February 2002 - openSUSE Users - openSUSE Mailing Lists

RE: [SLE] ipop3d?
by Milnes Terry SSgt 52 LG/LGOP 11 Feb '02

11 Feb '02

I did this, but when I go to check for mail on the server it says Connection immediately dropped by server. I will go w/ qpopper. Hopefully there is some documentation on the web to get this working. Thanks! NeoFax -----Original Message----- From: zentara [mailto:zentara@gypsyfarm.com] Sent: Monday, February 11, 2002 1:52 PM Cc: suse-linux-e(a)suse.com Subject: Re: [SLE] ipop3d? On Mon, 11 Feb 2002 13:41:50 +0100 Milnes Terry SSgt 52 LG/LGOP <terry.milnes(a)SPANGDAHLEM.af.mil> wrote: > How do I get this to work? I got the imap portion working, but how do I get > the pop3 server to work? Or, would it be better to use qpopper? Any help > would be appreciated. Thanks! qpopper is probably better. To run pop3d, uncomment the line for it in /etc/inetd.conf and restart inetd. -- $|=1;while(1){print pack("h*",'75861647f302d4560275f6272797f3');sleep(1); for(1..16){for(8,32,8,7){print chr($_);}select(undef,undef,undef,.05);}} -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com

2 1

RE: [SLE] XFine?
by Milnes Terry SSgt 52 LG/LGOP 11 Feb '02

11 Feb '02

As stated this monitor is used by two pc's and I do not want to change the setting every time I change to the other pc. There has got to be a way to do this using some program, either xfine or something else. Thanks though! NeoFax -----Original Message----- From: Chin Kwie Joe AJST (Armand) [mailto:ajstchinkwiejoe@hr.nl] Sent: Monday, February 11, 2002 1:55 PM To: 'Milnes Terry SSgt 52 LG/LGOP'; SuSE Mail (E-mail) Subject: RE: [SLE] XFine? Xfime is for small changes only. Use the adjustment from your monitor. Regards, Armand #-----Oorspronkelijk bericht----- #Van: Milnes Terry SSgt 52 LG/LGOP #[mailto:terry.milnes@SPANGDAHLEM.af.mil] #Verzonden: maandag 11 februari 2002 13:45 #Aan: SuSE Mail (E-mail) #Onderwerp: [SLE] XFine? # # #I tried to setup X using the new Xfree86 4.2.0 servers and sax2 latest #by hand, but #now Xfine does not work and the screen is partially of the #monitor on the #right side. (I use this monitor for two PC's. So I cannot just Deze e-mail en de inhoud daarvan is vertrouwelijk. Indien dit bericht niet voor u bestemd is, verzoeken wij u deze e-mail direct aan ons te retourneren en daarna te vernietigen. In dit geval is het ook niet toegestaan deze e-mail en de inhoud daarvan te gebruiken, kopiëren of openbaar te maken aan derden. Holland Railconsult B.V. sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. This e-mail and its contents are confidential and may be legally privileged. If this e-mail is not intended for you, please contact us immediately by reply e-mail and destroy the e-mail. In this case, please do neither use, nor copy or disclose the e-mail and its contents to anyone. Holland Railconsult B.V. is neither liable for the proper and complete transmission of the information in this e-mail nor for any delay in its receipt.

1 0

RE: [SLE] XFine?
by Chin Kwie Joe AJST (Armand) 11 Feb '02

11 Feb '02

Xfime is for small changes only. Use the adjustment from your monitor. Regards, Armand #-----Oorspronkelijk bericht----- #Van: Milnes Terry SSgt 52 LG/LGOP #[mailto:terry.milnes@SPANGDAHLEM.af.mil] #Verzonden: maandag 11 februari 2002 13:45 #Aan: SuSE Mail (E-mail) #Onderwerp: [SLE] XFine? # # #I tried to setup X using the new Xfree86 4.2.0 servers and sax2 latest #by hand, but #now Xfine does not work and the screen is partially of the #monitor on the #right side. (I use this monitor for two PC's. So I cannot just Deze e-mail en de inhoud daarvan is vertrouwelijk. Indien dit bericht niet voor u bestemd is, verzoeken wij u deze e-mail direct aan ons te retourneren en daarna te vernietigen. In dit geval is het ook niet toegestaan deze e-mail en de inhoud daarvan te gebruiken, kopiëren of openbaar te maken aan derden. Holland Railconsult B.V. sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. This e-mail and its contents are confidential and may be legally privileged. If this e-mail is not intended for you, please contact us immediately by reply e-mail and destroy the e-mail. In this case, please do neither use, nor copy or disclose the e-mail and its contents to anyone. Holland Railconsult B.V. is neither liable for the proper and complete transmission of the information in this e-mail nor for any delay in its receipt.

