- openSUSE Users

[opensuse] change gnome drag direction for docs, menus, etc.
by ken 24 May '18

24 May '18

On a laptop with a touch pad: It's recently happened somehow that, when I'm In Firefox and want to scroll a long document down (e.g., to read more toward the bottom of the doc), I have to drag on the touchpad *upwards*. This is also true of all apps and widgets, e.g., to scroll down through a long menu, I have to drag *up*. Of course this is totally counter-intuitive. I've looked around quite a bit in the various configuration apps and settings, but haven't found a way to change this back to normal. Does anyone know how/where this is done? tnx much. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 17

[opensuse] openSUSE bug in Thunderbird?
by DennisG 24 May '18

24 May '18

Thunderbird by default blocks remote content in messages. The user has the option to whitelist exceptions to that rule, which should be retained by T'bird after it is closed. However, my T'bird is flushing the list every time it is closed. Checking prefs.js, the permissions are correct and the file is being saved after Preference changes. I did check prefs.js after manually entering/saving an exception in Preferences, but found nothing. The file is being saved upon doing a save in Preferences or upon closing the app. Googling the problem I found this on the Mozilla support site: "Thunderbird no longer saves remote content exceptions after program close." https://support.mozilla.org/en-US/questions/1204666 According to the OP who uses Tumbleweed, this is only happening for users of SUSE versions, including the SUSE Mozilla repo. Another poster indicated that s/he had corrected the problem by installing directly from the Mozilla site. I am running 52.8-63.1 which was just updated from 52.8-1.1 where I discovered the problem; the update did not correct it. Anyone else seeing this problem? Suggestions? Thanks! --dg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Thunderbird forgetting remote content preferences
by gumb 24 May '18

24 May '18

This might be an upstream bug but perhaps others here can confirm if they've seen the same. Not sure when it started but it might have coincided with my recent update to TB 52.8.0ESR in the official Leap 42.3 updates a few days ago. I don't allow remote content in messages by default. But there's a bunch of things I get regularly where at some point in the past I have clicked the Preferences above the message and opted to explicitly allow remote content from whatever domain or address. The last few days, this is continually forgotten, I have to do it for every message even if the content is from the same origin. gumb -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

Re: [opensuse] Thunderbird forgetting remote content preferences
by DennisG 23 May '18

23 May '18

On 05/23/2018 05:58 PM, gumb wrote: > This might be an upstream bug but perhaps others here can confirm if they've seen the same. Not sure when it started but it might have coincided with my recent update to TB 52.8.0ESR in the official Leap 42.3 updates a few days ago. > > I don't allow remote content in messages by default. But there's a bunch of things I get regularly where at some point in the past I have clicked the Preferences above the message and opted to explicitly allow remote content from whatever domain or address. The last few days, this is continually forgotten, I have to do it for every message even if the content is from the same origin. > > gumb > As you can see, I posted the same question when you did. The problem exists in both the recent 52.8063.1 update and the updated 52.8-1.1. Can't say how many versions back this goes, I just migrated my mail to T'bird a couple weeks ago. --dg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] History repeats itself: disk cache
by Roger Oberholtzer 23 May '18

23 May '18

A couple of years ago I had a problem where a program was streaming data to a file. Unfortunately, the OS cached the contents in RAM and only dealt with it occasionally. The problem was that this would cause periodic delays of a long time while the cache was dealt with. Write calls would have to wait until this task was completed. See the following for the original discussion: https://lists.opensuse.org/opensuse/2013-06/msg00069.html The solution that worked was to have something like the following running: while [ 1 ]; do sync; echo 1 > /proc/sys/vm/drop_caches; sleep 60; done & This really did solve the problem. We have now updated the OS for this system to Leap 42.3. It does not seem that this is having the same effect. One difference I see is that the sync command seems to take a very long time. Like over a minute each time. The fwrite() calls change from taking 1 msec to write a buffer (which is actually cached in ram by the kernel fs driver until later), to 20 secs or a minute. While we do buffer data, these long write delays are a problem. I have looked to see if there is anything different about /proc/sys/vm/drop_caches since we had originally used it. I think it was openSUSE 13.1 where we last saw that it seemed to be working as expected. Anyone have a clue about this? Maybe there is a better way to do this now? We are using ext4. IIRC, we tried other file systems at the time, but this was a general feature of all file systems. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 21

[opensuse] What are the "opensuse-current" and "opensuse-stable" repositories?
by Fábio Mallaco Moreira 23 May '18

23 May '18

So, I was getting ready for Leap 15 release and updating my repository files and I noticed these other directories on the server. What are those? It seems to me the packages in them are tha same as in the 42.3 repo, are they just logic links to the most recent leap version repos? OSS > download.opensuse.org/distribution/leap/42.3/repo/oss/ > download.opensuse.org/distribution/openSUSE-current/repo/oss/ > download.opensuse.org/distribution/openSUSE-stable/repo/oss/ non-OSS > download.opensuse.org/distribution/leap/42.3/repo/non-oss/ > download.opensuse.org/distribution/openSUSE-current/repo/non-oss/ > download.opensuse.org/distribution/openSUSE-stable/repo/non-oss/ Update OSS > download.opensuse.org/update/leap/15.0/oss/ > download.opensuse.org/update/openSUSE-current/ > download.opensuse.org/update/openSUSE-stable/ Update non-OSS > download.opensuse.org/update/leap/15.0/non-oss/ > download.opensuse.org/update/openSUSE-non-oss-current/ > No stable version for this? I found "current" versions of the source and debug repos also. Could these possiply be used to keep a system runing the latest leap repease without changing the repositories? Thx in advance, Fábio Mallaco Moreira -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] libreoffice help
by don fisher 23 May '18

23 May '18

I am unable to get the F1 key to generate anything except a "not installed on your computer" message. I cannot find either under Yast or Google where to get the appropriate package to add the help files. Thanks Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 84

[opensuse] Q: btrfs setting in openSUSE LEAP 15.0
by Hideki Yamane 23 May '18

23 May '18

Hi, I have a question about btrfs setting in openSUSE LEAP 15.0. Default btrfs subvolume setting is below. > sudo btrfs subvolume list / ID 257 gen 193 top level 5 path @ ID 258 gen 227 top level 257 path @/var ID 259 gen 193 top level 257 path @/usr/local ID 260 gen 227 top level 257 path @/tmp ID 261 gen 193 top level 257 path @/srv ID 262 gen 213 top level 257 path @/root ID 263 gen 193 top level 257 path @/opt ID 264 gen 193 top level 257 path @/boot/grub2/x86_64-efi ID 265 gen 193 top level 257 path @/boot/grub2/i386-pc ID 266 gen 108 top level 257 path @/.snapshots Top subvolume is @ and several nested subvolumes. And /etc/fstab is here. UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 / btrfs defaults 0 0 UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 /boot/grub2/x86_64-efi btrfs subvol=/@/boot/grub2/x86_64-efi 0 0 UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 /boot/grub2/i386-pc btrfs subvol=/@/boot/grub2/i386-pc 0 0 UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 /.snapshots btrfs subvol=/(a)/.snapshots 0 0 UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 /var btrfs subvol=/@/var 0 0 UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 /usr/local btrfs subvol=/@/usr/local 0 0 UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 /tmp btrfs subvol=/@/tmp 0 0 UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 /srv btrfs subvol=/@/srv 0 0 UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 /root btrfs subvol=/@/root 0 0 UUID=9e8ed1d6-38bd-4ba0-91b1-d1f6d151aa85 /opt btrfs subvol=/@/opt 0 0 UUID=342cc6c9-4729-4dc4-8ecd-ba51693136fb /home xfs defaults 0 0 UUID=f1001e72-21dd-4a58-8885-ea838704359a swap swap defaults 0 0 It mounts / without subvol option, so I expected I can see "/@" at root (/). However, > ls / bin dev home lib64 mnt proc run selinux sys usr boot etc lib media opt root sbin srv tmp var My question is - Why there is no /@? Any tricks with it? - Why it doesn't mount @ as / ? If so, we don't need to write multiple lines for /etc/fstab, IMHO. - There are /boot/grub2/* subvolumes, why it doesn't set "chattr+C", instead of subvolume? -- Regards, Hideki Yamane henrich @ iijmio-mail.jp -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] zypper dup leap 42.3 to 15.0, does it work?
by cagsm 23 May '18

23 May '18

Is this still a tested and proven scenario? Also what I read contradicting procedures about zypper dup from one distribution version to the next was, if one were to zypper update zypper itself first and only issue zypper dup as the last step or run the zypper from the still current distribution version. Back several opensuse versions ago, there were also conflicting compression algorithms and stuff used in rpm if i recall correctly where you even had to update rpm to the next distribution version first as well and so on. Any experiences yet? Also can we already zypper dup as the online repos except for the isos are already available and populated? Tia. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] where did /etc/sysconfig/syslog come from?
by L A Walsh 23 May '18

23 May '18

Tried to see what package owned it -- as it was changed a few months back to use rsyslog instead of my configured ng-syslog, which I sorta thought was odd -- thought they usually put configfiles aside and labeled them with a special suffix, but didn't see any of those around. Just a bit on the strange side... Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 15

[opensuse] how does a plain user get access to a core dump?
by Per Jessen 22 May '18

22 May '18

It's been a while since I have reason to, but I need a plain (non-root) user to access his own core dumps, and I've forgotten how that is done? Is there perhaps a way of reverting to having core dumps written to the working dir? -- Per Jessen, Zürich (15.9°C) http://www.dns24.ch/ - free dynamic DNS, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 26

[opensuse] Virtualbox load
by James Knott 22 May '18

22 May '18

I've noticed that lately a Windows 10 virtual machine has become a real hog. Top shows virtualbox taking well over 100% sometimes over 200% of CPU. Memory usage appears OK, but starting up W10 causes a real performance hit on Linux and even within W10. Has anyone else noticed this? I believe there was a recent update to Virtualbox on openSUSE and there was an update to W10 a couple of weeks ago, so I'm not sure where the problem may be. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Wrong desktop for main window and pop-up windows (plasma)
by Bengt Gördén 22 May '18

22 May '18

Hi, I've got a problem that I can't seem to get rid of. I'm not sure if it's Opensuse (TW, several incarnation), plasma or Thunderbird. But here goes. I start Thunderbird like this from the KDE menu and I'm at desktop 2. Thunderbird is placed on desktop 1. kstart5 --desktop 1 thunderbird %u When I go from one mailbox/folder in Thunderbird to another and I get a question like "do you want to jump to <mailbox>?" in a pop-up window, Thunderbird goes back to the desktop I started it from (desktop 2). I tried the old kstart but it was the same problem. When I move it manually with right click on taskbar everything stays at correct desktop. Anyone seen this and knows of a remedy? I'll file a bug report if it's nothing obvious I missed. I start two other programs like this google-chrome and quasselclient but they doesn't seem to behave like this so I suspect that it's only Thunderbird and how it starts it's pop-up-windows. Cheers, -- /bengan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Boot message and cpu speed
by don fisher 22 May '18

22 May '18

I am running leap 14.3. I have tried to join the kernel list, but while I did receive a welcome message, nothing else followed. So I am posing the question here. On boot, with printout enabled, I receive numerous messages about temperature above threshold. But this occurs from an off state where the system is cold! From my dmesg log I have the following. The first elements are what I receive on my boot message, but right after it says all are normal. These are consecutive lines, so I do not understand that something happened between the first set of messages and the second. Any comments? Don CPU5: Core temperature above threshold, cpu clock throttled (total events = 1) CPU4: Core temperature above threshold, cpu clock throttled (total events = 1) CPU2: Package temperature above threshold, cpu clock throttled (total events = 2) CPU3: Package temperature above threshold, cpu clock throttled (total events = 2) CPU6: Package temperature above threshold, cpu clock throttled (total events = 2) CPU1: Package temperature above threshold, cpu clock throttled (total events = 2) CPU0: Package temperature above threshold, cpu clock throttled (total events = 2) CPU7: Package temperature above threshold, cpu clock throttled (total events = 2) CPU4: Package temperature above threshold, cpu clock throttled (total events = 2) CPU5: Package temperature above threshold, cpu clock throttled (total events = 2) CPU4: Core temperature/speed normal CPU5: Core temperature/speed normal CPU6: Package temperature/speed normal CPU1: Package temperature/speed normal CPU0: Package temperature/speed normal CPU7: Package temperature/speed normal CPU4: Package temperature/speed normal CPU5: Package temperature/speed normal CPU3: Package temperature/speed normal CPU2: Package temperature/speed normal microcode: CPU0 microcode updated early to revision 0x24, date = 2018-01-21 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] VLC shows black screen on mp4 and mkv videos
by Josep 21 May '18

21 May '18

Since the last update, VLC shows a black screen, when a mp4 or mkv are playing. A week ago everything was ok. The following is the output of zypper lr --- # | Alias | Name | Enabled | GPG Check | Refresh ---+---------------------------------+-----------------------------------------+---------+-----------+-------- 1 | download.opensuse.org-non-oss | Repositori principal (No OSS) | Yes | (r ) Yes | Yes 2 | download.opensuse.org-non-oss_1 | Repositori d'actualització (No OSS) | Yes | (r ) Yes | Yes 3 | download.opensuse.org-oss | Repositori principal (OSS) | Yes | (r ) Yes | Yes 4 | download.opensuse.org-oss_1 | Repositori d'actualització principal | Yes | (r ) Yes | Yes 5 | openSUSE-Leap-42.3-0 | openSUSE-Leap-42.3-0 | No | ---- | ---- 6 | opensuse-guide.org-repo | Libdvdcss Repository | Yes | (r ) Yes | Yes 7 | packman.inode.at-suse | Packman | Yes | (r ) Yes | Yes 8 | repo-debug | openSUSE-Leap-42.3-Debug | No | ---- | ---- 9 | repo-debug-non-oss | openSUSE-Leap-42.3-Debug-Non-Oss | No | ---- | ---- 10 | repo-debug-update | openSUSE-Leap-42.3-Update-Debug | No | ---- | ---- 11 | repo-debug-update-non-oss | openSUSE-Leap-42.3-Update-Debug-Non-Oss | No | ---- | ---- 12 | repo-source | openSUSE-Leap-42.3-Source | No | ---- | ---- 13 | repo-source-non-oss | openSUSE-Leap-42.3-Source-Non-Oss | No | ---- | ---- --- And these are the results of zypper se vlc --- S | Name | Summary | Type ---+-------------------------------+--------------------------------------------------------------+------------ i+ | VLC Media player | Read, capture, broadcast your multimedia streams | application | libvlc-gtk0 | Freetuxtv library vlc-gtk | package | libvlc-gtk0-debuginfo | Debug information for package libvlc-gtk0 | package | libvlc123 | Shared library libvlc | package | libvlc123-debuginfo | Debug information for package libvlc123 | package i+ | libvlc5 | Shared code for the VLC media player program | package | libvlc5-debuginfo | Debug information for package libvlc5 | package | libvlccore123 | Shared library libvlc | package | libvlccore123-debuginfo | Debug information for package libvlccore123 | package i+ | libvlccore8 | Shared code for the VLC media player program | package | libvlccore8-debuginfo | Debug information for package libvlccore8 | package | nulloy-vlc | VLC plugin for nulloy | package | phonon-backend-vlc | Phonon VLC Backend | package | phonon4qt5-backend-vlc | Phonon VLC Backend | package i+ | vlc | Graphical media player | package | vlc | Graphical media player | srcpackage | vlc-beta | Video Lan Client multimedia player (preview of the upcomin-> | package | vlc-beta | Video Lan Client multimedia player (preview of the upcomin-> | srcpackage | vlc-beta-debuginfo | Debug information for package vlc-beta | package | vlc-beta-debugsource | Debug sources for package vlc-beta | package | vlc-beta-devel | Video Lan Client Development system | package | vlc-beta-noX | VLC: VideoLAN Client - without X dependencies | package | vlc-beta-noX-debuginfo | Debug information for package vlc-beta-noX | package | vlc-beta-noX-lang | Languages for package vlc-beta | package | vlc-beta-qt | VLC: VideoLAN Client - Qt interface | package | vlc-beta-qt-debuginfo | Debug information for package vlc-beta-qt | package i+ | vlc-codec-gstreamer | GStreamer integration for the VLC media player | package | vlc-codec-gstreamer-debuginfo | Debug information for package vlc-codec-gstreamer | package i | vlc-codecs | Additional codecs for the VLC media player | package | vlc-codecs-debuginfo | Debug information for package vlc-codecs | package | vlc-debuginfo | Debug information for package vlc | package | vlc-debugsource | Debug sources for package vlc | package | vlc-devel | Development files for the VLC media player system | package i+ | vlc-lang | Translations for package vlc | package i+ | vlc-noX | VLC without X dependencies | package | vlc-noX-debuginfo | Debug information for package vlc-noX | package i+ | vlc-qt | Qt interface for the VLC media player | package | vlc-qt-debuginfo | Debug information for package vlc-qt | packag --- VLC zypper info vlc --- Information for package vlc: ---------------------------- Repository : Packman Name : vlc Version : 2.2.6-8.6 Arch : x86_64 Vendor : http://packman.links2linux.de Installed Size : 401.7 KiB Installed : Yes Status : up-to-date Source package : vlc-2.2.6-8.6.src Summary : Graphical media player Description : VLC media player is a multimedia player for many audio and video files and formats (such as MPEG, DivX, mp3, ogg, ...) as well as DVDs, VCDs, and various streaming protocols. It can also be used as a server to stream in unicast or multicast in IPv4 or IPv6 on a high-bandwidth network. Note that the actual support is provided through ffmpeg and gstreamer libraries, which may not have all codecs enabled that were just named. --- Opensuse 42.3 Qt: 4.8.6 KDE Development Platform: 4.14.33 KDE Daemon: 4.14.33 Thank you in advance Josep M Solé -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] where are plasma5 shortcuts
by jdd＠dodin.org 20 May '18

20 May '18

Hello :-) on my kde plasma 5 (42.3), I can drag an executable of any application from Dolphin and get an icon that I can click to open the app. look at this screen copy: https://www.cjoint.com/doc/18_05/HEupzy0EQwh_Screenshot-20180520-172415.png but afterward, I can't figure where is the linked application. a right click only allow to add a keyboard shortcut. As you can see, the plasma desktop is *not* the usual desktop. The usual one, ~/Desktop, is the clear rectangle with "download" in it, what I look for are the icons under (vuescan, jddlibreoffice...) where are stored these "icons"? how can I guess where is the linked app? thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] resolving ~ on the command line ?
by Per Jessen 20 May '18

20 May '18

When I run: myexecutable --config=~/job00001.conf from the bash command line, surely am I right to expect ~/job00001.conf to be resolved to "/home/per/job00001.conf" ? -- Per Jessen, Zürich (15.4°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] wifi problems
by Daniel Bauer 19 May '18

19 May '18

I am here trying to use the wifi of my landlord. It is extremely slow, so slow that I cannot download emails with thunderbird due to time-out. The landlord says that ohers using the same wifi don't have problems. If use use that wifi on my phone, internet is fast and everything works, so I guess it is a problem on my computer. On the other hand, when I use my mobile phone as a 4G-hotspot and connect the laptop to this, internet works. Not very good, but it works. So it is not that my laptop in general doesn't like the internet, the problem is specific to the wifi of the house here. So my computer has something against the landlords wifi. What can it be? How can I find out? Things I noted (don't know if normal): - when connceted to that wifi, all mozilla programs need very long to open (thunderbird: 60 seconds, fireox 45 seconds). I am talking about the time from the click on the icon until the program window appears. When I connect over my mobile phone, those programs open normal. Do they really care about the connection? I think they should open without problems even if there is no connection at all, for local use...??? - sometimes the connection over the phone (using it as a mobile hotspot) also breaks down to very slow. Do I have a general internet problem that shows especially n the wifi here? I have no idea where to start to search for the error. Please help. Thanks! -- Daniel Bauer photographer Basel Barcelona https://www.patreon.com/danielbauer http://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 62

[opensuse] medical imaging software
by Dave Howorth 19 May '18

19 May '18

I want to look at some MRI images from a CD the hospital sent, which expects to see a Windows box. I've decrypted the disk using J7Z and am now looking for something to view the images with. Apparently they're in DICOM format but YaST just shows me what seems to be a toolkit and a python binding. There seem to be various possible in various arcane repositories but I'm wondering if anybody else knows more about this? There's a bunch of Q&A on ubuntu sites and the general web but nothing for openSUSE specifically that I have found. TIA, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 14

[opensuse] Help with ssh_config
by Christopher Myers 19 May '18

19 May '18

This is kind of driving me nuts, so I was hoping that someone might have some insights. I've got a cron'd script that's being called on a box, that runs a command like this: /usr/bin/sftp -v -b /home/jobsub/xgsftp_0518181327.parm -F /opt/ssh/ssh_config ftppub(a)ftp.xyz.com >> /home/jobsub/sftp_log_0518181327.log 2>&1 The contents of the .parm file are: lcd /home/jobsub cd / put file.txt bye The relevant contents of my ssh_config file are: Host ftp.xyz.com PubkeyAuthentication yes PasswordAuthentication no UserKnownHostsFile=/dev/null StrictHostKeyChecking=no IdentityFile /opt/ssh/sftp_xyz_key If I try to run that command manually, it works, and the file is transferred successfully: OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013 debug1: Reading configuration data /opt/ssh/ssh_config debug1: Applying options for ftp.xyz.com debug1: Connecting to ftp.xyz.com [1.2.3.4] port 22. debug1: Connection established. debug1: identity file /opt/ssh/sftp_xyz_key type 1 debug1: identity file /opt/ssh/sftp_xyz_key-cert type -1 debug1: Remote protocol version 2.0, remote software version CerberusFTPServer_9.0 debug1: no match: CerberusFTPServer_9.0 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-sha1 none debug1: kex: client->server aes128-ctr hmac-sha1 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<2048<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY Warning: Permanently added 'ftp.xyz.com,1.2.3.4' (RSA) to the list of known hosts. debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Offering public key: /opt/ssh/sftp_xyz_key debug1: Server accepts key: pkalg ssh-rsa blen 533 debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). debug1: channel 0: new [client-session] debug1: Entering interactive session. debug1: Sending subsystem: sftp sftp> lcd /home/jobsub sftp> cd / sftp> put file.txt Uploading file.txt to /file.txt sftp> bye debug1: channel 0: free: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK Transferred: sent 3496, received 2944 bytes, in 0.5 seconds Bytes per second: sent 7193.1, received 6057.3 debug1: Exit status -1 However, if I try to do it through the cron job, it fails: OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013 debug1: Reading configuration data /opt/ssh/ssh_config debug1: Connecting to ftp.xyz.com [1.2.3.4] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/id_rsa type 1 debug1: identity file /home/user/.ssh/id_rsa-cert type -1 debug1: identity file /home/user/.ssh/id_dsa type -1 debug1: identity file /home/user/.ssh/id_dsa-cert type -1 debug1: identity file /home/user/.ssh/id_ecdsa type -1 debug1: identity file /home/user/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version CerberusFTPServer_9.0 debug1: no match: CerberusFTPServer_9.0 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-sha1 none debug1: kex: client->server aes128-ctr hmac-sha1 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<2048<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY Host key verification failed. Couldn't read packet: Connection reset by peer For some reason, it's reading the ssh_config file, but doesn't link things up when run through a cron job? I've tried also setting the ssh_config match up with wildcards and by IP address too, but the results are the same. Any thoughts as to what's going on?? Oh, and -- there are other host configurations in the same ssh_config file, called in the same way, that work perfectly fine. It's just this one host entry that for some reason isn't matching up. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

Re: [opensuse] wifi problems - still strange
by Carlos E. R. 18 May '18

18 May '18

On 2018-05-18 20:30, James Knott wrote: > On 05/18/2018 02:27 PM, Carlos E. R. wrote: >> What you said. IPv6 enabled on the machine or network, yet no IPv6 to >> the outside. And a "host" query would return both IPv6/4 addresses, and >> the software would try the "6". It happened with zypper some years ago. >> >> Telcontar:~ # host download.opensuse.org >> download.opensuse.org has address 195.135.221.134 >> download.opensuse.org has IPv6 address 2620:113:80c0:8::13 > > Do you have an IPv6 address, other than link local? If yes, how are you > getting it? Telcontar:~ # ifconfig eth0 Link encap:Ethernet HWaddr 00:21:85:16:2D:0B inet addr:192.168.1.14 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe16:2d0b/64 Scope:Link inet6 addr: fc00::14/64 Scope:Global -- Cheers / Saludos, Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar)

2 6

[opensuse] leap 15.0, latest iso build 258.1, missing packages? no ddclient? no squid whatsoever?
by cagsm 18 May '18

18 May '18

Hi there, just briefly installed 258.1 build of leap 15.0 that is the latest now that we have a release (but then again what about that ship-stopper bug with resolvconf dns resolution at upgrade 42.3 to 15.0 scenario) and during install i wanted to select additional packages, and ddclient nor squid as search strings showed up any results at all. does this really mean leap 15 is lacking these packages and mis-unfortunately maybe lot of other stuff just as well when compared to previous leaps and opensuse editions? too bad. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 8

[opensuse] NVIDIA Driver Updates
by Matthias Bach 18 May '18

18 May '18

Hi, For the last few months, every time I installed an NVIDIA driver update my display manager won't come up afterwards (meaning after having rebootet the system). Having had this issue for a few times no I have however come up with a reliable workaround, running `systemctl restart display-manager`. Afterwards X will start reliable after reboots. But, only if I did the explicit restart one. Just doing another reboot won't fix it. Is anybody else observing this? Weirdly I actually have to restart the display manger as it claims to be running despite the journal telling that X died during startup. I have attached the journal for the display-manager unit showing the initial start and the successful start when I requested the restart. Kind Regards, Matthias -- Dr. Matthias Bach www.marix.org „Der einzige Weg, die Grenzen des Möglichen zu finden, ist ein klein wenig über diese hinaus in das Unmögliche vorzustoßen.“ - Arthur C. Clarke -- Logs begin at Fr 2018-05-18 21:10:54 CEST, end at Fr 2018-05-18 21:25:28 CEST. -- Mai 18 21:11:35 eddie systemd[1]: Starting X Display Manager... Mai 18 21:11:35 eddie display-manager[2442]: /etc/vconsole.conf available Mai 18 21:11:35 eddie display-manager[2442]: KEYMAP: de-latin1-nodeadkeys Mai 18 21:11:35 eddie display-manager[2442]: Command: localectl set-keymap de-latin1-nodeadkeys Mai 18 21:11:35 eddie display-manager[2442]: I: Using systemd /usr/share/systemd/kbd-model-map mapping Mai 18 21:11:35 eddie display-manager[2442]: Starting service kdm..done Mai 18 21:11:35 eddie systemd[1]: display-manager.service: PID file /var/run/displaymanager.pid not readable (yet?) after start: No such file or directory Mai 18 21:11:35 eddie kdm_config[2688]: Multiple occurrences of section [General] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:11:35 eddie kdm_config[2688]: Multiple occurrences of section [Xdmcp] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:11:35 eddie kdm_config[2688]: Multiple occurrences of section [X-*-Core] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:11:35 eddie kdm_config[2688]: Multiple occurrences of section [X-*-Greeter] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:11:35 eddie kdm_config[2688]: Multiple occurrences of section [X-:*-Core] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:11:35 eddie kdm_config[2688]: Multiple occurrences of section [X-:0-Core] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:11:35 eddie systemd[1]: Started X Display Manager. Mai 18 21:11:35 eddie kdm[2687]: plymouth is running Mai 18 21:11:35 eddie kdm[2687]: plymouth is active on VT 7, reusing for :0 Mai 18 21:11:35 eddie kdm[2687]: plymouth should quit after server startup Mai 18 21:11:36 eddie kdm[2687]: X server died during startup Mai 18 21:11:36 eddie kdm[2687]: X server for display :0 cannot be started, session disabled Mai 18 21:11:36 eddie kdm[2687]: Quitting Plymouth without transition Mai 18 21:11:36 eddie kdm[2687]: plymouth is NOT running Mai 18 21:12:15 eddie systemd[1]: Started X Display Manager. Mai 18 21:12:26 eddie systemd[1]: Stopping X Display Manager... Mai 18 21:12:27 eddie display-manager[3149]: Shutting down service kdm..done Mai 18 21:12:27 eddie systemd[1]: Stopped X Display Manager. Mai 18 21:12:27 eddie systemd[1]: Starting X Display Manager... Mai 18 21:12:27 eddie display-manager[3162]: /etc/vconsole.conf available Mai 18 21:12:27 eddie display-manager[3162]: KEYMAP: de-latin1-nodeadkeys Mai 18 21:12:27 eddie display-manager[3162]: Command: localectl set-keymap de-latin1-nodeadkeys Mai 18 21:12:27 eddie display-manager[3162]: I: Using systemd /usr/share/systemd/kbd-model-map mapping Mai 18 21:12:27 eddie display-manager[3162]: Starting service kdm..done Mai 18 21:12:27 eddie systemd[1]: display-manager.service: PID file /var/run/displaymanager.pid not readable (yet?) after start: No such file or directory Mai 18 21:12:27 eddie kdm_config[3188]: Multiple occurrences of section [General] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:12:27 eddie kdm_config[3188]: Multiple occurrences of section [Xdmcp] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:12:27 eddie kdm_config[3188]: Multiple occurrences of section [X-*-Core] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:12:27 eddie kdm_config[3188]: Multiple occurrences of section [X-*-Greeter] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:12:27 eddie kdm_config[3188]: Multiple occurrences of section [X-:*-Core] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:12:27 eddie kdm_config[3188]: Multiple occurrences of section [X-:0-Core] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them. Mai 18 21:12:27 eddie systemd[1]: Started X Display Manager. Mai 18 21:12:27 eddie kdm[3187]: plymouth is NOT running Mai 18 21:12:29 eddie kdm_greet[3320]: Cannot load /usr/share/kde4/apps/kdm/faces/.default.face: Datei oder Verzeichnis nicht gefunden Mai 18 21:12:38 eddie kdm[3319]: :0[3319]: pam_unix(xdm:session): session opened for user marix by (uid=0)

