openSUSE Users May 2021

users@lists.opensuse.org

70 participants
67 discussions

[opensuse] Memtest & UEFI
by James Knott 26 May '22

26 May '22

In openSUSE 15.1, memtest, as installed, would not work with UEFI. Has this been fixed in 15.2? There is a version on the memtest website that will work with it. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 10

[opensuse] Bug in usb drivers? "Not enough bandwidth for new device state"
by Markus Egg 28 Feb '22

28 Feb '22

SuSE Tumbleweed with newest updates and upgrades. 5.7.1-1-default #1 SMP Wed Jun 10 11:53:46 UTC 2020 (6a549f6) x86_64 x86_64 x86_64 GNU/Linux Just recently started to give error messages when plugging in e.g. USB Headsets, Arduino Uno into some Exsys USB 3.0 hub. This was working fine in Tumbleweed before and in e.g. SuSE 13.1. The error message is e.g.: [...]usb 2-1.4.3: new full-speed USB device number 10 using xhci_hcd [...]usb 2-1.4.3: New USB device found, idVendor=2341, idProduct=0043, bcdDevice= 0.01 [...]usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=220 [...]usb 2-1.4.3: Manufacturer: Arduino (www.arduino.cc) ...serialnumber... [...]kernel: usb 2-1.4.3: Not enough bandwidth for new device state. [...]kernel: usb 2-1.4.3: can't set config #1, error -28 This error message started on Jun 04, after making an update (zypper up) on June 3rd. A USB3.0 stick is working on the Exsys Hub. The Arduino is working on some other USB 3.0 Port of another hub. Regression? Any hints how to get this away? Found only another occurrence of this bug: http://opensuse92.rssing.com/chan-20813128/all_p1407.html Best regards -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Kernel compilation the openSUSE way?
by Bjoern Voigt 28 Nov '21

28 Nov '21

I usually take the newest openSUSE kernel (from repository Kernel_stable). But since some month I have a DVB T2 HD card, which requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171). So I need to compile kernels myself. I have a working compilation path. But the current path has 12 steps! It takes some time. I wonder, why it is so complicated to configure, compile and install a Kernel under openSUSE. Is there a better/easier/automated way to configure, compile and install a Kernel under openSUSE? I know this blog article. But the article uses Vanilla kernels and also needs 6 steps. With additional patches (4 steps), third-party modules (2 steps) and cleanup (1 step) the article would also need 13 steps: Compiling the Linux Kernel, the SUSE way https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/ This is my Kernel configuration, compilation and installation path: 1. Update kernel-source and kernel-default from Kernel_stable repository 2. Save kernel-source: cp -a /usr/src/linux-4.x.y-... /usr/src/linux-4.x.y-my 3. Apply my patches cd /usr/src/linux-4.x.y-my patch -b -p1 < ~myuser/.../my-kernel-patch.patch 4. Copy standard configuration: cd /usr/src/linux-4.x.y-my cp -v /boot/config-4.11.4-1.gcba98ee-default .config 5. Edit .config: remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT remove some hardware-dependent settings 6. edit configuration interactively: Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise "make binrpm-pkg" creates huge kernel binaries. make oldconfig [...] Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1 * * Configure standard kernel features (expert users) * Configure standard kernel features (expert users) (EXPERT) [N/y/?] (NEW) Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW) make menuconfig Do some additional configuration. 7. Compile kernel (-j4 for four processor cores, ionice and nice to reduce the load, binrpm-pkg for RPM without source-RPM) make clean nice ionice -c idle make -j4 binrpm-pkg 8. Install the kernel RPM package rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm 9. Install necessary symbolic links for "dkms" cd /lib/modules/4.x.y-my1 ln -sv /usr/src/linux-4.x.y-my source ln -sv /usr/src/linux-4.x.y-my build 10. Update third-party modules (e.g. Nvidia driver): dkms install -m nvidia -v 375.66 -k 4.x.y-my1 11. Cleanup cd /usr/src/linux-4.x.y-my make clean 12. Select Grub configuration and reboot grub2-once --list | less grub2-once 2 reboot Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

