August 2007 - openSUSE Users - openSUSE Mailing Lists

[opensuse] wireless card driver for Acer Aspire 9300
by James D. Parra 26 Aug '07

26 Aug '07

Hello, I am looking for the opensuse 10.2 web page that lists drivers for specific hardware (laptops); can someone point me to that? Can't seem to detect the wireless card for the Acer Aspire 9300. Many thanks, James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] yast lock file
by jdd 26 Aug '07

26 Aug '07

I had to break a yast update (too long, I had to leave) (Ctrl Alt <-) now I can use yast/software because the rpm data base is locked. I removed all the /var/lock fomder with no result. where do yast lock file stay? thanks jdd -- http://www.dodin.net http://gourmandises.orangeblog.fr/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] Why does my sig file not work?
by Constant Brouerius van Nidek 26 Aug '07

26 Aug '07

I have a sigfile which I wanted to put in service after some time of non use. I entered the respective command in the Kmail config and was surprised that I got a different output as expected. The sigfile is executable and as far as I remember, worked before. Somebody with a hint? Following is the output on my email: -- #!/bin/bash powered=`cat /etc/SuSE-release | head -n 1` kernel=`uname -r` kde=`kde-config -v | grep KDE` up=`uptime` echo "+=========================================+" echo "| Powered by $powered Kernel: $kernel |" echo " "$kde" " echo "|$up |" echo "+=========================================+" -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] SuSE 10.2 and bluetooth
by Clive Rogers 26 Aug '07

26 Aug '07

Hello All, Has anybody successfully got bluetooth with a Broadcom 3022 headset to work in SuSE 10.2 ? I have installed all the bluez and inserted the bluetooth USB dongle. SuSE recognised it and asked for the pin when I switched the headset into pairing mode. I can see that the headset is paired but I can not figure out how to get music or Skype to work with the headset. I have downloaded, installed configured the latest version of Skype and can use it with a desk top microphone and speakers but there does not seem to be the option in Skype to switch over to the bluetooth device. I have also checked in Yast the sound device and there is only one which is my sound card. If I remember correctly when the bluetooth device is inserted and the headset paired I should see a second sound device but this is not the case. Can you help ? -- Kindest regards, Clive. http://homepage.ntlworld.com/c.rogers/ Fighting for darker skies. From 52:26:31N 01:27:48W -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] git-submodule
by Michel Salim 26 Aug '07

26 Aug '07

Hello, If any devel:tools:scm people are reading this, could we get an updated git package in the repositories? The current version does not support git-submodule, which is a really neat feature. Thanks, -- Michel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] VMWare-users list?
by Hylton Conacher (ZR1HPC) 26 Aug '07

26 Aug '07

Peter Van Lone wrote: > On 8/25/07, Hylton Conacher (ZR1HPC) <hylton(a)conacher.co.za> wrote: > >> mmmm, so I see from the reply I rec'd from the webmaster. He did >> identify how I could integrate it with email, so I am going to give that >> a try and see if the result is something I can work with. > > how is that? I am like you in that I want one screen to work with. The > vmware forums are very active and useful, but if I could get them in > email ...wow, that would be nice! I've copied the mail the webmaster sent me and pasted below: Hi, Hylton. Thanks for your interest in our products. I believe that the VMTN forums have the ability to meet your needs. All forum posts are indeed archived. For example, take a look at the VMware Server forum: http://www.vmware.com/community/forum.jspa?forumID=219 There's a "search forum" box at the top of the right column; if your first search is unsatisfactory, there's an "Advanced Search" form included with your results. Note the time range; the default is posts within the last week. Change this dropdown if you'd like to search back to the beginning of the forum. On each forum topic, there's a link at the top entitled "Watch this topic." Clicking here (assuming you are using the forums as a logged-in user) will cause all new posts to be emailed to you. When you are a logged-in user, clicking on the link for "Your Control Panel" gives you access to two relevant choices: "Always watch topics I create" and "Always watch topics I reply to". Note also the link on this page for "My Watches", which allows you to control your currently active watches. Finally, if you have an RSS tool, note that each forum is available as an RSS feed. I personally am just a user of the forums; I have no direct responsibility for them. If you have comments or feedback on the forums, the best way to reach the people who manage it would be via the Web and Community Suggestions forum: http://www.vmware.com/community/forum.jspa?forumID=36 Best wishes-- -- Brian Rice brice(a)vmware.com Education Services Product Manager VMware, Inc. Hope it helps Hylton > > Peter -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] opensuse-10,3beta2 on on64bit: IDE disk gets recognised as /dev/sda
by Günter Lichtenberg 26 Aug '07

26 Aug '07

Hi all - I just tried to install 10.3beta2 (the KDE CD iso) on my 64bit machine. The first steps worked until the installation set-up. But when I check the suggested partitioning it recognises my IDE disk as an /dev/sda and the menu in the partitioner also says it is a scsi disk. Checking on the suggested GRUB entries, the 10.2 root is also set to /dev/sda. At that point I stopped, because I did not want to shoot down my working 10.2 installation. I remember dimly that there was something about devices not correctly identified at some point in bugzilla, but I could not find it back... The question is: Is this a real bug or a feature? I always thought that IDE disks should be on hda devices. Technical info: The disk a WD on a Fujitsu-Siemens AMD64bit d1607 (VIA motherboard) connected via IDE. Cheers gl P.S.: If it is a (new) bug I will of course file it... -- G�nter Lichtenberg ========>mailto:lichten@arcor.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

7 21

Re: [opensuse] Adding SATA port multiplier support in Opensuse 10.2
by Mike Myers 26 Aug '07

26 Aug '07

By saying the vanilla kernel route, I meant downloading 2.6.18.8 from kernel.org and doing the patches against it, and then running that kernel. I just downloaded it and the patches worked fine against that base. The problem is that I am not sure what I lose by loading that kernel over the patched version that opensuse distributes. Especially since I like to use EVMS, and I know that seems to work out of the box with the patched opensuse kernel. Device mapper support is in 2.6.18.8, but again I am not sure what else went into the opensuse version. Is there a list of all patches that opensuse applied to the generic 2.6.18.8 kernel? Also, I contacted Tejun, and his existing patches are on a path to be incorporated into 2.6.23, but he is about to release PMP support for AHCI SATA controllers, which should be very popular too. I'll try and track down the forward port of the patchset, but I may try just running with the patched vanilla 2.6.18.8 first. I haven't used bugzilla before, but I'll work on getting a request added. PMP support is just SO useful, and windows drivers now pretty much support it across the board on a bunch of different controllers. Linux really needs it since software raid works so well. Thanks, Mike ----- Original Message ---- From: Greg Freemyer <greg.freemyer(a)gmail.com> Cc: opensuse(a)opensuse.org Sent: Monday, June 25, 2007 10:09:56 AM Subject: Re: [opensuse] Adding SATA port multiplier support in Opensuse 10.2 On 6/25/07, Mike Myers <mikesm559(a)yahoo.com> wrote: > Hi. I am having difficulty in applying the patches at http://home-tj.org/wiki/index.php/Libata-tj-stable to the 2.6.18.8-0.3 kernel. Some of the patchs seem to be applied, but others not. I need this to make SATA port multiplier work. > > > > Before I just go the vanilla kernel route, has anyone managed to get these patches incorporated in the patched opensuse kernel? > > > > Thanks, > > mike Mike, Even the vanilla kernel route may not help you much. The PMP patches never made it into vanilla (yet). If you search the lkml-ide mailing list I think you will find some people that have forward ported the PMP patchset, but you are definitely heading into unsupported territory. FYI: I think Tejun Heo is a Novell employee, so you may have better luck asking for the patchset to be incorporated into the 10.3 kernel. If you submit a bugzilla, etc. let me know and I'll add my vote. Greg -- Greg Freemyer The Norcross Group Forensics for the 21st Century -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org ____________________________________________________________________________________Ready for the edge of your seat? Check out tonight's top picks on Yahoo! TV. http://tv.yahoo.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] windows XP boot manger 2 boot opensuse
by Alberto Santana 26 Aug '07

26 Aug '07

I have a desktop with 2 drives (sda and sdb). sda contains windows XP. Opensuse 10.2 (default installation) is on sdb. During the installation I had to put grub on the root partition of sdb. The machines are under a lease and we are NOT allow to modify the MBR. So the question is, how can I boot my linux from the windows xp boot manager? Followed the instructions given here: http://en.opensuse.org/SDB:Booting_Linux_with_the_Windows_NT/2000/XP_Boot_M… but no luck. After selecting linux from the WinXP boot manager I end up with a text console shown the word GRUB. -- Best wishes, Alberto -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] Installing ntfs-3g under SuSE 10.2
by Dennis J. Tuchler 26 Aug '07

26 Aug '07

I have SuSE 10.2 installed together with Windows on a laptop which I purchased a couple of years ago. The Windows partition is mounted as NTFS file system, and is called WindowsC. I have googled neft-3g but only found references to insftalling it under various versions of SuSE OTHER THAN SUSE. My questions: 1 How do I install ntfs-3g onto Linux so that I can write to the NTFS partition? 2 Will ntfs-3g come with and be installed with 10.3? -- Best regards, Dennis J. Tuchler University City, Missouri 63130 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Postfix to stop all email from internet/public IP's to user begining with bk
by Boyd Lynn Gerber 26 Aug '07

26 Aug '07

Hello and thanks in advance. I want all email from public IP's/internet to bk...(a)example.com to be rejected. The rules for restricting private IP's are working great thanks to Sandy Drobic here and Mouss from the postfix mail list. Now I need to stop all emails to users that begin with bk from the internet but allow all other's. For example of two users... bk2000(a)example.com bk1921680001(a)example.com Here is how the system is setup. ----------------- | | --- Internet-- | Gateway Box | Internet public IP | | |-----------------------| | example.com | nic 1 example.com | | email users(a)example.com | | | | Some users have bk1921680001(a)example.com | | which is the same as the machine ---------------- ip1921680001.local.example.com | bk1921680001(a)local.example.com | bk...(a)example.com not all users are machine | related but start with bk | bk..(a)192.168.0.1 | | nic's 2,3 | one 192.168.x.x | local.example.com | Many Systems using the entire 192.168.x.x space Email from any 192.168.x.x for bk...(a)example.com stays on the server for them to read/pickup varies(working). What I want/need is any email from the internet/Public IP to bk...(a)example.com to be rejected and keep working any email from local.example.com or 192.168.x.x for bk...(a)example.com. As it is now. So for DNS I have 64770 entries in local.example.com as follows: --------------------------local.example.com------------------------- $TTL 3600 @ IN SOA example.example.com. root.example.example.com.( 2007080401 ; Serial 3600 ; Refresh 1800 ; Retry 2419200 ; Expire 86400 ) ; Minimum IN NS example.example.com. ip1921680001 IN A 192.168.0.1 ip1921680002 IN A 192.168.0.2 ... ip192168255253 IN A 192.168.255.253 ip192168255254 IN A 192.168.255.254 --------------------------local.example.com------------------------- and rDNS ---------------------168.192.in-addr.arpa--------------------------- $TTL 3600 @ IN SOA example.example.com. root.example.example.com. ( 2007081201 ; Serial 3600 ; Refresh 1800 ; Retry 2419200 ; Expire 86400 ) ; Minimum IN NS example.example.com $GENERATE 1-254 0.$ IN PTR ip192168000$.local.hbboys.com. ... $GENERATE 1-254 255.$ IN PTR ip192168255$.local.example.com. ---------------------168.192.in-addr.arpa--------------------------- so postconf -n will give for ... masquerade_domains = example.com mydestination = example.com,$myhostname,localhost.$mydomain,mail.example.com myhostname = example.example.com Thanks, -- Boyd Gerber <gerberb(a)zenez.com> ZENEZ 1042 East Fort Union #135, Midvale Utah 84047 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 3

[opensuse] Linux Kernel VESA Video Modes for 1440x900
by David C. Rankin 25 Aug '07

25 Aug '07

CORRECTED MESSAGE - JAN, I AGREE THIS DIDN'T NEED TO GO TO SAMBA Jan, List: Is there any way we can compile a kernel to include the VESA Video Modes for 1440x900 resolution so that we can pass grub VGA=867 for 1440x900. This will all me to work in runlevel 3 without the screen resolution being stretched from 1024x768 to 1440x900. The stretch causes everything to be distorted. The necessary VESA modes and numbers are: 1440x900 (dec; hex) ---------- 16 color --; -- 256 color (864; 0x360) 15 bit (865; 0x361) 16 bit (866; 0x362) 24 bit (867; 0x363) 32 bit (868; 0x364) There is also the new widescreen resolution of 1600x1050, but I do not have the vesa modes for that resolution. I would like to learn how to do this, or if this is something that has to be done by the kernel folks, I would ask that they consider including this capability in the future kernels. The sources for the information contained in this document were: o /usr/src/linux-2.6.22.3-ccj53/Documentation/i386/boot.txt o /usr/src/linux-2.6.22.3-ccj53/Documentation/kernel-parameters.txt o http://en.wikipedia.org/wiki/VESA_BIOS_Extensions -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 (936) 715-9333 (936) 715-9339 fax www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] XEN Question
by Andrei Verovski (aka MacGuru) 25 Aug '07

25 Aug '07

Hi ! Is it possible to run under OpenSuSE 10.2/XEN other distro? I have Fedora Core CD with SIPfoundry pre-installed and pre-configured, and I like to run it under SuSE/XEN unmodified. Thanks in advance for any suggestion(s). -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] MD5 ?
by Erik Jakobsen 25 Aug '07

25 Aug '07

Hi. What is the MD5 for the opensuse 10.3 beta2 DVD ? -- Med venlig hilsen / Best regards Erik Jakobsen erik_ja(a)mail.tele.dk openSuSE 10.2 (i586) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] Scan problem in 10.2
by A. den Oudsten 25 Aug '07

25 Aug '07

After installing 10.2 I have once been able to scan with Kooka. Since then I have to start Kooka twice to get it on screen, but is it loaded twice. I get the message: No scanner found, no sane installed. Yet the scanner is configured and sane installed. How to take this obstacle? Thanks, André den Oudsten -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 6