2 1

[opensuse] What happend to Firefox on 42.3 -> 52.8ESR or something to 60 but no session restore - all tabs nonrestored
by cagsm 18 May '18

18 May '18

Hi there, today some leap 42.3 system booted up and zypper dup, which probably brought in firefox 60 on this system, default repos. I think I remember that it was firefox 52.something ESR so far, today it became firefox 60 My tabs are coming back being displayed in the single main firefox window. but all tabs are empty, the address url is being shown in the address bar, but i cant even f5 refresh or the reload icon is grey, i need to navigate into the address area for each and every tab and press enter to make it load again. once the tabs content is loaded, i can again f5 refresh and all. what happend to the firefox session state or the related technical details? is this some known bug? I havent observed this on windows systems, those werent running esr though, but normal main firefox release branch at the point when the updated to 60.x what happen? thanks. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] SUSEConnect
by Dave Howorth 18 May '18

18 May '18

I've just noticed an update for SUSEConnect on my Leap 42.3 box. Why is SUSEConnect installed on a Leap machine? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 8

[opensuse] No sound on Pi3?
by Robert Schweikert 18 May '18

18 May '18

Hi, Having a bit of trouble getting a Pi3 to play music (mp3) files :( Have a Sound Blaster Play! 3 USB , info below, and I can play the test sound form YaST sound configuration module. Yet when I want to play music using Rhythmbox, there's no sound. I installed PulseAudio but when I run pavucontrol all I get is "Establishing connection to PulseAudio. Please wait..." . That message persists even after 5 minutes. The "Audio Mixer" in the xfce setting manager provides me information as in "GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem." The information is good but doesn't really help me help myself :(, installed gestreamer packages below. If I start "pulseaudio" in a terminal and then run "pavucontrol" the only "Output Device" I can see is the "Dummy Output". Thus it appears that my problem the recognition of the Sound Blaster USB sound device, although YaST sees the device and can play the test sound. Help is appreciated. Thanks, Robert # hwinfo --sound 08: USB 00.0: 0401 Multimedia audio controller [Created at usb.122] Unique ID: dwDZ.FvZfYAT6+w3 Parent ID: ADDn.IKhPgutgmvF SysFS ID: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0 SysFS BusID: 1-1.3:1.0 Hardware Class: sound Model: "Creative Sound Blaster Play! 3" Hotplug: USB Vendor: usb 0x041e "Creative Technology, Ltd" Device: usb 0x324d "Sound Blaster Play! 3" Revision: "1.06" Serial ID: "00017650" Driver: "snd-usb-audio" Driver Modules: "snd_usb_audio" Speed: 12 Mbps Module Alias: "usb:v041Ep324Dd0106dc00dsc00dp00ic01isc01ip00in00" Driver Info #0: Driver Status: snd_usb_audio is active Driver Activation Cmd: "modprobe snd_usb_audio" Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #13 (Hub) # rpm -qa | grep gstreamer gstreamer-0_10-plugins-base-0.10.36-17.1.aarch64 gstreamer-1.8.3-4.1.aarch64 gstreamer-plugins-good-1.8.3-8.1.aarch64 gstreamer-plugins-farstream-0.2.8-3.1.aarch64 libgstreamer-1_0-0-1.8.3-4.1.aarch64 gstreamer-0_10-0.10.36-18.1.aarch64 gstreamer-plugins-ugly-1.8.3-4.2.aarch64 gstreamer-plugins-base-1.8.3-7.2.aarch64 gstreamer-0_10-plugins-base-lang-0.10.36-17.1.noarch gstreamer-0_10-plugins-good-0.10.31-20.1.aarch64 libgstreamer-0_10-0-0.10.36-18.1.aarch64 gstreamer-plugins-bad-1.8.3-7.1.aarch64 PackageKit-gstreamer-plugin-1.1.3-4.2.aarch64 gstreamer-plugin-gstclutter-3_0-3.0.18-3.1.aarch64 -- Robert Schweikert MAY THE SOURCE BE WITH YOU Distinguished Architect LINUX Team Lead Public Cloud rjschwei(a)suse.com IRC: robjo

4 7

[opensuse] NFS: nfs4_reclaim_open_state: Lock reclaim failed!
by Per Jessen 18 May '18

18 May '18

I'm installing a bunch of new leap15 systems, all real iron, with root on nfs, version 4.1. On the client, I keep getting loads of these messages: NFS: nfs4_reclaim_open_state: Lock reclaim failed! I know it's a long shot, but does anyone recognise that? -- Per Jessen, Zürich (15.5°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] Firefox 60 on Leap 42.3?
by Dave Howorth 18 May '18

18 May '18

I just went to online update in Leap 42.3 and see there is one for Firefox from 52.8.0 to 60.0. That seems like quite a jump and again its surprising to see a major version change pushed as an update partway through a release's lifecycle. I expect that updating Firefox is going to cause me grief to get it back the way I like it at a minimum, and perhaps break some of my add-ons. I expect to have to deal with grief like that when I update my distro version, not at random intervals in between. If I wanted system that needed continuous tender loving care, I would choose Tumbleweed. So what's going on? First LibreOffice, now Firefox? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 20

[opensuse] Problems with Netflix remain in Firefox 60.0
by don fisher 18 May '18

18 May '18

I am running leap 42.3 and have just upgraded Firefox to 60.0. I have removed all of the vendor specific Flash option I had previously installed for YouTube. I still receive the message: Netflix Video Player Unavailable We're having trouble playing Netflix on your browser. Please make sure you have an official version of Firefox. Error Code:F7355 I have spent more than an hour with Netflix support and cannot get them to tell me what they video player they are looking for. I find it sad the level of expertise present in commercial online support. Does anybody have any suggestions? Many others say the have it working, so I find this a real nuisance. Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] repodata
by George from the tribe 18 May '18

18 May '18

Anyone know what is going on with the standard opensuse repos? I am getting this error for both the oss and non-oss repositories: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/distribution/leap/42.3/repo/non-oss/' The url is the one that comes directly from the opensuse website. Checking on that side, the folder /repodata does not exist. This is the 2nd day in a row I have seen this error and not been able to refresh my repositories. -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 42.3 | Gnome 3.20 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 42.3 | Gnome 3.20 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 11

[opensuse] Firefox 60: problem with tumblr
by Daniel Bauer 17 May '18

17 May '18

When I open my tumblr page in firefox now it appears as if I would have been logged out, or the cookie deleted. But when I click on the tumblr logo, a new window opens with my dashboard and I am obviously already logged in. If from that dashboard I try to open any link to any other tumblr (or to mine) in a new tab or window, again I have the "logged-out-view", eg no reblog, like icons and that stuff you have when logged in. How can I make that I stay logged in in several tabs, windows? This is quite strange... (at present all extensions are desabled, cookies accepted) -- Daniel Bauer photographer Basel Barcelona https://www.patreon.com/danielbauer http://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] DBus type services in Systemd user mode
by Matthias Bach 16 May '18

16 May '18

Hi, I am having an issue with starting Systemd services with Type=dbus in Systemd's user mode on openSUSE Leap 42.3. Specifically I am trying to use GameMode [1] but the problem seems to be a generic one. E.g., I have found several services in /usr/lib/systemd/user/ that have Type=dbus, are shipped with openSUSE, fand fail to start. E.g.: > systemctl --user start gvfs-daemon Failed to start gvfs-daemon.service: Unit dbus.socket failed to load: No such file or directory. There indeed is no dbus.socket file in /usr/lib/systemd/user/. Should there be? I'd assume that gvfs-daemon and glib-pacrunner are actually used in Gnome, so how can they be launched then? Any hints as to where I went wrong would be highly appreciated. Kind Regards, Matthias [1]: https://github.com/FeralInteractive/gamemode -- Dr. Matthias Bach www.marix.org „Der einzige Weg, die Grenzen des Möglichen zu finden, ist ein klein wenig über diese hinaus in das Unmögliche vorzustoßen.“ - Arthur C. Clarke

4 8

[opensuse] rpmbuild and %%ARCH%%
by Roger Oberholtzer 16 May '18

16 May '18

I am using rpmbuild to make an RPM. I want to set the file name of the RPM by this option: --define "_rpmfilename %%{NAME}-%%{VERSION}-%%{ARCH}.rpm" My .spec file has this: Name: SomeName Version: SomeVersion The NAME and VERSION in the generated name are fine. But the ARCH is a mystery. It gets set to "i586". On the build system, "uname -a" reports: Linux os13-1 3.11.6-4-desktop #1 SMP PREEMPT Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) i686 athlon i386 GNU/Linux So I would expect any of these: i686 athlon i386 Not i586. What I really want is what "uname -i" provides. Which is "i386". But I do not seem to get that. Is there an RPM macro that is what uname -i lists? I have looked around in what rpmbuild --showrc reports. But I do not see this. The reason I want to use a variable here is that this should also build on a x86_64. On that type of system rpmbuild uses the expected value. Which is no suprise because that is reported for all values: Linux acme 4.4.126-48-default #1 SMP Sat Apr 7 05:22:50 UTC 2018 (f24992c) x86_64 x86_64 x86_64 GNU/Linux -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Yast module to configure ACPI power-button to suspend?
by David C. Rankin 16 May '18

16 May '18

All, I'm looking for the openSuSE way to configure my laptop power-button to suspend instead of power-off. Is there a yast module or some similar app for tweaking ACPI config that avoids writing a custom event-handler from scratch? Is there a current event-handler that can be tweaked? I would like the power-button to activate suspend just like lid-close does. There are a number of lacpi_id listed during boot, e.g. $ dmesg | grep acpi [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.162541] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.826877] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.829522] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.829524] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.889085] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.300854] acpi LNXPWRBN:00: hash matches [ 5.746644] acpi device:01: registered as cooling_device0 However, the only button interface configured in /proc/acpi/button is 'lid'? $ ll /proc/acpi/button/ total 0 dr-xr-xr-x 3 root root 0 May 14 12:45 lid On Leap 42.3 the kernel module for the button is present /lib/modules/4.4.126-48-default/kernel/drivers/acpi/button.ko What is the best way to configure the power-button to suspend? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 11

[opensuse] User Nobody
by John Andersen 15 May '18

15 May '18

Is it customary and usual for User nobody to have /bin/bash as a shell? It seems that Opensuse is the only linux I have that allows this. Most have nologin or /bin/false. -- After all is said and done, more is said than done. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 12

[opensuse] jwplayer playback in Firefox 52ESR - missing codec?
by gumb 15 May '18

15 May '18

I don't generally have problems playing videos around the Internet but I've stumbled across one that causes issues on my Leap 42.3 machine. See for example this page (the large video at the top): https://retro.tcl.fr/les-travaux-du-metro-de-la-croix-rousse/ I only see a black background with a badly coded (only partially visible) and annoyingly blasé message at the top saying 'in order to view the video, update your browser.' I'm on the standard Firefox 52.8.0ESR release from the Leap update repo. If I try with the latest Opera I see the video keyframe but playback still fails. However, on another box running a different Linux distro and with Firefox 58.0.2 (Quantum) the video plays fine. The info on the video leads me to jwplayer.com, where all the demo videos play fine on my openSUSE machine, so since it seems to be HTML5-based I don't know what specific codec this troublesome video is using. Does anybody running FF52ESR on Leap have it working? gumb -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 11

[opensuse] copying photos from iPhone to Leap 42.3
by Dave Howorth 15 May '18

15 May '18

I'm trying to copy some photos from an iPhone to my openSUSE 42.3 box and am getting myself confused. Can anybody tell me the best way to do it, or point me to some simple but complete instructions? I've been following instructions from various web pages. I found something called ifuse and installed that. I plugged in the phone to a USB port and clicked Allow on the dialog the phone presented asking permission for the PC to access stuff. Leap asked me whether I wanted to open a file manager for the device, so I said yes and it opened PCManFM, and in the list of places at the left it showed an ejectable filesytem for the phone, but no photos and I couldn't figure how to access them. Following another hint, I started shotwell (not a program I normally use) and it came up and showed me all the photos on the phone, so at least I know that the USB connection is working. So I clicked on Import All but it failed to import any photos. The log is full of lines like: IMG_0003.JPG error message: [-107] Error retrieving file object for /store_feedface/DCIM/100APPLE/IMG_0003.JPG: Unknown error I can't even seem to find something that tells me where shotwell actually stores imported photos to double check. So I went back to PCManFM but now it isn't even showing the phone's filesystem! Help! Can anybody tell me the best way to copy the photos from the phone, or point me to some simple but complete instructions? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] It's all my fault
by Mark Misulich 14 May '18

14 May '18

Hi, I gooned it up. I downloaded the tarball for rkhunter-1.4.4 from SourceForge some time ago, extracted it, and moved it to it's own folder before installing it. A few days ago, I downloaded the tarball for rkhunter-1.4.6 from SourceForge, extracted it, and installed it from the Downloads folder. I didn't move it to the folder that contained rkhunter-1.4.4. Now, rkhunter won't work. When I try to run rkhunter, konsole can't find it (opensuse leap 15.0). I tried to run rkhunter-1.4.4 and it brings the same result. I uninstalled rkhunter-1.4.4 using ./installer.sh --remove, same for rkhunter-1.4.6. Then I tried to install rkhunter-1.4.6 using ./installer.sh --install. The readout in konsole says its installed, but konsole readout says it can't find it. I then used dolphin to find every file for rkhunter, and removed them. then I tried to install rkhunter-1.4.6 using ./installer.sh --install. It installs perfectly, but when I try to run it, konsole can't find it. How do I fix this? Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Leap 15 live
by jdd＠dodin.org 14 May '18

14 May '18

May be you know this already, but Leap 15 is also available as a wonderful live: https://download.opensuse.org/distribution/leap/15.0/live/ wonderful, because it's taking all the available room on a usb device. Yes, it takes all the room of, say, a 16Gb usb pen (preferably usb3), so all what you do is written, you can even make an update. great!! it's a small iso, under 1Gb, and after that it's "overlayed", I guess some sort of snapshot, and all the rest is written on ext4 partition seems to even be installable, that is there is an "install" icon on the desktop (not tested yet) seems to be a very good solution to my portable install... thanks all! jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 21

[opensuse] Netflix on OpenSuse 42.3
by don fisher 14 May '18

14 May '18

I am running Thunderbird 52.7, X86_64, under leap 42.3. I am trying to get Netflix running under opensuse. I searched the "Unofficial guide to openSuse Leap 42.3" and found no mention of Netflix. With a Google search I found many proposed solutions, but many earlier solutions via Windows were obsoleted by time. I can not find a Netflix app under Mozilla extensions, though there are a few other apps that enhance Netflix, with the assumption that it is running. I found one page that stated that, after a long period of time, "Linux Users Can Easily Watch Netflix On Firefox". Basically the addition of HTML5 allowed the breakthrough. Can anybody shed light on the steps required to bring up Netflix on Leap 42.3? Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 26

[opensuse] Opensuse Leap and GIMP 2.10
by Per Inge Oestmoen 13 May '18

13 May '18

Hello! I now run Leap 42.3. And I tried to install GIMP 2.10 on it, but quickly entered dependency hell. I suppose there is no way to install GIMP 2.10 in a fast way on 42.3, or is it? If not: Will the upcoming Leap 15 contain GIMP 2.10x? -- Noise reduction is just another word for image destruction. Per Inge Oestmoen, Norway -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 20

[opensuse] Can't paste images into email
by James Knott 13 May '18

13 May '18

One thing I do frequently is paste images I might find on a web site into an email. However, recently this no longer works. When I paste, instead of the image, I get a little square, containing what looks like the outline of a computer & keyboard. This happens with both Seamonkey and Firefox/Thunderbird. I can paste an image into Thunderbird on Windows. Has there been a change recently that causes this problem? I'm running OpenSUSE 42.3. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 38

[opensuse] sleeping & hibernating difficulties
by David T-G 12 May '18

12 May '18

Hi, all -- I have a Dell e6540 running Leap 42.3 which does not reliably hibernate or sleep from the Plazma start menu nor sleep from the power button. It will sometimes just NOT go there, but mostly it acts like it's trying to go dark but then comes back. Any thoughts or tips? TIA & HANW :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 5

[opensuse] Re: jwplayer playback in Firefox 52ESR - missing codec?
by gumb 11 May '18

11 May '18

On 11/05/18 22:57, Bjørn Lie wrote: > What does the following command print (the --dry-run means it's just a > test, nothing will actually happen) (note that it has to be on one > single line in a terminal) > > sudo zypper install --force-resolution --dry-run --capability > 'libavcodec57(unrestricted)' 'libavcodec56(unrestricted)' Loading repository data... Reading installed packages... 'libavcodec56' providing 'libavcodec56(unrestricted)' is already installed. 'libavcodec57' providing 'libavcodec57(unrestricted)' is already installed. Resolving package dependencies... Nothing to do. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] other backup strategy with rsync
by jdd＠dodin.org 11 May '18

11 May '18

Hello, I need some hints around the rsync use. I'm very concerned by backup/archives. I already have viable archive system for important data (redundant) and clonezilla o my main disk. But all this needs manual work, and takes some time (max one hour), where the computer is either offline or not really usable. So it's done randomly at too long intervals in my feeling. I also have a very cheap unused online server with 2Tb data, to be related with the 500Gb size of my main disk. So I want to use this server as backup. For example an hourly backup, somewhat incremental, where I could find a copy of whatever file I may have deleted since the last real backup/archive. what may be the rsync syntax to a cron job to backup root and /home like this? rsync or any other simple tool. date can be limited to, say, three month in the past, and all what is older removed if no more present thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] opensuse old repos?
by Mark Hounschell 11 May '18

11 May '18

I know it sounds stupid but does anyone know where I might find update repos for 11.4? Thanks Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] 15.0 won't mount EFI System sdb1 partition
by Felix Miata 11 May '18

11 May '18

This M.2 device I just bought turned out to be used instead of new as expected. So, I wanted to see what's on it. Booted normally to a /dev/sda filesystem, trying to mount -t vfat or -t auto just gives a generic error "wrong fstype, bad option, bad superblock, blah blah". -t auto worked just fine for NTFS sdb3. What's the secret to examining an EFI System partition when the one used for booting is already on /boot/efi/? Man mount doesn't seem to make any mention of an EFI System partition. -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 14

[opensuse] FF 52ESR complains about pulseaudio missing
by Felix Miata 10 May '18

10 May '18

42.3, recently installed FF 45.x plays online videos from www.doctoroz.com, but 52 plays no audio, complaining I "may" need to install pulseaudio. gstreamer1, libdvdcss2, libpulse0 and pulseaudio are installed. What's FF 52ESR complaining about? -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 11

[opensuse] sox with mp3 support
by David T-G 10 May '18

10 May '18

Hi, all -- I just tripped over "no handler for file extension `mp3'" in the stock SoX v14.4.2 on Leap 42.d. Bummer. It never occurred to me that it wouldn't be there because I've been using 14.4.0 (and probably earlier) on KNOPPIX forever. Is there an easy way to add it and/or is there an mp3-enabled SuSE RPM instead? TIA & HAND :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] OpenSUSE Dell PowerEdge 1900 and SAS1068
by Rejaine Monteiro 10 May '18

10 May '18

Hello guys. I'm trying to install OpenSuSE on an old Dell PowerEdge 1900 server with SAS1068 controller and 4 disks of 285GB each. The installation runs normally, however after the reboot, the operating system is not found (does not recognize the boot partition) At first I tried to create two mirror type arrays (2 disks per array). As it did not work, I then created two stripping arrays and lastly I tried to install it with no defined array, but none of the alternatives worked (no booting after OS installation). Any tips? -- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] How convert a Wmware Player machine into a VirtualBox virtual machine?
by Carlos E. R. 10 May '18

10 May '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Maybe I understood wrong, but I thought that Virtualbox could load directly vmware virtual machines. But it does not seem to be so. First I copied the virtual machine. It contains these files - none is VDI: Telcontar:/data/vmware/VirtualBox/openSUSE Tumbleweed # l -h total 15G drwxr-sr-x 2 cer vmware 4.0K May 6 20:28 ./ drwxrws--- 4 cer vboxusers 57 May 6 19:57 ../ - -rw-r--r-- 1 cer vmware 130 Aug 5 2015 Notas - -rw-r--r-- 1 cer vmware 15G May 6 20:21 OpenSUSE Tumbleweed-0.vmdk - -rw------- 1 cer vmware 73K May 6 20:21 OpenSUSE Tumbleweed.nvram - -rw------- 1 cer vmware 2.6M Aug 5 2015 OpenSUSE Tumbleweed.vmdk - -rw-r--r-- 1 cer vmware 0 Aug 5 2015 OpenSUSE Tumbleweed.vmsd - -rwxr-xr-x 1 cer vmware 2.8K May 6 20:21 OpenSUSE Tumbleweed.vmx* - -rw-r--r-- 1 cer vmware 274 Aug 6 2015 OpenSUSE Tumbleweed.vmxf - -rw-r--r-- 1 cer vmware 242K Apr 17 11:46 vmware-0.log - -rw-r--r-- 1 cer vmware 301K Feb 18 03:15 vmware-1.log - -rw-r--r-- 1 cer vmware 443K Feb 7 01:12 vmware-2.log - -rw-r--r-- 1 cer vmware 254K May 6 20:21 vmware.log One guide says that I have first to convert the machine to a Virtual Appliance first, using something called "OVFTool", "/usr/bin/ovftool" I guess. <https://www.admfactory.com/how-to-convert-vmware-to-virtualbox-virtual-mach…> But the instructions are for Windows, and I don't seem to get anywhere, but to an error I don't understand: Telcontar:/data/vmware # ovftool "Virtual Machines/openSUSE Tumbleweed/" "OVF/openSUSE Tumbleweed/" Opening OVF source: Virtual Machines/openSUSE Tumbleweed/openSUSE Tumbleweed.ovf Error: Failed to open OVF descriptor Completed with errors Telcontar:/data/vmware # It seems to want to open file "openSUSE Tumbleweed.ovf" which of course does not exist. That's what it is about, creating the appliance for migration. Another: <https://blogs.oracle.com/oswald/importing-a-vdi-in-virtualbox> says that I first have to create a new virtual machine in virtual box, but importing the "hard disk", which is supposed to be .vdi, but mine are .vmdk. Anyway, some links say vmdk works - but this method would not migrate the "hardware" of the machine, so to speak, only the hard disks. I'm confused. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlrvTVcACgkQtTMYHG2NR9VN2QCggEv2Scmy8laWmeffFxCZvC1t 2awAn3B21reydmNE0iIL/hEPEk90t8+M =3lJ7 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 18

[opensuse] 42.3 hugin in English ?
by opensuse＠rogerprice.org 09 May '18

09 May '18

I installed 42.3 hugin, the image stitcher. When I start it, it presents a window labelled in Dutch. I cannot find any way of getting a display in English. How is this done? Thanks, Roger -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 5

[opensuse] How to never check for updates?
by 712＠vivaldi.net 09 May '18

09 May '18

Hello, I'm new to the list and have just installed Leap 42.3 64bit with GNOME 3.20.2 on a Lenovo laptop. The laptop is intended for use in remote areas with low internet bandwidth. In order to reduce internet traffic as much as possible, I would like to prevent the system from checking for updates altogether when it's online in low-bandwidth areas. However, - I can't find the option to never check for updates in YaST2 > Online Update Configuration. - GNOME Software Updater configuration as described in Start-Up Guide, par. 9.4.3 Configuring the GNOME Software Updater... https://doc.opensuse.org/documentation/leap/startup/single-html/book.opensu… ...is not available on my system ("Software Settings" in the Settings app > All Settings isn't present.) What would be your preferred strategy to accomplish "never check for updates"? Hope you can help. Many thanks in advance. Regards, Fritz -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 8

[opensuse] Laptop advice
by Koenraad Lelong 09 May '18

09 May '18

Hi, I'm researching for a new laptop. I think the main issue is video. Is there a manufacturer I should avoid (NVidia/AMD) ? I like this one : HP Probook 450 G5 Notebook with Intel® i7-8550U (1.8GHz, 8MB Cache, 4 cores) and 2GB Discrete NVIDIA Graphics - 1LU52AV NVIDIA graphix is GeForce 930MX. TIA Koenraad. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

20 52

[opensuse] Persistent Leap 15 Live USB ?
by Andrei Borzenkov 09 May '18

09 May '18

Anyone knows if they support persistence across reboot? Quick test is VM lost changes and there in zero information in wiki (at least on live pages). Отправлено с iPhone -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] new user in linux
by Daniel Roma 08 May '18

08 May '18

Hello, I'm from Brazil. I'm currently at Ubuntu 14.04. I would like to test the opensuse on live cd.tem option to test the opensuse on live cd before installing? thank you

10 20

[opensuse] Thunderbird: 'autocrypt' and 'openpgp' appearing in HEADER
by Basil Chupin 07 May '18

07 May '18

Some may have noticed that over the past couple of weeks or so that the 'Normal' header[1] in _some_ posts has suddenly been displaying new entries called 'autocrypt' and 'openpgp' with the former containing many lines of alpha-numeric characters. See here: http://susepaste.org/48357201 Having the Header filled with these alpha-numeric characters is a PITA, but this can be easily remedied by doing a minor edit in the about:config file. To do this go to: Edit>Preferences>Advanced>Config Editor Do a search for 'autocrypt' and _delete_ 'autocrypt openpgp' in the 'Value' field. No need to restart Thunderbird. [1] View>Headers>Normal (as opposed to 'All') BC -- Always be nice to people on your way up -- you'll see the same people on your way down. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] x0.hosts and server interpreted entries
by Peter Suetterlin 06 May '18

06 May '18

Hi list, I'm playing with VDR on my TW system. It is started via systemd, and is running as another user (vdr). So the program is not allowed to open a window on my desktop :( I can overcome this using xhost si:localuser:vdr So following the xhost manpage, I put this in /etc/X0.host: si:localuser:vdr local: the second line is for testing. Because if I start the machine and type xhost, what I get is access control enabled, only authorized clients can connect LOCAL: So the si entry is ignored :(( Why isn't that working? I tried both capital and normal si, no way. All other settings do work, just not the si: one. Does anyone know the proper way to get this setting done permanently? Or is this a bug (where?) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 28

[opensuse] HP PhotoSmart C6180
by David T-G 06 May '18

06 May '18

Hi, all -- I hate printers, but ... you just can't get away from them, and it would be helpful to be able to print from my laptop instead of needing to go and borrow another. Ugh. I tried the YaST "Add New Printer" config and I can talk to it but cannot find any drivers when I search for "photosmart". Does anyone have any pointers to the simplest way to set up this sucker? Note that this is a older multi-function inkjet that probably relies on the PC to do the composition work, so my laptop will likely need a driver that will lay out the page and then send the rendered finished version for printing. Oh for the simple days of a LaserJet III that handled whatever you threw at it! :-) Anyway, I'd love any tips. TIA & HAND :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

