openSUSE Users June 2018

users@lists.opensuse.org

107 participants
125 discussions

oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"

by ellanios82

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 year, 3 months

Re: [opensuse] Mapping and re-mapping Keyboard Keys

by Paul Groves

On 27/06/17 12:22, Paul Groves wrote: > > On 27/06/17 08:34, Aaron Digulla wrote: >> xmodmap -pke | less > > These keycodes do not seem to match the system. For example in the > output of this command it says: > > keycode 158 = XF86WWW NoSymbol XF86WWW > > I ran setkeycodes e020 158 > > When I press the e020 (Internet) button xev says I have pressed code > 166 (Back button). > > How on earth has this happened? I specified 158 not 166. What have I > done wrong? > > Just been emailed this link: https://unix.stackexchange.com/questions/49650/how-to-get-keycodes-for-xmod… To quote this article: Here you can see keycode 97 is unused on my system: |keycode 94 = less greater less greater bar brokenbar keycode 95 = F11 XF86Switch_VT_11 F11 XF86Switch_VT_11 keycode 96 = F12 XF86Switch_VT_12 F12 XF86Switch_VT_12 keycode 97 = keycode 98 = Katakana NoSymbol Katakana keycode 99 = Hiragana NoSymbol Hiragana | The keycode X uses and the keycode the kernel uses are OFF BY 8 for "historical reasons". So take 97 - 8 = 89 and use 89 with the setkeycodes command (again as root): So to make my vol - button work (xmodmap keycode 122 -8 = 114) setkeycodes e01e 114 This has worked! I have re-mapped apl the buttons apart from my hotkeys. >> No but there are lots of uncommon keycodes which you can use. For >> example, F13-F35 or KP_F1...KP_F4. > > In the output of the command xmodmap -pke | less there are no codes > for F13-F35 or KP_F1 etc > > I would like to set HK1 - HK4 to F13 - F16 How do I find the keycodes > for these buttons Still looking for the keycodes for F13-16 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 year, 8 months

Spec'ing a 50 TB dedicated storage subsystem and room to grow?

by Greg Freemyer

All, I bought a used iSCSI based Drobo in 2016 with 50TB in it. It works great, but it isn't fast by today's standards. (100 MB/sec absolute max). And I never got it to work from openSUSE (Windows and Mac did work). I now need to buy something similar, but with fast I/O and Linux support: 10 Gbit Ethernet and fibre-channel may be my only options? Or are there point-to-point SAS external racks I should consider? Also, I will likely want to put a SSD based cache in the mix at some point. It could be integrated into the storage subsystem, or I could use something like bcache and have the SSD be in the server,. It just needs to be reliable and fast. Recommendations? (I'm thinking used and $10K at the high-end for the subsystem including PCIx cards and switches, if needed.) == details I need to buy a server with 50TB usable disk for a production environment. A high speed disk subsystem is critical. And the project may scale up over time. It doesn't need to be a fail-over cluster, just a single server. I'm looking at used equipment most likely. I was thinking one with 4 CPU sockets would let me start with 2 CPUs and then expand to 4 later on. Lots of RAM capacity would also be great. My first thought was to get a Dell R920 and throw a bunch of disks in it. https://goo.gl/images/x3Rfj2 24 disk slots! But then I looked at what size drives are available for those slots: 2.5 inch. I only see 2TB drives max. I'm hoping to use a Dell server because it's the preferred brand at my (new) job. Unless I'm missing something a standalone rack mount Dell won't work. So, now I'm looking at a used R820 most likely and some sort of disk subsystem to support it. I picked it because it is only a 5-year old design and it has 4 CPU sockets I can expand into as the server demand increases over time. Also 3TB max ram is way above what this will require, even long term. https://media.adn.de/media/DE/DocLib/Poweredge_Easy_Matrix.pdf A used, barebones R820 can be had for under $2K. Just add CPUs and ram. Greg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 year, 9 months

