openSUSE Users June 2018

users@lists.opensuse.org

107 participants
126 discussions

by Joseph Comfort

A script that has worked for many generations of openSuSE fails under the LEAP 15 installation. The script ('ted') is located under /usr/local/bin. It reads: #!/bin/sh # Script for EDT look-alike ED v1.5.9 eddsk=/usr/local/ED-159 $eddsk/edc $eddsk/vt200.ed $eddsk/ed.setup 0 0 -1 -u $1 $2 $3 $4 $5 $6 $7 It is used for text editing. A command such as: 'ted filename' gives the error message /usr/local/bin/ted: line 7: /usr/local/ED-159/edc: No such file or directory But the file exists. The command 'dir /usr/local/ED-159/edc' yields -rwxr-xr-x 1 root root 214104 Sep 10 2006 /usr/local/ED-159/edc The directory chain and permissions are as they need to be. I have tried numerous variations and tests, but must be missing the one that will work. Yes, the code and script are pretty ancient. Was there some peculiar change to the shell (bash) code? Thanks Joe -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 9 months

[opensuse] No touchpad and keybord after upgrade to kernel 17.2

by Albert Oszkó

Hi all, I am just interested whether those on oS also met the problem in the subject. After about 2 weeks I switched on my ASUS K 501U laptop with TW and saw there were a massive number (nearly 3000!!) updates. It was not smooth to install them because in the meantime root got full. I deleted the elder snaphots (sudo snapper delete ---sync #snapshot) and installed the remaining more than 300 updates. Finally I tried to reboot, but neither touchpad nor keybord works on the 17.2 kernel. I could log in with the virtual keyboard and the mouse. Now I booted with 16.2 kernel which just works fine. So anybody met this, and has a remedy? Thanks, Albert

2 years, 9 months

[opensuse] Network manager does not restore same connection

by Carlos E. R.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, On return from hibernation, Network Manager doesn't restore the same connection that was active. I have two eth network configurations: one automatic, which is the default one, and one fixed, in which I define the address and other things. I'm using "Fixed", but if I hibernate and restore I get "wired connection 1", ie dhcp. I'm going to the undefine "wired connection 1" the setting "connect to this network when available", but then maybe it will not connect to anyone. [...] Confirmed, then I get "no connection". I may try to set both as default, see which one gets it... [...] Well, it was the "Fixed" one. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlsrZQIACgkQtTMYHG2NR9XydwCfbKg5kl7z+STQvt2vsh9xcC0I s74AnjIFYBG5ecKSdRkexICA9fu5WrCy =W5z/ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 9 months

[opensuse] Enabling an external display on a laptop that shows disconnected.

by don fisher

I am trying to discover how to enable an external monitor that I plug into my laptop. I am trying both 42.3 and 15. When I execute the xrandr command by itself is shows HDMI-2 disconnected. My laptop screen sometimes comes up as LVDS-1 unknown connection, where it certainly knew the connection when I started the system (should be connected primary) I have tried various xrandr commands advertised to work, the simplest being sudo xrandr --auto. After many hours on google I always find the xrandr --auto solution. The Opensuse system settings widget only shows one display and no options to probe for others. If I boot the system with the display attached it comes up correctly, so the monitor and cabling are good. Any suggestion would be greatly appreciated. Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 9 months

[opensuse] Re: [GTALUG] I not have a smaller phone, and therefor want it's big brother in a pad

by James Knott

On 06/25/2018 12:32 PM, D. Hugh Redelmeier via talk wrote: > It seems as if Android tablets were mostly a fad. Don't ask me why -- > I can never make sense of the market. > > T I often read books and news on mine. Use a browser, email and more. At work, we have an instrument for measuring RF leakage that displays on an tablet or phone. Watch some videos. I have a couple of apps for checking WiFi. Video chat. Lots of things. Until recently, I could use them to program my PVR, but Rogers broke that. I hear some people even use them for something called "Facebook". ;-) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 9 months

[opensuse] No packages found matching your search.

by Carlos E. R.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I go to <https://software.opensuse.org/>, type "rekall", find nothing (settings say 42.3). But it is here: <http://download.opensuse.org/repositories/KDE:/KDE3/openSUSE_Leap_42.3/x86_…> Why does the search fail? However, I do not find it for 15.0 :-( - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlsr/qIACgkQtTMYHG2NR9Wu1QCghCtp1TRvtET+BrcADHmZPIhi UDkAnA6pGkCq6hLTRDfp1Qm8sXVHLQVR =Yazk -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 9 months

