In openSUSE 15.1, memtest, as installed, would not work with UEFI. Has
this been fixed in 15.2? There is a version on the memtest website that
will work with it.
tnx jk
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
SuSE Tumbleweed with newest updates and upgrades.
5.7.1-1-default #1 SMP Wed Jun 10 11:53:46 UTC 2020 (6a549f6) x86_64 x86_64
x86_64 GNU/Linux
Just recently started to give error messages when plugging in e.g. USB Headsets,
Arduino Uno into some Exsys USB 3.0 hub.
This was working fine in Tumbleweed before and in e.g. SuSE 13.1.
The error message is e.g.:
[...]usb 2-1.4.3: new full-speed USB device number 10 using xhci_hcd
[...]usb 2-1.4.3: New USB device found, idVendor=2341, idProduct=0043,
bcdDevice= 0.01
[...]usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[...]usb 2-1.4.3: Manufacturer: Arduino (www.arduino.cc)
...serialnumber...
[...]kernel: usb 2-1.4.3: Not enough bandwidth for new device state.
[...]kernel: usb 2-1.4.3: can't set config #1, error -28
This error message started on Jun 04, after making an
update (zypper up) on June 3rd.
A USB3.0 stick is working on the Exsys Hub.
The Arduino is working on some other USB 3.0 Port of another hub.
Regression?
Any hints how to get this away?
Found only another occurrence of this bug:
http://opensuse92.rssing.com/chan-20813128/all_p1407.html
Best regards
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
I usually take the newest openSUSE kernel (from repository
Kernel_stable). But since some month I have a DVB T2 HD card, which
requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171).
So I need to compile kernels myself. I have a working compilation path.
But the current path has 12 steps! It takes some time. I wonder, why it
is so complicated to configure, compile and install a Kernel under openSUSE.
Is there a better/easier/automated way to configure, compile and install
a Kernel under openSUSE?
I know this blog article. But the article uses Vanilla kernels and also
needs 6 steps. With additional patches (4 steps), third-party modules (2
steps) and cleanup (1 step) the article would also need 13 steps:
Compiling the Linux Kernel, the SUSE way
https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/
This is my Kernel configuration, compilation and installation path:
1. Update kernel-source and kernel-default from Kernel_stable repository
2. Save kernel-source: cp -a /usr/src/linux-4.x.y-...
/usr/src/linux-4.x.y-my
3. Apply my patches
cd /usr/src/linux-4.x.y-my
patch -b -p1 < ~myuser/.../my-kernel-patch.patch
4. Copy standard configuration:
cd /usr/src/linux-4.x.y-my
cp -v /boot/config-4.11.4-1.gcba98ee-default .config
5. Edit .config:
remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT
remove some hardware-dependent settings
6. edit configuration interactively:
Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise
"make binrpm-pkg" creates huge kernel binaries.
make oldconfig
[...]
Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1
*
* Configure standard kernel features (expert users)
*
Configure standard kernel features (expert users) (EXPERT) [N/y/?]
(NEW)
Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW)
make menuconfig
Do some additional configuration.
7. Compile kernel
(-j4 for four processor cores, ionice and nice to reduce the load,
binrpm-pkg for RPM without source-RPM)
make clean
nice ionice -c idle make -j4 binrpm-pkg
8. Install the kernel RPM package
rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm
9. Install necessary symbolic links for "dkms"
cd /lib/modules/4.x.y-my1
ln -sv /usr/src/linux-4.x.y-my source
ln -sv /usr/src/linux-4.x.y-my build
10. Update third-party modules (e.g. Nvidia driver):
dkms install -m nvidia -v 375.66 -k 4.x.y-my1
11. Cleanup
cd /usr/src/linux-4.x.y-my
make clean
12. Select Grub configuration and reboot
grub2-once --list | less
grub2-once 2
reboot
Greetings,
Björn
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
On Wednesday 03 July 2002 03:38, Michael wrote:
> I tried to visit this site.
> http://www.bet365.com
> The result upset me so much i sent them this.
I sent the letter below, and I encourage everyone on the list to send a
similar letter.
