June 2002 - openSUSE KDE - openSUSE Mailing Lists

Re: [SLE] nVidia Drivers, Asus V770 And SuSE 8.0
by Dave Barton 22 Jun '02

22 Jun '02

On Fri, 2002-06-21 at 15:42, Salman Khilji wrote: > I have nVidia GeForce2 MX card. When I configure my card with Yast2, and > click on the Test button, the screen goes blank. Then I hit Escape and > everything returns to normal. Eventhough, the Test fails, X seems to be > working just fine. > > Also when I want to log off and log back in as a differnt user, the screen > goes blank and does not return till I hit Esc. > > Strange problems with nVidia. > > Salman Thanks for the reply Salman, but when my screen blanks out, hitting Escape or any other key(s) does not get me back to anything. Even with the nVidia drivers (apparently) loaded I don't get any other screen blanks. It sure is strange that nVidia would release defective drivers. The problem probably only exists on a small number of GeForce cards, so they don't consider it to be something worth bothering to fix. Regards Dave

1 0

Kmail filtering rules
by Nigel Utting 21 Jun '02

21 Jun '02

I want to rebuild my PC, including a disk format, but I do not want to lose my KMail filtering rules. What file/s do I need to save to save the rules? Thanks, Nigel. ===== SuSE 7.2 ===== KDE 3.0.1 ===== KMail 1.4.1 =====

2 1

No mouse pointer for post-installation
by Fred Schiff 21 Jun '02

21 Jun '02

This is probably an install/XFree question, but here goes. I have successfully installed Suse Linux on my machine, and sorta made it a dual boot machine (I think I need to look up how LILO is supposed to operate since I can't figure out how you tell it to boot a different operating system), but in KDE I don't have a mouse pointer, so its hard to choose anything or get rid of the clutter. How do I configure that, in console mode, possibly? I have to finish the post-installation things. Fred Schiff (fschiff(a)mindspring.com)

2 1

Korganizer export web months view
by Pep Serrano 21 Jun '02

21 Jun '02

Hello all, I am trying to export my calendar (month view) on Korganizer to HTML but actually it is only able to export ONE month. I would like to be able to export a calendar for the next three months. Is it possible at all? -- Best Regards, Josep F Serrano http://pep.serrano.net

2 1

KDE3 Sound Problem
by Salman Khilji 20 Jun '02

20 Jun '02

I am using SuSE 8.0 Professinal with KDE 3.0. Updated my system using YOU a few days ago. I installed mplayer from sources and found that the system would refuse to play the movies with sound. I had to fix it by disabling aRTS in the control panel. Now that aRTS is disabled (by disabling the sound server) mplayer is happy but xmms is mad now. XMMS displays an error message that says Please check that: 1. You have the correct output plugin selected. 2. No other programs is blokcing the soundcard 3. Your soundcar is configure properly Question: How do I make mplayer and xmms happy at the same time?

3 2

Fw: Intel Board d850gb (chipset ADI 1885) on SuSE 7.3
by Juan Francisco Torres Chacón 18 Jun '02

18 Jun '02

Ok, this is the story: The standard configuration using YAST2 in SuSE7.3 (just after installation) didn't detected the sound card (or chipset in this case) Finally, I used "alsaconf" in text mode, and it was detected as "Intel 82820 820 Camino2 AC97" I used "gamix" in Xwindows to "unmute" the sound. Sound is playing, BUT 1- Everything is "quicker" than it should. Every sound or song is played a little quicker than normal..... 2- I get the following messages: - xconsole: Jun 14 09:34:31 winlinux kernel: snd: snd_intel8x0_chip_init: invalid AC'97 codec Jun 14 09:34:31 winlinux kernel: snd: Intel ICH soundcard not found or device busy Jun 14 09:36:34 winlinux insmod: insmod: a module named snd-mixer-oss already exists Jun 14 09:36:34 winlinux insmod: insmod: insmod sound-service-0-3 failed - /var/log/boot.msg (messages when the machine boots) /etc/init.d/rc5.d/S21alsasound start Starting sound driver: intel8x0/lib/modules/2.4.10-4GB/misc/snd-card-intel8x0.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.10-4GB/misc/snd-card-intel8x0.o: insmod /lib/modules/2.4.10-4GB/misc/snd-card-intel8x0.o failed /lib/modules/2.4.10-4GB/misc/snd-card-intel8x0.o: insmod snd-card-intel8x0 failed failed <notice>'/etc/init.d/rc5.d/S21alsasound start' exits with status 1 - /var/log/messages Jun 14 09:34:31 winlinux kernel: PCI: Found IRQ 9 for device 00:1f.5 Jun 14 09:34:31 winlinux kernel: PCI: Sharing IRQ 9 with 00:1f.3 Jun 14 09:34:31 winlinux kernel: PCI: Setting latency timer of device 00:1f.5 to 64 Jun 14 09:34:31 winlinux kernel: snd: snd_intel8x0_chip_init: invalid AC'97 codec Jun 14 09:34:31 winlinux kernel: snd: Intel ICH soundcard not found or device busy Jun 14 09:34:31 winlinux kernel: Switching off penguin. Jun 14 09:36:20 winlinux PAM-unix2[975]: session started for user jtorres, service xdm Jun 14 09:36:34 winlinux kernel: PCI: Found IRQ 9 for device 00:1f.5 Jun 14 09:36:34 winlinux kernel: PCI: Sharing IRQ 9 with 00:1f.3 Jun 14 09:36:34 winlinux kernel: PCI: Setting latency timer of device 00:1f.5 to 64 Jun 14 09:36:34 winlinux insmod: insmod: a module named snd-mixer-oss already exists Jun 14 09:36:34 winlinux insmod: insmod: insmod sound-service-0-3 failed - /etc/modules.conf # Alsa sound support. # Warning: please don't modify comments over aliases 'snd-card-#' alias char-major-116 snd alias char-major-14 off options snd snd_cards_limit=1 snd_major=116 options snd-card-intel8x0 snd_index=0 # uniq.virtual:Sound card alias snd-card-0 snd-card-intel8x0 # YaST2: sound system dependent part # alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-11 snd-mixer-oss alias sound-service-0-12 snd-pcm-oss Anyone has any idea? I think the messages from kernel are generated by "alias" and "sound" being all mixed up.. is this true? Thank you all -------------------------------------------------------- Juan Francisco Torres Ch. Desarrollo, Tecnología y Redes NETCO LTDA

