- openSUSE Users

[opensuse] Cannot install Leap-15.1 on HP laptop
by Wolfgang Mueller 13 Nov '19

13 Nov '19

Today I tried to install Leap-15.1 on my new HP Pavilion Gaming Laptop 15-cx0112ng, but in vain. (Despite its name, I have no intention to use the laptop for games.) After inserting a bootable USB stick made from openSUSE-Leap-15.1-NET-x86_64.iso, I switched on the laptop and selected "Installation". This was the system's response: - Loading kernel - Loading initial ramdisk ... ... ... - Loading base drivers...ok - Starting hardware detection... But then an "ok" never appeared. Three overlapping green bars slowly grew from the left to the right for showing the hardware detection's progress. But after their arrival at the right-hand end, nothing happened any more. I waited one more hour, but in vain. I repeated this attempt of installation twice, loosing a lot of time, but without obtaining a different result. Unfortunately the laptop has no CD/DVD drive. So, there is no alternative to the installation with a bootable USB stick. Any help is welcome! Thanks in advance, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] wireless intermittent
by Dave Howorth 13 Nov '19

13 Nov '19

I'm a complete noob when it comes to wireless! I just turned wireless on on my openSUSE PC (Leap 15.0) in order to be able to control a TP-Link HS110 smart plug. But the wireless seems to be flaky on the PC and I have no idea why. I set it up in YaST - I use Wicked - and it seemed to work, then it stopped, then it worked, then it didn't etc. YaST now says: RTL8821AE 802.11ac PCIe Wireless Network Adapter (Not connected) MAC : 80:a5:89:34:b8:27 BusID : 0000:03:00.0 Device Name: wlan0 Started automatically at boot IP address assigned using DHCP but on my router's network management page I can see an IP address for my PC's WLAN interface (it's on a different net to the wired LAN) and part of the time it indicates a connection and part not. When it does the signal strength is -73 dBm. Is it telling me there's an actual connection problem (needs a better antenna) or is there some other possibility? How can I tell for sure? Oh there's a bunch of stuff in the log that probably helps if I knew what it meant: 2019-11-09T17:33:48.960206+00:00 acer-suse kernel: [9051579.222125] wlan0: Connection to AP 9a:9b:cb:9d:ab:52 lost 2019-11-09T17:33:52.240230+00:00 acer-suse kernel: [9051582.502761] wlan0: authenticate with 9a:9b:cb:9d:ab:52 2019-11-09T17:33:52.240242+00:00 acer-suse kernel: [9051582.503188] wlan0: send auth to 9a:9b:cb:9d:ab:52 (try 1/3) 2019-11-09T17:33:52.244205+00:00 acer-suse kernel: [9051582.509073] wlan0: authenticated 2019-11-09T17:33:52.244217+00:00 acer-suse kernel: [9051582.509992] wlan0: associate with 9a:9b:cb:9d:ab:52 (try 1/3) 2019-11-09T17:33:52.250061+00:00 acer-suse kernel: [9051582.515266] wlan0: RX AssocResp from 9a:9b:cb:9d:ab:52 (capab=0x1431 status=0 aid=6) 2019-11-09T17:33:52.250072+00:00 acer-suse kernel: [9051582.515519] wlan0: associated 2019-11-09T17:33:52.276592+00:00 acer-suse wickedd-dhcp4[1406]: wlan0: Request to acquire DHCPv4 lease with UUID 5fdb3c5d-1de5-0b00-a505-00000d000000 2019-11-09T17:33:55.580226+00:00 acer-suse kernel: [9051585.842867] wlan0: deauthenticated from 9a:9b:cb:9d:ab:52 (Reason: 34=DISASSOC_LOW_ACK) etc etc -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 33

Re: [opensuse] TW : DOSEMU will not start : LOWRAM mmap: Invalid argument
by ellanios82 13 Nov '19

13 Nov '19

On 11/11/19 8:00 PM, Simon Becherer wrote: > Only another suggestion, > > have you tried dosemu with a new user? > (if there would be some conf files soemwhere at user, > they would not be overwritten if you uninstall and install > again) > and/or check if there are some conf files in etc or somewhere else. > check in yast the filelist of dosbox for locations where it could be > (man could help also) > > i have only installed dosbox here, an it is running at tumbleweed 20191011 > > simoN > - have made a new user : as new user , dosemu still refuses to start . . . thus , can not be a 'home' directory config. file that prevents dosemu from start - will continue to poke around in /etc & elsewhere , searching for cause ..... many thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Certbot packages missing in OpenSuSE 15.1?
by Marc Chamberlin 13 Nov '19

13 Nov '19

Any idea what happened to the certbot and certbot-doc packages for OpenSuSE Leap 15.1? YaST is not showing these packages when I do a search for them... I will try and install these from the 15.0 repository but curious as to why they are missing in 15.1? Marc Chamberlin -- --... ...-- .----. ... -.. . .-- .- --... .--. -..- .-- -- .- .-. -.-. *Computers: the final frontier. These are the voyages of the user Marc. His mission: to explore strange new hardware. To seek out new software and new applications. To boldly go where no Marc has gone before! * -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[opensuse] TW : DOSEMU will not start : LOWRAM mmap: Invalid argument
by ellanios82 12 Nov '19

12 Nov '19

TW : - after this morning's "zypper dup" , dosemu refuses to start , and leaves error message: /usr/bin/dosemu LOWRAM mmap: Invalid argument ..... - any ideas please how to fix thanks .... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 13

[opensuse] Linux desktop and enterprise virus and such security
by Roger Oberholtzer 11 Nov '19

11 Nov '19

I have been trying to get my openSUSE desktops to play nice in our company's increasingly draconian security system. Every time I think I have made progress, there is another obstacle. Case in point. Our company has decided that Cisco will be the security provider. This includes using Cisco routers and Cisco software. In software, they are using Cicso's ICE, Umbrella, and AMP. I have been working with IT to see how our openSUSE desktops can play along with this. Things looked hopeful. Until they provided me with the AMP package. It is a RPM designed for use on Red Hat systems. Of course, I had a peek around to see what was really Red Hat specific. With a hope that it was standard and could be run on openSUSE. So close. But there were two obstacles: 1. It likes to keep the virus database up-to-date. That is, of course, needed. Unfortunately, it uses a very old RPM version/library to manage installed packages. That version is not compatible with the newer version openSUSE uses. I think it could be possible to get around that. Not sure. But maybe. 2. It installs some drivers. This requires that the drivers match the operating system version. AMP only supports a very old kernel (3.10.0 in RHEL 7, which Red Hat seems to patch with security fixes). This is unfortunate. And it need not be done this way (NVIDIA also installs drivers - but their method supports more OS versions by install-time linking of modules for the current kernel). This is the show stopper. I see no way to get around this incompatibility. Also RHEL is not really a desktop release. It was originally released in Oct of 2015. I have no interest in working in an old desktop. I guess I don't have a real question. Other than why Linux is still being marginalized by major companies? Surely I'm not the only user in a corporate environment where the security tools are mandated company-wide. It's not enough to claim that you have installed something at least equivalent. They only trust what they have selected. AMP, as it turns out, seems to use ClamAV. But it adds an interface that allows corporate monitoring that all is working as expected. With almost 40000 people, I cannot blame the security guys for wanting this kind of information. I guess it would take convincing from companies like SUSE (or a consortium of Linux companies working as a single entity) to get Cisco to consider proper Linux desktop support (maintained by Cisco in their own OBS environment to allow packages for multiple distros?). The humorous thing is that with Red Hat's acquisition by IBM, I think IBM's security stuff will be the preferred solution for Red Hat users. Cisco will surely see a decrease in Red Hat sales. And from that decide that Linux is not worth the effort. Some days I just feel too old for all this... -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 9

[opensuse] openSUSE Project Name Change voted down 225 - 42
by David C. Rankin 11 Nov '19

11 Nov '19

Democracy works! (at least here -- Thank God) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] 15.0 kernel after zypper dup from 42.3 has flaky usb-controller problems.
by David C. Rankin 11 Nov '19

11 Nov '19

All, I've watched this for the past couple of days since I updated to 15.0 from 42.3 with zypper dup. My usb controller has lost its mind and will just disconnect the mouse randomly -- then sometimes is reconnects moments later.... It's totally bizarre watching the mouse turn off, then suddenly turn back on (or other times require a manual disconnect and plug back in), e.g. below the mouse disconnects and then reconnects twice within 17 minutes of each other?? Nov 08 01:37:26 wizard kernel: usb 2-2: USB disconnect, device number 14 Nov 08 01:37:27 wizard kernel: usb 2-2: new low-speed USB device number 15 using xhci_hcd Nov 08 01:37:27 wizard kernel: usb 2-2: New USB device found, idVendor=045e, idProduct=0040 Nov 08 01:37:27 wizard kernel: usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Nov 08 01:37:27 wizard kernel: usb 2-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) Nov 08 01:37:27 wizard kernel: usb 2-2: Manufacturer: Microsoft Nov 08 01:37:27 wizard kernel: input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb2/2-2/2-2:1.0/0003:045E:0040.000E/input/input37 Nov 08 01:37:27 wizard kernel: hid-generic 0003:045E:0040.000E: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:26:00.0-2/input0 Nov 08 01:37:27 wizard mtp-probe[22767]: checking bus 2, device 15: "/sys/devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb2/2-2" Nov 08 01:37:27 wizard mtp-probe[22767]: bus: 2, device: 15 was not an MTP device Nov 08 01:54:25 wizard kernel: usb 2-2: USB disconnect, device number 15 Nov 08 01:54:26 wizard kernel: usb 2-2: new low-speed USB device number 16 using xhci_hcd Nov 08 01:54:26 wizard kernel: usb 2-2: New USB device found, idVendor=045e, idProduct=0040 Nov 08 01:54:26 wizard kernel: usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Nov 08 01:54:26 wizard kernel: usb 2-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) Nov 08 01:54:26 wizard kernel: usb 2-2: Manufacturer: Microsoft Nov 08 01:54:26 wizard mtp-probe[22946]: checking bus 2, device 16: "/sys/devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb2/2-2" Nov 08 01:54:26 wizard kernel: input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb2/2-2/2-2:1.0/0003:045E:0040.000F/input/input38 Nov 08 01:54:26 wizard kernel: hid-generic 0003:045E:0040.000F: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:26:00.0-2/input0 Nov 08 01:54:26 wizard mtp-probe[22946]: bus: 2, device: 16 was not an MTP device With 42.3 same box, same mouse, same port, this mouse would stay connected for weeks at a time without a hiccup. Within 30 minutes of upgrade to 15.0 via zypper dup, the mouse was doing tricks... Those are the complete log entries above. There is nothing in the journal between: Nov 08 01:37:27 wizard mtp-probe[22767]: bus: 2, device: 15 was not an MTP device Nov 08 01:54:25 wizard kernel: usb 2-2: USB disconnect, device number 15 (I just put a blank line in between to show the two separate events) The last journal entry before the 1:37.26 disconnect above was 7-minutes prior with: Nov 08 01:30:11 wizard systemd[1]: Started Backup RPM database. (definitely not related) Any ideas what to check? Anything that could have been on in 42.3 that now has a conflict with the 15.0 packages? ModemManager? upower? wicked? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 22

