July 2013 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] Question, re hdd size for kernel 2.6.38
by Patrick Shanahan 21 Jul '13

21 Jul '13

sorry for not correctly posting thread. Re-posted/separated from org thread. * Patrick Shanahan <paka(a)opensuse.org> [07-20-13 10:17]: > After noticing: > Jul 19 00:19:32 wahoo smartd[5815]: Device: /dev/sdc [SAT], FAILED SMART > self-check. BACK UP DATA NOW! > Jul 19 00:19:33 wahoo smartd[5815]: Device: /dev/sdc [SAT], Failed SMART > usage Attribute: 5 Reallocated_Sector_Ct. > > I made a complete backup: > wahoo:~ # pvdisplay > --- Physical volume --- > PV Name /dev/sdc > VG Name pictures > PV Size 698.64 GiB / not usable 888.00 KiB > Allocatable yes (but full) > PE Size 4.00 MiB > Total PE 178851 > Free PE 0 > Allocated PE 178851 > PV UUID > 0E32Pe-jLlc-TmaC-bh1B-FkTI-hclJ-5KjFK6 > > wahoo:~ #hwinfo --disk > 25: IDE 200.0: 10600 Disk > [Created at block.243] > UDI: /org/freedesktop/Hal/devices/storage_serial_ST3750640AS_5QD11H9W > Unique ID: _kuT.dg173GjeJJ4 > Parent ID: RE4e.L7HgSFR5QYC > SysFS ID: /class/block/sdc > SysFS BusID: 2:0:0:0 > SysFS Device Link: /devices/pci0000:00/0000:00:08.0/host2/target2:0:0/2:0:0:0 > Hardware Class: disk > Model: "ST3750640AS" > Device: "ST3750640AS" > Revision: "3.AA" > Serial ID: "5QD11H9W" > Driver: "sata_nv", "sd" > Driver Modules: "sata_nv" > Device File: /dev/sdc > Device Files: /dev/sdc, /dev/block/8:32, /dev/disk/by-id/ata-ST3750640AS_5QD11H9W, > /dev/disk/by-id/scsi-SATA_ST3750640AS_5QD11H9W, /d$ > Device Number: block 8:32-8:47 > BIOS id: 0x83 > Geometry (Logical): CHS 91201/255/63 > Size: 1465149168 sectors a 512 bytes > Geometry (BIOS EDD): CHS 1453521/16/63 > Size (BIOS EDD): 1465149168 sectors > Geometry (BIOS Legacy): CHS 1023/255/63 > Config Status: cfg=no, avail=yes, need=no, active=unknown > Attached to: #10 (IDE interface) > > > I am considering replacing the hdd with a Seagate SATA3 4TB. Will suse kernel > 2.6.38 recognize > 2TB. > > tks, > -- > (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 > http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 > http://en.opensuse.org openSUSE Community Member > Registered Linux User #207535 @ http://linuxcounter.net > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse+owner(a)opensuse.org -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 9