[opensuse] xfx video card
by Chris Arnold 25 Aug '07

25 Aug '07

I have been looking to replace my built-in intel i845 video and improve performance with "desktop effects" enabled (using gnome). I have a couple of questions about this video card and SLED10 SP1. I have found this card: XFX GeForce 6200 / 256MB DDR2 / AGP 8x for a killer price. Does SLED10 SP1 have support/drivers for this card? Second, this card is 8x AGP; if my AGP slot on my mainboard is not 8x, will it still work? Thanks Chris -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] Network Manager
by Johannes Nohl 25 Aug '07

25 Aug '07

Is Networkmanager (this thing instead of ifup) suse specific? knetworkmanager is just a frontend, right? The problem is that (at least using knetworkmanager) you can't choose between infratructure only and adhoc connections. The point is the hotspot I'm using (it's inside a library with many students) is hiding its SSID. And windows make it to easy to start an adhoc network. So there are a lot of computers saying that they would be the hotspot but they are just a adhoc network. Networkmanager always tries to connect to the adhocs which fails of course. What to do to enforce connecting to the infrastructure?? Will there be a interface for gnome and/or XFCE? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

12 24

[opensuse] VMWare-users list?
by Hylton Conacher (ZR1HPC) 25 Aug '07

25 Aug '07

Hi, I am using VMWare Server on 10.2 and am very happy with it. To improve my knowledge and ask the od question I wanted to join an active users group ie like this one for opensuse. I checked the VMWare site and found nothing, did a Google search which gave me several hits and one list at Princeton, however this list is a joke as I posted a query there on the 10th of Aug and have yet to see any other activity on the list. https://lists.cs.princeton.edu/mailman/listinfo/vmware Does anyone know of an active list or should I just add more, possibly unrealted, mail to this list? TIA Hylton -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 8

[opensuse] Post Restrict local.domain.com to local.domain.com ::ffff:ip (OpenSUSE 10.2)
by Boyd Lynn Gerber 25 Aug '07

25 Aug '07

Hello, I have a complete forward and reverse DNS setup for local.domain.com and I am trying to restrict all 192.168.x.x addresses. I am using in main.cf smtpd_restriction_classes = local_only local_only = check_recipient_access hash:/etc/postfix/local_only, reject smtpd_sender_restrictions = hash:/etc/postfix/access smtpd_client_restrictions = smtpd_recipient_restrictions = check_sender_access hash:/etc/postfix/restricted_senders, permit_sasl_authenticated,permit_mynetworks,check_relay_domains and local_only has all 64770 entries below. 192.168.0.1 OK 192.168.0.2 OK ... 192.168.255.253 OK 192.168.255.254 OK I am seeing in the log. Aug 22 16:34:57 domain amavis[28466]: (28466-01) Passed CLEAN, [192.168.56.137] <bk9729(a)domain.com> -> <gerberb(a)zenez.com>, Message-ID: <000001c7e50c$a763eae0$8938a8c0@Computer24>, mail_id: 3JJwAafw5Rhl, Hits: -4.147, 6911 ms Aug 22 16:34:57 domain postfix/smtp[28583]: AAED3A0C9A: to=<gerberb(a)zenez.com>, relay=127.0.0.1[127.0.0.1], delay=8, status=sent (250 2.6.0 Ok, id=28466-01, from MTA([127.0.0.1]:10025): 250 Ok: queued as 858ACA0CED) Aug 22 16:34:57 domain postfix/qmgr[4201]: AAED3A0C9A: removed Aug 22 16:35:18 domain pop3d: Connection, ip=[::ffff:192.168.56.137] Aug 22 16:35:19 domain pop3d: LOGIN, user=bk9729, ip=[::ffff:192.168.56.137] Aug 22 16:35:19 domain pop3d: LOGOUT, user=bk9729, ip=[::ffff:192.168.56.137], top=0, retr=0, time=0 Aug 22 16:35:23 domain postfix/smtp[28583]: 858ACA0CED: to=<gerberb(a)zenez.com>, relay=zenez.com[166.70.62.2], delay=26, status=sent (250 2.0.0 Ok: queued as B04573F680) Aug 22 16:35:23 domain postfix/qmgr[4201]: 858ACA0CED: removed Aug 22 16:35:34 domain pop3d: Connection, ip=[::ffff:192.168.56.137] Aug 22 16:35:34 domain pop3d: LOGIN, user=bk9729, ip=[::ffff:192.168.56.137] Aug 22 16:35:34 domain pop3d: LOGOUT, user=bk9729, ip=[::ffff:192.168.56.137], top=0, retr=0, time=0 Aug 22 16:38:10 domain postfix/anvil[28580]: statistics: max connection rate 1/60s for (smtp:192.168.56.137) at Aug 22 16:34:44 Aug 22 16:38:10 domain postfix/anvil[28580]: statistics: max connection count 1 for (smtp:192.168.56.137) at Aug 22 16:34:44 Aug 22 16:38:10 domain postfix/anvil[28580]: statistics: max cache size 1 at Aug 22 16:34:44 So I think the problem is that postfix is comparing ::ffff:192.168.56.137 instead of 192.168.56.137. Or I may be missing something more. Any ideas on how to fix this. Thanks, -- Boyd Gerber <gerberb(a)zenez.com> ZENEZ 1042 East Fort Union #135, Midvale Utah 84047 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 5

[opensuse] kappfinder replacement
by Ben Kevan 25 Aug '07

25 Aug '07

So it seems as though there is no more kappfinder in the kde.. Is there a replacement? Or will kappfinder be put back into kdebase3-extra? -- How much can you know about yourself, you've never been in a fight? I don't wanna die without any scars. So come on; hit me -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 8

[opensuse] stopping kmobile
by jdd 25 Aug '07

25 Aug '07

Hello :-) Sometime ago, I tried Kmobile, but my cellular phone is not recognised. However from then, Kmobile keep trying to start each time I switch my computer on an this is really unpleasant. There is no option to stop this in the progamm config and no notice of kmobile in .kde. what can I do to stop it? thanks jdd -- http://www.dodin.net http://gourmandises.orangeblog.fr/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] adding SLL-OSS-factory source with zypper gives media exception
by Cristea Bogdan 25 Aug '07

25 Aug '07

I have openSuSE 10.2 and I try to add the SLL-OSS-factory source in order to install the latest version of eclipse-cdt (4.0). Using zypper I obtain an error. Here is the entire message: zypper sa http://download.opensuse.org/distribution/SL-OSS-factory/inst-source/suse oss-factory 3505 zmd ZENworks Management Daemon is running. WARNING: this command will not synchronize changes. Use rug or yast2 for that. Determining http://download.opensuse.org/distribution/SL-OSS-factory/inst-source/suse source type... http://download.opensuse.org/distribution/SL-OSS-factory/inst-source/suse is type YUM Not found: Media Exception -- Cristea Bogdan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

RE: [opensuse] bash prompt login question
by James D. Parra 24 Aug '07

24 Aug '07

Sloan wrote: > James D. Parra wrote: > >> Specifically, :/bin/bash >> >> It is odd. >> >> > > It is a strange state of affairs, to be sure. Did you say he has the > exact same .bashrc and .bash_login/.bash_profile as everybody else? > You may want to check his ~/.profile also - it turns out that is read after .bashrc and a prompt could be set in that file. ~~~~~ Thanks for the tip. I'll be checking that out. Best regards, ~James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

RE: [opensuse] bash prompt login question
by James D. Parra 24 Aug '07

24 Aug '07

James D. Parra wrote: > Fri, 24 Aug 2007, by Jamesp(a)MusicReports.com: > > >> Hello, >> >> I have a user who doesn't get the normal bash prompt when he logs in, just >> > a > >> simple 'sh' prompt, for example; >> >> server Fri Aug 24 09:15:00 >> ~ $ >> <snip> >> > > Is the user's info in /etc/passwd correct? > > ~~~ > It appears that it is since he is able to login to the server. I actually > did update it again since I deleted his original account and set it up a new > account with his usual username & password. The info in /etc/passwd appear > correct. > By 'correct', I think he's specifically asking which shell, if any, is shown in field 7 ~~~~~ Specifically, :/bin/bash It is odd. Regards, ~James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

RE: [opensuse] bash prompt login question
by James D. Parra 24 Aug '07

24 Aug '07

Fri, 24 Aug 2007, by Jamesp(a)MusicReports.com: > Hello, > > I have a user who doesn't get the normal bash prompt when he logs in, just a > simple 'sh' prompt, for example; > > server Fri Aug 24 09:15:00 > ~ $ > <snip> Is the user's info in /etc/passwd correct? ~~~ It appears that it is since he is able to login to the server. I actually did update it again since I deleted his original account and set it up a new account with his usual username & password. The info in /etc/passwd appear correct. Thank you, ~James Sorry Theo for the direct reply. jp -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] zmd update status
by Kai Ponte 24 Aug '07

24 Aug '07

I was just trying to do a few things on my laptop (centrino duo 2GHz/2GB RAM/160G 7200RPM HDD) and noticed things were running really slow. I couldn't update web pages, my CD ripping went way slow, and NetBeans was taking forever to load an app. I hit CTRL+ESC to see what was going on and noticed a process was taking up 78% of system resources and 36% of user resources. I killed it and things got instantly better. The process was zmd update-status. What's that? I googled it, thinking it might be the cursed Zen Updater, but I know I removed zmd-daemon. I wonder if it could be this? http://en.opensuse.org/Libzypp/ZMD/ZMD7.1/helpers/update-status What could this be and how do I get rid of it? kai ponte www.perfectreign.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

7 8

[opensuse] bash prompt login question
by James D. Parra 24 Aug '07

24 Aug '07

Hello, I have a user who doesn't get the normal bash prompt when he logs in, just a simple 'sh' prompt, for example; server Fri Aug 24 09:15:00 ~ $ <snip> All other users get the detailed bash prompt, for example; server Fri Aug 24 09:16:00 username@server:/home/username> <snip> I copied over one of the others user's .bashrc file (all are generic to the Suse install)to his home dir' and changed the ownership to the above user, but with no effect. Even deleting and recreating his account didn't solve the problem. What made this user's login so different than the others? At any rate, how can I fix this? Is there something missing? Many thanks, ~James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] Firefox and bizarre printing behaviour
by G T Smith 24 Aug '07

24 Aug '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 For some bizarre reason my Firefox has started printing in a kind of landscape mode, (switching to landscape mode give a seriously out of position portrait mode...) Nothing else seems to be effected by this issue and I have no idea what started this... Anyone experiencing something similar recently... - -- ============================================================================== I have always wished that my computer would be as easy to use as my telephone. My wish has come true. I no longer know how to use my telephone. Bjarne Stroustrup ============================================================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGzzU5asN0sSnLmgIRAkTEAKD5R0dhUugIyVBSNqCGImxBsqXkpQCeJWeC fkzww6Ru5agcj733mtDHA5I= =34dF -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Viewsonic VX255WMB webcam
by Art Fore 24 Aug '07

24 Aug '07

I have a new Viewsonic WX2255WMB monitor (To replace VA2012 with dead DVI input) with builtin webcam. I have not been able to determine what driver is necessary for it. The only other information other than that below is that it is a Chicony 1.3 MPixel USB 2.0 camera. usb 1-8: new high speed USB device using ehci_hcd and address 4 usb 1-8: new device found, idVendor=04f2, idProduct=b021 usb 1-8: new device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-8: Product: ViewSonic 1.3M, USB2.0 Webcam usb 1-8: Manufacturer: Chicony Electronics Co., Ltd. kernel: usb 1-8: SerialNumber: SN0001 Can anyone help me with this please? OH, I forgot, this is in Suse 10.3 Beta1 or Suse 10.2. Art -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Require all local IP to only send to local IP and Restrict local.domain.com to local.domain.com
by Boyd Lynn Gerber 24 Aug '07

24 Aug '07

Hello, I want to restrict all CLIENTS in 192.168.0.0/16 to send only to local domains. That is 192.168.0.0/16 only can send between 192.168.0.0/16. I have other public IP's that should be able to send any where. I am subsituting domain.com for the real domain. I am using. smtpd_restriction_classes = local_only local_only = reject_unlisted_recipient permit_auth_destination smtpd_recipient_restrictions = check_client_access cidr:/etc/postfix/clients_local_only permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination So I have in /etc/postfix/clients_local_only. --------------------------client_local_only------------------------------- 192.168.0.0/16 local_only --------------------------client_local_only------------------------------- I have in /etc/postfix/access all 64770 IP's with local_only: ----------------------------access---------------------------------------- domain.com OK public_ip OK ... 192.168.0.1 local_only ... 192.168.255.254 ----------------------------access---------------------------------------- I have now the above and below is my main.cf, but they can send outside of 192.168.x.x ----------------------------------Main.cf------------------------------- recipient_delimiter = + debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5 sendmail_path = /usr/sbin/sendmail newaliases_path = /usr/bin/newaliases setgid_group = maildrop html_directory = /usr/share/doc/packages/postfix/html manpage_directory = /usr/share/man sample_directory = /usr/share/doc/packages/postfix/samples readme_directory = /usr/share/doc/packages/postfix/README_FILES inet_protocols = all biff = no mail_spool_directory = /var/mail canonical_maps = hash:/etc/postfix/canonical virtual_alias_maps = hash:/etc/postfix/virtual virtual_alias_domains = hash:/etc/postfix/virtual relocated_maps = hash:/etc/postfix/relocated transport_maps = hash:/etc/postfix/transport sender_canonical_maps = hash:/etc/postfix/sender_canonical masquerade_exceptions = root masquerade_classes = envelope_sender, header_sender, header_recipient myhostname = domain.domain.com program_directory = /usr/lib/postfix inet_interfaces = all masquerade_domains = domain.com mydestination = domain.com, $myhostname, localhost.$mydomain, mail.domain.com defer_transports = mynetworks_style = subnet disable_dns_lookups = no relayhost = mailbox_command = mailbox_transport = strict_8bitmime = no disable_mime_output_conversion = no strict_rfc821_envelopes = no alias_maps = hash:/etc/aliases mailbox_size_limit = 0 message_size_limit = 10240000 smtpd_restriction_classes = local_only local_only = reject_unlisted_recipient permit_auth_destination smtpd_recipient_restrictions = check_client_access cidr:/etc/postfix/clients_local_only permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination smtpd_sender_restrictions = hash:/etc/postfix/access smtpd_client_restrictions = smtpd_helo_required = no smtpd_helo_restrictions = smtp_sasl_auth_enable = no smtpd_sasl_auth_enable = yes smtpd_use_tls = yes smtp_use_tls = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_tls_auth_only = no smtp_tls_note_starttls_offer = yes smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom home_mailbox = Maildir/ header_checks = regexp:/etc/postfix/maps/header_checks mime_header_checks = regexp:/etc/postfix/maps/mime_header_checks body_checks = regexp:/etc/postfix/maps/body_checks ----------------------------------Main.cf------------------------------- What am I missing? -- Boyd Gerber <gerberb(a)zenez.com> ZENEZ 1042 East Fort Union #135, Midvale Utah 84047 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 3

