September 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Kernel compilation the openSUSE way?
by Bjoern Voigt 28 Nov '21

28 Nov '21

I usually take the newest openSUSE kernel (from repository Kernel_stable). But since some month I have a DVB T2 HD card, which requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171). So I need to compile kernels myself. I have a working compilation path. But the current path has 12 steps! It takes some time. I wonder, why it is so complicated to configure, compile and install a Kernel under openSUSE. Is there a better/easier/automated way to configure, compile and install a Kernel under openSUSE? I know this blog article. But the article uses Vanilla kernels and also needs 6 steps. With additional patches (4 steps), third-party modules (2 steps) and cleanup (1 step) the article would also need 13 steps: Compiling the Linux Kernel, the SUSE way https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/ This is my Kernel configuration, compilation and installation path: 1. Update kernel-source and kernel-default from Kernel_stable repository 2. Save kernel-source: cp -a /usr/src/linux-4.x.y-... /usr/src/linux-4.x.y-my 3. Apply my patches cd /usr/src/linux-4.x.y-my patch -b -p1 < ~myuser/.../my-kernel-patch.patch 4. Copy standard configuration: cd /usr/src/linux-4.x.y-my cp -v /boot/config-4.11.4-1.gcba98ee-default .config 5. Edit .config: remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT remove some hardware-dependent settings 6. edit configuration interactively: Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise "make binrpm-pkg" creates huge kernel binaries. make oldconfig [...] Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1 * * Configure standard kernel features (expert users) * Configure standard kernel features (expert users) (EXPERT) [N/y/?] (NEW) Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW) make menuconfig Do some additional configuration. 7. Compile kernel (-j4 for four processor cores, ionice and nice to reduce the load, binrpm-pkg for RPM without source-RPM) make clean nice ionice -c idle make -j4 binrpm-pkg 8. Install the kernel RPM package rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm 9. Install necessary symbolic links for "dkms" cd /lib/modules/4.x.y-my1 ln -sv /usr/src/linux-4.x.y-my source ln -sv /usr/src/linux-4.x.y-my build 10. Update third-party modules (e.g. Nvidia driver): dkms install -m nvidia -v 375.66 -k 4.x.y-my1 11. Cleanup cd /usr/src/linux-4.x.y-my make clean 12. Select Grub configuration and reboot grub2-once --list | less grub2-once 2 reboot Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

[opensuse] oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"
by ellanios82 11 Aug '19

11 Aug '19

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] Mapping and re-mapping Keyboard Keys
by Paul Groves 14 Mar '19

14 Mar '19

On 27/06/17 12:22, Paul Groves wrote: > > On 27/06/17 08:34, Aaron Digulla wrote: >> xmodmap -pke | less > > These keycodes do not seem to match the system. For example in the > output of this command it says: > > keycode 158 = XF86WWW NoSymbol XF86WWW > > I ran setkeycodes e020 158 > > When I press the e020 (Internet) button xev says I have pressed code > 166 (Back button). > > How on earth has this happened? I specified 158 not 166. What have I > done wrong? > > Just been emailed this link: https://unix.stackexchange.com/questions/49650/how-to-get-keycodes-for-xmod… To quote this article: Here you can see keycode 97 is unused on my system: |keycode 94 = less greater less greater bar brokenbar keycode 95 = F11 XF86Switch_VT_11 F11 XF86Switch_VT_11 keycode 96 = F12 XF86Switch_VT_12 F12 XF86Switch_VT_12 keycode 97 = keycode 98 = Katakana NoSymbol Katakana keycode 99 = Hiragana NoSymbol Hiragana | The keycode X uses and the keycode the kernel uses are OFF BY 8 for "historical reasons". So take 97 - 8 = 89 and use 89 with the setkeycodes command (again as root): So to make my vol - button work (xmodmap keycode 122 -8 = 114) setkeycodes e01e 114 This has worked! I have re-mapped apl the buttons apart from my hotkeys. >> No but there are lots of uncommon keycodes which you can use. For >> example, F13-F35 or KP_F1...KP_F4. > > In the output of the command xmodmap -pke | less there are no codes > for F13-F35 or KP_F1 etc > > I would like to set HK1 - HK4 to F13 - F16 How do I find the keycodes > for these buttons Still looking for the keycodes for F13-16 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 19