1 0

RE: [SLE] EXT3?
by Chin Kwie Joe AJST (Armand) 11 Feb '02

11 Feb '02

I tried 7.3 once. During installation you need the option expert partitioning i beleive. There you can define mount points for your partitions and select the fs. I beleive you can also convert ext2 to ext3 as it only adds a jfs to it. Regards, Armand #-----Oorspronkelijk bericht----- #Van: Milnes Terry SSgt 52 LG/LGOP #[mailto:terry.milnes@SPANGDAHLEM.af.mil] #Verzonden: maandag 11 februari 2002 13:38 #Aan: SuSE Mail (E-mail) #Onderwerp: [SLE] EXT3? # # #How do I get ext3 to work in SuSE 7.3 kernel 2.4.16 upgrade? #Is there RPMs #out there that I need and do I do the rc.config change like #reiserfs? I.e. #initrd_module reiserfs,ext3. Currently I have an ext2 #directory as SuSE 7.3 #as default sets up ext2 instead of reiserfs or ext3.(After #spending so much #money to help develop reiserfs.) Any help would be appreciated. Thanks! # #NeoFax # #-- #To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com #For additional commands send e-mail to #suse-linux-e-help(a)suse.com #Also check the FAQ at http://www.suse.com/support/faq and the #archives at http://lists.suse.com # Deze e-mail en de inhoud daarvan is vertrouwelijk. Indien dit bericht niet voor u bestemd is, verzoeken wij u deze e-mail direct aan ons te retourneren en daarna te vernietigen. In dit geval is het ook niet toegestaan deze e-mail en de inhoud daarvan te gebruiken, kopiëren of openbaar te maken aan derden. Holland Railconsult B.V. sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. This e-mail and its contents are confidential and may be legally privileged. If this e-mail is not intended for you, please contact us immediately by reply e-mail and destroy the e-mail. In this case, please do neither use, nor copy or disclose the e-mail and its contents to anyone. Holland Railconsult B.V. is neither liable for the proper and complete transmission of the information in this e-mail nor for any delay in its receipt.

1 0

ipop3d?
by Milnes Terry SSgt 52 LG/LGOP 11 Feb '02

11 Feb '02

How do I get this to work? I got the imap portion working, but how do I get the pop3 server to work? Or, would it be better to use qpopper? Any help would be appreciated. Thanks! NeoFax

2 1

EXT3?
by Milnes Terry SSgt 52 LG/LGOP 11 Feb '02

11 Feb '02

How do I get ext3 to work in SuSE 7.3 kernel 2.4.16 upgrade? Is there RPMs out there that I need and do I do the rc.config change like reiserfs? I.e. initrd_module reiserfs,ext3. Currently I have an ext2 directory as SuSE 7.3 as default sets up ext2 instead of reiserfs or ext3.(After spending so much money to help develop reiserfs.) Any help would be appreciated. Thanks! NeoFax

1 0

Is it possible?
by Hugo GB 11 Feb '02

11 Feb '02

Hellow , What I want is to access my box at home from work , I suppose it´ll sound easy for you but I am quit new in communications and Linux. My motherboard(Asus) can weak-up my box when it detects a telephone call . The idea would be : 1) make a call from my work to weak up my box at home 2) wait 1 or 2 minutes to let Linux start 3) make a call again , now my system should hang up the call , and it should allow me to login And if it could be possible, it should be a secure conection. ... Am I asking for too much? Thanks. _________________________________________________________________ Descargue GRATUITAMENTE MSN Explorer en http://explorer.yupimsn.com/intl.asp.