[opensuse] yast2 over ssh

by Simon Becherer

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, tumbleweed, kde, x11: i recognized that i am not able to use yast2 over ssh any more. this was working before (about 2 or 3 weeks). must i set something special NOW? or is this a know bug? simon@becherer1:~> ssh -X becherer1 Last login: Fri Jun 22 07:53:33 2018 from 127.0.0.1 Have a lot of fun... simon@becherer1:~> su Passwort: becherer1:/home/simon # yast2 QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0 QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0 now a window opens: "Yast-Kontrollzentrum @ becherer1" but the window is empty, no respond. "the wrong ownership......" message, i think is normal this i have had before also (maybe only once), so i think this has nothing to do. same situation if i use ssh to another tumbleweed system. switching off firewalld will not help ssh -X for yast2 to a opensuse 11.4 system works fine. (also no ownership error) from 11.4 to tumbleweed also yast2 work fine. some error messages: QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0 QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0 libGL error: failed to load driver: swrast QXcbShmImage: xcb_shm_attach() failed with error: 10 (BadAccess), sequence: 474, resource id: 473, major code: 147 (Unknown), minor code: 1 working. ========================================== only tumbleweed to tumbleweed did not work. ========================================== starting other graphical tools like clamtk as root, or firefox or thunderbird (as user) will work fine. what is going on here? simoN - -- www.becherer.de -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAEBAgAGBQJbLJf7AAoJEOuDxDCJWQG+VGYP/Rfaf/ynvz7vNJDFC4DlZnio Einy78sr3xMCwri6zXPmomMfq5I+IAlGZqju+tjtkiKJ+rw49e7Sig1EXHk8Bs1N 8waVadR71ft9daCamc2qmOqQLQWUuABqs0VmMXMWbG7scrzkGpnuWmBJdfMFE6yB T/9TyOYOEo4J06n4bhuWHVAXNuwIkYm9kzJMpxMV5acaQ/RViVk2SBmfg8fUEabL Gx+HjMereGWw3xjg/T7Lq5WGxVYIbv8iYwWI3Z//grMPzxzJHvs8qoqFeCHBSIoC kjYgEMTDJIvqs6VWt9sZJbngEbeaOJNq1r5n0h8SOR1SEu8E+wD7lYed5cYKXqsJ yMkfq5EvN/LybOs053/ejlKOWzrR0YvRsMCljbmKNLC4WxuBU2HufRabQmsvUAUB zQFdjg90HP1E9g4rfAU3+/DQgkUiPDo2vb7HOugnWOxDuh127UGA4PM9+LjYQ4DL EFKvQNUbSf/eebPIXhxUm9f+oT6niS/UQxyphNu5yY+inprYGmHXnTokzngWSJhP MexQQ8XH0sOPeVXuDIxdu0QTaAAbcYLvX8cGNRD26SSMIbweAHbl7ANgZ6z1agxN EF4NDijJLYnFKYe7SMJnxFvRgWIqDGOxAgcoj3N/SiTgpau8O3MtIURQbkJjxZ5d 7qCu+9zHiqX17UtR+i1X =exXl -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 9 months

[opensuse] boot dependencies fail (wicked / network up too late?)

