January 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] network setup in leap 42.1
by Istvan Gabor 16 Jun '16

16 Jun '16

Hello: In openSUSE 13.2 the traditional network setup (ifup in yast) was removed and wicd (??) was introduced which I didn't like when I tried. Along with ifup kinternet/qinternet and related packages, eg smpppd (SuSE Meta PPP Daemon, the back-end for kinternet) have been removed too. I am curious how network manager independent network setup occurs in leap 42.1? Does it have kinternet on something similar? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 14

[opensuse] Does 13.2+ work with shorewall properly yet? Read about wicked/systemd woes
by cagsm 06 Jun '16

06 Jun '16

Good day, I am trying to find out of shorewall is supposed to work with 13.2 properly, as I read about systemd stuff being in the midst of creation and wicked and sort of that things that make it problematic to run something different from susefirewall2. Thanks for helping. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 20

[opensuse] I can not filter out some systemd messages in syslog
by Carlos E. R. 17 May '16

17 May '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have this in "/etc/rsyslog.conf": if ($programname == 'named' or $syslogtag == '[named]:') \ then -/var/log/named & stop ... if ($msg contains 'Started Session' and $msg contains 'of user') \ then -/var/log/systemdpurged & stop # # the rest in one file # *.*;mail.none;news.none -/var/log/messages I get the expected entries in "/var/log/systemdpurged": <3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Started Session 93 of user cer. <3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Started Session 94 of user news. But I'm also getting them in "/var/log/messages": <3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Starting Session 93 of user cer. <3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Starting Session 94 of user news. And they should not be there. So the "stop" line for those systemd entries is not acting. However, it works for other sections, like the "named" section shown above, and others I do not show for clarity. Are systemd entries special? - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlMSADcACgkQtTMYHG2NR9WCgwCdEgnb+Apy47tcjI31Dv5brA9X +TMAoIt87JaGgMoP5Zf11OZM0XevIjif =uI81 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Writing coments on photos problem - yes, again! O:-)
by Carlos E. R. 12 Feb '16

12 Feb '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Sigh. I'm scanning old photographic negatives with a compact scanner (a reflecta X7), and writing comments on the photos with Gwenview. But I have a problem: other programs do not see them. I don't see them with exif tools, for instance. I don't see them with shotwell. Conversely, if I write the comments with shotwell (which is configured to write metadata to the photos, not to a database), I don't see them in gwenview (but they do with "exif", tag "User Comment") I hesitate to continue writing comments till I verify that they are in fact written to the photo files, and that other programs read them. I don't see any configuration option in Gwenview regarding this. (why Gwenview? Because rotating photos is fast here, and it doesn't do any library import. For the moment I only want to put each roll in its own directory. Writing comments is also easy, although they are easyer to see in Shotwell) I'm not doing photo edit for the moment. Just archiving. (Old slides have lost a lot of the colour) - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlas0FwACgkQtTMYHG2NR9UEoQCdHIpxWHvJwjqel85l16buM0KN uhAAn2QdWpgq54RUYOsRu94mrfHVSXkw =Ijn9 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

13 134

[opensuse] disabling wakeup when monitor sends hibernate message
by don fisher 09 Feb '16

09 Feb '16

I have an ASUS_VN289H HDMI monitor connected to my Alienware HDMI output port. When the external monitor is not connected, the system blanks the screen the way I have requested. When the external monitor is connected, the monitor blanks, then the monitor offers a lost signal message, and the system unblanks. I would RTFM if I know which one to look at:-) What I would like to know is how to disable the wakeup call that I think that the monitor must be sending when it looses signal. Thanks, Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] xbindkeys ??
by Emilio Recio 05 Feb '16

05 Feb '16

I am recent to OpenSUSE. I noticed that there's no "xbindkeys" app? Am I missing something or am I looking in the wrong place for the RPM? Thanks! The information contained in this transmission contains privileged and confidential information. It is intended only for the use of the person named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. CAUTION: Intended recipients should NOT use email communication for emergent or urgent health care matters.

8 18

[opensuse] configuring grub2
by jdd 02 Feb '16

02 Feb '16

Hello, 1) I try to configure grub2 simply to remove the unuseful options on the kernel line, specially splash=silent, because I need to see the logs (leap do not start most of the times). nothing seems to works... according to https://doc.opensuse.org/documentation/html/openSUSE_122/opensuse-reference… * yast2 have a corresponding line, but making this line empty do not stay (the option come again) * setting /etc/sysconfig/bootloader option to ="" do not give any change * /etc/default/grub is nearly empty and have nothing relevant * Scripts under /etc/grub.d/ scripts have no "splash" in them and are pretty complex, so I don't know how to do there * grub2-mkconfig -o /boot/grub2/grub.cfg rebuild the grub.cfg file... with the options I try to remove 2) osprober add the menus for my main /dev/sda disk, but not for my other /dev/sdb disk (system is on /dev/sdc) os-prober /dev/sdb /dev/sda1:Windows 7 (loader):Windows:chain /dev/sda4:Windows Recovery Environment (loader):Windows1:chain /dev/sda6:openSUSE 13.2 (x86_64):SUSE:linux I now it's a script, but much too hard for me :-( thanks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 10

[opensuse] systemd-udev-root-symlink.service not starting any on 13.2
by Thomas Bühlmann 01 Feb '16

01 Feb '16

Hello List! As stated ind the title: The systemd-udev-root-symlink.service doesnt start anymore and spams my logs with: Cannot add dependency job for unit systemd-udev-root-symlink.service, ignoring: Unit systemd-udev-root-symlink.service failed to load: Invalid argument. See system logs and 'systemctl status systemd-udev-root-symlink.service' for details. I only see: systemd[1]: [/usr/lib/systemd/system/systemd-udev-root-symlink.service:10] Executable path is not absolute, ignoring: udevlibexec@/rootsymlink-generator in my /usr/lib/systemd/system/systemd-udev-root-symlink.service i see ExecStart=@udevlibexec@/rootsymlink-generator (The two at-signs don't make sense to me..) shouldn't it bee ExecStart=/usr/lib/udev/rootsymlink-generator ? Thanks for helping! --Tom -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Docker and Gui
by Chuck Payne 01 Feb '16

01 Feb '16

Guys, I been doing a lot of work with docker. I was wondering if JUJU or some type of GUI to manage docker is around for openSUSE? -- Terror PUP a.k.a Chuck "PUP" Payne ----------------------------------------- Discover it! Enjoy it! Share it! openSUSE Linux. ----------------------------------------- openSUSE -- Terrorpup openSUSE Ambassador/openSUSE Member skype,twiiter,identica,friendfeed -- terrorpup freenode(irc) --terrorpup/lupinstein Register Linux Userid: 155363 Have you tried SUSE Studio? Need to create a Live CD, an app you want to package and distribute , or create your own linux distro. Give SUSE Studio a try. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] openSUSE Recommended Update: Resolve a dependency issue with libmatroska
by Luciano Mannucci 01 Feb '16

01 Feb '16

Hello, is there an eaquivalent of the - openSUSE 13.1 patch 2016-51=1 for openSUSE 13.2? I can't upgrade libmatroska via regular you. Maybe there is a workaround or I have missed something... Cheers to all, Luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.lesassaie.IT/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2