-----------------------------------------
Subject: Create a Real Web Site Please
From: Bryan S. Tyson <bryantyson(a)earthlink.net>
To: webmaster(a)bet365.com
When attempting to view your site using Konqueror 2.2.1 and Mozilla
0.9.4, both Linux web browsers, I was curtly informed that my browser
is "incompatible." Your site, sir, is what is "incompatible." Stick
with established standards and real html, not Microsoft proprietary
"features."
***************************************************
Powered by SuSE Linux 7.3 Professional
KDE 2.2.1 KMail 1.3.1
This is a Microsoft-free computer
Bryan S. Tyson
bryantyson(a)earthlink.net
***************************************************
We have an winNT server and need to auto mount a shared folder as if it were a
windose mapped drive Z: on SuSE8
Could someone please explain how to do this and how to make sure it is set-up
for every user everytime the system is booted.
Thanks
Regards
Keith Jacobs
New to Linux
Hello,
I got Tumbleweed Snapshot20210115 and wanted to install it on a rather old machine with a
software raid1 (UEFI raid).
On this raid some Windows 10 is already existing.
The installer of Tumbleweed Snapshot20210115 does not recognize this software raid1.
It only shows single harddiscs and no raid volume.
An older snapshot 20190704 is able to see that software raid1 but I cannot do any zypper
dup with that one
(this version was running previously before some hardware crash).
Any help for that - either a snapshot which can handle software raid1 or some way to set
zypper dup running again
with the older snapshot?
BR and thanks in advance
Markus
Greetings,
Just did an upgrade from my stable Leap 15.1 install to 15.2. I
downloaded the DVD and did the upgrade from booting that. It asked me if
I wanted to used the online repos as I have an internet connection so I
said OK. Everything seemed to go well and booting into my KDE desktop.
But clicking the gecko start menu gives an error.
"Error loading QML
file:file///sur/share/plasma/plasmoids/org.kde.plasma.kicker/contents/ui/main.qml:27:1:
module "org.kde.plasma.private.kicker: is not installed"
The system is running and I see my desktop widgets doing their thing.
But I can't do anything. I can get to tty1 and login as root but I don't
know what to do from there.
I tried running yast in tty1 but get errors when I try software management.
This system was first installed with Leap 15.0, upgraded to 15.1, now to
a partially broken 15.2.
Any suggestions most welcome.
Jim F
I just tried to attach an iPad to my openSUSE 15.0 system, via USB. I
think I've done it before, but this time it fails. Dmesg has:
[9787970.148053] usb 3-9: new high-speed USB device number 96 using xhci_hcd
[9787970.302089] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a2
[9787970.302091] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[9787970.302092] usb 3-9: Product: iPad
[9787970.302093] usb 3-9: Manufacturer: Apple Inc.
[9787970.302094] usb 3-9: SerialNumber: c4088xxxxxserialxredacted
[9787971.044264] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached
[9787991.101146] pool[16789]: segfault at 0 ip 00007f6ada593ef1 sp 00007f6ad6203bd8 error 4 in libc-2.26.so[7f6ada43a000+1b1000]
Anybody have any idea what the problem is?
Thanks, Dave
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
is the packman repository down? moving servers? having a bad day?
my failing url is
http://packman.inode.at/suse/openSUSE_Leap_15.2/
when i disable it and then try to add anew using yast, community, it is
no longer listed as an option
On a recent Leap 15.2 install, I seem not to be able to get KDE to
remember file associations. More specifically, which application to
run for the file.
If I select a file in Konqueror, and then select an application in the
dialog Konqueror provides, and click the box that says to remember
this, when I click again on that same file, it once again asks which
application to use. It never remembers the association. It does run
the application after I select it. But never again unless I select the
application again.
When I say that the association should be remembered, I get the status
window saying that something is being updated. There is no error. In
the X log, I see this when the association is selected and being
remembered:
kbuildsycoca4 running...
So if there is an error, it is not presented anywhere I see.
Has anyone else seen this?
--
Roger Oberholtzer