[opensuse] cups refuses to print a certain page.
by Carlos E. R. 24 Aug '07

24 Aug '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I was printing a 300 page job, page by page, from a script (that adds a label), but it get stuck at page 163: psselect -p$PAGE $FILE /tmp/pagina.ps echo "Sending page $PAGE to default printer" lp /tmp/pagina.ps -o page-label="$PAGE" lpq shows the pages as "printing": tp0 is ready and printing Rank Owner Job File(s) Total Size active cer 1409 pagina.ps 57344 bytes It seems to be printing, looking at the process list: 18564 ? Ss 0:00 /usr/sbin/cupsd -c /etc/cups/cupsd.conf 18570 ? S 0:00 \_ /bin/bash /usr/lib/cups/filter/pstoturboprint 1409 cer pagina.ps 1 page-label=163 cpi=10 lpi=6 InkType=Black_0 MediaType=Plainpaper_0 _kde-filters zedoColorModel=Gray PageSize=A4 Resolution=360x360dpi_1 zedoDithering=ErrorDiffusion InputSlot=AutomaticFeed zedoLicensedTo=LicenseOwner zedoColorCorrection=1 zedoUserColor=0 zedoMirror=0 zedoDuplexAdjust=0 zedoBrightness=0 zedoContrast=0 zedoGamut=0 zedoIntensity=0 zedoGamma=180 zedoColorY=0 zedoColorC=0 zedoColorM=0 zedoColorK=0 job-uuid=urn:uuid:3b273496-4625-3ca4-6b68-6805247ec89b 18588 ? S 0:00 | \_ /usr/bin/tpprint -a0 -e1 -s8268x11693 -v2 -l/var/log/turboprint_cups.log ---page-label=163 ---cpi=10 ---lpi=6 ---InkType=Black_0 ---MediaType=Plainpaper_0 ---_kde-filters ---zedoColorModel=Gray ---PageSize=A4 ---Resolution=360x360dpi_1 ---zedoDithering=ErrorDiffusion ---InputSlot=AutomaticFeed ---zedoLicensedTo=LicenseOwner ---zedoColorCorrection=1 ---zedoUserColor=0 ---zedoMirror=0 ---zedoDuplexAdjust=0 ---zedoBrightness=0 ---zedoContrast=0 ---zedoGamut=0 ---zedoIntensity=0 ---zedoGamma=180 ---zedoColorY=0 ---zedoColorC=0 ---zedoColorM=0 ---zedoColorK=0 ---job-uuid=urn:uuid:3b273496-4625-3ca4-6b68-6805247ec89b --ppdfile=/etc/cups/ppd/tp0.ppd --psheader=/tmp/pstoturboprint18570.chunk --jobid=1409 --username=cer --title=pagina.ps /tmp/pstoturboprint18570.fifo - 18571 ? S 0:00 \_ parallel:/dev/lp0 1409 cer pagina.ps 1 page-label=163 cpi=10 lpi=6 InkType=Black_0 MediaType=Plainpaper_0 _kde-filters zedoColorModel=Gray PageSize=A4 Resolution=360x360dpi_1 zedoDithering=ErrorDiffusion InputSlot=AutomaticFeed zedoLicensedTo=LicenseOwner zedoColorCorrection=1 zedoUserColor=0 zedoMirror=0 zedoDuplexAdjust=0 zedoBrightness=0 zedoContrast=0 zedoGamut=0 zedoIntensity=0 zedoGamma=180 zedoColorY=0 zedoColorC=0 zedoColorM=0 zedoColorK=0 job-uuid=urn:uuid:3b273496-4625-3ca4-6b68-6805247ec89b but the page 163 gets stuck and never prints. Looking at the /tmp/pagina.ps file with "gv", it is blank; it appears that I tried to print over the end of the book, but I can't understand why cups gets stuck. I have restarted cups in debug mode: D [24/Aug/2007:16:56:22 +0200] add_job: requesting-user-name="cer" I [24/Aug/2007:16:56:22 +0200] Adding start banner page "none" to job 1409. d [24/Aug/2007:16:56:22 +0200] copy_banner(0x800841f8[5], 0x8008a708[1409], none) d [24/Aug/2007:16:56:22 +0200] add_job_state_reasons(0x800841f8[5], 1409) d [24/Aug/2007:16:56:22 +0200] cupsdAddEvent(event=job-created, dest=0x80073528(tp0), job=0x8008a708(1409), text="Job created.", ...) D [24/Aug/2007:16:56:22 +0200] Discarding unused job-created event... d [24/Aug/2007:16:56:22 +0200] add_file(con=0x800841f8[5], job=1409, filetype=application/postscript, compression=0) I [24/Aug/2007:16:56:22 +0200] Adding end banner page "none" to job 1409. d [24/Aug/2007:16:56:22 +0200] copy_banner(0x800841f8[5], 0x8008a708[1409], none) I [24/Aug/2007:16:56:22 +0200] Job 1409 queued on "tp0" by "cer". D [24/Aug/2007:16:56:22 +0200] Job 1409 hold_until = 0 d [24/Aug/2007:16:56:22 +0200] cupsdSaveJob(job=0x8008a708(1409)): job->attrs=0x80087a00 d [24/Aug/2007:16:56:22 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:56:22 +0200] cupsdCheckJobs: Job 1409: state_value=3, loaded=yes d [24/Aug/2007:16:56:22 +0200] start_job: id = 1409, file = 0/1 d [24/Aug/2007:16:56:22 +0200] cupsdAddEvent(event=printer-state-changed, dest=0x80073528(tp0), job=(nil)(0), text="%s "%s" state changed.", ...) D [24/Aug/2007:16:56:22 +0200] Discarding unused printer-state-changed event... D [24/Aug/2007:16:56:22 +0200] job-sheets=none,none D [24/Aug/2007:16:56:22 +0200] banner_page = 0 D [24/Aug/2007:16:56:22 +0200] [Job 1409] argv[0]="tp0" D [24/Aug/2007:16:56:22 +0200] [Job 1409] argv[1]="1409" D [24/Aug/2007:16:56:22 +0200] [Job 1409] argv[2]="cer" D [24/Aug/2007:16:56:22 +0200] [Job 1409] argv[3]="pagina.ps" D [24/Aug/2007:16:56:22 +0200] [Job 1409] argv[4]="1" D [24/Aug/2007:16:56:22 +0200] [Job 1409] argv[5]="page-label=163 cpi=10 lpi=6 InkType=Black_0 MediaType=Plainpaper_0 _kde-filters zedoColorModel=Gray PageSize=A4 Resolution=360x360dpi_1 zedoDithering=ErrorDiffusion InputSlot=AutomaticFeed zedoLicensedTo=LicenseOwner zedoColorCorrection=1 zedoUserColor=0 zedoMirror=0 zedoDuplexAdjust=0 zedoBrightness=0 zedoContrast=0 zedoGamut=0 zedoIntensity=0 zedoGamma=180 zedoColorY=0 zedoColorC=0 zedoColorM=0 zedoColorK=0 job-uuid=urn:uuid:3b273496-4625-3ca4-6b68-6805247ec89b" D [24/Aug/2007:16:56:22 +0200] [Job 1409] argv[6]="/var/spool/cups/d01409-001" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[1]="CUPS_DATADIR=/usr/share/cups" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[2]="CUPS_DOCROOT=/usr/share/doc/packages/cups" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[6]="CUPS_SERVERROOT=/etc/cups" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[7]="CUPS_STATEDIR=/var/run/cups" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[9]="SERVER_ADMIN=root(a)nimrodel.valinor" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[10]="SOFTWARE=CUPS/1.2.7" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[11]="TMPDIR=/var/spool/cups/tmp" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[12]="USER=root" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[13]="CUPS_SERVER=localhost" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[14]="CUPS_ENCRYPTION=IfRequested" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[15]="IPP_PORT=631" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[16]="CHARSET=utf-8" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[17]="LANG=en_US" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[18]="PPD=/etc/cups/ppd/tp0.ppd" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[19]="RIP_MAX_CACHE=8m" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[20]="CONTENT_TYPE=application/postscript" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[21]="DEVICE_URI=parallel:/dev/lp0" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[22]="PRINTER=tp0" D [24/Aug/2007:16:56:22 +0200] [Job 1409] envp[23]="FINAL_CONTENT_TYPE=printer/tp0" d [24/Aug/2007:16:56:22 +0200] start_job: status_pipes = [ 9 10 ] d [24/Aug/2007:16:56:22 +0200] start_job: filter="/usr/lib/cups/filter/pstops" d [24/Aug/2007:16:56:22 +0200] start_job: filterfds[0]=[ 11 12 ] d [24/Aug/2007:16:56:22 +0200] cupsdStartProcess("/usr/lib/cups/filter/pstops", 0x8008a628, 0xbfc16ef8, -1, 12, 10) d [24/Aug/2007:16:56:22 +0200] start_job: Closing filter pipes for slot 1 [ -1 -1 ]... I [24/Aug/2007:16:56:22 +0200] Started filter /usr/lib/cups/filter/pstops (PID 18569) for job 1409. d [24/Aug/2007:16:56:22 +0200] start_job: print_pipes = [ 13 14 ] d [24/Aug/2007:16:56:22 +0200] start_job: filter="/usr/lib/cups/filter/pstoturboprint" d [24/Aug/2007:16:56:22 +0200] start_job: filterfds[1]=[ 13 14 ] d [24/Aug/2007:16:56:22 +0200] cupsdStartProcess("/usr/lib/cups/filter/pstoturboprint", 0x8008a628, 0xbfc16ef8, 11, 14, 10) d [24/Aug/2007:16:56:22 +0200] start_job: Closing filter pipes for slot 0 [ 11 12 ]... I [24/Aug/2007:16:56:22 +0200] Started filter /usr/lib/cups/filter/pstoturboprint (PID 18570) for job 1409. d [24/Aug/2007:16:56:22 +0200] start_job: backend="/usr/lib/cups/backend/parallel" d [24/Aug/2007:16:56:22 +0200] start_job: filterfds[0] = [ -1 -1 ] d [24/Aug/2007:16:56:22 +0200] cupsdStartProcess("/usr/lib/cups/backend/parallel", 0x8008a628, 0xbfc16ef8, 13, -1, 10) I [24/Aug/2007:16:56:22 +0200] Started backend /usr/lib/cups/backend/parallel (PID 18571) for job 1409. d [24/Aug/2007:16:56:22 +0200] start_job: Closing print pipes [ 13 14 ]... d [24/Aug/2007:16:56:22 +0200] start_job: Closing back pipes [ 7 8 ]... d [24/Aug/2007:16:56:22 +0200] start_job: Closing status output pipe 10... d [24/Aug/2007:16:56:22 +0200] start_job: Closing filter pipes for slot 0 [ -1 -1 ]... d [24/Aug/2007:16:56:22 +0200] start_job: Adding fd 9 to InputSet... d [24/Aug/2007:16:56:22 +0200] cupsdAddEvent(event=job-state, dest=0x80073528(tp0), job=0x8008a708(1409), text="Job #%d started.", ...) D [24/Aug/2007:16:56:22 +0200] Discarding unused job-state event... D [24/Aug/2007:16:56:22 +0200] cupsdProcessIPPRequest: 5 status_code=0 (successful-ok) d [24/Aug/2007:16:56:22 +0200] cupsdProcessIPPRequest: Adding fd 5 to OutputSet... d [24/Aug/2007:16:56:22 +0200] process_children() D [24/Aug/2007:16:56:22 +0200] PID 18569 (/usr/lib/cups/filter/pstops) exited with no errors. D [24/Aug/2007:16:56:22 +0200] [Job 1409] Page = 595x842; 10,20 to 586,833 D [24/Aug/2007:16:56:22 +0200] [Job 1409] slow_collate=0, slow_duplex=0, slow_order=0 D [24/Aug/2007:16:56:22 +0200] [Job 1409] Before copy_comments - %!PS-Adobe-3.0 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %!PS-Adobe-3.0 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%Title: (Microsoft Word - ... ) D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%Version: 1 3 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%CreationDate: 11:59:55 AM 08/24/2007 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%For: (Netrufo) D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%DocumentData: Clean7Bit D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%LanguageLevel: 3 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%BoundingBox: 0 0 595 842 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%HiResBoundingBox: 0.0 0.0 595.0 842.0 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%Pages: 0 0 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%DocumentProcessColors: (atend) D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%DocumentSuppliedResources: D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%+ procset (Adobe Acrobat - PDF operators) 1.2 0 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%+ procset (Adobe Acrobat - type operators) 1.2 0 D [24/Aug/2007:16:56:22 +0200] [Job 1409] %%EndComments D [24/Aug/2007:16:56:22 +0200] [Job 1409] Before copy_prolog - %%BeginDefaults D [24/Aug/2007:16:56:22 +0200] [Job 1409] Before copy_setup - %%BeginSetup D [24/Aug/2007:16:56:22 +0200] [Job 1409] Before page loop - %%Trailer D [24/Aug/2007:16:56:22 +0200] [Job 1409] Wrote 0 pages... d [24/Aug/2007:16:56:22 +0200] cupsdWriteClient: 5 bytes < 0 d [24/Aug/2007:16:56:22 +0200] cupsdWriteClient: Removing fd 5 from OutputSet... d [24/Aug/2007:16:56:22 +0200] cupsdReadClient: 5, used=0, file=-1 state=0 d [24/Aug/2007:16:56:22 +0200] cupsdReadClient: httpGets returned EOF... D [24/Aug/2007:16:56:22 +0200] cupsdCloseClient: 5 d [24/Aug/2007:16:56:22 +0200] cupsdCloseClient: Removing fd 5 from InputSet and OutputSet... d [24/Aug/2007:16:56:22 +0200] [Job 1409] STATE: +connecting-to-device d [24/Aug/2007:16:56:22 +0200] cupsdAddEvent(event=printer-state-changed, dest=0x80073528(tp0), job=(nil)(0), text="Printer "%s" state changed.", ...) D [24/Aug/2007:16:56:22 +0200] Discarding unused printer-state-changed event... d [24/Aug/2007:16:56:22 +0200] [Job 1409] STATE: -connecting-to-device d [24/Aug/2007:16:56:22 +0200] cupsdAddEvent(event=printer-state-changed, dest=0x80073528(tp0), job=(nil)(0), text="Printer "%s" state changed.", ...) D [24/Aug/2007:16:56:22 +0200] Discarding unused printer-state-changed event... D [24/Aug/2007:16:56:22 +0200] [Job 1409] backendRunLoop(print_fd=0, device_fd=4, use_bc=0) d [24/Aug/2007:16:56:23 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:56:27 +0200] cupsdAcceptClient(lis=0x80060640) 2 Clients = 0 D [24/Aug/2007:16:56:27 +0200] cupsdAcceptClient: 5 from localhost:631 (IPv4) d [24/Aug/2007:16:56:27 +0200] cupsdAcceptClient: 5 connected to server on localhost:631 d [24/Aug/2007:16:56:27 +0200] cupsdAcceptClient: Adding fd 5 to InputSet... d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=0, file=-1 state=0 D [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 POST / HTTP/1.1 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: uri = "/"... d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location /admin Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location / Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: best = / d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: Authorization="" D [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: No authentication data provided. d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... d [24/Aug/2007:16:56:27 +0200] POST / d [24/Aug/2007:16:56:27 +0200] CONTENT_TYPE = application/ipp d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=350, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=342, file=-1 state=6 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=342, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest(0x8008b998[5]): operation_id = 4002 D [24/Aug/2007:16:56:27 +0200] CUPS-Get-Printers d [24/Aug/2007:16:56:27 +0200] get_printers(0x8008b998[5], 0) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp(p=0x8005a4e0, op=4002(CUPS-Get-Printers)) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp: Found wildcard match... d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x8005b6a8((null)) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: op=0(unknown-0000) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... d [24/Aug/2007:16:56:27 +0200] add_printer_state_reasons(0x8008b998[5], 0x80060868[lp]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x8008a628, from=0x8006be70, ra=0x80084438, group=0, quickcopy=0) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8006bf80[printer-name,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8006c020[printer-info,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8006c1a8[job-sheets-default,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8006d190[printer-make-and-model,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x8008a628, from=0x800610b8, ra=0x80084438, group=0, quickcopy=-2147483648) d [24/Aug/2007:16:56:27 +0200] add_printer_state_reasons(0x8008b998[5], 0x8006ca28[lpg]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x8008a628, from=0x8006c460, ra=0x80084438, group=0, quickcopy=0) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8006cfd0[printer-name,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8006d830[printer-info,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8006d8f8[job-sheets-default,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8006d978[printer-make-and-model,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x8008a628, from=0x800610b8, ra=0x80084438, group=0, quickcopy=-2147483648) d [24/Aug/2007:16:56:27 +0200] add_printer_state_reasons(0x8008b998[5], 0x8009e3e8[tf0]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x8008a628, from=0x8009ea30, ra=0x80084438, group=0, quickcopy=0) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8009eaa8[printer-name,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8009eaf8[printer-info,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8009e0a0[job-sheets-default,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x80074b48[printer-make-and-model,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x8008a628, from=0x800610b8, ra=0x80084438, group=0, quickcopy=-2147483648) d [24/Aug/2007:16:56:27 +0200] add_printer_state_reasons(0x8008b998[5], 0x80073528[tp0]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x8008a628, from=0x8009e308, ra=0x80084438, group=0, quickcopy=0) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8009e380[printer-name,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8009e0f8[printer-info,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x8009e1c0[job-sheets-default,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x8008a628, 0x80081660[printer-make-and-model,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x8008a628, from=0x800610b8, ra=0x80084438, group=0, quickcopy=-2147483648) D [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: 5 status_code=0 (successful-ok) d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: Adding fd 5 to OutputSet... d [24/Aug/2007:16:56:27 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: 5 bytes < 0 d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: Removing fd 5 from OutputSet... d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=0, file=-1 state=0 D [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 POST / HTTP/1.1 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: uri = "/"... d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location /admin Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location / Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: best = / d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: Authorization="" D [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: No authentication data provided. d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... d [24/Aug/2007:16:56:27 +0200] POST / d [24/Aug/2007:16:56:27 +0200] CONTENT_TYPE = application/ipp d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=350, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=342, file=-1 state=6 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=342, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest(0x8008b998[5]): operation_id = 4005 D [24/Aug/2007:16:56:27 +0200] CUPS-Get-Classes d [24/Aug/2007:16:56:27 +0200] get_printers(0x8008b998[5], 1) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp(p=0x8005a4e0, op=4005(CUPS-Get-Classes)) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp: Found wildcard match... d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x8005b6a8((null)) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: op=0(unknown-0000) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... D [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: 5 status_code=0 (successful-ok) d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: Adding fd 5 to OutputSet... d [24/Aug/2007:16:56:27 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: 5 bytes < 0 d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: Removing fd 5 from OutputSet... d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=0, file=-1 state=0 D [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 POST / HTTP/1.1 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: uri = "/"... d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location /admin Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location / Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: best = / d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: Authorization="" D [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: No authentication data provided. d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... d [24/Aug/2007:16:56:27 +0200] POST / d [24/Aug/2007:16:56:27 +0200] CONTENT_TYPE = application/ipp d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=75, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=67, file=-1 state=6 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=67, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest(0x8008b998[5]): operation_id = 4001 D [24/Aug/2007:16:56:27 +0200] CUPS-Get-Default d [24/Aug/2007:16:56:27 +0200] get_default(0x8008b998[5]) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp(p=0x8005a4e0, op=4001(CUPS-Get-Default)) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp: Found wildcard match... d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x8005b6a8((null)) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: op=0(unknown-0000) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... d [24/Aug/2007:16:56:27 +0200] add_printer_state_reasons(0x8008b998[5], 0x80073528[tp0]) d [24/Aug/2007:16:56:27 +0200] printer-uri-supported="ipp://localhost:631/printers/tp0" d [24/Aug/2007:16:56:27 +0200] add_queued_job_count(0x8008b998[5], 