August 2007 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Really need help from networking guru
by Art Fore 04 Sep '07

04 Sep '07

I really need some help on a networking problem that I have tried to solve for several months now. At least point me to where I can find the answer as I have searched the web and not found anything. (Could be I am not asking right question, but I am not a programmer) After booting up, I open a root console and execute the following commands. ifplugd -bfi eth1 route add default gw 192.168.11.1 route del default gw 10.18.32.1 This gets me internet access for linux on the wireless card. (eth0 is used by Windows under parallels, normal network card) I put these commands in /etc/init.d/boot.local. When I boot, It does not work. If I try to enter them again in a root console, the ifplugd -bfi eth1 seems to work, that is no error. The route add default gw 192.168.11.1 comes back network unreachable. So, I remove the commands from boot.local, reboot, then everything works again after entering all of the commands in a root console. What am I doing wrong? Art -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 8

[opensuse]
by Michael S. Dunsavage 04 Sep '07

04 Sep '07

How many cpu's can linux support? -- Michael S. Dunsavage -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

9 11

[opensuse] Up to date bonding documentation ?
by Frank Bonnet 03 Sep '07

03 Sep '07

Hello I've found some docs about "bonding" but it is written that it is an obsolete page ! What is the "good" doc page URL for opensuse 10.2 ? Thanks -- Cordialement Frank Bonnet -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 6

[opensuse] Updating through Yast
by Fernando Costa 03 Sep '07

03 Sep '07

Hi... I'm updating some programs (compiz, gwenview, etc.. ) with yast... but the process is freezed... is about half hour that is freezed 100% percent completed) and don't know what would happen if I shut down or kill the process... please give some help (not using Zen Synchronization). openSUSE 10.2 Thanks, -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Emerald theme, how to apply to gnome panel
by Hans Linux 03 Sep '07

03 Sep '07

anyone can tell me how to apply the selected emerald theme to gnome panel? the theme only applies on window. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Catalyst Control Center Linux Edition
by Francisco José Cadaval Arrola 03 Sep '07

03 Sep '07

Hi all! I have installed latest version of ATI drivers on 10.2. Installation was ok and CCC (Catalyst Control Center) appeared on applications list. I tried to run it but a reboot was needed after drivers installation before be able to use it. The problem is that after reboot CCC doesn't appear in applications menu. 3D acceleration is ok, I'm sure about drivers are running but I wish to use CCC. Do you know how to launch CCC? Thank you, and excuse me for my bad English. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] Conflicts on KDE upgrade
by Ciro Iriarte 03 Sep '07

03 Sep '07

Hi, trying to update a 10.1@x84_64 system with the latest KDE3 packages from build service i get a lot of conflicts between kdelibs3 and kdelibs3-32bit. Shouldn't this libraries go to a different directory? Example: error: file /opt/kde3/lib/libkspell.so.4.2.0 from install of kdelibs3-3.5.7-69.1 conflicts with file from package kdelibs3-32bit-3.5.1-49.18.3 error: file /opt/kde3/lib/libkspell2.so.1.0.0 from install of kdelibs3-3.5.7-69.1 conflicts with file from package kdelibs3-32bit-3.5.1-49.18.3 error: file /opt/kde3/lib/libktexteditor.so.0.0.0 from install of kdelibs3-3.5.7-69.1 conflicts with file from package kdelibs3-32bit-3.5.1-49.18.3 error: file /opt/kde3/lib/libkunittest.so.1.0.0 from install of kdelibs3-3.5.7-69.1 conflicts with file from package kdelibs3-32bit-3.5.1-49.18.3 error: file /opt/kde3/lib/libkutils.so.1.2.0 from install of kdelibs3-3.5.7-69.1 conflicts with file from package kdelibs3-32bit-3.5.1-49.18.3 error: file /opt/kde3/lib/libkwalletbackend.so.1.0.0 from install of kdelibs3-3.5.7-69.1 conflicts with file from package kdelibs3-32bit-3.5.1-49.18.3 error: file /opt/kde3/lib/libkwalletclient.so.1.0.1 from install of kdelibs3-3.5.7-69.1 conflicts with file from package kdelibs3-32bit-3.5.1-49.18.3 error: file /opt/kde3/lib/libvcard.so.0.0.0 from install of kdelibs3-3.5.7-69.1 conflicts with file from package kdelibs3-32bit-3.5.1-49.18.3 Regards, Ciro -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 2

[opensuse] silly girls' cli copy problem
by primm 02 Sep '07

02 Sep '07

I've 800 or so files and folders in a folder called nonmembers. I mkdir another folder in the folder nonmembers called members. I want to copy all the 800 files in nonmembers to members. I'm in the nonmembers folder at the command line. What do I type? Sounds easy doesn't it. I tried cp -a * members but that of course includes members. I suppose I want to say 'copy everything in the nonmembers folder that was there before I made the members folder to the members folder'. If I had a gui I would simply drag and drop. Thanks. Lynn. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

16 53

[opensuse] Printer on LTSP client
by Andre Truter 02 Sep '07

02 Sep '07

Hi All, I have a ltsp server and a thin client that works. Now I need to connect a USB printer to the client and make that work. I have googled and followed the documentation, and different variations of it, but I cannot get it to work. This is what I have in the lts.conf file: [00:20:ED:79:00:BC] PRINTER_0_TYPE = U PRINTER_0_DEVICE = /dev/usb/lp0 I have also tried /dev/usblp0 When I telnet to port 9100 of the client, it connects and then disconnects immediately the first time. If I telnet again, I get a Connection Refused. If I leave it alone for about 10 minutes, I can telnet again to get connected and disconnected again. I have set up a printer in cups as an IP printer to port 9100 on the client, but it does not work. The ltsp server is running SUSE 10.2 and we use ltsp 4.2 Any ideas how to get this working? -- Andre Truter | Software Consultant | Registered Linux user #185282 Jabber: andre.truter(a)gmail.com | http://www.trusoft.co.za ~ A dinosaur is a salamander designed to Mil Spec ~ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] compressing files
by Art Fore 01 Sep '07

01 Sep '07

OK, needed to compress some files into a zip achrive. Highlight the files in Konquerer as usual, select compress, zip (has to be windows compatible), says compressing, then never finishes. Have done this before. What is the problem with Suse 10.2 all of a suddent? Art -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

13 39