[opensuse] Which distros for ReiserFS?
by Stevens 03 Apr '18

03 Apr '18

On the odd chance that I was ignored for possibly hijacking a thread, I shall start a new one but copy and paste my comments in hope of an answer: (re: Killing ReiserFS) I have been following this thread with some interest because of having been running ReiserFS since before he turned homicidal. I have had zero, count that ZERO, problems in all that time so I read with some dismay the effort to actively kill its usage in this whatever-you-call-it distro. I think that the more relevant question to ask is not "can we keep this file system around, pretty please" but "what distros are allowing its use by not actively trying to kill it"? I have used opensuse since before Mandrake went away, which has been a while and, although I don't really want to change distros, I am not married to suse (or leap, or whatever). I feel that what we have here with opensuse/leap is an example of the classic "swing" cartoon which shows the stages of project development from sales, engineering, installation and what the customer actually wanted. My need is not as complex as some and for that ReiserFS works quite well. So, my question remains, "If not suse/leap, then who"? Hopefully someone will know what distros allow the freedom to use whichever FS one wishes without running afoul of the FS nazis. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

22 99

[opensuse] IPv6 Rogue Router Security Issue
by Lew Wolfgang 30 Dec '17

30 Dec '17

Hi Folks, There seems to be a flurry of IPv6 talk going on, maybe this is time for me to bring up the rogue router problem again? I asked about this a couple of times over the years but could never find anyone to comment on it. First, here's the RFC that describes the problem: https://tools.ietf.org/html/rfc6104 Rogue routers have affected me personally at a customer's site. This is a large, professionally managed, dual-stacked network with a number of v4 class B addresses and thousands of hosts. Subnets seem to be /20 CIDR in size, so there are plenty of "neighbors" on any given subnet. I've encountered the situation where misconfigured Windows systems will advertise themselves as an IPv6 router. They then happily accept traffic and drop it all silently on the floor. This problem doesn't seem to bother other Windows boxes too much, but it absolutely kills SSH connections. SSH preferentially tries IPv6 port 22, which when sent to a dumb Windows box results in very long hangups and connection failures. My workaround for my cohort of Linux desktops and servers was to disable IPv6 for both ssh and sshd. This will work for as long as the host network supports dual stacks, but eventually? Then there's the issue of intentional MITM attacks using this vector. If a bad actor has physical access to a subnet, or has compromised a host on that subnet, your goose is cooked. This link mentions some mitigations, but they're quite technical and may require hardware support. https://community.infoblox.com/t5/IPv6-Center-of-Excellence/Holding-IPv6-Ne… So, what is the threat to a home IPv6 user who has WiFi and an Internet of Things with minimal/non-existent security? I personally feel safer behind a nice natted IPv4 firewall with ACL rules between my copper and WiFi subnets. I just feel that I have more control of the situation with a simpler network. Has SUSE addressed this issue? Tell me I don't have to worry about it! Regards, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 67

