe einen HP PSC 1110 über USB angeschlossen. Die Scanfunktion klappt super, aber drucken macht er leider nicht ich habe das Gerät mit den hpoj-0,91 treibern installiert und unter Cups eingerichtet. also der drucker wird über ptal:/mlc:usb:psc_1100_series abngesprochen. Ich kann zwar alle sachen einstellen also druckqualität und so aber wenn er eine seite drucken soll setzt er die zwar in die warteschlange aber fängt nicht an. wenn ich den Drucker unter KDE-Kontrollzentrum auf "Drucker starten" setze dann nimmt er den status an aber nach kurzer Zeit steht da wieder ein rotes Ausrufezeichen. Ich bin newbie kann also sein das ich vielleicht vorher noch eine Einstellung habe. Wie kann ich das checken oder was muss richtig eingestellt sein?? Mfg Stefan Schulze

1 0

HP PSC 1110 and Suse 9.0
by nef17＠gmx.net 08 Dec '03

08 Dec '03

Hi I have got a HP PSC 1110 All in One Printer i am using Suse 9.0. I can scan with this printer but if I send a document to print to this Printer I get no response. Can anyone tell me if he made it?? And how??? Thx a lot Nef17

3 2

Re: [suse-kde] Open Office Labels
by FX Fraipont 08 Dec '03

08 Dec '03

James Mohr wrote: > Hi All! > > I am trying to develop an easy way for my son to create printed flash > cards. I'm starting with an open office spreadsheet which is filled > out in two columns. > Why don't you use the Drawing module? Define a template with the number of cards you get on a full sheet, then on each card draw a text frame that you can then fill with any text you want. CTRL+A selects the whole text, even what has disappeared into never-never land, as you say, and change the font size so that it all fits in your frame. fxf -- ______________________ Courtesy of SuSE Linux http://www.nibz.org

2 1

Lilo und Raid-Controller
by nef17＠gmx.net 07 Dec '03

07 Dec '03

Hi Ich habe Suse 9.0 auf einer 10GB Platte installiert und außerdem auf einer 2ten 80GB Platte mein WinXP, die beiden Platten hängen an einem Highpoint HPT 374 Raid-Controller. Und werden über Lilo gebootet. Suse 9.0 kann ohne Problem gebootet werden, aber wenn ich im Bootmanager Windows anwähle, kann er WinXP nicht booten. Was muss unter Windows im Bootloader für Einstellungen stehen?? Mit freundlichen Grüßen Stefan Schulze

2 1

Open Office Labels
by James Mohr 07 Dec '03

07 Dec '03

Hi All! I am trying to develop an easy way for my son to create printed flash cards. I'm starting with an open office spreadsheet which is filled out in two columns. On the second sheet, the cells from the first sheet are placed in the order they should be to print out as labels, which I want to print out to a page of pre-perforated business cards. So, I am loading these as a set of lables in a regular document. The problem is that the labels in the Open Office document can only contain a certin number of lines. Unlike other programs (i.e. Word Perfect for Windows), the extra lines are pushed into never-never land and not into the next cell. I was hoping to be able to simply add the necessary number of newlines manually to push the text into the appropriate cell. However, this is not working. Is this making sense? Is there a way to do this with open office or am I stuck with using Windows products? Regards, jimmo -- --------------------------------------- "Be more concerned with your character than with your reputation. Your character is what you really are while your reputation is merely what others think you are." -- John Wooden --------------------------------------- The Linux Tutorial needs your help! Visit us at http://www.linux-tutorial.info

4 4

IDE Cable & Audio CD
by Mike Béla 07 Dec '03

07 Dec '03

HI! My question is not related expressly to the KDE technology. I can listen audio CD-s under (SuSE) Linux only if the CD-ROM driver is connected with my soundcard by an (analogue) audio cable. Is it possible to listen audio CD-s without the connection just mentioned, only with the aid of IDE cable connection??? (This method was practicable under Window$ XP.) Best regards, Béla

3 3

Attention!
by Matteo 07 Dec '03

07 Dec '03

Gunnar Salbeck you are welcome to ask about something if you write in english , this is an english group , not a german group.Thanks. -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