continous access on/spinning up of floppy drive

by Paul Neuwirth

This is an OpenPGP/MIME signed message (RFC2440, RFC3156). --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_= Content-Type: text/plain; charset="utf-8" Content-Disposition: inline; filename="message.txt" Content-Transfer-Encoding: quoted-printable Hello group, I have on several machines this problem: they are continously trying to=20 access the floppy drives. Two drives already defective, due to the=20 mechanic stress. dmesg shows following continously: [1537682.559487] sd 0:0:3:0: [sdc] Read Capacity(10) failed: Result:=20 hostbyte=3DDID_OK driverbyte=3DDRIVER_SENSE [1537682.559496] sd 0:0:3:0: [sdc] Sense Key : Not Ready [current] [1537682.559498] sd 0:0:3:0: [sdc] Add. Sense: Logical unit not ready,=20 cause not reportable [1537682.656688] sd 0:0:3:0: [sdc] Spinning up disk... [1537683.668046]=20 ............................................................................= ..................not=20 responding... [1537783.093938] sd 0:0:3:0: [sdc] Spinning up disk... [1537784.104049]=20 ............................................................................= ..................not=20 responding... this can't be the wanted behaviour for any removable storage devices? Any Hints? Thank you and have a nice weekend --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_= Content-Type: application/pgp-signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 Comment: Topal (http://freshmeat.net/projects/topal) iQIcBAEBAgAGBQJaLS66AAoJEIiaa+Y8YDPuZSUP/itt7+QHjNCwX6Wi352+lANf whjep7nBWy6Q0bS2PO/ymWDGiodFkO/AvM+MIitdK4cAm1HCBbMZjKsZYLD3e1LR ZnskqO66VG58TU6lVB1jEXWKlp6OKeb6Ar24SR0YxB4F+ZcbSwZI5w62JEBsozhV X4imcBdO+ztJFSW/hFLeV4WrfrplcTufyL6nw+5TtImrVs62uEg20LYjA//OxlHJ NmXM07A48uVBijRUmMsqeyRMevoKjKop2iICZgKyvTnRtRqx0jbzVeqj+aLqnbaq ncdBnBr7Vr9S86TVGHjIDHPN8Ws8dnufk1GwRTQR+Aj4z58g2r88j/u6o7csTFla vINP3ClCp6MRVbVbEqIYOIvG8NDIVTiwQwXk3CeCf+Be71JbDUMjV9GwVl+X9ksC oNBwwFi+mhHQGJOuX/54HGUEn3lJ1ixQzLimuXTgWmdsb1WoWuG+lNO13NhU+ZVn /IKpcqVjkXikQi9hrmZTUutmrFjJ1QusjnPJQDuBLYB0E/lMWjTpUNmRGw71hrDb uccAYc3sQP6zMuUfEgPWewhMmuTwn1LoQdqYrZ0p1+1z/+w5cB3DOB4JILmbKBUH QUYaDhefxPL1oRBtOxoDAdABJLAfgfKdEE0+g0u6HA67Atioe3HP8MWonrKgs3FC pvU9BHc2k0ASHh7HEsRx =uYfb -----END PGP SIGNATURE----- --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_=-- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 1 month

CANBus experience

by Roger Oberholtzer

Anyone using a CANBus card with openSUSE? We will soon have a MobilEye device that we want to test integrating with our system. And it speaks CANBus. We are on our own to provide the CANBus card. So something that is known to play nice with Linux/openSUSE is what we are looking for. So any suggestions or experiences are welcome. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 3 months

What means this on Yast?

by Carlos E. R.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I manually added repository packman on Leap 15.0 (by URL). I then tried to change priority from 99 to 98. Yast warned: Repository 'Ext_Packman' is managed by service". Your manual changes might be reset by the next service refresh! What on earth is that!? Note: The string «service".», I guess that '"' was '"', but I can not actually make it out what it was, too tiny. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAls39V4ACgkQtTMYHG2NR9WgZgCfdAQbif2+CRAeW8/JwRhHUsXq ZRgAnjWRIdmmd4ycWsfc2M5j682lKDer =ue0h -----END PGP SIGNATURE-----

2 years, 4 months

why do I have both kde4init and kde5init running?

by Anton Aylward

I see > ps -ef | grep init anton 505 1 0 14:35 ? 00:00:00 kdeinit4: kdeinit4 Runnin e anton 506 505 0 14:35 ? 00:00:00 kdeinit4: klauncher [kdei e anton 508 1 0 14:35 ? 00:00:00 kdeinit4: kded4 [kdeinit] anton 2368 31300 0 18:37 pts/1 00:00:00 grep --color=auto init anton 31121 1 0 12:37 ? 00:00:00 /usr/bin/dbus-launch --sh-syntax --exit-with-session /home/anton/.xinitrc anton 31168 1 0 12:37 ? 00:00:00 /usr/lib64/libexec/kf5/start_kdeinit --kded +kcminit_startup anton 31169 1 0 12:37 ? 00:00:00 kdeinit5: Running... anton 31173 31169 0 12:37 ? 00:00:01 kded5 [kdeinit5] anton 32194 31169 0 12:37 ? 00:00:01 file.so [kdeinit5] file local:/run/user/501/klauncherJ31170.1.slave-socket local:/run/user/501/dolphinn31296.4.slave-socket > tail ~/.xinitrc # pland & # # finally start the window manager # unset WINDOW_MANAGER STARTUP exec $WINDOWMANAGER ${1+"$@"} # call failsafe exit 0 > env | grep WIN WINDOWID=69206021 WINDOWMANAGER=/usr/bin/startkde WINDOWPATH=7 > rpm -qf /usr/bin/startkde plasma5-workspace-5.8.7-11.1.x86_64 THAT is _supposed_ to check for an already running KDE session. There is a function 'kcheckrunning' at /usr/bin/ So why do I get both 4 & 5? -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 4 months

