February 2021 - openSUSE Users - openSUSE Mailing Lists

ACER E5-575
by Carl Spitzer {L Juno} 22 Feb '21

22 Feb '21

now three installs later new errors. First install Leap 15.2 worked for a year then suddenly ethernet stopped working. File systems ext4. Some creative workarounds fixed it temporarily then failed. So second install fixed that used btrfs for root and xfs for home then suddenly / became read only so with Knoppix I got my files and settings off. through all this one strange persistant error indicator: platform mgs10101:00 failed to claim resource 1: mcm oxfed 40000 Even when working correctly this last error persisted. now i will try again with new partitions Is all this a general error of Leap or is it ACER specific? ____________________________________________________________ Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_tag… 'He Was the DB Cooper of Nebraska' http://thirdpartyoffers.juno.com/TGL3131/6031ce5ee41734e5e20c8st03duc1 Abbott Calls Biden's Move 'Partial Approval' http://thirdpartyoffers.juno.com/TGL3131/6031ce5f142cc4e5e20c8st03duc2 Metal Panel Found in 1991 Could Hold Earhart Clues http://thirdpartyoffers.juno.com/TGL3131/6031ce5f3783e4e5e20c8st03duc3

2 3

wicked: support route type table
by Samuel Bernardo 21 Feb '21

21 Feb '21

Hello, I'm trying for some years to change from network scripts into wicked, but it seems wicked lack the support for routing tables. From available documentation I don't see that feature available[1][2]. The support for the following seems not to be available in wicked: > 192.168.0/24 - - - - src 192.168.0.12 table mylocalnet where ifrule have the following > 4: from 192.168.0.12 lookup mylocalnet I require different routing tables for each network device. Is there any way to achieve the same behavior with wicked? Regards, Samuel [1] https://github.com/openSUSE/wicked/blob/master/man/ifroute.5.in [2] https://github.com/openSUSE/wicked/blob/master/man/ifrule.5.in

2 1

hplip
by Michael Spartana 20 Feb '21

20 Feb '21

Hi, I believe there is a problem with the latest tumbleweed version of hplip (hplip-3.20.11-1.4.x86_64 ) I am unable to install the plugin and am getting the error: Error importing HPLIP modules. Is HPLIP installed? I checked on google and this type of error has been seen before. Probably no one else has seen it on tumbleweed as most tumbleweed users probably don't keep reinstalling the OS. I'm not on factory so could someone look into this.....Thanks, mike

7 16

Freezing Skype after TW 20210212 & 20210215
by Vojtěch Zeisek 19 Feb '21

19 Feb '21

Hi, since I yesterday upgraded 2 TW installs with KDE to latest TW snapshots, both 20210212 as well as 20210215, and since then Skype (latest version from its own repo) seems to be running in background well, i.e. it notifies me about new message and so on, but the window doesn't render at all, it contains basically background, so it's not usable at all. I wonder if this could be related to possible sandboxing issue mentioned by Dominique at Tuesday, but I have 64bit systems, and I have libqt5-qtwebengine 5.15.2-6.1 from tw-update. Any idea what could be wrong? -- Vojtěch Zeisek https://trapa.cz/ Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux https://www.opensuse.org/

2 2

Plasma Mouse wheel scrolling speed?
by Alex Bihlmaier 19 Feb '21

19 Feb '21

Where can i set this? "System settings -> Input -> Mouse" is not helpful. Anyone? thanks!

3 3

GIMP and plugins in oS or TW
by oszko＠chem.u-szeged.hu 19 Feb '21

19 Feb '21

Hi all, I try to use GIMP as a photo manipulator software on TW. Mainly to a bit repair old photos. I know there is a so-called resynthetizer python plugin set for GIMP. I dowloaded them, copied into the plugins directory of GIMP, made them executabel, and reloaded GIMP. And nothing. They should be present inthe Filters/Enhance list, but they are not there. Could anybody of you made them to work? I would especially need the heal selection plugin to remove patches, flecks, writing on old pictures. Unfortunately, it is also difficult to make toolboxes visible in oS. In Ubuntu and Mint GIMP comes up as expected - but the plugins mentioned above are not seen either. Best regards, Albert ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 2

openSUSE-Leap-15.3-DVD-x86_64-Build76.1-Media.iso
by ken 17 Feb '21

17 Feb '21

Why the designation as "Build76.1"?

3 3

Re: Leap 15.2 KDE file associations
by Knurpht-openSUSE 15 Feb '21

15 Feb '21

Op maandag 15 februari 2021 16:58:31 CET schreef Roger Oberholtzer: > On Mon, Feb 15, 2021 at 3:56 PM Knurpht-openSUSE <knurpht(a)opensuse.org> wrote: > > I already asked to keep this on the ML. It's no use to turn to a private > > email conversation. If I would do so, I would not have time for work :-D > It is on the ML. I guess that my mail program is sending to that as > well as to you directly. Why it goes to both is mysterious. I also > prefer to keep it on the ML so others can follow. I think I see the diffence the client sees: I use users(a)lists.o.o, you still use opensuse(a)o.o . And we most likely filter our MLs .... -- Gertjan Lettink a.k.a. Knurpht openSUSE Board openSUSE Forums Team

1 0

Leap 15.2 KDE file associations
by Roger Oberholtzer 15 Feb '21

15 Feb '21

On a recent Leap 15.2 install, I seem not to be able to get KDE to remember file associations. More specifically, which application to run for the file. If I select a file in Konqueror, and then select an application in the dialog Konqueror provides, and click the box that says to remember this, when I click again on that same file, it once again asks which application to use. It never remembers the association. It does run the application after I select it. But never again unless I select the application again. When I say that the association should be remembered, I get the status window saying that something is being updated. There is no error. In the X log, I see this when the association is selected and being remembered: kbuildsycoca4 running... So if there is an error, it is not presented anywhere I see. Has anyone else seen this? -- Roger Oberholtzer

2 1

scaling old applications
by Simon Becherer 13 Feb '21

13 Feb '21

Hi, tumbleweed kde, amd-ryzen1700, amd graphic, 3 screens 3840x2160 (over all a fast machine) i run a old x-windows application on a virtual qemu-suse10.1 (its a proprietary software, and this is the last suse where its running on - and the last linux release of this software) (to be clear somewhere on 10.1 it stopped working, because of some updates (during live-cycle of 10.1), so i freeze the system at last working version)) this software is not scalable with the window manager. i could scale the software internally up to 2048x2048 pixels. but with my new screens 3840x2160 its to small to work with. i start this software normally over ssh two or three times in parallel. now my question: is there a possibility to scale a old software wit a fast reaction time? i could easily with virtmanager (over spice) work with the virtual machine and scale it. - but then i have only one time the software running at the desktop. but i need often more in parallel. i tried: https://github.com/kaueraal/run_scaled but i have a huge reaction lack of mouse movement and some parts of the screen are not updated correct. - not usable. at the moment i change screen resolution at one of my monitor to still use more than one instance of the software in parallel. but this is not comfortable, all other things i move to this monitor is also scaled.... if there is not a solution of scaling, maybe how to start 2 or 3 times inside the virtual machine the software and use spice to have access to all of them in parallel? (be careful, i do not think spice was developed in times of suse10.1) (mouse movement at spice with virtmanager is faster than vnc-virtmanger) simoN -- www.becherer.de

1 0