[opensuse] 15.0 Font Selection? What are teh defaults supposed to be?
by David C. Rankin 11 Nov '19

11 Nov '19

All, Among other changes from 42.3 to 15.0 was freetype version and default font selection. It appears there is some scheme that is choosing the first-available true-type for fc-match? What should the defaults be for: fc-match sans-serif fc-match serif fc-match monospace ?? (I get windows fonts for some strange reason and Yast->Fonts is using the defaults (no preferred families set)) Patching freetype-2.9 restored excellent lcdfilter rendering, so no complaints there, but what fonts should be the defaults? (It is driving FF nuts and I can't seem to hit on the right font to make things look like they did in 42.3) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Thunderbird fails to GPG sign S/MIME messages
by Carlos E. R. 10 Nov '19

10 Nov '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I suddenly have a problem signing messages on Thunderbird. It pops a message box that says: unable to (save or send) You specified that this message should be digitally signed, but the application either failed to find the signing certificate specified in your Mail & Newsgroup Account Settings, or the certificate has expired which is not true. However, I noticed that if in account settings, where it says: If both, Enigmail and S/MIME encryption are possible, then (*)Prefer S/MIME ( )Prefer Enigmail(OpenPGP) it fails with S/MIME and works with OpenPGP. - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXbLXNxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVx44AoIE9H+5EChAbz9WhwvPu OZGVYwoJAJ4onLFwft0Sz3WQ/obugiqct6gpmg== =3IBI -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 2

Re: [opensuse] Firefox throwing network wobblies
by stakanov 10 Nov '19

10 Nov '19

In data domenica 10 novembre 2019 11:06:38 CET, hai scritto: > In data sabato 9 novembre 2019 21:33:48 CET, gumb ha scritto: > > On 07/11/2019 19:52, stakanov wrote: > > > I experienced a problem like that recently, but a start of a new tab > > > with > > > loading data from any page fixes it. My wlan is also no so stable as > > > before > > > (an usb dongle: ASUSTek Computer, Inc. N10 Nano 802.11n Network Adapter > > > [Realtek RTL8192CU]) however I thought it would be related with my > > > provider > > > and with the fact that maybe the fritzbox I am using has precise dns > > > providers set. > > > It would be nice to know if you changed the settings for dns in > > > about:config Also if you are using a particular DNS provider as some > > > have > > > issues from time to time. > > > You should also make sure to load FF without any extension. I had an > > > issue > > > with an extension for anonymization. > > > I experience since some weeks severe slow downs during page loading and > > > very often after this, a breakage for disconnect of wlan. > > > Did you look at journalctl or dmesg to see if there are wlan problems? > > > I could also be that the firmware of the wlan makes trouble. Which > > > chipset > > > do you use for wlan? > > > > I received an off-list reply with a link to an unresolved bug that seems > > > > likely to be the same issue: > > > Hi there > > > > > > You probably experience an old bug: > > > > > > https://bugzilla.opensuse.org/show_bug.cgi?id=1108163 > > > > > > Since there has not been any progress so far, it would be nice if you > > > could add your experience. > > > > > > Regards > > > > > > Frank > > > > I'll hold back a little before adding to the bug because I'm still not > > back up and running permanently on that machine so can't test it in any > > greater depth. > > > > I've not changed DNS settings. As far as I'm aware my DNS provider is my > > French ISP, one of the country's largest. They may not be the best, I've > > seen one or two occasions that DNS has gone down, but the workaround for > > the behaviour I'm seeing is reproducible just by restarting the browser > > normally, so it's unlikely to be a DNS issue. I've not checked logs or > > tried disabling extensions. Might look into that when I'm on the machine > > again full-time. > > > > The wireless is Intel AC 9260. Prior to the hard drive failure, whilst I > > didn't have this particular issue, there were a couple of other things. > > After I bought a cheap-ish USB dock with ethernet, the wired connection > > through there crapped out two or three times in a week. And some > > annoying page-caching quirk has started developing on Firefox in recent > > months, whereby it keeps pulling an out-of-date cached version of a page > > despite me having refreshed and updated it many times. But I'm seeing > > that on other systems running other OS's too. > > > > gumb > > Oh, I deactivated caching (as I think it is of no use for me). So I cannot > ad on that specific aspect. > But there must be an issue on the lates kernel updates too. I have a Lenovo > X201 and as the old wlan card was not viable with the kernel any more I did > get an ASUSTek Computer, Inc. N10 Nano 802.11n > This was working for a while flawlessly but since a month I am getting > sudden wlan connection drops without any apparent reason. Sometimes I get > in the logs that the adapter received a "disconnect" command (which is an > open broadcom DOS) so it may be a neighbor kid does experiment with hacking > on surrounding devices. But today again it "just drops". What I see in FF > (which is when it happens all the time) it takes a lifetime to load a > page...and then nothing. When you go then on the user that is handling the > connections (a separate account on my setup) then you see that the system > did drop the wlan. I would suspect some wrong energysaving command or an > issue with dns but I am not sure as I did not find pertinent really errors > on dmesg or journalctl about it. > > Just a note: a but of 2018/12 is recent for opensuse speed. I had much > worse. At least it is confirmed, that means somebody did look on it. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Firefox throwing network wobblies
by gumb 09 Nov '19

09 Nov '19

Leap 15.1. FF 68.1.0esr from the update repo. Firefox has started behaving rather dumb with regards to the available Internet connection. This is on my laptop, so if I haven't plugged in the ethernet cable, and since I don't have any wifi connection set to connect automatically, I'll open Firefox and most pinned tabs produce server not found errors, as would be expected. But then I connect the wifi and try refreshing the tabs, and it fails to recognize there is now a connection. I have to close and reopen the browser to get it to connect. Sometimes the behaviour is more weird and esoteric. I'll be watching a YouTube video in one tab with a wifi connection active. The video will continue streaming to the end and I can continue to navigate within that tab, but all the other tabs have given up and won't search for the network. A restart is again required. I suspect this may be a missing configuration somewhere in my user home directory, because this is following on from the problem I had on this system with a defunct hard drive. I kept the root configuration but replaced the disk that had /home on it, then copied the skeleton to each user home. Though I'm in the process of copying bits and bobs of data over from backups, I'm not copying an entire /home backup and have started a new profile in Firefox. It's possible there's some network configuration in my home directory which was lost and isn't hence informing Firefox correctly of the current network state. I can't be sure yet if other applications are doing the same because I've not yet really started using any others to any great degree. Firefox had no such problem switching between wired and wireless networks before the hard disk failure. Network Manager is running and configured via the Plasma nm applet. All the network entries were retained somewhere in root so I didn't need to redo them under the new user home. But is there another missing network config file that ought to be in my home directory? gumb -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Strange message from log, would like to understand what it actually says: quoted printable codec lies about it's ....
by stakanov 09 Nov '19

09 Nov '19

kontact [3814] quoted printable lies about it's mEncodedSizeFor () Which means? An error of the program? And why does it appear in the logs of the machine? Actually on F10 terminal. No, I am not worried at all, but curious what the message does say. Quoted printable: could it be abused by some spammer to try to place malware or to perform else? _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] How can I force a firmware to be reloaded after every suspend to ram or to disc
by stakanov 08 Nov '19

