February 2006 - openSUSE Users - openSUSE Mailing Lists

Bad blocks on a ReiserFS volume. How to retrieve files?
by Silviu Marin-Caea 14 Aug '24

14 Aug '24

I have a large hard-disk (120 GB) on which some blocks went bad. Now, it cannot be mounted. Attached is what debugreiserfs says. What can I do; I'm newbie to reiserfs architecture. I thought that ReiserFS keeps copies of the superblock or something, like ext2/3 does. reiserfsck says "error occured looks like hardware problem. bread cannot read block 13271040". That's the actual number it displays. PS I have asked the same question on the reiserfs-list, but it's extremely low traffic. Maybe someone here knows more. Thank you Filesystem state: consistency is not checked after last mounting Reiserfs super block in block 16 on 0x1642 of format 3.6 with standard journal Count of blocks on the device: 29945160 Number of bitmaps: 914 Blocksize: 4096 Free blocks (count of blocks - used [journal, bitmaps, data, reserved] blocks): 29154954 Root block: 14969 Filesystem is NOT clean Tree height: 4 Hash function used to sort names: "r5" Objectid map size 10, max 972 Journal parameters: Device [0x0] Magic [0x34ae2c74] Size 8193 blocks (including 1 for journal header) (first block 18) Max transaction length 1024 blocks Max batch size 900 blocks Max commit age 30 Blocks reserved by journal: 0 Fs state field: 0x0 sb_version: 2 inode generation number: 35482 UUID: 48d29ced-fe37-4c68-adf8-32ace9f2be45 LABEL: Set flags in SB: ATTRIBUTES CLEAN

3 4

Sorry SuSE: 9.1 is Waste of time and money!
by Terje J. Hanssen 17 May '24

17 May '24

I am sorry to conclude that my upgrade from SuSE 9.0 Pro to 9.1 Pro has been waste of time and money for me, so far. The same I have to say about the free SuSE "Installation support". The reason is that my SuSE 9.1 installation only detects 1 of my 3 SCSCI devices (as I wrote in another subject on this forum: http://lists.suse.com/archive/suse-linux-e/2004-May/3254.html) Yamaha 4416S CDRW recorder detected HP DVD Writer 100i NOT detected Epson 1640SU scanner NOT detected It's rather stupid. I have installed 9.1 using the DVD disk just in the HP DVD drive, but after the installation of 9.1, the KDE/Konqueror /media/recorder cannot access it and YaST2 cannot install additional software from it. Only one "Cdrecorder" is found in My computer and that is the Yamaha 4416 drive, which the KDE/Konqueror file manager assign as /media/recorder11. I am sure 9.1 is the reason, as I hadn't this problems with 9.0. I have tried both an update and two several new installation of 9.1. Neither SJDS nor Windows on the same multiboot PC have problems to detect these devices. In my opinion SuSE should therefore debug 9.1 better and longer, and not leave the problems to the customers. I see SuSE notes on their web saying that they know SCSI scanners are not detected in 9.1. But regarding my HP DVD writer problem, the SuSE support (as usual) don't take the responsibility and argue that this problem (a combination of IDE disk and SCSI devices) isn't included in their free installation support! This sounds remarkable, and I have never had a modern PC of so simple model or configuration that it has fitted the limited rules for the free installation support. Terje J. Hanssen

17 29

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

Adding fonts?
by Tracer Bullet 22 Aug '16

22 Aug '16

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

3 2

HP Laser 1020
by Alfredo Cole 08 May '10

08 May '10

Hi: I just bought this printer, thinking it would work right out of the box. I'm running SUSE 9.3 with CUPS, and it does not seem to support this model. Anybody got this printer to work? Any pointers would help. Best regards. -- Alfredo Cole-Tuckler

