Eine neu eingerichtete DSL-Konfiguration hat nach ca. 11 Tagen Betrieb
ihre Funktion mit den untenstehenden Syslog-Meldungen eingestellt.
System ist ein Original-SuSE-Linux 8.1. Zuvor waren zwei extrem lange
Verbindungszeiten ohne erkennbare Aktivität verzeichnet.
Was sagen mir diese Meldungen? Es sieht irgendwie aus wie ein Kernel-
Fehler.
Nach einem Reboot meldet er beim Hochfahren, daß die Konfiguration
von dsl0 nicht gefunden werden könne. Ein manuelles "rcnetwork start
dsl0" funktioniert aber. Danach sind auch Internetzugriffe möglich.
Jochen
Mar 22 04:46:29 fw2 pppd[1744]: Setting MTU to 1492.
Mar 22 04:46:29 fw2 pppd[1744]: Couldn't increase MRU to 1500
Mar 22 04:46:29 fw2 pppd[1744]: Connection terminated.
Mar 22 04:46:29 fw2 pppd[1744]: Connect time 85.5 minutes.
Mar 22 04:46:29 fw2 pppd[1744]: Sent 51558875 bytes, received 123489676
bytes.
Mar 22 04:46:29 fw2 pppd[1744]: Doing disconnect
Mar 22 04:46:29 fw2 pppd[1744]: sendto returned: Network is down
Mar 22 04:46:29 fw2 kernel: Unable to handle kernel NULL pointer
dereference at virtual address 000000d8
Mar 22 04:46:29 fw2 kernel: printing eip:
Mar 22 04:46:29 fw2 kernel: c2beaaff
Mar 22 04:46:29 fw2 kernel: *pde = 00000000
Mar 22 04:46:29 fw2 kernel: Oops: 0002 2.4.19-4GB #1 Fri Sep 13 13:14:56
UTC 2002
Mar 22 04:46:29 fw2 kernel: CPU: 0
Mar 22 04:46:29 fw2 kernel: EIP:
0010:[hisax:__insmod_hisax_O/lib/modules/2.4.19-4GB/kernel/drivers/isdn+-37836033/96]
Not tainted
Mar 22 04:46:29 fw2 kernel: EIP: 0010:[<c2beaaff>] Not tainted
Mar 22 04:46:29 fw2 kernel: EFLAGS: 00010296
Mar 22 04:46:29 fw2 kernel: eax: c1610ea0 ebx: c0ae5040 ecx:
c0329b88 edx: 00000000
Mar 22 04:46:29 fw2 kernel: esi: c1610ea0 edi: 00000000 ebp:
c46e9f00 esp: c46e9ed4
Mar 22 04:46:29 fw2 kernel: ds: 0018 es: 0018 ss: 0018
Mar 22 04:46:29 fw2 kernel: Process pppd (pid: 1744, stackpage=c46e9000)
Mar 22 04:46:29 fw2 kernel: Stack: c2bebdc0 c4bc4b14 c46e9f00 0000001e
bffffbf8 c0224d26 c4bc4b14 c46e9f00
Mar 22 04:46:29 fw2 kernel: 0000001e 00000002 00000000 00000018
00000000 101a9000 7465bf11 00003068
Mar 22 04:46:29 fw2 kernel: 00000000 00000000 c12f0000 00000000
c1e2b594 c0139ef3 c1e2b480 c46e8000
Mar 22 04:46:29 fw2 kernel: Call Trace:
[hisax:__insmod_hisax_O/lib/modules/2.4.19-4GB/kernel/drivers/isdn+-37831232/96]
[sys_connect+86/128] [kmem_cache_free+19/32] [rm_sig_from_queue+20/32]
[do_sigaction+207/272]
Mar 22 04:46:29 fw2 kernel: Call Trace: [<c2bebdc0>] [<c0224d26>]
[<c0139ef3>] [<c01273e4>] [<c01283af>]
Mar 22 04:46:29 fw2 kernel: [pipe_write+389/704]
[sys_socketcall+139/432] [sys_write+205/256] [system_call+51/64]
Mar 22 04:46:29 fw2 kernel: [<c014c965>] [<c02255fb>] [<c014386d>]
[<c0108e63>]
Mar 22 04:46:29 fw2 kernel: Modules: [(pppoe:<c2bea060>:<c2bebe0c>)]
Mar 22 04:46:29 fw2 kernel: Code: ff 8a d8 00 00 00 0f 94 c0 84 c0 75 19