by Paul Neuwirth

Hello, on Leap 15.0 I have the problem, that many systemd-services fail on boot, or won't work correct, as network is not up and/or name resolution doesn't work. see below... systemd thinks the system was network up ( Reached target Host and Network Name Lookups. / Reached target Network.). What may be misconfigured? # cat /etc/sysconfig/network/ifcfg-br0 BOOTPROTO='dhcp4' BRIDGE='yes' BRIDGE_FORWARDDELAY='0' BRIDGE_PORTS='bond0' BRIDGE_STP='off' BROADCAST='' DHCLIENT_SET_DEFAULT_ROUTE='yes' ETHTOOL_OPTIONS='mode=balance-alb miimon=+00' IPADDR='' MTU='' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' # cat /etc/sysconfig/network/ifcfg-bond0 BONDING_MASTER='yes' BONDING_MODULE_OPTS='mode=active-backup miimon=100' BONDING_SLAVE0='eth0' BONDING_SLAVE1='eth1' BOOTPROTO='none' BROADCAST='' DHCLIENT_SET_DEFAULT_ROUTE='yes' ETHTOOL_OPTIONS='mode=balance-alb miimon=+00' IPADDR='' MTU='' NAME='' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' PREFIXLEN='' # cat /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='none' BROADCAST='' DHCLIENT_SET_DEFAULT_ROUTE='no' ETHTOOL_OPTIONS='' IPADDR='' MTU='' NAME='NetXtreme BCM5721 Gigabit Ethernet PCI Express' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' # cat /etc/sysconfig/network/ifcfg-eth1 BOOTPROTO='none' STARTMODE='auto' IPADDR='' NETMASK='' PREFIXLEN=''# cat /etc/sysconfig/network/ifcfg-eth1 BOOTPROTO='none' STARTMODE='auto' IPADDR='' NETMASK='' PREFIXLEN='' BROADCAST='' ETHTOOL_OPTIONS='' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' BROADCAST='' ETHTOOL_OPTIONS='' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' excerpt from journal: Jun 19 08:33:11 localhost kernel: tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:0e:b6:2b:74:e8 Jun 19 08:33:11 localhost kernel: tg3 0000:04:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) Jun 19 08:33:11 localhost kernel: tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] Jun 19 08:33:11 localhost kernel: tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] Jun 19 08:33:11 localhost kernel: tg3 0000:05:00.0 eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:0e:b6:2b:74:e9 Jun 19 08:33:11 localhost kernel: tg3 0000:05:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) Jun 19 08:33:11 localhost kernel: tg3 0000:05:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] Jun 19 08:33:11 localhost kernel: tg3 0000:05:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] Jun 19 08:33:16 localhost systemd[1]: Started Asterisk PBX. Jun 19 08:33:16 localhost systemd[1]: Starting wicked DHCPv4 supplicant service... Jun 19 08:33:16 localhost systemd[1]: Starting wicked DHCPv6 supplicant service... Jun 19 08:33:16 localhost systemd[1]: Started CUPS Scheduler. Jun 19 08:33:16 localhost systemd[1]: Starting wicked AutoIPv4 supplicant service... Jun 19 08:33:17 localhost asterisk[986]: No ethernet interface found for seeding global EID. You will have to set it manually. Jun 19 08:33:17 localhost avahi-daemon[994]: Network interface enumeration completed. Jun 19 08:33:18 localhost rsyslogd[1060]: [origin software="rsyslogd" swVersion="8.33.1" x-pid="1060" x-info="http://www.rsyslog.com"] start Jun 19 08:33:19 localhost systemd[1]: Reached target Host and Network Name Lookups. Jun 19 08:33:19 localhost systemd[1]: Started wicked DHCPv6 supplicant service. Jun 19 08:33:19 localhost systemd[1]: Started wicked AutoIPv4 supplicant service. Jun 19 08:33:19 localhost systemd[1]: Started wicked DHCPv4 supplicant service. Jun 19 08:33:19 localhost systemd[1]: Starting wicked network management service daemon... Jun 19 08:33:20 localhost systemd[1]: Started wicked network management service daem# cat /etc/sysconfig/network/ifcfg-eth1 BOOTPROTO='none' STARTMODE='auto' IPADDR='' NETMASK='' PREFIXLEN='' BROADCAST='' ETHTOOL_OPTIONS='' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' on. Jun 