Before I do research on how to do this, it is possible to do this right,
> on a 2 drive box, with SUSE 8.0 on 1 drive, Debian and 98se splitting
> the other? I'm already dual booting fwiw..
>
> Thank you for your time.
Speaking of time, please check yours. Your email showed up with a date of
March 2, 1999...
Thanks,
Stan
Yes, I'm a time traveler you see, I'm only in this time segment now to check
on a few stock investments I had in mind...thanx for the tip Stan..
Lee :-)
Before I do research on how to do this, it is possible to do this right, on a
2 drive box, with SUSE 8.0 on 1 drive, Debian and 98se splitting the other?
I'm already dual booting fwiw..
Thank you for your time.
I would be thankful for answers to some questions: about wireless cards
1) Re: Wireless Ethernet Cards for Desktops.
How does one get Linux to recognize an ethernet card (e.g. a wireless card)
that is not on the list of supported cards shown by YAST2?
2) Re: Installing a PCMCIA card onto a Desktop.
I understand that one can install a wireless PCMCIA ethernet card in a
desktop with the appropriate PCI card. Is there any problem with Linux's
recognizing the card under these circumstances?
Under Linux 8.0, is there any problem with recognition and use of a wireless
PCMCIA? I read the relevant HowTo, but that installed under Debian and I
think (guess) an older kernel.
Thanks
--
dj tuchler
dtuchler(a)earthlink.net
"No installation data found on medium"
"Could not mount the source medium"
Previously I was alawya able to use the orginal YaST to do hard drive
installation, I was never able to get YaST2 past the above errors, if I exit
YaST2 and start YaST everything works fine. It has always been this
way for me and I didn't mind as I like using YaST. However, I am told that
version 8.0 will no longer have YaST.
Does anyone know if version 8.0 of SuSE pro will allow paying customers the
right to copy the installation disks to their hard drive and do a complete
installtion and further updates directly from the hard drive?
If I have been skipping something, please let me know, it has been a while
since I installed 7.3
my curent SuSe distro installation disks are on my /hda11/7.3
thanks in advacne
joe
Hi all,
I have just tried to access my USB 250 Zip drive in SUSE 7.3 Pro, only to
receive the following message:
"Could not mount device. The reported error was mount /dev/sda4: unknown
device."
I have checked and ziptool is installed, I have a Zip icon on my desktop, but
obviously, something needs to be configured somewhere.
I read /usr/share/doc/packages/ziptool/README, but there wasn't any help as
far as I could decipher. Any ideas?
Cheers,
Brian
Hi,
Last night i posted message asking on help to aviod my system shutdown
by it self.
Well put statement suggested in lilo.con in the appriate localtion
suggested but jut know the system in question just power off again for
no good reason.
I am running SuSe 7.1 Kernel 2.4.13 Mantel RPM.
512 MB RAM
10 GB (ReiserFS / ext2 /boot)
Matorx Millimum 2 MB (It's work machine )
D-Link 538 TX+ 10/100 MB
What noticed this occurs when memory drop below 350 MB the system
shutdown when i am going in to X/Gnome.
What i find strange is i am running RH 7.1 + Kernel 2.4.13 Kernel.org
with exact same MB/RAM/HD/NIC etc.. and all it well with it.
I have had this problems since kernel 2.4.0 .
I have checked RAM with memtest and it check out i have switched ram
from RH 7.1 Box with this one done memory test as well it check out but
still occurs.
I have always love SuSe but seriously thinking of calling it quit's with
this distro.
I never any problems with other distro/kernels acting like this.
Any ideas :)
Alex :)
Hello:
I have been unable to find the package "hardsuse" that is supposed to
contain the script "harden_suse" in series "sec". I have looked on both
the 7.1 and 7.2 cds, and on the SuSE ftp site (for 7.1). Can anybody
tell me where else they might be?
Also, is sftp, in package OpenSsh with 7.2, available in 7.1? I cannot
find it there. (I want to get my new 7.2 installation up and running
before I upgrade my 7.1 installation, but need to transfer files between
the two machines securely.)
Thanks in advance,
George
--
George H. Griffin Powered by SuSE Linux 7.1, kernel 2.4.2
"Always believe your observations, not your theories
(no matter how near they may be to your heart) if the
two are in conflict!" John Gribbin
Hello all readers,
I have a epson stylus color 440 printer.
I can print ok in Black but not in color any help appreciated.
I'm using Suse 6.2
Peter
--
To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com
For additional commands send e-mail to suse-linux-e-help(a)suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hi everyone.
Just upgraded to 6.3 and found that all our type1 fonts had been lost from
Staroffice. Fortunately they remanined intact in /usr/X11R6/lib/X11/fonts/Type1
but we had to do a type1inst in that directory to get the fonts.scale file back
then xset fp rehash in KDE and then reinstall them in each user's
installation. I think that this may help the poster of a font question earlier
on which I just deleted. Naughty.
Best wishes from Steve at FeF, Spain.
--
To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com
For additional commands send e-mail to suse-linux-e-help(a)suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/