6a 60 6a 00 56 e8 8a
Mar 22 04:46:29 fw2 modify_resolvconf: Service smpppd tried to modify
resolver configuration, but it
Mar 22 04:46:29 fw2 modify_resolvconf: was not modified due to
MODIFY_RESOLV\NAMED_CONF_DYNAMICALLY=no
Mar 22 04:46:30 fw2 modify_resolvconf: Service pppd tried to modify
resolver configuration, but it
Mar 22 04:46:30 fw2 modify_resolvconf: was not modified due to
MODIFY_RESOLV\NAMED_CONF_DYNAMICALLY=no
Mar 22 04:59:00 fw2 /USR/SBIN/CRON[31636]: (root) CMD ( rm -f
/var/spool/cron/lastrun/cron.hourly)
Mar 22 05:00:07 fw2 named[715]: Cleaned cache of 1 RRset
Mar 22 05:01:00 fw2 named[715]: ns_forw: sendto([194.95.246.252].53):
Network is unreachable
Mar 22 05:21:00 fw2 named[715]: ns_forw: sendto([194.95.246.252].53):
Network is unreachable
Mar 22 05:41:00 fw2 named[715]: ns_forw: sendto([194.95.246.252].53):
Network is unreachable
Mar 22 05:59:00 fw2 /USR/SBIN/CRON[14186]: (root) CMD ( rm -f
/var/spool/cron/lastrun/cron.hourly)
Mar 22 06:01:01 fw2 named[715]: ns_forw: sendto([194.95.246.252].53):
Network is unreachable
Mar 22 06:21:00 fw2 named[715]: ns_forw: sendto([194.95.246.252].53):
Network is unreachable
Mar 22 06:41:00 fw2 named[715]: ns_forw: sendto([194.95.246.252].53):
Network is unreachable
Hallo,
beim Runterfahren bleibt mein Server mit SuSE 8.1 öfters bei "Shutting
down network interfaces:" hängen. Ich habe herrausgefunden das das
Problem beim Stoppen des "SMPPPD" ensteht. Dort wird '/usr/sbin isdnctrl
delif ippp0' ausgeführt, dieser Prozess hängt aber und das System bleibt
beim Runterfahren hängen.
Im Thread "ISDN und kinternet unter SuSE 8.1 = Absturz" gehts vermutlich
um den selben Fehler. Ich hatte auf dem Server KDE nur kurz benutzt,
dass die Tastatur plötzlich nicht mehr reagierte tratt nachvollziehbar
nach ändern der ISDN-Konfiguration in yast auf!
Hardware/Software:
1. CPU Type/Takt + Motherboard(Chipsatz)
AMD 200MHz
2. RAM Groesse
128MB
3. ISDN HW/Treiber
AVM FritzCard ISA non Plug-and-Play
4. kernelversion: uname -a
Den Kernel aus:
k_deflt-2.4.19-174.i586.rpm
5. rpm -q i4l-base
Müsste i4l-base-2003.2.14-1
sein (genaue Infos zu 4.+5. morgen, komm grad nicht an der Server)
Gruß
Ingo
--
'Linux is like a wigwam: no gates, no windows and an apache inside.'
Hallo Liste
nach einiger Zeit surfen im Internet bricht die Datenübertragung ab, es werden
keine Daten mehr aus dem Internet auf meinen Rechner übertragen und
rausschicken kann ich auch nichts mehr.
Hardware
Laptop IBM Thinkpad 600 mit AVM B1-PCMCIA-Karte
Software
SuSE 8.1 Professional mit Standard-Kernel 2.4.19
Konfiguration der AVM-Karte mit YAST2
Internet-Verbindung mit kinternet
Ich habe unten einen Auszug aus meiner /var/log/messages beigefügt, beginnt
mit der Meldung, die beim Herstellen der Verbindung eingetragen wird bis zu
dem Punkt, an dem nichts mehr läuft.
Kann mir jemand weiterhelfen???
