Hallo ISDNler,
ich habe auf meinem Pentium III/1 GHz- System mit ELSA
Microlink PCI ISDN-Karte, das bislang unter SuSE 7.2
Professional, Kernel 2.4.10, lief, eine komplette
_Neuinstallation_ auf SuSE 8.0 durchgeführt und mich dabei an
die Vorgaben der automatischen Hardwareerkennung gehalten.
Unter dem neuen System bekomme ich aber keine ISDN-
Verbindung. Der Fehler äußert sich so:
Die automatische HW-Erkennung von YaST2 "diagnostizierte"
anstelle der Microlink PCI eine "Quickstep 1000", ebenfalls
von ELSA. Dann suchte ich manuell die richtige Karte heraus,
und führte den Treibertest durch, der auch positiv verlief.
Nach dem Speichern wurde dann allerdings wieder die
Quickstep 1000 angezeigt.
An und Pfirsich ist die Microlink ja verträglich, und unter
7.2 hatte ich auch keine Probleme.
Für den Internetzugang verwende ich, wie schon in der
Vorgängerversion, kinternet.
Beim Anklicken des Steckersymbols erfolgt keine sichtbare
Reaktion, und alle Ping-Versuche nach draußen
bleiben negativ. "Protokoll ansehen" meldet aber eine
positive Verbindungsaufnahme.
Die Kontextmenüpunkte "Einwahl", "Auflegen", "Start" sind
nicht aktivierbar.
Hat schon mal jemand etwas ähnliches erlebt oder sonst eine
Idee, woran das liegen könnte?
Danke, Daniel
===============================
Anhänge
==============================
--------------------------------------------
Protokoll von kinternet
-------------------------------------------
SuSE Meta pppd (smpppd), Version 0.73 on linux.
wwwoffle not is running
Selection of interface/provider "ippp0"/"Innenstadt"
succeeded.
Starting connection. (2002-08-06 20:42:18 CEST)
--------------------------------------------
/tmp/siga.txt
-------------------------------------------
(...snip)
1.7 hwinfo-isdn
18: PCI 0b.0: 10300 ISDN Adapter
[Created at pci.65]
Unique ID: gZD2.O258dgix3E3
Hardware Class: isdn adapter
Model: "Elsa QuickStep 1000"
Vendor: 1048 "Elsa AG"
Device: 1000 "QuickStep 1000"
SubVendor: 1048 "Elsa AG"
SubDevice: 1000 "?"
Revision: 0x02
Memory Range: 0xda001000-??? (rw,non-prefetchable)
I/O Ports: 0xd000-??? (rw)
I/O Ports: 0xd400-??? (rw)
IRQ: 5 (3 events)
Driver Info #0:
I4L Type: 18/12 [Elsa Microlink PCI]
-----------------
2.1 /var/log/messages
(...snip)
Aug 6 20:03:49 linux kernel: eth0: Davicom DM9102/DM9102A
rev 49 at 0xcc00, 00:80:AD:70:B9:56, IRQ 10.
Aug 6 20:03:52 linux smpppd[4695]: smpppd version 0.73
started
Aug 6 20:03:57 linux /etc/hotplug/net.agent[4221]: No HW
description found ... exiting
Aug 6 20:04:03 linux init: Entering runlevel: 5
Aug 6 20:04:04 linux kernel: isapnp: Scanning for PnP
cards...