[opensuse] Big memory footprint: clamd
by Carlos E. R. 17 Dec '17

17 Dec '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, When I built my computer I put as much RAM as the board would allow, 8GiB. Today that is too little, but I can't add more. Telling 'mc' to sort by Resident memory, it shows: top - 22:44:32 up 28 days, 4:37, 4 users, load average: 0,26, 0,55, 1,02 Tasks: 521 total, 2 running, 517 sleeping, 0 stopped, 2 zombie %Cpu(s): 1,2 us, 0,6 sy, 0,0 ni, 97,3 id, 0,8 wa, 0,0 hi, 0,0 si, 0,0 st KiB Mem: 8174408 total, 7511580 used, 662828 free, 546440 buffers KiB Swap: 43744244 total, 1921984 used, 41822260 free. 3837656 cached Mem PID USER PR NI VIRT RES SHR SWAP S %CPU %MEM TIME+ COMMAND 20581 cer 20 0 3553104 1,266g 263636 0 R 4,088 16,24 3:52.94 firefox 3493 vscan 20 0 1376180 536972 10364 14548 S 0,000 6,569 11:27.15 clamd 19773 cer 20 0 1452508 309508 141740 0 S 0,000 3,786 0:05.72 soffice.bin 3874 root 20 0 1090892 226564 154380 217968 S 0,798 2,772 182:22.08 X 31344 cer 20 0 206044 87728 7404 1664 S 0,000 1,073 1:55.04 alpine 4176 cer 20 0 748016 56796 21004 17136 S 0,000 0,695 2:56.67 xfdesktop 20088 cer 20 0 829220 53820 4596 0 S 0,000 0,658 0:02.04 gnome-software 9835 cer 20 0 784100 40604 17784 36520 S 0,100 0,497 1:46.40 gnote 4207 cer 20 0 891040 38988 22504 18136 S 0,000 0,477 0:32.57 keepassxc ... The worst offender this moment is Firefox (Thunderbird is closed now). But the next is clamd (clamav, antivirus mail scanner daemon)! It is using more than LibreOffice! How can that be? It is iddle at the moment, doing nothing. What can be done to reduce its footprint? Instead of the daemon, I could call it from amavis, one process per mail. But this impacts scan speed. Could the daemon be started "on demand", and be killed a minute after the last email goes through? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlmGMxIACgkQtTMYHG2NR9UeCgCeNA+LGMhfhjS84U4h7EeEwlbT RhkAoIldf2vOQVms3CwHLc87ybN7vVDs =KoWk -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 30

[opensuse] Again, trying to find a suitable video editor.
by Carlos E. R. 02 Dec '17

02 Dec '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I simply can't find a suitable video editor that works. My goal is to extract the interesting parts of a TV recording. Ie, mark the start of the movie, the end, the commercials inside, and dump all that into a single file, perhaps recoding. One limitation is that movies here have two sound tracks, one in Spanish, and the other one in the original language, typically English. I want to keep both, obviously. I don't need any transition or effect, just a simple editor that allows me to remove unwanted sections. I have tried: pitivi - crashes on start LiVES - works for an hour at 100% CPU and can't load the file. dvbcut - says my mpeg file is not a video (and it certainly is!) tragtor - can convert, but not edit. openshot - almost. My video has two sound tracks, and this tool ignores the second track. cinelerra-cv - I can't make head or tails of it. I tell it to load a video file, it does, but then I don't see how to do anything. It doesn't even display the video. I may have to read the manual, but I dislike having to read a manual for a GUI. Still... kdenlive - Well... crashes too often. I can mark the cuts, but it does not display what I'm cutting. And only one sound track. HandBrake - no edit. Avidemux - one sound track only. Kino - abandonware. Lightworks ?? Shotcut - Segmentation fault on start. cer@Telcontar:~/Videos/Fusion/trabajo> shotcut QSqlDatabase: QSQLITE driver not loaded QSqlDatabase: available drivers: QMYSQL QMYSQL3 QSqlQuery::exec: database not open QSqlQuery::exec: database not open Database::Database(QObject*) Failed to get version. QSqlQuery::exec: database not open bool Database::upgradeVersion1() Failed to create thumbnails table. Database version is 0 Segmentation fault cer@Telcontar:~/Videos/Fusion/trabajo> Flowblade ?? I don't understand the tool. May need some reading. At least it runs. I would like something that would produce a command line to ffmpeg in a GUI. Then I could modify further the options. This would be ideal. tragtor works this way, but has no editor. - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlbbJ80ACgkQtTMYHG2NR9UmagCeK8UbAAz5/lAjBvscdhzBuxtb WUQAn2jmzoy7810hldN4WwVWQktgVp2g =muqW -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

28 199

[opensuse] Apache Start Up Problem
by Paul Groves 17 Nov '17

17 Nov '17

Hi All, I had a weird problem today. I noticed that after a reboot of my server, my owncloud instance on my desktop was complaining about an invalid certificate. I tried to 'open owncloud in browser' and was presented with my apache default page. So first thing I tried is restart the apache service. This fixed the problem. However, every time I reboot apache is not loading my configuration correctly and the problem repeats. It appears to be loading the default configuration file fine at boot but ignoring the other files. (including owncloud). But when I manually stop and start the service they load fine. Huh?? Any idea how I can diagnose what is causing this problem? What is the difference between the apache service loading at boot compared to manually starting the service? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 14