Gruß Gerhard
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Feb 8 15:23:28 linux kernel: ippp0: dialing 1 0------...
Feb 8 15:23:28 linux isdnlog: Feb 08 15:23:28 * tei 86 calling 0------ with
+49 6131/------, Mainz RING (Data)
Feb 8 15:23:29 linux isdnlog: Feb 08 15:23:29 tei 86 calling 0192346 with +49
6131/------, Mainz Time:Sat Feb 8 15:16:00 2003
Feb 8 15:23:29 linux isdnlog: Feb 08 15:23:29 tei 86 calling 0------ with +49
6131/------, Mainz COLP *INVALID* -- ignored!
Feb 8 15:23:29 linux isdnlog: Feb 08 15:23:29 tei 86 calling 0------ with +49
6131/------, Mainz CONNECT (Data)
Feb 8 15:23:29 linux isdnlog: Feb 08 15:23:29 tei 86 calling 0------ with +49
6131/------, Mainz INTERFACE ippp0 calling 0------
Feb 8 15:23:29 linux isdnlog: Feb 08 15:23:29 tei 86 calling 0192346 with +49
6131/------, Mainz No area info for provider 33_0 (18), destination 0------
Feb 8 15:23:29 linux kernel: kcapi: appl 1 ncci 0x10101 up
Feb 8 15:23:29 linux kernel: isdn_net: ippp0 connected
Feb 8 15:23:29 linux kernel: capidrv-1: chan 0 up with ncci 0x10101
Feb 8 15:23:29 linux ipppd[5536]: Local number: ------, Remote number:
0------, Type: outgoing
Feb 8 15:23:29 linux ipppd[5536]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0,
linkunit: 0, fd: 14
Feb 8 15:23:29 linux ipppd[5536]: ioctl(SIOCSIFMTU): Invalid argument, 13
ippp0 1524.
Feb 8 15:23:30 linux ipppd[5536]: Remote message:
Feb 8 15:23:30 linux ipppd[5536]: MPPP negotiation, He: Yes We: Yes
Feb 8 15:23:30 linux ipppd[5536]: CCP enabled! Trying CCP.
Feb 8 15:23:30 linux ipppd[5536]: CCP: got ccp-unit 0 for link 0 (Compression
Control Protocol)
Feb 8 15:23:30 linux ipppd[5536]: ccp_resetci!
Feb 8 15:23:30 linux ipppd[5536]: ccp_resetci!
Feb 8 15:23:30 linux kernel: Received CCP frame from peer slot(0)
Feb 8 15:23:30 linux kernel: [0/0].ccp-rcv[0]: 01 01 00 0a 11 06 00 01 01 03
Feb 8 15:23:30 linux kernel: Received CCP frame from daemon:
Feb 8 15:23:30 linux kernel: [0/0].ccp-xmit[0]: ff 03 80 fd 01 01 00 04
Feb 8 15:23:30 linux kernel: Received CCP frame from daemon:
Feb 8 15:23:30 linux kernel: [0/0].ccp-xmit[0]: ff 03 80 fd 04 01 00 0a 11 06
00 01 01 03
Feb 8 15:23:30 linux kernel: Received CCP frame from peer slot(0)
Feb 8 15:23:30 linux kernel: [0/0].ccp-rcv[0]: 04 01 00 04
Feb 8 15:23:30 linux ipppd[5536]: local IP address 212.7.164.238
Feb 8 15:23:30 linux ipppd[5536]: remote IP address 212.7.172.11
Feb 8 15:23:31 linux modify_resolvconf: Service ipppd modified
/etc/resolv.conf. See info block in this file
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x1 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x1 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x0 ???
Feb 8 15:24:16 linux last message repeated 2 times
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x10 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x0 ???
Feb 8 15:24:16 linux last message repeated 2 times
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x10 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x0 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x1 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x0 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x86 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x81 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0xa ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x1 ???
Feb 8 15:24:16 linux last message repeated 3 times
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x0 ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0xcd ???
Feb 8 15:24:16 linux kernel: b1pcmcia-150: b1_interrupt: 0x0 ???
