September 2001 - openSUSE Users - openSUSE Mailing Lists

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Adding fonts?
by Tracer Bullet 22 Aug '16

22 Aug '16

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

3 2

[SLE] LILO - files
by sander.van.vugt＠azlan.nl 06 Sep '04

06 Sep '04

Hi, I'dd like to know what the following files in the directory /boot are about. Can anyone give me a clue or point me to some documentation? - boot.b - chain.b - map - System.map-2.2.14 - chos.* Thanks in advance, Sander ********************************************************************** Disclaimer This email is confidential and intended solely for the use of the individual to whom it is adressed. Any views or opinions presented are solely those of the author and do do not necessarily represent those of the Azlan Holdings bv and/or subsidairy. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this email is strictly prohibited If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200. ********************************************************************* -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq

4 3

Triple Booting and Time Travel..
by lee 31 Aug '03

31 Aug '03

Before I do research on how to do this, it is possible to do this right, > on a 2 drive box, with SUSE 8.0 on 1 drive, Debian and 98se splitting > the other? I'm already dual booting fwiw.. > > Thank you for your time. Speaking of time, please check yours. Your email showed up with a date of March 2, 1999... Thanks, Stan Yes, I'm a time traveler you see, I'm only in this time segment now to check on a few stock investments I had in mind...thanx for the tip Stan.. Lee :-)

3 2

LILO & triple booting
by lee 23 Aug '03

23 Aug '03

Before I do research on how to do this, it is possible to do this right, on a 2 drive box, with SUSE 8.0 on 1 drive, Debian and 98se splitting the other? I'm already dual booting fwiw.. Thank you for your time.

5 4

Dell 2650/Perc3 Raid Controller easy switch??
by shado＠mc.net 25 Apr '03

25 Apr '03

I am currently using a Dell 2650 Poweredge server without a raid controller. It's using the standard adaptec onboard SCSI as it stands. I'm wondering if anyone has installed the Perc3 raid controller and had the Linux install just pop right up (assuming the megaraid module was loading)? I wouldn't need to reformat if all I was doing was switching controllers and hardware mirroring, right? Thanks, Rich shado(a)mc.net

