Hi all,
Reading some mails on the GIMP mail list, I ran across the procedure
to install some more fonts for not only Gimp, but the system and
StarOffice to use also. Well, I installed the fonts, went to the
shell and issued the command xset fp+ <font directory> and then the
rehash command and all fonts are there! Ok, that went well, but each
time I restart the system, I have to do it all over again? Is there
a way to make it permanent and read the new fonts like it does the
ones the system installs or is that a no-no?
end of line
Tracer
Shell commands:
xset fp+ <new font directory>
xset fp rehash
--
---KMail 1.2--- SuSE Linux v7.2---
Registered Linux User #225206
/tracerb(a)sprintmail.com/ *Magic Page Products*
*Team Amiga* http://home.sprintmail.com/~tracerb
Hi:
I just bought this printer, thinking it would work right out of the box. I'm
running SUSE 9.3 with CUPS, and it does not seem to support this model.
Anybody got this printer to work? Any pointers would help.
Best regards.
--
Alfredo Cole-Tuckler
Sid Boyce wrote:
> http://www.mandrake.tips.4.free.fr/opensuse10.3.review.html
> Mentions of "for the uninitiated" sounds about right. To sidestep any
> problems with the DVD, I've installed from Factory. Looks like the DVD
> should have been delayed until it was compared with Factory for
> stability.
> I think the reviewer attempted to be fair (he points to the URL to
> show where he is coming from). Perhaps some pertinent pointers for 11.0.
> Regards
> Sid.
http://www.mandrake.tips.4.free.fr/opensuse10.3.review.html should be
MUST READING for management at Novell and at openSuSE.org. It is
eminently fair and for the most part, accurate. I think any
inaccuracies could be attributable to unfamiliarity rather than bias.
If this reviewer hadn't been what I would call a 'Power-user', and had
instead been someone converting from Windows, not only would they
probably not have had a successful install, but would have an article
that Microsoft would probably have printed in full page ads throughout
the world. As it is, it should wake up Senior Management in SuSE.
regards
Richard
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse+help(a)opensuse.org
I performed a fresh install of opensuse 10.3 and proceeded to go to
http://software.opensuse.org/search for the codecs
I selected and executed Codec-Audio-Video.ymp. During the installation
process I received a dialogbox with the following major message and assoc
options.
No valid solution found with just resolvables of best architecture
and
speex cannot be installed due to missing dependencies.
--
View this message in context: http://www.nabble.com/Problem-with-codec-installer-in-opensuse-tp14946930p1…
Sent from the openSUSE community mailing list archive at Nabble.com.
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse+help(a)opensuse.org
Anybody tried it?, is it actually being used on the Opensuse project?.
Looks interesting.... Maybe it can replace workflow apps on
Domino/Notes...
Webpage: http://swamp.sourceforge.net/
SWAMP - The Workflow Platform
SWAMP is a workflow processing platform. Workflows are processes with
many people involved in many working steps. In a real world scenario
these workflows are highly dynamic, but still many systems try to
hardcode the business logic. That leads to raising efforts to adapt
the system.
Here is where SWAMP steps in: The workflow is designed in a XML based
meta language in one file which is read by SWAMP. Workflows can be
built from different workflow 'patterns' like simple actions,
decisions, selections, loops, but also custom code and external events
if required.
SWAMP builds a HTML GUI from the workflow definition file that guides
different users through the whole process, sends notifications if
required, assembles overview pages over all running processes and much
more. A SOAP interface can be used to integrate external systems into
the workflow.