Re: [opensuse] new user in linux
by Carlos E. R. 06 May '18

06 May '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Content-ID: <alpine.LSU.2.21.1805061512060.1880(a)Telcontar.valinor> El 2018-05-05 a las 11:03 -0300, Daniel Roma escribió: Ah, one little detail. :-) The correct thing here (generally) is reply to the list. If you are using gmail webmail, you have to hit reply to all, then delete the address of the person, leaving only the address of the mail list. I mention this because you replied to me in private, not on the list, so that you miss whatever other people may say. And it may be that the person you directed the post to might not know the answer. > after downloading, how to burn on dvd? Depends on what tools you have :-) Just as any other "image to DVD" procedure. You tell your burner software to burn from image, and when it asks what image, tell it. <https://www.opensuse.org/> Install Leap → <https://software.opensuse.org/distributions/leap> down... → How to burn a DVD on Linux. → <https://en.opensuse.org/SDB:Download_help#Using_Linux> There you have instructions for Linux, Windows, MacOS... - -- Saludos Carlos E. R. (desde openSUSE 42.3 x86_64 "Malachite" en Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlrvAJUACgkQtTMYHG2NR9VBfACfTKh+czfjDNMN53EbrhXzu+BO NpIAnRlfQz6d4TsrFE0R0jfnrRpowDzD =Fyn5 -----END PGP SIGNATURE-----

1 0

Re: [opensuse] How to never check for updates?
by 712＠vivaldi.net 06 May '18

06 May '18

On 2018-05-05 19:32, Dave Howorth wrote: > On Sat, 5 May 2018 18:47:53 +0200 > "Carlos E. R." <robin.listas(a)telefonica.net> wrote: > >> On 2018-05-05 16:25, 712(a)vivaldi.net wrote: >> > Thanks, Carlos and Dave, for your advice / remarks. >> > >> > On 2018-05-03 13:30, Dave Howorth wrote: >> >> On Wed, 2 May 2018 17:06:07 +0200 >> >> "Carlos E. R." <robin.listas(a)telefonica.net> wrote: >> >> >> >>> On 2018-05-02 16:08, 712(a)vivaldi.net wrote: >> >>> > Hello, >> >>> > >> >>> > I'm new to the list and have just installed Leap 42.3 64bit with >> >>> > GNOME 3.20.2 on a Lenovo laptop. >> >>> > >> >>> > The laptop is intended for use in remote areas with low internet >> >>> > bandwidth. In order to reduce internet traffic as much as >> >>> > possible, I would like to prevent the system from checking for >> >>> > updates altogether when it's online in low-bandwidth areas. >> >>> >> >>> uninstall package kit. >> >> >> >> Is that really necessary, just as a result of using gnome? >> > >> > What package should I install to be able to configure the GNOME >> > Software Updater as described here in 10.4.3: >> >> Gnome checks for updates and downloads them in advance, even if you >> decide to not install them, when it asks you later. At least it did >> the last time I checked. If you want to impede network activity by the >> updater, the only sure move is uninstall it. > > That isn't what the documentation Fritz posted a link to says. It says > you can stop it checking. > > But Fritz, I don't understand why you want to install yet another means > of automatic updating when what you want to do is disable automatic > updating? The GNOME Software Updater is working on this laptop, but the strange thing is that there isn't any configuration option to be found as described in the docs. So I assume that a configuration module is missing? > As Carlos says, you already have YaST. Why not use that? Yes, I like the YaST-on-demand-way of updating (which can be done at times when there is sufficient bandwidth) and uninstall + taboo the packagekit packages. Thank you Carlos and Dave, for your replies. Cheers, Fritz -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Tumbleweed and openssl
by Roger Oberholtzer 04 May '18

04 May '18

I'm updating a Tumbleweed system, which is basically up to date. The thing that remains is below. I'm not sure what the best answer is. I would suspect that it is Solution 3. But I do not want to mess up my system. So I'm asking for advice. I don't compile anything for openssl. So the devel package is not needed by me. Problem: libopenssl-1_0_0-devel-1.0.2n-2.1.x86_64 conflicts with libopenssl-devel > 1.0.2n provided by libopenssl-devel-1.1.0h-1.1.noarch Solution 1: Following actions will be done: keep obsolete libopenssl-1_0_0-devel-1.0.2m-1.1.x86_64 keep obsolete libopenssl1_0_0-1.0.2m-1.1.x86_64 keep obsolete openssl-1_0_0-1.0.2m-1.1.x86_64 keep obsolete libopenssl-devel-1.0.2m-1.1.noarch keep obsolete openssl-1.0.2m-1.1.noarch Solution 2: Following actions will be done: deinstallation of libopenssl-devel-1.0.2m-1.1.noarch deinstallation of ca-certificates-2+git20170807.10b2785-5.1.noarch deinstallation of python2-certifi-2018.4.16-32.1.noarch deinstallation of python2-pip-10.0.1-13.2.noarch deinstallation of python3-certifi-2018.4.16-32.1.noarch deinstallation of ca-certificates-mozilla-2.22-2.1.noarch deinstallation of python2-requests-2.18.4-3.1.noarch deinstallation of python3-pip-10.0.1-1.1.noarch deinstallation of python3-requests-2.18.4-3.1.noarch deinstallation of python2-docker-2.6.1-1.1.noarch deinstallation of docker-compose-1.17.0-2.1.noarch deinstallation of SUSEConnect-0.3.10-1.1.x86_64 deinstallation of mercurial-lang-4.5.3-1.1.noarch deinstallation of python-dockerpty-0.4.1-2.2.noarch deinstallation of docker-zsh-completion-17.09.1_ce-7.1.noarch deinstallation of docker-bash-completion-17.09.1_ce-7.1.noarch deinstallation of libpurple-branding-openSUSE-42.2-1.5.noarch deinstallation of rollback-helper-1.0+git20180419.3c7281d-2.1.noarch deinstallation of zypper-migration-plugin-0.11.1520597355.bcf74ad-1.1.noarch deinstallation of zypper-search-packages-plugin-0.4-1.1.noarch deinstallation of system-config-printer-applet-1.5.7-15.1.noarch Solution 3: deinstallation of libopenssl-1_0_0-devel-1.0.2m-1.1.x86_64 Solution 4: keep obsolete libopenssl1_0_0-1.0.2m-1.1.x86_64 -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Someone on the list is from Brazil?
by Daniel Roma 04 May '18

04 May '18

I would like to ask a question about the site an information you have on the project site opensuse, https://pt.opensuse.org/Popular_Principal for getting involved in one of the projects. thanks for your help

2 1

[opensuse] systemd automount
by Per Jessen 03 May '18

03 May '18

Is there any way of finding out what prevents a (supposedly idle) automount from expiring? I have these 2-3 automounts - 2018-04-29T11:33:31+02:00 newton systemd[1]: srv-mysql.automount: Got automount request for /srv/mysql, triggered by 2347 (cmahostd) 2018-04-29T11:33:31+02:00 newton systemd[1]: srv-www.automount: Got automount request for /srv/www, triggered by 2347 (cmahostd) 2018-04-29T11:33:31+02:00 newton systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 2347 (cmahostd) I was expecting /srv/mysql and /srv/www to expire at some point, and I don't see either in lsof output. I don't really mind, but because those mount points are not yet in use, it made me curious. -- Per Jessen, Zürich (20.6°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 25

[opensuse] enable 'ftp' on download servers?
by L A Walsh 03 May '18

03 May '18

Is it possible to enable ftp downloads on the distro servers? I was trying to be more finicky about what I downloaded short of writing a specialized script, and saw some might be done using wildcards ('*-xyz.rpm', etc), but it seems that only ftp supports wildcards due to it having a common looking display for listing files in a directory vs. http having no standard when it comes to displaying a directory. The alternative simplest way might be to download everything in the directory and throw files that don't match keep-patterns or keep those that do match them. Ideally, though, it would be preferable to avoid downloading anything not wanted/needed rather than filter after the fact. Trying to have a script that downloads only the files from relevant or wanted archs, that adapts to different types (binary, src, debug, update) for different distro types (static v. rolling), is more than a bit messy...ick. Anyway .. not a requirement, as for the dirs I want to use wildcards in are the ones most likely to benefit from a more intelligent download script -- but one that I don't have written right now when I was already needing to update some rpms with newer ones...erk... Anyway, it is a thought...if not too difficult.... thanks, -linda -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] import into Yast list of previously installed packages
by ken 02 May '18

02 May '18

Has anyone ever used the "Export" and then "Import" functions in Yast's "Software Management" section? If so, did it work? After searching quite a bit for documentation and/or discussion on that feature (?), I found only this: https://forums.opensuse.org/showthread.php/497411-import-package-list which was doubtful... but that discussion was from four years ago, so perhaps there have been positive developments. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] LibraOffice 6
by James Knott 02 May '18

02 May '18

I see LibraOffice 6 is now installed on my system (I noticed the different splash screen). I thought it supposed to wait for the next release of OpenSUSE. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 8

[opensuse] Google chrome repo missing the stable version
by Carlos E. R. 01 May '18

01 May '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I see that the google chrome repo is missing the stable chrome version, now only has Beta and Unstable (in YaST view of the repo, FF can not browse it). <http://dl.google.com/linux/chrome/rpm/stable/x86_64> Has the repo changed URL or something? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlroSuMACgkQtTMYHG2NR9W1FACfbxO/s7enW4ifhfnhTTNep3Mt Ha8AoI6IDzS7YehVUzBb+RGcj/oBAcrM =9q6t -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 15

[opensuse] libreoffice white theme
by jdd＠dodin.org 01 May '18

01 May '18

Hello, I think I already asked for that, but I now can't find an answer: present libreoffice theme is black. For my eyes it's totally unreadable, I can't see white letters on black paper. I speak of the frame color, not icons of user text. This was not the case some (month?) ago... how can I find a white (or simply clear) theme on 42.3/plasma usual theme for kde is ok elsewhere? I installed gnome libre office version, but do not find how I can use it :-( thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Leap 15 as Vmware Host
by John Andersen 01 May '18

01 May '18

Has anyone been able to get Leap 15 run Vmware as a host, specifically Vmware 12 branch? Was going to switch to VirtualBox, but those packages in opensuse repositories are back level as well. -- After all is said and done, more is said than done. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 14

[opensuse] Separate xscreens troubles
by Mark Hounschell 30 Apr '18

30 Apr '18

I posted this over on the SuSE-KDE forum yesterday but got no response yet so thought I would throw it out here to see if anyone has this working in Leap. I'm running Leap 42.3 KDE/Plasma and am having difficulties getting this configuration to work as it did/does in SuSE-13.2. I am using Nvidia's proprietary driver and its nvidia-settings pgm to configure it. It appears to try to work but not good enough. For instance, to just describe a couple of things: I set my display via "export DISPLAY=:0.1" then start an application like konsole. It does start on the correct DISPLAY but the minimize/maximize and exit buttons don't show up. If I right click somewhere in DISPLAY :0.1, I get no response like I do in 13.2. Some application buttons in some applications don't show up at all or ignored when clicked on. When I send Yast2 to a separate xscreen it doesn't even show up yet it is running. The nvidia-settings pgm creates an /etc/X11/xorg.conf file. It it possible that these seperate xscreen settings should be somewhere in /etc/X11/xorg.conf.d instead? Can someone say for certain that this even works in Leap? Thanks Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] Downgrade GTK-binding
by John Andersen 29 Apr '18

29 Apr '18

Richard Brown's naming conventions strikes! ;-) Updates pushed onto my upgrade to Leap-15 asked to downgrade gtk-bindings-yadda-yadda-42.2 to yadda-yadda-15.0 Just checking the downgrade option worked, of course. This is the first time ive been asked to do this, so there must be some something over-riding strictly name based dependencies that was missed on this one. -- After all is said and done, more is said than done. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] graphic display blinks
by jdd＠dodin.org 29 Apr '18

29 Apr '18

Hello, Here I just ask for general debug ideas, as the relevant computer is not in my hands, but I may have to work on it or it's brothers some day. it's an old computer, 7 years old, but sufficient and 64 bits, but only 2Gb ram. Intel graphics. Desktop. I first installed tumbleweed 32 bits, then (today) tested live Leap 15, with same result: when started as init 3 (number 3 added at the end on grub linux line), works. When started as default, the screen blinks with around 1/2s frequency, obviously its's X that stops and restart as the keyboard is nearly not responsive (unusable). I tried nomodeset, vga on linux grub line, same result start X from terminal and blinking, the blinking continues even after the return under terminal. But... opensuse 12.1 works as expected I could install 13.2 32 bits from live usb and it worked with graphics nothing visible in X logs, apart the last line (stopped on error (1)) what can I save as ideas to test next time? the problem was visible at my LUG meeting but also at the owners home (different monitor) thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 9

[opensuse] Plymouth startup
by Bjarne Örn Hansen 29 Apr '18

29 Apr '18

Hi, Whenever I start my computer, I get this annoying three dots as a startup screen in plymouth. I am running Tumbleweed, and I am seeing that this has been an issue with nVidia drivers for a loooooooong time. Why is this, still an issue? // Bjarne -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] leap 42.3, today libreoffice version suddenyl upgraded
by cagsm 28 Apr '18

28 Apr '18

hi there thought opensuse wouldnt do these major upgrades of projects or packages but rather patches and smallish version increases today on leap 42.3 some libreoffice 5.4.x suddenly upgraded itself to 6.0.3 methinks via zypper up what is the general plan for upgrades? there was arguing in the past e.g. firefox and then firefox esr comes to my mind and the reluctance of advancing the latest firefox releases and instead the maintainer switching over to firefox esr in recent months. any explanation on these decisions and when an upgrade is fit for deployment or when smallish version number increases are rather used instead? tia. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 21

[opensuse] separate browser logins vs separate instance X display
by David T-G 28 Apr '18

28 Apr '18

Hi again, all -- I have multiple cloud accounts (A, B, ...) and access them all at the same time. One way to do that is to click the little account tab and change the login (A, B, ...) in the browser. Another way is to have separate users (A@wench, B@wench, ...) on my laptop and fire off the browser as that user and display it on my (davidtg@wench) screen after running xhost. Any thoughts on which approach is cleaner, faster, better in general? TIA again & HAND :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 17

[opensuse] plymouthd stuck taking 5% CPU after systemd timers fired at 45 min past hour ??
by David C. Rankin 28 Apr '18

28 Apr '18

All, I've never seen this before on 42.2 or 42.3, but when the systemd timers fired for the cleanup, plymouthd got stuck consuming 5% of the CPU and has been for the past 15 minutes. Weird, e.g from the journal: Apr 25 00:45:01 wizard cron[12111]: pam_unix(crond:session): session opened for user root by (uid=0) Apr 25 00:45:01 wizard systemd[1]: Created slice User Slice of root. Apr 25 00:45:01 wizard systemd[1]: Starting User Manager for UID 0... Apr 25 00:45:01 wizard systemd[1]: Started Session 322 of user root. Apr 25 00:45:01 wizard systemd[12112]: pam_unix(systemd-user:session): session opened for user root by (uid=0) Apr 25 00:45:01 wizard systemd[12112]: Reached target Sockets. Apr 25 00:45:01 wizard systemd[12112]: Reached target Timers. Apr 25 00:45:01 wizard systemd[12112]: Reached target Paths. Apr 25 00:45:01 wizard systemd[12112]: Reached target Basic System. Apr 25 00:45:01 wizard systemd[12112]: Reached target Default. Apr 25 00:45:01 wizard systemd[12112]: Startup finished in 17ms. Apr 25 00:45:01 wizard systemd[1]: Started User Manager for UID 0. Apr 25 00:45:01 wizard CRON[12111]: pam_unix(crond:session): session closed for user root Apr 25 00:45:01 wizard systemd[1]: Stopping User Manager for UID 0... Apr 25 00:45:01 wizard systemd[12112]: Reached target Shutdown. Apr 25 00:45:01 wizard systemd[12112]: Stopped target Default. Apr 25 00:45:01 wizard systemd[12112]: Stopped target Basic System. Apr 25 00:45:01 wizard systemd[12112]: Stopped target Paths. Apr 25 00:45:01 wizard systemd[12112]: Stopped target Sockets. Apr 25 00:45:01 wizard systemd[12112]: Stopped target Timers. Apr 25 00:45:01 wizard systemd[12112]: Starting Exit the Session... Apr 25 00:45:01 wizard systemd[12112]: Received SIGRTMIN+24 from PID 12136 (kill). Apr 25 00:45:01 wizard systemd[12116]: pam_unix(systemd-user:session): session closed for user root I presume that is some 15 minute timer that fires -- because there is the same thing at 00:30:01 and again at 00:00:01, but at the 45 minute firing, I'm stuck with: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 247 root 20 0 65544 19320 3076 S 5.316 0.238 243:23.29 plymouthd What is going on? I'll reboot for now, but this is very bizarre... -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 32

Re: [opensuse] How to specify paper try in print jobs
by don fisher 28 Apr '18

28 Apr '18

On 04/27/2018 04:16 PM, don fisher wrote: > On 04/26/2018 08:56 PM, Carlos E. R. wrote: >> On 2018-04-27 01:07, don fisher wrote: >>> I again hope this is an easy one, but how does one select which tray >>> paper comes from. If I put photo paper in one tray, and plain paper in >>> the another, how does one tell the application which paper to use? >> >> It depends on the printer. You can probably set a default tray, but you >> can also select the tray somewhere in print options each time you print >> something. >> >> I have never tried to do this from the command line, but looking at "man >> lpr" I see "-o option[=value]". You would then have to find the >> appropriate option and value pair. >> >> So use "lpoptions" to find out. Try "lpoptions -l". On mine I see: >> >> >> cer@Telcontar:~> lpoptions -l >> HPServicesWeb/Internet Services: *SupportAndTroubleshooting >> ProductManuals CheckForDriverUpdates OrderSupplies >> PageSize/Page Size: Letter Legal Executive w612h935 4x6 5x8 *A4 A5 A6 B5 >> w283h425 w553h765 w522h737 w558h774 Postcard DoublePostcard Env10 >> EnvMonarch EnvISOB5 EnvC5 EnvDL Custom.WIDTHxHEIGHT >> InputSlot/Paper Source: *Auto Tray1 Tray2 Tray1_Man >> ... >> >> and many more, but you already see a Tray in there. >> >> So let's try: >> >> >> cer@Telcontar:~> lpoptions -o InputSlot=Tray1 >> cer@Telcontar:~> lpoptions -l >> HPServicesWeb/Internet Services: *SupportAndTroubleshooting >> ProductManuals CheckForDriverUpdates OrderSupplies >> PageSize/Page Size: Letter Legal Executive w612h935 4x6 5x8 *A4 A5 A6 B5 >> w283h425 w553h765 w522h737 w558h774 Postcard DoublePostcard Env10 >> EnvMonarch EnvISOB5 EnvC5 EnvDL Custom.WIDTHxHEIGHT >> InputSlot/Paper Source: Auto *Tray1 Tray2 Tray1_Man >> ... >> >> See? Changed. >> >> So to print from tray 1 I would use: >> >> lpr -o InputSlot=Tray1 filetoprint >> >> > Thanks. Problem appears to have been with my media type. Types listed > under Yast do not appear to match those displayed on the printer. I set > all media types to plain, and then the: > lpoptions -o InputSlot=Tray3 or Tray2 > commands do work. I can remember what type of paper is in each tray. > > Thanks again, > Don > > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Leap Download page
by ellanios82 27 Apr '18

27 Apr '18

<https://software.opensuse.org/distributions/leap> on Leap download page , could not spot "Torrent" file : where to look please ? ..... regards -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] How to specify paper try in print jobs
by don fisher 27 Apr '18

27 Apr '18

I again hope this is an easy one, but how does one select which tray paper comes from. If I put photo paper in one tray, and plain paper in the another, how does one tell the application which paper to use? Thanks Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] visiontek dock
by jp list 26 Apr '18

26 Apr '18

Hi everyone, I got an visiontek Universal DUAL 4K USB DOCK, https://www.visiontek.com/dual-4k-usb-dock.html displays are not working in opensuse 42.3 ... anyone have luck with this device ? thank you -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Brand new VM with tumbleweed read only???
by Greg Freemyer 26 Apr '18

26 Apr '18

All, I haven't use btrfs much yet. Yesterday, I created a new Tumbleweed VM inside Virtualbox (hosted on a Win 10 PC) and accepted the default btrfs. I've barely done anything with it yet, but admittedly I have rebooted several times. I think I did a clean poweroff each time. When I run "zypper in mariadb" I get: == Error: Subprocess failed. Error: RPM failed: error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Read-only file system) == But mount doesn't show /var as readonly: == # mount | grep var /dev/sda2 on /var type btrfs (rw, ..., subvol=/@/var) overlay on /etc type overlay (rw, relatime, lowerdir=/sysroot/etc,upperdir=/sysroot/var/lib/overlay/etc,workdir=/sysroot/var/lib/overlay/work-etc) == [I typed the above, so beware of typos.] Is there a easy fix, or should I just blow this VM away recreate with btrfs in the loop? Thanks Greg -- Greg Freemyer Advances are made by answering questions. Discoveries are made by questioning answers. — Bernard Haisch -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 6

[opensuse] leap 15.0 gcc?
by Mark Hounschell 26 Apr '18

26 Apr '18

Leap 42.3 had gcc 4.8 as default and 7.x as an option. Leap 15.0 has gcc 7.3 as default but so far no gcc 4.8 as an option. I this going to change before the release of 15.0? Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Two questions
by John Andersen 25 Apr '18

25 Apr '18

What are .aug files? Seeing a lot of these in /usr/share/augeas/lenses/dist/ under Leap 15 I've traced it to http://augeas.net/index.html but Have no idea why it is on my machine. Second Why does this happen: jsa@poulsbo:~> locate updatedb /etc/updatedb.conf /usr/bin/updatedb ... jsa@poulsbo:~> sudo updatedb [sudo] password for jsa: jsa@poulsbo:~> locate updatedb locate: can not open `/var/lib/mlocate/mlocate.db': Permission denied jsa@poulsbo:~> Why does /var/lib/mlocate/mlocate.db get set as owned by root/root? (Not accepting the "security" nonsense, its a single user machine, and I want to find things that my normal user account can't see.) You will note that after some time, I am again able to use locate, so something seems to change its permissions somewhere along the line. This is the only version of Linux I've ever run into where this happens. -- After all is said and done, more is said than done. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 40

[opensuse] Leap 15.0 live - Legacy boot from USB and DVD ??
by Radule Šoškić 25 Apr '18

25 Apr '18

Hi, I tried to boot my old Lenovo R61 to Leap 15.0 live, from USB and from DVD, but it didn't work. Both L15 media boot my other computers ok, and other bootable media boot my Lenovo fine. I am thinking of EFI. My R61 has no EFI. I wander if L15 doesn't support boot on legacy BIOS machines? Is there anybody on list to confirm or oppose this? Best regards, R.Soskic

7 37

[opensuse] clamav outdated for 42.3
by David C. Rankin 25 Apr '18

25 Apr '18

I know releases are generally a "dance-with-the-one-that-brung-you" proposition, but for security related packages, they should probably be updated, e.g. [15:03 wizard:/tmp/tmp-david] # zi clamav ... Selecting 'clamav-0.99.4-23.1.x86_64' from repository 'Main Update Repository' for installation. Resolving package dependencies... Force resolution: No The following 2 NEW packages are going to be installed: clamav 0.99.4-23.1 libmilter1_0 8.15.2-6.1 2 new packages to install. Overall download size: 4.3 MiB. Already cached: 0 B. After the operation, additional 13.7 MiB will be used. Continue? [y/n/...? shows all options] (y): ... [15:03 wizard:/tmp/tmp-david] # freshclam ClamAV update process started at Tue Apr 24 15:03:56 2018 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.99.4 Recommended version: 0.100.0 DON'T PANIC! Read http://www.clamav.net/documents/upgrading-clamav -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Leap 42.3 is supported, but contains unmaintained packages?
by Bjoern Voigt 24 Apr '18

24 Apr '18

I wonder about the following comment on bug #1089987 (https://bugzilla.opensuse.org/show_bug.cgi?id=1089987) > Please note that mysql-community-server in openSUSE Leap 42.3 is marked as EOL and therefore unmaintained: > > https://build.opensuse.org/request/show/507283 This rises some questions: 1) How do I know that some official packages in openSUSE 42.3 are unsupported (and thus potentially unsafe)? (Only very few MySQL/openSUSE users may read the bug reports and build service requests.) 2) If a package gets unmaintained, how do I get the notice? Personally I currently create my own fixed MySQL 5.6.40 version on openSUSE build service. But I a bit unsure and disappointed about the openSUSE security situation now. 3) Is there a openSUSE policy, which allows openSUSE to stay with unsafe packages? Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 9

[opensuse] Can somebody obtain this text from the installation DVD?
by Carlos E. R. 24 Apr '18

24 Apr '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, The installation of the Beta of 15.0 presents a warning that starts with: "you are installing the future openSUSE version not the stable" I'd like to add that text to the wiki (<https://en.opensuse.org/Portal:Leap/Things_to_know_about_betas>), but I failed to copy paste the text from a virtual machine (guest tools not running during the install, I guess). I tried to google and find the text, no hits. Somebody knows where I can download the exact text from? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlrfK98ACgkQtTMYHG2NR9V3EQCfZHho9rRFB+q7Qvw4XNAgDxx+ vM0An2y9Akp3ZnkcVHXJVDqLikscLfDs =0q9h -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] What means "Transactional server"?
by Carlos E. R. 24 Apr '18

24 Apr '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Leap 15.0 installations has the option to install a "Transactional server". What is that? And it calls that a "role". - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlrfKi8ACgkQtTMYHG2NR9Vq8QCfVq4rZFShcBlrWBPjGOYLRGKg I88AnjQySN/Pyq0D/BC2brtKf8uhSDDp =Y0Gb -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] su anomaly
by Mark Hounschell 23 Apr '18

23 Apr '18

Previously, in 13.2 and Leap the su command did not need the "-" to get the full --login PATH env variable. I forget when this changed. In Leap-15 it appears to have changed back to the MUCH older way. 13.2: #su # echo $PATH /sbin:/usr/sbin:/usr/local/sbin:/root/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin Leap 42.3: #su # echo $PATH /sbin:/usr/sbin:/usr/local/sbin:/root/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin Leap-15: #su # echo $PATH /sbin:/bin:/usr/sbin:/usr/bin # su - # echo $PATH /sbin:/usr/sbin:/usr/local/sbin:/root/bin:/usr/local/bin:/usr/bin:/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin Just curious if that was intended? Regards Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 14

[opensuse] What is the universal (world wide) understanding behind degaussing harddisks?
by Turritopsis Dohrnii Teo En Ming 23 Apr '18