0x80073528[tp0]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x80084ba8, from=0x8009e308, ra=(nil), group=0, quickcopy=0) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e330[uri-authentication-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e358[uri-security-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e380[printer-name,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e3a8[printer-location,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e0f8[printer-info,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e120[printer-more-info,4,45]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e148[job-quota-period,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e170[job-k-limit,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e198[job-page-limit,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e1c0[job-sheets-default,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8009e1f0[device-uri,4,45]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80081218[color-supported,4,22]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80081608[pages-per-minute,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80081660[printer-make-and-model,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80076b88[media-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80076e40[media-default,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80077088[port-monitor,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800770b0[port-monitor-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80073a50[finishings-supported,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800770d8[finishings-default,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80073af8[document-format-supported,4,49]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80073c60[copies-default,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800771a8[job-hold-until-default,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800771d0[job-priority-default,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800771f8[number-up-default,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80077220[orientation-requested-default,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x80084ba8, from=0x800610b8, ra=(nil), group=0, quickcopy=-2147483648) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006be18[charset-configured,4,47]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006d080[charset-supported,4,47]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80061738[compression-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006bdb0[copies-supported,4,33]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006bce0[document-format-default,4,49]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006bc88[generated-natural-language-supported,4,48]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800617b8[ipp-versions-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800613c0[job-hold-until-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006bc60[job-priority-supported,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800771f8[number-up-default,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80077220[orientation-requested-default,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x80084ba8, from=0x800610b8, ra=(nil), group=0, quickcopy=-2147483648) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006be18[charset-configured,4,47]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006d080[charset-supported,4,47]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80061738[compression-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006bdb0[copies-supported,4,33]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006bce0[document-format-default,4,49]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006bc88[generated-natural-language-supported,4,48]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800617b8[ipp-versions-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800613c0[job-hold-until-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006bc60[job-priority-supported,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800615c8[job-sheets-supported,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80061320[multiple-document-handling-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006b978[multiple-document-jobs-supported,4,22]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006b1f0[multiple-operation-time-out,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006b190[natural-language-configured,4,48]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006bd60[notify-attributes-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006b130[notify-lease-duration-default,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006b0d8[notify-lease-duration-supported,4,33]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80061880[notify-max-events-supported,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80061820[notify-events-default,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006b2c8[notify-events-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80061858[notify-pull-method-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006d018[notify-schemes-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006b9c0[number-up-supported,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x8006ba48[operations-supported,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800732e0[orientation-requested-supported,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80061350[page-ranges-supported,4,22]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80061398[pdl-override-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x80061260[printer-error-policy-supported,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ba8, 0x800610e0[printer-op-policy-supported,4,42]) D [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: 5 status_code=0 (successful-ok) d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: Adding fd 5 to OutputSet... d [24/Aug/2007:16:56:27 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: 5 bytes < 0 d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: Removing fd 5 from OutputSet... d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=0, file=-1 state=0 D [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 POST / HTTP/1.1 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: uri = "/"... d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location /admin Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location / Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: best = / d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: Authorization="" D [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: No authentication data provided. d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... d [24/Aug/2007:16:56:27 +0200] POST / d [24/Aug/2007:16:56:27 +0200] CONTENT_TYPE = application/ipp d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=119, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=111, file=-1 state=6 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=111, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest(0x8008b998[5]): operation_id = 000b D [24/Aug/2007:16:56:27 +0200] Get-Printer-Attributes ipp://localhost/printers/tp0 d [24/Aug/2007:16:56:27 +0200] get_printer_attrs(0x8008b998[5], ipp://localhost/printers/tp0) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp(p=0x8005a4e0, op=b(Get-Printer-Attributes)) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp: Found wildcard match... d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x8005b6a8((null)) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: op=0(unknown-0000) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... d [24/Aug/2007:16:56:27 +0200] add_printer_state_reasons(0x8008b998[5], 0x80073528[tp0]) d [24/Aug/2007:16:56:27 +0200] printer-uri-supported="ipp://localhost:631/printers/tp0" d [24/Aug/2007:16:56:27 +0200] add_queued_job_count(0x8008b998[5], 0x80073528[tp0]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x800851a8, from=0x8009e308, ra=(nil), group=0, quickcopy=0) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e330[uri-authentication-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e358[uri-security-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e380[printer-name,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e3a8[printer-location,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e0f8[printer-info,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e120[printer-more-info,4,45]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e148[job-quota-period,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e170[job-k-limit,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e198[job-page-limit,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e1c0[job-sheets-default,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8009e1f0[device-uri,4,45]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80081218[color-supported,4,22]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80081608[pages-per-minute,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80081660[printer-make-and-model,4,41]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80076b88[media-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80076e40[media-default,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80077088[port-monitor,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800770b0[port-monitor-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80073a50[finishings-supported,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800770d8[finishings-default,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80073af8[document-format-supported,4,49]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80073c60[copies-default,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800771a8[job-hold-until-default,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800771d0[job-priority-default,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800771f8[number-up-default,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80077220[orientation-requested-default,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x800851a8, from=0x800610b8, ra=(nil), group=0, quickcopy=-2147483648) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006be18[charset-configured,4,47]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006d080[charset-supported,4,47]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80061738[compression-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006bdb0[copies-supported,4,33]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006bce0[document-format-default,4,49]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006bc88[generated-natural-language-supported,4,48]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800617b8[ipp-versions-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800613c0[job-hold-until-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006bc60[job-priority-supported,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800615c8[job-sheets-supported,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80061320[multiple-document-handling-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006b978[multiple-document-jobs-supported,4,22]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006b1f0[multiple-operation-time-out,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006b190[natural-language-configured,4,48]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006bd60[notify-attributes-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006b130[notify-lease-duration-default,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006b0d8[notify-lease-duration-supported,4,33]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80061880[notify-max-events-supported,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80061820[notify-events-default,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006b2c8[notify-events-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80061858[notify-pull-method-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006d018[notify-schemes-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006b9c0[number-up-supported,4,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x8006ba48[operations-supported,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800732e0[orientation-requested-supported,4,23]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80061350[page-ranges-supported,4,22]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80061398[pdl-override-supported,4,44]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x80061260[printer-error-policy-supported,4,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x800851a8, 0x800610e0[printer-op-policy-supported,4,42]) D [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: 5 status_code=0 (successful-ok) d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: Adding fd 5 to OutputSet... d [24/Aug/2007:16:56:27 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: 5 bytes < 0 d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: Removing fd 5 from OutputSet... d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=0, file=-1 state=0 D [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 POST / HTTP/1.1 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: uri = "/"... d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0 d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location /admin Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: Location / Limit 7f d [24/Aug/2007:16:56:27 +0200] cupsdFindBest: best = / d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: Authorization="" D [24/Aug/2007:16:56:27 +0200] cupsdAuthorize: No authentication data provided. d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x800603a0(/) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... d [24/Aug/2007:16:56:27 +0200] POST / d [24/Aug/2007:16:56:27 +0200] CONTENT_TYPE = application/ipp d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=119, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=111, file=-1 state=6 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5 con->data_encoding=HTTP_ENCODE_LENGTH, con->data_remaining=111, con->file=-1 d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest(0x8008b998[5]): operation_id = 000a D [24/Aug/2007:16:56:27 +0200] Get-Jobs ipp://localhost/printers/tp0 d [24/Aug/2007:16:56:27 +0200] get_jobs(0x8008b998[5], ipp://localhost/printers/tp0) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp(p=0x8005a4e0, op=a(Get-Jobs)) d [24/Aug/2007:16:56:27 +0200] cupsdFindPolicyOp: Found wildcard match... d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: con->uri="/", con->best=0x8005b6a8((null)) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: level=AUTH_ANON, type=AUTH_NONE, satisfy=AUTH_SATISFY_ALL, num_names=0 d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: op=0(unknown-0000) d [24/Aug/2007:16:56:27 +0200] cupsdIsAuthorized: auth=AUTH_ALLOW... d [24/Aug/2007:16:56:27 +0200] get_jobs: job->id = 1409 d [24/Aug/2007:16:56:27 +0200] get_jobs: count = 1 d [24/Aug/2007:16:56:27 +0200] add_job_state_reasons(0x8008b998[5], 1409) d [24/Aug/2007:16:56:27 +0200] copy_attrs(to=0x80084ad8, from=0x80087a00, ra=(nil), group=2, quickcopy=0) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087ae0[printer-uri,2,45]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087b60[job-originating-user-name,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087b88[job-name,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087bf0[document-format,2,49]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087c40[page-label,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087cf0[job-sheets,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087ca8[cpi,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087db8[lpi,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087e20[InkType,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087e88[MediaType,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087ed0[_kde-filters,2,22]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087f20[zedoColorModel,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087f90[PageSize,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80087fd8[Resolution,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80088048[zedoDithering,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x800880c0[InputSlot,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80088108[zedoLicensedTo,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80088180[zedoColorCorrection,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x800881f0[zedoUserColor,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80088260[zedoMirror,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x800882a8[zedoDuplexAdjust,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x800882f8[zedoBrightness,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80088348[zedoContrast,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x80088398[zedoGamut,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x800883e0[zedoIntensity,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008a4a0[zedoGamma,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008a508[zedoColorY,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008a550[zedoColorC,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008a598[zedoColorM,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008a5e0[zedoColorK,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008a6d0[job-priority,2,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008a890[job-uuid,2,45]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008a950[job-originating-host-name,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008a9c8[time-at-creation,2,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008aa18[time-at-processing,2,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008aa68[time-at-completed,2,13]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008aab8[job-id,2,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008ab00[job-state,2,23]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008ab48[job-media-sheets-completed,2,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008aba0[job-printer-uri,2,45]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008abf0[job-name,2,42]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008ac18[job-k-octets,2,21]) d [24/Aug/2007:16:56:27 +0200] copy_attribute(0x80084ad8, 0x8008ac68[job-hold-until,2,44]) D [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: 5 status_code=0 (successful-ok) d [24/Aug/2007:16:56:27 +0200] cupsdProcessIPPRequest: Adding fd 5 to OutputSet... d [24/Aug/2007:16:56:27 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: 5 bytes < 0 d [24/Aug/2007:16:56:27 +0200] cupsdWriteClient: Removing fd 5 from OutputSet... d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: 5, used=0, file=-1 state=0 d [24/Aug/2007:16:56:27 +0200] cupsdReadClient: httpGets returned EOF... D [24/Aug/2007:16:56:27 +0200] cupsdCloseClient: 5 d [24/Aug/2007:16:56:27 +0200] cupsdCloseClient: Removing fd 5 from InputSet and OutputSet... d [24/Aug/2007:16:56:28 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:56:39 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:56:39 +0200] cupsdCheckJobs: Job 1409: state_value=5, loaded=yes d [24/Aug/2007:16:56:39 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:56:50 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:56:50 +0200] cupsdCheckJobs: Job 1409: state_value=5, loaded=yes d [24/Aug/2007:16:56:50 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:57:01 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:57:01 +0200] cupsdCheckJobs: Job 1409: state_value=5, loaded=yes d [24/Aug/2007:16:57:01 +0200] stringpool: 1231 strings, 10328 allocated, 18160 total bytes d [24/Aug/2007:16:57:01 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:57:12 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:57:12 +0200] cupsdCheckJobs: Job 1409: state_value=5, loaded=yes d [24/Aug/2007:16:57:12 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:57:23 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:57:23 +0200] cupsdCheckJobs: Job 1409: state_value=5, loaded=yes d [24/Aug/2007:16:57:23 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:57:34 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:57:34 +0200] cupsdCheckJobs: Job 1409: state_value=5, loaded=yes d [24/Aug/2007:16:57:34 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:57:45 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:57:45 +0200] cupsdCheckJobs: Job 1409: state_value=5, loaded=yes d [24/Aug/2007:16:57:45 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:57:56 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:57:56 +0200] cupsdCheckJobs: Job 1409: state_value=5, loaded=yes d [24/Aug/2007:16:57:56 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:58:07 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 d [24/Aug/2007:16:58:07 +0200] cupsdCheckJobs: Job 1409: state_value=5, loaded=yes d [24/Aug/2007:16:58:07 +0200] stringpool: 1231 strings, 10328 allocated, 18160 total bytes d [24/Aug/2007:16:58:07 +0200] select_timeout: 11 seconds to process active jobs d [24/Aug/2007:16:58:18 +0200] cupsdCheckJobs: 1 active jobs, sleeping=0, reload=0 And it doesn't print anything. The page is blank, but it should do something, complain of an error, something... but it just stays there, silent. Of course, the error is mine, trying to print a non existing page, but... is it also a bug? :-? - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGzvdptTMYHG2NR9URAnFPAJ4i84/tZljf+ZeAg+1xhYuDAZ5dcACfSCep dLvbo063oAMy3/sPnjPIfcQ= =DT22 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 5