These are SWAMPs main Features:
* Support of many different workflow patterns
* Flexibility in workflow design: A workflow can be specified in a
single XML file
* Workflow evolution: Workflows can be developed while in
operation (versioning)
* Ease of use: clear and straightforward XML based workflow
definition language, no coding skills needed
* Workflows can attach data and files
* Automatic web-GUI generation for handling individual tasks and
administrating workflows
* Running on Linux + Windows with OS-independant tools: Java, Tomcat, MySQL
* MySQL + LDAP authentication possible
* User and Role management, workflows/tasks can be restricted
* Mail notification system included
* Unlimited amount of different workflow-types on one server
* Scheduler to control time-critical workflow paths
* SOAP interface allows interaction with external systems
* Openness: Custom code allows unlimited functionality, event- and
data gateways
* Customizeable overview lists with filters
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse+help(a)opensuse.org
I had that little symbol "electrical plug" on the bottom of the screen,
indicating whether I was connected or not. It diappeared, probably my
doing, how do I get it back to get connected?
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse+help(a)opensuse.org
What do I have to do after I download, say thuntherbird, I find two
incons on the desktop with a lot of files in each, what is the next step
to get the program going.?
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse+help(a)opensuse.org
I tried to install ATI ctcalyst driver VIA one click install, and it is not
working. Log gives something like this:
WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
(EE) fglrx(0): XMM failed to open CMMQS connection.
Vied card is:
ATI Radeon HD 3450 (RV620 95C5)
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse+help(a)opensuse.org
All,
OS 10.3 / KDE / Network Printer (HP 4500 Color Laser)
My printer has somehow stalled. Everything I print goes to a queue
and never pops out of the printer.
I know the printer is not the problem because I have a XP VM on the
same machine and I can print from there fine.
How do I tell OS to start printing again.
Thanks
Greg
--
Greg Freemyer
Litigation Triage Solutions Specialist
http://www.linkedin.com/in/gregfreemyer
First 99 Days Litigation White Paper -
http://www.norcrossgroup.com/forms/whitepapers/99%20Days%20whitepaper.pdf
The Norcross Group
The Intersection of Evidence & Technology
http://www.norcrossgroup.com
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse+help(a)opensuse.org
I am trying to copy the contents of an ext3 partition
to an external usb drive with a fat32 partition.
The first copy copied most files, but there were
files with special characters in their name which failed to copy.
I used krename to change the file names on the ext2 partition
but that did not change the file names.
So i renamed them by hand.
Now i used grsync to update the fat32 partition.
I get the following error message:
"rsync: opendir "/disk2/lost+found" failed: Permission denied (13)
rsync error: some files could not be transferred (code 23) at
main.c(977) [sender=2.6.9]"
And the following rsync output:
"*** Launching RSYNC command:
rsync -r -t -x -v --progress --delete --size-only -u --modify-window=1
/disk2/ /media/Elements/
building file list ...
1400 files... 6750 files to consider
IO error encountered -- skipping file deletion
rsync error: some files could not be transferred (code 23) at
main.c(977) [sender=2.6.9]
sent 278140 bytes received 20 bytes 556320.00 bytes/sec
total size is 275813232309 speedup is 991563.25"
the ext3 partition disk2 now contains 6277 files, 472 subfolders
256.9 GB (275 815 358 133)
the fat32 partition 6282 files, 472 subfolders
256.9GB (275 837 017 758)
It looks like the files with the special characters in their name
were renamed as hidden files and now can not be deleted ?
.eBook - Psychologie, Psychiatrie - Auszug [Der Psychotherapeut -
Springer Verlag 2000] - Die Behandlung Von
Borderline-Persnlichkeitsstrungen.pdf.1x10Rv
But even after removing the trailing dot,
the file is now 3 times on fat32:
eBook - Psychologie, Psychiatrie - Auszug [Der Psychotherapeut -
Springer Verlag 2000] - Die Behandlung Von
Borderline-Persnlichkeitsstrungen.pdf
eBook - Psychologie, Psychiatrie - Auszug [Der Psychotherapeut -
Springer Verlag 2000] - Die Behandlung Von
Borderline-Persoenlichkeitsstoerungen.pdf
Even when unchecking "windows compatibility" in grsync, i get:
"rsync error: some files could not be transferred (code 23) at
main.c(977) [sender=2.6.9]"
I did fsck -p for /dev/disk2: no errors.
Are these rsync limitations ?
Kind regards Philippe
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse+help(a)opensuse.org