23 Apr '18

Good evening from Singapore! The foremost question which I want to ask is, what is the universal (world wide) understanding behind degaussing hard drives? I work for No Secrets Agency (NSA) Pte Ltd (fictitious company name used). My sales manager Edward Joseph Snowden (fictitious individual name used) had *promised* our customer Leave Me in the Lurch (S) Pte Ltd (fictitious company name used) that we would "DEGAUSS" their hard disks after the PC replacement and data migration exercise for 15 trillion PCs (fictitious number used). PC = Personal Computer, which includes desktops and laptops Last Friday, I had already reflected to my sales manager Edward Snowden that since we are definitely NOT going to wipe our customer's data by using strong and powerful magnets (physical means), should I send an email to the IT Administrator of our customer Lady Gaga (fictitious individual name used) asking her which data sanitization method (by software means) I should use? My sales manager Edward Snowden had quickly deflected my concerns (that is, wanting to send an email to our customer Lady Gaga asking her which data sanitization method I should use). I had brought up to the sales manager Edward Snowden a number of data wiping methods by software means last Friday. (1) Very very simple 1-pass data wiping, quickest a. Using "sudo dd if=/dev/zero of=/dev/sda", overwriting harddisks from beginning to end with zeroes, where /dev/sda refers to the 500 GB harddisk, not /dev/loop0 and not /dev/sdb which refers to the bootable live operating system on thumb drive b. Using "sudo dd if=/dev/urandom of=/dev/sda", overwriting harddisks from beginning to end with random data, where /dev/sda refers to the 500 GB harddisk, not /dev/loop0 and not /dev/sdb which refers to the bootable live operating system on thumb drive Any bootable Live CD/DVD/flash media could do it. (2) 3-pass U.S. Government/Department of Defense (DoD) standard (DoD 5220.22-M) Certified commercial software required (3) 7-pass U.S. Government/Department of Defense (DoD) standard (DoD 5220.22-M) Certified commercial software required (4) 35-pass Gutmann method, slowest Certified commercial software required All these was last Friday. In the midst of our argument over the cellular network "just now", my sales manager Edward Snowden tried to cover up himself by suddenly and unexpectedly making an excuse that he had told me last Friday I was supposed to wipe user data only, not the operating system! If he had wanted me to wipe user data and retain/keep the Windows operating system, he should simply have told me to Reset the PC (for Windows 10 only) or use a =secure File Shredder=! For Windows 7, you can still wipe user data and preserve the operating system by using the Recovery Partition. On Lenovo desktops, press and hold F11 when Windows 7 is starting and reset to factory defaults. I had advised my sales manager Edward Snowden not to use BIG WORDS like "degaussing the harddisk" and market to the customer using these big words. Any person who sees the word "degauss" would have understood it to mean sanitize *ALL* data on the harddisk straight away and without question. Please refer to Figure 1. Exhibit A below for the "degaussing" instructions communicated to me by my sales manager Edward Snowden. Please click the link below. URI: https://i.imgur.com/bGOMyVs.png Please advise. Thank you very much. Regards, Mr. Turritopsis Dohrnii Teo En Ming Systems and Network Engineer Republic of Singapore 2nd April 2018 Monday 9:35 PM Singapore Time GMT+8 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 8

[opensuse] Please help with enscript and fonts
by don fisher 23 Apr '18

23 Apr '18

I currently use enscript to print my text files. For a long time I have used the font description "-fCourier7". I wished to change this to a larger font, and perhaps bold. But I cannot determine how I discovered the -fCourier7. I have tried listing fonts without success: xfontsel xlsfonts fc-list and looked in the directory /usr/share/fonts. I do not understand how Courier7 gets translated into a filename, and what fonts are available. There is probably some way to view available fonts using LibreOffice Writer, but I do not know how to do it. I also looked under Yast at configuring fonts, but saw no help there. My major questions are, 1. What fonts can I use under enscript and what do I call them? 2. What fonts are on my machine? I am afraid this is probably a stupid question for those of you in the know, but I have spent many hours under Google without success. Thanks Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] Printing emails from Kontact/Kmail
by Lívio Cipriano 23 Apr '18

23 Apr '18

Hi, I'm using openSuse 42.3 with the kmail version supplied and starting today when I want to print a email message the box with the message that kmail is going to open an external browser appears, I click yes for chrome browser and it doesn't render the message to print, just shows the plain html text. But ... if I open the file produced by kmail to the browser (with the format kontact.raSPiE) with firefox, it renders to print. But ... if I alter the name of the file to kontact.raSPiE.html, Chrome renders it to print. I've tried to change the default browser to firefox, but kmail always call Chrome. Any ideas or similar experiences. Regards Lívio Cipriano -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Wicked 30s Timeout on boot of 42.3 - how to fix?
by David C. Rankin 22 Apr '18

22 Apr '18

All, As I sort out the 42.3 install, I'm down my checklist to "Why does wicked create a 30s delay in the boot process?" Basically, after systemd-analyze plot > opensuse_42.3_boot_delay.svg there is no question who/what the culprit is: Apr 18 17:15:24 wizard systemd[1]: Starting wicked managed network interfaces... Apr 18 17:15:54 wizard wicked[1159]: lo up Apr 18 17:15:54 wizard wicked[1159]: wlan0 up Apr 18 17:15:54 wizard wicked[1159]: eth0 setup-in-progress Apr 18 17:15:54 wizard systemd[1]: Started wicked managed network interfaces. >From 17:15:24 - to - 17:15:54, wicked is just sitting there spinning its wheels. Anybody else see something similar? Anybody know how to fix it? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 33

[opensuse] Problem setting up nut/ups [42.3]
by Ralph 22 Apr '18

22 Apr '18

[42.3] First time I'm trying to set up a ups with nut but I'm missing something. It's a Tripp Lite OMNI1500LCDT ups usb (09AE/3016). The driver isn't loading, the debug as follows: :~ # /usr/lib/ups/driver/usbhid-ups -DDD -a myups Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 0.000000 debug level is '3' 0.000601 upsdrv_initups... . . 0.007154 Checking device (09AE/3016) (001/005) 0.009051 - VendorID: 09ae 0.009063 - ProductID: 3016 0.009065 - Manufacturer: unknown 0.009067 - Product: unknown 0.009069 - Serial Number: unknown 0.009070 - Bus: 001 0.009072 - Device release number: 0002 0.009074 Trying to match device 0.009114 Device matches 0.009130 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) 0.009638 Unable to get HID descriptor (Input/output error) 0.009645 HID descriptor length (method 1) -1 0.009661 HID descriptor, method 2: (9 bytes) => 09 21 11 01 00 01 22 68 03 0.009663 HID descriptor length (method 2) 872 0.009665 HID descriptor length 872 0.010345 Unable to get Report descriptor: Input/output error . . 0.031769 No appropriate HID device found 0.031779 No matching HID UPS found "Input/output error"? It's all new hardware. Any ideas? Thanks in advance. Ralph -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] booting into openSUSE (degraded btrfs raid-root)
by Paul Neuwirth 21 Apr '18

21 Apr '18

Hello, web search without X11 is difficult.. Anyone knows how I can boot into openSUSE (Leap 42.3) on a btrfs root filesystem, which got degraded. I wanted to exchange a defective harddisk. I tried booting with rootflags=degraded, and also specifying root partition as "root=/dev/sdb2". despite that, boot doesn't even complete to rescue mode, but is waitin without limit with "A start job is running for dev-whatever.device" what do I miss? thank you Paul -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 10

[opensuse] Grey Streets: a Good Idea?
by Lew Wolfgang 21 Apr '18

21 Apr '18

Hi Folks, Just to stir things up, I'll forward a quote from Los Angeles mayor Eric Garcetti: "Climate change is a fact of life that people in Los Angeles and cities around the world live with every day. It is a grave threat to our health, our environment, and our economy — and it is not debatable or negotiable," I wonder what exactly this "fact of life" is? Not debatable? Sounds like an article of faith, doesn't it? So to fight the evil of climate change, Los Angeles has embarked on a program to paint all their city streets grey. http://www.foxnews.com/us/2018/04/10/los-angeles-painting-city-streets-whit… I'm sure that grey streets will lower their surface temperature a bit, won't it just bounce the sun's heat up into the air again? Only to be trapped and redirected down again by the CO2? Oh, don't worry, it's not too expensive. LA has about 6,500-miles of non-freeway streets, and at $40,000/mile for the coating, will only cost $260,000,000-US. It's a real deal and only needs to be reapplied every seven years. That would mean that you'd have to apply 77.3-miles of coating per month, or assuming a standard work-year, about .5-miles per hour, to keep the coating fresh and functional on all 6,500-miles of streets. Note that the cost doesn't include installation labor, I wonder how many men would be fully employed and at what cost to keep this going? All that being said, it looks like a cool product. The photos on the company's website look nice, I wonder how long it really lasts before flaking off and running down the storm drains, then to pollute the oceans? Regards, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 6

Re: [opensuse] Leap 15 as Vmware Host
by John Andersen 20 Apr '18

20 Apr '18

On 04/20/2018 12:56 PM, James PEARSON wrote: > I also run VB on Leap 15 with no problems what so ever. However rather than using the version > proposed by defaut I installed a more recent version from a different repository. It gets updated > super often. I am impressed. I'd like to know what that "different repository" is. I have licenses for Workstation, and version 12.5, but moving to V14.x is going to cost me $100, and with Leap's old kernel I can't be sure this will actually run. I've had to patch VM modules for a while now, the last kernel you could assure they worked with was 4.4 (LTS), and even getting it to run under Leap 42 was a pain in the ass every time opensuse or vmware pushed any upgrade. -- After all is said and done, more is said than done. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] HP Laser Jet Pro M477fdw works great so far
by don fisher 20 Apr '18

20 Apr '18

This is an amendment to the thread I started on the Canon Color imageCLASS MF733Cdw printer. AS I mentioned previously, I gave up on the Canon finding no viable Opensuse support. The HP Laser Jet Pro M477fdw installed without any problems. I have only tested printing and scanning so far, but both appear to work better than I had expected. The image I have attached is from a scan of an Channel advertisement by Keira Knightley, a favorite. Sorry for the size of the attachment. Image taken with Xsane defaults at a resolution of only 200 dpi. Thanks again for previous help. Don

6 7

[opensuse] email client - very specific requirement
by Istvan Gabor 19 Apr '18

19 Apr '18

Hello: Is there any GUI email client which doesn't allow drag and drop between mailboxes/folders? Background: I have a user who needs to access different IMAP mailboxes at different providers. He's been using seamonkey mail client for >10 years. He is good in reading and writing messages but a little bit clumsy and occasionally drags/drops messages or complete folders from one folder to another one or from one mailbox to another one without even noticing it and messing up things. In my opinion this could only be prevented if draggin/dropping was disabled in the client. Is it possible to disable drag and drop in semaonkey mail? (Even if it requires rebulding). Or is there any GUI email client which doesn't offer drag and drop in its user interface? Thanks in advance, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 7

[opensuse] multiple drm-kmp packages installed - leftovers - trash - remove?
by cagsm 19 Apr '18

19 Apr '18

Hi, leap 42.3 with kernel updates constantly coming in. I kind of remove older kernel-default-xxxx packages when the new kernel proved as a success. there was even some cleanup script or something that removes or purges old kernel packages when there are too many. now I wonder what those drm-kmp-default-xxxxx packages are exactly about, why there are so many and why they not getting cleaned up just the same? do I need them all? do I need them at all? why are they not being cleaned up as well? can I remove all but the highest build latest number? drm-kmp-default-4.9.33_k4.4.79_4-5.2.x86_64 drm-kmp-default-4.9.33_k4.4.120_45-10.2.x86_64 drm-kmp-default-4.9.33_k4.4.126_48-13.3.x86_64 drm-kmp-default-4.9.33_k4.4.76_1-3.2.x86_64 thank you. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] socks5 and ssh in firefox
by gumb 19 Apr '18

19 Apr '18

Though I've been using ssh in a basic way I've never until now looked into how to run something like Firefox on a remote machine residing in another country so as to get around country-specific annoyances. So I found this page: https://calomel.org/firefox_ssh_proxy.html and followed the instructions, went into the Firefox network settings on my local machine and chose SOCKS Host, put in 127.0.0.1 and port 8080, and checked the box for Proxy DNS when using SOCKS v5, but I see that by default, in the box 'No Proxy for' it already has localhost, 127.0.0.1 Wouldn't keeping that there defeat the object? Do I need to remove that? I tried removing it, then opened a terminal and did as suggested: ssh -C2qTnN -D 8080 {remote_machine} I see that by going to http://whatsmyip.org/ the remote IP address is shown and from testing a couple of sites, all seems to work as I need it to, but since I'll be wanting to do this occasionally and switch back and forth in the Firefox network settings, I don't understand if I should always remove that line in 'No Proxy for'? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] chromium or chrome?
by David T-G 19 Apr '18

19 Apr '18

Hi, all -- I've been using Chromium because it's what was available, but I've noticed that it seems to really crush my laptop (details if anyone is interested; maybe I could also be doing something better). I just found that, yes, Linux Chrome does exist, so now I wonder which I'd prefer. Any discussions on the merits of each? I also use FireFox, but I like having two browsers as options, so I hope the answer isn't "they both stink; just use FFox". And I hope the answer also isn't "forget them all and use this other one" ;-) TIA & HAND :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 24

[opensuse] Grub2 netboot: net variables undefined :(
by Peter Suetterlin 18 Apr '18

18 Apr '18

Hi List, I'm using grub2 to set up pxe netboot for UEFI following this blog: https://github.com/openSUSE/kiwi/wiki/Setup-PXE-boot-with-EFI-Using-GRUB2 with some changes (we use http instead of tftp, as the latter is dead slow and the initrd is huge). In principle everything works. However, grub does not automatically set up the network. I have to do this manually using 'net_bootp'. But as the computer has three ports, one of them unconnected, this runs into a timeout that slows things down. So I would like to net_bootp $net_default_interface However, this variable is not set :(( Does anyone have an idea what is missing? Are those variables transfered via some module that I forgot to include, is there a bug in the grub used, or has it to do with hardware? At the moment I'm hardcoding the interface, which is sort-of OK as all affected computers have the same hardware. For reference here's my grub.cfg and the create command line. I'm doing this from a Leap 42.3 system (grub2-2.02-7.1). grub2-mkstandalone -d /usr/lib/grub2/x86_64-efi -O x86_64-efi \ --fonts="unicode" -o bootx64.efi boot/grub/grub.cfg grub.cfg: set timeout=2 menuentry 'Linux diskless' --class os { insmod net insmod efinet insmod tftp insmod http insmod gzio insmod part_gpt insmod efi_gop insmod efi_uga set net_default_server=10.0.2.32 net_bootp efinet1 echo 'Loading Linux ...' linux (http)/boot/linux echo 'Loading initial ramdisk ...' initrd (http)/boot/initrd } -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] jstest Vibration
by Paul Groves 18 Apr '18

18 Apr '18

HI Everyone, I have been using jstest to test game controllers (which I repair). It is a great tool because it displays each button and analog input and I can see if they are working properly. However I am wondering how to test the vibration on these game controllers. The USB adapters are all vibration compatible (and the vibration works on this same PC in the various emulators I use). Surely there is a command or script to turn on the vibration? Does anyone know of such a thing? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Leap-15 kernel related anomaly
by Mark Hounschell 17 Apr '18

17 Apr '18

We have several out of kernel drivers. They build and run fine on the 4.12 kernel that comes on Leap-15. However when we build and run a vanilla kernel from kernel.org and try to build our drivers against it, the build fails. ./include/linux/kernel.h:6:10: fatal error: stdarg.h: No such file or directory #include <stdarg.h> ^~~~~~~~~~ compilation terminated. The vanilla kernel is built and installed like has been done forever via: #make -j# #make modules_install install I figured out what I had to do to get these out of kernel modules to compile. I have to explicitly include "-I/usr/lib64/gcc/x86_64-suse-linux/7/include/". Even the nvidia driver had to have this explicit include added to its Makefile. I have no idea how the kernel handles this but Leap-15 seems to have prohibited it from happening correctly in all but against the 4.12 Leap-15 kernel. I suspect this is not intentional. I also suspect it is a bug somewhere. Never in the history of using opensuse have we had to explicitly make this include in an out of kernel driver. Nobody else has either. Regards Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] KDE/Plasma5 Compositor regression
by John Andersen 17 Apr '18

17 Apr '18

Since fairly recent versions of Plasma 5 (all from Opensuse repositories) going back sometime earlier this year, I've noticed an annoying regression on in the compositor on my hardware. I use to be able to run with all the bling turned on, wobbly windows, transparency, several different effects, fades, zooms, etc - almost all the features offed by KDE. Most of that stuff still works, but now menus, both KDE main menu, as well as application menues get filled with squiggly lines. Attaching an example of a pull-down menu in Tbird. If I then mouse down through the options, each line will become clear as the cursor pointer crosses it. All other compositing effects seem to work the same as they did say last year. KDE previously worked perfectly with all compositing features that your video card was capable of, after many years of effort getting that to work. I thought my video card was failing. Only full solution: I toggled off compositing (Alt-shift 12), and this squiggle fill goes away instantly. (I can also log in with compositing turned off of course.) Equipment: Older ATI RV515 M45 Mobility Radeon X1400. Using the Community drivers. Seen on Leap 42.2 problem started sometime early 2018. Persists in Leap 15 (kernel 4.12.14-6-lp150.8-default) Kde Plasma 5.12.4 Attached small image, lets see if it sneaks through the list server, or if I have to susepaste it, -- After all is said and done, more is said than done.

2 3

[opensuse] Leap 15 Beta - Kudos for packaging Fluxbox (it's what I'm using now on 15)
by David C. Rankin 16 Apr '18

16 Apr '18

Good job devs, I had pulled the 42.3 srpm for fluxbox and built it for Leap 15 beta. Just attempted a zypper dup (--no-recommends) and we now have an openSUSE version of Fluxbox, e.g. Problem: problem with installed package fluxbox-1.3.7-6.6.x86_64 Solution 1: install fluxbox-1.3.7-lp150.1.7.x86_64 (with vendor change) (no vendor) --> openSUSE Solution 2: keep obsolete fluxbox-1.3.7-6.6.x86_64 Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c] (c): 1 Problem: problem with installed package fluxbox-styles-upstream-1.3.7-6.6.noarch Solution 1: install fluxbox-styles-upstream-1.3.7-lp150.1.7.noarch (with vendor change) (no vendor) --> openSUSE Solution 2: keep obsolete fluxbox-styles-upstream-1.3.7-6.6.noarch Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c] (c): 1 That's nice :) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Do I need to do anything special for SSD in Leap 42.3?
by David C. Rankin 16 Apr '18

16 Apr '18

All, I was checking the opensuse articles on SSD and most are 11.2 - 11.4 timeframe, and the latest is non-official. https://en.opensuse.org/SDB:SSD_performance https://sites.google.com/site/easylinuxtipsproject/ssd-in-opensuse https://lizards.opensuse.org/2015/02/06/ssd-configuration-for-opensuse/ All the prior articles discuss putting noatime in fstab, moving tmpfs to ram, disabling browser cache, and setting vm.swappiness=1. They also talk about running fstrim on each boot and putting it in boot.local. What do we do for trim? I've checked systemd trim.service and timer are disabled? Is these customization still needed on Leap 42.3 or does the setup now recognize SSD and make the needed changes? I don't swap (I have one, it's just never used - 8G of RAM). So do we need to enable fstrim service and fstimer? What says the brain-trust? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 26

[opensuse] Silverlight / moonlight / pipelight
by Roger Oberholtzer 16 Apr '18

16 Apr '18

My company has an internal web site that requites sliverlight in the browser. I have not used this site in a while. But I need to now. When it offered to install something for Linux, it sent me to http://www.go-mono.com/moonlight/redirector.html?=4.0.50401.0, and that failed (URL was not in the server). I looked around for openSUSE and saw references to pipelight. But I do not see any packages anymore (except in a user's project - and those are either broken or disabled). I see that there are mono packages. But it is unclear which packages are needed to get silverlight functionality. The mono site suggests installing mono-devel, but there is no such package in OBS. Is there any support for silverlight on Linux anymore? Specifically Leap 42.3. And Mozilla (but that's flexible). -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] driver for Canon Color imageCLASS MF733Cdw driver
by don fisher 16 Apr '18

16 Apr '18

Sorry, somehow I got this message linked to another. Also, my distribution is OpenSUSELeap 4.3 as opposed to 4.2 referenced. I have purchased a Canon Color imageCLASS MF733Cdw laser printer for my OpenSUSELeap 4.2 distribution. 1. Using YAST/hardware/printer/add, I get No connections, try 'Detect More' message. 2. A Canon MF731C/733C UFRII is found at the IP address I assigned. 3. Under 'Find and Assign a Driver' the message no matching driver found is presented. At the Canon site I found a driver for linux linux-UFRII-drv-v350-usen.tar.gz I could find nothing under opensuse search tool that matched. If this is appropriate, how to I install the above tar file? I hope this description is complete enough. Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 31

[opensuse] Leap-15 Beta 187.1
by Mark Hounschell 15 Apr '18

15 Apr '18

I've been testing this for a while now. Looking pretty good. This afternoon it says I have 1244 packages to upgrade. Do I dare? Thanks Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

15 53

[opensuse] experimental packages
by Dave Howorth 13 Apr '18

13 Apr '18

I'm considering installing mosquitto on my 42.3 system. I'd previously installed it on earlier openSUSE versions from a home repository. So I went to https://software.opensuse.org/package/mosquitto and I see that there are now official releases for Tumbleweed and 15.0, but not for 42.3 or older systems. In addition to various home repositories (listed under community packages), I see there is also a package marked 'experimental'. What exactly is an 'experimental' package? Is it better than a home package or more dangerous? There's no tooltip or other explanation of the meaning on that web page, so I clicked on Documentation which took me to https://doc.opensuse.org/ and then I typed 'experimental package' into the search box and it said 'Unauthorized access to internal API. Please refer to https://support.google.com/customsearch/answer/4542055' which isn't very useful. So I searched for 'opensuse experimental packages' on google, but it shows me lots of hits for particular packages that are 'experimental' but I don't see any definition of what that means. Cheers, Dave PS I did the searches without quotes. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] the kernel version
by George from the tribe 13 Apr '18

13 Apr '18

Ok, I am confused. The last thread talked about the kernel being used in Leap 15 that is coming out, as being kernel 4.12. Then this website that was linked on the thread: http://news.softpedia.com/news/linux-kernel-4-12-reached-end-of-life-users-… talks about how kernel 4.12 has reached end of life and everyone should move to 4.13. So I looked on my desktop running 42.3 with all the latest updates, and this is my kernel: > uname -r 4.4.120-45-default Then I looked on my laptop running 42.3 with all the latest updates as of a week ago, which uses the kernel:stable repository, and this is the kernel it is using: > uname -r 4.15.15-1.g4904fc3-default So if 4.12 has reached end of life, then 4.4 (which is what is available in the distribution repos for 42.3) must be really old. But 4.15, which is available from the kernel:stable repository, is far out in the future and not yet being really developed. My conclusions there must be wrong, but why? Is there something to the way they number the kernels that I am missing here? Does openSUSE have a different numbering scheme than the rest of the linux world? -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 42.3 | Gnome 3.20 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 42.3 | Gnome 3.20 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 21

[opensuse] Leap-15 Beta 187.1 - Wohoo! GCC 7.3!
by David C. Rankin 13 Apr '18

13 Apr '18

Now we are talking, A shiny new custom install of Leap-15 Beta with Minimal X, via IceWM and Low and Behold GCC 7.3! # gpasswd -a david wheel # visudo ... ## Same thing without a password %wheel ALL=(ALL) NOPASSWD: ALL # vi /etc/pam.d/su ...(see 2 comment lines and 2 additions below) #%PAM-1.0 auth sufficient pam_rootok.so # Uncomment the following line to implicitly trust users in the "wheel" group. auth sufficient pam_wheel.so trust use_uid # Uncomment the following line to require a user to be in the "wheel" group. auth required pam_wheel.so use_uid auth include common-auth account sufficient pam_rootok.so account include common-account password include common-password session include common-session session optional pam_xauth.so # exit $ su # ... (bingo - works fine) # hostname myhostname.mydomain.tld # echo myhostname > /etc/hostname # systemctl reboot ... $ done :) - painlessly, now to finish the KDE3 build... -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] leap15 build 187.1 - zypper up vs zypper dup
by Per Jessen 13 Apr '18

13 Apr '18

Just in case somebody should not be not yet be convinced - this is a diff between the output of "zypper dup" and "zypper up": http://files.jessen.ch/office38-zypper-dup-up.diff 'office38' is a test desktop machine. -- Per Jessen, Zürich (11.9°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Question re security updates (shibboleth-sp)
by Josef Fortier 13 Apr '18

13 Apr '18

Wondering how security updates are handled at the tail of an active cycle. The immediate concern, shibboleth-sp has a security issue in the current package. Looking at software.opensuse.com (hoping there'd be some updated package for opensuse there) I see that Tumbleweed and SLES variants, as well as the (beta) of 15 have updates. More surprisingly openSUSE 12.3 has an update (this seems to be the work of the Shibboleth people). But no package update for Leap. I'd guess this is because 15 is due out in May, but this seems a long time to me. Is there a policy that governs this? Thansk -- __________________________________________________________________________ Josef Fortier Systems Administrator fortier(a)augsburg.edu Phone: 612-330-1479 __________________________________________________________________________ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Bug fixes in opensuse are somewhat of a bad joke nowadays...
by David C. Rankin 13 Apr '18

13 Apr '18

What Removed Added ----------+----------+---------- status NEW RESOLVED ----------+----------+---------- Resolution --- WONTFIX ----------+----------+---------- Comment # 8 on bug 924818 from Tomáš Chvátal This version of openSUSE changed to end-of-life (EOL [1]) status. As such it is no longer maintained, which means that it will not receive any further security or bug fix updates. As a result we are closing this bug. If you can reproduce this bug against a currently maintained version of openSUSE, or consider the bug still valid, please feel free to reopen this bug against that version, or open a new ticket. Thank you for reporting this bug and we are sorry it could not be fixed during the lifetime of the release. [1] https://en.opensuse.org/Lifetime -------------- Thanks -- that really helped. -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 6

[opensuse] leap 15
by jdd＠dodin.org 12 Apr '18

12 Apr '18

hello, is this now the right place to ask about leap 15? I don't want to add factory to my already too large subscription list :-( thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Late to Game, but finally moved to 42.3, clean install a bit awkward, but completes fine.
by David C. Rankin 11 Apr '18

11 Apr '18

All, I finally moved my laptop to 42.3 (even though I booted 42.2 here, because I haven't finished the hours of config still to come...), but nonetheless I have a blazing Leap_42.3 install with a fresh KDE3 desktop, all on 500G of Samsung SSD -- and yes -- the speed difference (especially compiling) is very noticeable. All in all the Leap 42.3 install was.. cumbersome, frustrating, took a bit of coaxing to install what I wanted installed and not what I didn't want, but it worked just fine. The cumbersome part was the inability to add repos prior to the install (or at any point during). This was compounded by the truly insane default partition scheme suggested using btrfs for a user-laptop?? We have dumbed-down the desktop to the point of file managers that have a shadow of the capabilities they provided a decade ago so they are "easier for the new user", but now we somehow expect the newbie to master an enterprise level filesystem notorious for snapshotting all usable space into oblivion? I guess the really smart people see the logic in that, but that logic just escapes us lesser mortals... The good parts of the install, after nuking the btrfs suggestion and the secondary non-native XFS suggestion and dropping back to the wasteful old ext4 that has never lost a file for me in a decade, the remainder went great. Both wired and wireless Intel 82579LM Gigabit Network Connection (wired) and Intel Centrino Ultimate-N 6300 (wireless) -- so kudos to that. A bit more of the cumbersome was completing the entire install in text mode with minimal yast modules present as the frustrating part of the install provided no KDE3 pattern, despite providing every other minor semi-maintained option of enlightenment, lxde, mode, cinnamon, icewm, windowmaker, etc.. You guys have a fantastic option in KDE3 that installs flawlessly, there is no reason not to have a patter for it for install. (enlightenment but KDE?) If you go this route, at least install the X-server and icewm so you will get the full yast. Even installing xterm, firefox, LibreOffice, etc.. still did not pick up the X-server dependency leading to needing to complete the install via out old buddy the yast2 interface (which is quite fine). The other slightly frustrating part (which has been there since at least 7.0) is clicking of a repo and.... waiting while the package info is loaded (and reloaded each time you move up/down the repo list) That and the 'tab-order' of all the text mode controls obviously haven't been revisited since the 10.0 days despite the letters changing. (tabbing reminds me of a pinball machine -- with no hope of shift-tab actually backing up to the previous pane) All-in-all other than the btrfs, awkward desktop pattern selection, and no X-server dependency -- there is not much to complain about. There was no fuss on the network-install connection or package retrieval, it just worked, there are some dependency issue when selecting packages without packman and/or videolan configured. The last surprise was the missing convenience directives in /etc/pam.d/su that no longer provided an easy uncomment to allow users of 'wheel' to su without a password, e.g. # Uncomment the following line to implicitly trust users in the "wheel" group. auth sufficient pam_wheel.so trust use_uid # Uncomment the following line to require a user to be in the "wheel" group. auth required pam_wheel.so use_uid ... the removal may be a security enhancement, but thankfully I have a ssh client on my phone that I could jump on an older install and get the details (heaven know I didn't recall the specifics) Maybe next time I'll take the less painful route of upgrade, but I've done a clean install of every release (other than those I skipped when we were on the 6-month rapid-fire rabbit-pellet release cycles) back in the good ole days (when that steel-trap type logic reared it head in the name of progress) So now I sit with the shiny new ssd as sda and this old platter as sdb in my laptop, just wait to finish the bulk of the install by mounting the other under /mnt and rolling all the needed files and configs back over. (and tweaking the users/groups, etc.) That will be as a time-allows project over the next few days. So good job again. Leap 42.3 installs just fine. Other than the somewhat ironic logic of making things easier for new users while feeding them btrfs there were really no hiccups in the network install. (that speaks well, I don't think I've had a serious install problem in 15 years, sure there are things that could be made better, but the installer still mows the grass) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 43