[opensuse] How do I run isag on SLES9?
by Xn Nooby 24 Aug '07

24 Aug '07

I have a bunch of files in /var/log/sa with names like: sa.2007_08_23 sa.2007_08_24 sa4.2007_08_23 sa4.2007_08_24 And I can view them with sar like this: sar -f sa.2007_08_23 -A But I cannot get isag to view the files. Apparently isag calls sar, so I have tried many things like: isag -f sa.2007_08_23 -A and even: cp sa.2007_08_23 sa23 isag sa23 But nothing seems to work. I also can't find any examples anywhere. isag always comes up saying there is not input file. How is isag supposed to be invoked? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] How do I graph sar files from sysstat?
by Xn Nooby 24 Aug '07

24 Aug '07

Hello, I installed sysstat, and it is running and producing daily reports in /var/log/sa. Each day has a "sa" file and a "sar" files. It's been hard to find out exactly how to read these files. Is there a way to graph the data in these files, so I can see things like CPU utilization over a period of time? I've reading the sysstam website, but I'm having a hard grasping how exactly it works. Since are daily data files, I guess I cannot report on more than a day at a time? I'm hoping to find a GUI tool to let me graph the data. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] Strange choice of mirror
by Clayton 24 Aug '07

24 Aug '07

A friend is installing openSUSE10.2 on his computer today... and when the update mirror part of the install queried for the closest mirrof he got: http://ftp.chg.ru/pub/Linux/SuSE/suse/update/10.2 but... he's in the Netherlands. This only showed up as a problem because a lot of the packages on the Russian mirror seem to be missing or wrong versions. The result is that he has to click Skip on about 40% of the apps being updated on the install. Why would the Russian server be picked over a much closer and faster one in Germany? (the usual choice is usually one of the university servers in western Germany) If this is an "official" mirror - as would be assumed since it is in the list of mirrors that the installer checks - why would it be missing so many apps? C. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Is there a linux based program that can handle .drw files?
by Robert Smits 24 Aug '07

24 Aug '07

Some years ago I used my home gardening program, Key Home Gardener, which was a 16 bit Windows program, to lay out my lot, my septic system, and my landscaping. It produces files in a .drw format, which is a Microsoft vector format. Is there any Linux based program that will allow me to view my .drw files? -- Bob Smits Ph 250-245-2553 Fax 250-245-5531 E-mail bob(a)rsmits.ca -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 12

[opensuse] move SuSE from one harddisk to another
by Zhang Weiwu 24 Aug '07

24 Aug '07

Hello. After installed additional 320GB harddisk to my desktop computer which used to have OpenSuSE 10.2 installed on single harddisk (80GB), naturally I prefer using the new and fast harddisk for '/' and use the old and slow harddisk for data only (e.g. /var) So, using fdisk I preserved space for '/' on the new harddisk, and use 'rsync -ravxD' to move all data from old '/' to the new partition on new harddisk. Next step is to make the new harddisk bootable, I did by running: # grub > root (hd1,1) > setup (hd1) > quit Then I set hd1 to be the booting harddisk in my BOIS settings. Reboot. I didn't see the usual grub booting process, I see some random ascii code displayed on screen, ending with a smiling face, and stops there. I thought it should be simple: 1) copy everything to the new partition on new harddisk (I did with rsync) and 2) make it bootable. Did I miss anything? Thanks in advance! I am not good at these booting stuff and is learning. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 9

[opensuse] Viewsonic VX255WMB webcam
by Art Fore 24 Aug '07

24 Aug '07

I have a new Viewsonic WX2255WMB monitor (To replace VA2012 with dead DVI input) with builtin webcam. I have not been able to determine what driver is necessary for it. The only other information other than that below is that it is a Chicony 1.3 MPixel USB 2.0 camera. usb 1-8: new high speed USB device using ehci_hcd and address 4 usb 1-8: new device found, idVendor=04f2, idProduct=b021 usb 1-8: new device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-8: Product: ViewSonic 1.3M, USB2.0 Webcam usb 1-8: Manufacturer: Chicony Electronics Co., Ltd. kernel: usb 1-8: SerialNumber: SN0001 Can anyone help me with this please? OH, I forgot, this is in Suse 10.3 Beta1 or Suse 10.2. Art -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] SAMBA Team - Still no SiSE rpms for 3.0.25c
by David C. Rankin 24 Aug '07

24 Aug '07

Jerry, all; Is anyone still building rpms for SuSE? They used to be built the same day of the release, now they are trailing far behind. Is Lars still with opensuse and still building?? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Suddenly CPU1 Not Working
by Rick Friedman 24 Aug '07

24 Aug '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 For some reason, today CPU1 is not working properly while the machine is in openSuSE 10.2. My machine is a dual-boot machine with the other OS being... well... the OTHER OS. It's an Intel core duo. Until today, everything was working fine. Suddenly, CPU1 is not working. CPU0 works fine. CPU1 works fine in the other OS. Below are some messages that occurred during boot up today: Initializing CPU#1 Kernel panic - not syncing: smp_callin: CPU1 started up but did not get a callout! Stuck ?? Inquiring remote APIC #1... ... APIC #1 ID: failed ... APIC #1 VERSION: failed ... APIC #1 SPIV: failed Brought up 1 CPUs Anyone have any ideas as to what might be happening? Thanks, Rick - -- Rick's Law: What cannot be imagined will be accomplished by a fool. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGy7SvPIcjS54RJeARAoVrAJ9jdegMPVTtP2twc3i++Y0KMEMRiQCfShUY B2U+odlrP+H26F5x8AA3vdM= =XNgY -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] No cd/dvd after kde update - same but different
by Amit Finkler 24 Aug '07

24 Aug '07

Hi all, I've also posted this on SuSEforums.net, but I'm really desperate here so please understand. My problem is very similar to the one described in: http://lists.opensuse.org/opensuse/2007-08/msg01373.html. Other than not being able to read the removable devices, i.e. CD-ROM, disk-on-key, etc., I also can't see any of my USB devices with 'lsusb' (even as root). I followed what Yavor did in the above link, and reinstalled KDEbase/KDE from the official repositories. However, in contrast to his success, nothing changed in my system. Any ideas? Thanks, Amit. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] MD5SUMS for applied deltas
by Ken Schneider 24 Aug '07

24 Aug '07

Seems that after every release we need to beg to get the MD5SUMS for the iso after we apply the delta iso. Could someone please calc these and supply them? Ken -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Printing photos easily.
by pelibali 24 Aug '07

24 Aug '07

Hi, I'm new to linux and this evening attempted to print some of my photos... First I tried the newest Picasa under my openSUSE 10.0, but it resulted _draft_ quality _B/W_ prints, even that 1200 DPI has been setup generally for our HP DeskJet 5940. Picasa's template is generally OK, because could place easily e.g. four of my photos on a single A4 page, but the draft quality I couldn't overcome. Of course I tried the options (theoretically) resulting better quality printouts and also checked the printer's default settings, which was normal quality/color. Therefore have no idea, how to work around this, because Picasa has quite limited print setup options under Linux and search at Google didn't help at all. At the end we managed to print the above four images via an OpenOffice.org template my boyfriend prepared few months ago and like that we succeeded. With Gimp I had bad experience in the past, so this way was not tried now. Would you give me please any hints/ideas on your preference when printing photos; I would be quite interested to hear some possibili- ties. Thank you, Agnes -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 7

[opensuse] Re: Is there a linux based program that can handle .drw files?
by Eberhard Roloff 24 Aug '07

24 Aug '07

Eberhard Roloff wrote: > Ciro Iriarte wrote: >> 2007/7/25, Robert Smits <bob(a)rsmits.ca>: >>> On July 25, 2007 01:38:27 pm ianseeks wrote: >>>> On Wednesday 25 Jul 2007, Robert Smits wrote: >>>>> Some years ago I used my home gardening program, Key Home Gardener, which >>>>> was a 16 bit Windows program, to lay out my lot, my septic system, and my >>>>> landscaping. It produces files in a .drw format, which is a Microsoft >>>>> vector format. >>>>> >>>>> Is there any Linux based program that will allow me to view my .drw >>>>> files? >>>> Have you tried installing your program (if you still have the disks) under >>>> Wine on Linux? >>> Yes. Apparently there's enough difference with a 16 bit program (written for >>> Windows 3.1) not to install with CrossOver Linux. >>> >>> -- > >> Try with plain Wine. >> >> Ciro > > ...and before installing your application, execute "winecfg", where you > set your "Windos Version" to "Windows 95" > > regards > Eberhard ...furthermore, it is said, that word (ok, there is no Linux version of this, but at least it can be used with wine) can insert graphics that have been done as ".drw". Might be worth a try. However, seemingly a multitude of apps used to use the extenson ".drw". Needless to say there fileformats are sharing the same extension, but are nvertheless mostly incompatible to each other ;-). So I would definitely prefer to go the wine route with the original gardener program and see how this works out. regards Eberhard regards Eberhard -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Emerald theme, how to apply to gnome panel
by Hans Linux 24 Aug '07

24 Aug '07

anyone can tell me how to apply the selected emerald theme to gnome panel? the theme only applies on window. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Windowsserver supplying a home-dir on SuSE10.2
by Verner Kjærsgaard 23 Aug '07