MSI GE63 7RD : No openSUSE Leap 15?

by Markus Egg

Finally after a long search my selection for new laptop is the MSI GE63 7RD. Several internet tests were quite positive and -most important- it is very silent. Also the Ubuntu community said that these MSI laptops are quite "standard" stuff, only few tweaks, Optimus seems to be one thing to tweak. But: after having bought this machine I have to realize that openSUSE Leap 15 does not seem to be ready for this laptop (although amazon.de lists this machine since July 3rd 2017). There is a bunch of error messages when booting it up from USB after setting Secure boot to off and fast boot also. The worst one seems to be "NMI watchdog : BUG soft lockup CPU4 stuck for 22s!" afterwards SuSE15 seems to be stuck and I have to turn off by switch. I also tried tumbleweed on a USB stick - same error. Actually I was able to install Ubuntu 18.04 LTS with a tweak of bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi under Windows 10 because otherwise the grub boot manager is not shown. Everything else seems to work after doing that tweak with nVidia which is described in internet all over. Does this mean I have to say goodbye to SuSE on my Laptop? After approx 28 years using SuSE? :-/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 4 months

Boot problem after latest TW dup

by Ken Schneider - openSUSE

Old HP computer so possible hardware issues. I had issues during the dup to 20180628 and need to use the rescue system to repair grub. I cannot find an email I had with steps including 'bind -o' in them so if some kind soul could sent the procedure I would appreciate it. I've already repaired the filesystem but need to repair grub as well. Many thanks. -- Ken Schneider SuSe since Version 5.2, June 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 4 months

weird error on opensuse site following an advert: new encryption only on suse?

by L A Walsh

I followed an opensuse advert for selling data storage for body-cams to police. It went through some redirects on google, then went to www.suse.com, where I prompt got some weird error I can't reproduce because google is serving up a different advert, and I don't know the URL because google encrypts the SSL stream (recently upgraded my squid and have yet to pop in a new local cert to decode it). This is a perfect reason why I hate needless encrypting of webpages -- as now I can't even find the URL I was on let alone reproduce the problem from it. However, I get a different but similar error if I try to goto the website directly. The connection was interrupted The connection to www.suse.com was interrupted while the page was loading. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Pale Moon is permitted to access the Web. ----- Before, when I got the error, in my proxy log I got: +5.86 0ms; 0 (0/-) NONE/000 <Athenae [NONE error:transaction-end-before-headers - - -] +0.00 0ms; 0 (-/-) NONE/000 <Athenae [NONE error:transaction-end-before-headers - - -] +11.37 2038ms; 39 (3.0/19.0) TUNNEL/200 <Athenae [CONNECT www.suse.com:443 - 130.57.66.10 -] +34.72 2044ms; 39 (1.0/19.0) TUNNEL/200 <Athenae [CONNECT www.suse.com:443 - 130.57.66.10 -] --- After most of the suse connects, I see the weird message in my squidlog that I've never seen before "error:transaction-end-before-headers"... I get the same message going to the opensuse network forums webpage. I have a feeling it has to do with the new encryption as I'm using an older browser by default So far, opensuse is the first site that I've hit this on. I know it isn't the proxy, as it opens in another (newer browser (opera)). So the claim is that open suse is doing this because google is forcing it. Then why am I not having the same problem with other web pages -- including google? This new encryption (if that's what it is and if it was done right) seems to be only present on opensuse systems at this point (maybe more will pop up later). But the part I find to be the most strange is that the sites that the ad was on, had no problem, I have no problems any google site (youtube, plus, etc). Just suse.com and opensuse.org. I don't have the problem on download.opensuse.org (which defaults to http for me), nor the https version used on that site. So why is opensuse causing problems for some browsers, but no one else seems to be (including download site)? Ideas? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 4 months

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

openSUSE Users June 2018