April 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"
by ellanios82 11 Aug '19

11 Aug '19

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] IPv6 Rogue Router Security Issue
by Lew Wolfgang 30 Dec '17

30 Dec '17

Hi Folks, There seems to be a flurry of IPv6 talk going on, maybe this is time for me to bring up the rogue router problem again? I asked about this a couple of times over the years but could never find anyone to comment on it. First, here's the RFC that describes the problem: https://tools.ietf.org/html/rfc6104 Rogue routers have affected me personally at a customer's site. This is a large, professionally managed, dual-stacked network with a number of v4 class B addresses and thousands of hosts. Subnets seem to be /20 CIDR in size, so there are plenty of "neighbors" on any given subnet. I've encountered the situation where misconfigured Windows systems will advertise themselves as an IPv6 router. They then happily accept traffic and drop it all silently on the floor. This problem doesn't seem to bother other Windows boxes too much, but it absolutely kills SSH connections. SSH preferentially tries IPv6 port 22, which when sent to a dumb Windows box results in very long hangups and connection failures. My workaround for my cohort of Linux desktops and servers was to disable IPv6 for both ssh and sshd. This will work for as long as the host network supports dual stacks, but eventually? Then there's the issue of intentional MITM attacks using this vector. If a bad actor has physical access to a subnet, or has compromised a host on that subnet, your goose is cooked. This link mentions some mitigations, but they're quite technical and may require hardware support. https://community.infoblox.com/t5/IPv6-Center-of-Excellence/Holding-IPv6-Ne… So, what is the threat to a home IPv6 user who has WiFi and an Internet of Things with minimal/non-existent security? I personally feel safer behind a nice natted IPv4 firewall with ACL rules between my copper and WiFi subnets. I just feel that I have more control of the situation with a simpler network. Has SUSE addressed this issue? Tell me I don't have to worry about it! Regards, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 67

[opensuse] Again, trying to find a suitable video editor.
by Carlos E. R. 02 Dec '17

02 Dec '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I simply can't find a suitable video editor that works. My goal is to extract the interesting parts of a TV recording. Ie, mark the start of the movie, the end, the commercials inside, and dump all that into a single file, perhaps recoding. One limitation is that movies here have two sound tracks, one in Spanish, and the other one in the original language, typically English. I want to keep both, obviously. I don't need any transition or effect, just a simple editor that allows me to remove unwanted sections. I have tried: pitivi - crashes on start LiVES - works for an hour at 100% CPU and can't load the file. dvbcut - says my mpeg file is not a video (and it certainly is!) tragtor - can convert, but not edit. openshot - almost. My video has two sound tracks, and this tool ignores the second track. cinelerra-cv - I can't make head or tails of it. I tell it to load a video file, it does, but then I don't see how to do anything. It doesn't even display the video. I may have to read the manual, but I dislike having to read a manual for a GUI. Still... kdenlive - Well... crashes too often. I can mark the cuts, but it does not display what I'm cutting. And only one sound track. HandBrake - no edit. Avidemux - one sound track only. Kino - abandonware. Lightworks ?? Shotcut - Segmentation fault on start. cer@Telcontar:~/Videos/Fusion/trabajo> shotcut QSqlDatabase: QSQLITE driver not loaded QSqlDatabase: available drivers: QMYSQL QMYSQL3 QSqlQuery::exec: database not open QSqlQuery::exec: database not open Database::Database(QObject*) Failed to get version. QSqlQuery::exec: database not open bool Database::upgradeVersion1() Failed to create thumbnails table. Database version is 0 Segmentation fault cer@Telcontar:~/Videos/Fusion/trabajo> Flowblade ?? I don't understand the tool. May need some reading. At least it runs. I would like something that would produce a command line to ffmpeg in a GUI. Then I could modify further the options. This would be ideal. tragtor works this way, but has no editor. - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlbbJ80ACgkQtTMYHG2NR9UmagCeK8UbAAz5/lAjBvscdhzBuxtb WUQAn2jmzoy7810hldN4WwVWQktgVp2g =muqW -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