23 Aug '07

Hi list, - I know (well, think) this can be done. - I've got a Wintendo file server that needs to supply the home-dirs of all users of a multiuser SuSE10.2 system. - let's not discus why...it's just so. Sigh. - the users are already authenticating against a Wintendo AD, works fine. - I simply forgot how to do... - Do I just (in /etc/fstab) mount or what? -- ------------------------------------------------------------------------- Med venlig hilsen/Best regards Verner Kjærsgaard -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 8

RE: [opensuse] Is something happing with the list
by James D. Parra 23 Aug '07

23 Aug '07

My replies are being rejected and I am not sure if my new messages are getting to the list. ~~~~~~~~ Maybe not. This one came through. I hope my reply makes it also. Regards, ~James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Is something happing with the list
by James D. Parra 23 Aug '07

23 Aug '07

My replies are being rejected and I am not sure if my new messages are getting to the list. Thanks, James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Wine for SuSE 10.2
by James D. Parra 23 Aug '07

23 Aug '07

Hello, While poking around in Yast I noticed the Wine package is not available. Is this so? Is there an rpm source for Wine for 10.2? It seems strange that it is not on the CDs Thanks for your help, James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Antivir keys opensuse 10.2
by Administrator 23 Aug '07

23 Aug '07

Hi, can anyone tell me how to get a new key (licence) for antivir on openSuSE 10.2? I've looked through the web site www.free-av.com and can't find anywhere where I can request or get a new free key for AV Classic for Linux or even a paid-for key for AV Premium for Linux. Can someone send me a current URL for the right page, please? Thanks David -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

Re: [opensuse] No ALT-F2
by Erik Jakobsen 23 Aug '07

23 Aug '07

David Salgado wrote: > Are you using Compiz or Beryl ? > Compiz and Beryl override this settings. > > > > Hi David. Yes I do. Thanks for your reply. -- Med venlig hilsen / Best regards Erik Jakobsen erik_ja(a)mail.tele.dk openSuSE 10.2 (i586) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] Intel wireless 4965AGN under 10.2 (repost)
by Jesse Shaver 23 Aug '07

23 Aug '07

I am trying to get the Intel wireless 4965AGN on my new thinkpad working under 10.2, but cannot get the module to compile. I get the following error: net/mac80211/ieee80211_sta.c: In function ???sta_process_csa???: net/mac80211/ieee80211_sta.c:2546: warning: format ???%d??? expects type ???int???, but argument 2 has type ???size_t??? CC [M] net/mac80211/ieee80211_iface.o CC [M] net/mac80211/ieee80211_rate.o CC [M] net/mac80211/michael.o CC [M] net/mac80211/regdomain.o CC [M] net/mac80211/tkip.o CC [M] net/mac80211/aes_ccm.o CC [M] net/mac80211/wme.o CC [M] net/mac80211/ieee80211_cfg.o CC [M] net/mac80211/ieee80211_led.o CC [M] net/mac80211/debugfs.o net/mac80211/debugfs.c: In function ???mac80211_open_file_generic???: net/mac80211/debugfs.c:28: error: ???struct inode??? has no member named ???i_private??? make[2]: *** [net/mac80211/debugfs.o] Error 1 make[1]: *** [net/mac80211] Error 2 make: *** [net] Error 2 Has anyone gotten this to work or have an idea on what to do here? Any help is apreciated. -Jesse -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] No ALT-F2
by Erik Jakobsen 23 Aug '07

23 Aug '07

Hi. The ALT-F2 has dissappeared here due to a reason I don't know. It's not the keyboard, as the CTRL-ALT-F2 works just fine. What could have happened ? -- Med venlig hilsen / Best regards Erik Jakobsen erik_ja(a)mail.tele.dk openSuSE 10.2 (i586) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Re: Who said Linux doesnot get Virus infections
by Joachim Schrod 23 Aug '07

23 Aug '07

John E. Perry wrote: > Joachim Schrod wrote: >> ... >> Let me propose another hilarious 5-step process: >> >> 1. Read the LWN.net security page. > > OK, so I did. > >> 2. Detect how many exploits are based on data files, and not >> on executables. just last week: ... > > Not a single exploit listed. Many vulnerabilities, almost all qualified > as "user-assisted" or "local. I wrote that they are local. That's what step 4 was for. User assisted is not relevant here, when these are exploits that are triggered by looking at images, or videos, or ads on web pages (the flash plugin exploit), or PDF files that are fetched from the Internet. Please note that exploits exists for most of these vulnerabilities, as described in the CVEs. Also, please note that exploits for similar vulnerabilities in the Windows world are actively used. Black hats don't attack Linux desktops on a large scale because they try to create large botnets with leveraged (distributed) C&C control, and there are not enough Linux desktops out there to make them a worthwile target. If Linux systems are really attacked, it is currently for specific targeting. But that's a matter of interest on the black hat's side, not a matter of missing vulnerabilities with existing exploits in deployed systems. When we do security and penetration tests at our customers, we can take over Linux boxes with 90% confidentiality. In 50% of the cases, something as simple as running metasploit is sufficient. But, as you can read from the other answers to my post, these results are obvioulsy dreamed by me and my customers pay for nothing, because "every linux/unix/*ix box on the planet is not owned by hackers and spammers while so many possible exploits exist", as Ken Jennings put it so succinctly. No, no, no. "Every ... is not owned" -- guys, now I've got it: There are *NO* owned Linux boxes out there, none at all. You read it here, so it's true. I should close down the part of my company that's testing and securing linux/unix systems for my customers; it's not necessary. Well, by public acclamation, I seem to be wrong, and rest my case. Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] Viewsonic VA2012 LCD monitor +Linux
by Art Fore 23 Aug '07

23 Aug '07

This monitor does not work with the DVI connector, only the analog VGA connector. After doing some research on the web, I found that when the DVI (Digital interface) is used with Linux or Solaris, it kills the DVI input circuitry. I am using Nvidia 7300 GT, but this has also happened with the ATI cards also. I was wondering if anyone else has had this problem and if there is a repair solution or any other solution other than just forgetting using the DVI connector? Art -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Root password for the OpenSuSE LiveCD 10.3 ?
by Eduardo J. Vega A 23 Aug '07

23 Aug '07

Hello guys any idea of which it's the root password for the OpenSuSE LiveCD 10.3 ? Thanks --ed -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

17 42

[opensuse] .kde/share/config/mediamanagerrc and mounting DVD
by Yuriy Lalym 23 Aug '07

23 Aug '07

To not touch all possible and impossible combinations for volume_label, for example: [/org/freedesktop/Hal/devices/volume_label___________________] mountpoint=/media/DVD uid=true utf8=true [/org/freedesktop/Hal/devices/volume_label___________________1] mountpoint=/media/DVD uid=true utf8=true [/org/freedesktop/Hal/devices/volume_label____________________] mountpoint=/media/DVD uid=true utf8=true How to write, that for any volume_label the point of mounting would be /media/DVD ? Thanks. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] VMware Player 2 & Kernel Modules Building Failure
by Andrei Verovski (aka MacGuru) 23 Aug '07

23 Aug '07

Hi ! I have SuSE 10.2 and: kernel-default-2.6.22.2-ccj52 VMware-player-2.0.0-45731.i386 + kernel sources and kernel syms 2.6.22.2-ccj52 installed. For unknown reason compilation of vmware kernel modules fails: Path to kernel sources requied to compile vmware modules seems to be correct: "/usr/src/linux-2.6.22.2-ccj52-obj/i386/default/include" Anyone have any idea what went wrong? ---------------------- make[1]: Entering directory `/usr/src/linux-2.6.22.2-ccj52-obj/i386/default' make -C ../../../linux-2.6.22.2-ccj52 O=../linux-2.6.22.2-ccj52-obj/i386/default modules CC [M] /tmp/vmware-config4/vmnet-only/driver.o CC [M] /tmp/vmware-config4/vmnet-only/hub.o CC [M] /tmp/vmware-config4/vmnet-only/userif.o /tmp/vmware-config4/vmnet-only/userif.c: In function ‘VNetCopyDatagramToUser’: /tmp/vmware-config4/vmnet-only/userif.c:630: error: ‘const struct sk_buff’ has no member named ‘h’ /tmp/vmware-config4/vmnet-only/userif.c:630: error: ‘const struct sk_buff’ has no member named ‘nh’ /tmp/vmware-config4/vmnet-only/userif.c:636: error: ‘const struct sk_buff’ has no member named ‘h’ make[4]: *** [/tmp/vmware-config4/vmnet-only/userif.o] Error 1 make[3]: *** [_module_/tmp/vmware-config4/vmnet-only] Error 2 make[2]: *** [modules] Error 2 make[1]: *** [modules] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.22.2-ccj52-obj/i386/default' make: *** [vmnet.ko] Error 2 make: Leaving directory `/tmp/vmware-config4/vmnet-only' Unable to build the vmnet module. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 7

[opensuse] Ext3 dir_index feature not available ?
by Bjoern Voigt 23 Aug '07

23 Aug '07

Hello, according to http://wiki.dovecot.org/MailboxFormat/Maildir I wanted to enable the "dir_index" feature for my EXT3 filesystems. The Wiki page describes, that "CONFIG_EXT3_INDEX=y" must be enabled in the Kernel. Unfortunately I can not found this option in openSUSE's default kernel and also not in the current vanilla kernel: $ grep CONFIG_EXT3_INDEX /boot/config-2.6.18.8-0.5-default \ /usr/src/linux-2.6.22.5/.config (nothing) But this option is references in fs/ext3/*: $ grep -Rl EXT3_INDEX /usr/src/linux-2.6.22.5/ /usr/src/linux-2.6.22.5/fs/cifs/cifspdu.h /usr/src/linux-2.6.22.5/fs/ext3/dir.c /usr/src/linux-2.6.22.5/fs/ext3/ialloc.c /usr/src/linux-2.6.22.5/fs/ext3/namei.c /usr/src/linux-2.6.22.5/include/linux/ext3_fs.h /usr/src/linux-2.6.22.5/include/linux/ext3_jbd.h I also could not find any dir_index related functions within the ext3.ko kernel module: $ nm /lib/modules/2.6.18.8-0.5-default/kernel/fs/ext3/ext3.ko | grep make_indexed_dir It seems to me, that the Kernel developers forgot to include the option "EXT3_INDEX" into /usr/src/linux-2.6.22.5/fs/Kconfig. Does anyone has experience with this issue? I wanted to double check this before filing a bug report. Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] 2007 Desktop Linux Survey results revealed
by Clayton 23 Aug '07

23 Aug '07

http://www.desktoplinux.com/news/NS8454912761.html This bit was particularly interesting: ---------------- It's also noteworthy that the SUSE Linuxes have taken a major step forward. In 2006's survey, the SUSE family came in a distant second place with only 13 percent of the user base. In terms of year-over-year growth, openSUSE and SLED were the real winners, in fact, with a jump of 8 percentage points. The Ubuntu family, by comparison, built on its lead by only 1.2 percent. --------------- C -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] resize or edit partition on opensuse 10.2
by Hans Linux 23 Aug '07

23 Aug '07

i hv /srv with 96GB, which i miscreated it when installing. it is supposed for /home since i usually save my data on my /home folder. is it ok to resize (edit) it using YaST Partitioner? any chance of losing all data? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

Re: [opensuse] Ext3 dir_index feature not available ?
by Bjoern Voigt 23 Aug '07

23 Aug '07

Sbs wrote: > You haven't said what OS version you are using. openSUSE 10.2 (32 Bit) with the latest updates. > AFAIK in opensuse 10.2 dir_index is not only included, it's enabled by > default during installation. My opensuse 10.2 box certainly uses it > (and I didn't have to select it). Yes, I also think, that YaST enables "dir_index" by default when formating a new partition. > Have you tried tune2fs -l /dev/hdaX (or tune2fs -l /dev/sdaX) to show > what filesystem features are enabled on your current Ext3 filesystem(s)? $ tune2fs -l /dev/hda8|grep features Filesystem features: has_journal ext_attr dir_index filetype needs_recovery sparse_super I have enabled "dir_index" on all my EXT3 filesystems and also checked them with "e2fsck -f /dev/hdaX". > Have you tried creating an Ext3 filesystem with mkfs.ext3 -O > dir_index? What happens? No, not yet. But I can do this now: $ dd if=/dev/zero of=/tmp/testimage bs=1024 count=1000 1000+0 records in 1000+0 records out 1024000 bytes (1.0 MB) copied, 0.0129658 s, 79.0 MB/s $ mke2fs -j -O dir_index /tmp/testimage mke2fs 1.39 (29-May-2006) /tmp/testimage is not a block special device. Proceed anyway? (y,n) y [...everything ok...] But I think, tune2fs, e2fsck, mke2fs and other e2fsprogs commands do not depend on the Kernel option "CONFIG_EXT3_INDEX". If this option is not enabled, everything seems to work fine, but the directory indexes are not updated by the Kernel anyway. Is there a way of testing, if the directory indexes are updated by the Kernel? Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Why do I get this back all the time..
by Verner Kjærsgaard 23 Aug '07

23 Aug '07

A couple of minutes ago, I started receiving LOTS of emails back from a server. All my postings over the last 10 days or so to this list are coming back...like this one: --------------------------- Undelivered Mail Returned to Sender Fra: Mail Delivery System <MAILER-DAEMON(a)linux02.gaup.name> Til: vk(a)os-academy.dk This is the Postfix program at host linux02.gaup.name. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to <postmaster> If you do so, please include this problem report. You can delete your own text from the attached returned message. The Postfix program <mofasa(a)linux02.gaup.name> (expanded from <mofasa@localhost>): Host or domain name not found. Name service error for name=localhost type=AAAA: Host not found ------------------------------- In fact, I just got my posting "Windows server supplying...." back right now. And, at the same time, I see it posted perfectly fine on this list. I really don't understand what's happening here? -- ------------------------------------------------------------------------- Med venlig hilsen/Best regards Verner Kjærsgaard -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