08 Nov '19

Rational: Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Express card to USB3.0 Works well from the start but after suspend to RAM does not wake up: Normal: nov 08 16:58:32 roadrunner.suse kernel: hub 3-0:1.0: 4 ports detected nov 08 16:58:32 roadrunner.suse kernel: hub 3-0:1.0: USB hub found nov 08 16:58:32 roadrunner.suse kernel: usb usb3: SerialNumber: 0000:05:00.0 nov 08 16:58:32 roadrunner.suse kernel: usb usb3: Manufacturer: Linux 4.12.14- lp151.28.25-default xhci-hcd nov 08 16:58:32 roadrunner.suse kernel: usb usb3: Product: xHCI Host Controller nov 08 16:58:32 roadrunner.suse kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 nov 08 16:58:32 roadrunner.suse kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 nov 08 16:58:32 roadrunner.suse kernel: usb usb3: We don't know the algorithms for LPM for this host, disabling > nov 08 16:58:32 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 nov 08 16:58:32 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: xHCI Host Controller nov 08 16:58:32 roadrunner.suse kernel: hub 2-0:1.0: 4 ports detected nov 08 16:58:32 roadrunner.suse kernel: hub 2-0:1.0: USB hub found nov 08 16:58:32 roadrunner.suse kernel: usb usb2: SerialNumber: 0000:05:00.0 nov 08 16:58:32 roadrunner.suse kernel: usb usb2: Manufacturer: Linux 4.12.14- lp151.28.25-default xhci-hcd nov 08 16:58:32 roadrunner.suse kernel: usb usb2: Product: xHCI Host Controller nov 08 16:58:32 roadrunner.suse kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 nov 08 16:58:32 roadrunner.suse kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 nov 08 16:58:32 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: hcc params 0x200071e1 hci version 0x100 quirks 0x> nov 08 16:58:32 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2 nov 08 16:58:32 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: xHCI Host Controller nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: enabling device (0000 -> 0002) nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: BAR 4: assigned [mem 0xf0011000-0xf0011fff 64bit] nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: BAR 2: assigned [mem 0xf0010000-0xf0010fff 64bit] nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff 64bit] nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: PME# supported from D0 D1 D3hot nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: supports D1 nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit] nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] nov 08 16:58:32 roadrunner.suse kernel: pci 0000:05:00.0: [1b73:1100] type 00 class 0x0c0330 this is how it is when it works. And this happens after Suspend: nov 08 16:57:51 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: USB bus 2 deregistered nov 08 16:57:51 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: Host not accessible, reset failed. nov 08 16:57:51 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: Host halt failed, -19 nov 08 16:57:51 roadrunner.suse kernel: usb usb2: USB disconnect, device number 1 nov 08 16:57:51 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: remove, state 4 nov 08 16:57:51 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead nov 08 16:57:51 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: USB bus 3 deregistered nov 08 16:57:51 roadrunner.suse kernel: usb usb3: USB disconnect, device number 1 nov 08 16:57:51 roadrunner.suse kernel: xhci_hcd 0000:05:00.0: remove, state 4 It is possible to reregister it when you pull it out for 30 seconds. Short off in does not do the trick. So it is the controller that does not capture the wake up call (or does not load the firmware). Any suggestion? _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] usage of gpm in terminal (TW)
by stakanov 05 Nov '19

05 Nov '19

The program gpm should allow me to use the mouse to copy and paste in a console session (ttyn to be clear, eg. tty2). When I try to use it in TW I am told that it is in sbin and requires sudo. Which I looked up and this has been explained for security reasons. The man page speaks about the x-server but does not mention if the x-server has to be started manually. But if I am running on tty7 a KDE desktop session, shouldn't the xserver already be running? I tried with sudo and with su - but both go through without complain and ... nothing happens. (sudo gmp) I tried to use the mouse after the command but this does not seem to work. Do I think wrongly or is there a way to use gpm in specific way to achieve this in TW? (This is mainly for learning reasons, since a text, that I am using currently, mentions the program in this usage). Thank you. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 7

[opensuse] Leap 15.0 after zypper dup from 42.3 - usb mouse just dies?
by David C. Rankin 05 Nov '19

05 Nov '19

All, Has anyone had a problem with a usb mouse just quitting? I have had this happen twice in the past hour. It's a simple standard MS 3-button mouse. Suddenly the lights just go out and it's dead. (touchpad still works) Restart and the mouse is back. This has never happened before. Has anybody seen anything similar? Checking the log I see: Nov 04 20:37:07 wizard kernel: usb 2-2: USB disconnect, device number 2 Nov 04 20:37:07 wizard kernel: usb 2-2: new low-speed USB device number 3 using xhci_hcd Nov 04 20:37:08 wizard kernel: usb 2-2: device descriptor read/64, error -71 Nov 04 20:37:08 wizard kernel: usb 2-2: device descriptor read/64, error -71 Nov 04 20:37:08 wizard kernel: usb 2-2: new low-speed USB device number 4 using xhci_hcd Nov 04 20:37:08 wizard kernel: usb 2-2: device descriptor read/64, error -71 Nov 04 20:37:08 wizard kernel: usb 2-2: device descriptor read/64, error -71 Nov 04 20:37:08 wizard kernel: usb usb2-port2: attempt power cycle Nov 04 20:37:09 wizard kernel: usb 2-2: new low-speed USB device number 5 using xhci_hcd Nov 04 20:37:09 wizard kernel: usb 2-2: Device not responding to setup address. Nov 04 20:37:09 wizard kernel: usb 2-2: Device not responding to setup address. Nov 04 20:37:10 wizard kernel: usb 2-2: device not accepting address 5, error -71 Nov 04 20:37:10 wizard kernel: usb 2-2: new low-speed USB device number 6 using xhci_hcd Nov 04 20:37:10 wizard kernel: usb 2-2: Device not responding to setup address. Nov 04 20:37:10 wizard kernel: usb 2-2: Device not responding to setup address. Nov 04 20:37:10 wizard kernel: usb 2-2: device not accepting address 6, error -71 Nov 04 20:37:10 wizard kernel: usb usb2-port2: unable to enumerate USB device Then unplugging and re-plugging in the mouse restart it, e.g. Nov 04 20:53:37 wizard kernel: usb 2-2: new low-speed USB device number 7 using xhci_hcd Nov 04 20:53:37 wizard kernel: usb 2-2: New USB device found, idVendor=045e, idProduct=0040 Nov 04 20:53:37 wizard kernel: usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Nov 04 20:53:37 wizard kernel: usb 2-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) Nov 04 20:53:37 wizard kernel: usb 2-2: Manufacturer: Microsoft Nov 04 20:53:37 wizard mtp-probe[5841]: checking bus 2, device 7: "/sys/devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb2/2-2" Nov 04 20:53:37 wizard kernel: input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb2/2-2/2-2:1.0/0003:045E:0040.0002/input/input27 Nov 04 20:53:37 wizard kernel: hid-generic 0003:045E:0040.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:26:00.0-2/input0 Nov 04 20:53:37 wizard mtp-probe[5841]: bus: 2, device: 7 was not an MTP device What could cause a USB port to just disconnect? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] zypper dup lost gpgkey from 42.3?
by David C. Rankin 04 Nov '19

04 Nov '19

All, After my first zypper dup, there are some strange side-effects I'm trying to chase down. One appeared when trying to reply to Carlos on this list. Tbird reported it could not find my secret key to sign the reply? Huh? Sure enough, checking my list of keys after zypper dup clearing shows my most recently added gpg key was gone. I have 6 keys, but after zypper dup only 5 remain. The missing key was the one that is automatically chosen to sign mails to this list when the senders message is signed (I've signed hundreds of messages to the list with it). But after update, only the following remained: gpg2 --list-secret-keys /home/david/.gnupg/pubring.gpg ------------------------------ sec dsa1024 2007-08-17 [SC] <snip> sec dsa1024 2007-03-22 [SCA] <snip> sec dsa1024 2007-10-15 [SC] <snip> sec dsa2048 2011-11-12 [SC] <snip> sec rsa2048 2017-02-24 [SC] <snip> The last key added in 42.3... sec rsa2048 2017-05-22 [SC] was simply gone. To restore the key, I had to re-import the key from a backup (thank God I saved one): gpg --import ~/cnf/gnupg/gpgseckeys <snip> gpg: key xxxxxxxxxxxxxxxx: secret key imported gpg: Total number processed: 6 gpg: unchanged: 6 gpg: secret keys read: 6 gpg: secret keys imported: 1 gpg: secret keys unchanged: 5 What in the zypper dup process from 42.3 to 15.0 could cause the last key add in 42.3 to be lost? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] aMule 2.3.3 from packman repo in openSUSE Leap 15.1
by Istvan Gabor 04 Nov '19

04 Nov '19

Hello: I asked this on the packman mailing list but had not got an answer. I installed aMule-2.3.2.20181119.20afd75fa-lp151.2.1.x86_64.rpm (downloaded from https://ftp5.gwdg.de/pub/linux/packman/suse/openSUSE_Leap_15.1/Extra/x86_64/) in openSUSE Leap 15.1. After starting aMule in a few minutes it uses 100% CPU and hangs the computer. I must press the reset button because the computer becomes unresponsive. This make this aMule version unusable for me. The same occurs when using updated packman package aMule-2.3.2.20190827.2a1b09233-lp151.1.2.x86_64 Any idea, how to fix it, or why this occurs? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] bumblebee again :-(
by jdd＠dodin.org 04 Nov '19

04 Nov '19

Hello, Leap 15.1 upto date Bumblebee was perfectly working a month ago, but don't anymore I need it to run DaVinci Resolve (proprietary, I know, worked perfectly) I have read some forum threads, but with no result I only use nouveau, not the proprietary driver messages below idéa? thanks jdd error message: > optirun glxspheres [ 67.456336] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied [ 67.456371] [ERROR]Aborting because fallback start is disabled. however: systemctl status bumblebeed ● bumblebeed.service - Bumblebee C Daemon Loaded: loaded (/usr/lib/systemd/system/bumblebeed.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2019-11-01 16:53:32 CET; 19min ago Main PID: 1342 (bumblebeed) Tasks: 1 (limit: 4915) CGroup: /system.slice/bumblebeed.service └─1342 /usr/sbin/bumblebeed -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 8

[opensuse] users group membership
by Istvan Gabor 03 Nov '19

03 Nov '19

Hello: In recent openSUSE versions users are not added to "users" group in /etc/group file (and in YaST they are not marked as members of "users" group). If I remember correctly in openSUSE 9.x and 10.x users were added to "users" group. How is it set that users belong to "users" group? Why isn't it necessary to add users to "users" group? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 5

[opensuse] zypper dup 42.3 -> 15.0 loses all LibreOffice Templates/Settings, KDE Plastic/Keramik styles not available?
by David C. Rankin 03 Nov '19