19 08:33:20 localhost systemd[1]: Starting wicked network nanny service... Jun 19 08:33:20 localhost systemd[1]: Started wicked network nanny service. Jun 19 08:33:20 localhost systemd[1]: Starting wicked managed network interfaces... Jun 19 08:33:20 localhoJun 19 08:33:59 theta avahi-daemon[994]: Service "linux-2" (/etc/avahi/services/ssh.service) successfully established. Jun 19 08:33:59 theta avahi-daemon[994]: Service "linux-2" (/etc/avahi/services/sftp-ssh.service) successfully established. st kernel: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Jun 19 08:33:20 localhost kernel: bond0 (uninitialized): Setting MII monitoring interval to 100 Jun 19 08:33:20 localhost systemd-udevd[1170]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Jun 19 08:33:20 localhost systemd-udevd[1170]: Could not generate persistent MAC address for bond0: No such file or directory Jun 19 08:33:21 localhost kernel: bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. Jun 19 08:33:21 localhost systemd-udevd[1178]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Jun 19 08:33:21 localhost systemd-udevd[1178]: Could not generate persistent MAC address for br0: No such file or directory Jun 19 08:33:21 localhost kernel: tg3 0000:04:00.0 eth0: Board does not support EEE! Jun 19 08:33:21 localhost kernel: bond0: Enslaving eth0 as a backup interface with a down link Jun 19 08:33:21 localhost kernel: tg3 0000:04:00.0 eth0: Board does not support EEE! Jun 19 08:33:21 localhost kernel: tg3 0000:04:00.0 eth0: Board does not support EEE! Jun 19 08:33:21 localhost kernel: tg3 0000:04:00.0 eth0: Board does not support EEE! Jun 19 08:33:21 localhost kernel: tg3 0000:04:00.0 eth0: Board does not support EEE! Jun 19 08:33:21 localhost kernel: tg3 0000:04:00.0 eth0: Board does not support EEE! Jun 19 08:33:21 localhost kernel: tg3 0000:05:00.0 eth1: Board does not support EEE! Jun 19 08:33:21 localhost kernel: bond0: Enslaving eth1 as a backup interface with a down link Jun 19 08:33:21 localhost kernel: tg3 0000:05:00.0 eth1: Board does not support EEE! Jun 19 08:33:21 localhost kernel: tg3 0000:05:00.0 eth1: Board does not support EEE! Jun 19 08:33:21 localhost kernel: tg3 0000:05:00.0 eth1: Board does not support EEE! Jun 19 08:33:21 localhost kernel: tg3 0000:05:00.0 eth1: Board does not support EEE! Jun 19 08:33:21 localhost kernel: tg3 0000:05:00.0 eth1: Board does not support EEE! Jun 19 08:33:21 localhost kernel: br0: port 1(bond0) entered blocking state Jun 19 08:33:21 localhost kernel: br0: port 1(bond0) entered disabled state Jun 19 08:33:21 localhost kernel: device bond0 entered promiscuous mode Jun 19 08:33:22 localhost systemd[1]: Starting Xenconsoled - handles logging from guest consoles and hypervisor... Jun 19 08:33:22 localhost xen-init-dom0[1268]: Done setting up Dom0 Jun 19 08:33:22 localhost systemd[1]: Starting qemu for xen dom0 disk backend... Jun 19 08:33:22 localhost systemd[1]: Started xen-init-dom0, initialise Dom0 configuration (xenstore nodes, JSON configuration stub). Jun 19 08:33:22 localhost systemd[1]: Started qemu for xen dom0 disk backend. Jun 19 08:33:24 localhost kernel: tg3 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex Jun 19 08:33:24 localhost kernel: tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX Jun 19 08:33:24 localhost kernel: tg3 0000:04:00.0 eth0: Board does not support EEE! Jun 19 08:33:24 localhost kernel: tg3 0000:05:00.0 eth1: Link is up at 1000 Mbps, full duplex Jun 19 08:33:24 localhost kernel: tg3 0000:05:00.0 eth1: Flow control is on for TX and on for RX Jun 19 08:33:24 localhost kernel: tg3 0000:05:00.0 eth1: Board does not support EEE! Jun 19 08:33:24 localhost kernel: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex Jun 19 08:33:24 localhost kernel: bond0: making interface eth0 the new active one Jun 19 08:33:24 localhost kernel: device