Hello List
am using Xfce : - in /var/log/warn : i see warning
" The gnome keyring socket is not owned with the same credentials as
the user login: /run/user/1000/keyring-4i77r7/control
2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login
keyring "
...............
- any ideas how to fix ?
thanks
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
$SUBJ says it all - I'm missing the hostname. When several PC are
connected via a kvm switch it's handy being able to tell where you are
logging in.
--
Per Jessen, Zürich (4.6°C)
http://www.dns24.ch/ - free dynamic DNS, made in Switzerland.
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
About a month ago I run a cross a post in forums showing the way to run
something like 'hdparm -B 254 /dev/sda' upon boot by simply setting some
parameter in YaST.
Foolishly enough I managed to loose the post and I do not remember it in
details. I googled for over an hour now and I cannot come across it any
more.
Anybody can make a suggestion here, please?
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
Hey,
I have install fest come up and I was wanting to know if this still
work with 13.2, or is there an update doc.
http://users.suse.com/~ug/autoyast_doc/index.html
Thanks,
--
Terror PUP a.k.a
Chuck "PUP" Payne
-----------------------------------------
Discover it! Enjoy it! Share it! openSUSE Linux.
-----------------------------------------
openSUSE -- Terrorpup
openSUSE Ambassador/openSUSE Member
skype,twiiter,identica,friendfeed -- terrorpup
freenode(irc) --terrorpup/lupinstein
Register Linux Userid: 155363
Have you tried SUSE Studio? Need to create a Live CD, an app you want
to package and distribute , or create your own linux distro. Give SUSE
Studio a try.
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
Hi all,
Reading some mails on the GIMP mail list, I ran across the procedure
to install some more fonts for not only Gimp, but the system and
StarOffice to use also. Well, I installed the fonts, went to the
shell and issued the command xset fp+ <font directory> and then the
rehash command and all fonts are there! Ok, that went well, but each
time I restart the system, I have to do it all over again? Is there
a way to make it permanent and read the new fonts like it does the
ones the system installs or is that a no-no?
end of line
Tracer
Shell commands:
xset fp+ <new font directory>
xset fp rehash
--
---KMail 1.2--- SuSE Linux v7.2---
Registered Linux User #225206
/tracerb(a)sprintmail.com/ *Magic Page Products*
*Team Amiga* http://home.sprintmail.com/~tracerb
Hello:
In openSUSE 13.2 the traditional network setup (ifup in yast) was removed and wicd (??) was introduced which I didn't like when I tried. Along with ifup kinternet/qinternet and related packages, eg smpppd (SuSE Meta PPP Daemon, the back-end for kinternet) have been removed too. I am curious how network manager independent network setup occurs in leap 42.1? Does it have kinternet on something similar?
Thanks,
Istvan
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
Good day, I am trying to find out of shorewall is supposed to work
with 13.2 properly, as I read about systemd stuff being in the midst
of creation and wicked and sort of that things that make it
problematic to run something different from susefirewall2.
Thanks for helping.
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I have this in "/etc/rsyslog.conf":
if ($programname == 'named' or $syslogtag == '[named]:') \
then -/var/log/named
& stop
...
if ($msg contains 'Started Session' and $msg contains 'of user') \
then -/var/log/systemdpurged
& stop
#
# the rest in one file
#
*.*;mail.none;news.none -/var/log/messages
I get the expected entries in "/var/log/systemdpurged":
<3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Started Session 93 of user cer.
<3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Started Session 94 of user news.
But I'm also getting them in "/var/log/messages":
<3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Starting Session 93 of user cer.
<3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Starting Session 94 of user news.
And they should not be there.
So the "stop" line for those systemd entries is not acting. However, it
works for other sections, like the "named" section shown above, and others
I do not show for clarity.
Are systemd entries special?
- --
Cheers
Carlos E. R.
(from 13.1 x86_64 "Bottle" at Telcontar)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEARECAAYFAlMSADcACgkQtTMYHG2NR9WCgwCdEgnb+Apy47tcjI31Dv5brA9X
+TMAoIt87JaGgMoP5Zf11OZM0XevIjif
=uI81
-----END PGP SIGNATURE-----
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Sigh.
I'm scanning old photographic negatives with a compact scanner (a
reflecta X7), and writing comments on the photos with Gwenview. But I
have a problem: other programs do not see them.
I don't see them with exif tools, for instance.
I don't see them with shotwell.
Conversely, if I write the comments with shotwell (which is configured
to write metadata to the photos, not to a database), I don't see them in
gwenview (but they do with "exif", tag "User Comment")
I hesitate to continue writing comments till I verify that they are in
fact written to the photo files, and that other programs read them.
I don't see any configuration option in Gwenview regarding this.
(why Gwenview? Because rotating photos is fast here, and it doesn't do
any library import. For the moment I only want to put each roll in its
own directory. Writing comments is also easy, although they are easyer
to see in Shotwell)
I'm not doing photo edit for the moment. Just archiving.
(Old slides have lost a lot of the colour)
- --
Cheers
Carlos E. R.
(from 13.1 x86_64 "Bottle" at Telcontar)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEARECAAYFAlas0FwACgkQtTMYHG2NR9UEoQCdHIpxWHvJwjqel85l16buM0KN
uhAAn2QdWpgq54RUYOsRu94mrfHVSXkw
=Ijn9
-----END PGP SIGNATURE-----
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
I have an ASUS_VN289H HDMI monitor connected to my Alienware HDMI output
port. When the external monitor is not connected, the system blanks the
screen the way I have requested. When the external monitor is connected,
the monitor blanks, then the monitor offers a lost signal message, and
the system unblanks. I would RTFM if I know which one to look at:-) What
I would like to know is how to disable the wakeup call that I think that
the monitor must be sending when it looses signal.
Thanks,
Don
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org