2 1

Top output not adding up.
by Rowan Reid 17 Oct '02

17 Oct '02

I copy pasted my top out put below. Not sure if that was a good idea or not. My question is why is it showing 58Megs of ram being used but the % memory usuage barely adds up to 30% also could someoone guide me in understanding what the pri ni and such are thanks 2:38am up 23 days, 15:25, 2 users, load average: 0.00, 0.00, 0.00 42 processes: 41 sleeping, 1 running, 0 zombie, 0 stopped CPU states: 0.7% user, 0.7% system, 0.0% nice, 98.4% idle Mem: 61992K av, 58900K used, 3092K free, 0K shrd, 13432K buff Swap: 192740K av, 9364K used, 183376K free 22804K cached PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 1227 wwwrun 9 0 5568 2260 1972 S 0.0 3.6 0:09 httpd 804 wwwrun 9 0 5360 2088 2068 S 0.0 3.3 0:10 httpd 26105 ***** 11 0 2104 2060 1872 S 0.0 3.3 0:01 sshd 26103 root 9 0 1732 1672 1504 S 0.0 2.6 0:00 sshd 26122 root 9 0 1640 1640 1252 S 0.0 2.6 0:00 bash 26106 ***** 9 0 1544 1544 1168 S 0.0 2.4 0:00 bash 26121 root 9 0 1116 1116 792 S 0.0 1.8 0:00 su 421 root 9 0 1056 1036 412 S 0.0 1.6 0:12 klogd 805 root 9 0 1208 1028 988 S 0.0 1.6 0:00 bash 26174 root 14 0 976 976 776 R 1.3 1.5 0:03 top 937 root 9 0 1332 876 748 S 0.0 1.4 0:14 nmbd 533 root 9 0 852 700 664 S 0.0 1.1 0:14 sshd 596 root 9 0 1308 688 572 S 0.0 1.1 0:00 sendmail 590 mail 9 0 1192 684 596 S 0.0 1.1 0:00 sendmail 938 root 8 0 1068 576 496 S 0.0 0.9 0:00 smbd 418 root 9 0 580 560 468 S 0.0 0.9 0:03 syslogd 802 root 8 0 4232 548 532 S 0.0 0.8 0:02 httpd 796 root 9 0 872 508 508 S 0.0 0.8 0:00 login 733 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 734 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 735 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 736 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 737 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 738 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 739 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 6891 root 8 0 492 436 416 S 0.0 0.7 0:00 inetd 713 root 8 0 484 424 384 S 0.0 0.6 0:00 cron 557 at 9 0 432 380 344 S 0.0 0.6 0:00 atd 798 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 799 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 800 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 801 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 803 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 500 bin 9 0 432 348 348 S 0.0 0.5 0:00 portmap 765 root 8 0 504 248 232 S 0.0 0.4 0:00 smpppd 1 root 8 0 76 64 44 S 0.0 0.1 0:05 init 2 root 9 0 0 0 0 SW 0.0 0.0 0:00 keventd 3 root 19 19 0 0 0 SWN 0.0 0.0 0:00 ksoftirqd_CPU0 4 root 9 0 0 0 0 SW 0.0 0.0 0:13 kswapd 5 root 9 0 0 0 0 SW 0.0 0.0 0:00 bdflush 6 root 9 0 0 0 0 SW 0.0 0.0 0:12 kupdated 9 root 9 0 0 0 0 SW 0.0 0.0 0:00 kreiserfsd Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

Wireless PCMCIA in a Desktop: Will Linux Recognize it?
by Dennis J.Tuchler 28 Aug '02

28 Aug '02

I would be thankful for answers to some questions: about wireless cards 1) Re: Wireless Ethernet Cards for Desktops. How does one get Linux to recognize an ethernet card (e.g. a wireless card) that is not on the list of supported cards shown by YAST2? 2) Re: Installing a PCMCIA card onto a Desktop. I understand that one can install a wireless PCMCIA ethernet card in a desktop with the appropriate PCI card. Is there any problem with Linux's recognizing the card under these circumstances? Under Linux 8.0, is there any problem with recognition and use of a wireless PCMCIA? I read the relevant HowTo, but that installed under Debian and I think (guess) an older kernel. Thanks -- dj tuchler dtuchler(a)earthlink.net

5 7

[SLE] problems with KVM switches.. losing mouse control on 8.0
by Jon San Juan 07 May '02

07 May '02

I am using a multiple servers with a KVM switch and I find that I lose control of my mouse as I return back to the SUSE 8.0 KDE. Are any you experiencing the same thing. I have tried other mice and different KVM switches. -I am using a Belkin KVM switch with hot key functionality for changing monitors. -I am using PS/2 mice The only way I can stablize the mouse is if I return to YAST 2 and try to re-configure the mouse when it is a problem... Otherwise I have been rebooting to get the mouse stability.

8 9

Version 8.0 installation from hard drive with YaST2 possible?
by joe lerch 16 Apr '02

16 Apr '02

"No installation data found on medium" "Could not mount the source medium" Previously I was alawya able to use the orginal YaST to do hard drive installation, I was never able to get YaST2 past the above errors, if I exit YaST2 and start YaST everything works fine. It has always been this way for me and I didn't mind as I like using YaST. However, I am told that version 8.0 will no longer have YaST. Does anyone know if version 8.0 of SuSE pro will allow paying customers the right to copy the installation disks to their hard drive and do a complete installtion and further updates directly from the hard drive? If I have been skipping something, please let me know, it has been a while since I installed 7.3 my curent SuSe distro installation disks are on my /hda11/7.3 thanks in advacne joe

3 2