2 1

KBear Crash?
by Gunnar Salbeck 06 Dec '03

06 Dec '03

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hallo Ich arbeite zur Zeit recht viel mit Kbear. Leider stürzt das Programm recht häufig ab. :-( Kann mir vielleicht jemand sagen, was da schief läuft? Dankeschön...:-) Ich häng mal die Fehlermeldung dran... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)...[New Thread 16384 (LWP 24563)] (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... 0x41042cf7 in waitpid () from /lib/libpthread.so.0 #0 0x41042cf7 in waitpid () from /lib/libpthread.so.0 #1 0x4074cc89 in KCrash::defaultCrashHandler(int) () from /opt/kde3/lib/libkdecore.so.4 #2 0x41041895 in __pthread_sighandler () from /lib/libpthread.so.0 #3 <signal handler called> #4 0x40d66b19 in QString::QString(QString const&) () from /usr/lib/libqt-mt.so.3 #5 0x4072329b in KIconEffect::fingerprint(int, int) const () from /opt/kde3/lib/libkdecore.so.4 #6 0x40732229 in KIconFactory::createPixmap(QIconSet const&, QIconSet::Size, QIconSet::Mode, QIconSet::State) () from /opt/kde3/lib/libkdecore.so.4 #7 0x40aa2e3a in QIconSetPrivate::icon(QIconSet const*, QIconSet::Size, QIconSet::Mode, QIconSet::State) () from /usr/lib/libqt-mt.so.3 #8 0x40aa37cb in QIconSet::pixmap(QIconSet::Size, QIconSet::Mode, QIconSet::State) const () from /usr/lib/libqt-mt.so.3 #9 0x405a944a in KToolBarButton::drawButton(QPainter*) () from /opt/kde3/lib/libkdeui.so.4 #10 0x40b608f6 in QButton::paintEvent(QPaintEvent*) () from /usr/lib/libqt-mt.so.3 #11 0x40b0ea92 in QWidget::event(QEvent*) () from /usr/lib/libqt-mt.so.3 #12 0x40a775f8 in QApplication::internalNotify(QObject*, QEvent*) () from /usr/lib/libqt-mt.so.3 #13 0x40a76b50 in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libqt-mt.so.3 #14 0x406d9929 in KApplication::notify(QObject*, QEvent*) () from /opt/kde3/lib/libkdecore.so.4 #15 0x40a490b5 in QWidget::repaint(int, int, int, int, bool) () from /usr/lib/libqt-mt.so.3 #16 0x405a8dce in KToolBarButton::enterEvent(QEvent*) () from /opt/kde3/lib/libkdeui.so.4 #17 0x40b0ea6a in QWidget::event(QEvent*) () from /usr/lib/libqt-mt.so.3 #18 0x40a775f8 in QApplication::internalNotify(QObject*, QEvent*) () from /usr/lib/libqt-mt.so.3 #19 0x40a76b50 in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libqt-mt.so.3 #20 0x406d9929 in KApplication::notify(QObject*, QEvent*) () from /opt/kde3/lib/libkdecore.so.4 #21 0x40a78fc9 in qt_dispatchEnterLeave(QWidget*, QWidget*) () from /usr/lib/libqt-mt.so.3 #22 0x40a15d81 in QApplication::x11ProcessEvent(_XEvent*) () from /usr/lib/libqt-mt.so.3 #23 0x40a2b4f2 in QEventLoop::processEvents(unsigned) () from /usr/lib/libqt-mt.so.3 #24 0x40a8bb83 in QEventLoop::enterLoop() () from /usr/lib/libqt-mt.so.3 #25 0x40a8ba76 in QEventLoop::exec() () from /usr/lib/libqt-mt.so.3 #26 0x40a7787f in QApplication::exec() () from /usr/lib/libqt-mt.so.3 #27 0x0804ddf4 in QFrame::paintEvent(QPaintEvent*) () #28 0x411868ae in __libc_start_main () from /lib/libc.so.6 - -- Mit freundlichen Grüßen Gunnar Salbeck ++ GnuPG Frau&Kind ICQ(162837078) vorhanden ++ Key auf Anfrage.....ändert sich ständig :-| -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2-rc1-SuSE (GNU/Linux) iD8DBQE/0gk8Kqo9GUyFpKYRAo92AJ4zEgXKoX+j/wdbsev6C2Y/JLtOEQCfRgpT 8L4/1Ilt2V7o6aDSlBAiRc8= =7Uhn -----END PGP SIGNATURE-----

1 0