7 8

Re: [opensuse] Recover data from external harddisk
by Rajko M. 23 Aug '07

23 Aug '07

On Wednesday 22 August 2007 09:04:52 pm Hans wrote: > looks like that's for ext2 only. is it also work for ext3? > > Rajko M. wrote: > > On Wednesday 22 August 2007 08:26:57 pm Hans wrote: > >> yesterday i accidentally delete some data on my fujitsu external > >> harddsik. It is an ext3 format disk. Is there any program to recover the > >> data back? free if possible :P > > > > In short this should be description > > http://www.stud.tu-ilmenau.de/~mojo/undelete.html > > the e2fsprogs should be in openSUSE software repositories. > > > > A bit old: > > http://www.tldp.org/HOWTO/Ext2fs-Undeletion.html It is late here, so just pointers. It is very similar. Basically ext2 + journal + few new functions = ext3. Turn off journal and it is almost ext2. You can search: http://lists.opensuse.org for "undelete ext3" and there will be a lot of hits. Basic is until you find out how to do that keep your external disk off line. There is also in Midnight Commander, in menu Command "Undelete files (ext2fs only)", I guess it uses undelete from e2fsprogs. -- Regards, Rajko. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Recover data from external harddisk
by Hans 23 Aug '07

23 Aug '07

yesterday i accidentally delete some data on my fujitsu external harddsik. It is an ext3 format disk. Is there any program to recover the data back? free if possible :P -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Re: Who said Linux doesnot get Virus infections
by Joachim Schrod 23 Aug '07

23 Aug '07

Sloan wrote: > > It seems to be essentially one of the "honor system" viruses for unix, > you know the drill: > > 1. download the hostile executable > 2. save the save the hostile executable somewhere appropriate > 3. change the file mode to make it executable. > 4. execute it with the command ./<filename> > 5. hilarity ensues (or not) Let me propose another hilarious 5-step process: 1. Read the LWN.net security page. 2. Detect how many exploits are based on data files, and not on executables. just last week: pax, hdr file format, squirrelmail (read an email), xvid (look at a video), clamav (DoS attack), gpdf, firefox (too many bugs to enumerate), flash plugin, libgd (used in many applications), gimp, imlib2 (image loading), libvorbis, openoffice, xine (again, videos are cool), xpdf. 3. Stop feeling so smug. 4. Follow other exploit publications, security pages, and security mailing lists; detect how many privledge escalation exploits are out there. Understand that they can be triggered by remote exploits from step 2. 5. Start feeling numb when you read all the dumb posts in this thread that focus on executable programs that the user must run (because this is the prominent attack vector on Windows). It depends on your intelligence if you need to follow this through to the end or if you realize soon enough that from "downloading and running executables is not a relevant attack vector for Linux" does *NOT* follow "Linux is safe". In math, this is called the difference between equivalence and implication. Hmm, no, sorry; your post was not hilarious. It was not even funny. You didn't thought it was insightful, did you? Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

7 7

[opensuse] GConf schema installer error, battery_low_percentage cannot be zero
by Hans 22 Aug '07

22 Aug '07

When I try to add a new panel to GNOME, it was failed. I forgot the error message. After restart, the gnome panel is gone, and this error keep showing up : GConf schema installer error, battery_low_percentage cannot be zero How do I fix it to get my gnome panel back? I hv googled and try this command but also failed : export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source` gconftool-2 --makefile-install-rule /etc/opt/gnome/gconf/schemas/gnome-power-manager.schemas kill -HUP gconfd-2 which file should I edit? thx for any help -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] printing emails with loooooong lines from kmail ...
by Daniel Bauer 22 Aug '07

22 Aug '07

Hello, When printing an email that contains a very long line (an URL) the whole email gets scaled, so that the long line fits on the paper - thus makes the printout unreadable. any idea how/where I can set that when printing such long-lined-emails the line gets splittet into several lines? as an example: try to print this e-mail from kmail (URL below to show such a long line and its effect) http://localhost/nowhere/this_is_just_a_sample_to_show_a_very_long_line/tha… thanks for your hints Daniel -- Daniel Bauer photographer Basel Switzerland professional photography: http://www.daniel-bauer.com erotic art photos: http://www.bauer-nudes.com/en/linux.html Madagascar special: http://www.fotograf-basel.ch/madagascar/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] Which DELL Notebooks work 100% with OpenSUSE 10.2?
by LLLActive＠GMX.Net 22 Aug '07

22 Aug '07

Hi all, which DELL Notebooks work 100% with OpenSUSE 10.2? I know DELL has some it even delivers without OS (eg. Latitude D830 at the same price with or without OS), but they are of the upper price range. I need a notebook below 1000$ (about 750 Euro) that can be used for everything, but no need for demanding software like games that use extensive graphics. Anyone who uses DELL notebooks with OpenSUSE 10.2 successfully? :-) Al -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

10 23

[opensuse] Hard drive problem after suspend to disk
by Theo Wollenleben 22 Aug '07

22 Aug '07

I have a problem with suspend to disk after a kernel update under SUSE 10.1. Using kernel-default-2.6.16.13-4 there is no problem with my hard drive. With the updated kernel version 2.6.16.21-0.13 and all following versions (including 2.6.16.27-989.2 from the Build Service) loading of the boot loader and the linux kernel is very slow while resuming after suspend to disk. This seems to be a hard drive problem which also appeared on my system after a system freeze (where the operating system couldn't access the hard disk properly). Could it be that suspend to disk with the updated kernel leaves the hard drive in some improper state? Is there a solution to the problem? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 7

[opensuse] System Update to 2.6.22.2-ccj52-default : Bash/Konqueror lost opensuse"ness"
by David C. Rankin 22 Aug '07

22 Aug '07

Jan, all: After a complete system update to 2.6.22.2-ccj52-default on my Toshiba P35 using "system update" in Yast, I have noticed some other strange behavior and my system has lost a lot of what makes opensuse opensuse or, in other words, its opensuseness. For starters: (1) konsole now has the regular user prompt: "20:58 Rankin-P35a:~ >" where "Rankin-P35a" is displayed in *green* and the ">" is *not* visible. The ">" is not visible because the font color for the ">" is white regardless of schema. See below (4) for further discussion; (2) konsole now has the root user prompt: "20:58 Rankin-P35a:~ #" where "Rankin-P35a" is displayed in *red*; (3) all/most of the Bash aliases are gone, (i.e. "ll" does not give a long list of the directory, etc...) example: 21:11 Rankin-P35a:~ > ll bash: ll: command not found 21:12 Rankin-P35a:~ > la bash: la: command not found; and (4) konsole: links are invisible. For example in "lrwxrwxrwx 1 root root 19 2007-08-06 23:02 powersave -> sysconfig/powersave" the first "powersave" is invisible. Actually, the link name font color is set to white making it invisible on a white background. The invisibility occurs in schema "konsole default", "white on black", etc. The link name color shows as white regardless of the schema selected, "linux colors", etc. How do I get konsole and the Bash aliases returned to normal without having to manually rebuild the aliases and find out where all the konsole default color definitions are found?? I have another 10.2 machine here I could copy the files from, but I do not know offhand which files I need. .bashrc comes to mind, but I would certainly welcome a link to a quick list of files that I could start off replacing to attempt to cure these problems. Any help would be greatly appreciated.

4 6

[opensuse] Can't access CDDB Data - sometimes...
by Don Raboud 22 Aug '07

22 Aug '07

Hi all, I am trying to rip audio CD's to flac using konqueror's audiocd:/ feature. When doing so, there is no CDDB information shown, just Track01, Track02, etc. This used to work in 9.3 or 10.1 (I forget which I used to do this before) but now I only have 10.2 running here. On one of my computers Amarok CAN access the CDDB information, so it seems to be available (Amarok is currently set to access freedb.freedb.org using port 8880). On the other Amarok can't access the information, but I that is a problem to be solved later). Does anyone here know how to get konqueror to access this CDDB information? Alternatively, is there a better/alternate way to do this ripping which will incorporate the CDDB information. Thanks. -- Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] Unable to connect to internet in China
by Jacky Woo 22 Aug '07

22 Aug '07

Hello guy, I'm now in China and is now using LAN in my flat instead of ADSL. My OS is openSuSE 10.2 (KDE) and my default internet explorer is Firefox. But when I tried to connect to internet, it alwasy failed and a page with words in Chinese like "Unable to connect. Only IE is accessible" appeared. My current ISP is China Telecom. So I'm calling for help. Is there any Chinese who has fixed it? Or anyone who was once in China made it happen? I'm very grateful if you can help. Jacky -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] PCMCIA fax modem card install
by Constant Brouerius van Nidek 22 Aug '07

22 Aug '07

Have a older thinkpad with an internal softmodem. Still working on a working driver but in the meantime i would like to use my PCMCIA Thinfax modem. This modem I still use regularly with my HP200LX palmtop. The modem seems to be recognized but I have no idea how I can address the PCMCIA modem in my 10.2 laptop. Read a lot about the new PCMCIA card setup but that did not help me much. Somebody can help me out? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] hosts file and Yast
by Koenraad Lelong 22 Aug '07

22 Aug '07

Hi, I have a stupid application that reads /etc/hosts and uses the IP-address where an alias is placed as the address to listen for requests. This is fine when there is only one IP-address on the machine. My server has two net-cards and thus two IP-addresses. One goes to the Internet, the other to the internal net. Unfortunately, everytime I change something in the network-card configuration the external IP-address gets the alias. That's not what I want. If I edit hosts to be like this : ... 192.168.0.1 box1.local.net box1 192.168.1.1 box1.local.net If I change something in the network-card configuration with Yast, hosts ends up like this : ... 192.168.0.1 box1.local.net 192.168.1.1 box1.local.net box1 Is there a way to tell Yast to give the alias to the internal address ? I use Suse 10.2 B.T.W. I hope this makes sense. Thanks for any help you could provide. -- Met vriendelijke groeten, Koenraad Lelong R&D Manager ACE electronics n.v. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Xen issues
by Mohammad Bhuyan 22 Aug '07

22 Aug '07

Hi all, I have installed Xen VM server using Yast to my OpenSUSE 10.2. Then made the Xen kernel as default for GRUB boot. As shown in - http://en.opensuse.org/How_to_Install_a_Xen_VM_Server (Din't play with GRUB boot loader file) When I boot to the Xen VM Server, 1. The text messages during boot are larger and wraps to next line in the screen. This doesn't happen with my standard OpenSUSe 10.2 boot. 2. Once loggend in (KDE) my network connections are not working. Did su but networks restart fails saying permission denined?!!? Regards, Soyuz -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 3

[opensuse] Re: Is it possible to edit and save PDF forms?
by Joachim Schrod 22 Aug '07

22 Aug '07

Kai Ponte wrote: > > AFAIK, the only product which will actually save the form data along > with the form is the Wintendo version of Acrobat Professional. > > Though I've gotten in and edited PDF data I've yet to actually save it > in a form using *nix. > > Want to write something? :p If anybody is writing "something", he or she should have a look at pdftk. This can fill in forms and can save them. It is a command-line tool and not a viewer, though, and therefore no solution for Carlos' problem. But it is an application where one can get open-sourced code for that problem. Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 8

[opensuse] kernel: general protection fault: 0000
by Vinzenz Bargsten 22 Aug '07

22 Aug '07

hi, i am running a suse linux 9.3 x86_64 maschine with kernel version 2.6.11 (from package). my problem is that it sometimes locks up, where sometimes means it can be occur between 24h or several weeks. i even thought it was gone after changing some hardware (hdd, power supply) because it didnt occur for a while, but it did now on 2 following days. it is also possible that these lockups are not the same, meaning this maybe is a new problem. (one backup hdd was really broken and causing problems) the maschine does not respond to any input then und nothing is in the syslog. yesterday i got a message when i was logged in via ssh on console which said: kernel: general protection fault: 0000 connection was lost then. this reminds me of the win98 generic exception ;) i really want to know a bit more precisely what the problem is, especially if it is a software or hardware problem. what are the actual debugging options, opinions, recommendations? yours vb -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] GConf schema installer error, battery_low_percentage cannot be zero
by Hans 22 Aug '07

22 Aug '07

When I try to add a new panel to GNOME, it was failed. I forgot the error message. After restart, the gnome panel is gone, and this error keep showing up : GConf schema installer error, battery_low_percentage cannot be zero How do I fix it to get my gnome panel back? I hv googled and try this command but also failed : export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source` gconftool-2 --makefile-install-rule /etc/opt/gnome/gconf/schemas/gnome-power-manager.schemas kill -HUP gconfd-2 which file should I edit? thx for any help -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] System Update to 2.6.22.2-ccj52-default Killed Atheros Wireless
by David C. Rankin 22 Aug '07

22 Aug '07

Jan Engelhardt wrote: >> Thanks Jan, >> >> I'm practicing patients today.... Actually, the ability to wait >> comfortably is a practiced art... > > It should have popped up on the ftp by now. Please try. > > > Jan Jan, My patients has paid off. The mad-wifi module works perfectly. The modules load without problems: 18:46 Rankin-P35a:/home/david/Documents # lsmod | grep ath ath_rate_sample 17024 1 ath_pci 101024 0 wlan 209092 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 195664 3 ath_rate_sample,ath_pci However, I do have a few questions about the 2.6.22 mad-wifi setup. First, in Yast I now have *2* drivers each for eth0 and wireless. For the wireless device, there are two entries of: AR5212 802.11abg NIC and, Yast will not let me delete either one. The only difference between the two is that one says: Device Name: wlan-bus-pci-0000:02.02.0 while the other one says: Device Name: wlan-id-00:11:f5:15:2d:83 Normal?? Additionally iwconfig returns the following warning: 16:30 Rankin-P35a:/home/david # iwconfig wifi0 no wireless extensions. Warning: Driver for device ath0 has been compiled with version 22 of Wireless Extension, while this program supports up to version 21. Some things may be broken... ath0 IEEE 802.11g ESSID:"rbpllc" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: 00:12:17:04:9C:CC Bit Rate:54 Mb/s Tx-Power:16 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Encryption key:D139-1CD5-B452-5766-528F-BC00-E206-BF1E Security mode:restricted Power Management:off Link Quality=45/70 Signal level=-49 dBm Noise level=-94 dBm Rx invalid nwid:9859 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Like I said before, it is working wonderfully and showing better signal strength than before. So I'm not too concerned about the warning. Thank you very much for building the driver and saving me the grief of a downgrade. There are a few more quirks, but I will start a fresh thread.

