openSUSE Users May 2009

users@lists.opensuse.org

228 participants
321 discussions

by Tracer Bullet

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

4 years, 8 months

[opensuse] Where can I get genIS_PLAINcache

by Chuck Payne

Hi, I am trying to set up a simple repo, I read on the opensuse site about a binary called genIS_PLAINcache, because I can't see to find it or the package yast2-packmanager either. Can someone help. I am setting this repo up for SLE9, I have tried to use createrepo but I keeping getting errors. -- ---------------------------------------- When a place gets crowded enough to require ID's, social collapse is not far away. It is time to go elsewhere. The best thing about space travel is that it made it possible to go elsewhere. -- Robert Heinlein -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 years, 6 months

HP Laser 1020

by Alfredo Cole

Hi: I just bought this printer, thinking it would work right out of the box. I'm running SUSE 9.3 with CUPS, and it does not seem to support this model. Anybody got this printer to work? Any pointers would help. Best regards. -- Alfredo Cole-Tuckler

11 years

[opensuse] Re: [opensuse-factory] 10.3 Review

by Richard Creighton

Sid Boyce wrote: > http://www.mandrake.tips.4.free.fr/opensuse10.3.review.html > Mentions of "for the uninitiated" sounds about right. To sidestep any > problems with the DVD, I've installed from Factory. Looks like the DVD > should have been delayed until it was compared with Factory for > stability. > I think the reviewer attempted to be fair (he points to the URL to > show where he is coming from). Perhaps some pertinent pointers for 11.0. > Regards > Sid. http://www.mandrake.tips.4.free.fr/opensuse10.3.review.html should be MUST READING for management at Novell and at openSuSE.org. It is eminently fair and for the most part, accurate. I think any inaccuracies could be attributable to unfamiliarity rather than bias. If this reviewer hadn't been what I would call a 'Power-user', and had instead been someone converting from Windows, not only would they probably not have had a successful install, but would have an article that Microsoft would probably have printed in full page ads throughout the world. As it is, it should wake up Senior Management in SuSE. regards Richard -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 years, 6 months

[opensuse] 11.1 on a thinkpad T500

by jef peeraer

installed it yesterday on my brand new thinkpad, and most of the basic stuff seems to be working : tested the wired/wireless connection :ok. can write DVD's, sound is ok, hibernation and sleep : ok , sdcard reader : ok, and last but not least, video graphics, weel that's a special case with this laptop, it includes 2 graphic controller : 1 discrete, the ati hd3650 and am integrated controller , intel mobile GM45 express chipset. i knew i wasn't going to get this switchable graphics thing in order... by default, the installation chooses the intel chipset. which works ok, but doesn't give you the power of the ATI. i changed the bios setting to discrete graphics ( swichable off ). when booted into command line, i could run sax and it installed the correct ATI drivers. but the next reboot set me back to the intel chipset, and indeed the bios was back to switchable graphics enabled ? jef peeraer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 years, 7 months

[opensuse] kde4 konqueror will not connect via proxy

by lynn

The proxy works for firefox but not for konq in 11.0 kde 4. I've tested the proxy via yast and it works fine. Also, other browsers recognise it. Bug? I'm using squid on a 10.3 server with 11.0 and KDE4 Thanks. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 years, 8 months

[opensuse] kde3 is gone... for 11.2

by jdd

I just notice that there will be nomore kde3 for the upcomming openSUSE 11.2. I don't want to grin. Not necessary. I just wanted to ask here what do you have in kde3.5 and don't find in kde4 and you would like to have. Not to say you will have it but to give info to devs... I stopped using kde4 on 11.1 for problems in the config panel and lack of understanding of the new windows layout. I expect this to be solved before next release; what do you think? be constructive :-) jdd NB: I miss the kweather applet, but it don't work neither in kde 3.5 :-( -- http://www.dodin.net http://valerie.dodin.org http://www.youtube.com/watch?v=t-eic8MSSfM http://www.facebook.com/profile.php?id=1412160445 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 years, 8 months

[opensuse] curl error-connection time out

by Teruel de Campo MD

Today I finally installing opensuse 11.1 kde 4.2 in all machines. Q. Using yast software manager to update the system very often I get a curl error and a connection time out. I retry and everything is OK. Everything is working OK but I had to be behind the screen to interact all the time with this connection time outs. I do not remember anything like that previously. It may be the server are very busy. Any comments. -=terry=- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 years, 9 months

[opensuse] Annoying Desktop behaviour of Programmes

by LLLActive＠GMX.Net

Hi all, what is beginning to be quite annoying is working with different Desktops. I have different working groups organised on a desktop each. I often have OpenOffice Writer, Calc and Firefox open on various desktops. When I open up a link on Desktop 1 in Thunderbird, a window opens on the latest FireFox I used prevously; the one on the other desktop I used last. I have to hunt down in which desktop it opened by going to each desktop and activate it. This also happens when I open an OpenOffice document or calc file with konqueror. Closing all apps on the desktops before going to another desktop defeats the purpose of having different desktops - or have I missed the rational behind different desktops. Is it a bug or a feature? :-( All -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 years, 9 months

Re: [opensuse] New ATI driver released... And works! -- NOT!