28 199

[opensuse] html5 dependencies
by Richmond 19 Jul '17

19 Jul '17

This website: http://www.bbc.co.uk/html5 contains an html5 video. You have to be opted in to html5, it says if you are on the right hand side. This video wasn't working for me in seamonkey or firefox, until I enabled the Packman repository and installed Mplayer. So I think there are some dependencies which are not satisfied by installing firefox. But I think I read that firefox downloads some things on the fly for html5, so maybe it should check for libraries too? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 45

[opensuse] openSUSE-13.1 update repo
by Philip Amadeo Saeli 05 Jun '17

05 Jun '17

I have an openSUSE-13.1 system that I have neglected update with the latest updates, and the assoc update repo now seems to have disappeared. Anyone know where I can find the updates to apply to the system? I'd like to archive the system in the fully updated condition when I am ready to switch to a newer system as well as to have the latest updates instaled during the brief time I will be using it until that time. Thanks, --Phil -- Philip Amadeo Saeli psaeli(a)zorodyne.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 13

[opensuse] Digikam, etc. cannot upload from iPhone 6S
by Dennis Gallien 21 May '17

21 May '17

Not sure if this is a KDE or Solid (or other) issue . . . sorry for message length but trying to include all relevant data I know of . . . Digikam has worked great importing/deleting photos from iPhone 6S for a year, working on 13.2. I recently upgraded 13.2 => 42.1 => 42.2 about a month ago. I can't honestly say whether this problem arose with the Leap upgrade, or with an update since. When Digikam opens it displays the following error message: The specified camera ("/org/kde/solid/udev/sys/devices/ pci0000:00/0000:00:12.2/usb1/1-1/1-1:4.2/net/eth2") is not supported. ~>lsusb shows the camera as: Bus 001 Device 002: ID 05ac:12a8 Apple, Inc. Switching to a different port , , , ~>lsusb Bus 004 Device 003: ID 05ac:12a8 Apple, Inc. Digikam then throws this error when started: The specified camera ("/org/kde/solid/udev/sys/devices/ pci0000:00/0000:00:13.2/usb4/4-2/4-2:4.2/net/eth1") is not supported. Yet still Digikam (and other photo apps) autodetects the phone. It is shown under the Import menu, and when Import for the phone is selected the second Digikam windows opens. At bottom it shows the correct camera media capacity and amount used, while under the Device menu it shows the phone is recognized on the correct usb port. It shows that upload and delete are supported functions. But it cannot see the photo files. (It is seen as an "iPhone5 (PTP mode)"; gphoto2 --list-cameras does not show iPhone6 but that was not a problem before; the udev hwdb shows the same phone ID for both iPhone5 and iPhone6. Tested this with my wife's iPhone 5 and the errors were the same.) gphoto2: --list-ports sees the correct port --list-folders sees the "store_feedface" folder but no files. --abilities shows iPhone 5 with USB support, file preview and upload = yes When I try kio camera:/ in Dolphin I get: camera:/Apple%2520iPhone%25205%2520(PTP%2520mode)@usb:001,002/ An "Apple iPhone 5 (PTP Model)" folder appears with the sub-folder "store_feedface" but no DCIM folder nor any photos. When I try gtkam it can see the iPhone "store-feedface" but not DCIM, no files. Experimenting with this app I once got this error, too: An error occurred in the io-library ('Could not claim the USB device'): Could not claim interface 0 (Device or resource busy). Make sure no other program (gvfs-gphoto2-volume-monitor) or kernel module (such as sdc2xx, stv680, spca50x) is using the device and you have read/write access to the device. Similarly, when I tried Shotwell it threw: Unable to fetch previews from the camera: Could not claim the USB device (-53) But strangely, darktable uploads (and deletes) the iPhone files even though it uses libgphoto2.so.6 just as all the other apps do. Still works fine with my Canon A570. Digikam Version 5.4.0 Using: KDE Frameworks 5.26.0 Qt 5.6.1 (built against 5.6.1) My suspicion is that the problem is connect to the error "could not claim USB device", as I've seen that several times. Just a wild-ass guess. I checked Bugzilla KDE and Solid, found multiple instances of PTP cameras being recognized but files not retrievable over the last ~5 years. But nothing recent. I did find a 2011 bug report on Ubuntu Launchpad which was reported again in Dec claiming a regression in Digikam, but it wasn't verified. (And that was Digikam4, not 5). Any suggestions where to look further? Again, apologies for length. TIA, Dennis P.S. KDE folks might want to note that the Device Notifier entry always displays the camera twice rather than just once when it's attached, and when the "Open with File Manager" option is chosen, the app errors on not finding the KDE4 version of Dolphin: KDEInit could not launch 'dolphin4': Could not open library 'libkdeinit5_dolphin4'. Cannot load library libkdeinit5_dolphin4: (libkdeinit5_dolphin4: cannot open shared object file: No such file or directory) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 18

