In openSUSE 15.1, memtest, as installed, would not work with UEFI. Has
this been fixed in 15.2? There is a version on the memtest website that
will work with it.
tnx jk
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
SuSE Tumbleweed with newest updates and upgrades.
5.7.1-1-default #1 SMP Wed Jun 10 11:53:46 UTC 2020 (6a549f6) x86_64 x86_64
x86_64 GNU/Linux
Just recently started to give error messages when plugging in e.g. USB Headsets,
Arduino Uno into some Exsys USB 3.0 hub.
This was working fine in Tumbleweed before and in e.g. SuSE 13.1.
The error message is e.g.:
[...]usb 2-1.4.3: new full-speed USB device number 10 using xhci_hcd
[...]usb 2-1.4.3: New USB device found, idVendor=2341, idProduct=0043,
bcdDevice= 0.01
[...]usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[...]usb 2-1.4.3: Manufacturer: Arduino (www.arduino.cc)
...serialnumber...
[...]kernel: usb 2-1.4.3: Not enough bandwidth for new device state.
[...]kernel: usb 2-1.4.3: can't set config #1, error -28
This error message started on Jun 04, after making an
update (zypper up) on June 3rd.
A USB3.0 stick is working on the Exsys Hub.
The Arduino is working on some other USB 3.0 Port of another hub.
Regression?
Any hints how to get this away?
Found only another occurrence of this bug:
http://opensuse92.rssing.com/chan-20813128/all_p1407.html
Best regards
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
On a machine I did a "zypper dup" to update from 15.2 to 15.3, the 15.3
does not have sound at bootup.
Sound card is:
# lspci | grep -i audio
16:00.4 Audio device: Advanced Micro Devices, Inc. [AMD]
Starship/Matisse HD Audio Controller
The 15.2 works fine.
15.2:
#dmesg | grep -i audio
[ 0.502138] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 9.892740] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready
0x00000000
[ 9.894094] snd_hda_codec_realtek hdaudioC0D0: autoconfig for
ALC1150: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 9.894980] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 9.895870] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 9.896760] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.897662] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 9.897662] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.897663] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 9.897664] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 9.897664] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 9.912613] input: HD-Audio Generic Front Mic as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input4
[ 9.913543] input: HD-Audio Generic Rear Mic as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input5
[ 9.914476] input: HD-Audio Generic Line as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input6
[ 9.915416] input: HD-Audio Generic Line Out as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input7
[ 9.916344] input: HD-Audio Generic Front Headphone as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input8
On 15.3:
#dmesg | grep -i audio
[ 0.132048] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 5.112574] hdaudio hdaudioC0D0: Unable to bind the codec
Yet when I go into Yast and reconfigure the card, the sound works until
a reboot happens. What am I missing?
Mark
My new computer is an
HP 15s-eq2147 FHD RYZ5-5
16GB 512 SSD DOS
It has no cable connection to the internet, but only access via
WiFi. Installing Leap 15.3 was no problem, but so far I did not
manage to establish a WiFi connection.
Using Yast, I set up a wicked service with fixed address, getting
this list:
Device Name: wlan0
Configured with address 192.168.2.16/24 (acer.ariannuccia.zz)
Starting automatically on cable connection
I find it somewhat absurd that a cable connection is required even
for WiFi. Since I have no cable connection, I am looking for a work
around. Any idea?
The "Authentication Mode" offers these 5 options:
No Encryption
WEP - Open
WEP - Shared Key
WPA-EAP ("enterprise")
WPA-PSK ("home")
On my router (192.168.2.1) there are these "Encryption type":
Unencrypted (not recommended)
WPA2 (very secure)
WPA / WPA2 (secure)
WPA (secure)
For avoiding problems with the correspondence of these methods, I
have selected "No Encryption" on my computer and "Unencrypted (not
recommended)" on my router.
But the connection does not work. Any attempt to ping the router
from the new computer is rejected with the reply:
connect: Network is unreachable
Any help would be welcome.
Thank you in advance and best regards,
Wolfgang
I have been beating my head against smartctl for over two hours now. I cannot seem to get the command
"long" accepted, as the various tutorials explain. When I try to insert it, I get an error, like this:
linux1:~ # smartctl long /dev/nvme0n1
smartctl 7.0 2019-05-21 r4917 [x86_64-linux-5.3.18-57-default] (SUSE RPM)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
ERROR: smartctl takes ONE device name as the final command-line argument.
You have provided 2 device names:
long
/dev/nvme0n1
(It doesn't like "short" either.) And my typing is getting worse! It doesn't help that my drive is called /dev/nvme0n1.
As I mentioned earlier, the lightning strike has damaged something in this, my main computer, and I'm trying to
find out what. For those who missed the earlier post, the only thing I can connect to here is the internet. I cannot
see the printers or the laptop machine, and nmap basically doesn't work.
I started this quest at 11:30 PM and it's now 3:30 AM. I'm going to bed!
--doug
I usually take the newest openSUSE kernel (from repository
Kernel_stable). But since some month I have a DVB T2 HD card, which
requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171).
So I need to compile kernels myself. I have a working compilation path.
