Reading some mails on the GIMP mail list, I ran across the procedure
to install some more fonts for not only Gimp, but the system and
StarOffice to use also. Well, I installed the fonts, went to the
shell and issued the command xset fp+ <font directory> and then the
rehash command and all fonts are there! Ok, that went well, but each
time I restart the system, I have to do it all over again? Is there
a way to make it permanent and read the new fonts like it does the
ones the system installs or is that a no-no?
end of line
xset fp+ <new font directory>
xset fp rehash
---KMail 1.2--- SuSE Linux v7.2---
Registered Linux User #225206
/tracerb(a)sprintmail.com/ *Magic Page Products*
*Team Amiga* http://home.sprintmail.com/~tracerb
I don't remember seeing this problem on the list.
KMail print on screen is clear and most letters are
separated. When I print out a mail, some letters,
particularly the "t", the "si" and the "sk" combinations
are scrunched together with adjoining letters.
I am printing to an HP 2200D laserjet. The
typeface on screen (and on paper) is a
sans-serif font. Even on screen, it is slightly
scrunched in spots. "ri" and "ti" and "tt" and "th" are
too close together.
I have been trying to get a tarball of transcode to compile on my SUSE
9.2 system. Every pkg I have d/l'd from the sites listed on the
Transcode Wiki page:
are unopenable. Every one, including the beta versions. Have I made one
of those embarrassing newby errors? Konqi Filemgr says :
"The file does not exist" even tho it lists it.
Is there a location for a transcode I can open and compile?
p.s. The pkgs are unopenable on my SUSE 8.2 sys also
Proud SUSE user since 5.2
Loving SUSE 9.2
My BLOG == http://vancampen.org/blog
While attempting to stop a video playing on Macro Media Flash Player 7,
I managed to lock out everything. I could not move the mouse cursor,
the arrow keys and the rest of the kb didn't work, ctl-alt-del did nothing.
None of the function keys did anything. (The video was something downloaded
from the 'net via Firefox.) I wound up pulling the big switch, as us hams
like to say. Is there anything else I could have done?
I'm trying to put Linux to practical use, and this is the first time I've seen
10.0 crash, so it's good, but not fool-proof. (If something can be broken,
this fool will break it!)
good idea - please see here:
Hope this is detailed enough...
BTW, thats my first wiki entry ever...
Am Sonntag, 24. April 2005 22:36 schrieb Richard Bos:
> Op zondag 24 april 2005 23:36, schreef Sven Haberer:
> > If desired, I could post a short description how I did this...
> If you can put it own the wiki (http://www.susewiki.org): than we can all
> maintain it.
> Richard Bos
> Without a home the journey is endless
I have a 4-year old DELL desktop with a heavy CRT monitor that I'm going
to give away soon .
I also have a 2 month old laptop. Both computers run Linux/SuSE.
I would like to buy an external disk to save most of my s/w
development now residing on my old desktop.
But I would like to be able to use it also with my laptop.
Both computers have some USB ports so I daresay an external USB disk
would be fine ..
I'd appreciate some suggestion about a USB reliable, large capacity but
portable, external disk or
any alternative solution.
Thank you in advance.
I have a fileserver running SuSE 8.0 with 2 IDE Drives and a
SCSI RAID (RAID5). The system boots up to one of the IDE drives,
and the SCSI RAID drive runs as a mounted filesystem (/dev/md0).
(all filesystems are REISERFS).
The SCSI RAID drive has crashed (won't boot up), and I need to
recover it (repair it, through some utility).
The software does not seem to want to mount the disks, even though
the SCSI BIOS (Adaptec) recognizes the disks, and they are listed as
I tried to repair the disk(s) (with reiserfsck), but it produced an
reiserfs_open: bread failed reading block 2
reiserfs_open: bread failed reading block 16
reiserfs_open: neither new nor old reiserfs form found on /dev/md0
The literature suggested that this error message is hardware related
(either a disk is physically damaged, or maybe the RAID isn't
recognized), but again, the disks are recognized (and therefore,
so is the SCSI Card).
I tried to boot up with SuSE CD 1 in Recovery mode, but not sure
what to do there (i.e., after the root prompt - just run reiserfsck?).
Literature suggests there are plenty of tools to handle disk recovery,
and especially RAID support, I can't find reference to them
The installation of the RAID was trivial (using the YAST2
partitioning GUI window on startup), and yet recovery seems to be a
mystery. This can't be right.
Does anyone know where there are "decent" and "usable" recovery tools?
OR ... does anyone know what "specifically" to do in this case? Can
I re-partition without formatting, and recover the existing data?
Any help is appreciated - I'm sure I'm missing something "obvious", but
can't find "obviously" what to do in the literature, docs, etc.
School of Engineering and Applied Science
University of California, Los Angeles
Linux Magazine (Linux Pro in the US) has a 4 page review of the 9.3
release in the June 2005 issue, pgs 44-47.
"Novell's Suse Linux 9.3 is a feature-rich, and robust Linux
distribution. At first glance, the new version does not seem much
changed from 9.2, but a lot of work has gone on under the hood. The
distribution is definitely good for new users.
If you already have Suse Linux 9.x or a similarly recent system, the
update is only worth the effort if you are unhappy with your current setup.
If you use external media on a regular basis, the update is definitely a
good idea. . . . "
David C. Johanson
Linux Counter # 116410
Powered by SuSE Linux 7.3
People who behold a phenomenon will often extend their thinking beyond
it; people who merely hear about the phenomenon will not be moved to
think at all. -- Goethe
A new AMD64 bit machine, new SUSE 9.3, should be heaven.
Machine hangs after a few minutes of use, but I can't tell why.
I hope someone recognizes a problem part so I can address it.
Motherboard: Asus A8V-E includes:
Disk controller: VIA SATA and IDE drives
Network: Marvell Yukon 88E8053 PCI-E gigabit
sound, usb, firewire on board
CPU: AMD Athlon64 XP3500+
Graphics: Gigabyte PCI-Express 6600GT (NX66T128D)
WinXP: Embarassingly stable.
SuSE9.3 (64bit) crashes
Fedora Core 4 64-bit crashes
DamnSmallLinux (embedded under XP with QEMU) stable!!!
Obviously SuSE is my choice. I keep trying online update, hoping that the
system will stay up long enough to complete and that a fix is coming.
Some weeks ago I inquired here about assistance for those who have difficulty
seeing, as I am one, at present. I am effectively blind in the left eye and
have cataract in the right. Some of this may be ameliorated in the future,
some will probably not be. Nothing came back at all.
The font in K-Mail out-going is about 8 point on my 17" screen, as is the
font on the message names for the incoming mail. I have not been able to
change this, altho the actual incoming message font I was successful in
I do not have access to my Windows machine at present, due to mechanical
failure, and this is the only way I have to communicate. Is there no way
to make SuSE Linux friendly to optically-challenged users?
Please, someone, reply.