Problem with software raid and Tumbleweed
by Markus Egg 15 Sep '21

15 Sep '21

Hello, I got Tumbleweed Snapshot20210115 and wanted to install it on a rather old machine with a software raid1 (UEFI raid). On this raid some Windows 10 is already existing. The installer of Tumbleweed Snapshot20210115 does not recognize this software raid1. It only shows single harddiscs and no raid volume. An older snapshot 20190704 is able to see that software raid1 but I cannot do any zypper dup with that one (this version was running previously before some hardware crash). Any help for that - either a snapshot which can handle software raid1 or some way to set zypper dup running again with the older snapshot? BR and thanks in advance Markus

14 46

On one computer, xfce4-panel is using 1.4 GB.
by Carlos E. R. 01 Jul '21

01 Jul '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 View of top, sorting by memory: top - 13:27:09 up 12 days, 9:30, 5 users, load average: 5.12, 3.70, 2.15 Tasks: 408 total, 4 running, 404 sleeping, 0 stopped, 0 zombie %Cpu(s): 14.3 us, 7.3 sy, 0.0 ni, 24.6 id, 53.5 wa, 0.0 hi, 0.3 si, 0.0 st KiB Mem : 7995344 total, 857392 free, 5739144 used, 1398808 buff/cache KiB Swap: 9446396 total, 9354748 free, 91648 used. 1616044 avail Mem PID USER PR NI VIRT RES SHR SWAP S %CPU TIME+ COMMAND 3971 cer 20 0 1702692 1.122g 12312 0 S 0.000 1:13.24 xfce4-panel <===== 5154 cer 20 0 3924304 1.033g 33148 0 S 0.000 69:28.87 WebExtensions 4021 cer 20 0 4299592 922428 129636 0 S 8.125 552:36.75 firefox 5103 cer 20 0 3893680 398436 102932 0 R 25.62 2938:04 Web Content 19778 cer 20 0 2644216 355808 57124 0 S 3.125 1470:05 kodi-x11 18478 cer 20 0 3141844 335740 101772 0 S 0.625 42:10.54 Web Content 19741 cer 20 0 3250292 228088 39508 0 S 0.625 163:18.54 Web Content I'm very surprised by the high memmory usage of xfce4-panel. 1.2 Gigs? Process tree (ps -fx): PID TTY STAT TIME COMMAND ... 2429 ? Sl 0:00 /usr/bin/sddm 2432 tty7 Ssl+ 304:20 \_ /usr/bin/X -nolisten tcp -auth /run/sddm/{cb0ab23f-eda4-4c5d-bf88-a9504ffda949} -background none -noreset -displayfd 17 -seat seat0 vt7 3819 ? S 0:00 \_ /usr/lib/sddm/sddm-helper --socket /tmp/sddm-auth567d414c-8028-40ca-97ed-a8779b3d8335 --id 1 --start startxfce4 --user cer 3835 ? Sl 0:04 \_ xfce4-session 3888 ? Ss 0:04 \_ /usr/bin/ssh-agent /usr/bin/gpg-agent --sh --daemon --keep-display /etc/X11/xinit/xinitrc 3889 ? Ss 0:34 \_ /usr/bin/gpg-agent --sh --daemon --keep-display /etc/X11/xinit/xinitrc 3945 ? Sl 88:42 \_ xfwm4 --display :0.0 --sm-client-id 27ef593e4-abdd-45de-87e1-06f1cda34cda 3971 ? Sl 1:13 \_ xfce4-panel --display :0.0 --sm-client-id 2c36722ba-067e-4ae0-8417-a8245488ea39 <====== 3986 ? Sl 2:39 | \_ /usr/lib/xfce4/panel/wrapper-2.0 /usr/lib64/xfce4/panel/plugins/libwhiskermenu.so 1 16777223 whiskermenu Whisker Menu Show a menu to easily access installed applications 3991 ? Sl 18:15 | \_ /usr/lib/xfce4/panel/wrapper-1.0 /usr/lib64/xfce4/panel/plugins/libmultiload.so 15 16777224 multiload Multiload A system load monitor that graphs processor, memory, and swap space use, plus network and disk activity. 3992 ? Sl 20:09 | \_ /usr/lib/xfce4/panel/wrapper-2.0 /usr/lib64/xfce4/panel/plugins/libpulseaudio-plugin.so 6 16777225 pulseaudio PulseAudio Plugin Adjust the audio volume of the PulseAudio sound system 3993 ? Sl 0:28 | \_ /usr/lib/xfce4/panel/wrapper-2.0 /usr/lib64/xfce4/panel/plugins/libxfce4powermanager.so 13 16777226 power-manager-plugin Power Manager Plugin Display the battery levels of your devices and control the brightness of your display 3995 ? Sl 0:02 | \_ /usr/lib/xfce4/panel/wrapper-2.0 /usr/lib64/xfce4/panel/plugins/libsystray.so 7 16777227 systray Notification Area Area where notification icons appear 3982 ? Sl 0:00 \_ Thunar --sm-client-id 2dfa4a24a-8d69-4a3d-a93d-5f51febf0e5e --daemon cer@Isengard:~> uptime 13:32:22 up 12 days 9:36, 5 users, load average: 4.56, 4.13, 2.81 How can it be? - -- Cheers Carlos E. R. (from 15.2 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCYEoO1xwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVhFwAn0XgAg1KtZqP1FSQdgAK OQ5hNRhGAKCSL32uSBCbbYc4QxjjPAdXo4HtzQ== =8ukM -----END PGP SIGNATURE-----