11 19

Problem with procmail
by Carlos E. R. 16 Jan '07

16 Jan '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm having a problem with some mails handled by one particular rule in procmail - all the rest are being handled ok. The .procmailrc goes like this: VERBOSE=on LOGFILE=$HOME/procmail.log ... cut :0 * ^Received: from correo.foo.es { :0 * ^Received: from (ruebert.ieee.org|engine.ieee.org|hormel3.ieee.org|boldfish.ieee.org|aries3.…) $HOME/Mail/in_ieee :0 * ^FROM_DAEMON $HOME/Mail/in_daemon :0 $HOME/Mail/in_foo } The problem is that mail matching the "^Received" clause above goes to the "/var/spool/mail/cer" folder instead of the "$HOME/Mail/in_foo" that corresponds. The log is this, showing a write error: procmail: No match on "^List-Id: <husky-discuss.lists.sourceforge.net>" procmail: Executing "/usr/bin/spamc" procmail: No match on "^X-Spam-Status: Yes" procmail: No match on "^^rom[ ]" procmail: No match on "^From.*FETCHMAIL-DAEMON(a)nimrodel.valinor" procmail: No match on "^To.*virusalert(a)nimrodel.valinor" procmail: No match on "^From.*(MAILER-DAEMON|postmaster)(a)nimrodel.valinor" ... procmail: Match on "^Received: from correo.foo.es" procmail: No match on "^Received: from (ruebert.ieee.org|engine.ieee.org|hormel3.ieee.org|boldfish.ieee.org|aries3.…)" procmail: No match on "(^(Mailing-List:|Precedence:.*(junk|bulk|list)|To: Multiple recipients of |(((Resent-)?(From|Sender)|X-Envelope-From):|>?From )([^>]*[^(.%@a-z0-9])?(Post(ma?(st(e?r)?|n)|office)|(send)?Mail(er)?|daemon|m(mdf|ajordomo)|n?uucp|LIST(SERV|proc)|NETSERV|o(wner|ps)|r(e(quest|sponse)|oot)|b(ounce|bs\.smtp)|echo|mirror|s(erv(ices?|er)|mtp(error)?|ystem)|A(dmin(istrator)?|MMGR|utoanswer))(([^).!:a-z0-9][-_a-z0-9]*)?[%@> ][^<)]*($.*$.*)?)?$([^>]|$)))" procmail: Assigning "LASTFOLDER=/home/cer/Mail/in_foo" procmail: Opening "/home/cer/Mail/in_foo" procmail: Acquiring kernel-lock So far, normal. procmail: Error while writing to "/home/cer/Mail/in_foo" procmail: Truncated file to former size A write error. What write error? procmail: No match on "^Received: from pop.tiscali.es" procmail: Extraneous locallockfile ignored .... procmail: Bypassed locking "/var/spool/mail/cer.lock" procmail: Assigning "LASTFOLDER=/var/spool/mail/cer" procmail: Opening "/var/spool/mail/cer" procmail: Acquiring kernel-lock procmail: Notified comsat: "cer@0:/var/spool/mail/cer" >From sombody(a)somewhere.com Wed Aug 31 20:17:13 2005 Subject: Final.... Folder: /var/spool/mail/cer 952289 I have copied over the emails in /home/cer/Mail/in_foo to another folder, then deleted, recreated in_foo, and finally copied back all the emails. The folder has 57Mb (392 emails) and Pine seems happy with it, no complaints. Ideas? - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFDFflQtTMYHG2NR9URAuBbAJ96DTk33WG7nb+BfwkIB40MTql0qgCffUW8 i7c5FLtIHFDl86hb4moJhu8= =k4MY -----END PGP SIGNATURE-----

5 16

GIMP will not start...
by Johnny Ernst Nielsen 27 Jul '06

27 Jul '06

Greetings, SUSE Linux 10.0 on an old pentium 400Mhz After the initial setup dialogs on first run, nothing happens. Subsequent starting attempts simply does nothing at all. I have tried "strace gimp 2> outdata.txt" It gives 2357 lines, of which the last 20 looks like this: read(4, "", 4000) = 0 close(4) = 0 gettimeofday({1137533030, 236061}, NULL) = 0 mmap2(NULL, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x411e4000 munmap(0x411e4000, 32768) = 0 mmap2(NULL, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x411e4000 munmap(0x411e4000, 32768) = 0 open("/home/hanne/.gimp-2.2", O_RDONLY|O_NONBLOCK|O_LARGEFILE| O_DIRECTORY) = 4 fstat64(4, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 fcntl64(4, F_SETFD, FD_CLOEXEC) = 0 getdents64(4, /* 23 entries */, 4096) = 720 getdents64(4, /* 0 entries */, 4096) = 0 close(4) = 0 mmap2(NULL, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x411e4000 munmap(0x411e4000, 32768) = 0 open("/home/hanne/.gimp-2.2/gimpswap.10230", O_RDWR|O_CREAT| O_LARGEFILE, 0600) = 4 close(4) = 0 unlink("/home/hanne/.gimp-2.2/gimpswap.10230") = 0 --- SIGILL (Illegal instruction) @ 0 (0) --- +++ killed by SIGILL +++ I am completely blank. Everything else on the computer runs just fine. Can anyone help? Let me know if you need more information, since I have no idea what may be relevant to solve the problem. Best regards Johnny :o)

3 11