eth0 entered promiscuous mode Jun 19 08:33:24 localhost kernel: bond0: first active interface up! Jun 19 08:33:24 localhost kernel: bond0: link status definitely up for interface eth1, 1000 Mbps full duplex Jun 19 08:33:24 localhost kernel: tg3 0000:04:00.0 eth0: Board does not support EEE! Jun 19 08:33:24 localhost kernel: tg3 0000:04:00.0 eth0: Board does not support EEE! Jun 19 08:33:24 localhost kernel: br0: port 1(bond0) entered blocking state Jun 19 08:33:24 localhost wickedd-dhcp4[989]: br0: Request to acquire DHCPv4 lease with UUID b1a3285b-3e22-0300-7304-000008000000 Jun 19 08:33:27 localhost nscd[1017]: 1017 monitored file `/etc/resolv.conf` was written to Jun 19 08:33:34 localhost wickedd-dhcp4[989]: unable to confirm lease Jun 19 08:33:39 localhost wickedd-dhcp4[989]: br0: defer timeout 15 reached (state INIT) Jun 19 08:33:50 localhost wicked[1145]: lo up Jun 19 08:33:50 localhost wicked[1145]: eth0 enslaved Jun 19 08:33:50 localhost wicked[1145]: eth1 enslaved Jun 19 08:33:50 localhost wicked[1145]: bond0 enslaved Jun 19 08:33:50 localhost wicked[1145]: br0 setup-in-progress Jun 19 08:33:50 localhost systemd[1]: Started wicked managed network interfaces. Jun 19 08:33:50 localhost systemd[1]: Reached target Network. Jun 19 08:33:50 localhost systemd[1]: Starting IPMI Driver... Jun 19 08:33:50 localhost systemd[1]: Starting Daemon to remotely execute Nagios plugins... Jun 19 08:33:50 localhost systemd[1]: Started Berkeley Open Infrastructure Network Computing Client. Jun 19 08:33:50 localhost systemd[1]: Starting Network UPS Tools - power device monitor and shutdown controller... Jun 19 08:33:50 localhost systemd[1]: Starting Fail2Ban Service... Jun 19 08:33:50 localhost systemd[1]: Starting NTP Server Daemon... Jun 19 08:33:50 localhost nrpe[1475]: Starting up daemon Jun 19 08:33:51 localhost systemd[1]: Starting OpenSSH Daemon... Jun 19 08:33:51 localhost nrpe[1475]: Server listening on 0.0.0.0 port 5666. Jun 19 08:33:51 localhost systemd[1]: Starting Simple Network Management Protocol (SNMP) Daemon.... Jun 19 08:33:51 localhost systemd[1]: Reached target Network is Online. Jun 19 08:33:51 localhost upsmon[1468]: UPS: myups(a)alpha.swabian.net (slave) (power value 1) Jun 19 08:33:51 localhost systemd[1]: Mounting /xxx... Jun 19 08:33:51 localhost systemd[1]: Mounting /var/lib/libvirt/images/boot... Jun 19 08:33:51 localhost nrpe[1475]: socket: Address family not supported by protocol Jun 19 08:33:51 localhost nrpe[1475]: Listening for connections on port 5666 Jun 19 08:33:51 localhost nrpe[1475]: Allowing connections from: 127.0.0.1,alpha.swabian.net Jun 19 08:33:51 localhost upsmon[1486]: Startup successful Jun 19 08:33:51 localhost upsmon[1490]: UPS [myups(a)alpha.swabian.net]: connect failed: No such host Jun 19 08:33:51 localhost upsmon[1490]: Communications with UPS myups(a)alpha.swabian.net lost Jun 19 08:33:51 localhost sshd-gen-keys-start[1481]: Checking for missing server keys in /etc/ssh Jun 19 08:33:51 localhost systemd[1]: Started Daemon to remotely execute Nagios plugins. Jun 19 08:33:51 localhost systemd[1]: nut-monitor.service: Supervising process 1490 which is not our child. We'll most likely not notice when it exits. Jun 19 08:33:51 localhost systemd[1]: Started Network UPS Tools - power device monitor and shutdown controller. Jun 19 08:33:51 localhost systemd[1]: Started Fail2Ban Service. Jun 19 08:33:51 localhost systemd[1]: var-lib-libvirt-images-boot.mount: Mount process exited, code=exited status=32 Jun 19 08:33:51 localhost systemd[1]: Failed to mount /var/lib/libvirt/images/boot. Jun 19 08:33:51 localhost systemd[1]: var-lib-libvirt-images-boot.mount: Unit entered failed state. Jun 19 08:33:51 localhost systemd[1]: storage.mount: Mount process exited, code=exited status=32 Jun 19 08:33:51 localhost systemd[1]: Failed to mount /xxx. Jun 19 08:33:51 localhost systemd[1]: Dependency failed for /xxx. Jun 19 08:33:51 localhost systemd[1]: Dependency failed for Remote File Systems. Jun 19 08:33:51 localhost systemd[1]: remote-fs.target: Job remote-fs.target/start failed with result 'dependency'. Jun 19 08:33:51 localhost systemd[1]: home-pane-Downloads.mount: Job xxx.mount/start failed with result 'dependency'. Jun 19 08:33:51 localhost systemd[1]: Dependency failed for /xxx. Jun 19 08:33:51 localhost systemd[1]: home-pane-.gnupg.mount: Job xxx.mount/start failed with result 'dependency'. Jun 19 08:33:51 localhost systemd[1]: Dependency failed for /xxx. Jun 19 08:33:51 localhost systemd[1]: home-pane-Documents.mount: Job xxx.mount/start failed with result 'dependency'. Jun 19 08:33:51 localhost systemd[1]: Dependency failed for /xxx Jun 19 08:33:51 localhost systemd[1]: home-pane-finanzen.mount: Job xxx.mount/start failed with result 'dependency'. Jun 19 08:33:51 localhost systemd[1]: xxx.mount: Unit entered failed state. Jun 19 08:33:51 localhost ntpd[1501]: ntpd 4.2.8p11(a)1.3728-o (1): Starting Jun 19 08:33:52 localhost start-ntpd[1471]: Starting network time protocol daemon (NTPD)Name or service not known Jun 19 08:33:52 localhost systemd[1]: Started NTP Server Daemon. Jun 19 08:33:52 localhost systemd[1]: Reached target System Time Synchronized.# cat /etc/sysconfig/network/ifcfg-eth1 BOOTPROTO='none' STARTMODE='auto' IPADDR='' NETMASK='' PREFIXLEN='' BROADCAST='' ETHTOOL_OPTIONS='' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' Jun 19 08:33:52 localhost systemd[1]: Started Discard unused blocks once a week. Jun 19 08:33:52 localhost systemd[1]: Started Daily rotation of log files. Jun 19 08:33:52 localhost systemd[1]: Reached target Timers. Jun 19 08:33:52 localhost systemd[1]: Starting Postfix Mail Transport Agent... Jun 19 08:33:52 localhost echo[1565]: Starting mail service (Postfix) Jun 19 08:33:52 localhost systemd[1]: Starting The Apache Webserver... Jun 19 08:33:52 localhost systemd[1]: Starting LSB: festival daemon providing full text-to-speech system... Jun 19 08:33:53 localhost snmpd[1483]: Turning on AgentX master support. Jun 19 08:33:53 localhost snmpd[1483]: Error opening specified endpoint "udp:172.18.0.2:161" Jun 19 08:33:53 localhost snmpd[1483]: Server Exiting with code 1 Jun 19 08:33:53 localhost systemd[1]: snmpd.service: Main process exited, code=exited, status=1/FAILURE Jun 19 08:33:53 localhost systemd[1]: Failed to start Simple Network Management Protocol (SNMP) Daemon.. Jun 19 08:33:53 localhost systemd[1]: snmpd.service: Unit entered failed state. Jun 19 08:33:53 localhost systemd[1]: snmpd.service: Failed with result 'exit-code'. Jun 19 08:33:53 localhost postfix[1592]: fatal: config variable inet_interfaces: host not found: localhost Jun 19 08:33:54 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jun 19 08:33:54 localhost systemd[1]: postfix.service: Control process exited, code=exited status=1 Jun 19 08:33:54 localhost boinc[1467]: 19-Jun-2018 08:33:54 getaddrinfo(localhost): Name or service not known19-Jun-2018 08:33:54 [---] Host name: localhost Jun 19 08:33:54 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team Jun 19 08:33:55 localhost cond_slp[1634]: /usr/sbin/postconf: fatal: config variable inet_interfaces: host not found: localhost Jun 19 08:33:55 localhost systemd[1]: apache2.service: Main process exited, code=exited, status=1/FAILURE Jun 19 08:33:55 localhost systemd[1]: Failed to start The Apache Webserver. Jun 19 08:33:55 localhost systemd[1]: apache2.service: Unit entered failed state. Jun 19 08:33:55 localhost systemd[1]: apache2.service: Failed with result 'exit-code'. Jun 19 08:33:56 localhost upsmon[1490]: UPS [myups(a)alpha.swabian.net]: connect failed: No such host Jun 19 08:33:56 localhost upsmon[1490]: UPS myups(a)alpha.swabian.net is unavailable Jun 19 08:33:56 localhost systemd[1]: Failed to start Postfix Mail Transport Agent.