Aug 6 20:04:04 linux kernel: isapnp: No Plug & Play device
found
Aug 6 20:04:04 linux kernel: CSLIP: code copyright 1989
Regents of the University of California
Aug 6 20:04:04 linux kernel: ISDN subsystem Rev:
1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
Aug 6 20:04:04 linux kernel: HiSax: Linux Driver for passive
ISDN cards
Aug 6 20:04:04 linux kernel: HiSax: Version 3.5 (module)
Aug 6 20:04:04 linux kernel: HiSax: Layer1 Revision 1.1.4.1
Aug 6 20:04:04 linux kernel: HiSax: Layer2 Revision 1.1.4.1
Aug 6 20:04:04 linux kernel: HiSax: TeiMgr Revision 1.1.4.1
Aug 6 20:04:04 linux kernel: HiSax: Layer3 Revision 1.1.4.1
Aug 6 20:04:04 linux kernel: HiSax: LinkLayer Revision
1.1.4.1
Aug 6 20:04:04 linux kernel: HiSax: Approval certification
valid
Aug 6 20:04:04 linux kernel: HiSax: Approved with ELSA
Microlink PCI cards
Aug 6 20:04:04 linux kernel: HiSax: Approved with Eicon
Technology Diva 2.01 PCI cards
Aug 6 20:04:04 linux kernel: HiSax: Approved with Sedlbauer
Speedfax + cards
Aug 6 20:04:04 linux kernel: HiSax: Approved with HFC-S PCI
A based cards
Aug 6 20:04:04 linux kernel: HiSax: Total 1 card defined
Aug 6 20:04:04 linux kernel: HiSax: Card 1 Protocol EDSS1
Id=contr0 (0)
Aug 6 20:04:04 linux kernel: HiSax: Elsa driver Rev. 1.1.4.1
Aug 6 20:04:04 linux kernel: Elsa: Microlink PCI defined at
0xd800/0xd400 IRQ 5
Aug 6 20:04:04 linux kernel: Elsa: IPAC version 2
Aug 6 20:04:04 linux kernel: Elsa PCI: IRQ 5 count 3
Aug 6 20:04:04 linux kernel: Elsa PCI: IRQ 5 count 6
Aug 6 20:04:04 linux kernel: HiSax: DSS1 Rev. 1.1.4.1
Aug 6 20:04:04 linux kernel: HiSax: 2 channels added
Aug 6 20:04:04 linux kernel: HiSax: MAX_WAITING_CALLS added
Aug 6 20:04:04 linux kernel: HiSax: debugging flags card 1
set to 4
Aug 6 20:04:04 linux kernel: HiSax: debugging flags card 1
set to 4
Aug 6 20:04:04 linux isdnlog: isdnlog Version 4.56 starting
Aug 6 20:04:04 linux isdnlog: Holiday Version 1.10-Germany
[12-Apr-1999] loaded [11 entries from /usr/lib/isdn/holiday-
de.dat]
Aug 6 20:04:04 linux isdnlog: Dest V1.01:
File '/usr/lib/isdn/dest.cdb' opened fine - Dest 1.0 int (+h)
AT DE NL CH
Aug 6 20:04:05 linux isdnlog: Zone V1.25: Provider 0
File '/usr/lib/isdn/zone-de-dtag.cdb' opened fine - V1.25 K2
C2 N256 T157147 O1 L5
Aug 6 20:04:05 linux isdnlog: Rates Version 2.01rc2 [26-
Jan-2002 20:46:13] loaded [43 Providers, 277 Zones, 1368
Areas, 42 Services, 266 Comments, 0 eXceptions, 4 Redirects,
912 Rates from /usr/lib/isdn/rate-de.dat]
Aug 6 20:04:05 linux isdnlog: (ISDN subsystem with
ISDN_MAX_CHANNELS > 16 detected, ioctl(IIOCNETGPN) is
available)
Aug 6 20:04:05 linux isdnlog: isdn.conf:2 active channels, 2
MSN/SI entries
Aug 6 20:04:05 linux isdnlog: (Data versions: iprofd=0x06
net_cfg=0x06 /dev/isdninfo=0x01)
Aug 6 20:04:05 linux isdnlog: Everything is fine, isdnlog-
4.56 is running in full featured mode.
Aug 6 20:04:05 linux kernel: Kernel logging (proc) stopped.
Aug 6 20:04:05 linux kernel: Kernel log daemon terminating.
Aug 6 20:04:06 linux exiting on signal 15
Aug 6 20:04:06 linux syslogd 1.4.1: restart.
Aug 6 20:04:11 linux kernel: klogd 1.4.1, log source
= /proc/kmsg started.
Aug 6 20:04:11 linux kernel: Inspecting /boot/System.map-
2.4.18-64GB-SMP
Aug 6 20:04:11 linux kernel: Loaded 13537 symbols
from /boot/System.map-2.4.18-64GB-SMP.
Aug 6 20:04:11 linux kernel: Symbols match kernel version
2.4.18.
Aug 6 20:04:11 linux kernel: Loaded 699 symbols from 29
modules.
Aug 6 20:04:12 linux kernel: IPv6 v0.8 for NET4.0
Aug 6 20:04:12 linux kernel: IPv6 over IPv4 tunneling driver
Aug 6 20:04:12 linux sshd[5200]: Server listening on :: port
22.
Aug 6 20:04:12 linux kernel: lp0: using parport0 (polling).