But the current path has 12 steps! It takes some time. I wonder, why it
is so complicated to configure, compile and install a Kernel under openSUSE.
Is there a better/easier/automated way to configure, compile and install
a Kernel under openSUSE?
I know this blog article. But the article uses Vanilla kernels and also
needs 6 steps. With additional patches (4 steps), third-party modules (2
steps) and cleanup (1 step) the article would also need 13 steps:
Compiling the Linux Kernel, the SUSE way
https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/
This is my Kernel configuration, compilation and installation path:
1. Update kernel-source and kernel-default from Kernel_stable repository
2. Save kernel-source: cp -a /usr/src/linux-4.x.y-...
/usr/src/linux-4.x.y-my
3. Apply my patches
cd /usr/src/linux-4.x.y-my
patch -b -p1 < ~myuser/.../my-kernel-patch.patch
4. Copy standard configuration:
cd /usr/src/linux-4.x.y-my
cp -v /boot/config-4.11.4-1.gcba98ee-default .config
5. Edit .config:
remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT
remove some hardware-dependent settings
6. edit configuration interactively:
Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise
"make binrpm-pkg" creates huge kernel binaries.
make oldconfig
[...]
Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1
*
* Configure standard kernel features (expert users)
*
Configure standard kernel features (expert users) (EXPERT) [N/y/?]
(NEW)
Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW)
make menuconfig
Do some additional configuration.
7. Compile kernel
(-j4 for four processor cores, ionice and nice to reduce the load,
binrpm-pkg for RPM without source-RPM)
make clean
nice ionice -c idle make -j4 binrpm-pkg
8. Install the kernel RPM package
rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm
9. Install necessary symbolic links for "dkms"
cd /lib/modules/4.x.y-my1
ln -sv /usr/src/linux-4.x.y-my source
ln -sv /usr/src/linux-4.x.y-my build
10. Update third-party modules (e.g. Nvidia driver):
dkms install -m nvidia -v 375.66 -k 4.x.y-my1
11. Cleanup
cd /usr/src/linux-4.x.y-my
make clean
12. Select Grub configuration and reboot
grub2-once --list | less
grub2-once 2
reboot
Greetings,
Björn
--
To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse+owner(a)opensuse.org
On Wednesday 03 July 2002 03:38, Michael wrote:
> I tried to visit this site.
> http://www.bet365.com
> The result upset me so much i sent them this.
I sent the letter below, and I encourage everyone on the list to send a
similar letter.
-----------------------------------------
Subject: Create a Real Web Site Please
From: Bryan S. Tyson <bryantyson(a)earthlink.net>
To: webmaster(a)bet365.com
When attempting to view your site using Konqueror 2.2.1 and Mozilla
0.9.4, both Linux web browsers, I was curtly informed that my browser
is "incompatible." Your site, sir, is what is "incompatible." Stick
with established standards and real html, not Microsoft proprietary
"features."
***************************************************
Powered by SuSE Linux 7.3 Professional
KDE 2.2.1 KMail 1.3.1
This is a Microsoft-free computer
Bryan S. Tyson
bryantyson(a)earthlink.net
***************************************************
We have an winNT server and need to auto mount a shared folder as if it were a
windose mapped drive Z: on SuSE8
Could someone please explain how to do this and how to make sure it is set-up
for every user everytime the system is booted.
Thanks
Regards
Keith Jacobs
New to Linux
Hello,
I got Tumbleweed Snapshot20210115 and wanted to install it on a rather old machine with a
software raid1 (UEFI raid).
On this raid some Windows 10 is already existing.
The installer of Tumbleweed Snapshot20210115 does not recognize this software raid1.
It only shows single harddiscs and no raid volume.
An older snapshot 20190704 is able to see that software raid1 but I cannot do any zypper
dup with that one
(this version was running previously before some hardware crash).
Any help for that - either a snapshot which can handle software raid1 or some way to set
zypper dup running again
with the older snapshot?
BR and thanks in advance
Markus
After the lightning bolixed up all the computers, I bought a cheap refurb that had Windows10 Home on it. I decided to make
a partition for OpenSUSE Leap 15.3. I used gparted to shrink windows and make a partition for Leap 15.3. I downloaded the
latest version and installed it. It seems to have wiped out Windows and created for itself something that must be related
to hell. Most of the apps that I could download and install on a version from last Fall are gone and unfindable, When I
placed the few that I could find on the desktop, when I rebooted they were gone. So was Windows.The only thing I could do
that remained was to get rid of the ugly stock desktop and replace it with something pleasant. I have used Linux for
almost 20 years, and I really don't understand Windows, on a partially working machine, or want to, but I'm having to use
it until I find a new Linux. WHAT HAVE YOU DONE? It's like KDE is GONE!
The folks here on the mailing lists have been more than helpful to me, and I am grateful to them, but now I will have to
find something--probably Mint with a KDE overlay--that I can live with. I will really miss the root version of Dolphin.
Written from a badly damaged Windows computer (that has a usable Leap 15 on it) but still reads and sends mail on an
ugly app from optimum.net. (Claws mail I never got to work.)
--doug