[opensuse] Kernel crash
by Bruce Ferrell 20 Jul '13

20 Jul '13

I've been getting messages like these in dmesg: [261717.690852] BUG: unable to handle kernel paging request at 0000000000001a90 [261717.690861] IP: [<ffffffff81113673>] page_waitqueue+0x63/0x80 [261717.690867] PGD 5c333e067 PUD 54e51b067 PMD 0 [261717.690870] Oops: 0000 [#1] PREEMPT SMP [261717.690874] Modules linked in: nfsd lockd nfs_acl auth_rpcgss sunrpc iptable_mangle ipt_MASQUERADE xt_nat iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_tcpudp vboxpci(O) xt_recent vboxnetadp(O) vboxnetflt(O) xt_conntrack nf_conntrack iptable_filter vboxdrv(O) ip_tables x_tables edd cpufreq_ conservative cpufreq_userspace mperf coretemp kvm_intel kvm snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel snd_hwdep snd_pcm ablk_helper cryptd snd_seq snd_timer snd_seq_device lrw usb_storage sr_mod cdrom firewire_ohci firewire_core sn d r8169 aes_x86_64 crc_itu_t shpchp soundcore iTCO_wdt sg snd_page_alloc iTCO_vendor_support xts gf128mul lpc_ich mei microcode i2c_i801 pci_hotplug mfd_core pcspkr i915 drm_kms_helper xhci_hcd drm i2c_algo_bit thermal fan video button processor thermal_sys scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh_emc scsi_d h [261717.690924] CPU 1 [261717.690927] Pid: 22609, comm: thunderbird-bin Tainted: G O 3.9.6-13.g8ead728-desktop #1 Shuttle Inc. SH67H/FH67H [261717.690931] RIP: 0010:[<ffffffff81113673>] [<ffffffff81113673>] page_waitqueue+0x63/0x80 [261717.690935] RSP: 0018:ffff88054e515c60 EFLAGS: 00010206 [261717.690937] RAX: 0000000000001440 RBX: ffffea0013cd94f0 RCX: 0000000000000040 [261717.690940] RDX: 0c7f9ac9c00d94f0 RSI: 0000000000000000 RDI: 0000000000000000 [261717.690942] RBP: 0000000000000002 R08: a780000000000000 R09: a8004f3653c00000 [261717.690944] R10: 57ff9ac9c00d94f0 R11: 0000000000000210 R12: ffffffffffffffff [261717.690947] R13: ffff8807ac9a65e8 R14: 0000000000000000 R15: 00000001ffffffff [261717.690949] FS: 00007f73e4c34740(0000) GS:ffff88081f240000(0000) knlGS:0000000000000000 [261717.690952] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [261717.690954] CR2: 0000000000001a90 CR3: 00000005c64c7000 CR4: 00000000000427e0 [261717.690957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [261717.690959] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [261717.690962] Process thunderbird-bin (pid: 22609, threadinfo ffff88054e514000, task ffff88064ea20640) [261717.690964] Stack: [261717.690966] ffffffff8111418d ffffea0013cd94f0 ffffffff8112211e 0000000e1e0bf2a7 [261717.690970] ffff8805429fa06e ffff88055bd39c40 0000000000000000 000000000000000e [261717.690973] 0000000000000000 ffffea0012cd9480 ffffea0012cd94b8 ffffea0013cd94f0 [261717.690977] Call Trace: [261717.690983] [<ffffffff8111418d>] unlock_page+0xd/0x20 [261717.690988] [<ffffffff8112211e>] truncate_inode_pages_range+0x13e/0x460 [261717.690993] [<ffffffff811fe5e5>] ext4_evict_inode+0x125/0x500 [261717.690998] [<ffffffff81193a07>] evict+0xa7/0x1a0 [261717.691002] [<ffffffff8118fb60>] d_kill+0xf0/0x140 [261717.691006] [<ffffffff81190281>] dput+0xd1/0x1a0 [261717.691010] [<ffffffff8118a5cd>] sys_renameat+0x32d/0x3c0 [261717.691015] [<ffffffff815dc76d>] system_call_fastpath+0x1a/0x1f [261717.691021] [<00007f73e28c81f7>] 0x7f73e28c81f6 [261717.691023] Code: 8d 04 c0 48 c1 e0 06 48 03 04 d5 e0 d8 aa 81 48 89 fa 48 c1 e2 36 48 c1 e7 3f 4c 01 d2 4c 29 c2 48 01 f2 48 29 ca b9 40 00 00 00 <2b> 88 50 06 00 00 48 01 d7 48 8b 80 40 06 00 00 48 d3 ef 48 8d [261717.691044] RIP [<ffffffff81113673>] page_waitqueue+0x63/0x80 [261717.691047] RSP <ffff88054e515c60> [261717.691049] CR2: 0000000000001a90 [261717.694373] ---[ end trace e30e33eae47e49c4 ]--- They don't fully crash the system, but I do have re-boot to get things back to mormal. I was getting them while running fsck on an ext3 filesystem with errors. I got fsck to complete by booting from a 32 bit rescue disk and running fsck from that. Any suggestions about what I may be looking at? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] inst_suseconfig
by Hans Witvliet 19 Jul '13

19 Jul '13

Hi all, during a minimalistic 12.3 installation, i get (after initial boot): "calling YaST mudule inst_suseconfig has failed etc etc etc" Any idea which RPM is missing? I tried the obvious ones: yast2-instserver and yast2-installation, but i still get the message.. hw -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] bash: how to get file extension
by lynn 19 Jul '13

19 Jul '13

Hi everyone How do I get the mp4 from this? video_id="Robin Thicke - Blurred Lines ft. T.I., Pharrell-yyDUC1LUXSU.mp4" I've tried these: ext=${video_title/*./} ext=${FILENAME##*.} ext=$(echo "$video_title" | sed 's/^.*\.//') The problem is the .'s I want to ignore all .'s until the final one (not just for this string). Thanks, L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 18

[opensuse] root owned files created under home user, programs get permission denied.
by Carlos E. R. 19 Jul '13

19 Jul '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I see this in the log: <4.3> 2013-07-19 22:14:33 Telcontar gnome-keyring-daemon 15780 - - unable to create file '/run/user/1000/dconf/user': Permission denied. dconf will not work properly. <4.3> 2013-07-19 22:15:40 Telcontar gnome-keyring-daemon 15780 - - last message repeated 2 times cer@Telcontar:~> tree -pug /run/user/1000/ /run/user/1000/ ├── [lrwxrwxrwx root root ] X11-display -> /tmp/.X11-unix/X0 ├── [drwx------ cer users ] dconf │ └── [-rw------- root root ] user <============ ├── [dr-x------ cer users ] gvfs ├── [drwx------ cer users ] gvfs-burn ├── [drwx------ cer users ] keyring-1OwyA0 │ ├── [srwxr-xr-x cer users ] control │ ├── [srwxr-xr-x cer users ] gpg │ ├── [srwxr-xr-x cer users ] pkcs11 │ └── [srwxr-xr-x cer users ] ssh └── [drwx------ cer users ] pulse ├── [srwxrwxrwx cer users ] dbus-socket ├── [srwxrwxrwx cer users ] native └── [-rw------- cer users ] pid 5 directories, 9 files cer@Telcontar:~> Is this a bug? - -- Cheers Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlHppR8ACgkQtTMYHG2NR9XWDwCaAjTKxqytEjkHvpXGWP+NBIqp acoAnAmTt++el3xMrgt/ghTrxKwXPOjy =ZIef -----END PGP SIGNATURE-----