Aug 6 20:04:12 linux kernel: lp0: compatibility mode
Aug 6 20:04:13 linux /usr/sbin/cron[5320]: (CRON) STARTUP
(fork ok)
Aug 6 20:04:14 linux modprobe: modprobe: Can't locate module
char-major-10-134
Aug 6 20:04:20 linux /etc/hotplug/net.agent[5213]: No HW
description found ... exiting
Aug 6 20:04:23 linux kernel: eth0: no IPv6 routers present
Aug 6 20:04:36 linux kdm[5470]: pam_unix2: session started
for user daniel, service xdm
Aug 6 20:04:40 linux kernel: hdg: status error: status=0x58
{ DriveReady SeekComplete DataRequest }
Aug 6 20:04:40 linux kernel: hdg: drive not ready for command
Aug 6 20:04:45 linux kernel: hdg: status error: status=0x58
{ DriveReady SeekComplete DataRequest }
Aug 6 20:04:45 linux kernel: hdg: drive not ready for command
Aug 6 20:04:51 linux kernel: hdg: status error: status=0x58
{ DriveReady SeekComplete DataRequest }
Aug 6 20:04:51 linux kernel: hdg: drive not ready for command
Aug 6 20:04:51 linux kernel: hdg: status error: status=0x58
{ DriveReady SeekComplete DataRequest }
Aug 6 20:04:51 linux kernel: hdg: drive not ready for command
Aug 6 20:05:11 linux kernel: hdg: status error: status=0xd0
{ Busy }
Aug 6 20:05:11 linux kernel: hdg: drive not ready for command
Aug 6 20:05:12 linux kernel: ide3: reset: success
Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported
command in request queue (0)
Aug 6 20:06:02 linux kernel: end_request: I/O error, dev
03:00 (hda), sector 0
Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported
command in request queue (0)
Aug 6 20:06:02 linux kernel: end_request: I/O error, dev
03:00 (hda), sector 2
Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported
command in request queue (0)
Aug 6 20:06:02 linux kernel: end_request: I/O error, dev
03:00 (hda), sector 4
Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported
command in request queue (0)
Aug 6 20:06:02 linux kernel: end_request: I/O error, dev
03:00 (hda), sector 6
Aug 6 20:06:02 linux kernel: VFS: Disk change detected on
device ide0(3,0)
Aug 6 20:06:02 linux kernel: ide-scsi: hda: unsupported
command in request queue (0)
Aug 6 20:06:02 linux kernel: end_request: I/O error, dev
03:00 (hda), sector 0
Aug 6 20:06:02 linux kernel: FAT: unable to read boot sector
Aug 6 20:07:01 linux modprobe: modprobe: Can't locate module
char-major-10-134
Aug 6 20:07:01 linux kdm[5470]: pam_unix2: session finished
for user daniel, service xdm
Aug 6 20:07:05 linux init: Switching to runlevel: 0
Aug 6 20:07:07 linux smpppd[4696]: terminating on signal 15
Aug 6 20:07:07 linux sshd[5200]: Received signal 15;
terminating.
Aug 6 20:07:07 linux kernel: Kernel logging (proc) stopped.
Aug 6 20:07:07 linux kernel: Kernel log daemon terminating.
Aug 6 20:07:08 linux exiting on signal 15
Aug 6 20:09:36 linux syslogd 1.4.1: restart.
Aug 6 20:09:37 linux insmod: insmod: a module named sg
already exists
Aug 6 20:09:37 linux insmod: insmod: insmod char-major-21
failed
Aug 6 20:09:37 linux insmod: insmod: a module named sg
already exists
Aug 6 20:09:37 linux insmod: insmod: insmod char-major-21
failed
Aug 6 20:09:37 linux insmod: insmod: a module named st
already exists
Aug 6 20:09:37 linux insmod: insmod: insmod char-major-9
failed
Aug 6 20:09:41 linux kernel: klogd 1.4.1, log source
= /proc/kmsg started.
Aug 6 20:09:41 linux kernel: Inspecting /boot/System.map-
2.4.18-64GB-SMP
Aug 6 20:09:41 linux kernel: Loaded 13537 symbols
from /boot/System.map-2.4.18-64GB-SMP.
Aug 6 20:09:41 linux kernel: Symbols match kernel version
2.4.18.
Aug 6 20:09:41 linux kernel: Loaded 335 symbols from 15
modules.
Aug 6 20:09:41 linux kernel: isapnp: Scanning for PnP
cards...