03 Nov '19

All, After having done several full installs of 15.0 and 15.1 with no notable issues, I did my first zypper dup --downloadinadvance after having done a zypper clean and zypper ref. The zypper dup went well (even with the NVidia drivers and cinelerra repos). However, I have two frustrating problems that are not present in the fresh installs of 15.0 and 15.1. First with LibreOffice, all templates, settings and dictionaries are gone. Nowhere to be found in the menus. Next, I use Keramik as the KDE3 style (in both 15.0 and 15.1 fresh installs), but after a zypper dup, the Plastik and Keramik styles do not show in the menus. The versions of the packages are exactly the same between the working 15.0 fresh install box and this box. The only styles shown available are CDE, Windows 95, Platinum and SGI (yuk). None of the core KDE widget styles are listed in Appearance->Style. kdeglobals still has my widgetStyle=keramik, but it displays as CDE (first in shown list I guess) The library files are all there: $ find . -type f -name "*keramik*" ./share/apps/kwin/keramik.desktop ./share/apps/kstyle/themes/keramik.themerc ./share/doc/HTML/en/krec/krec-keramik.png ./lib64/kde3/kwin3_keramik.so ./lib64/kde3/kwin_keramik_config.so ./lib64/kde3/kwin3_keramik.la ./lib64/kde3/kwin_keramik_config.la ./lib64/kde3/plugins/styles/keramik.so ./lib64/kde3/plugins/styles/keramik.la ./lib64/kde3/kstyle_keramik_config.so ./lib64/kde3/kstyle_keramik_config.la I have run kbuildsycoca --noincremental to eliminate a cache issue and restarted the desktop, no joy.... So where has my LibreOffice config gone and where have the default styles gone? Any thoughts/guesses? ++++++++++++++++++++++++++++++++++++++++ 2 other notes ++++++++++++++++++++++++++++++++++++++++ ../repositories/X11:Utilities is not present for 15.0 (it is there for 15.1 and 15.2) which is where the rdesktop package comes from. (there is no kdesktop for 15.0 in OSS or Update -- but there is one for 15.1) There is a dependency for the 15.1 package from update "pkgconfig(oa)" that the normal pkgconfig-devel for 15 will not satisfy. Where is an rdesktop rpm for 15.0? Also, IMHO adding --allow-vendor-change as part of a zypper dup is a bad idea... -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] imagemagick convert
by David C. Rankin 01 Nov '19

01 Nov '19

Wow!, ImageMagick is now crippled by default. You have to change security policy to convert a .pdf to a .jpg. I attempted to convert: $ convert 20191030_Gohmert.pdf -resize 151 -quality 90 -background white 20191030_Gohmert_thumb.png convert: not authorized `20191030_Gohmert.pdf' @ error/constitute.c/ReadImage/464. convert: no images defined `20191030_Gohmert_thumb.jpg' @ error/convert.c/ConvertImageCommand/3149. What? I'm not authorized to use convert?? Sadly, it seems that is so: https://stackoverflow.com/questions/42928765/convertnot-authorized-aaaa-err… Changing the security policy file and I can now use it. Do we really want to ship a broken imagemagick by default? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 7

[opensuse] Discontinuation Notice on 15.0 - No longer plan to support it until 16.0 released?
by David C. Rankin 01 Nov '19

01 Nov '19

All, Just for clarification, in an earlier thread on this list, the plan (likely) was to support 15.0 with updates until the release of 16.0. On the Security and Announce lists, Marcus gave Advance Notice of discontinuation of 15.0 at the end of November. It is no longer the plan to extend 15.0 until 16.0 is release? As it is, that will leave 15.1 as the only release, 15.2 isn't scheduled for release until May?? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 8

[opensuse] disable overwriting grub.cfg
by Istvan Gabor 31 Oct '19

31 Oct '19

Hello: My question applies to all openSUSE versions that use grub2 and dracut/mkintird. Currently I use Leap 15.1, and 42.2. I do not like the default grub configuration therefore I adjust /boot/grub2/grub.cfg manually. When I update the kernel or use mkinitrd, grub.cfg is regenerated, and my settings are overwritten. How can I disable regeneration of grub.cfg? I want to take care of grub.cfg myself. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 14

[opensuse] systemctl command line completion is very slow
by Carlos E. R. 31 Oct '19

31 Oct '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Suppose I type: systemctl status smart[tab][tab] and I get nothing. One second, two seconds... so I insist and hit tab several times, and after several seconds I get (one line per second): Isengard:~ # systemctl status smart smartcard.target smartd.service smartd_generate_opts.path smartd_generate_opts.service Isengard:~ # systemctl status smart smartcard.target smartd.service smartd_generate_opts.path smartd_generate_opts.service Isengard:~ # systemctl status smart smartcard.target smartd.service smartd_generate_opts.path smartd_generate_opts.service Isengard:~ # systemctl status smart and then I can type "d" and enter. Why is it that slow? It is an M2 disk. ie, SSD technology. It responds instantly when completing a normal command: Isengard:~ # smart smart_agetty smartctl smartd Isengard:~ # smart And that system is not busy at all, load 0.20 - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXbWH4Bwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVGVsAn0iKRPoFDlOYkwmj9Y7r OFv4Mt0qAJ9IUPwXKdECRzNyJaD5HiR1dZU6Yg== =lB6T -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 15

Re: [opensuse] Trying to make audio play under a different user, with pulse? Solved.
by Michael Hamilton 31 Oct '19

31 Oct '19

On Tuesday 29 October 2019, Carlos E. R. wrote: > > Hi, > > I bumped into this post from 2014 that says how to do the above: > > <http://billauer.co.il/blog/2014/01/pa-multiple-users/> > > basically, he says to: > > cp /etc/pulse/default.pa ~/.pulse/ > > and then edit ~/.pulse/default.pa and add this line: > > load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1 > > > > And on the second user, edit ./-pulse/client.conf and add: > > default-server = 127.0.0.1 > > > The comments say of some modifications. It is now not directory .pulse, > but "/.config/pulse/", and I assume file "default.pa". And on the other > user, it is /.config/pulse/client.conf > > So now I have (two users; cer has the desktop): > > cer@Isengard:~> cat .config/pulse/default.pa | grep 127 > load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1 > cer@Isengard:~> > > cer-g@Isengard:~> cat .config/pulse/client.conf > default-server = 127.0.0.1 > cer-g@Isengard:~> > > I logout, login, and try - does not work: > > cer-g@Isengard:~> paplay /usr/share/sounds/purple/login.wav > Connection failure: Connection refused > pa_context_connect() failed: Connection refused > cer-g@Isengard:~> > > (paplay is the pulseaudio command to play sounds) > > (paplay does work as "cer" - but not via ssh) > > > I was going to ask here for ideas, then found this comment from 2016: > > +++--------------- > Note that you can also set network access using paprefs (Debian package of > same name). In paprefs, choose Network server => Enable network access to > local sound devices & Don’t require authentication. > There’s no need to copy/edit default.pa or to create a client.conf for the > secondary user(s). > > Paprefs uses gconf and stores its config in > ~/.gconf/system/pulseaudio/modules/remote-access/\%gconf.xml (you’d better > remember this if you also use a default.pa and are wondering why something > doesn’t work). > ---------------+++ > > So I undid what I had done so far (delete those two new config files), > installed paprefs, did that change, tested, and it works! I can play > "kodi" as another user :-) > > (I want kodi as another user as a trick to test a different kodi config) > > > > The worry now is that any user (local, I hope) can play sound. No security > control. > > I have some notes I wrote up when I last wanted to do this on Leap and it still seems to be working on tumbleweed. Your devices will differ, but maybe the rest would apply. - Sound, remote sound use UNIX sockets - server user /home/michael/.pulse/default.pa .include /etc/pulse/default.pa # Share this server load-module module-native-protocol-unix auth-anonymous=1 socket=/tmp/share-pulse # Default output to analog onboard sound and usb fiio load-module module-combine-sink sink_name=combined slaves=alsa_output.pci-0000_00_14.2.analog-stereo,alsa_output.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo set-default-sink combined KDE default order of outputs Settings->hardware->audio and video Select audio-playback (to configure all playback sources) Reorder Prefer/Defer to put devices in prefered order. X11 client shared audio Find prefered sink name: pactl list short sources Put in /home/clientuser/.pulse/client.conf default-server = unix:/tmp/share-pulse default-sink = alsa_output.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo Set alsa to use pulse in /home/clientuser/.asoundrc (but need to figure out how to avoid looping if logged in locally - perhaps define alsa fallbacks) pcm.!default { type pulse device "alsa_output.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo" } ctl.!default { type pulse } I hope this helps. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Advice for NVIDIA and Tumbleweed
by Roger Oberholtzer 30 Oct '19

30 Oct '19

I need to use a GPU/CUDA for some deep learning work. It should result in at least a 100x speedup compared to using the CPU. So, I will be needing to use the NVIDIA drivers instead of Noveau. I have a couple questions: 1. I see that the kernel drivers on https://download.nvidia.com/opensuse/tumbleweed/x86_64/ are for kernel-default-5.3.6-1.1.x86_64, while the current one (on my system) is kernel-default-5.3.7-1.2.x86_64. I know that the NVIDIA stuff is usually a little behind. When doing a zypper dup, has it worked that the kernel does not get updated until all dependencies (e.g. NVIDIA) are present? Or does one need to do something else to keep these two things consistent? 2. Are there any things one should consider related to CUDA? Any kernel options so set? Anyone else compiling/running CUDA code on Tumbleweed? https://en.opensuse.org/SDB:NVIDIA_drivers says a little bit. But I don't see much about this there. TIA for any shared experiences. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Dark theme forced on XFCE
by Carlos E. R. 29 Oct '19

29 Oct '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, when I upgraded my "server" to 15.1 from 15.0, the XFCE desktop "Appeareance" got switched to "Mint-Y-Darker-Teal". I hate dark themes, I can not read things. The borders are so dark that I don't know where a window ends to catch the border with the mouse. But the thing is, if I go to settings/Appearance and choose a light theme such as Aswaita or Clearlooks, or Crux, the tittle bar of the windows stays dark. Is this a bug? Something I can do to force change of the title bar? - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXbg4shwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVyZYAn35dsYkpTQYXKPYNdukd Ix0fNVugAJ4xqD+XXWIgU1vkJpvpgBXjM9vWRg== =A1ng -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] os-en
by Carlos E. R. 29 Oct '19

