openSUSE Users November 2007

users@lists.opensuse.org

406 participants
638 discussions

by Tracer Bullet

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

4 years, 11 months

HP Laser 1020

by Alfredo Cole

Hi: I just bought this printer, thinking it would work right out of the box. I'm running SUSE 9.3 with CUPS, and it does not seem to support this model. Anybody got this printer to work? Any pointers would help. Best regards. -- Alfredo Cole-Tuckler

11 years, 2 months

[opensuse] Re: [opensuse-factory] 10.3 Review

by Richard Creighton

Sid Boyce wrote: > http://www.mandrake.tips.4.free.fr/opensuse10.3.review.html > Mentions of "for the uninitiated" sounds about right. To sidestep any > problems with the DVD, I've installed from Factory. Looks like the DVD > should have been delayed until it was compared with Factory for > stability. > I think the reviewer attempted to be fair (he points to the URL to > show where he is coming from). Perhaps some pertinent pointers for 11.0. > Regards > Sid. http://www.mandrake.tips.4.free.fr/opensuse10.3.review.html should be MUST READING for management at Novell and at openSuSE.org. It is eminently fair and for the most part, accurate. I think any inaccuracies could be attributable to unfamiliarity rather than bias. If this reviewer hadn't been what I would call a 'Power-user', and had instead been someone converting from Windows, not only would they probably not have had a successful install, but would have an article that Microsoft would probably have printed in full page ads throughout the world. As it is, it should wake up Senior Management in SuSE. regards Richard -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 years, 8 months

[opensuse] SUSE SWAMP

by Ciro Iriarte

Anybody tried it?, is it actually being used on the Opensuse project?. Looks interesting.... Maybe it can replace workflow apps on Domino/Notes... Webpage: http://swamp.sourceforge.net/ SWAMP - The Workflow Platform SWAMP is a workflow processing platform. Workflows are processes with many people involved in many working steps. In a real world scenario these workflows are highly dynamic, but still many systems try to hardcode the business logic. That leads to raising efforts to adapt the system. Here is where SWAMP steps in: The workflow is designed in a XML based meta language in one file which is read by SWAMP. Workflows can be built from different workflow 'patterns' like simple actions, decisions, selections, loops, but also custom code and external events if required. SWAMP builds a HTML GUI from the workflow definition file that guides different users through the whole process, sends notifications if required, assembles overview pages over all running processes and much more. A SOAP interface can be used to integrate external systems into the workflow. These are SWAMPs main Features: * Support of many different workflow patterns * Flexibility in workflow design: A workflow can be specified in a single XML file * Workflow evolution: Workflows can be developed while in operation (versioning) * Ease of use: clear and straightforward XML based workflow definition language, no coding skills needed * Workflows can attach data and files * Automatic web-GUI generation for handling individual tasks and administrating workflows * Running on Linux + Windows with OS-independant tools: Java, Tomcat, MySQL * MySQL + LDAP authentication possible * User and Role management, workflows/tasks can be restricted * Mail notification system included * Unlimited amount of different workflow-types on one server * Scheduler to control time-critical workflow paths * SOAP interface allows interaction with external systems * Openness: Custom code allows unlimited functionality, event- and data gateways * Customizeable overview lists with filters -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

12 years, 3 months

[opensuse] ATI Drivers

by Vladimir Karpenko

I tried to install ATI ctcalyst driver VIA one click install, and it is not working. Log gives something like this: WW) warning, (EE) error, (NI) not implemented, (??) unknown. (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. (EE) fglrx(0): XMM failed to open CMMQS connection. Vied card is: ATI Radeon HD 3450 (RV620 95C5) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

12 years, 10 months

[opensuse] openSUSE contributor survey

by janfst＠student.matnat.uio.no

Hello, My name is Jan Fredrik Stoveland, and I am a masters student at the University of Oslo writing a thesis on firm-sponsored open source communities. openSUSE is the main case for the study. I have been granted permission to send you this email by the openSUSE management, and I hope you do not mind receiving it. I would like to ask all active members of this mailinglist to participate in a brief, anonymous electronic survey targeted at active contributors in the openSUSE community. So if you regularly post messages on this list to help other users, I would appreciate if you participate in the survey. Other users may participate too. The research is funded by the University, and is independent of any commercial interests. The link to the survey is here: https://nettskjema.uio.no/answer.html?fid=38823&lang=en The questions in the survey concern your current engagement in the openSUSE community, your reasons for participating in the community and your affiliation with Novell. I expect the survey will take you maximum 10 minutes to complete, unless you find any questions difficult to answer. What do you get in return for doing this? The results from the survey will be published on opensuse.org, and the thesis with other interesting findings about your community will be published around May next year. Hopefully this will be of interest to you. But first of all I hope you will contribute for the sake of research itself. Thank you very much for your help! Jan Fredrik Stoveland Student of Sociology and Informatics University of Oslo, Norway -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