Feb 8 15:24:16 linux last message repeated 2 times
Feb 8 15:24:16 linux kernel: kcapi: msgid 268 ncci 0x10101 not on queue
Feb 8 15:24:16 linux kernel: kcapi: msgid 269 ncci 0x10101 not on queue
Feb 8 15:24:16 linux kernel: kcapi: msgid 270 ncci 0x10101 not on queue
Feb 8 15:24:17 linux kernel: kcapi: msgid 271 ncci 0x10101 not on queue
Feb 8 15:24:17 linux kernel: kcapi: msgid 272 ncci 0x10101 not on queue
Feb 8 15:24:17 linux kernel: kcapi: msgid 273 ncci 0x10101 not on queue
Feb 8 15:24:17 linux kernel: kcapi: msgid 274 ncci 0x10101 not on queue
Feb 8 15:24:17 linux kernel: ippp0: HL driver queue full
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
--
Gerhard Breuel
Neckarstraße 5
55118 Mainz
Tel.: 0 61 31 - 677 836
Hallo zusammen,
wie bekomme ich unter SUSE 7.0 eine Installation von zwei ISDN Karten
(Fritzcard und Fritzcard PCI) hin.
Die eine soll mit der AVM Capi für Hylafax zuständig sein. Die andere soll
für VBOX zuständig sein.
Kann unter Yast ja nur eine angeben.
Weiss jemand bescheid und kann mri auf die Sprünge helfen?
Gruss Günter
--------------------------------------------
PS Automation GmbH
Gesellschaft für Antriebtechnik
Philip-Krämer-Ring 13
67098 Bad Dürkheim
Tel.: 06322/6003-0
Fax.: 06322/6003-20
Hallo!
Mit viel Mühe habe ich mein neu installiertes 7.2 nu am Laufen, jedoch
klappt das Faxen nicht so richtig. Ich habe zwar hylafax-4.1.5 neuinstalliert (von
source), jedoch glaube ich nicht, dass es wirklich daran liegt, da der
Fehler auch auftritt, wenn man ein Tif firekt mit c2faxsend verschickt. Der
Empfang klappt auch nicht.
Hier meine Logs:
/tmp/capifax.log:
Mar 31 21:17:01.38: [ 1686]: CapiFaxSend - INFO: Try to send a fax to number
912274 in TIFF mode.
Mar 31 21:17:01.38: [ 1686]: CapiFaxSend - INFO: Dial and starting transfer
of TIFF-File
/tmp/capi4hylafax/fritz_pic.tif with fine resolution.
Mar 31 21:18:31.49: [ 1688]: CapiFaxSend - INFO: Connection was dropped with
Reason 0x3314
(Disconnected during transfer (remote abort)).
Mar 31 21:18:31.49: [ 1688]: CapiFaxSend - INFO: before Fax was completely
transfered.
Mar 31 21:18:31.50: [ 1688]: CapiFaxSend - INFO: Connection dropped with
Reason 0x3400 (No additional information).
/var/log/messages:
Mar 31 21:19:35 debian isdnlog: Mar 31 21:19:35 * tei 78 calling +49
5251/750356, Paderborn with +49 2902/912274, Warstein RING (3.1 kHz audio)
Mar 31 21:19:36 debian isdnlog: Mar 31 21:19:36 tei 78 calling +49
5251/750356, Paderborn with +49 2902/912274, Warstein CCNR moeglich
Mar 31 21:19:44 debian isdnlog: Mar 31 21:19:44 * tei 127 calling +49
2902/912274, Warstein with ? RING ()
Mar 31 21:19:45 debian isdnlog: Mar 31 21:19:45 tei 78 calling +49
5251/750356, Paderborn with +49 2902/912274, Warstein Time:Mon Mar 31 22:20:00 2003
Mar 31 21:19:45 debian isdnlog: Mar 31 21:19:45 tei 78 calling +49
5251/750355, Paderborn with +49 2902/912274, Warstein COLP +49 5251/750355, Paderborn
Mar 31 21:19:45 debian isdnlog: Mar 31 21:19:45 tei 78 calling +49
5251/750355, Paderborn with +49 2902/912274, Warstein CONNECT (3.1 kHz audio)
Mar 31 21:19:45 debian kernel: kcapi: appl 4 ncci 0x10101 up
Mar 31 21:19:45 debian isdnlog: Mar 31 21:19:45 tei 78 calling +49