# cat /etc/sysconfig/network/ifcfg-eth1 BOOTPROTO='none' STARTMODE='auto' IPADDR='' NETMASK='' PREFIXLEN='' BROADCAST='' ETHTOOL_OPTIONS='' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' Jun 19 08:33:56 localhost systemd[1]: postfix.service: Unit entered failed state. Jun 19 08:33:56 localhost systemd[1]: postfix.service: Failed with result 'exit-code'. Jun 19 08:33:56 localhost postfix/sendmail[1673]: fatal: config variable inet_interfaces: host not found: localhost Jun 19 08:33:56 localhost fail2ban-server[1500]: fail2ban.utils [1500]: Level 39 7ff5b823b030 -- exec: printf %b "Subject: [Fail2Ban] asterisk: started on localhost Date: `LC_ALL=C date +"%a, %d %h %Y %T %z"` From: Fail2Ban <fail2ban(a)alpha.swabian.net> To: root(a)alpha.swabian.net\n Hi,\n The jail asterisk has been started successfully.\n Regards,\n Fail2Ban" | /usr/sbin/sendmail -f fail2ban(a)alpha.swabian.net root(a)alpha.swabian.net Jun 19 08:33:56 localhost fail2ban-server[1500]: fail2ban.utils [1500]: ERROR 7ff5b823b030 -- stderr: 'sendmail: fatal: config variable inet_interfaces: host not found: localh> Jun 19 08:33:56 localhost fail2ban-server[1500]: fail2ban.utils [1500]: ERROR 7ff5b823b030 -- stderr: '/bin/sh: line 0: printf: write error: Broken pipe' Jun 19 08:33:56 localhost fail2ban-server[1500]: fail2ban.utils [1500]: ERROR 7ff5b823b030 -- returned 75 Jun 19 08:33:56 localhost fail2ban-server[1500]: fail2ban.actions [1500]: ERROR Failed to start jail 'asterisk' action 'sendmail-whois-lines': Error starting action Jail('aste> Jun 19 08:33:56 localhost wickedd-dhcp4[989]: br0: Committed DHCPv4 lease with address 172.18.0.2 (lease time 14400 sec, renew in 7200 sec, rebind in 12600 sec) Jun 19 08:33:56 localhost systemd[1]: Startup finished in 3.239s (kernel) + 6.769s (initrd) + 50.075s (userspace) = 1min 85ms. Jun 19 08:33:56 localhost postfix/sendmail[1691]: fatal: config variable inet_interfaces: host not found: localhost Jun 19 08:33:56 localhost fail2ban-server[1500]: fail2ban.ipdns [1500]: WARNING Unable to find a corresponding IP address for localhost: [Errno -2] Name or service not known Jun 19 08:33:56 localhost avahi-daemon[994]: Joining mDNS multicast group on interface br0.IPv4 with address 172.18.0.2. Jun 19 08:33:56 localhost avahi-daemon[994]: New relevant interface br0.IPv4 for mDNS. Jun 19 08:33:56 localhost avahi-daemon[994]: Registering new address record for 172.18.0.2 on br0.IPv4. Jun 19 08:33:56 localhost avahi-daemon[994]: Host name conflict, retrying with linux-2 Jun 19 08:33:56 localhost avahi-daemon[994]: Registering new address record for 172.18.0.2 on br0.IPv4. Jun 19 08:33:58 localhost avahi-daemon[994]: Server startup complete. Host name is linux-2.local. Local service cookie is 2127127572. Jun 19 08:33:59 localhost wickedd[1139]: ni_process_reap: process 1933 has not exited yet; now doing a blocking waitpid() Jun 19 08:33:59 theta systemd[1]: Reloading System Logging Service. Jun 19 08:33:59 theta systemd[1]: Reloaded System Logging Service. Jun 19 08:33:59 theta rsyslogd[1060]: message repeated 2 times: [omfwd: could not get addrinfo for hostname 'alpha.swabian.net':'514': Temporary failure in name resolution [v> Jun 19 08:33:59 theta rsyslogd[1060]: [origin software="rsyslogd" swVersion="8.33.1" x-pid="1060" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Jun 19 08:33:59 theta avahi-daemon[994]: Service "linux-2" (/etc/avahi/services/ssh.service) successfully established. Jun 19 08:33:59 theta avahi-daemon[994]: Service "linux-2" (/etc/avahi/services/sftp-ssh.service) successfully# cat /etc/sysconfig/network/ifcfg-eth1 BOOTPROTO='none' STARTMODE='auto' IPADDR='' NETMASK='' PREFIXLEN='' BROADCAST='' ETHTOOL_OPTIONS='' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' established. thank you, Regards Paul -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 9 months