13 years, 5 months

[opensuse] SLES9 and MySQL5

by Ciro Iriarte

Hi, anybody update an stock MySQL4 from SLES9 with a live database to MySQL5 from Build Service (http://download.opensuse.org/repositories/server:/database/SLES_9/x86_64/) Ciro -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

13 years, 6 months

[opensuse] Problem with zypper

by Jan Tiggy

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a problem with zypper. It doesn't refresh local repositories here. rpm -qa |grep zypper zypper-0.8.25-0.1 rpm -qa |grep createrepo createrepo-0.4.10-14 - - adding webpin-0.8-1.guru.suse103.i586.rpm to /srv/diverse - - evoking creterepo /srv/diverse - - evoking as root zypper ref: getting: zypper ref ... Repository 'diverse' ist aktuell. (is up to date) .... Alle Repositories wurden aktualisiert. After that still no luck with packet manager finding webpin-0.8-1.guru.suse103.i586.rpm But when I repeat this procedure couple of times then zypper finally recognizes the new repodata. Have you experienced similar while using zypper? - -- Cheers Jan cat /etc/SuSE-release openSUSE 10.3 (i586) VERSION = 10.3 uname -r 2.6.22.12-0.1-default zypper -v rl h_ttp://download.opensuse.org/update/10.3 h_ttp://download.nvidia.com/opensuse/10.3 ftp5.gwdg.de/pub/linux/misc/packman/suse/10.3 ftp5.gwdg.de/pub/opensuse/distribution/10.3/repo/oss/suse ftp5.gwdg.de/pub/opensuse/distribution/10.3/repo/non-oss/suse ftp5.gwdg.de/pub/opensuse/repositories/Emulators:/Wine/openSUSE_10.3 ftp5.gwdg.de/pub/opensuse/repositories/OpenOffice.org:/STABLE/openSUSE_10.3 ftp5.gwdg.de/pub/opensuse/repositories/KDE:/Backports/openSUSE_10.3 ftp5.gwdg.de/pub/opensuse/repositories/mozilla/openSUSE_10.3 ftp5.gwdg.de/pub/opensuse/repositories/KDE:/KDE3/openSUSE_10.3 ftp5.gwdg.de/pub/opensuse/repositories/GNOME:/STABLE/openSUSE_10.3 ftp5.gwdg.de/pub/opensuse/repositories/GNOME:/Community/openSUSE_10.3 ftp5.gwdg.de/pub/opensuse/repositories/X11:/XGL/openSUSE_10.3 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4-svn0 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFHToMfSXKkixf2bBcRAgXeAJ4rutoxMzgKw/WMqyYNpIN+TEiPFQCgsdV+ mO7lPKT7/S0h8lmnNBL8Zbc= =2DAa -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

13 years, 6 months

[opensuse] 10.3 and powermanagement

by Andreas

I am sure it is something very obvious, yet I can't seem to find a way to configure the powermanagement in openSUSE 10.3. YaST is missing the power-management module and in KPowersave all options are 'greyed out'. Any pointers? -- Gruß Andreas -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

13 years, 6 months

[opensuse] Finding bugs in OpenSuse Bugzilla - Mime Type Errors in Konqueror

by Philippe Landau

This problem exists since years and thousands struggle with it in different distributions: http://www.linuxquestions.org/questions/mandriva-30/could-not-find-mime-typ… In Konqueror file associations are incomplete in OpenSuse 10.3, so i changed .flv handling adding VLC to open those files (right-click on file, Properties, click icon after "Type:"). Since i get this error message popping up every time i hover above a .html file: "Could not find mime type application/octet-stream" Is it possible to search OpenSuse Bugzilla for a phrase ? I get over 200 results: https://bugzilla.novell.com/buglist.cgi?query_format=specific&order=relevan… Kind regards Philippe -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

13 years, 7 months

Jump to page:

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

openSUSE Users November 2007