5251/750355, Paderborn with +49 2902/912274, Warstein CHARGE: 0.060 DM/60s = 0.060
DM/Min (DTAG ISDN, Deutschland, Werktag (Montag), Abend)
Mar 31 21:19:45 debian isdnlog: Mar 31 21:19:45 tei 78 calling +49 ,
Paderborn with +49 , Warstein
HINT: Better use 01040:GTS, 0.039 DM/60s = 0.039 DM/Min, saving 0.025 DM/Min
Mar 31 21:19:45 debian isdnlog: Mar 31 21:19:45 tei 78 calling +49 ,
Paderborn with +49 , Warstein
1.CI 0.060 DM (now)
Mar 31 21:19:45 debian isdnlog: Mar 31 21:19:45 tei 78 calling +49 ,
Paderborn with +49 , Warstein
NEXT CI AFTER 01:00 (DTAG ISDN, Deutschland, Werktag (Montag), Abend)
Mar 31 21:20:29 debian kernel: kcapi: appl 4 ncci 0x10101 down
Mar 31 21:20:29 debian kernel: kcapi: appl 4 down
Mar 31 21:20:29 debian isdnlog: Mar 31 21:20:29 tei 78 calling +49 ,
Paderborn with +49 , Warstein
HINT: Cheapest booked 01040:GTS 0.039 DM (would save 0.021 DM)
Mar 31 21:20:29 debian isdnlog: Mar 31 21:20:29 tei 78 calling +49 ,
Paderborn with +49 , Warstein
HINT: Overall cheapest 01013:Tele 2 Preselection 0.030 DM (would save 0.030
DM)
Mar 31 21:20:29 debian isdnlog: Mar 31 21:20:29 tei 78 calling +49 ,
Paderborn with +49 , Warstein
HINT: LCR:FAILED
Mar 31 21:20:29 debian isdnlog: Mar 31 21:20:29 tei 78 calling +49 ,
Paderborn with +49 , Warstein
HANGUP (1 CI 0.060 DM 0:00:44)
und die Bildschirmausgabe von
debian:~ # c2faxsend -f TIFF -v -d 05251750356
/tmp/capi4hylafax/fritz_pic.tif
Try to send a fax to number 05251750356 in TIFF mode.
Dial and starting transfer of TIFF-File /tmp/capi4hylafax/fritz_pic.tif with
fine resolution.
Connection was dropped with Reason 0x3314 (Disconnected during transfer
(remote abort)).
before Fax was completely transfered.
Connection dropped with Reason 0x3490 (Normal call clearing).
SESSION END
debian:~ #
Hat jemand eine ungefähre Ahnung, woran das nu schon wieder liegen könnte?
Bevor ich die beiden Sachen (hylafax + capi4hylafax - ThePenguin - Edition)
installiert habe, ging´s genau einmal, seitdem nicht mehr.
System: SuSE 7.2, Kernel 2.4.20
Schönen Abend noch!
Stefan
--
+++ GMX - Mail, Messaging & more http://www.gmx.net +++
Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!
Hallo Frank,
Schön daß es jetzt funzt.
Zu 1) schau mal in "/etc/cron.daily/faxcron" nach.
Zu 2) Da ich ja mit dem SLOX als System arbeite, musste ich nix extra
machen.
Die Faxnachricht erhalte ich ein Mail mit einem ftp-Link. Siehe
mein
Mail von 28.03.
Wie das mit den PDF-Dokumenten zu gehen hat, ist mir auch nicht
ganz klar,
würde mich aber auch brennend interessieren.
Vielleicht steht in den FAQ oder manpages zu hylafax was drin?
Es gibt aber auch konstenlose Hylfax-Clients auf Windows-Basis:
Schau mal unter http://www.uli-eckhardt.de/whfc/ nach.
Vielleicht ist das noch besser als mit der Mailgeschichte.
Mit freundlichen Grüßen
Bernhard Pallas
Neue Schulstrasse 15
71665 Vaihingen / Enz
Telefon Mobil 0171 14 67 251
Zuhause 07042 840019
Telefax: 07042 840029
-----Ursprüngliche Nachricht-----
Von: Frank Schlotfeldt [mailto:linux@schlotfeldt.net]
Gesendet: Sonntag, 30. März 2003 17:51
An: Bernhard(a)abc-pallas.de
Betreff: Re: AW: AW: AW: [suse-isdn] Faxserver mit Suse 8.1 Pro und
FritzCard PCI v2
Hallo Bernhard!
