I tried to remove a repo using zypper, which I didn't want, and I think I might have accidentally removed an official one. Can anyone give me a list of all the repos I should have from a default TW install, please?
I'm really desperate now... got a new laptop Lenovo L15 AMD Ryzen 7 :)
really super in every way **except the WiFi** no matter what I try Leap
15.3 or Tumbleweed just can't get the WiFi going. I got the machine as
it is Ubuntu certified so thought should be ok. Googling seems to
suggest it works under Ubuntu, but no matter what I try just cant get
this WiFi going under openSUSE seems the driver from Realtek is up to
version 4.x but can't find any trace of it on openSUSE. FYI lspci and
lspci grep 8852
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8852
07: PCI 300.0: 0280 Network controller
[Created at pci.386]
Unique ID: svHJ.lTCK_+KOKi9
Parent ID: aYFK.1qAv6Us7QUA
SysFS ID: /devices/pci0000:00/0000:00:02.3/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Realtek Network controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8852
SubVendor: pci 0x17aa "Lenovo"
SubDevice: pci 0x4852
I/O Ports: 0x2000-0x2fff (rw,disabled)
Memory Range: 0xfd500000-0xfd5fffff (rw,non-prefetchable,disabled)
IRQ: 255 (no events)
Module Alias: "pci:v000010ECd00008852sv000017AAsd00004852bc02sc80i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)
I have got the driver from
but can't get modprobe to load it!!!
Anyone got any idea how to get this working?
Cheers and may thanks in advance,
Hey, so I been redoing my libvirtd servers and I notice that sshd_config
and ssh_config files are no longer in /etc/ssh
There are now ssh_config.d and sshd_config.d folders. I have to enable root
login because i have a master virt-manager that manages the other libvirtd
This new setup disables root access all together and I spent a few hours
trying to google how to re-enable root access.
I also need to know how to set my port back up on their special. Can
someone explain to me what I need to do, I figure it dropping in a config
into the folders.
Terror PUP a.k.a
Chuck "PUP" Payne
Discover it! Enjoy it! Share it! openSUSE Linux.
openSUSE -- Terrorpup
openSUSE Ambassador/openSUSE Member
skype,twiiter,identica,friendfeed -- terrorpup
Register Linux Userid: 155363
openSUSE Community Member since 2008.
Hi, I'm using Tumbleweed on RPi 4 and the gvim package is pretty hopeless. Not sure if this is related to the platform I'm running, or if it's just buggy. If any OpenSuse developers are reading this, please take note of the following:
1. The only gvim available in Tumbleweed repo is the one with Gtk3. The Gtk3 GUI is painfully jerky/laggy when scrolling lines of text. Debian for example, have Gtk2 and Gtk3 versions of gvim. Could someone please do the same for OpenSuse.
2. There is a really annoying bug with OpenSuse gvim. When I split the window vertically, there is no scroll bar visible on the right window, the left window has a correct scroll bar. This looks like a GUI bug of some sort, but it has been like this for quite some time now. Does anyone use gvim on Tubleweed and can confirm the same issue?
My USB-Bluetooth adapter can't pair with my bluetooth headset.
It worked in Leap 15.2.
The bluetooth assistant, i.e. the bluetooth applet searches for the
headset, but doesn't find it.
hwinfo (below) outputs much information, I hope I found the interesting
============ start debug info ============
libhd version 21.72 (x86-64) 
kernel version is 5.3
----- /proc/cmdline -----
root=UUID=adea8b9e-b878-4afa-89c9-337797cc8b56 splash=verbose noresume
----- /proc/cmdline end -----
77: USB 00.0: 11500 Bluetooth Device
[Created at usb.122]
Unique ID: POWV.nQKjiuCfL84
Parent ID: k4bc.kNaPe9SZft4
SysFS ID: /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-9/1-9:1.0
SysFS BusID: 1-9:1.0
Hardware Class: bluetooth
Model: "Cambridge Silicon Radio Bluetooth Dongle (HCI mode)"
Vendor: usb 0x0a12 "Cambridge Silicon Radio, Ltd"
Device: usb 0x0001 "Bluetooth Dongle (HCI mode)"
Driver Modules: "btusb"
Speed: 12 Mbps
Module Alias: "usb:v0A12p0001d8891dcE0dsc01dp01icE0isc01ip01in00"
Driver Info #0:
Driver Status: btusb is active
Driver Activation Cmd: "modprobe btusb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #86 (Hub)
I installed OS 15.3 on a Lenovo Ideapad Duet 3.
One problem is that the grub menu, all boot messages, the decryption
passphrase and the KDE-login screen are shown rotated (instead of up to
down the lines go left to right).
and also tried
They have no effect.
What else can I try?
Daniel Bauer photographer Basel Málaga
In an isolated environment I would like to avoid VMs accessing
Internet directly to grab updates. I'll probably create a local mirror
with The Foreman + Katello, but meanwhile I'll force the use of an
The proxy I'm using (embedded in OPNsense) allows dynamic whitelists,
where the firewall can grab the list from an URL. Are there official
repositories lists for OpenSUSE that I could use to feed it?.
I recently installed Leap 15.3 on my computers "hp" and "se"
Configuring the sound cards by yast worked on "se" only, whereas on
"hp" the following error message appears:
An error occurred during the installation of
GP107GL High Definition Audio Controller
The kernel module snd-hda-intel for sound support
could not be loaded. This can be caused by incorrect
module parameters, including invalid IO or IRQ parameters.
The same for the other sound card, called "Cannon Lake PCH cAVS".
How can I correct the kernel module snd-hda-intel and provide
correct module, IO, or IRQ parameters?
Thank you in advance for your help.
-----BEGIN PGP SIGNED MESSAGE-----
I received an email using this charset:
Content-Type: text/plain; charset="ibm850"
Thunderbird is unable to handle it right, accented letters (áéíóú plus ñÑ)
are displayed wrong, no matter what charset I choose in View/Text
Alpine displays it perfectly, no action needed.
Carlos E. R.
(from 15.2 x86_64 at Telcontar)
-----BEGIN PGP SIGNATURE-----
-----END PGP SIGNATURE-----
So I managed to have the touchscreen rotated, using
xinput set-prop pointer:'ELAN901C:00 04F3:2Bd6' 'Coordinate
Transformation Matrix' 0 1 0 -1 0 1 0 0 1
1) how do I make this setting permanent, so that it is applied again
after a fresh boot?
I've read to make a file like "50-touchscreen.conf" in
/etc/X11/xorg.conf.d/ but obviously I used a wrong syntax as I could not
login to the graphical system anymore after reboot.
If this is the way to go, can anybody point me to the correct syntax, or
tell me the correct way to make this setting permanent, please?
2) The Icon-Starters on the Desktop usually do not react (the don't get
marked nor start the desired app). All the other things work (I can move
windows, mark text, touch things in dolphin, firefox etc.).
However in one exception desktop-icon-touch works: When I first touch an
open window, and after that touch an icon, it works (app starts) as it
should. But /only/ if I first touch an open window, and only once,
directly after touching that window.
Daniel Bauer photographer Basel Málaga