[opensuse] Its NOT supported
by John Andersen 11 Apr '18

11 Apr '18

But it worked for me. I upgraded from 42.2 directly to Leap 15 without installing 42.3. (Took an extra backup before I started). Everything worked fine. System boots fine, and seems as responsive as ever. (Its an SSD system). There were some dependency conflicts to resolve and I carefully selected the option to switch back to Opensuse packages for almost all the multimedia things I had installed from Packman. (as I've been assured here on this list that Opensuse has ceased sending crippled packages and all those issues are handled like every other distro - it just works). This may have been an error, as I can't get any video to play. Music does play. I'll hunt down this problem later. I half expected this to be the case anyway). The upgrade loaded a boatload of texlive stuff that I did not previously have, and have no use for, but I can clean that up later. -- After all is said and done, more is said than done. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 45

[opensuse] how to install viber7 on oS or TW
by Oszkó Albert 11 Apr '18

11 Apr '18

Hi all, I tried to install viber the other day on my laptops, but I met some missing dependencies - like libcrypto.so libssl.so and libpng.so named file. There are files with similar names in /usr/lib64. I tried to soft link them to the names that are expected, but without success. So how to proceed? Thanks, Albert

4 5

[opensuse] Transferring LVM
by suse＠a-domani.nl 11 Apr '18

11 Apr '18

Hi, Coming week, I'll try to transfer to a more recent virtualisation server and install it with more up-to-date platform (12.3 => 42.3) My XEN-clients (SLES) are all stored in LVM's What would be the most efficiant way to transfer them from one piece of iron to another? After I create new LVM's, can I 'dd' them over the network? from node1:/dev/data/minoss-servers ==> node2:/dev/data/minoss-servers Hans -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] Doevecot Imap Really Slow with Recent Updates
by Charles Philip Chan 10 Apr '18

10 Apr '18

Hello all: There seem to be a permission problem with Dovecot in recent updates that leads to really slow operations. This is what I see in the journal log: ,---- | Apr 10 01:19:11 karnak dovecot[2406]: master: Fatal: execv(/usr/lib/dovecot/stats) failed: Permission denied | Apr 10 01:19:11 karnak dovecot[1925]: master: Error: service(stats): command startup failed, throttling for 60 secs | Apr 10 01:19:11 karnak dovecot[2406]: stats: Fatal: master: service(stats): child 14755 returned error 84 (exec() failed) `---- The permissions for stat seems to be OK: ,---- | -rwxr-xr-x 1 root root 27240 Mar 29 07:24 /usr/lib/dovecot/stats `---- Have anyone else experienced this and is there a quick fix? Thanks. Charles

3 3

[opensuse] zypper addrepo - http:// vs. https://
by Per Jessen 10 Apr '18

10 Apr '18

I'm sure someone has a quick explanation: a) zypper addrepo 'https://download.opensuse.org/repositories/Virtualization:containers/openSU…' This fails: Download (curl) error for 'https://download.opensuse.org/repositories/Virtualization:containers/openSU…': Error code: Bad URL Error message: Protocol http not supported or disabled in libcurl b) zypper addrepo 'https://download.opensuse.org/repositories/Virtualization:/containers/openS…' Works fine. (notice the extra slash between 'Virtualization:' and 'container'. c) zypper addrepo 'http://download.opensuse.org/repositories/Virtualization:containers/openSUS…' d) zypper addrepo 'http://download.opensuse.org/repositories/Virtualization:/containers/openSU…' Both work fine. -- Per Jessen, Zürich (9.1°C) http://www.cloudsuisse.com/ - your owncloud, hosted in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

[opensuse] File/folder permissions that does not make sense to me!
by Marc Chamberlin 09 Apr '18

09 Apr '18

I wonder if some kind guru could explain this logic to me or direct me to an appropriate users group... I have a mixed SOHO network in my home with both Linux and Windoz systems running on it. I use autofs to automount Windows folders on my Linux systems and for the most part I don't have any issues. But one thing that has been perplexing me is why I could not copy files from say my Linux laptop to my Windows system at the C:/Users/marc/Documents folder. (I automount C: using autofs under /mnt/samba/windowscomputername/C so I can have access to the entire drive from my laptop) What really perplexed me was that I could copy files to any subfolder under C:/Users/marc/Documents such as to C:/Users/marc/Documents/tmp/newfile. My instincts told me there had to be some sort of permission problem that I had to resolve on the Windows system. So I tried everything I could think of to relax the permissions so that anyone and everyone could access the Documents folder, but to no joy. It finally occurred to me to try and take a look at it from the Linux side, so using Dolphin I examined the permissions of the Documents folder and sure enough Dolphin was reporting that I only had read permissions on the Documents folder. So on a lark I decided to try and change the permissions via Dolphin (chmod also behaved the same way) to give me read/write permissions and I will be damned if that didn't work! But I will be twitched if I can understand why in the world that worked and why I have to give myself permission to write to the Documents folder on a Windows system, from/on the Linux system side also! Shouldn't file permissions and access be strictly governed by the system that owns the files and folders? Why does a Linux system user have to give himself/herself permissions in order to write to files on a different system? This is effectively saying that in order to write to a file system on another computer I have to give myself permission to do so on BOTH systems! In other words, it wasn't Windows that was blocking me from writing to the Windows file system from my Linux laptop, it apparently was Linux itself! Is there some weird magic about Documents folders on Windows systems? Doesn't make any sense to me... Just to be certain, I took a look at the folder permissions, under Windows, both before and after making the permission change on the Linux system, and I could not see any changes so this appears to be strictly a Linux side permissions issue... Marc.... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 12

[opensuse] Please show your output from "ls -l /bin/vim"
by ken 09 Apr '18

09 Apr '18

What boffoness is this!? $ whereis -b vi vim vi: /usr/bin/vi /bin/vi vim: /usr/bin/vim /bin/vim /usr/share/vim $ ll /usr/bin/vim /bin/vim /usr/bin/vi /bin/vi lrwxrwxrwx 1 root root 3 Mar 24 02:10 /bin/vi -> vim -rw-r--r-- 1 root root 2363952 Jul 2 2017 /bin/vim lrwxrwxrwx 1 root root 8 Mar 24 02:10 /usr/bin/vi -> /bin/vim lrwxrwxrwx 1 root root 8 Mar 24 02:10 /usr/bin/vim -> /bin/vim In short, everything is a symlink to /bin/vim, but /bin/vim doesn't have execute permissions. Why/How can this be? Does anyone else have this utter strangeness? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 14

[opensuse] adding a static route
by ken 09 Apr '18

09 Apr '18

My recent install figured out the basic networking: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0 But I also need a static route to another (local) network. I can do this (old school) with: route add -net 10.10.0.0/16 gw 192.168.0.98 eth0 and then I have: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 10.10.0.0 192.168.0.98 255.255.0.0 UG 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0 But how do I do this in 24.3? I searched duck-duck, tried what the links there suggested... none of that worked. Also went into yast -> Network Services -> Network Settings, turned on Wicked, went to Routes, typed in the data, but was given a long error message: it didn't like my data. Is there a config file I can enter data into instead? (Screenshot of error at http://paste.opensuse.org/51414648) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] sudo /etc/sudoers.d/* files being ignored?
by Paul Neuwirth 08 Apr '18

08 Apr '18

Hi, the following works on all (Leap 42.3 and Leap 15.1) installations, but not on a Leap 42.2 (don't know if version causing the problem). sudo doesn't seem to respect files in /etc/sudoers.d/ # ssh -t sysupdateuser(a)422machine.swabian.net 'sudo zypper ref' We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. root's password: on all other machines, I do not get prompted for password. do I miss anything? thank you for any tip Regards, Paul Here's the configuration, which is the same on all servers: # grep "^\s*[^#\;].*" /etc/sudoers Defaults always_set_home Defaults env_reset Defaults env_keep = "LANG LC_ADDRESS LC_CTYPE LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_ALL LANGUAGE LINGUAS XDG_SESSION_COOKIE" Defaults !insults Defaults targetpw # ask for the password of the target user i.e. root ALL ALL=(ALL) ALL # WARNING! Only use this together with 'Defaults targetpw'! root ALL=(ALL) ALL ([...] other entries not matching sysupdateuser) # tail -n 3 /etc/sudoers ## Read drop-in files from /etc/sudoers.d ### (the '#' here does not indicate a comment) #includedir /etc/sudoers.d # cat /etc/sudoers.d/sysupdateuser sysupdateuser ALL = (root) NOPASSWD: /usr/bin/zypper ref -n, /usr/bin/zypper ref, /usr/bin/zypper -n --non-interactive-include-reboot-patches, \ /usr/bin/zypper up -n, /usr/bin/zypper up, /usr/bin/zypper -n --non-interactive-include-reboot-patches, \ /usr/bin/zypper patch --with-optional -n, /usr/bin/zypper patch --with-optional, /usr/bin/zypper --with-optional -n --non-interactive-include-reboot-patches, \ /usr/bin/zypper up -n --with-interactive, /usr/bin/zypper up -n --with-interactive --non-interactive-include-reboot-patches, \ /usr/bin/zypper patch --with-optional -n --with-interactive, /usr/bin/zypper patch --with-optional -n --with-interactive --non-interactive-include-reboot-patches # ls -la /etc/sudoers /etc/sudoers.d/ -r--r----- 1 root root 3688 Apr 7 20:20 /etc/sudoers /etc/sudoers.d/: total 44 drwxr-x--- 2 root root 4096 Apr 7 20:22 . drwxr-xr-x 259 root root 24576 Apr 7 20:20 .. -r--r----- 1 root root 45 Oct 29 2016 check_smart_attributes -r--r----- 1 root root 146 Oct 29 2016 monitoring-plugins-smart -r--r----- 1 root root 837 Mar 22 10:42 sysupdateuser -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Understanding Linux filesystems: ext4 and beyond (link to article)
by Carlos E. R. 07 Apr '18

07 Apr '18

*Understanding Linux filesystems: ext4 and beyond* Learn the history of ext4, including what's different from ext3 and the other filesystems that came before it. <https://opensource.com/article/18/4/ext4-filesystem> «The majority of modern Linux distributions default to the ext4 filesystem, just as previous Linux distributions defaulted to ext3, ext2, and—if you go back far enough—ext.» «If you're new to Linux—or to filesystems—you might wonder what ext4 brings to the table that ext3 didn't. You might also wonder whether ext4 is still in active development at all, given the flurries of news coverage of alternate filesystems such as btrfs, xfs, and zfs.» «We can't cover everything about filesystems in a single article, but we'll try to bring you up to speed on the history of Linux's default filesystem, where it stands, and what to look forward to.» (continues on the link) -- Cheers/Saludos Carlos E. R. (testing openSUSE Leap 15.0, at Minas-Anor) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Upgrade Leap 42.3 -> 15.0 Disaster
by Andrei Verovski 07 Apr '18

07 Apr '18

Hi, I have just upgraded 2 pcs with Leap 42.3 to 15.0, and both have problem with networking. 1) PC #1, Linux workstation, networking broke (single static IP ethernet), redefined in yast, now working. Teamviewer 12 stopped working, hanging for forever on launching GUI. Reinstall don’t help. 2) PC #2, Linux KVM host with 10 ethernet interfaces and 2 VyOS router QEMU instances. 1 static local IP 192.168.0.172, for management. 7 ethernet interfaces enslaved for bridges, used by VyOS routers. eth0 - 192.168.0.172 Bridges: eth2 - brltc1, eth3 - brbtc1, eth4 - brdmz, eth5 - brint eth6 - br_eth6, eth7 - br_eth7, eth8 - br_eth8 eth1, eth9 - unused In Yast (screenshot can’t be attached for mailing), looks like everything is OK, yet it is not. Networking messed up completely. Some interfaces, incl. eth0, are simply lost by Wicked. Both firewalld and SuSEfirewalll rpms are removed from the system. BTW, I assume SuSEfirewalll should be marked as conflicting with firewalld. Is there any way to fix this, or I should wipe out entire OS and install back to 42.03 ? Thanks in advance for any help. Andrei ----------------------- rthost:/home/andrei # rcnetwork status ● wicked.service - wicked managed network interfaces Loaded: loaded (/usr/lib/systemd/system/wicked.service; enabled; vendor preset: disabled) Active: active (exited) since Fri 2018-04-06 13:28:10 EEST; 3min 1s ago Process: 2146 ExecReload=/usr/sbin/wicked --systemd ifreload all (code=exited, status=0/SUCCESS) Main PID: 725 (code=exited, status=0/SUCCESS) Apr 06 13:28:10 rthost.local wicked[725]: eth3 enslaved Apr 06 13:28:10 rthost.local wicked[725]: eth6 enslaved Apr 06 13:28:10 rthost.local wicked[725]: eth9 setup-in-progress Apr 06 13:28:10 rthost.local wicked[725]: br_eth8 up Apr 06 13:28:10 rthost.local wicked[725]: brbtc2 up Apr 06 13:28:10 rthost.local wicked[725]: br_eth7 up Apr 06 13:28:10 rthost.local systemd[1]: Started wicked managed network interfaces. Apr 06 13:29:48 rthost.local systemd[1]: Reloading wicked managed network interfaces. Apr 06 13:30:18 rthost.local wicked[2146]: eth1 setup-in-progress Apr 06 13:30:18 rthost.local systemd[1]: Reloaded wicked managed network interfaces. ----------------------- ping 192.168.0.1 connect: Network is unreachable ——————————— Brought up eth0 rthost:/home/andrei # ifup eth0 eth0 up rthost:/home/andrei # ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.639 ms 64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.626 ms -------------------------- rthost:/home/andrei # rcnetwork status ● wicked.service - wicked managed network interfaces Loaded: loaded (/usr/lib/systemd/system/wicked.service; enabled; vendor preset: disabled) Active: active (exited) since Fri 2018-04-06 13:28:10 EEST; 3min 48s ago Process: 2146 ExecReload=/usr/sbin/wicked --systemd ifreload all (code=exited, status=0/SUCCESS) Main PID: 725 (code=exited, status=0/SUCCESS) Apr 06 13:28:10 rthost.local wicked[725]: eth3 enslaved Apr 06 13:28:10 rthost.local wicked[725]: eth6 enslaved Apr 06 13:28:10 rthost.local wicked[725]: eth9 setup-in-progress Apr 06 13:28:10 rthost.local wicked[725]: br_eth8 up Apr 06 13:28:10 rthost.local wicked[725]: brbtc2 up Apr 06 13:28:10 rthost.local wicked[725]: br_eth7 up Apr 06 13:28:10 rthost.local systemd[1]: Started wicked managed network interfaces. Apr 06 13:29:48 rthost.local systemd[1]: Reloading wicked managed network interfaces. Apr 06 13:30:18 rthost.local wicked[2146]: eth1 setup-in-progress Apr 06 13:30:18 rthost.local systemd[1]: Reloaded wicked managed network interfaces. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Command line webpin gives 404 -- it is just dead for 42.3?
by David C. Rankin 06 Apr '18

06 Apr '18

Title says it all, Installed webpin, hacked the distro.version to add 42.3 (like I've had to do since 11.0), and while it was working great on 42.2, I get a 404 response when I run it from 42.3. So is it just dead or are we having index issue? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 9

[opensuse] Where is cinelerra_cv for Leap 42.3?
by David C. Rankin 06 Apr '18

06 Apr '18

All, Where is cinelerra_cv for 42.3? I have 18 years of video done in cinelerra and it has always been available for opensuse via packman. I cannot find it? On leap 42.2 it is from: /var/cache/zypp/packages/packman/Multimedia/x86_64/cinelerra-cv-2.3.0-2.4.x86_64.rpm Where is it available for 42.3? ... This is a mayday moment.. -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 10

[opensuse] prime-select: unable to query GPU information
by Daniel Bauer 05 Apr '18

05 Apr '18

Hi, I just upgraded my asus laptop with intel/nvidia graphics from 42.1 to 42.3, all went well so far. But when entering prime-select nvidia I get: ERROR unable to query GPU information The script runs anyway, I guess, because when I reboot at some point the screen with the boot messages begins to flicker heavily (I could not read the last message...). I had to restart and boot to runlevel 3, then entered "prime-sectect intel" and now I can boot normally - but of course only using the intel card. I don't know which information you need to help me: please ask and I'll try to provide it. Thanks for your help! Daniel -- Daniel Bauer photographer Basel Barcelona https://www.patreon.com/danielbauer http://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 42

[opensuse] 15 Stable enough yet?
by John Andersen 04 Apr '18

04 Apr '18

I'm at a break-point in my need for my Opensuse machine, such that I can tolerate some disruption. I was thinking I might try Leap 15 on it. I know Carlos recently posted that he had success with it. Is it ready for routine use with most things working? (mostly I just cut code on that box, adequately backed up). -- _____________________________________ ---This space for rent--- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] /etc/default/grub SUSE_BTRFS_SNAPSHOT_BOOTING="true" ? I have ext4 only?
by David C. Rankin 04 Apr '18

04 Apr '18

All, Going through grub config, I run across the following: SUSE_BTRFS_SNAPSHOT_BOOTING="true" Huh? I installed on ext4 only -- what's this doing in the config? I presume it will simply be ignored, but shouldn't this get commented when there is no btrfs installed? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] 42.3 - Wow, what a desktop :)
by David C. Rankin 04 Apr '18

04 Apr '18

All, Config moved over, started right up, beautiful desktop: http://paste.opensuse.org/16603850 Now all I have to do is rebuild freetype2 to smooth the fonts to perfection and we are good to go. (this message sent from my shiny new 42.3 :) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] Which distros for ReiserFS?
by Stevens 03 Apr '18

03 Apr '18

On the odd chance that I was ignored for possibly hijacking a thread, I shall start a new one but copy and paste my comments in hope of an answer: (re: Killing ReiserFS) I have been following this thread with some interest because of having been running ReiserFS since before he turned homicidal. I have had zero, count that ZERO, problems in all that time so I read with some dismay the effort to actively kill its usage in this whatever-you-call-it distro. I think that the more relevant question to ask is not "can we keep this file system around, pretty please" but "what distros are allowing its use by not actively trying to kill it"? I have used opensuse since before Mandrake went away, which has been a while and, although I don't really want to change distros, I am not married to suse (or leap, or whatever). I feel that what we have here with opensuse/leap is an example of the classic "swing" cartoon which shows the stages of project development from sales, engineering, installation and what the customer actually wanted. My need is not as complex as some and for that ReiserFS works quite well. So, my question remains, "If not suse/leap, then who"? Hopefully someone will know what distros allow the freedom to use whichever FS one wishes without running afoul of the FS nazis. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

22 99

[opensuse] Re: [opensuse-factory] Should eth disconnect automatically when WiFi goes up? (Leap 15.0 Beta)
by James Knott 03 Apr '18

03 Apr '18

On 04/03/2018 09:45 AM, Carlos E. R. wrote: > But it is the same network. > > route: command not found. Yes, I can install it, I know. Just curious > that it wasn't by default. > > "ip route" shows that the metrics are different (100 and 600). Either way works. I may have installed route some time ago. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] oS mailing lists: email header to message in mailing list archive?
by Bernhard Voelker 03 Apr '18

03 Apr '18

Hi *, would it be possible to add the ML archive link of the current message to the email headers? Sometimes I need to refer to a certain message of a oS mailing list in a post somewhere else. For this, I start with looking at the enclosed email headers to find the link to the archive, e.g.: List-Post: <mailto:opensuse-packaging@opensuse.org> List-Help: <mailto:opensuse-packaging+help@opensuse.org> List-Subscribe: <mailto:opensuse-packaging+subscribe@opensuse.org> List-Unsubscribe: <mailto:opensuse-packaging+unsubscribe@opensuse.org> List-Owner: <mailto:opensuse-packaging+owner@opensuse.org> List-Archive: <http://lists.opensuse.org/opensuse-packaging/> ... then browse that "List-Archive" link to find that same message, and finally get the link to post, e.g. https://lists.opensuse.org/opensuse-packaging/2018-03/msg00017.html Wouldn't it be nice to have this already as an additional email header, e.g. in the above case: List-Archive-Post: <https://lists.opensuse.org/opensuse-packaging/2018-03/msg00017.html> ? Not sure if this is easily possible, or if there is a standard for such a ML header already ... Thanks & have a nice day, Berny -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 14

[opensuse] Where to get Lightzone for leap 42.3?
by Anton Aylward 01 Apr '18

01 Apr '18

Or is it even still supported? -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] bumblebeed oops
by Markus Koßmann 31 Mar '18

31 Mar '18

Anyone seen this before: 2018-03-31T06:11:24.251115+02:00 linux-86i0 kernel: [ 9.778199] ------------[ cut here ]------------ 2018-03-31T06:11:24.251116+02:00 linux-86i0 kernel: [ 9.778206] WARNING: CPU: 1 PID: 2105 at ../drivers/pci/pci.c:1596 pci_disable_device+0x90/0xa0() 2018-03-31T06:11:24.251117+02:00 linux-86i0 kernel: [ 9.778208] pci 0000:02:00.0: disabling already-disabled device 2018-03-31T06:11:24.251118+02:00 linux-86i0 kernel: [ 9.778208] Modules linked in: vmnet(O) ppdev parport_pc parport fuse vmw_vsock_vmci_transport vsock vmw_vmci vmmon(O) msr bnep btrfs xor raid6_pq arc4 nls_iso8859_1 nls_cp437 vfat intel_rapl fat x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_hdmi kvm_intel snd_hda_codec_realtek snd_hda_codec_generic kvm irqbypass crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec snd_hda_core crc32c_intel snd_hwdep ghash_clmulni_intel snd_pcm pn544_mei drbg snd_seq uvcvideo mei_phy iwlmvm videobuf2_vmalloc videobuf2_memops snd_seq_device pn544 mac80211 ansi_cprng videobuf2_v4l2 hci snd_timer videobuf2_core aesni_intel btusb btrtl v4l2_common btbcm iTCO_wdt aes_x86_64 dell_wmi videodev nfc snd iTCO_vendor_support sparse_keymap lrw dell_laptop gf128mul btintel glue_helper rtsx_pci_ms bluetooth iwlwifi dcdbas ablk_helper ipmi_msghandler ie31200_edac cryptd memstick soundcore cfg80211 acpi_als joydev edac_core pcspkr i2c_i801 lpc_ich kfifo_buf mei_me shpchp mei industrialio fjes fan thermal int3403_thermal int3402_thermal int3400_thermal battery dell_rbtn dell_smo8800 ac int340x_thermal_zone acpi_thermal_rel rfkill processor ext4 crc16 jbd2 mbcache sd_mod hid_multitouch usbhid sg dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua ahci rtsx_pci_sdmmc libahci mmc_core i915(O) i2c_algo_bit libata rtsx_pci mxm_wmi drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops xhci_pci serio_raw scsi_mod mfd_core ehci_pci xhci_hcd ehci_hcd usbcore usb_common drm(O) wmi video button dm_mirror dm_region_hash dm_log dm_mod bbswitch(O) efivarfs autofs4 [last unloaded: nvidia] 2018-03-31T06:11:24.251119+02:00 linux-86i0 kernel: [ 9.778263] CPU: 1 PID: 2105 Comm: bumblebeed Tainted: P O 4.4.120-45-default #1 2018-03-31T06:11:24.251120+02:00 linux-86i0 kernel: [ 9.778264] Hardware name: Dell Inc. XPS 15 9530/XPS 15 9530, BIOS A08 01/08/2015 2018-03-31T06:11:24.251121+02:00 linux-86i0 kernel: [ 9.778266] 0000000000000000 ffffffff813438a7 ffff88041d86fd98 ffffffff81a532f5 2018-03-31T06:11:24.251121+02:00 linux-86i0 kernel: [ 9.778269] ffffffff810844e1 ffff88041f123000 ffff88041d86fde8 00007fc07cd8e000 2018-03-31T06:11:24.251122+02:00 linux-86i0 kernel: [ 9.778271] ffff88041d86ff28 0000000000000028 ffffffff8108455c ffffffff81a6dc88 2018-03-31T06:11:24.251123+02:00 linux-86i0 kernel: [ 9.778274] Call Trace: 2018-03-31T06:11:24.251124+02:00 linux-86i0 kernel: [ 9.778284] [<ffffffff8101b0f9>] dump_trace+0x59/0x350 2018-03-31T06:11:24.251125+02:00 linux-86i0 kernel: [ 9.778288] [<ffffffff8101b4ea>] show_stack_log_lvl+0xfa/0x180 2018-03-31T06:11:24.251125+02:00 linux-86i0 kernel: [ 9.778291] [<ffffffff8101c2b1>] show_stack+0x21/0x40 2018-03-31T06:11:24.251126+02:00 linux-86i0 kernel: [ 9.778295] [<ffffffff813438a7>] dump_stack+0x5c/0x85 2018-03-31T06:11:24.251127+02:00 linux-86i0 kernel: [ 9.778301] [<ffffffff810844e1>] warn_slowpath_common+0x81/0xb0 2018-03-31T06:11:24.251128+02:00 linux-86i0 kernel: [ 9.778305] [<ffffffff8108455c>] warn_slowpath_fmt+0x4c/0x50 2018-03-31T06:11:24.251128+02:00 linux-86i0 kernel: [ 9.778309] [<ffffffff8138d960>] pci_disable_device+0x90/0xa0 2018-03-31T06:11:24.251129+02:00 linux-86i0 kernel: [ 9.778314] [<ffffffffa000c1cd>] bbswitch_off+0x8d/0x240 [bbswitch] 2018-03-31T06:11:24.251143+02:00 linux-86i0 kernel: [ 9.778319] [<ffffffffa000c5ae>] bbswitch_proc_write+0xae/0xbc [bbswitch] 2018-03-31T06:11:24.251146+02:00 linux-86i0 kernel: [ 9.778324] [<ffffffff81281bcc>] proc_reg_write+0x3c/0x70 2018-03-31T06:11:24.251147+02:00 linux-86i0 kernel: [ 9.778329] [<ffffffff81215ff6>] __vfs_write+0x26/0x140 2018-03-31T06:11:24.251148+02:00 linux-86i0 kernel: [ 9.778332] [<ffffffff81216d7f>] vfs_write+0xaf/0x1d0 2018-03-31T06:11:24.251149+02:00 linux-86i0 kernel: [ 9.778336] [<ffffffff81217e22>] SyS_write+0x42/0xa0 2018-03-31T06:11:24.251150+02:00 linux-86i0 kernel: [ 9.778342] [<ffffffff81640809>] entry_SYSCALL_64_fastpath+0x22/0xba 2018-03-31T06:11:24.253122+02:00 linux-86i0 systemd[1]: Started Network Manager Script Dispatcher Service. 2018-03-31T06:11:24.253330+02:00 linux-86i0 dbus[1340]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 2018-03-31T06:11:24.255077+02:00 linux-86i0 kernel: [ 9.781274] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x22/0xba 2018-03-31T06:11:24.255083+02:00 linux-86i0 kernel: [ 9.781275] 2018-03-31T06:11:24.255083+02:00 linux-86i0 kernel: [ 9.781275] Leftover inexact backtrace: 2018-03-31T06:11:24.255085+02:00 linux-86i0 kernel: [ 9.781275] 2018-03-31T06:11:24.255086+02:00 linux-86i0 kernel: [ 9.781303] ---[ end trace 0beb54cbaeaebc1a ]--- Is bumblebeed doing the wrong thing here by not checking the graphics cards state before trying to disable it on startup ? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] misconfigured keyboard: which is correct <keyboard> for HP Envy laptop?
by ken 30 Mar '18