Mit den neuen Paketen klappt es tadellos. Ich habe jetzt nur noch zwei
kleine Probleme.
Nr. 1:
Man soll ja zwei Skripte laufen lassen, die die Verzeichnisse von
Hylafax säubern und Statusinfos übermitteln. faxqclean habe ich
gefunden, aber faxcron existiert auf meinem Rechner nicht. Kann man das
irgendwoher bekommen?
Nun zu Nummer 2:
Ich möchte die ankommenden gerne als pdf/ps-Anhang per Mail an mich
verschicken. Ich habe gelesen, daß ich dazu irgendwelche Dateien
abändern muß, bin aber nicht ganz durchgestiegen welche und ob ich noch
postfic oder so etwas konfigurieren muß.
Vielleicht kannst Du mir ja dabei nochmal helfen..
Frank
Hallo Frank,
Z.B.:
ftp.leo.org/pub/suse/i386/update/8.1/rpm/i586/capi4linux-2002.11.5-0.i58
6.rpm
ftp.leo.org/pub/suse/i386/update/8.1/rpm/i586/capi4hylafax-4.1.3-91.i586
.rpm
Mit Outlook direkt anklicken oder mit
----snip here----
wget
ftp.leo.org/pub/suse/i386/update/8.1/rpm/i586/capi4linux-2002.11.5-0.i58
6.rpm
wget
ftp.leo.org/pub/suse/i386/update/8.1/rpm/i586/capi4hylafax-4.1.3-91.i586
.rpm
----snap there---
Markieren und direkt in einem putty-Terminal (rechte Maustaste)
ausführen. Ist echt oberkomfortabelbequem.
Mit freundlichen Grüßen
Bernhard Pallas
Neue Schulstrasse 15
71665 Vaihingen / Enz
Telefon Mobil 0171 14 67 251
Zuhause 07042 840019
Telefax: 07042 840029
-----Ursprüngliche Nachricht-----
Von: Frank Schlotfeldt [mailto:linux@schlotfeldt.net]
Gesendet: Freitag, 28. März 2003 20:45
An: Bernhard(a)abc-pallas.de
Betreff: Re: AW: AW: [suse-isdn] Faxserver mit Suse 8.1 Pro und
FritzCard PCI v2
Am Freitag, 28. März 2003 17:28 schrieb Bernhard(a)abc-pallas.de:
> Hallo Frank,
>
> Zunächst ist es erforderlich, daß Du Dir die neuesten Patches von
> capi4hylafax und capi4linux Runterlädtst. Ich habe die von Dir
> beschriebenen Phänomene auch gehabt. Ich habe jetzt:
> --capi4linux-2002.11.11-0
> --capi4hylafax-4.1.3-91
> Damit habe ich das System einwandfrei am laufen.
> Ohne weitere Installation schickt mir das System dann folgende Mail,
> die ich, da das System per se ein Mailserver ist (SLOX) bequem im
> Outlook erhalte:
>
Hallo Bernhard,
wo hast Du denn die neuen Pakete her?
Frank
Hallo Frank,
Zunächst ist es erforderlich, daß Du Dir die neuesten Patches von
capi4hylafax und capi4linux
Runterlädtst. Ich habe die von Dir beschriebenen Phänomene auch gehabt.
Ich habe jetzt:
--capi4linux-2002.11.11-0
--capi4hylafax-4.1.3-91
Damit habe ich das System einwandfrei am laufen.
Ohne weitere Installation schickt mir das System dann folgende Mail, die
ich, da das System per se ein Mailserver ist (SLOX) bequem im Outlook
erhalte:
Von: The HylaFAX Receive Agent [fax(a)abcd-pallas.de]
Gesendet: Donnerstag, 27. März 2003 10:18
An: FaxMaster(a)abcd-pallas.de
Betreff: Facsimile received from 022619142337
recvq/fax00244.tif (ftp://linux:4559/recvq/fax00244.tif):
Sender: xxxxxxxxxxxxxxx
Pages: 1
Quality: Normal
Page: ISO A4
Received: 2003:03:27 10:17:36
TimeToRecv: 0:51
SignalRate: 9600 bit/s
DataFormat: 1-D MR
ReceivedOn: faxCAPI
CommID: c00000073 (ftp://linux:4559/log/c00000073)
CIDNumber: xxxxxxxxxxxxxxxx
Hoffe, daß die das hilft!