29 Oct '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Just after I login (XFCE, 15.1), I get 100% CPU, and this in the log - hundreds of coredumps, non stop: .... <3.6> 2019-10-25 12:07:44 Telcontar dbus-daemon 4500 - - [session uid=1000 pid=4500] Activating via systemd: service name='org.freedesktop.Tracker1' unit='tracker-store.service' requested by ':1.67' (uid=1000 pid=5669 comm="gdbus call -e -d org.freedesktop.DBus -o /org/free") <3.6> 2019-10-25 12:07:44 Telcontar dbus-daemon 4500 - - [session uid=1000 pid=4500] Successfully activated service 'org.freedesktop.Tracker1' <3.6> 2019-10-25 12:07:44 Telcontar dbus-daemon 4500 - - [session uid=1000 pid=4500] Activating via systemd: service name='org.gnome.zeitgeist.Engine' unit='zeitgeist.service' requested by ':1.70' (uid=1000 pid=5662 comm="zeitgeist-datahub ") <3.6> 2019-10-25 12:07:45 Telcontar dbus-daemon 4500 - - [session uid=1000 pid=4500] Activating via systemd: service name='org.gnome.zeitgeist.SimpleIndexer' unit='zeitgeist-fts.service' requested by ':1.71' (uid=1000 pid=5690 comm="/usr/bin/zeitgeist-daemon ") <3.6> 2019-10-25 12:07:45 Telcontar dbus-daemon 4500 - - [session uid=1000 pid=4500] Successfully activated service 'org.gnome.zeitgeist.Engine' <3.6> 2019-10-25 12:07:45 Telcontar dbus-daemon 4500 - - [session uid=1000 pid=4500] Successfully activated service 'org.freedesktop.thumbnails.Thumbnailer1' <1.4> 2019-10-25 12:07:45 Telcontar zeitgeist-datah 5732 - - zeitgeist-datahub.vala:224: Unable to get name "org.gnome.zeitgeist.datahub" on the bus! <3.6> 2019-10-25 12:07:45 Telcontar dbus-daemon 4500 - - [session uid=1000 pid=4500] Successfully activated service 'org.gnome.zeitgeist.SimpleIndexer' <1.4> 2019-10-25 12:07:49 Telcontar zeitgeist-fts 5729 - - Unable to get info on application://kde-noteedit.desktop <1.4> 2019-10-25 12:07:57 Telcontar baloo_file 5989 - - Failed to register via dbus. Another instance is running <1.7> 2019-10-25 12:07:57 Telcontar drkonqi 5990 - - found lsb_release <1.7> 2019-10-25 12:07:57 Telcontar drkonqi 5990 - - Using /proc to determine executable path <1.7> 2019-10-25 12:07:57 Telcontar drkonqi 5990 - - Executable is: "/usr/bin/baloo_file" <1.7> 2019-10-25 12:07:57 Telcontar drkonqi 5990 - - Executable exists: true <1.7> 2019-10-25 12:07:57 Telcontar drkonqi 5990 - - Enabling drkonqi crash catching <1.4> 2019-10-25 12:07:57 Telcontar drkonqi 5990 - - QSystemTrayIcon::setVisible: No Icon set <1.7> 2019-10-25 12:07:59 Telcontar drkonqi 5990 - - Sending SIGSTOP to process <3.6> 2019-10-25 12:08:02 Telcontar systemd 1 - - Created slice system-systemd\x2dcoredump.slice. <3.6> 2019-10-25 12:08:02 Telcontar systemd 1 - - Started Process Core Dump (PID 6040/UID 0). <3.6> 2019-10-25 12:08:02 Telcontar systemd 1 - - Started Process Core Dump (PID 6050/UID 0). <1.2> 2019-10-25 12:08:02 Telcontar systemd-coredump 6041 - - Process 6039 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:03 Telcontar systemd 1 - - Started Process Core Dump (PID 6060/UID 0). <1.2> 2019-10-25 12:08:03 Telcontar systemd-coredump 6051 - - Process 6049 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:03 Telcontar systemd 1 - - Started Process Core Dump (PID 6080/UID 0). <1.2> 2019-10-25 12:08:03 Telcontar systemd-coredump 6061 - - Process 6059 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:03 Telcontar systemd 1 - - Started Process Core Dump (PID 6091/UID 0). <1.2> 2019-10-25 12:08:04 Telcontar systemd-coredump 6082 - - Process 6079 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:04 Telcontar systemd 1 - - Started Process Core Dump (PID 6102/UID 0). <1.2> 2019-10-25 12:08:04 Telcontar systemd-coredump 6092 - - Process 6090 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:04 Telcontar systemd 1 - - Started Process Core Dump (PID 6112/UID 0). <1.2> 2019-10-25 12:08:04 Telcontar systemd-coredump 6103 - - Process 6101 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:05 Telcontar systemd 1 - - Started Process Core Dump (PID 6121/UID 0). <1.2> 2019-10-25 12:08:05 Telcontar systemd-coredump 6113 - - Process 6111 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:05 Telcontar pulseaudio 4571 - - E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. <4.5> 2019-10-25 12:08:05 Telcontar dbus-daemon 1535 - - [system] Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms) <3.6> 2019-10-25 12:08:05 Telcontar systemd 1 - - Started Process Core Dump (PID 6128/UID 0). <1.2> 2019-10-25 12:08:05 Telcontar systemd-coredump 6122 - - Process 6120 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:06 Telcontar systemd 1 - - Started Process Core Dump (PID 6135/UID 0). <1.2> 2019-10-25 12:08:06 Telcontar systemd-coredump 6129 - - Process 6127 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:06 Telcontar systemd 1 - - Started Process Core Dump (PID 6142/UID 0). <1.2> 2019-10-25 12:08:06 Telcontar systemd-coredump 6136 - - Process 6134 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:06 Telcontar systemd 1 - - Started Process Core Dump (PID 6149/UID 0). <1.2> 2019-10-25 12:08:07 Telcontar systemd-coredump 6143 - - Process 6141 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:07 Telcontar systemd 1 - - Started Process Core Dump (PID 6159/UID 0). <1.2> 2019-10-25 12:08:07 Telcontar systemd-coredump 6150 - - Process 6148 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:07 Telcontar systemd 1 - - Started Process Core Dump (PID 6166/UID 0). <1.2> 2019-10-25 12:08:08 Telcontar systemd-coredump 6160 - - Process 6158 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:08 Telcontar systemd 1 - - Started Process Core Dump (PID 6178/UID 0). <1.2> 2019-10-25 12:08:08 Telcontar systemd-coredump 6167 - - Process 6165 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:08 Telcontar systemd 1 - - Started Process Core Dump (PID 6185/UID 0). <1.2> 2019-10-25 12:08:08 Telcontar systemd-coredump 6179 - - Process 6177 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:09 Telcontar systemd 1 - - Started Process Core Dump (PID 6192/UID 0). <1.2> 2019-10-25 12:08:09 Telcontar systemd-coredump 6186 - - Process 6184 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:09 Telcontar systemd 1 - - Started Process Core Dump (PID 6203/UID 0). <1.2> 2019-10-25 12:08:09 Telcontar systemd-coredump 6193 - - Process 6191 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:10 Telcontar systemd 1 - - Started Process Core Dump (PID 6226/UID 0). <1.2> 2019-10-25 12:08:10 Telcontar systemd-coredump 6205 - - Process 6202 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:10 Telcontar systemd 1 - - Started Process Core Dump (PID 6235/UID 0). <1.2> 2019-10-25 12:08:10 Telcontar systemd-coredump 6227 - - Process 6225 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:10 Telcontar systemd 1 - - Started Process Core Dump (PID 6244/UID 0). <1.2> 2019-10-25 12:08:11 Telcontar systemd-coredump 6236 - - Process 6234 (single) of user 1000 dumped core. <3.6> 2019-10-25 12:08:11 Telcontar systemd 1 - - Started Process Core Dump (PID 6251/UID 0). <1.2> 2019-10-25 12:08:11 Telcontar systemd-coredump 6245 - - Process 6243 (single) of user 1000 dumped core. And it goes, it goes... till I do: killall tracker-store tracker-extract tracker-miner-apps tracker-miner-fs Telcontar:~ # coredumpctl TIME PID UID GID SIG COREFILE EXE Fri 2019-10-25 12:08:02 CEST 6039 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:03 CEST 6049 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:03 CEST 6059 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:04 CEST 6079 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:04 CEST 6090 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:04 CEST 6101 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:05 CEST 6111 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:05 CEST 6120 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:06 CEST 6127 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:06 CEST 6134 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:07 CEST 6141 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:07 CEST 6148 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:08 CEST 6158 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:08 CEST 6165 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:08 CEST 6177 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:09 CEST 6184 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:09 CEST 6191 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:10 CEST 6202 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:10 CEST 6225 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:11 CEST 6234 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:08:11 CEST 6243 1000 100 31 present /usr/lib/tracker-extract ... Fri 2019-10-25 12:09:42 CEST 8215 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:09:42 CEST 8223 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:09:43 CEST 8233 1000 100 31 present /usr/lib/tracker-extract Fri 2019-10-25 12:09:43 CEST 8240 1000 100 31 present /usr/lib/tracker-extract lines 172-226/226 (END) Telcontar:~ # coredumpctl info 8240 PID: 8240 (single) UID: 1000 (cer) GID: 100 (users) Signal: 31 (SYS) Timestamp: Fri 2019-10-25 12:09:42 CEST (12min ago) Command Line: /usr/lib/tracker-extract Executable: /usr/lib/tracker-extract Control Group: /user.slice/user-1000.slice/session-4.scope Unit: session-4.scope Slice: user-1000.slice Session: 4 Owner UID: 1000 (cer) Boot ID: 279fde7586254db6b3d727f045ecd8e5 Machine ID: 2ce1d54548517a7307c1c2bc38206d00 Hostname: Telcontar Storage: /var/lib/systemd/coredump/core.single.1000.279fde7586254db6b3d727f045ecd8e5.8240.1571998182000000.lz4 Message: Process 8240 (single) of user 1000 dumped core. Telcontar:~ # Telcontar:~ # coredumpctl dump 8240 > coredumpof8240_tracker-extract PID: 8240 (single) UID: 1000 (cer) GID: 100 (users) Signal: 31 (SYS) Timestamp: Fri 2019-10-25 12:09:42 CEST (15min ago) Command Line: /usr/lib/tracker-extract Executable: /usr/lib/tracker-extract Control Group: /user.slice/user-1000.slice/session-4.scope Unit: session-4.scope Slice: user-1000.slice Session: 4 Owner UID: 1000 (cer) Boot ID: 279fde7586254db6b3d727f045ecd8e5 Machine ID: 2ce1d54548517a7307c1c2bc38206d00 Hostname: Telcontar Storage: /var/lib/systemd/coredump/core.single.1000.279fde7586254db6b3d727f045ecd8e5.8240.1571998182000000.lz4 Message: Process 8240 (single) of user 1000 dumped core. Telcontar:~ # l -h coredumpof8240_tracker-extract - -rw-r--r-- 1 root root 183M Oct 25 12:24 coredumpof8240_tracker-extract Telcontar:~ # less coredumpof8240_tracker-extract "coredumpof8240_tracker-extract" may be a binary file. See it anyway? Telcontar:~ # Telcontar:~ # locate tracker-extract | grep service /usr/lib/systemd/user/tracker-extract.service Telcontar:~ # Telcontar:~ # cat /usr/lib/systemd/user/tracker-extract.service [Unit] Description=Tracker metadata extractor [Service] Type=dbus BusName=org.freedesktop.Tracker1.Miner.Extract ExecStart=/usr/lib/tracker-extract Restart=on-failure # Don't restart after tracker daemon -k (aka tracker-control -k) RestartPreventExitStatus=SIGKILL Telcontar:~ # How can I make it not enter a fast crash loop? - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXbLOvxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVsN4AoJZ/RcnfpYieG4YTHSFj 6eNPSGwOAJ4ldsq/U8zQAKgZDYfAX5p4saY+cg== =MC/K -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 11