30 Mar '18

Initially This keyboard was functioning fine on a brand-now installation of Leap 24.3 on an HP Envy laptop (17t-n100 CTO). Trying to solve a completely different problem, I went into YaST2 and ran a hardware scan. After doing that, my keyboard was misconfigured and now has numerous problems. E.g., I now have no CapsLock key, neither of my Ctrl keys works, and the leftside Ctrl key now functions like a Super-L key. And there are many more such problems, none of which I ever had in centos or in suse before running that yast hardware scan. Looking around in logs and configs, I found the keyboard specified in /etc/sysconfig/keyboard to be "pc104". I can't say for certain whether that is correct or incorrect, except that "pc104" was mentioned in the log file "/var/log/YaST2/y2log" several times on or about the date/time I ran the hardware scan. So it is highly suspect. Here's that final line from the "keyboard" file: YAST_KEYBOARD="english-us,pc104" In the backups of this machine's previous CentOS (7.x) system there was no /etc/sysconfig/keyboard, but there was /etc/X11/xorg.conf.d/00-keyboard.conf file (programmatically generated) containing this: Section "InputClass" Identifier "system-keyboard" MatchIsKeyboard "on" Option "XkbLayout" "us" Option "XkbModel" "pc105+inet" EndSection If I was a wild-ass cowboy of a sysadmin I'd just replace the "pc104" value in the Leap /etc/sysconfig/keyboard file with the "pc105+inet" value from the CentOS config file and reboot. Yahoo! But that might hork things immensely and leave me with a system with a keyboard even more crippled than what I have now. Does anyone have a more cautious and/or informed solution or suggestion? tnx -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 15

[opensuse] symbol "grub_tmp_measure" after update
by Peter Suetterlin 30 Mar '18

30 Mar '18

Hi list, I have a computer that I upgraded 42.2->42.3 a month ago (without issues). It was powered off since then. Today I rebooted it (again, without issues). I ran a 'zypper up', and rebooted - and now it throws me at grub-rescue with the mentioned error symbol "grub_tmp_measure" not found. grub has been updated during this run. Some quick googling revealed TW was having similar issues about a year ago, still haven't found the main reason then - maybe someone remembers faster than I read? Does it have some kernel relation? That's the only real difference from a standard 42.3, I run a 4.11 kernel (still coming from the 42.2 install, I needed it due to some HW) Especially some quick recovery hints welcome :o -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 7

[opensuse] scanner problems
by jdd＠dodin.org 30 Mar '18

30 Mar '18

Hello, I have strange scanner problems... I have three of them. an HP scanner/printer (usb), a brother scanner/printer (wifi) and an epson 4490 photo. The three of them are pretty old and worked flawlessly since some month ago when I changed my computer. I reused the same disk, so didn't think I will have problem, but didn't used the scanner since. I need them now. but... xsane sees the two printers, but not the epson one iscan (the epson software) sees the epson scanner (so the drivers are ok), but I had to install the 32 bits version, the 64 bits issue many warnings and do not launch My main usual program, VueScan (proprietary) do not see any scanner, when it used to see at least the epson (photo) any idea of what I can do to have the all three seen in the same software? thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 8

[opensuse] LibreOffice 6
by James Knott 29 Mar '18

29 Mar '18

I see LibreOffice 6 is available from https://download.opensuse.org/repositories/LibreOffice:/6.0/openSUSE_Leap_4… Will it be available in the usual Yast update? Or do I have to add the repository? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 12

[opensuse] Howto Check ink levels on HP Envy 7640 printer?
by Mark Hounschell 29 Mar '18

29 Mar '18

Running Leap 42.3, I can't seem to find the proper way to check the ink levels on this printer. This is a wireless network printer BTW. System -> Print Settings -> Ink/Toner Levels Says "Marker levels are not reported for this printer" The printer supports it because the wife can read them in Windows. Thanks Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] repomd.xml
by Mark Misulich 28 Mar '18

28 Mar '18

Hi, for maybe a week or so when I try to update my 42.3 system using zypper, I get this message: #zypper up File '/repodata/repomd.xml' not found on medium 'http://download.opensu se.org/distribution/leap/42.3/repo/non-oss/' It is the same situation for http://download.opensuse.org/distribution/ leap/42.3/repo/oss/ I am just wondering when those files will be restored to the repositories. Or, am I just misunderstanding something about this issue? Thanks, Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] My home server (leap 42.3) crashed during a yast online update.
by Carlos E. R. 28 Mar '18

28 Mar '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, My home server (Leap 42.3) crashed during a yast online update, and I can't boot it up. I need help diagnosing what happened, but more importantly, how to recover it. The machine is UEFI and _had_ secure boot enabled. I simply get black screen after the bios logo, no grub display. Black, no response to the keyboard that I can see. On my desktop machine I downloaded: "openSUSE-Tumbleweed-Rescue-CD-x86_64-Snapshot20180318-Media.iso" and burned to an usb stick. I managed to boot it up after disabling secure boot. I can't convince YaST to enable the Spanish keyboard. Has no joe nor mc, only "vi" (vi is a pain with US keyboard layout on a Spanish keyboard). Network manager does not respond to clicks (responds once in a time, then goes silent for a minute or two). I had to tell yast to use wicked instead. So I got network, killed the firewall, started ssh, created a root password (1234, if you ask me), and got in via ssh with decent keyboard. The last thing I see on the log (thankfully I had syslog on the machine, I would not know how to read journal of dead system) is os-prober running: /var/log/messages: ... <1.5> 2018-03-20T22:27:57.938415+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/10freedos <1.5> 2018-03-20T22:27:57.954019+01:00 Isengard 10freedos - - - debug: /dev/sdc1 is not a FAT partition: exiting <1.5> 2018-03-20T22:27:57.960368+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/10qnx <1.5> 2018-03-20T22:27:57.975764+01:00 Isengard 10qnx - - - debug: /dev/sdc1 is not a QNX4 partition: exiting <1.5> 2018-03-20T22:27:57.981400+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/20macosx <1.5> 2018-03-20T22:27:57.994089+01:00 Isengard macosx-prober - - - debug: /dev/sdc1 is not an HFS+ partition: exiting <1.5> 2018-03-20T22:27:58.003571+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/20microsoft <1.5> 2018-03-20T22:27:58.020164+01:00 Isengard 20microsoft - - - debug: Skipping legacy bootloaders on UEFI system <1.5> 2018-03-20T22:27:58.025907+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/30utility <1.5> 2018-03-20T22:27:58.040597+01:00 Isengard 30utility - - - debug: /dev/sdc1 is not a FAT partition: exiting <1.5> 2018-03-20T22:27:58.046488+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/40lsb <1.5> 2018-03-20T22:27:58.058352+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/70hurd <1.5> 2018-03-20T22:27:58.069980+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/80minix <1.5> 2018-03-20T22:27:58.084577+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/83haiku <1.5> 2018-03-20T22:27:58.099056+01:00 Isengard 83haiku - - - debug: /dev/sdc1 is not a BeFS partition: exiting <1.5> 2018-03-20T22:27:58.104596+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/90linux-distro <1.5> 2018-03-20T22:27:58.123799+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/90solaris <1.5> 2018-03-20T22:27:58.135526+01:00 Isengard 50mounted-tests - - - debug: running subtest /usr/lib/os-probes/mounted/efi <1.5> 2018-03-20T22:27:58.177568+01:00 Isengard os-prober - - - debug: running /usr/lib/os-probes/50mounted-tests on /dev/sdc2 <1.5> 2018-03-20T22:27:58.200879+01:00 Isengard 50mounted-tests - - - debug: /dev/sdc2 is a LUKS partition; skipping <1.5> 2018-03-20T22:27:58.205838+01:00 Isengard os-prober - - - debug: os detected by /usr/lib/os-probes/50mounted-tests <3.5> 2018-03-20T22:28:19.866697+01:00 Isengard dbus 1148 - - [system] Reloaded configuration <3.6> 2018-03-20T22:28:19.877465+01:00 Isengard dbus-daemon 1148 - - Unknown username "systemd-network" in message bus configuration file <3.5> 2018-03-20T22:28:19.889628+01:00 Isengard dbus 1148 - - [system] Reloaded configuration <3.6> 2018-03-20T22:28:20.385417+01:00 Isengard dbus-daemon 1148 - - Unknown username "systemd-network" in message bus configuration file <3.5> 2018-03-20T22:28:20.395558+01:00 Isengard dbus 1148 - - [system] Reloaded configuration <3.6> 2018-03-20T22:28:20.401848+01:00 Isengard dbus-daemon 1148 - - Unknown username "systemd-network" in message bus configuration file <3.5> 2018-03-20T22:28:20.414031+01:00 Isengard dbus 1148 - - [system] Reloaded configuration <3.6> 2018-03-20T22:28:20.579689+01:00 Isengard systemd-sysusers 26699 - - Creating group systemd-network with gid 470. <3.6> 2018-03-20T22:28:20.580433+01:00 Isengard systemd-sysusers 26699 - - Creating user systemd-network (systemd Network Management) with uid 470 and gid 470. <3.5> 2018-03-20T22:28:20.587314+01:00 Isengard nscd - - - 1129 monitored file `/etc/group` was moved into place, adding watch <3.5> 2018-03-20T22:28:20.589487+01:00 Isengard nscd - - - 1129 monitored file `/etc/passwd` was moved into place, adding watch <3.5> 2018-03-20T22:28:20.762900+01:00 Isengard systemd 1 - - Reexecuting. <3.6> 2018-03-20T22:28:20.874619+01:00 Isengard systemd 1 - - systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) <3.6> 2018-03-20T22:28:20.881127+01:00 Isengard systemd 1 - - Detected architecture x86-64. <3.4> 2018-03-20T22:28:21.006496+01:00 Isengard systemd 1 - - nss-lookup.target: Dependency Before=nss-lookup.target dropped <3.6> 2018-03-20T22:28:21.356896+01:00 Isengard systemd 1 - - Reloading. <3.4> 2018-03-20T22:28:21.578113+01:00 Isengard systemd 1 - - nss-lookup.target: Dependency Before=nss-lookup.target dropped <3.6> 2018-03-20T22:28:55.931363+01:00 Isengard systemd 1 - - Reloading. <3.4> 2018-03-20T22:28:56.145780+01:00 Isengard systemd 1 - - nss-lookup.target: Dependency Before=nss-lookup.target dropped <3.6> 2018-03-20T22:28:56.226067+01:00 Isengard systemd 1 - - Reloading. <3.4> 2018-03-20T22:28:56.502914+01:00 Isengard systemd 1 - - nss-lookup.target: Dependency Before=nss-lookup.target dropped <3.6> 2018-03-20T22:28:56.567912+01:00 Isengard systemd 1 - - Closed udev Control Socket. <3.6> 2018-03-20T22:28:56.608803+01:00 Isengard systemd 1 - - Stopping udev Control Socket. <3.3> 2018-03-20T22:28:56.615726+01:00 Isengard systemd 1 - - systemd-udevd-control.socket: Socket service systemd-udevd.service already active, refusing. <3.3> 2018-03-20T22:28:56.616377+01:00 Isengard systemd 1 - - Failed to listen on udev Control Socket. <3.6> 2018-03-20T22:28:56.626341+01:00 Isengard systemd 1 - - Closed udev Kernel Socket. <3.6> 2018-03-20T22:28:56.630180+01:00 Isengard systemd 1 - - Stopping udev Kernel Socket. <3.3> 2018-03-20T22:28:56.634330+01:00 Isengard systemd 1 - - systemd-udevd-kernel.socket: Socket service systemd-udevd.service already active, refusing. <3.3> 2018-03-20T22:28:56.635065+01:00 Isengard systemd 1 - - Failed to listen on udev Kernel Socket. <3.6> 2018-03-20T22:28:56.635569+01:00 Isengard systemd 1 - - Reloading. <3.4> 2018-03-20T22:28:56.844171+01:00 Isengard systemd 1 - - nss-lookup.target: Dependency Before=nss-lookup.target dropped <3.6> 2018-03-20T22:28:56.908439+01:00 Isengard systemd 1 - - Stopping udev Kernel Device Manager... <3.6> 2018-03-20T22:28:56.917362+01:00 Isengard systemd 1 - - Stopped udev Kernel Device Manager. <3.6> 2018-03-20T22:28:56.917988+01:00 Isengard systemd 1 - - Listening on udev Kernel Socket. <3.6> 2018-03-20T22:28:56.921780+01:00 Isengard systemd 1 - - Listening on udev Control Socket. <3.6> 2018-03-20T22:28:56.934881+01:00 Isengard systemd 1 - - Starting udev Kernel Device Manager... <3.6> 2018-03-20T22:28:56.943390+01:00 Isengard systemd-udevd 27692 - - Network interface NamePolicy= disabled by default. <3.6> 2018-03-20T22:28:57.006406+01:00 Isengard systemd 1 - - Started udev Kernel Device Manager. And died, suddenly. Black screen when I looked. The system has a new UPS, so power did not fail. /var/log/zypp/history: 2018-03-20 22:28:52|install|yast2|3.2.43-2.3.1|x86_64||download.opensuse.org-oss_1|b5037cca5b07e60124caff0cd63e2742aba4d8219bef6da7b314b0bcc6638277| 2018-03-20 22:28:52|install|dhcp-client|4.3.3-11.3.1|x86_64||download.opensuse.org-oss_1|74bb46c281463504334f8533d15a128a015eae4d86b84aaeb6fb322975e6a6e8| 2018-03-20 22:28:52|install|typelib-1_0-WebKit2-4_0|2.18.5-8.1|x86_64||download.opensuse.org-oss_1|570b50e9a6dfbafa8accc2d89dd79e8271602039fef4e050da9b30dd499ad8fa| 2018-03-20 22:28:54|install|shotwell|0.22.0+git.20160103-16.1|x86_64||download.opensuse.org-oss_1|54bcf5cebd4ca40644925eb10402151dc6a228402499e0701f907563d4211616| 2018-03-20 22:28:57|install|udev|228-47.1|x86_64||download.opensuse.org-oss_1|e8d28bbc820e881c529f998f6289d1c953006182346bd97a5ec8a9251563dcf3| # 2018-03-20 22:28:57 libedata-cal-1_2-28-3.22.7-7.3.1.x86_64.rpm installed ok # Additional rpm output: # /sbin/ldconfig: /usr/lib64/libscintilla.so.3 is not a symbolic link # # /sbin/ldconfig: /usr/lib64/libscintilla.so.3 is not a symbolic link # # 2018-03-20 22:28:57|install|libedata-cal-1_2-28|3.22.7-7.3.1|x86_64||download.opensuse.org-oss_1|f9ae2575118b0898cb2f799cc720a52fa044e4fcc6681dbadba8779476f1da17| 2018-03-20 22:28:57|install|java-1_8_0-openjdk|1.8.0.161-21.1|x86_64||download.opensuse.org-oss_1|6238c300ff999fe6e0389377a7ebb67771c9a3a845492014debf64fe3deabd20| 2018-03-20 22:28:57|install|java-1_7_0-openjdk|1.7.0.171-48.3|x86_64||download.opensuse.org-oss_1|faa57b26c632f86b266f2ada096b830bdc3047c496de212d50d886ca6bf09b1e| 2018-03-20 22:28:57|install|icewm-lite|1.3.12-6.3.1|x86_64||download.opensuse.org-oss_1|de773a7b2c1eb79814a8b2442265a2c3271d687b3ad1b3c01e23c453ff070b6d| /var/log/YaST2/y2log: 2018-03-20 22:28:53 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):249 Executing 'rpm' '--root' '/' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--noglob' '--force' '--nodeps' '--' '/var/cache/zypp/packages/download.opensuse.org-oss_1/x86_64/shotwell-0.22.0+git.20160103-16.1.x86_64.rpm' 2018-03-20 22:28:53 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):412 pid 27599 launched 2018-03-20 22:28:54 <1> Isengard(32077) [zypp++] ExternalProgram.cc(checkStatus):513 Pid 27599 successfully completed 2018-03-20 22:28:54 <1> Isengard(32077) [Ruby] modules/PackageCallbacks.rb:520 Additional RPM otput: 2018-03-20 22:28:54 <1> Isengard(32077) [zypp::posttrans++] RpmPostTransCollector.cc(tmpDir):153 /var/adm/update-scripts/posttransnNI30P 2018-03-20 22:28:54 <1> Isengard(32077) [zypp::posttrans] RpmPostTransCollector.cc(collectScriptFromPackage):70 COLLECT posttrans: /var/adm/update-scripts/posttransnNI30P/udev-228-47.1.x86_64.rpmyxSVK9{- 0700 0/0 size 214} 2018-03-20 22:28:54 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):249 Executing 'rpm' '--root' '/' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--noglob' '--force' '--nodeps' '--noposttrans' '--' '/var/cache/zypp/packages/download.opensuse.org-oss_1/x86_64/udev-228-47.1.x86_64.rpm' 2018-03-20 22:28:54 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):412 pid 27622 launched 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(checkStatus):513 Pid 27622 successfully completed 2018-03-20 22:28:57 <1> Isengard(32077) [Ruby] modules/PackageCallbacks.rb:520 Additional RPM otput: 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):249 Executing 'rpm' '--root' '/' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--noglob' '--force' '--nodeps' '--' '/var/cache/zypp/packages/download.opensuse.org-oss_1/x86_64/libedata-cal-1_2-28-3.22.7-7.3.1.x86_64.rpm' 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):412 pid 27695 launched 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(checkStatus):513 Pid 27695 successfully completed 2018-03-20 22:28:57 <1> Isengard(32077) [Ruby] modules/PackageCallbacks.rb:520 Additional RPM otput: 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):249 Executing 'rpm' '--root' '/' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--noglob' '--force' '--nodeps' '--' '/var/cache/zypp/packages/download.opensuse.org-oss_1/x86_64/java-1_8_0-openjdk-1.8.0.161-21.1.x86_64.rpm' 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):412 pid 27698 launched 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(checkStatus):513 Pid 27698 successfully completed 2018-03-20 22:28:57 <1> Isengard(32077) [Ruby] modules/PackageCallbacks.rb:520 Additional RPM otput: 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):249 Executing 'rpm' '--root' '/' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--noglob' '--force' '--nodeps' '--' '/var/cache/zypp/packages/download.opensuse.org-oss_1/x86_64/java-1_7_0-openjdk-1.7.0.171-48.3.x86_64.rpm' 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):412 pid 27699 launched 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(checkStatus):513 Pid 27699 successfully completed 2018-03-20 22:28:57 <1> Isengard(32077) [Ruby] modules/PackageCallbacks.rb:520 Additional RPM otput: 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):249 Executing 'rpm' '--root' '/' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--noglob' '--force' '--nodeps' '--' '/var/cache/zypp/packages/download.opensuse.org-oss_1/x86_64/icewm-lite-1.3.12-6.3.1.x86_64.rpm' 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):412 pid 27700 launched 2018-03-20 22:28:57 <1> Isengard(32077) [zypp++] ExternalProgram.cc(checkStatus):513 Pid 27700 successfully completed 2018-03-20 22:28:57 <1> Isengard(32077) [Ruby] modules/PackageCallbacks.rb:520 Additional RPM otput: 2018-03-20 22:28:58 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):249 Executing 'rpm' '--root' '/' '--dbpath' '/var/lib/rpm' '-U' '--percent' '--noglob' '--force' '--nodeps' '--' '/var/cache/zypp/packages/download.opensuse.org-oss_1/x86_64/grub2-x86_64-efi-2.02-7.1.x86_64.rpm' 2018-03-20 22:28:58 <1> Isengard(32077) [zypp++] ExternalProgram.cc(start_program):412 pid 27704 launched So the last thing that was being installed was "grub2-x86_64-efi-2.02-7.1.x86_64.rpm" at 22:28:58, but systemd and udev were doing something that I don't understand. Now, how do I recover from this? I downloaded "bootinfoscript" and run it. RESULTS.txt attached. sda is the server disk. sda4 is the root, sda5 home. sdb is the rescue system. localhost:~ # lsblk --output NAME,KNAME,RA,RM,RO,SIZE,TYPE,FSTYPE,LABEL,PARTLABEL,MOUNTPOINT,UUID,PARTUUID,WWN,MODEL,ALIGNMENT NAME KNAME RA RM RO SIZE TYPE FSTYPE LABEL PARTLABEL MOUNTPOINT UUID PARTUUID WWN MODEL ALIGNMENT loop0 loop0 512 0 1 529.8M loop squash /run/initramf 0 loop1 loop1 512 0 1 3G loop ext4 /run/rootfsba a7f2c9f2-6b5d-4fe8-bb0a-9b8a9001a59e 0 sda sda 512 0 0 111.8G disk KINGSTON SMS 0 ├─sda1 sda1 512 0 0 156M part vfat primary BD39-068A cada5ef3-03a1-4d0b-a984-49c1c16c75bb 0 ├─sda2 sda2 512 0 0 9G part swap Swap primary dee28afc-9697-4f8c-9b42-da0cf6da0ff1 53321f59-61c7-48f0-a358-fedac3882160 0 ├─sda3 sda3 512 0 0 9G part ext4 Other primary 2d5ceee1-bb49-4afd-8b36-0fb76937172c 375c1f95-f5f8-434d-8268-8a4a708b6a8a 0 ├─sda4 sda4 512 0 0 20G part ext4 System primary /run/media/li 0d457df1-b43d-4587-aa5a-6c919bcbedb8 45be0ffb-ec39-4fb3-b44b-dc87d96c05ab 0 └─sda5 sda5 512 0 0 70G part crypto primary ff42b205-a2a7-4d9a-84e9-4729c6775108 78016944-086f-4603-9673-2485beb1388d 0 sdb sdb 512 1 0 7.2G disk iso966 openSUSE_Tumbleweed_Rescue_CD 2018-03-19-12-59-39-31 TransMemory 0 ├─sdb1 sdb1 512 1 0 15M part vfat BOOT 3993-FBBB 407025f9-01 0 ├─sdb2 sdb2 512 1 0 619.8M part iso966 openSUSE_Tumbleweed_Rescue_CD /run/initramf 2018-03-19-12-59-36-28 407025f9-02 0 └─sdb3 sdb3 512 1 0 6.6G part ext4 cow /run/overlayf 5466dd47-a5ba-40fe-8ee0-d730735fcab2 407025f9-03 0 localhost:~ # localhost:~ # df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 3.8G 8.0K 3.8G 1% /dev tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs 3.9G 18M 3.9G 1% /run tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sdb2 619M 619M 0 100% /run/initramfs/live /dev/loop0 530M 530M 0 100% /run/initramfs/squashfs_container /dev/loop1 2.9G 2.1G 623M 78% /run/rootfsbase /dev/sdb3 6.5G 316M 5.8G 6% /run/overlayfs LiveOS_rootfs 6.5G 316M 5.8G 6% / tmpfs 784M 8.0K 784M 1% /run/user/1000 tmpfs 784M 0 784M 0% /run/user/0 /dev/sda4 20G 14G 4.7G 76% /run/media/linux/System localhost:~ # So, disk is not full. The machine contains two openSUSE Linux systems; the other is labelled "Other". I can boot none, as the display goes completely black when Grub should display. What do I do to recover this machine? Try to install grub again? I don't know if it is installed at all at this point. I have a headache... - -- Cheers Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlqxl5MACgkQtTMYHG2NR9URgQCfYRD+2LHUXBAi+YkR5qV8sC6j s1YAnRp1x0RNxOschbgISqAnba1jIw8T =mqmY -----END PGP SIGNATURE-----

3 7

[opensuse] clamd curiosity
by Carlos E. R. 28 Mar '18

28 Mar '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I just noticed that "clamdscan" can not scan almost anything: cer@Telcontar:~> clamdscan /tmp/* /tmp/320d47c9-cfa9-433a-ad1d-2b24b11df4ee: OK /tmp/BootInfo-CZkghR2J: lstat() failed: Permission denied. ERROR /tmp/BootInfo-r7ePTyOE: lstat() failed: Permission denied. ERROR /tmp/VMwareDnD: OK /tmp/YaST2-01430-lMTcNo: lstat() failed: Permission denied. ERROR /tmp/c7f75ac9-b4e3-4f32-9277-4a3425dcc928: OK /tmp/calibre-installer-cache: OK /tmp/check_no_plus.1Acv: OK ... /tmp/check_sysctl.zpHH: OK /tmp/conflicts.txt: OK /tmp/dar_la_hora_en_cron.log: OK /tmp/dialgo.wav.03DckDFBAoOhq: Access denied. ERROR /tmp/dialgo.wav.1YmOqdIaczlIz: Access denied. ERROR /tmp/dialgo.wav.2RBwjb4jWWdTM: Access denied. ERROR /tmp/dialgo.wav.2gHJ2SsXSI7Oo: Access denied. ERROR ... /tmp/dialgo.wav.zs3pmaMYt8mye: Access denied. ERROR /tmp/e6fa4579-b26d-442a-9342-857f994b3f07: OK /tmp/firefox_cer: lstat() failed: Permission denied. ERROR /tmp/generar.log: OK /tmp/gpg-xcr0WB: lstat() failed: Permission denied. ERROR /tmp/hsperfdata_root: OK /tmp/kde-root: lstat() failed: Permission denied. ERROR /tmp/libstorage-Y2DQAK: lstat() failed: Permission denied. ERROR /tmp/mc-root: lstat() failed: Permission denied. ERROR /tmp/procmail_cer: OK /tmp/rpm-md5.0FTZ: Access denied. ERROR /tmp/rpm-md5.2KYB: Access denied. ERROR ... /tmp/specia_files_owner.x0Vr: Access denied. ERROR /tmp/specia_files_owner.x8CC: Access denied. ERROR /tmp/ssh-oRhjHZ8E73LJ: lstat() failed: Permission denied. ERROR /tmp/systemd-private-0u2UcV: lstat() failed: Permission denied. ERROR /tmp/systemd-private-1dtMRP: lstat() failed: Permission denied. ERROR /tmp/systemd-private-1e192c2431f146d9afc71f88a0b8b32d-apache2.service-mlxebp: lstat() failed: Permission denied. ERROR /tmp/systemd-private-1e192c2431f146d9afc71f88a0b8b32d-ntpd.service-qKBKXN: lstat() failed: Permission denied. ERROR /tmp/systemd-private-1e192c2431f146d9afc71f88a0b8b32d-rtkit-daemon.service-d3hE5L: lstat() failed: Permission denied. ERROR ... /tmp/systemd-private-yf0F0p: lstat() failed: Permission denied. ERROR /tmp/thunderbird_cer: lstat() failed: Permission denied. ERROR /tmp/tracker-extract-files.0: lstat() failed: Permission denied. ERROR /tmp/vmware-root: lstat() failed: Permission denied. ERROR /tmp/vmwareNetworking.oZD9uQ: Access denied. ERROR /tmp/y2log-jxeqWb.tar.xz: Access denied. ERROR - ----------- SCAN SUMMARY ----------- Infected files: 0 Total errors: 277 Time: 0.076 sec (0 m 0 s) cer@Telcontar:~> My reading is that the files are opened directly by the daemon, not by clamdscan, with the clamd permissions, not those of the user calling the scan. It means that with clamdscan, which is faster than clamscan (15 seconds to load), I can not scan my own user directory. Only those files that are readable by all. But worse is that this is logged to the warn syslog! Ie, it spams the warning log: <2.4> 2018-03-28 14:58:58 Telcontar clamd 4317 - - lstat() failed on: /tmp/systemd-private-veb9BL <2.4> 2018-03-28 14:58:58 Telcontar clamd 4317 - - lstat() failed on: /tmp/systemd-private-yf0F0p <2.4> 2018-03-28 14:58:58 Telcontar clamd 4317 - - lstat() failed on: /tmp/thunderbird_cer <2.4> 2018-03-28 14:58:58 Telcontar clamd 4317 - - lstat() failed on: /tmp/tracker-extract-files.0 <2.4> 2018-03-28 14:58:58 Telcontar clamd 4317 - - lstat() failed on: /tmp/vmware-root - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlq7lJUACgkQtTMYHG2NR9X5qQCeOEtgapBG2o13RyXwfWto2EhV YPEAnjCOQqJsVW+uHEoi2RvZfxpY9YHF =f/TQ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] openSUSE software downloads and certificates
by Roger Oberholtzer 28 Mar '18

28 Mar '18

Is there a description of the idea/method behind the use of certificates to ensure that one (zypper?) is getting software from the real repository? I ask because our company is stepping up security and will start being very picky about where software comes from. They have made three categories: white (approved source), black (disallowed source) and gray (unclear/undecided sources). They are lumping all open source software in the gray category. I would like openSUSE to be on the white list. I'm not sure what the procedure will be. But I guess I can start by gathering information on what steps openSUSE take to try to ensure that at least the built packages come from where one thinks they do. Of course, the source itself is a different question. I suspect that this list will be maintained by a service the company will use and will not be something managed internally. It is expected to be used world wide in our company. Any pointers on relevant information is greatly appreciated. As part of this step up of security, it is still unclear if I will be able to dual boot Leap alongside the company's installed Windows 10 (needed for doing time reports - otherwise not needed by me). -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 30