2 2

Re: [opensuse] my clock keep changing
by Carlos E. R. 22 Aug '07

22 Aug '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 El 2007-08-20 a las 16:43 +0700, Hans Linux escribió: > Carlos E. R. wrote: > > Known problem. Procedure: > ... > Perfect, it works! Thx :) Welcome! :-) - -- Saludos Carlos E.R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGy4sttTMYHG2NR9URAqnCAKCW51fjcjsqkclEileEYruPRsFR4ACbBFn8 v/MyZaR7k5EsHq6FFElrYng= =TcN4 -----END PGP SIGNATURE-----

1 0

[opensuse] Re: Is it possible to edit and save PDF forms?
by Joachim Schrod 22 Aug '07

22 Aug '07

Carlos E. R. wrote: >> If anybody is writing "something", he or she should have a look at pdftk. This >> can fill in forms and can save them. > > I did look at it. > >> It is a command-line tool and not a viewer, though, and therefore no solution >> for Carlos' problem. But it is an application where one can get open-sourced >> code for that problem. > > It has options to change the permissions a pdf file. But even > using "allow AllFeatures", the user of acroread is denied access to save > the file or annotate or any of those things. I tried. As I wrote, pdftk is not a solution to your problem. You look for a viewer and pdftk is not a viewer. It was a hint for persons that want to work on PDF viewers. pdftk has a fill_form operation that "fills the single input PDF's form fields with the data from an FDF file or stdin." Also relevant is the dump_data operation (that tells which form fields are in a PDF file) and the flatten operation (that "merges an input PDF's interactive form fields (and their data) with the PDF's pages.") These are NOT the permission changes that you mentioned, this is a different functionality. Btw, allowing PDF annotations with acroread are a whole different matter whatsoever. No open source tool is known to me that allows that -- AFAIK, one needs to digitally sign the file with a key from Adobe for that. What means that the difficulties are very high to achieve that functionality. Lastly, in case, that this was too implicit: I follow the PDF tool landscape closely, and, to my knowledge, there is no PDF viewer on Linux that does what you want. Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Prevent applications from stealing focus in Gnome
by Clayton 22 Aug '07

22 Aug '07

The more I work with Gnome, the more annoyed with it I become. In KDE, there is a config setting where you can tell it to prevent applications from stealing focus. Is there anything at all in Gnome that is similar? I start up applications in Gnome, and continue working on/in another application (eg a document or an email)... when the app I started finally surfaces, it steals the focus and I end up typing a whack of stuff into the new application. I guess I am too impatient. In KDE I can set it to start apps in the background and it works perfectly. I have yet to find such a setting in this Gnome thing. Any suggestions? Or this yet another feature that was removed from Gnome? C. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 8

[opensuse] System Guard (or like) Reports
by Kai Ponte 21 Aug '07

21 Aug '07

I was trying to watch a process to see how a particular application (one I'm writing in Java) is performing over time. In Windows NT (XP/2K/2K3) there is a tool (perfmon) I can use to track system memory, processor, disk I/O, and other items. I can also write values out to a log for future analysis. I know there is KDE system guard. I've looked and found a nice article from the now-defunct TuxMagazine (http://www.tuxmagazine.com/node/1000153) but nothing more interesting. What can I use to measure system performance and write it out to some form of file. I'd like to import the file in a apreadsheet for example. TIA! -- kai ponte www.perfectreign.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 5

[opensuse] Trying to resolve a dependency.
by Darragh 21 Aug '07

21 Aug '07

Hello all, I'm trying to install a package that depends on libasound.so.2. It is expecting it to be in /lib however in SuSE it is located in /usr/lib/ In /usr/lib there are three libraries that look like this: Libasound.so Libasound.so.2 Libasound.so.2.0.0 I've tried making sim links to these in /lib/ but still the rpm will not install. I've even tried copying the libraries over to that directory but no change. Do any of you have any suggestions as to where I'm going wrong with this? Thanks Darragh -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] guru url
by jdd 21 Aug '07

21 Aug '07

each time I try to install a guru packages, I have a error "package not found" on this URL: http://ftp.gwdg.de/pub/linux/misc/suser-guru/rpm/10.1/ what is worng? I have no error message in the configure upadte part (and this is 10.1, not very fast on this respect, not ideal to tests :-) thanbks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] reiser and ext3 confusion
by primm 21 Aug '07

21 Aug '07

I upgraded some lan clients to 10.2. I notice that new installs use ext3. Is the latter better? Faster? Is there a problem with reiser? Why did suse change it? My nfs server is cli 7.2 with ext2. Is it wise to export nfs between differing filesystems? Or can I assume that if it isn't broke then don't fix it? Cheers, Steve. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 14

[opensuse] printing simultaneously to several printers (was: Re: drucken auf mehrere Drucker)]
by Eberhard Roloff 21 Aug '07

21 Aug '07

Johannes Meixner wrote: > Hallo, > > On Aug 21 08:28 Daniel Gompf wrote (shortened): >> ich muss aus Zwecken der Archivierung alle Dokumente die auf einem >> bestimmten Drucker gedruckt werden gleichzeitig noch in einer Datei >> (am besten tif, kann aber auch gerne ps sein) ablegen. > > http://www.pykota.com/software/tea4cups/ > > Gruß > Johannes Meixner Hi, this is great indeed! Tahnks much for your information and link, Johannes. Even the fee of $/€25 imho seems to be more than reasonable in comparison to what you get. Since not anyone on this list might speak german, please allow me to translate. Sorry for my bad english. begin of translation Hi, On Aug 21 08:28 Daniel Gompf wrote (shortened): in order to do document archiving, I need to have all documents that are sent to a specific printer simultaneously being converteed to a file (best would be tif, ps is also acceptable) answer from Johannes Meixner: http://www.pykota.com/software/tea4cups/ regards Johannes Meixner end of translation kind regards and thanks again Eberhard -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] System Update to 2.6.22.2-ccj52-default Killed Atheros Wireless
by David C. Rankin 21 Aug '07

21 Aug '07

Hello All, In one of my less brilliant moves, I thought I would try "system update" in Yast on 10.2 on my Toshiba P35 laptop. The kernel was updated to 2.6.22.2-ccj52-default. The first major problem is that the updated kernel will not load the atheros mad-wifi driver. The kernel module is still there under /lib/modules/2.6.18.8-0.3-default/updates/ath/ath_pci.ko but does not exist under 2.6.22.2-ccj52-default. Yast shows mad-wifi installed, but the ath_pci.ko module cannot be loaded with either modprobe or insmod: 10:25 Rankin-P35a:/home/david # modprobe ath_pci FATAL: Module ath_pci not found. 10:25 Rankin-P35a:/home/david # insmod /lib/modules/2.6.18.8-0.3-default/updates/ath/ath_pci.ko insmod: error inserting '/lib/modules/2.6.18.8-0.3-default/updates/ath/ath_pci.ko': -1 Invalid module format Is there anything short of downgrading the kernel that may fix the problem. If not, does anybody have a good link to a howto for downgrading the kernel or should I just blow away this install and start over???

3 3

[opensuse] drucken auf mehrere Drucker
by Daniel Gompf 21 Aug '07

21 Aug '07

Hallo, ich muss aus Zwecken der Archivierung alle Dokumente die auf einem bestimmten Drucker gedruckt werden gleichzeitig noch in einer Datei (am besten tif, kann aber auch gerne ps sein) ablegen. Jetzt fehlt mir die Idee wie ich die Druckausgabe gleichzeitig auf 2 Drucker bekomme. Danke Daniel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

Re: [opensuse] Suse 10.3 Beta1 +Compiz-fusion (Solved)
by Art Fore 21 Aug '07

21 Aug '07

I got compiz-fusion running on both 10.3 and 10.2 X68-64 dual core and without xgl. It was a 4 day battle, but I won in the end. Here is what I did. 10.2 I pretty much followed http://www.benkevan.com/blog/?p=66, which did not work completely.. Then I changed the repository to http://download.opensuse.org/repositories/xorg73/openSUSE_10.2, upgraded the compiz-fusion, xorg, & mesa rpms. (These had all been upgraded before but the 7.3 repository had slightly later versions). The copoy/paste of #! /bin/sh compiz –replace ccp & emerald –replace ccp & from http://www.benkevan.com/blog/?p=65 did not work right. Ended up I had to change the - to --. I also added the nvidia repository and had already installed the invidia kernel drivers previously. 10.3 First, adding the 10.2 nvidia repository did not work. I would not recognize the drivers as they were for the wrong version of kernel. I downloaded the NVIDIA-Linux-x86_64-100.14.11-pkg2.run and ran it with the -q option. The -q is a must. Ended up that I needed to do this again after I updated xorg for some reason or another, so you might want to do this last. Used the XGL:/X11 repositories first, the the xorg73 repositories. in Yast. Most of the packages were not upgraded, even though they were in the repositories. I ended up downloding those that did not upgrade and installed them manually. If fact, I had to get the emerald-themes from the suse 10.2 repositoy. Hopefully by the time 10.3 is released, this will all get straightened out, otherwise, it is really a big hassle. As far as the nvidia-config line from http://www.benkevan.com/blog/?p=65, again another copy paste error on the -, but it still did not work. Unrecognized --compite etc. Ended up I had to do each option individually, then it worked. my xorg config added lines are as follows: Under screen Section "Screen" Identifier "Screen[0]" Device "Device[0]" Monitor "Monitor[0]" DefaultDepth 24 Option "AllowGLXWithComposite" "True" Option "RenderAccel" "True" Option "AddARGBGLXVisuals" "True" SubSection "Display" and at the end Section "Extensions" Option "Composite" "Enable" EndSection Compiz is much faster and the compiz setting application is very nice. Have to play around with all of the plug-ins and see what I really want to use. Both CPUs are running 4 to 6 %. If I rotate the cube, etc., 1 cpu will jump up to about 16% for only a short time while I am rotating the cube. Now I will have to install this on my laptop at work where I have WinXP running under parallels on Suse 10.2. Hopefully parallels will work with it as I do max out the 2 cpus on it quite often with a simulation program that only runs under winxp. Thanks to all that helped on the mail list. Art -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 5

[opensuse] USB recognition
by Constant Brouerius van Nidek 21 Aug '07

21 Aug '07

Strange but with some usb units attached to my 10.2 running computer, some of the attachments are readily seen and can be used right away. My usb memory stick does not stir any activity but if I use my cardreader with one of the slots occupied it give me the well known choices. What is the cause of this phenomena? How to get recognition every time? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 4

[opensuse] some sed-help, please
by Leen de Braal 21 Aug '07

21 Aug '07

Hi all, Need some help with sed: I have a txt file that contains some 15000 lines, where i want to bring in some structure. First is to replace the first (only the first) space in the line with a <TAB>. After that I want to delete a given number of characters that always begin with the same sequence, but may have different contents. Beginning is always the same, and length to delete is also always the same. I used sed 's/^ /\t/' txtfile, but I do not get a tab. Besides, this might do more then just the first space, I guess. Could someone shed some more light here? -- L. de Braal BraHa Systems NL - Terneuzen T +31 115 649333 F +31 115 649444 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] Hack-week - integrated solution for directory based auth
by Leo Eraly 21 Aug '07

21 Aug '07

Hi, What is the current status of this project: http://idea.opensuse.org/content/ideas/create-a-properly-integrated-solutio… Are there still people working on it? I think it's a gread idea which can be useful in a lot of environments. Kind regards, Leo -- Leo Eraly <leo at unstable dot be> -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Shutting down ZENworks Management failed
by Sergey Mkrtchyan 21 Aug '07

21 Aug '07

Hey guys, After a fresh install of 10.2 and updates through YaST online update I still have the problems with updating. 1. There are two guys who manage updating, openSUSE updater Applet and Software Update(blue globe), I guess they both do the same job, don't they? So which one I should use? Is it dependent only on my preference? 2. the "blue globe" keeps saying that ZMD is not running(tried restarting, during of which Shutting down ZENworks Management gives failed), though I have biophystheory:/home/Floyd # rczmd status Checking for ZENworks Management Daemon: running usually when I do, it goes like biophystheory:/home/Floyd # rczmd restart Shutting down ZENworks Management Daemon failed Starting ZENworks Management Daemon done and nothing changes, but even when it gives done, some NUllReference Error occurs from that blue globe updater and it closes... Anybody else is having this? Sergey -- Sergey Mkrtchyan PhD Student @ Department of Physics & Astronomy, Faculty of Science, University of Waterloo -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 6

[opensuse] A few dependency questions.
by Darragh Ó Héiligh 21 Aug '07

21 Aug '07

Hello all, I've SuSE 10.2 installed here and I'm having a few issues with dependencies. Perhaps someone could point me in the right direction for these libraries? I did find an rpm for libasound from GWDG.be but that was incompatible with the installed version of Alsa. Any suggestions welcome. error: Failed dependencies: /lib/libasound.so.2 libibmeci.so rtld(GNU_HASH) Thanks Darragh -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

Re: [opensuse] No cd/dvd after kde update
by Yavor Ivanov 20 Aug '07

20 Aug '07

I`ve fixed my problem now. Here is what I did: i reinstalled my suse this time including only the oss, non-oss and update repos. Now everything is working. I just think this is the easiest way. Thanks all :) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Anyone ??? SIPfoundry sipX/sipXecs
by Andrei Verovski (aka MacGuru) 20 Aug '07

20 Aug '07

Hi ! Anyone using this software on SuSE? Any feedback is greatly appreciated. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] arts 1.5.7*
by Carl Hartung 20 Aug '07

20 Aug '07

Hi Everybody, I decided to take kexi for a spin after seeing it mentioned in another post here. Now I seem to be running around in circles looking for an 'arts' >= 1.5.7 suitable for 32 bit x86 openSUSE 10.2 Is this presently in the backporting pipeline, or are my software searching skills getting rusty? TIA & regards, Carl -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 7

[opensuse] wifi package namig
by jdd 20 Aug '07

20 Aug '07

just a note: why is is necessary to search for "wlan" to fins the "wifi" utilities? jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] configuring a wifi accessory
by jdd 20 Aug '07

20 Aug '07

Hello, I have no idea of how one can configure a wifi part in opensuse 10.1 (there is no yast wifi module AFAIK) details (in french, but the dmesg is the same :-) here: http://www.dodin.org/pmwiki/pmwiki.php/Main/HPWirelessPrintKit I find this: http://rtl8180-sa2400.sourceforge.net/ but don't know nothing about it. I have no time right now for kernel compilation :-( - If necessary I can wait for 10.3 final (but any hint for 10.3 beta 1 would also be good) the part is only a print server. It can be used as network wifi dongle but is not necessary right now. thanks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0