[opensuse] Virtualbox extensions
by James Knott 18 May '17

18 May '17

When installing Oracle Virtualbox, using files downloaded from Oracle, it is necessary to install the virtual box package, extensions and guest additions. In the openSUSE version, there are virtualbox, desktop icons, host kernel and virtualbox-qt. Is there anything that includes the extensions? I downloaded the guest additions from Oracle. The reason I'm asking is that when I use the openSUSE packages, I can't use USB 2, only 1.1. I could use USB 2 previously, when using the packages from Oracle. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] 100% cpu load on firefox, unresponsive
by Carlos E. R. 04 May '17

04 May '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Since some weeks I see my firefox peg at 100% load (on return from hibernation) and become unresponsive: PID USER PR NI VIRT RES SHR SWAP S %CPU %MEM TIME+ COMMAND 25530 cer 20 0 5691504 1,568g 136272 267020 R 100,7 20,11 136:25.20 firefox But the "about:performance" tab doesn't display a culprit. Perhaps the "about:performance" tab itself. Told to reload, doesn't do it. I can't open new pages, it does not obey. I have to exit it completely and restart it. But this time it cleared, apparently, while I wrote this post. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlj/KfAACgkQtTMYHG2NR9VxewCfTHX84qgU1hi6p9IuuIMwIh00 FBUAnRADjzSVWgyhc5xyHYcwuVlW9fC4 =Az0x -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Bug reporting for LibreOffice distro from Opensuse repository
by jr87654＠gmx.com 03 May '17

03 May '17

I'm to trying to find out how to post a bug report for LibreOffice distro from Opensuse repository. It's a simple bug affecting page headers in reports created by Report Builder in Base. I posted bug report 107215 <https://bugs.documentfoundation.org/show_bug.cgi?id=107215> on LibreOffice Bugzilla where other tests appear to confirm that this is a distro specific issue and does not affect their download packages, so they are no longer interested and recommended I report it to Opensuse. So I posted bug report 1036830 <https://bugzilla.opensuse.org/show_bug.cgi?id=1036830> on OpenSuse Bugzilla but as I am running OpenSuSe 13.2 (out of support), they won't fix on my report, but say that "this [package] is not provided by SUSE, packages are provided by community/openSUSE". I do not believe that this bug is OS related (and the other reports appear to confirm this). As the bug is in the currently available LogoopenSUSE Build Service > Projects > LibreOffice:5.2 > libreoffice <https://build.opensuse.org/package/show/LibreOffice:5.2/libreoffice> (v5.2.6.2) for OpenSuSe 13.2 x64, I would like to report it so it can be fixed. How can I do this? Thanks. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 18

[opensuse] Opensuse 13.2 KDE 4 Question about a problem with PAM or permissions?
by stakanov 03 May '17

03 May '17

I have a user that has following setup: System settings are secure. User A all works as expected. You plugin a USB card / key and it asks for the root password. User B was for a long time full normal. Worked as A. Suddenly it refuses to open USB keys. It asks for the password but the user cannot see the input window for the rootpassword. What could be the reason. Yes I know I have to change the machine, but is is under the usual responsibility of that user, which is in Italy and I am in Brussels now. So I would like to have some clue where to search when I am going to do this over the phone. For me it is a kind of "focus stealing" but I am far from certain. The error message is: user did not input the authorization (or similar, in short, it is the message you get when you try to mount without authorization. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2