6 10

Upgrade from Leap 15.1 to 15.2 Desktop Failure
by Jim Flanagan 30 Jun '21

30 Jun '21

Greetings, Just did an upgrade from my stable Leap 15.1 install to 15.2. I downloaded the DVD and did the upgrade from booting that. It asked me if I wanted to used the online repos as I have an internet connection so I said OK. Everything seemed to go well and booting into my KDE desktop. But clicking the gecko start menu gives an error. "Error loading QML file:file///sur/share/plasma/plasmoids/org.kde.plasma.kicker/contents/ui/main.qml:27:1: module "org.kde.plasma.private.kicker: is not installed" The system is running and I see my desktop widgets doing their thing. But I can't do anything. I can get to tty1 and login as root but I don't know what to do from there. I tried running yast in tty1 but get errors when I try software management. This system was first installed with Leap 15.0, upgraded to 15.1, now to a partially broken 15.2. Any suggestions most welcome. Jim F

9 79

Leap 15.3 RC Gnome and Tumbleweed XFCE: Logitech Marble Mouse not working (40-libinput.conf missing)
by Peter McD 27 Jun '21

27 Jun '21

Hi, I have been using a Logitech Marble Mouse trackball and a Logitech optical mouse with Leap 15.2/KDE for quite a while. Trackball left-hand-mapping, and an optical mouse right-hand-mapping (one computer, two users) I left the the optical-mouse-setting as it came with the system, and added for the trackball the configuration below. Works the way I like it. /etc/X11/xorg.conf.d/40-libinput.conf in Leap 15.2/KDE-Plasma ---------------------------------------------------------------- Section "InputClass" Identifier "Marble Mouse" MatchProduct "Logitech USB Trackball" MatchDevicePath "/dev/input/event*" Driver "libinput" # default button assignments. # Option "ButtonMapping" "1 2 3 4 5 6 7 8 9" # right-hand-mapping # Option "ButtonMapping" "1 8 3 4 5 6 7 2 9" # left-hand-mapping Option "ButtonMapping" "3 8 1 4 5 6 7 2 9" Option "ScrollMethod" "button" # Option "ScrollButton" "8" Option "ScrollButton" "9" # Option "MiddleEmulation" "on" # use instead Buttonmapping "3 8 1 ... 9" EndSection ---------------------------------------------------------------- But not so with Leap 15.3 RC Gnome or with the current Tumbleweed XFCE. It seems that /etc/X11/xorg.conf.d/ is not used except for a keyboard-configuration file in Tumbleweed XFCE. It is still there in Leap 15.3 RC KDE-Plasma. How could I get the trackball functionality in Tumbleweed XFCE? Peter

3 6

Packman and certificates
by Roger Oberholtzer 02 Jun '21

02 Jun '21

If I download a package from Packman and install it directly, I get this warning: libvo-amrwbenc0-0.1.3-pm151.1.4.x86_64 (Plain RPM files cache): Signature verification failed [4-Signatures public key is not available] Of course if I add the repository this is all managed. But if I want to just install the RPM direct, is there a package with the certificates that I can install so this message is not given? -- Roger Oberholtzer

6 8

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

openSUSE Users May 2021