1 0

/dev/isdnctrl
by Michael 18 Jun '02

18 Jun '02

Hello. I am having difficulty connecting to the net. When I attempt to run kinternet I get an error message logged as: cannot find /dev/isdnctrl or /dev/isdnctrl is not configured. I have rechecked the configuration of my isdn card and tested it. The test informs me that it was successful. I can connect if I reload Mandrake 7.0 which is what I have done to send this. Your help would be appreciated. Thank you. Michael McGibben.

1 0

Bug? KDE3.x.x and ReflectionX for NT V8.0 and SuSE 8.0
by Richard Stadler 18 Jun '02

18 Jun '02

Hello, We've got the following installation: Server running SuSE 8.0 and some "workstations" using WRQ ReflectionX for NT Version 8.0 with Windows 2000 Prof. If someone uses KDE via Network on his PC, it seems that all programms using the qt-library are crashing with the following line: KCrash: crashing.... crashRecursionCounter = 2 KCrash: Application Name = kcalc path = <unknown> pid = 3878 Alarm clock Now, if we do this: EXPORT LANG=en_US@EURO the programms are running how they should. Any suggestions? Bye, Richard.

1 0

Re: [suse-kde] SuSE KDM backgrounds
by Ron Cordell 17 Jun '02

17 Jun '02

Unfortunately, that is exactly the problem I have - changing things in control center for the background used for KDM has no effect, and I am not sure why. > > I think this happen to me once as well. It seem to be that the newer set > up could not find the background image. I believe it can be remedied in > the controlcenter -> login manager -> backgounds. > > hope that helps. > > bruce -- 10:06pm up 9 days, 13:09, 1 user, load average: 0.15, 0.09, 0.02

3 3

Compromised?
by Carl 17 Jun '02

17 Jun '02

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 . For the past several days I've gotten a finger on my ssl port, once a day. Each time I answered it with an nmap, and each time it was from a different country: China, Taiwan, Australia, and each time the machine was a Suse with kernel 2.1. =Yesterday= when I answered with nmap, he immediately responded with about 15 more fingers on the SSL port before I hung up. I reconnected, and quiet after that. Here's what I saw: sshd-::ffff:61.132.90.10 unknown Date: Thu, 13 Jun 2002 21:17:30 -0500 (CDT) From: root(a)hydra.darkmatter.org (root) To: root(a)hydra.darkmatter.org finger: Connection refused sshd-::ffff:210.243.244.245 root Date: Fri, 14 Jun 2002 19:40:28 -0500 (CDT) From: root(a)hydra.darkmatter.org (root) To: root(a)hydra.darkmatter.org [::ffff:210.243.244.245/::ffff:210.243.244.245] No one logged on. sshd-::ffff:213.227.69.224 unknown Date: Sat, 15 Jun 2002 20:26:16 -0500 (CDT) From: root(a)hydra.darkmatter.org (root) To: root(a)hydra.darkmatter.org finger: Connection refused sshd-::ffff:144.132.25.77 unknown Date: Sun, 16 Jun 2002 11:24:31 -0500 (CDT) From: root(a)hydra.darkmatter.org (root) To: root(a)hydra.darkmatter.org finger: Connection refused After this one I got the 15 from the same place in response to my scan. So obviously he has enough control over these machines to know I'm scanning him. ppp0 Link encap:Point-to-Point Protocol inet addr:64.24.136.21 P-t-P:192.168.254.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:13454 errors:0 dropped:0 overruns:0 frame:0 TX packets:14136 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:5481292 (5.2 Mb) TX bytes:1921173 (1.8 Mb) Yesterday after the onslaught I noticed that suddenly I was sending OUT as much traffic as I was getting IN, while browsing! Could this be a clumsy hijacking? I turned off Squid & Junkbuster, turned off SSL & Apache, tried Konq & Netscape, tried IE through VMware, hung up & reconnected with a different IP, and rebooted. Always sending as much as receiving. hydra:/proc/sys/net/ipv4/conf/ppp0 # cat forwarding 1 There is no place in Yast to set this! Why is this on?! Do I have to turn it off in boot.local? (Setting this off didn't fix the problem) Am I compromised? This doesn't remind me of any compromises I know. Why am I suddenly sending as much as I receive, while I'm receiving? - -- Philosophy will clip an angel's wings. -- John Keats -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAj0ODEkACgkQnQ18+PFcZJs3PACeKSp5Z+M+z8lVbPs5CESu3/4D P/QAnRagSGrJCwCqwix3Kan2WmVPuWMU =6TuZ -----END PGP SIGNATURE-----

1 0