[opensuse] virt-manager spice-usb-redirection

by Simon Becherer

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, opensuse tumbleweed x11 kde: if i assign a fixed usb device to a guest all is ok. but if i redirect an usb device with the spice usb redirection it will fail: spice-client-glib-usb-helper: Error PoliciKit error: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action org.spice-space.lowlevelusbaccess is not registered starting virt-manager as root, and it will redirect the usb device without error. i searched the net but found only a old solutions from 2014 but no success: trying: https://forums.opensuse.org/showthread.php/501434-Can-t-redirect-USB-to-QEM… chmod u+s /usr/bin/spice-client-glib-usb-acl-helper did not work. changing the file: /usr/share/polkit-1/cations/org.spice-space.lowlevelusbaccess.policy <allow_any>auth_admin</allow_any> <allow_inactive>no</allow_inactive> <allow_active>auth_admin</allow_active> After I have <allow_any>yes</allow_any> <allow_inactive>no</allow_inactive> <allow_active>yes</allow_active> did only not ask me when using as normal user to insert the root password, but did not redirect the usb-device. switching off firewalld also did not work. my user is a member of: systemd-journal libvirt lp trusted i tried to add all (except root) groups at my system to my user, but did not get success. could it be that some group (something like usb) is missing at my system? has anybody this running, and what groups has his user? or is there another trick (something with appamor?)? simoN - -- www.becherer.de -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAEBAgAGBQJbLKXLAAoJEOuDxDCJWQG+PccP/15q7zicUQqwaPMVaT4417og 7WFTR5xduaOqS7bWu6IkqgzU/wCfUNdskbkXd9EXkYixCByOuqUI1mqjDfbT++R5 hinSYNzKattfS4giYMEtjy3RGlQvDQR/lmSCn/iqmFf2g2BE4WwAhMirV8nn7onL rRd8hAgKp9uj7+dp5wrrMk5cj3Nns8S3LhKUZAiPHveV9mEXU0zIWNoVdxrnZX6F rtN2J/G0WlyCB1jYkLtC/H4l/B/W2vHzWP+3seArqT3aqww3tgxmcc3vyjiZ6uXz UeWKXoWJ0f8zYxrQ6gbdrX5tiJ90tqnaN+vbzSTq2+Y4sm95DPy4ndm9Hy0x4Zay mEluAjm0fJuGh/Jcg/YB+aoYkPrchHQpuMlpRqwl4sv/Bo1ZVOPJpI+AXOQN4zDp 04V5gDlq7t3BbQWLNLFbo0PGg8mcjV0axmDls2VLcur1o/mYQ6xtSVHjDNDWTc4+ viS0DENHReRPnzRoEsNeuAh9p+f5a/muItBvpj3spD7/JvQ0Rl4eUBHPfrQAkBgd 62bsgzB2qAn5ortqI+suj36QrKvoRorBWdtiieMIz9b0ywjgsadZ9GW5rGi+si7V 1D+3SLP53qUxztbAG7FmcHkLHi6eItr4I2GnpZ9h/qyGAM0LbueYn/2t+JvItyqm 64PEmD+8i19oC2NWNRmo =0AC9 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 9 months

[opensuse] Virtualbox Linux Guest bug with 4.17 - heads up

by David C. Rankin

All, I you use Linux guests in virtualbox (especially if you access them via rdesktop after starting the host --headless), there are two bugs you should be aware of before updating the guest to the 4.17 kernel: https://bugs.archlinux.org/task/59091 and https://www.virtualbox.org/ticket/17827 Both are regarding the same bug, one with Arch and the other with Oracle. You essentially lose the left-mouse button input (rather important if you are running a desktop within the guest) The Host kernel makes no difference, it is the guest update that will cause the problems. -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 years, 9 months

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

openSUSE Users June 2018