June 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Kernel compilation the openSUSE way?
by Bjoern Voigt 28 Nov '21

28 Nov '21

I usually take the newest openSUSE kernel (from repository Kernel_stable). But since some month I have a DVB T2 HD card, which requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171). So I need to compile kernels myself. I have a working compilation path. But the current path has 12 steps! It takes some time. I wonder, why it is so complicated to configure, compile and install a Kernel under openSUSE. Is there a better/easier/automated way to configure, compile and install a Kernel under openSUSE? I know this blog article. But the article uses Vanilla kernels and also needs 6 steps. With additional patches (4 steps), third-party modules (2 steps) and cleanup (1 step) the article would also need 13 steps: Compiling the Linux Kernel, the SUSE way https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/ This is my Kernel configuration, compilation and installation path: 1. Update kernel-source and kernel-default from Kernel_stable repository 2. Save kernel-source: cp -a /usr/src/linux-4.x.y-... /usr/src/linux-4.x.y-my 3. Apply my patches cd /usr/src/linux-4.x.y-my patch -b -p1 < ~myuser/.../my-kernel-patch.patch 4. Copy standard configuration: cd /usr/src/linux-4.x.y-my cp -v /boot/config-4.11.4-1.gcba98ee-default .config 5. Edit .config: remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT remove some hardware-dependent settings 6. edit configuration interactively: Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise "make binrpm-pkg" creates huge kernel binaries. make oldconfig [...] Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1 * * Configure standard kernel features (expert users) * Configure standard kernel features (expert users) (EXPERT) [N/y/?] (NEW) Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW) make menuconfig Do some additional configuration. 7. Compile kernel (-j4 for four processor cores, ionice and nice to reduce the load, binrpm-pkg for RPM without source-RPM) make clean nice ionice -c idle make -j4 binrpm-pkg 8. Install the kernel RPM package rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm 9. Install necessary symbolic links for "dkms" cd /lib/modules/4.x.y-my1 ln -sv /usr/src/linux-4.x.y-my source ln -sv /usr/src/linux-4.x.y-my build 10. Update third-party modules (e.g. Nvidia driver): dkms install -m nvidia -v 375.66 -k 4.x.y-my1 11. Cleanup cd /usr/src/linux-4.x.y-my make clean 12. Select Grub configuration and reboot grub2-once --list | less grub2-once 2 reboot Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

[opensuse] oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"
by ellanios82 11 Aug '19

11 Aug '19

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] Mapping and re-mapping Keyboard Keys
by Paul Groves 14 Mar '19

14 Mar '19

On 27/06/17 12:22, Paul Groves wrote: > > On 27/06/17 08:34, Aaron Digulla wrote: >> xmodmap -pke | less > > These keycodes do not seem to match the system. For example in the > output of this command it says: > > keycode 158 = XF86WWW NoSymbol XF86WWW > > I ran setkeycodes e020 158 > > When I press the e020 (Internet) button xev says I have pressed code > 166 (Back button). > > How on earth has this happened? I specified 158 not 166. What have I > done wrong? > > Just been emailed this link: https://unix.stackexchange.com/questions/49650/how-to-get-keycodes-for-xmod… To quote this article: Here you can see keycode 97 is unused on my system: |keycode 94 = less greater less greater bar brokenbar keycode 95 = F11 XF86Switch_VT_11 F11 XF86Switch_VT_11 keycode 96 = F12 XF86Switch_VT_12 F12 XF86Switch_VT_12 keycode 97 = keycode 98 = Katakana NoSymbol Katakana keycode 99 = Hiragana NoSymbol Hiragana | The keycode X uses and the keycode the kernel uses are OFF BY 8 for "historical reasons". So take 97 - 8 = 89 and use 89 with the setkeycodes command (again as root): So to make my vol - button work (xmodmap keycode 122 -8 = 114) setkeycodes e01e 114 This has worked! I have re-mapped apl the buttons apart from my hotkeys. >> No but there are lots of uncommon keycodes which you can use. For >> example, F13-F35 or KP_F1...KP_F4. > > In the output of the command xmodmap -pke | less there are no codes > for F13-F35 or KP_F1 etc > > I would like to set HK1 - HK4 to F13 - F16 How do I find the keycodes > for these buttons Still looking for the keycodes for F13-16 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 19

[opensuse] IPv6 Rogue Router Security Issue
by Lew Wolfgang 30 Dec '17

30 Dec '17

Hi Folks, There seems to be a flurry of IPv6 talk going on, maybe this is time for me to bring up the rogue router problem again? I asked about this a couple of times over the years but could never find anyone to comment on it. First, here's the RFC that describes the problem: https://tools.ietf.org/html/rfc6104 Rogue routers have affected me personally at a customer's site. This is a large, professionally managed, dual-stacked network with a number of v4 class B addresses and thousands of hosts. Subnets seem to be /20 CIDR in size, so there are plenty of "neighbors" on any given subnet. I've encountered the situation where misconfigured Windows systems will advertise themselves as an IPv6 router. They then happily accept traffic and drop it all silently on the floor. This problem doesn't seem to bother other Windows boxes too much, but it absolutely kills SSH connections. SSH preferentially tries IPv6 port 22, which when sent to a dumb Windows box results in very long hangups and connection failures. My workaround for my cohort of Linux desktops and servers was to disable IPv6 for both ssh and sshd. This will work for as long as the host network supports dual stacks, but eventually? Then there's the issue of intentional MITM attacks using this vector. If a bad actor has physical access to a subnet, or has compromised a host on that subnet, your goose is cooked. This link mentions some mitigations, but they're quite technical and may require hardware support. https://community.infoblox.com/t5/IPv6-Center-of-Excellence/Holding-IPv6-Ne… So, what is the threat to a home IPv6 user who has WiFi and an Internet of Things with minimal/non-existent security? I personally feel safer behind a nice natted IPv4 firewall with ACL rules between my copper and WiFi subnets. I just feel that I have more control of the situation with a simpler network. Has SUSE addressed this issue? Tell me I don't have to worry about it! Regards, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 67