Bernhard Pallas
Neue Schulstrasse 15
71665 Vaihingen / Enz
Telefon Mobil 0171 14 67 251
Zuhause 07042 840019
Telefax: 07042 840029
-----Ursprüngliche Nachricht-----
Von: Frank Schlotfeldt [mailto:linux@schlotfeldt.net]
Gesendet: Freitag, 28. März 2003 11:46
An: Bernhard(a)abc-pallas.de
Betreff: Re: AW: [suse-isdn] Faxserver mit Suse 8.1 Pro und FritzCard
PCI v2
Am Donnerstag, 27. März 2003 19:26 schrieb Bernhard(a)abc-pallas.de:
> Hallo Frank,
>
>Prinzipiell funktioniert die PCPCI genauson wie die AVM-B1.
>
> Wenn Du willst, dann kann ich dir gerne weiterhelfen.
>
> Grüße
>
> Bernhard Pallas
Hallo Bernhard,
die Hilfe würde ich gern in Anspruch nehmen.
Zuerst zu meinem System:
Suse 8.1 Pro, Hylafax 4.1.3-32, capi4linux 2002.9.8-4 (orig. Suse CD)
capi4hylafax 01.02.02 (von AVM)
Ich habe Hylafax und die capi4linux von der CD installiert und danach
faxsetup ausgeführt. Dann die capi4hylafax installiert und rebootet.
Faxversand fkt. mit c2faxsend, Faxempfang fkt. auch schon.
Wie kriege ich denn jetzt Hylafax zum Laufen. Momentan läuft ja alles
noch über die Capi. Möchte später drei Clients (2x Win, 1x Suse) dazu
kriegen, daß diese Faxe über den Server versenden können. Eventuell
sollen die eingehenden Faxe per Mailanhang an mich verschickt werden.
Ach ja, Samba ist auch installiert.
Als ich bei der letzten Installation den hfaxd gestartet hatte, nahm der
Rechner keine Faxe mehr an, konnte aber noch senden.
BrauchstDu noch irgendwelche config-Dateien?
Danke schonmal,
Frank
Hallo Wolfgang
Du hast richtig gelesen:=20
2 x DSL, also ppp0, ppp1, ppp2 usw.
Dahinter liegt die Absicht, ein VPN (das =FCbrigens mit CIPE prima
funktioniert) noch weiter hinsichtlich
Lastverteilung zu perfektionieren, bzw. aufzubohren.=20
Mit freundlichen Gr=FC=DFen
Bernhard Pallas
-----Urspr=FCngliche Nachricht-----
Von: Wolfgang Hinsch [mailto:wolfgang.hinsch@moebiusbau.de]=20
Gesendet: Donnerstag, 27. M=E4rz 2003 09:23
An: SuSE Mailingliste ISDN
Betreff: Re: [suse-isdn] DSL MULTI KANAL
Am Mit, 2003-03-26 um 21.34 schrieb Bernhard Pallas:
>=20
> Hallo
>=20
> Wer kann mir helfen.
> Ich m=F6chte mit SuSE linux 8.1 zwei oder mehr DSL-Leitungen=20
>konfigurieren, aber mit Yast2 geht?s nicht.
> Hat jemand eine Idee ???
> DANKE !!!!!
>=20
>=20
>=20
Hallo,
zwei oder mehr _DSL_ ? Nicht ISDN?
Gruss, Wolfgang
--=20
Um die Liste abzubestellen, schicken Sie eine Mail an:
suse-isdn-unsubscribe(a)suse.com
Um eine Liste aller verf=FCgbaren Kommandos zu bekommen, schicken Sie =
eine Mail an: suse-isdn-help(a)suse.com
Bernhard Pallas
Neue Schulstrasse 15
71665 Vaihingen / Enz
Telefon Mobil 0171 14 67 251
Zuhause 07042 840019
Telefax: 07042 840029