1 0

[opensuse] Hopefully, a non-biased question.....................
by Duaine Hechler 19 Jul '13

19 Jul '13

I am currently working with a guy that is interested in switching to Linux from Winbloze. Since most of my experience is with KDE, I thought I would suggest openSUSE or Mint (with KDE). For a new user, what would be the "better" and/or more "stable" distro ? TIA, Duaine -- Duaine Hechler Piano, Player Piano, Pump Organ - Tuning, Servicing & Rebuilding (314) 838-5587 / dahechler(a)att.net / www.hechlerpianoandorgan.com Home & Business user of Linux - 13 years -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 9

[opensuse] How to get rid of (?) Titles when seeing several running apps
by Basil Chupin 19 Jul '13

19 Jul '13

Please see my tagline (below) for some details of my system. I apologise if you don't understand what I am asking in the Subject Heading as I don't know the correct terminology to use but this is what I am asking for help about. When I have several apps running and push the cursor into the topmost lefthand corner of the monitor screen I get all the apps displayed each in a mini "window". By clicking on any one that apps is then displayed in full screen and I can continue to use it. (There has to be a name for this situation but I don't know what KDE used to describe this.) When the apps are displayed in the mini "windows" each app has a TITLE - a black block with white text - displayed through the middle of "window" with the TITLE describing which app is being run in a "window". This TITLE is annoying for two reasons: the first is that I watch TV programs and the TITLE covers a portion of the middle of the TV screen, and secondly the TITLE is a rally useless because I, at least, know what apps are running at any one time. Does anybody know, please, how to eliminate this TITLE being superimposed on each and every "window"? BC -- Using openSUSE 12.3, KDE 4.10.5 & kernel 3.10.1-3 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] md stealing disks!
by Lew Wolfgang 18 Jul '13

18 Jul '13

Hi Folks, Here's an odd one. I pulled a "zypper dup" yesterday on a 12.3 x86-64 without any obvious issues. But today, I connected a brand new 3.5-in SATA disk to the system with one of those SATA/USB converters. I do this all the time and have never had any issues. So, I "tail -f /var/log/messages" to get the /dev/sdx id and then run fdisk /dev/sdf, in this case. I create one Linux partition using the whole disk. No problems noted. But now, when I run "mkfs.xfs /dev/sdf1" I get this error: "mkfs.xfs: cannot open /dev/sdf1: Device or resource busy" df doesn't show anything, and the Device Notifier is quiet. I then notice this in /var/log/messages: "[ 1122.179127] md: bind<sdf>" It looks like md is snatching the disk! But I'm not running md, to the best of my knowledge. A "ps ax |grep -i md" shows: 90 ? S< 0:00 [md] 95 ? SN 0:00 [ksmd] Is systemd quietly starting md which is then trying to be helpful? "kill -9 90" doesn't touch the process. "cat /proc/mdstat" shows: Personalities : md126 : inactive sdf[0] 976224256 blocks super external:/md127/0 md127 : inactive sdf[0](S) 538328 blocks super external:ddf unused devices: <none> This process of adding/formatting disks has worked for decades before yesterday's zypper dup. Are other folks seeing this? Regards, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 15

[opensuse] Ruby is not working
by Togan Muftuoglu 18 Jul '13

18 Jul '13

Hi, I have weird situation as I can't seem to figure out what is wrong with ruby This is a machine upgraded from 12.1 to 12.3 via zypper dup. ~ $ rpm -qa |grep ruby ruby-1.9.3-15.2.1.x86_64 ruby19-1.9.3.p392-1.9.1.x86_64 ~ $ ruby --version /usr/bin/ruby: error while loading shared libraries: libruby.so.1.8: cannot open shared object file: No such file or directory Any ideas what I am missing -- Togan o .o. o o_ o_ _o _o ,_o o_ <|> `|' (|) )' ),' ` |( ' (, ,( )| ' ( ) [ ] [ ] >\ / > < \ /< < \ / > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Adding a directory under /var/run
by Koenraad Lelong 18 Jul '13

18 Jul '13

Hi, I need to create a directory under /var/run. Since that is a tmpfs it disappears after a reboot when I create it manually. FWIW I use KVPNC to create a VPN. That supports my modem/router (FritBox). It has a some problems : - I need to give the root-password - racoon needs that /var/run/racoon directory - Stopping it seems not to work Maybe you can suggest another vpn-client that supports my Fritz-box ? Regards, Koenraad Lelong -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6