Aug 6 20:09:41 linux kernel: isapnp: No Plug & Play device
found
Aug 6 20:09:41 linux kernel: CSLIP: code copyright 1989
Regents of the University of California
Aug 6 20:09:41 linux kernel: ISDN subsystem Rev:
1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
Aug 6 20:09:41 linux kernel: HiSax: Linux Driver for passive
ISDN cards
Aug 6 20:09:41 linux kernel: HiSax: Version 3.5 (module)
Aug 6 20:09:41 linux kernel: HiSax: Layer1 Revision 1.1.4.1
Aug 6 20:09:41 linux kernel: HiSax: Layer2 Revision 1.1.4.1
Aug 6 20:09:41 linux kernel: HiSax: TeiMgr Revision 1.1.4.1
Aug 6 20:09:41 linux kernel: HiSax: Layer3 Revision 1.1.4.1
Aug 6 20:09:41 linux kernel: HiSax: LinkLayer Revision
1.1.4.1
Aug 6 20:09:41 linux kernel: HiSax: Approval certification
valid
Aug 6 20:09:41 linux kernel: HiSax: Approved with ELSA
Microlink PCI cards
Aug 6 20:09:41 linux kernel: HiSax: Approved with Eicon
Technology Diva 2.01 PCI cards
Aug 6 20:09:41 linux kernel: HiSax: Approved with Sedlbauer
Speedfax + cards
Aug 6 20:09:41 linux kernel: HiSax: Approved with HFC-S PCI
A based cards
Aug 6 20:09:41 linux kernel: HiSax: Total 1 card defined
Aug 6 20:09:41 linux kernel: HiSax: Card 1 Protocol EDSS1
Id=contr0 (0)
Aug 6 20:09:41 linux kernel: HiSax: Elsa driver Rev. 1.1.4.1
Aug 6 20:09:41 linux kernel: Elsa: Microlink PCI defined at
0xd400/0xd000 IRQ 5
Aug 6 20:09:41 linux kernel: Elsa: IPAC version 2
Aug 6 20:09:41 linux kernel: Elsa PCI: IRQ 5 count 0
Aug 6 20:09:41 linux kernel: Elsa PCI: IRQ 5 count 3
Aug 6 20:09:41 linux kernel: HiSax: DSS1 Rev. 1.1.4.1
Aug 6 20:09:41 linux kernel: HiSax: 2 channels added
(...snip)
3.1 /etc/ppp/ioptions
# /etc/ppp/ioptions
# for isdn4linux/syncPPP global options for ipppd
#
#
# Klaus Franken
# Version: 15.05.97 (5.0)
#
#
lock
# Set 'debug' to create a lot of information
in /var/log/messages
#debug
# Set '+pwlog' for logging passwords in /var/log/messages
#+pwlog
debug
--------------------------------------------------------------
-----------------
3.2 isdn_cfg
/etc/sysconfig/isdn/cfg-contr0
AREACODE="02204"
DEBUG="4"
DIALPREFIX=""
DRIVER="hisax"
NAME="Elsa Microlink PCI"
PARA_IO=""
PARA_IRQ=""
PARA_MEMBASE=""
PARA_SUBTYPE="12"
PARA_TYPE="18"
PROTOCOL="euro"
STARTMODE="onboot"
UNIQUE=""
--------------------------------------------------------------
-----------------
3.3 isdn net config
/etc/sysconfig/isdn/cfg-net0
CALLBACK="off"
CHARGEHUP="on"
COMPRESSION="no"
DEFAULTROUTE="yes"
DIALMODE="manual"
DYNAMICIP="yes"
FIREWALL="no"
IDLETIME="300"
IPADDR="0.0.0.0"
MSN="0"
MULTILINK="no"
PROTOCOL="syncppp"
PROVIDER="NetCologne"
PTPADDR="0.0.0.0"
STARTMODE="onboot"
USEPEERDNS="yes"
--------------------------------------------------------------
-----------------
3.7 smpppd.conf
# see "man smpppd" and "man smpppd.conf" for more information
# note: values in /var/lib/smpppd/smpppd.var.conf have higher
priority
wwwoffle-use = no
wwwoffle-fetch = no
stop-on-disconnect = notdemand
open-inet-socket = no
number-of-loglines = 250
--------------------------------------------------------------
-----------------
3.8 isdnctrl
no ISDN info found
--------------------------------------------------------------
-----------------
11. network
--------------------------------------------------------------
/etc/sysconfig/network/ifcfg-ippp0
#
# DO NOT EDIT THIS FILE !!!
# autogenerated by SuSEconfig.isdn
from /etc/sysconfig/isdn/cfg-net0
# edit /etc/sysconfig/isdn/cfg-net0 instead and run
# SuSEconfig --module isdn
#
STARTMODE="onboot"
IPADDR="0.0.0.0"
PTPADDR="0.0.0.0"
DEFAULTROUTE="yes"
FIREWALL="no"
MSN="0"
DIALMODE="manual"
DIALPREFIX=""
REMOTE_OUT=""
REMOTE_IN=""
PROVIDER="NetCologne"
CHARGEHUP="on"
IDLETIME="300"
SLAVES=""
MULTILINK="no"
DEVICE="ippp0"
LAYER2="hdlc"
LAYER3="trans"
ENCAP="syncppp"
IP_RESEND=""
IP_RESEND_PARAMETER=""
DYNAMICIP="yes"
USEPEERDNS="yes"
IPPPD_OPTIONS=""
ASKPASSWORD=""