[opensuse] Self-destruct in 5 seconds. Have a nice day...
by Carlos E. R. 29 Oct '19

29 Oct '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Huh? I notice the above in the warning log, with a bit more detail in the messages log: <1.5> 2019-10-28T22:50:42.623834+01:00 Isengard RPM - - install paprefs-lang-0.9.10-lp151.2.3.noarch: success <1.5> 2019-10-28T22:50:42.626233+01:00 Isengard RPM - - install paprefs-lang-0.9.10-lp151.2.3.noarch: success <1.5> 2019-10-28T22:50:42.626740+01:00 Isengard RPM - - Transaction ID 5db762b2 finished: 0 <3.6> 2019-10-28T22:55:58.063198+01:00 Isengard systemd 1 - - Unmounting /var/cache/zypp/nfs_packages... <0.4> 2019-10-28T22:55:58.093851+01:00 Isengard kernel - - - [194307.441511] VFS: Busy inodes after unmount of 0:54. Self-destruct in 5 seconds. Have a nice day... <3.6> 2019-10-28T22:55:58.149233+01:00 Isengard systemd 1 - - Unmounted /var/cache/zypp/nfs_packages. <4.5> 2019-10-28T22:59:38.383442+01:00 Isengard sudo - - - cer : TTY=pts/9 ; PWD=/home/cer ; USER=root ; COMMAND=/usr/sbin/iotop -o -d 3.3333 It may refer to the automated umounting of "/var/cache/zypp/nfs_packages", via nfs - fstab: telcontar.valinor:/data/storage_c/repositorios_zypp/ /var/cache/zypp/nfs_packages nfs noauto,nofail,x-systemd.automount,x-systemd.idle-timeout=300,_netdev,nfsvers=4 0 0 I see no message in the server at that timeframe. What does it mean? What will selfdestruct, my computer? :-o - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXbdm6Rwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfV6tEAn1fWIH/RaltA1eXYvzJs TJ5eGjUfAJ9D52D2G9RnlqPS9Xk4jMKX5/oeww== =/qsB -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 10

[opensuse] Trying to make audio play under a different user, with pulse? Solved.
by Carlos E. R. 29 Oct '19

29 Oct '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I bumped into this post from 2014 that says how to do the above: <http://billauer.co.il/blog/2014/01/pa-multiple-users/> basically, he says to: cp /etc/pulse/default.pa ~/.pulse/ and then edit ~/.pulse/default.pa and add this line: load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1 And on the second user, edit ./-pulse/client.conf and add: default-server = 127.0.0.1 The comments say of some modifications. It is now not directory .pulse, but "/.config/pulse/", and I assume file "default.pa". And on the other user, it is /.config/pulse/client.conf So now I have (two users; cer has the desktop): cer@Isengard:~> cat .config/pulse/default.pa | grep 127 load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1 cer@Isengard:~> cer-g@Isengard:~> cat .config/pulse/client.conf default-server = 127.0.0.1 cer-g@Isengard:~> I logout, login, and try - does not work: cer-g@Isengard:~> paplay /usr/share/sounds/purple/login.wav Connection failure: Connection refused pa_context_connect() failed: Connection refused cer-g@Isengard:~> (paplay is the pulseaudio command to play sounds) (paplay does work as "cer" - but not via ssh) I was going to ask here for ideas, then found this comment from 2016: +++--------------- Note that you can also set network access using paprefs (Debian package of same name). In paprefs, choose Network server => Enable network access to local sound devices & Don’t require authentication. There’s no need to copy/edit default.pa or to create a client.conf for the secondary user(s). Paprefs uses gconf and stores its config in ~/.gconf/system/pulseaudio/modules/remote-access/\%gconf.xml (you’d better remember this if you also use a default.pa and are wondering why something doesn’t work). - ---------------+++ So I undid what I had done so far (delete those two new config files), installed paprefs, did that change, tested, and it works! I can play "kodi" as another user :-) (I want kodi as another user as a trick to test a different kodi config) The worry now is that any user (local, I hope) can play sound. No security control. - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXbdlZBwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVpNQAnRBV0aWBK/sZmKBZSUVU /BOf3mQcAJ9LEAnbdMP8QHiIpp73aMV5HRkIJw== =WCOy -----END PGP SIGNATURE-----

3 2

[opensuse] NetworkManager, dhcp -> "NTP_SERVER_LIST" empty
by mh＠mike.franken.de 28 Oct '19

28 Oct '19

Hi *, on my dhcp clients using NetworkManager "NTP_SERVER_LIST" is empty. So they always fall back to a static ntp policy. Looking into the lease files, they contain option ntp-servers 192.168.1.1; But this information isn't used obviously. Is this a bug or some kind of misconfiguration? I experimented with and without chrony, systemd-timedated ... To my understanding systemd-timedated should use chrony, if it is installed and an appropriate file exists in /usr/lib/systemd/ntp-units.d. chrony in turn should be provided with a list of ntp servers in /var/run/netconfig/chrony.servers, but this file remains empty, because NetworkManager never sees the above mentioned option. Any idea? TIA. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Repository search page problem
by Carlos E. R. 28 Oct '19

28 Oct '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm trying to search for a newer smartmontools package than the official one for Leap, as the current one has problems with one of my disks. So I use the Firefox search thing for openSUSE packages, and it takes me to a changed search page. First URL is: <https://software.opensuse.org/package/smartmontools?search_term=smartmontoo…> Clicking on community packages for 15 one, I see a few, so on the line for " home:plater" I click on "expert download". This takes me to a confusing page: <https://software.opensuse.org/download/package?package=smartmontools&projec…> but apparently it is asking to select openSUSE or SLE (what, doesn't it already know from the preceding page?). More confusion, and I click on "Add repository and install manually". This opens a list for all distributions, and I find this paragraph: For Leap 15.1 run the following as root: zypper addrepo https://download.opensuse.org/repositories/home:plater/Leap_15.1/home:plate… zypper refresh zypper install smartmontools So I do: Isengard:~ # zypper ar -k -f -n "OBSH Platter" "https://download.opensuse.org/repositories/home:plater/Leap_15.1/home:plate…" "OBSH_platter" Adding repository 'OBSH Platter' .....................................................................................................[done] Repository 'OBSH Platter' successfully added URI : https://download.opensuse.org/repositories/home:plater/Leap_15.1/home:plate… Enabled : Yes GPG Check : Yes Autorefresh : Yes Priority : 99 (default priority) Repository priorities in effect: (See 'zypper lr -P' for details) 90 (raised priority) : 1 repository 98 (raised priority) : 1 repository 99 (default priority) : 7 repositories Isengard:~ # zypper ref Repository 'Packman Repository' is up to date. Repository 'Local Repo' is up to date. Retrieving repository 'OBSH Platter' metadata .......................................................................................[error] Repository 'OBSH Platter' is invalid. [OBSH_platter|https://download.opensuse.org/repositories/home:plater/Leap_15…] Valid metadata not found at specified URL Please check if the URIs defined for this repository are pointing to a valid repository. Skipping repository 'OBSH Platter' because of the above error. Repository 'OBS: security' is up to date. Repository 'Main Repository (NON-OSS)' is up to date. Repository 'Update Repository (Non-Oss)' is up to date. Repository 'Main Repository (OSS)' is up to date. Repository 'Main Update Repository' is up to date. Repository 'google-chrome' is up to date. Some of the repositories have not been refreshed because of an error. Isengard:~ # As you see, it fails, invalid URL for a repo. The correct URL for 15.1 is: https://download.opensuse.org/repositories/home:plater/Leap_15.1/ Now, where can one report this error? - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXbWE1Rwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVu2AAmgO1atNZg3h+3+RIkdzE nLg73udNAJ9FB0BJm6P4+RaRIkM8cHcy5CjKWA== =fcpr -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] [Leap 15] RawTherapee in Leap15.1
by Bob Williams 24 Oct '19