2 1

RE: [SLE] No DRI on Matrox G400 with XFree4.2 . Needed Help
by Hugo GB 11 Feb '02

11 Feb '02

Yes I did , but I´ll check if everything is right with those packages. Thanks. >From: Jostein Berntsen <jostber(a)online.no> >To: "Hugo González Blanco" <hugogblanco(a)hotmail.com>, suse-linux-e ><suse-linux-e(a)suse.com> >Subject: RE: [SLE] No DRI on Matrox G400 with XFree4.2 . Needed Help >Date: Mon, 11 Feb 2002 12:19:50 +0100 > >Hi, > >Did you install these files too from the SuSE ftp site? > >ftp://ftp.suse.com/pub/suse/i386/supplementary/X/XFree86/XFree86-4.2.0-SuSE… >se71/DRI/ > >Jostein > > > >===== Original Message From "Hugo González Blanco" ><hugogblanco(a)hotmail.com> >===== > >Hellow, > > Some time ago I updated drivers from Matrox , and recently I´ve > >also updated XFree86 to version 4.2 . I don´t Know how , but I´ve > >lost DRI . > > > > I´ve followed all the instructions indicated in the README from > >Matrox,and everything seems to be right (modules needed loaded) , > >but in the .log appears "Direct Rendering disabled" > > > > I know drivers from Matrox are older than XFree86 4.2 , > >Is that the reason? > >Do anyone know if they are incompatibles? > > > >Thanks. > > > >Suse 7.1 > >Kernel 2.4.17 > >Kde 2.2.2 > > > > _________________________________________________________________ MSN Photos es la manera más sencilla de compartir e imprimir sus fotos: http://photos.latam.msn.com/Support/WorldWide.aspx

1 0

RE: [SLE] No DRI on Matrox G400 with XFree4.2 . Needed Help
by Jostein Berntsen 11 Feb '02

11 Feb '02

Hi, Did you install these files too from the SuSE ftp site? ftp://ftp.suse.com/pub/suse/i386/supplementary/X/XFree86/XFree86-4.2.0-SuSE… se71/DRI/ Jostein >===== Original Message From "Hugo González Blanco" <hugogblanco(a)hotmail.com> ===== >Hellow, > Some time ago I updated drivers from Matrox , and recently I´ve >also updated XFree86 to version 4.2 . I don´t Know how , but I´ve >lost DRI . > > I´ve followed all the instructions indicated in the README from >Matrox,and everything seems to be right (modules needed loaded) , >but in the .log appears "Direct Rendering disabled" > > I know drivers from Matrox are older than XFree86 4.2 , >Is that the reason? >Do anyone know if they are incompatibles? > >Thanks. > >Suse 7.1 >Kernel 2.4.17 >Kde 2.2.2 > > >_________________________________________________________________ >MSN Photos es la manera más sencilla de compartir e imprimir sus fotos: >http://photos.latam.msn.com/Support/WorldWide.aspx > > >-- >To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com >For additional commands send e-mail to suse-linux-e-help(a)suse.com >Also check the FAQ at http://www.suse.com/support/faq and the >archives at http://lists.suse.com

1 0

No DRI on Matrox G400 with XFree4.2 . Needed Help
by Hugo González Blanco 11 Feb '02

11 Feb '02

Hellow, Some time ago I updated drivers from Matrox , and recently I´ve also updated XFree86 to version 4.2 . I don´t Know how , but I´ve lost DRI . I´ve followed all the instructions indicated in the README from Matrox,and everything seems to be right (modules needed loaded) , but in the .log appears "Direct Rendering disabled" I know drivers from Matrox are older than XFree86 4.2 , Is that the reason? Do anyone know if they are incompatibles? Thanks. Suse 7.1 Kernel 2.4.17 Kde 2.2.2 _________________________________________________________________ MSN Photos es la manera más sencilla de compartir e imprimir sus fotos: http://photos.latam.msn.com/Support/WorldWide.aspx

1 0