by David C. Rankin

Dave Plater wrote: > David C. Rankin wrote: >> >> Dave, >> >> Your english was fine, I was just suffering from a momentary cranal-rectal >> inversion :-( >> >> >> > By the way, Peter didn't seem to have solved his problem which I think > may be due to his not having the devel versions installed. I have no > experience with ATI only nvidia, in fact from what I've seen on this > list I don't want to have any ATI experience. Does the installation of > his driver require the development versions to be installed? Maybe you > can put him on the right track. > Regards > Dave P > > > Dave, The devel versions shouldn't be required. When I checked my 11.0 version, all I have is compat-libstdc++-5.0.7-121.1 (which I understand is libstdc++33 in 11.1), but: [01:44 alchemy:/srv/www/htdocs/wordpress] # rpm -qa | grep libstdc++ compat-libstdc++-5.0.7-121.1 ------------- I do have other unrelated devel packages installed: libstdc++44-4.4.0_20090316-2.1 libstdc++43-devel-4.3.3_20090126-2.3 libstdc++43-doc-4.3.3_20090316-2.1 libstdc++44-32bit-4.4.0_20090316-2.1 libstdc++-devel-4.3-39.1 but nothing on the system related to libstdc++.so.5 [02:16 alchemy:/srv/www/htdocs/wordpress] # rpm -q --whatprovides libstdc++.so.5 compat-libstdc++-5.0.7-121.1 I have never had a compile problem with the ATI driver related to a missing library. ATI botched a couple of driver releases that not even Stefan could compile for 11.1. The key here I think is 11.1. ATI hasn't released a driver to date that will work with my hardware and 11.1. Anders and others are doing OK with the 9-3 release (although I suspect if they compare the 11.1 fglrx driver performance to that of the Sept. 08 driver running on 11.0 or 10.3 they would be wildly disappointed by the comparison.) The problem is there is no "measuring stick" or a good performing driver that will compile against 11.1. I know in my experience with the 8-10, 8-11, 8-12, and 9-1 fglrx drivers, my graphics performance on my laptop with an X1200/x1300 chipset all the foregoing drivers suffer greater than a 40% performance loss compared against the 8-9 driver. I would like to see the test results of others who think the 9-3 driver is doing OK, comparing (1) the glxgears frame rates w/default window size, and (2) the overall feel and responsiveness of the graphics subsystem against their same hardware running 11.0 or 10.3 with the 8-9 driver. I would be willing to wager their would be a bunch of bruised chins from all the "jaw dropping" that would occur when the performance penalty of the recent ATI drivers is actually measured in black-and-white. It's almost impossible to tell how much of a performance hit you have taken just by looking at the screen and saying "yes, it looks OK" without doing an actual comparison. As for Peter, the only thing I can think of is just to plug libstdc++.so.5 into webpin on 11.1 and see what packages come back and then install those packages to get around his compile problem. The search on 11.1 says the package is provided by the following. Since I don't run 11.1 (primarily due to the ATI issue (to be fair other things as well)), I haven't had to beat my head into the wall over this yet, but if it were me, I would just go down the list of the 1-click installs below, find my architecture and install every damn one of them that matched until I had a usable libstdc++.so.5 on my system to compile against: Results from http://download.opensuse.org/distribution/11.1/repo/oss/ libstdc++33 (3.3.3) The standard C++ shared library contains /usr/lib/libstdc++.so.5 1-click: http://api.opensuse-community.org/searchservice//YMPs/openSUSE_111/3ca198ef… libstdc++33-32bit (3.3.3) The standard C++ shared library contains /usr/lib/libstdc++.so.5 Results from http://download.opensuse.org/repositories/devel:/gcc/openSUSE_11.1 1-click: http://api.opensuse-community.org/searchservice//YMPs/openSUSE_111/19e75469… libstdc++33 (3.3.3) The standard C++ shared library contains /usr/lib/libstdc++.so.5 1-click: http://api.opensuse-community.org/searchservice//YMPs/openSUSE_111/f12e9978… libstdc++33-32bit (3.3.3) The standard C++ shared library contains /usr/lib/libstdc++.so.5 1-click: http://api.opensuse-community.org/searchservice//YMPs/openSUSE_111/c7de6099… libstdc++33-64bit (3.3.3) The standard C++ shared library contains /usr/lib64/libstdc++.so.5 1-click: http://api.opensuse-community.org/searchservice//YMPs/openSUSE_111/8d311289… And if that didn't work, I'd just grab a copy from 11.0 and see if that would work. Looking closer, the libstdc++.so.5 isn't even a real file, on 11.0 it is just sym linked against libstdc++.so.5.0.7: 02:18 alchemy:/srv/www/htdocs/wordpress] # l /usr/lib64/libstdc++.so.5 lrwxrwxrwx 1 root root 18 2008-07-26 17:47 /usr/lib64/libstdc++.so.5 -> libstdc++.so.5.0.7* [02:37 alchemy:/srv/www/htdocs/wordpress] # l /usr/lib64/libstdc++.so.5.0.7 -rwxr-xr-x 1 root root 855856 2008-06-06 16:45 /usr/lib64/libstdc++.so.5.0.7* Hell, Peter's problem may be as simple as just recreating the sym link. Peter, give this a try [as root]: [[ -f /usr/lib64/libstdc++.so.5.0.7 ]] && ln -s /usr/lib64/libstdc++.so.5.0.7 /usr/lib64/libstdc++.so.5 -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 years, 10 months

Jump to page:

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

openSUSE Users May 2009