24 Oct '19

I'm trying to install RawTherapee on a Leap 15.1 machine. There is no package in the openSUSE repositories, and the download on the RawTherapee website is a 97MB *.appimage file. I'm not sure what to do with an .appimage. Any suggestions, please? Bob -- Bob Williams System: Linux 4.12.14-lp151.28.20-default Desktop: KDE Frameworks: 5.55.0, Qt: 5.9.7 and Plasma: 5.12.8

3 3

[opensuse] How do I install ocs-url on Leap 15.1?
by Lance Drager 24 Oct '19

24 Oct '19

There is a package on obs for 15.0, which (of course) doesn't work. Can't seem to locate source for ocs-url. Thanks. Lance Drager

2 1

[opensuse] systemd service unit with instance not working ? (leap 42.3)
by Per Jessen 23 Oct '19

23 Oct '19

I'm sure this is a case of needing another pair of eyes. Mine are getting tired. I have the following service unit: ------------------------ systemctl cat firewall@ipv4 # /etc/systemd/system/firewall@.service [Unit] Description=firewall %i After=network.target [Service] Type=oneshot ExecStart=/usr/local/bin/firewall-%i ExecStop=/usr/local/bin/firewall-%i stop RemainAfterExit=yes [Install] WantedBy=multi-user.target ---------------------------- When I try to start it, it fails: systemd[1]: Starting firewall ipv4... systemd[1094]: firewall(a)ipv4.service: Failed at step EXEC spawning /usr/local/bin/firewall-%i: No such file or directory systemd[1]: firewall(a)ipv4.service: Main process exited, code=exited, status=203/EXEC systemd[1]: Failed to start firewall ipv4. Despite the '/usr/local/bin/firewall-%i: No such file or directory', that script _does_ exist: # ls -lF /usr/local/bin/firewal* -rwxr-xr-x 1 root root 5651 Oct 22 15:08 /usr/local/bin/firewall-ipv4* -rwxr-xr-x 1 root root 2522 May 20 17:41 /usr/local/bin/firewall-ipv6* Remarkably, the exact same works just fine on Leap 15.0. Can anyone help me spot my mistake? Thanks. -- Per Jessen, Zürich (11.8°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] changes between openssh 6.6p1 (leap42.1) and openssh 7.2p2 (Leap 42.3) ?
by Per Jessen 23 Oct '19

23 Oct '19

I'm moving a customer to Leap42.3 (they require php5 which we don't seem to build for leap151) - they are now unable to login, public key ssh. Failed publickey for 'brian' from 1.2.3.4 port 33188 ssh2: RSA SHA256:snip Is anyone aware of any significant/incompatible changes between 6.6p1 and 7.2p2 ? With 6.6, the message looked quite different: Accepted publickey for brian from 1.2.3.4 port 56047 ssh2: RSA 57:ba:49:2c:3e:42:cf:78:38:a0:74:83:2c:6a:40:9c [MD5] The client is: Client protocol version 2.0; client software version OpenSSH_6.7p1 Ubuntu-5ubuntu1.4 -- Per Jessen, Zürich (11.8°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Youtube viewing on Chrome based browsers
by Ianseeks 23 Oct '19

23 Oct '19

Hi Is it just me or does Firefox produce better and smoother youtube viewing experience than the Chrome based browsers? I seem to get a lot of image splitting, blanking and shuddering watching youtube videos in Chrome based browsers. Ian -- opensuse:tumbleweed:20191018 Qt: 5.13.1 KDE Frameworks: 5.63.0 - KDE Plasma: 5.17.0 - kwin 5.17.0 kmail2 5.12.2 - akonadiserver 5.12.2 - Kernel: 5.3.6-1-default - xf86-video-nouveau: 1.0.15 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] KDE3 and KDE4/plasma5 in Leap 15.1
by Istvan Gabor 23 Oct '19

23 Oct '19

Hello: I have installed openSUSE Leap 15.1 with KDE3 and it works nicely. Unfortunately there are a few programs (eg digikam) a little bit obsolete for my purposes and I'd prefer to use newer versions, either KDE4 or plasma 5 versions. In openSUSE Leap 42.3 it was possible to install KDE4 programs from a wolfi323 repo. I wonder if it is possible to install KDE4 in Leap 15.1 as well. I am really confused by the terms plasma and KDE frameworks, therefore I don't know what to search for. Plasma 5 would be OK as well but in Leap 15.0 KDE3 and plasma 5 can not coexist. If I remember correctly both KDE3 and plasma 5 use the same .kde dir for their settings. Is there any change regarding this in 15.1? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] looking for portable ssd
by Doug McGarrett 23 Oct '19

23 Oct '19

Saw a Samsung portable 500G ssd, but it spoke about s/w for Windows and Mac. I'd like to have a removable ssd to backup my TW system. Is there some kind of software I need to do this, and if so, where do I find it? What is the simplest software to do the job? I'm running on just one partition (not my choice, but openSuse's). The internal drive is multi-boot with Win 10. (I don't care if Windows is backed up.) All information welcome. Thanx--doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

15 44

[opensuse] smartctl usage & GSmartControl
by Dave Howorth 22 Oct '19

22 Oct '19

Prompted by recent discussions about SSD vs HDD I decided to check out my devices with smartctl. But I'm overwhelmed by the smartctl man page! My main disk - sda - is reported to be fine :) My backup disk - sdb - is not found # smartctl -P show /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.14-lp150.12.7-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sdb: Unknown USB bridge [0x4971:0xce23 (0x000)] Please specify device type with the -d option. Use smartctl -h to get a usage summary So I tried telling it that the disk is SATA and with that it can find it: # smartctl -P show -d sat /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.14-lp150.12.7-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org Drive found in smartmontools Database. Drive identity strings: MODEL: Hitachi HDS721010CLA332 FIRMWARE: JP4OA3EA match smartmontools Drive Database entry: MODEL REGEXP: (Hitachi )?HDS7210((16|25)CLA[36]82|(32|50)CLA[36]62|(64|75|10)CLA[36]3[02]) FIRMWARE REGEXP: .* MODEL FAMILY: Hitachi Deskstar 7K1000.C ATTRIBUTE OPTIONS: None preset; no -v options are required. but how do I get it to actually scan it regularly like my main disk? I installed GSmartControl in the hope it would be simpler to use. But the Help/Help button does nothing, and for my backup disk it says: Drive information: /dev/sdb (scsi), 1.00 TB, HDS721010CLA332 Basic health check: Unknown Model family: Unknown and the checkboxes to Enable SMART and to Enable Offline Data Collection are both greyed out. So how come it doesn't seem to be able to access the same data as smartctl? Does anybody use it, or is it really as useless as it seems? YaST Partitioner can see it without me having to do anything special, why can't smart? Similar questions also apply to an SD card I happen to have plugged in at the moment! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Tumbleweed boot difficulty
by Roger Oberholtzer 22 Oct '19

22 Oct '19

I have done a new Tumbleweed install. All went fine. But booting is a problem. I need to run the original installer + update to get it to boot. Then, after doing the update (basically installing any new packages), it boots in to the OS fine. But on it's own, I get the graphic boot menu. Then a black window that lists the name of the kernel, and the name if the initrd file. Then ... nothing. No complaint. It just waits. No keys can do anything (e.g., an alternative console) When it boots, it is working fine, I can do most everything I have tried. I see that /proc/cmdline says: BOOT_IMAGE=/boot/vmlinuz-5.3.2-1-default root=UUID=02e67b6d-c8b5-4de1-8ac5-96a13174a855 splash=silent resume=/dev/disk/by-id/ata-WDC_WD10EARS-003BB1_WD-WCAV5J249635-part3 quiet splash=silent resume=/dev/disk/by-id/ata-WDC_WD10EARS-003BB1_WD-WCAV5J249635-part3 quiet mitigations=off The devices and UUID look correct. I'm just curious why the resume= and quite are listed twice. Could that be the problem? I know that the kernel was updated in all of this. The dracut is whatever the kernel packages does. I have not changed anything. I have tried various boot alternatives (rescue, a snapshot, etc). All do the same. This is a new one on me. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 18

[opensuse] Help Reading Serial Device /dev/bus/usb/001/010
by David C. Rankin 22 Oct '19