[opensuse] Again, trying to find a suitable video editor.
by Carlos E. R. 02 Dec '17

02 Dec '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I simply can't find a suitable video editor that works. My goal is to extract the interesting parts of a TV recording. Ie, mark the start of the movie, the end, the commercials inside, and dump all that into a single file, perhaps recoding. One limitation is that movies here have two sound tracks, one in Spanish, and the other one in the original language, typically English. I want to keep both, obviously. I don't need any transition or effect, just a simple editor that allows me to remove unwanted sections. I have tried: pitivi - crashes on start LiVES - works for an hour at 100% CPU and can't load the file. dvbcut - says my mpeg file is not a video (and it certainly is!) tragtor - can convert, but not edit. openshot - almost. My video has two sound tracks, and this tool ignores the second track. cinelerra-cv - I can't make head or tails of it. I tell it to load a video file, it does, but then I don't see how to do anything. It doesn't even display the video. I may have to read the manual, but I dislike having to read a manual for a GUI. Still... kdenlive - Well... crashes too often. I can mark the cuts, but it does not display what I'm cutting. And only one sound track. HandBrake - no edit. Avidemux - one sound track only. Kino - abandonware. Lightworks ?? Shotcut - Segmentation fault on start. cer@Telcontar:~/Videos/Fusion/trabajo> shotcut QSqlDatabase: QSQLITE driver not loaded QSqlDatabase: available drivers: QMYSQL QMYSQL3 QSqlQuery::exec: database not open QSqlQuery::exec: database not open Database::Database(QObject*) Failed to get version. QSqlQuery::exec: database not open bool Database::upgradeVersion1() Failed to create thumbnails table. Database version is 0 Segmentation fault cer@Telcontar:~/Videos/Fusion/trabajo> Flowblade ?? I don't understand the tool. May need some reading. At least it runs. I would like something that would produce a command line to ffmpeg in a GUI. Then I could modify further the options. This would be ideal. tragtor works this way, but has no editor. - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlbbJ80ACgkQtTMYHG2NR9UmagCeK8UbAAz5/lAjBvscdhzBuxtb WUQAn2jmzoy7810hldN4WwVWQktgVp2g =muqW -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

28 199

[opensuse] Tape Drive Trouble
by Paul Groves 01 Sep '17

01 Sep '17

Hi, I have 4 tape drives in my server and I am lately experiencing a few problems. One night a backup failed with rmtio failed: Input output Error. I ran it again and it worked. This has happened more and more frequently and now the drive fails writing every time with this error. I put the drive (Hp storageworks Ultrium 920) in another server. It works fine. I have just received a storageworks ultrium 1760 drive today. Same problem is occuring. The easiest way to make the error come up is to try mt -f /dev/st3 erase The drive sounds like it erases the tape, then the tape is unloaded and goes back in again automatically. Then it erases it again, then does it again then again and again then eventually it gives up with the message mt: /dev/st3: rmtioctl failed: Input/output error Can anyone enlighten me, what exactly is an mt: rmtio: Input/output error and how can I diagnose where exactly this error is occuring. I have tried disconnecting all other drives on the SCSI bus and only connecting the one scsi drive. I have also tried a different scsi connector on the same cable (which is where another drive that works fine is usually connected). I thought could this be a fault with the cable or the controller? But why would the other 3 drives work fine? Then I thought but if the problem is with my two drives why do they both work in another server? I have also tried connecting one of my working drives to each SCSI connector on the cable in turn and it works fine on every one of them, so surely it is not the SCSI controller or cable? Answers to the obvious: The drive jumper pins are correct I do have a terminator on the end of the SCSI cable I have tried more than one tape I have ran several cleaning cartridges in each drive. There are no error LEDs on the drives I have already tried turning it off and on again :) Please can anyone assist with this? I am completely stumped. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 113

[opensuse] mailto links not on top
by Dave Howorth 21 Jul '17

21 Jul '17

When I click on a mailto link on a web page the compose page opens UNDER other windows. Sometimes I can't see it at all. This is very annoying and different to how the world used to be. But I don't know what has changed, so I'm asking here first to see if anybody has any ideas. My browser is Firefox 52.1.1 My MUA is Claws Mail 3.13.2 My OS is Leap 42.2 both applications are the standard versions from the openSUSE repositories. Any help gratefully received, Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] nothing provides appdata(vmware-player.appdata.xml) needed by application:VMware Player-.noarch
by Carlos E. R. 21 Jul '17

21 Jul '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 This one is new: #### YaST2 conflicts list - generated 2017-06-14 11:39:45 #### nothing provides appdata(vmware-player.appdata.xml) needed by application:VMware Player-.noarch [ ] deinstallation of application:VMware Player-.noarch [ ] break application:VMware Player-.noarch by ignoring some of its dependencies #### YaST2 conflicts list END ### - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAllBBKUACgkQtTMYHG2NR9VVXACeOlUJ6s5OxINejaKm+KNnst/l Q7EAn3UpsZ+l3oD1ZS9yAJNNkrMlbaN8 =ZE3x -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4