[opensuse] NVRM: API mismatch: the client has the version 340.106, but this kernel module has the version 340.104.
by Carlos E. R. 26 Mar '18

26 Mar '18

Hi, After the kernel update I did yesterday (YOU), my warn log is full of that. <0.4> 2018-03-24 10:40:48 Telcontar kernel - - - [27870.142976] NVRM: API mismatch: the client has the version 340.106, but <0.4> 2018-03-24 10:40:48 Telcontar kernel - - - [27870.142976] NVRM: this kernel module has the version 340.104. Please <0.4> 2018-03-24 10:40:48 Telcontar kernel - - - [27870.142976] NVRM: make sure that this kernel module and all NVIDIA driver <0.4> 2018-03-24 10:40:48 Telcontar kernel - - - [27870.142976] NVRM: components have the same version. <0.4> 2018-03-24 10:40:48 Telcontar kernel - - - [27870.142981] NVRM: nvidia_frontend_ioctl: minor 255, module->ioctl failed, error -22 <0.4> 2018-03-24 10:40:59 Telcontar kernel - - - [27881.608407] NVRM: API mismatch: the client has the version 340.106, but <0.4> 2018-03-24 10:40:59 Telcontar kernel - - - [27881.608407] NVRM: this kernel module has the version 340.104. Please <0.4> 2018-03-24 10:40:59 Telcontar kernel - - - [27881.608407] NVRM: make sure that this kernel module and all NVIDIA driver <0.4> 2018-03-24 10:40:59 Telcontar kernel - - - [27881.608407] NVRM: components have the same version. <0.4> 2018-03-24 10:40:59 Telcontar kernel - - - [27881.608412] NVRM: nvidia_frontend_ioctl: minor 255, module->ioctl failed, error -22 ... <0.4> 2018-03-24 10:49:39 Telcontar kernel - - - [28401.172793] NVRM: nvidia_frontend_ioctl: minor 255, module->ioctl failed, error -22 That was the last entry, this morning. Telcontar:~ # rpm -qa | grep -i nvidia x11-video-nvidiaG03-340.106-11.1.x86_64 nvidia-gfxG03-kmp-default-340.106_k4.4.76_1-11.1.x86_64 nvidia-computeG03-340.106-11.1.x86_64 nvidia-glG03-340.106-11.1.x86_64 nvidia-uvm-gfxG03-kmp-default-340.106_k4.4.76_1-11.1.x86_64 Telcontar:~ # I know that my nvidia drivers are not the latest, I don't like to update them because they tend to bomb-out. Should I? -- Cheers / Saludos, Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar)

2 3

[opensuse] /var/log/warn privacy?
by Dave Howorth 26 Mar '18

26 Mar '18

After Carlos' recent message about NVRM, I looked at my /var/log/warn (before I realized his problem was NV specific). One thing I noticed was a bunch of warnings from org.mate.atril.Daemon[3030] that included things like UnregisterDocument URI 'file:///tmp/mozilla_dhoworth0/UFPLS-Factsheet.pdf' It seems wrong that the filenames of documents I'm looking at should be exposed in a public log file like that. Indeed since nothing was wrong as far as I am aware, I don't understand why there is a warning at all. Is that an atril bug (or bugs), or am I missing something? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 7

[opensuse] What is Python 'backports.tempfile'
by Roger Oberholtzer 26 Mar '18

26 Mar '18

I just tried running a local Python app, and I now get this error: Traceback (most recent call last): File "/opt/rsoft/lib/rmt/stat/rmtstat.pyw", line 43, in <module> from z3c.rml import rml2pdf File "/usr/lib/python2.7/site-packages/z3c/rml/__init__.py", line 6, in <module> __version__ = pkg_resources.require('z3c.rml')[0].version File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 892, in require needed = self.resolve(parse_requirements(requirements)) File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 778, in resolve raise DistributionNotFound(req, requirers) pkg_resources.DistributionNotFound: The 'backports.tempfile' distribution was not found and is required by z3c.rml I do not know when this may have started. Could it be that I need a new python package? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] postfix problem after update
by Carlos E. R. 25 Mar '18

25 Mar '18

I did an update some hours ago, and after rebooting I noticed that posting did not work. I then saw this in the log, by the hundreds: 2.4> 2018-03-24 00:57:56 Telcontar postfix 4336 - - warning: process /usr/lib/postfix/bin//smtpd pid 17645 exit status 1 <2.4> 2018-03-24 00:57:56 Telcontar postfix 4336 - - warning: /usr/lib/postfix/bin//smtpd: bad command startup -- throttling <2.2> 2018-03-24 00:58:16 Telcontar postfix 30967 - - fatal: in parameter smtpd_relay_restrictions or smtpd_recipient_restrictions, specify at least one working instance of: reject_unauth_destination, defer_unauth_destination, reject, defer, defer_if_permit or check_relay_domains I have not changed the config at all, so this must be some new default. There is no "smtpd_relay_restrictions" in my main.cf. There is no active "smtpd_recipient_restrictions" in my master.cf, I only have commented out entries. I don't know what has changed, so I have no idea at this moment what to change. I have set: smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination and it works. Comments? -- Cheers / Saludos, Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar)

4 5

Re: [opensuse] postfix problem after update
by Carlos E. R. 25 Mar '18

25 Mar '18

On 2018-03-25 17:58, Per Jessen wrote: > Carlos E. R. wrote: >> On 2018-03-25 12:58, Per Jessen wrote: >>> Carlos E. R. wrote: ... >>>> I did an update some hours ago, and after rebooting I noticed that >>>> posting did not work. I then saw this in the log, by the hundreds: >>>> >>>> <2.4> 2018-03-24 00:57:56 Telcontar postfix 4336 - - warning: >>>> process /usr/lib/postfix/bin//smtpd pid 17645 exit status 1 >>>> <2.4> 2018-03-24 00:57:56 Telcontar postfix 4336 - - warning: >>>> /usr/lib/postfix/bin//smtpd: bad command startup -- throttling >>>> <2.2> 2018-03-24 00:58:16 Telcontar postfix 30967 - - fatal: in >>>> parameter smtpd_relay_restrictions or smtpd_recipient_restrictions, >>>> specify at least one working instance of: reject_unauth_destination, >>>> defer_unauth_destination, reject, defer, defer_if_permit or >>>> check_relay_domains >>>> >>>> I have not changed the config at all, so this must be some new >>>> default. >>>> >>>> There is no "smtpd_relay_restrictions" in my main.cf. >>> So the default setting will apply. >> >> The default is empty: >> >> Telcontar:~ # postconf smtpd_recipient_restrictions >> smtpd_recipient_restrictions = > > FYI, you get the default postfix setting with '-d' : > > postconf -d | grep _relay_ > > smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, > defer_unauth_destination And here I get: smtpd_recipient_restrictions = >>>> and it works. Comments? >>> >>> Leap423 comes with postfix-3.2.0-1.4 - the vanilla install does indeed >>> have "smtpd_recipient_restrictions = <blank>", but starts up fine. >>> There is no update for postfix in Leap423. >> >> I have "postfix-3.3.0-324.1.x86_64" from repo >> "Productivity/Networking/Email/Servers" >> >> I have postfix and dovecot from that repo, perhaps Alpine too. > > Then you're on your own I think. Sounds like some configuration check > was tightened sometime after 3.2.0. It seems so. -- Cheers / Saludos, Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar)

1 0

[opensuse] systemd, fstab and nfs mounts
by mh＠mike.franken.de 25 Mar '18

25 Mar '18

Hi *, I have the following two entries in my /etc/fstab: # nfs mounts video.domain.my:/var/spool/video/video0 /var/spool/video/video0 nfs auto,_netdev 0 0 video.domain.my:/var/spool/video/video0 /upnp-root-remote/VDR_Videos nfs auto,_netdev 0 0 On Leap 42.3 with latest hotfixes I always get an error on boot for the second one, while the first one mounts correctly. In the journal one can see the following entries: ------------------------< snip snip snip >----------------------------- [...] 21:51:20 syslogsrv systemd[1]: Mounting /upnp-root-remote/VDR_Videos... [...] 21:51:23 syslogsrv systemd[1]: upnp\x2droot\x2dremote-VDR_Videos.mount: Mount process exited, code=exited status=32 21:51:21 syslogsrv named[3077]: listening on IPv4 interface lo, 127.0.0.1#53 21:51:23 syslogsrv systemd[1]: Failed to mount /upnp-root-remote/VDR_Videos. 21:51:21 syslogsrv named[3077]: listening on IPv4 interface br0, 192.168.1.8#53 21:51:23 syslogsrv systemd[1]: Dependency failed for Remote File Systems. 21:51:21 syslogsrv named[3077]: listening on IPv4 interface br0:1, 192.168.129.8#53 21:51:24 syslogsrv systemd[1]: remote-fs.target: Job remote-fs.target/start failed with result 'dependency'. 21:51:24 syslogsrv systemd[1]: upnp\x2droot\x2dremote-VDR_Videos.mount: Unit entered failed state. 21:51:30 syslogsrv mount[3010]: mount.nfs: Failed to resolve server video.domain.my: Name or service not known [...] 21:51:37 syslogsrv systemd[1]: Started NFS server and services. 21:51:37 syslogsrv systemd[1]: Mounting /var/spool/video/video0... 21:51:38 syslogsrv systemd[1]: Starting Notify NFS peers of a restart... 21:51:39 syslogsrv systemd[1]: Mounted /var/spool/video/video0. 21:51:40 syslogsrv systemd[1]: Started Notify NFS peers of a restart. [...] ------------------------< snip snip snip >----------------------------- systemd tries to mount the second fstab entry before the network and name resolution are available, while the first one is mounted correctly after the network is available and named has been started. And yes, the entries are shown in that order in the journal, though the time seems to jump back and forth. I can't see any difference between the two entries. Why does systemd treat them different? Thx and bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 8

[opensuse] Can't install VLC, dependencies broken.
by Carlos E. R. 25 Mar '18

25 Mar '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 #### YaST2 conflicts list - generated 2018-03-23 19:49:01 #### vlc-devel-2.2.6-8.5.x86_64 requires vlc = 2.2.6, but this requirement cannot be provided deleted providers: vlc-2.2.6-8.4.x86_64 uninstallable providers: vlc-2.2.6-8.5.x86_64[EXT_Packman] vlc-2.2.6-1.1.x86_64[download.opensuse.org-oss] vlc-2.2.6-3.1.x86_64[download.opensuse.org-oss_1] [ ] do not install vlc-devel-2.2.6-8.5.x86_64 [ ] Following actions will be done: keep vlc-2.2.6-8.4.x86_64 keep vlc-qt-2.2.6-8.4.x86_64 do not install vlc-beta-devel-4.0.0.20180221.eaac4ae231-1.5.x86_64 [ ] break vlc-devel-2.2.6-8.5.x86_64 by ignoring some of its dependencies phonon4qt5-backend-vlc-0.9.0-3.3.x86_64 requires vlc-noX >= 2.2.6, but this requirement cannot be provided deleted providers: vlc-noX-2.2.6-8.4.x86_64 uninstallable providers: vlc-noX-2.2.6-8.5.x86_64[EXT_Packman] vlc-noX-2.2.8-239.6.x86_64[OBSH_plater] vlc-noX-2.2.6-1.1.x86_64[download.opensuse.org-oss] vlc-noX-2.2.6-3.1.x86_64[download.opensuse.org-oss_1] [ ] break phonon4qt5-backend-vlc-0.9.0-3.3.x86_64 by ignoring some of its dependencies [ ] keep vlc-noX-2.2.6-8.4.x86_64 [ ] do not install phonon4qt5-backend-vlc-0.9.0-3.3.x86_64 vlc-beta-noX-4.0.0.20180221.eaac4ae231-1.5.x86_64 requires libmatroska.so.6(V_1.4.5)(64bit), but this requirement cannot be provided [ ] break vlc-beta-noX-4.0.0.20180221.eaac4ae231-1.5.x86_64 by ignoring some of its dependencies [ ] Following actions will be done: do not install vlc-beta-noX-4.0.0.20180221.eaac4ae231-1.5.x86_64 do not install vlc-beta-noX-lang-4.0.0.20180221.eaac4ae231-1.5.noarch do not install vlc-beta-devel-4.0.0.20180221.eaac4ae231-1.5.x86_64 [ ] do not install libmatroska6-1.4.8-77.1.x86_64 mkvtoolnix-20.0.0-202.4.x86_64 requires libmatroska.so.6(V_1.4.7)(64bit), but this requirement cannot be provided uninstallable providers: libmatroska6-1.4.8-77.1.x86_64[OBS:_Multimedia:_libs] [ ] do not install mkvtoolnix-20.0.0-202.4.x86_64 [ ] Following actions will be done: do not install vlc-beta-qt-4.0.0.20180221.eaac4ae231-1.5.x86_64 do not install vlc-beta-noX-lang-4.0.0.20180221.eaac4ae231-1.5.noarch do not install vlc-beta-devel-4.0.0.20180221.eaac4ae231-1.5.x86_64 [ ] break mkvtoolnix-20.0.0-202.4.x86_64 by ignoring some of its dependencies mkvtoolnix-gui-20.0.0-202.4.x86_64 requires libmatroska.so.6(V_1.4.7)(64bit), but this requirement cannot be provided uninstallable providers: libmatroska6-1.4.8-77.1.x86_64[OBS:_Multimedia:_libs] [ ] do not install mkvtoolnix-gui-20.0.0-202.4.x86_64 [ ] break mkvtoolnix-gui-20.0.0-202.4.x86_64 by ignoring some of its dependencies [ ] Following actions will be done: do not install vlc-beta-4.0.0.20180221.eaac4ae231-1.5.x86_64 do not install vlc-beta-noX-lang-4.0.0.20180221.eaac4ae231-1.5.noarch do not install vlc-beta-devel-4.0.0.20180221.eaac4ae231-1.5.x86_64 #### YaST2 conflicts list END ### - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlq1TOUACgkQtTMYHG2NR9UUQACggbYfjtxPBKL1v3f7gRDWxk7+ CwoAn1VZiJs83VthAh7UqvVODFe13wHC =BrUY -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 24

[opensuse] Libreoffice 5.3 in Leap 42.3 menu font too small and toolbar icons invisible
by Istvan Gabor 25 Mar '18

25 Mar '18

Hello: This is an openSUSE Leap 42.3 system with KDE3.5 default desktop. KDE4 (Wolfi's framework) packages are also installed. The official Libreoffice (5.3.5.2) has almost unreadable tiny menu and user interface fonts. The toolbar icons are barely visible. Here is a screenshot. I included a Seamonkey window to show what menu font size I would like to have. http://i64.tinypic.com/5uebsp.jpg How can I fix these? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 12

[opensuse] k3b puts up errors
by Patrick Shanahan 25 Mar '18

25 Mar '18

don't use them much any more, but had occasion to need to burn a dvd and k3b puts up a window full of processes, mostly bash, that it says need to be closed to proceed. says those processess will interfer with burning. and closing those processes restarts the graphics.target. not finding a quick solution, installed xfburn and burned iso to dvd w/o problem. just wondered if anyone else noticed a problem. next step is to remove complete k3b and configurations and reinstall. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 19

Re: [opensuse] Can't install VLC, dependencies broken.
by Dave Howorth 24 Mar '18

24 Mar '18

On Sat, 24 Mar 2018 16:57:37 -0400 Patrick Shanahan <paka(a)opensuse.org> wrote: > * Dave Howorth <dave(a)howorth.org.uk> [03-24-18 16:43]: > > On Sat, 24 Mar 2018 12:08:27 -0400 > > Patrick Shanahan <paka(a)opensuse.org> wrote: > > > > > * Peter Suetterlin <pit(a)astro.su.se> [03-24-18 12:03]: > > > > Patrick Shanahan wrote: > > > > > > > > > so wait until the requirements are updated or corrected. > > > > > mistakes happen > > > > > > > > Do you *really* have to quote almost 100 lines just to put this > > > > wisdom at the end? > > > > > > you already know the answer. I have become quite tired of > > > continually removing 100s of lines of quoting and/or needless > > > information, long sigs, pgp sigs, ... > > > > > > this forum might as well be merged with opensuse-offtopic for the > > > endless threads of "mee tooo", and about correcting problems on > > > umbuntuu or windows or .... > > > > > > forum really needs a full-time-monitor. > > > > > > consideration is a lost art. > > > > So stop posting here and go to the forums if you don't like the way > > this list operates. > > helpful thanks ;) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] getting rid of snapshots
by Albert Oszkó 24 Mar '18

24 Mar '18

Hi all, I want to get rid of snapshots, because they filled my / volume. I ran snapper delete, and limited the number of snapshots to 1, and disabled snapper in yast2 config. I got only very little space back. If I understood well what I read to physically remove files from /.snaphots, I would need to run suse.de-snapper and btrfs-balance found in /etc/cron.daily and cron.weekly directories. But I do not have any of them. Where are they? I use Tumbleweed with KDE. Thanks, Albert

5 12

[opensuse] 42.3 bad NUMLOCK state in vttys in UEFI (Kaby Lake aka newer than 42.3) only
by Felix Miata 24 Mar '18

24 Mar '18

https://bugzilla.opensuse.org/show_bug.cgi?id=1010880 systemd: NUMLOCK configuration not taken into account due to mistakenly removed patch 'handle-numlock-value-in-etc-sysconfig-keyboard.patch' original description: NUMLOCK configuration not taken into account "FIXED" (as of Feb 2018) for 15.0 and TW, but undetermined state for 42.3 originally reported November 2016 against 42.2 running 4.4 kernel This bug was mostly untouched for its first year from filing, with no evidence of being worked on by any dev during that period. First NEEDINFO was applied after release of 42.3. I'm trying to figure out whether my Kaby Lake, which post-dates the original release of kernel 4.4 by quite some months, is a victim of this bug, or some other bug that may be a software regression and thus fixable for 42.3. All my hardware is desktop x86 PC with BIOS set to NUM ON at boot and full US 101 or newer keyboard. I'm a touch typist heavily dependent on the NUM pad at all times. All my hardware was considerably older than the 4.4 kernel until December, when I bought my UEFI Kaby Lake and installed 42.3, 15.0a, TW, and Debian 9. NUM behaves in 15.0x and TW as it has in all openSUSE versions since at least 10.2 if not older. In 42.3 on Kaby Lake (and Debian 9), I always have to turn NUM ON manually in the ttys (and in IceWM) regardless of the /etc/sysconfig/keyboard KBD_NUMLOCK='yes' or ='bios' setting. Sync between actual NUM state and NUM LED state does not seem to be at issue. I have many 42.3 installations. None have a problem maintaining BIOS and /etc/sysconfig NUM ON status, except my Kaby Lake. But, my Kaby Lake is my only hardware using UEFI firmware (or GPT). So, my experience could be either UEFI-related or Kaby Lake-related (late model hardware) and not related to /etc/sysconfig/keyboard/bug 1010880. Like 42.3, Debian with its 4.9 kernel also turns NUM off very early in boot. I've yet to discover how Debian ever decides whether to sync NUM state with BIOS or user intent, but like openSUSE on older hardware, NUM state is kept ON. Do other UEFI users have this problem with 42.3? Need or should I file a regression bug for this? The way I read 1010880, my problem is distinguishable, but I could be reading it wrong. -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] openSUSE Board Elections: Fraser_Bell
by Fraser_Bell 23 Mar '18

23 Mar '18

I am running for Election to the openSUSE Board. Many of you already know me, but here is some more information, including the reasons I want to join the Board. <https://en.opensuse.org/openSUSE:Board_election_2018_platform_Fraser_Bell> I hope some of you support me in this quest, but if not voting for me, make sure you at least participate in the election. Vote for someone you believe will do the job most like the way you want to see it done. You can find information about the election here: <https://en.opensuse.org/openSUSE:Board_election> -- -Gerry Makaro openSUSE Member openSUSE Forum Moderator openSUSE Contributor aka Fraser_Bell on the Forums, OBS, IRC, and mail at openSUSE.org Fraser-Bell on Github -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Webserver version for opensuse.org
by Meike Stone 22 Mar '18

22 Mar '18

Hello Suse, after accessing https://www.opensuse.org/sdfg I got a 404 with a Apache Version 2.2.12: ===================================================== # Not Found # # The requested URL /sdfg was not found on this server. # # Additionally, a 404 Not Found error was encountered while # trying to use an ErrorDocument to # handle the request. # # ________________________________ # Apache/2.2.12 (Linux/SUSE) Server at www.opensuse.org Port 80 ====================================================== Is this the real version or a fake? The version 2.2.12 was released on 2009/07/28 and the Support for version 2.2.x was dropped by Apache, EOL is reached. from apache.org: ===================================================== # Apache httpd 2.2 End-of-Life 2018-01-01 # # As previously announced, the Apache HTTP Server # Project has discontinued all development and patch # review of the 2.2.x series of releases. # # The Apache HTTP Server Project had long committed # to provide maintenance releases of the 2.2.x flavor # through June of 2017, # and to continue to publish some security source # code patches until December of 2017. The final # release 2.2.34 was published in July 2017, and no # further evaluation of security risks will be # published for 2.2.x releases. ===================================================== Kindly regards, Meike -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] Docker
by ellanios82 22 Mar '18

22 Mar '18

Hi Carlos , - if i understood , you keep Windows for several special programs that are important to you : Again , if i got the drift : perhaps one can put those special windows programs into a windows "Docker" whose Image can be run on Linux . & , again , if i got the drift : "Docker" is somewhat like a minature Virtual Machine , but compact , and using far less of ones 'puter's resources . - could this be handy , to preserve programs in their own 'container' where they are impervious to library-drift , and other old-age-program related problems ?? ........ regards -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 12

[opensuse] ssh known hosts.
by Carlos E. R. 22 Mar '18

22 Mar '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, I have an issue with this: cer@minas-tirith:~> ssh -X cer(a)Isengard.dyndns... Warning: Permanently added the ECDSA host key for IP address '[79.*.*.*]:port' to the list of known hosts. Last login: Wed Mar 21 03:08:36 2018 from 192.168.1.14 Have a lot of fun... cer@Isengard:~> This is what happens every time I log to my home server remotely, and it can be a different IP each time, so my known host list gets an increased number of no longer valid IP addresses. How can I avoid the address being stored "permanently"? Or perhaps I have to purge the addresses manually? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAlqyII4ACgkQja8UbcUWM1zH6gD/d4NcvT+R80tdmBu8TKhRNYTC 4tG9MZKQL4YSqeQbgl4A/jjLb7B0d3L0P2rkiHErvoYWQX+0I9sicKLG3g7qJqoW =vYIi -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 22

[opensuse] Leap LXD Images
by J.S. Evans 21 Mar '18

21 Mar '18

Hi, I was wondering who create the Leap 42.3 LXD images and if there is a GitHub for those images. I would like to create an image for Tumbleweed but so far my attempts aren't working very well. Jason -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] website certificate works with ff, opera and chromium, but not with curl, wget, w3m and konqueror.
by Per Jessen 20 Mar '18

20 Mar '18

A customer of ours recently renewed the ssl certificate (Digicert/Geotrust). Since then, accessing the site with curl, wget, w3m and konqueror causes a complaint "Unable to locally verify the issuer's authority". Firefox, Opera and Chromium have no problems. (all on Leap422). The site: https://www.elixseri.com/ On Leap15 - Firefox is fine, wget isn't. Even an older Firefox on openSUSE 13.1 works fine. -- Per Jessen, Zürich (0.1°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 8

[opensuse] Another Scanner Not Working
by Paul Groves 20 Mar '18

20 Mar '18

I just plugged in my Epson Perfection 3170 Photo scanner. This is the second scanner that doesn't 'Just work' in Linux. Two in one week! :-O I just can't believe it. It shows up in sane-find-scanner for root (not for my user) and does not show in scanimage -L or sudo scanimage -L sudo sane-find-scanner found USB scanner (vendor=0x04b8 [EPSON], product=0x0116 [EPSON Scanner]) at libusb:001:005 scanimage -L No scanners were identified. What gives? How can I get the scanner to show up in scanimage? Like I said in my last thread, I have no idea how scanning works on Linux so any and all help is greatly appreciated. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

14 27

[opensuse] error logrotate mariadb on 42.3
by Admin Beckspaced 19 Mar '18

19 Mar '18

Hello OpenSUSE users, since recently upgrading from 42.2 to 42.3 I do receive an error with logrotate on the mariadb config. 2018-03-14T00:00:01.845385+01:00 cx20-2 logrotate[22165]: error: 'Access denied for user 'root'@'localhost' (using password: NO)' 2018-03-14T00:00:01.846915+01:00 cx20-2 logrotate[22165]: the root acount is protected by password. 2018-03-14T00:00:01.847363+01:00 cx20-2 logrotate[22165]: See comments in /etc/logrotate.d/mariadb on how to fix this 2018-03-14T00:00:01.849623+01:00 cx20-2 logrotate[22165]: error: error running non-shared postrotate script for /var/log/mysql/mysqld.log of '/var/log/mysql/mysqld.log ' yes, I did create the file /root/.my.cnf with read only permissions 0600 for root only [mysqladmin] password = mysecretpassword user = root but it doesn't help ;( If I login via CLI all is fine. First I try without password which fails. Next with password and all is fine ;) cx20-2:~ # mysql -u root -h localhost ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO) cx20-2:~ # mysql -u root -h localhost -p mysql Enter password: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MariaDB monitor. Commands end with ; or \g. Your MariaDB connection id is 6685 Server version: 10.0.33-MariaDB SLE 12 SP1 package Copyright (c) 2000, 2017, Oracle, MariaDB Corporation Ab and others. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. MariaDB [mysql]> quit; Any idea on how to fix / debug this issue? Perhaps someone did have a similar experience while upgrading from 42.2 to 42.3? Thanks & greetings Becki -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] Knurpht's Board election platform
by Knurpht - Gertjan Lettink 19 Mar '18

19 Mar '18

Hi all, Posting intentionally on these lists, to reach as much of an audience as possible: https://en.opensuse.org/ openSUSE:Board_election_2018_platform_Knurpht -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team Linux user #548252 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 14

[opensuse] windows question
by George from the tribe 18 Mar '18

18 Mar '18

Since I know many of you are system administrators and have to know about Windows as well as linux, I thought I would ask this simple windows question. On my dell laptop which is dual boot, there is a partition with the label 'WINRETOOLS' that is about 450 mb in size. There is also a partition with the label 'Image' that is about 12 gb in size. They both have the ntfs file system. I have a bash procedure I have written for making daily/weekly backups of my hard drive, and I use rsync to clone my ext4 partitions. I use 'ntfsclone' to clone the windows partition, so that if my hard drive fails I can swap out the backup and be back up and running, complete with dual boot. I do use windows on occasion with this computer, so I want to keep the windows backup current. However, I haven't done anything to set up backing up windows images or anything like that. I haven't wanted to get too into the windows side of things which results in microsoft logging your life on their servers. But my question is, does windows automatically keep the 'WINRETOOLS' partition and/or the 'Image' partition updated when windows is being used? If so, I will need to clone those partitions also. Thanks in advance. -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 42.3 | Gnome 3.20 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 42.3 | Gnome 3.20 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] sudden problems with firefox address bar
by stakanov 18 Mar '18

18 Mar '18

This touches all user accounts, whether plugins present or not. You cannot open an address via the address bar. You can open all bookmarks without problems. You cannot search (and the search selection is shown empty) You can search on default search page of opensuse. What ever you get as result you can open it by clicking on it. Anybody else has the problem and what could be the reason? _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 21

Re: [opensuse] Connect to psSense - OpenVPN
by James Knott 17 Mar '18

17 Mar '18

On 03/17/2018 05:12 PM, Chris wrote: > On Sat, 7 Oct 2017 14:50:42 -0400 > James Knott wrote: > >> I got it going, but whenever I start the VPN in network manager, I'm >> prompted for the Password and Key Password, even though I had >> configured them to be saved. Any idea how to stop the prompts? > It's probably easier to use the native OpenVPN client instead of > network manager. Then, you can also store the password in a textfile. I > don't know if it's also possible to store the key password but you > should be able to remove the password from the certificate key. > > When I set up OpenVPN, I was able to get around that. IIRC, on the General configuration tab, I selected "All users may connect to this network". -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

Re: [opensuse] windows question
by George from the tribe 17 Mar '18

17 Mar '18

On 03/17/2018 05:53 PM, Wols Lists wrote: > On 17/03/18 08:12, George from the tribe wrote: >> >> But my question is, does windows automatically keep the 'WINRETOOLS' >> partition and/or the 'Image' partition updated when windows is being >> used? If so, I will need to clone those partitions also. > > Having re-imaged a couple of machines, I would guess not. The winretools > partition contains the programs needed to re-image or repair, I believe, > and the image partition contains the system image. When I've done a > "wipe and re-image" the machine has been set back to "as new", and I've > had to re-download and re-install all the updates. > > And this is almost certainly what ends up on the recovery DVD set, > should you make one ... > > Cheers, > Wol > Ok, thanks. I won't worry about copying those partitions. -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 42.3 | Gnome 3.20 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 42.3 | Gnome 3.20 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Re: [opensuse-factory] Phoronix has done some network tests windows vs a few distros (incl TW)
by nicholas cunliffe 17 Mar '18

17 Mar '18

to discuss sloppiness of tests (or at least an unwillingness to clarify test assumptions) (its a while ago, but i believe this is the outline). in 2016 he did comparisons of different distros, testing read write speed using a database. After pointing out in the comments that in fact opensuse, btrfs guides and (i think) the authors of the database recommend using nodatacow for such applications the comment was 'set upon' by michaels fanboys using lame, handy wavy arguments, saying the test had to be done 'out of the box' and that turning off nodatacow introduced 'issues of data integrity'. https://www.phoronix.com/scan.php?page=article&item=eoy16-ws-server&num=1 would i assume phoronix tests are authoritative without investigation? - not likely. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] vncviewer and fonts
by Roger Oberholtzer 16 Mar '18

16 Mar '18

I am trying to use vncviewer from a Leap 42.3 system to connect to a Windows display. I have done this in the past. Now I am trying from a Leap 42.3 install. I get this from the vcnviewer: Warning: Cannot convert string "-*-helvetica-bold-r-*-*-16-*-*-*-*-*-*-*" to type FontStruct Warning: Unable to load any usable ISO8859 font Warning: Unable to load any usable ISO8859 font Error: Aborting: no font found It does this after accepting the password. In fact, I have many fonts installed (it's a KDE desktop). I have seen this reported over 15 years ago. But I don't see much now. And the solutions were typically to install some fonts. These vnc RPMs are installed. The vncviewer is from tightvnc x11vnc-0.9.13-18.2.x86_64 libXvnc1-1.6.0-21.1.x86_64 xorg-x11-Xvnc-1.6.0-21.1.x86_64 tightvnc-1.3.10-123.10.x86_64 These font packages are installed: xorg-x11-fonts-core-7.6-34.16.noarch xorg-x11-fonts-7.6-34.16.noarch gnu-unifont-bitmap-fonts-20080123-88.3.noarch noto-sans-fonts-20151215-4.13.noarch google-noto-fonts-doc-20151215-4.13.noarch liberation-fonts-1.07.2-6.3.noarch hack-fonts-2.020-3.3.noarch ghostscript-fonts-std-9.06-29.5.noarch Other X applications seen to run (e.g., xterm). I'm not sure why vncviewer is unhappy. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 8

[opensuse] Scanner Setup
by Paul Groves 16 Mar '18

16 Mar '18

Hi, I have dug out my old scanner. A Tiny FU318D. The scanner powers up fine. It was last used with Windows 98SE in 2006 I have plugged it in and is does not show in SimpleScan scanimage -L does not find any scanners lsusb shows it as: Bus 001 Device 007: ID 0461:0340 Primax Electronics, Ltd Colorado 9600 Scanner This is the first scanner I have come across that doesn't 'Just work' in Linux. Does anyone know how I can go about diagnosing the problem and getting the scanner to work? I wouldn't know where to start on this one. Thanks Paul -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Is YAST able to configure and administrate a mailrelay?
by Jonathan Sélea 15 Mar '18

15 Mar '18

Hi, I am exploring the option to set up a mail relay with SuSE/SLES. I have always done it Debian before and now I wanted to try another approach (mainly because of YAST so other people admin it too) Is it possible to set up a mail relay that does DKIM (and possible ARC) signing with YAST only? Ofc there is alot of different domains that is going to use that relay. Let me know if I am unclear! Thanks!

4 5

[opensuse] Ethernet and onboot/oncable
by Roger Oberholtzer 15 Mar '18

15 Mar '18

The configuring Ethernet ports in openSUSE, it is possible to say when the port should be configured. This is the STARTMODE= value in the port configuration file. Has there been a deliberate change in the 'onboot' mode? In previous openSUSE releases, this would cause the port to be configured when the system is booted, independent of whether there is a cable attached. If one want to require that there be a cable, STARTMODE can bet set to 'oncable'. In Leap 42,3, it seems that when one selects On Boot in YAST, STARTMODE is set to 'auto'. If there is no cable attached, the port does not get an address. It acts like 'on cable connect'. I am not running Network Manager. The ports are managed in the traditional way (or whatever fills that role these days). The network and related services are all running before anyone logs in. This is a problem in systems that boot along with other hardware. If, say, the Leap machine starts it's network before some other system, the port on Leap will not get an address. This is bad. While plugging in cable (or the remote system turning on) will cause the port to get an address, services that use that port are not restarted. For example, dhcpd will ignore ports without an address - and it will never try again until you actively restart it. Is there any way to get the previous on boot functionality so that ports with fixed address are assigned them on boot, no matter what may or may not be connected to them? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 19

[opensuse] btrfs and deletion of large directory
by Josef Fortier 14 Mar '18

14 Mar '18

I've a server accumulating a lot of netflow data. The whole filesystem is btrfs. It's not yet full, but it's getting full enough that I've been removing some old netflow data directories. But even though the directories themselves are quite large, deleting them has no impact of reported disk usage, either at the OS level, or the level of the various btrfs filesystem commands. I've run the suse cron.weekly and cron.monthly btrfs jobs (scrub and balance). They do not help, with the same reported usage before and after jobs run. I've removed old snapshots. This also has no impact on reported usage. What sorts of trouble shooting steps would be next? Thanks. -- __________________________________________________________________________ Josef Fortier Systems Administrator fortier(a)augsburg.edu Phone: 612-330-1479 __________________________________________________________________________ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] DNSmasq problems
by Anton Aylward 14 Mar '18

14 Mar '18

What am I missing? I am using the 'additional hosts' mechanism of DNSMasq to block adverts Only DNSmasq doens't seem to be diing the job. I have the 'additional hosts' defined in the /etc/dnsmasq.conf # grep -C 2 addn /etc/dnsmasq.conf # or if you want it to read another file, as well as /etc/hosts, use # this. addn-hosts=/etc/dnsmasq.d/block.hosts.txt I have a goddamnawful advert from a site defined there, along with a lot of ther stuff # grep server-13-33-160-47.ord50.r.cloudfront.net /etc/dnsmasq.d/block.hosts.txt 127.0.0.1 server-13-33-160-47.ord50.r.cloudfront.net I restart dnsmasq and it confirms that it read that file # systemctl status dnsmasq.service * dnsmasq.service - DNS caching server. Loaded: loaded (/usr/lib/systemd/system/dnsmasq.service; enabled; vendor preset: disabled) Drop-In: /run/systemd/generator/dnsmasq.service.d `-50-insserv.conf-$named.conf Active: active (running) since Mon 2018-03-12 12:00:42 EDT; 1min 16s ago Process: 8002 ExecStartPre=/usr/sbin/dnsmasq --test (code=exited, status=0/SUCCESS) Main PID: 8005 (dnsmasq) Tasks: 1 (limit: 512) CGroup: /system.slice/dnsmasq.service `-8005 /usr/sbin/dnsmasq --log-async --enable-dbus --keep-in-foreground Mar 12 12:00:42 main.HOME.SystemI.ca systemd[1]: Started DNS caching server.. Mar 12 12:00:42 main.HOME.SystemI.ca dnsmasq[8005]: started, version 2.78-security-prerelease cachesize 2000 Mar 12 12:00:42 main.HOME.SystemI.ca dnsmasq[8005]: compile time options: IPv6 GNU-getopt no-DBus i18n no-I...tify Mar 12 12:00:42 main.HOME.SystemI.ca dnsmasq[8005]: DBus support enabled: connected to system bus Mar 12 12:00:42 main.HOME.SystemI.ca dnsmasq[8005]: asynchronous logging enabled, queue limit is 5 messages Mar 12 12:00:42 main.HOME.SystemI.ca dnsmasq[8005]: reading /etc/resolv.conf Mar 12 12:00:42 main.HOME.SystemI.ca dnsmasq[8005]: using nameserver 8.8.8.8#53 Mar 12 12:00:42 main.HOME.SystemI.ca dnsmasq[8005]: using nameserver 8.8.4.4#53 Mar 12 12:00:42 main.HOME.SystemI.ca dnsmasq[8005]: read /etc/hosts - 18 addresses Mar 12 12:00:42 main.HOME.SystemI.ca dnsmasq[8005]: read /etc/dnsmasq.d/block.hosts.txt - 24619 addresses But if I ping that site or visit a page that uses it, this doens't work as I expect. # ping server-13-33-160-47.ord50.r.cloudfront.net PING server-13-33-160-47.ord50.r.cloudfront.net (13.33.160.47) 56(84) bytes of data. 64 bytes from server-13-33-160-47.ord50.r.cloudfront.net (13.33.160.47): icmp_seq=1 ttl=246 time=23.4 ms 64 bytes from server-13-33-160-47.ord50.r.cloudfront.net (13.33.160.47): icmp_seq=2 ttl=246 time=32.0 ms 64 bytes from server-13-33-160-47.ord50.r.cloudfront.net (13.33.160.47): icmp_seq=3 ttl=246 time=22.8 ms 64 bytes from server-13-33-160-47.ord50.r.cloudfront.net (13.33.160.47): icmp_seq=4 ttl=246 time=32.4 ms 64 bytes from server-13-33-160-47.ord50.r.cloudfront.net (13.33.160.47): icmp_seq=5 ttl=246 time=30.2 ms How come DnsMasq isn't serving up 127.0.0.0 becuase it is using namesever 8.8.8.8? Well if I try putting 127.0.0.1 ahead of that in the /etc/resolv.conf I get Mar 12 12:15:09 main.HOME.SystemI.ca dnsmasq[8005]: ignoring nameserver 127.0.0.1 - local interface What am I missing? Is this caching problem? How do I flush cache? -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 46

[opensuse] list archive searching fubar
by Felix Miata 14 Mar '18

14 Mar '18

Does anyone know a way to search the mailing list archives where the search criteria get obeyed? Whenever I try to search by date range, first using the search box on e.g. https://lists.opensuse.org/opensuse-factory/ and then opening the advanced search link, the date range I provide is utterly disregarded. When I try to limit results to only one list, that too is utterly disregarded. Also, there's no option in the select list to search only the body. Yesterday or the day before there was a post I now want to follow up to, but I already deleted it when it arrived, and have no idea which thread or list it was on. Subject matter in body I seek is IIRC lack of current maintainer for opensuse.org. -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] text changes in libreoffice calc
by George from the tribe 11 Mar '18

11 Mar '18

I am trying to make a record of my partitions on various drives in a libreoffice calc spreadsheet. Whenever I start to type something like "/dev/sda1" into a cell, as soon as I hit the 2nd forward slash, the first forward slash disappears and the font of what I just typed switches to italics. It seems like some kind of autocorrect feature that should be easily disabled, but I can't find that keystroke sequence in the autocorrect listings, as there is nothing in there that indicates a change in font style. Anyone else ever notice this? -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 42.3 | Gnome 3.20 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 42.3 | Gnome 3.20 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 26

[opensuse] falkon replaces qupzilla
by Patrick Shanahan 10 Mar '18

10 Mar '18

jfyi: the lightweight web browser qupzilla has been replaced with falkon today. I copied ~/.cache/qupzilla to ~/.cache/falkon and ~/.config/qupzilla to ~/.config/falkon and drove on. have all my bookmarks and history seemingly intact and have noticed no problems. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Intention to run for Board
by Knurpht - Gertjan Lettink 09 Mar '18

09 Mar '18

Hi all, It's Board elections time again, and I'm glad to let know that I'll be running for a second term as a Board member. I'll post a bit more over the next weeks. Be well, best regards, -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team Linux user #548252 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Intention to run for board.
by Simon Lees 09 Mar '18

09 Mar '18

Hi All, For those of you who don't know me my name is Simon Lees and I am announcing my intention to run for the board. About me: As you can guess from my email address I now work for SUSE, I have done so for 2 years but I have been involved in the openSUSE community for around 7 years, mostly packaging the enlightenment desktop and a few other things. I am also part of the factory review team and have contributed to a bunch of other areas including patterns etc. Vision for the project: The reasons I started using openSUSE were 1. It treated all software particularly desktops equally, 2. The reasons I started contributing to openSUSE 7ish years back were 1. basically any contribution is welcome and 2. contributing is easy. I don't have any radical new plans for the vision of the project I think its in a really good place, mostly I just want to keep helping to make the reasons I joined the project reasons for other people to join and keep working on the project. Why Vote for me: * When I see something that needs fixing i'll probably just go and fix it. * I have decent people skills and am reasonably good at helping people work through problems. * I have a good technical understanding of may parts of the project. I might have a bit more to say in coming weeks, but if you have questions feel free to bug me via email or as simotek on the freenode irc network. Cheers -- Simon Lees (Simotek) http://simotek.net Emergency Update Team keybase.io/simotek SUSE Linux Adelaide Australia, UTC+10:30 GPG Fingerprint: 5B87 DB9D 88DC F606 E489 CEC5 0922 C246 02F0 014B

3 4

[opensuse] Dovecot weird error message
by Carlos E. R. 09 Mar '18

09 Mar '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I see now and then on the warning log these two messages: <2.3> 2018-03-09 02:56:00 Telcontar dovecot - - - master: Error: fstat(/var/lib/dovecot/instances.lock) failed: No such file or directory <2.3> 2018-03-09 02:56:00 Telcontar dovecot - - - master: Error: file_dotlock_open(/var/lib/dovecot/instances) failed: No such file or directory Both files do exist: Telcontar:~ # l /var/lib/dovecot/instances.lock /var/lib/dovecot/instances - -rw-r--r-- 1 root root 62 Jan 31 16:30 /var/lib/dovecot/instances - -rw-r--r-- 1 root root 0 Mar 9 02:56 /var/lib/dovecot/instances.lock Telcontar:~ # but one of them was created at the time of the error message. I checked with "aa-logprof" just in case apparmour would be blocking something, but no. Googling was not effective. This is Leap 42.3. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlqh/rsACgkQtTMYHG2NR9U4nwCdHMDFHWLqJFM3BH4x5OIIeSVm WvMAn1SAYRxtNsX2zFgoKWpJTSIaEQdD =xMkC -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] tmpfiles.d question
by Peter Suetterlin 07 Mar '18

07 Mar '18

Hi list, any experts for tmpfiles.d around? I have a laptop with intel ME that has a serial port. It is detected by linux (serial8250), but doesn't work because ME is disabled. Bad thing is, anything trying to access it runs into a 30s timeout :(( So I try to remove access to it using tmpfiles.d: woodstock:~ # cat /etc/tmpfiles.d/block_AMT_ttyS0.conf #Type Path Mode UID GID Age Argument z /dev/ttyS0 0600 - - - - However, after boot I still have woodstock:~ # l /dev/ttyS0 crw-rw---- 1 root dialout 4, 64 Mar 6 10:18 /dev/ttyS0 Is 'z' the wrong command? According to the manpage it should change modes of existing files/directories, and the serial module is loaded before systemd starts the tmpfiles scripts. Any ideas why it's not working? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 17

[opensuse] Grubby fingers in the boot straps
by Richmond 07 Mar '18

07 Mar '18

I seem to have broken grub. Or maybe it broke itself. I have tried to re-install it a few times with yast2 bootloader, but it is failing with "no menuentry" or I think that's what it says, it vanishes quickly. Here is the history: I installed Manjaro on a partition, /dev/sda2. Opensuse grub detects this, but it does not boot properly because Manjaro likes its own grub. So I installed Manjaro grub on /dev/sda2, and then I chainloaded it successfully from Opensuse grub. I then tried to make a chainloader menu entry in /etc/40_custom, but that didn't work so I thought nothing more of it. But today when I booted the system, opensuse grub failed with an error, then went straight to Manjaro grub. I tried to remove anything I added to /etc/40_custom, and I tried to re-install grub as I said. I also ran grub2-script-check but it does not report errors. How do I re-install grub with the default configuration? Can I do it from opensuse which I have booted from the Manjaro boot menu? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

Re: [opensuse] Moving to MariaDB Galera Cluster
by Eugen Block 07 Mar '18

07 Mar '18

Hi, have you been able to resolve your issue? I just stumbled upon your question as I need to install a new galera cluster. I have the advantage of having two new servers to install everything from scratch and just import the database dump if the cluster is up (at least that's my theory). > The main question is, witch packages do I have to remove/install to > be able to > configure the servers? > I already went to > https://software.opensuse.org/search?utf8=%E2%9C%93&q=galera&search_devel=f… > But I got confused and didn't realize what do I have to do. > > Do I need to remove MariaDB and install a brand new package? > Please, can someone show me the right packages I have to install? > Is there any documentation on how can I achieve this working? I found this guide [1] to migrate your database to Galera, but I didn't really go through the details. I just thought this could probably be of help for you. Considering the package question, I believe you need the 10.2.13 version of mariadb (so an upgrade) and additionally install mariadb-galera, you can find that in [2]. This creates a file in /etc/my.cnf.d/50-galera.cnf containing the required wsrep (and other) config options. The repo mentioned in [2] is not the official repo, I assume you could also use the official repo for leap-15 [3], it's the same version (10.2.13), but I don't know if that is an option and if this could lead to data inconsistencies or other problems. So be careful as I did not test it! Maybe someone with more experience can also shed some light on this. Regards, Eugen [1] http://galeracluster.com/documentation-webpages/migration.html [2] https://download.opensuse.org/repositories/server:/database/openSUSE_Leap_4… [3] https://download.opensuse.org/distribution/leap/15.0/repo/oss/ -- Eugen Block voice : +49-40-559 51 75 NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 Postfach 61 03 15 D-22423 Hamburg e-mail : eblock(a)nde.ag Vorsitzende des Aufsichtsrates: Angelika Mozdzen Sitz und Registergericht: Hamburg, HRB 90934 Vorstand: Jens-U. Mozdzen USt-IdNr. DE 814 013 983 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] 'new' Ethernet device names
by Roger Oberholtzer 06 Mar '18

06 Mar '18

Leap 42.3 provides the traditional Ethernet device names, like eth0. I am one of the strange guys who actually liked the new names that were hardware dependent. What is the best way to get those names on Leap 42.3? I have seen suggestions of a kernel command line option, of udev rules, and I bet a bet others. Is there a proper way to get those names with Leap 42.3? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 9

[opensuse] getting rid of all kde, gnome, lxde, ... programs and libs?
by mh＠mike.franken.de 05 Mar '18

05 Mar '18

Hi *, I have two machines running Leap 42.3. Both used to provide a graphical login for quite a long time, but they were turned into pure server machines, that don't need graphics any longer. What is the easiest way to get rid of all programs and libs belonging to kde, gnome, lxde, ...? I tried to uninstall the according patterns, but the list of packages to be uninstalled contains programs and libs that are vital for the system, too. Thx and bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 35

[opensuse] Permissions, systemd and automount
by Roger Oberholtzer 05 Mar '18

05 Mar '18

I am trying to use x-systemd.automount,noauto in /etc/fstab to set up automount of disks. For the most part it works fine. I am struggling with permissions. When the disk is, say, CIFS, I can add uid=roger to /etc/fstab and the files will belong to roger. This is because the file system itself does not have user ownership of individual files. Or at least the CISF driver makes it so. If I want this to work with ext4, this seems not to work as I would like. The problem is the top-level mount point. I do not seem to have any control over the permissions. So if a user inserts a disk, they cannot make any files in the top level of the disk. But that is what I need. When we were not using automount, the mount point's permissions were whatever the disk file had. They were not changed by the mount command. Autofs sets the permissions to rwx------. We really want to use autofs. If the disks are not inserted and they are in /etc/fstab, the system will not boot. Autofs solves this nicely. Any ideas on how to sort out permissions when systemd is managing autofs? I have googled, but all seems to discuss when you set up autofs yourself. I can do that. But we are trying to make this less complicated for the people who are managing the systems. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 61

[opensuse] resize root drive
by George from the tribe 04 Mar '18

04 Mar '18

I am on working on my laptop (#2 below, a dell XPS). It has a 500gb SSD which is partitioned for dual boot windows and opensuse. My root partition is almost completely full, and I am wondering what I can do about it to make more space. Here is the layout of the drive: tribetrekDell:/ # fdisk -l Disk /dev/sda: 447.1 GiB, 480103981056 bytes, 937703088 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 2C1BF30F-7D76-4D8E-A2CB-FD86115234B3 Device Start End Sectors Size Type /dev/sda1 2048 411647 409600 200M EFI System /dev/sda2 411648 444415 32768 16M Microsoft reserved /dev/sda3 444416 133564415 133120000 63.5G Microsoft basic data /dev/sda4 935960576 937701375 1740800 850M Windows recovery environment /dev/sda5 133564416 146245631 12681216 6G Linux swap /dev/sda6 146245632 193349631 47104000 22.5G Linux filesystem /dev/sda7 193349632 240453631 47104000 22.5G Linux filesystem /dev/sda8 240453632 935960575 695506944 331.7G Linux filesystem Partition table entries are not in disk order. I have 2 root drives, both 22.5G, for the purpose of when the time comes to upgrade, having the previous version backed up in order to be able to boot into my system if the upgrade fails, or I have some other kind of major failure. It has saved my back many times. So, I want to keep the 22.5G drives equally sized, and I don't want to reduce the "home" partition of 331.7G. I noticed that /dev/sda3 for windows is only using about 45G on it. Since I hardly ever use windows, I was thinking of trying to take 14G off of that drive, split it into 2 partitions, and somehow append those extra 7G to each of the root drives in order to give my root more room. Is that something that is even possible? Does anyone have better recommendations? Like splitting off some of the directories from my root drive that take up a lot of memory, and moving them to the new partitions, and then just symlinking to those partitions in order to continue running? I don't really know the best course of action here. Any help is greatly appreciated. -- George Box: 42.3 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 42.3 | Gnome 3.20 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 42.3 | Gnome 3.20 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

13 34

[opensuse] Display artifacts in Leap 42.3, on oldish laptop with Intel Video
by Carlos E. R. 04 Mar '18

04 Mar '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, I just upgraded my laptop to Leap 42.3 from 42.2 (offline upgrade aka dvd method), and I see artifacts on the display: areas that do not redraw, typically the menu area of a window. Some time whole windows that take seconds to redraw after switching the workarea. Gkrelmm has zones that are unreadable for long time, even if I put another window on top to try force a redraw (the CPU_0 panel, for instance, is gargabe). This instant, the whole Thunderbird went unreadable as I switched worskpace (I'm typing at Alpine). I'm not happy. minas-tirith:~ # hwinfo --display 08: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.378] Unique ID: _Znp.rCqQQ9NkN2D SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel Mobile 4 Series Chipset Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a42 "Mobile 4 Series Chipset Integrated Graphics Controller" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x3069 Revision: 0x07 Driver: "i915" Driver Modules: "i915" Memory Range: 0xd0000000-0xd03fffff (rw,non-prefetchable) Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable) I/O Ports: 0x4110-0x4117 (rw) IRQ: 26 (8103 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00002A42sv0000103Csd00003069bc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown 09: PCI 02.1: 0380 Display controller [Created at pci.378] Unique ID: ruGf.MfB3K+fOff2 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Intel Mobile 4 Series Chipset Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a43 "Mobile 4 Series Chipset Integrated Graphics Controller" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x3069 Revision: 0x07 Memory Range: 0xd2400000-0xd24fffff (rw,non-prefetchable) Module Alias: "pci:v00008086d00002A43sv0000103Csd00003069bc03sc80i00" Config Status: cfg=no, avail=yes, need=no, active=unknown Primary display adapter: #8 minas-tirith:~ # - -- Cheers Carlos E. R. (from 42.3 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iF4EAREIAAYFAlpsXCMACgkQja8UbcUWM1xD+QD/TzLVQx9WfOOBMy4HKxQ3ya04 FOCCzPEbYngd4FURenwA/iOLVYeptpKihhZB44TdOX9QafRVV5z35/v+2ZpvMUbI =20/r -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 40

[opensuse] Leap 42.3 / Firefox 58 can't play some youtube videos
by Andrei V 03 Mar '18

03 Mar '18

Hi ! I have continuous problem with Leap 42.3 / Firefox 58 can't play some youtube videos - "Your browser does not currently recognize any of the video formats available". Some effect with both SUSE builds and bins from Mozilla site. This tool https://www.youtube.com/html5 Detects H264 as unsupported format. Googling lead to this link https://support.mozilla.org/en-US/questions/1146825 which suggested this solution. https://forums.gentoo.org/viewtopic-p-7991240.html?sid=38ed7080bf31ac898795… However, I don't have any third-party packages which install its own copy of libavcodec.so.57 rpm -qf /usr/lib64/libavcodec.so.57 libavcodec57-3.4.2-10.1.x86_64 (from openSUSE:Leap:42.3:Update) Anyone have any idea how to solve this problem? Thanks in advance. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

Re: [opensuse] snapper
by Simon Becherer 03 Mar '18

03 Mar '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, > Because some dependency wants it back. You will have to taboo the package(s). how do i check who wants it back? simoN - -- www.becherer.de -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAEBAgAGBQJamaonAAoJEOuDxDCJWQG+eGAQAKSbtMP2D1p288GZM+GOu9gP dxvhVDCluMUEzk74Oj9SLkbQUTqOWq4WaOa9cSs8F5doTuPS9pGm9ZgYVi3qFnj5 4BWXuiWJxfsnrkjgD47trql3eygB94qH5OIENIa0ihZ53QKqXbWZAg1axtt73DGD cBr4g50zQKCRaBp0kY7l7Pq0GsqirlHED9D1ap5xhr4yuf94tHjwzRLXXs+LnW9X 9RGJr5yBmBmmihsvCH4FDR53bSWUvujH3QeLuX02FMYsm1WS0FwPXg5AKAKjb3X0 SLFfukr93a8xtr7ZLrFnZlOSH2nAHuiWHal17m3lLCv4ZsRperdBRaDXvyNyzdGS HkIUDfwO411F0hGBC32f9mBaah61aIjpS+2V/4Rtd3eczTlqMVxNsKLOtatO4KNU E5/9ysRlTqr/+CYZbmPQOqPt/iqNmxzSuUfItXeb73cPOrriBVlpL4D8sPOFevbh 2iiOkWE0moOC9ZREG6zUBugQLaSKYjsNagChGBsGfoT60Dbrzk9DxjsMgbh8+DUE mH3O6fK+9Gjpd8v5K9ci1vpOprSO8FKiEjgnK7P+Xl6ann+Zll9+tZoa9AAsCWnZ l8JbSme8oz3LT+/YHzaI+iTvf/trr+BwelZICUc6WI5EzSej5GpwyB8DFNyMMbdr gMFmLg9ab4M7AUU38oQ6 =uL5J -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] lxcc won't launch
by Ken Schneider - openSUSE 02 Mar '18

02 Mar '18

I cannot get lxcc to run and when launched from the CL I get the following: code: *********** ken@pc1:~> lxcc Traceback (most recent call last): File "/usr/bin/lxcc", line 157, in <module> app = Simple() File "/usr/bin/lxcc", line 141, in __init__ pixbuf=it.load_icon('gtk-stop',48,gtk.ICON_LOOKUP_FORCE_SVG) glib.GError: Icon 'gtk-stop' not present in theme ken@pc1:~> *********** I'm not sure how to solve this. I'd rather not go back to KDE. TW latest. -- Ken Schneider SuSe since Version 5.2, June 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5