22 Oct '19

All, I have a small ARM board that I am working with: http://processors.wiki.ti.com/index.php/LAUNCHXL2-RM46 I can build for the board using gcc-arm-none-eabi and flash the firmware with the TI UniFlash software. However I cannot figure out how to connect a serial device to it. The manual says I should be able to: Configure Baud Rate: 19200, Data Bits: 8, Stop Bits: 2 and Parity: None http://processors.wiki.ti.com/index.php/LAUNCHXL2_RM46:_Project_1 When connected there are two /dev/tty devices created: crw-rw-rw- 1 root dialout 166, 0 Oct 12 21:55 /dev/ttyACM0 crw-rw-rw- 1 root dialout 166, 1 Oct 12 21:55 /dev/ttyACM1 These are in some manner related to: /sys/devices/pci0000\:00/0000\:00\:1c.7/0000\:26\:00.0/usb1/1-1 and the character device /dev/char/189:9 I have tried minicom through /dev/ttyACM0, without success. I can find the device and query it through: # udevadm test /sys/devices/pci0000\:00/0000\:00\:1c.7/0000\:26\:00.0/usb1/1-1 calling: test version 228 This program is for debugging only, it does not run any program specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. === trie on-disk === tool version: 228 file size: 7007575 bytes header size 80 bytes strings 1743863 bytes nodes 5263632 bytes Load module index <snip> starting '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb1/1-1 1 10' '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb1/1-1 1 10'(out) '0' Process '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb1/1-1 1 10' succeeded. MODE 0666 /etc/udev/rules.d/71-ti-permissions.rules:10 handling device node '/dev/bus/usb/001/010', devnum=c189:9, mode=0666, uid=0, gid=0 preserve permissions /dev/bus/usb/001/010, 020666, uid=0, gid=0 preserve already existing symlink '/dev/char/189:9' to '../bus/usb/001/010' created db file '/run/udev/data/c189:9' for '/devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb1/1-1' ACTION=add BUSNUM=001 DEVNAME=/dev/bus/usb/001/010 DEVNUM=010 DEVPATH=/devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb1/1-1 DEVTYPE=usb_device DRIVER=usb ID_BUS=usb ID_MODEL=XDS110__03.00.00.02__Embed_with_CMSIS-DAP ID_MODEL_ENC=XDS110\x20\x2803.00.00.02\x29\x20Embed\x20with\x20CMSIS-DAP ID_MODEL_ID=bef3 ID_REVISION=0100 ID_SERIAL=Texas_Instruments_XDS110__03.00.00.02__Embed_with_CMSIS-DAP_HLR46000 ID_SERIAL_SHORT=HLR46000 ID_USB_INTERFACES=:020201:0a0000:ff0000:030000: ID_VENDOR=Texas_Instruments ID_VENDOR_ENC=Texas\x20Instruments ID_VENDOR_FROM_DATABASE=Texas Instruments, Inc. ID_VENDOR_ID=0451 MAJOR=189 MINOR=9 PRODUCT=451/bef3/100 SUBSYSTEM=usb TYPE=239/2/1 USEC_INITIALIZED=120561513447 run: '/usr/lib/virtualbox/VBoxCreateUSBNode.sh 189 9 ef' Unload module index Unloaded link configuration context. This is the correct udev rule for the device, but that is where I am stuck. What I need to do is get a serial console open to it so that when I load an executable that reads/writes to stdin/stdout I can see the output and provide the input. (blinking diodes are the board are nice, but worthless for providing user authentication through) Connecting a serial console seems like a simple process, but I must be missing something stupid simple about it. Minicom can be configured for either /dev/ttyACM0 or /dev/ttyACM1 (and N82 19200) but there is nothing ever output on either (even after loading a program that generates output to stdout) Yes, the flash goes fine and I can load different executables to make the diodes respond in varying ways -- so the fact that the code is loaded and running correctly if verified, but how do I interface with the serial terminal on this thing? Anybody been down this road before? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 9

[opensuse] restoring efi boot / home after failed SSD
by gumb 20 Oct '19

20 Oct '19

I recently suffered a cataclysmic SSD failure. This machine has two SSD drives, the M.2 drive (sdb) holds the root partition (sdb1) and swap, which is all still intact, whilst the SATA drive which failed (sda) held the boot/efi partition in addition to the /home partition, and hence all my personal data. I've installed a new replacement SATA SSD, booted the openSUSE rescue system from a USB stick, changed root to the original oS installation on sdb1 and then, from within yast2, created a new /boot/efi partition (sda1) and /home (sda2) on the new disk. What is the next step to get this to boot? Currently I'm at the error: no such device: /efi/boot/fallback.efi -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] SSH Public Key Authentication Broken By Upgrade [zypper dup]
by Adam Tauno Williams 19 Oct '19

19 Oct '19

After doing a zypper dup to 15.1 all appears to be working great - as expected - except however for SSH public key authentication. GNOME does not prompt for the passphrase and authentication falls back to password mode [assuming the server allows it]. Tips / pointers? __agent is running, correctly linked in environment__ awilliam@beast01:~> ps ax | grep key ... 7245 ? S 0:00 /usr/bin/ssh-agent -D -a /run/user/1000/keyring/.ssh awilliam@beast01:~> ls -l /run/user/1000/keyring/.ssh srw------- 1 awilliam users 0 Oct 17 08:39 /run/user/1000/keyring/.ssh awilliam@beast01:~> env | grep SSH SSH_AUTH_SOCK=/run/user/1000/keyring/ssh SSH_ASKPASS=/usr/lib/ssh/ssh-askpass SSH_AGENT_PID=3113 __OS Relase__ awilliam@beast01:/etc> cat os-release NAME="openSUSE Leap" VERSION="15.1 " ID="opensuse-leap" ID_LIKE="suse opensuse" VERSION_ID="15.1" PRETTY_NAME="openSUSE Leap 15.1" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:leap:15.1" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" __agent knows the keys__ awilliam@beast01:/etc> ssh-add -l 1024 SHA256:Mom8WjkrR5gYjlRXsH4ROtA7HcsvC0UI/2c+BFsEp0U ogo(a)workflow.mormail.com (DSA) 1024 SHA256:xVXJ4TscK0z/lZRf6t6n/9yt3G9sIxy46bmGd2RDCr4 awilliam(a)linux-yu4c.site (DSA) 1024 SHA256:ZNRZeqkdHCI266I72nNCOiwagJ85XLScOkmEtwYIilk awilliam(a)linux-86wr.site (DSA) __entering the passphrase 'works' but is not effective__ awilliam@beast01:/etc> ssh-add Enter passphrase for /home/awilliam/.ssh/id_dsa: Identity added: /home/awilliam/.ssh/id_dsa (/home/awilliam/.ssh/id_dsa) __gcr-ssh-askpass is installed__ awilliam@beast01:~> ls -l /usr/lib/gcr-ssh-askpass -rwxr-xr-x 1 root root 43920 Feb 24 2019 /usr/lib/gcr-ssh-askpass awilliam@beast01:~> rpm -qf /usr/lib/gcr-ssh-askpass gcr-ssh-askpass-3.28.1-lp151.1.1.x86_64 -- Adam Tauno Williams <mailto:awilliam@whitemice.org> GPG D95ED383 OpenGroupware Developer <http://www.opengroupware.us/> -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 10

[opensuse] SegFault 7-times today just to retrieve packages during Zypper Up (no fix yet?)
by David C. Rankin 19 Oct '19

19 Oct '19

All, This is bizarre. Today on Leap 15, I went to zypper up and it SegFaulted 7 times before it finally downloaded all packages. It would download 3-4 packages, then segfault. This was apparently already reported as a bug several weeks ago. Is a fix or workaround out? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Run script when a program ends
by Istvan Gabor 17 Oct '19

17 Oct '19

Hello: I have a program which saves data in a file. It writes the file when the user quits the program. I would like to automatically save a copy of the data file when/after the program quits. How can I achieve that? I could write a script that makes a copy of the file, but don't know how to start the script when the program quits. Any idea or solution is welcomed. Thanks in advance, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 12

[opensuse] urgent help needed: Leap 15.1, firewalld, router not forwarding IPv6
by Mathias Homann 15 Oct '19

15 Oct '19

Hi, I just upgraded my firewall/router from 15.0 to 15.1 with zypper, and now it's not forwarding IPv6 anymore. I have not changed anything about the firewall settings (internal interface is in trusted, external in external, masquerade is on in external), before the upgrade I could talk IPv6 from any internal host just fine, now i can't. I can talk IPv6 from the router itself, but not from any machines behind it. Any ideas? Cheers *Mathias Homann* Mathias.Homann@openSUSE:.org[1] irc: [Lemmy] @ freenode, ircnet obs: lemmy04 *gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102* -------- [1] mailto:Mathias.Homann@eregion.de

3 4

[opensuse] sig 7 bus error
by David T-G 14 Oct '19

14 Oct '19

Hi again, all -- This time I do have a real problem. I shut down my laptop davidtg@wench:~> uname -a ; cat /etc/os-release Linux wench 4.4.140-62-default #1 SMP Tue Jul 17 12:14:34 UTC 2018 (951943d) x86_64 x86_64 x86_64 GNU/Linux NAME="openSUSE Leap" VERSION="42.3" ID=opensuse ID_LIKE="suse" VERSION_ID="42.3" PRETTY_NAME="openSUSE Leap 42.3" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:leap:42.3" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" to bring it home, and when I brought it back up I suddenly couldn't run Chrome (Chromium); it pops up its window but then immediately dies. Here's what it throws: davidtg@wench:~> /usr/bin/chromium --disable-gpu --user-data-dir=/mnt/data/home/davidtg/.chromium/profiles/gift [5387:5387:1004/222017.561228:ERROR:gpu_process_transport_factory.cc(1016)] Lost UI shared context. libva info: VA-API version 0.39.4 libva info: va_getDriverName() returns 0 libva info: Trying to open /usr/lib64/dri/i965_drv_video.so libva info: va_openDriver() returns -1 [5471:5471:1004/222017.875318:ERROR:vaapi_wrapper.cc(323)] vaInitialize failed: unknown libva error Received signal 7 BUS_ADRERR 7f4faef5c1bc #0 0x556ce6714fae <unknown> #1 0x556ce41f78a0 <unknown> #2 0x556ce6715367 <unknown> #3 0x7f4fc5203c10 <unknown> #4 0x556ce6a23f9a <unknown> #5 0x556ce6a2423c <unknown> #6 0x556ce6a1eb51 <unknown> #7 0x556ce6a1ed17 <unknown> #8 0x556ce6a1f6da <unknown> #9 0x556ce69e2275 <unknown> #10 0x556ce67846ec <unknown> #11 0x556ce6784859 <unknown> #12 0x556ce6785423 <unknown> #13 0x556ce7d28569 <unknown> #14 0x556ce7d419d0 <unknown> #15 0x556ce7d41f6c <unknown> #16 0x556ce9b89991 <unknown> #17 0x556ce668e448 <unknown> #18 0x556ce66e5afd <unknown> #19 0x556ce6721ff2 <unknown> #20 0x556ce66e769e <unknown> #21 0x556ce67373a4 <unknown> #22 0x556ce6737904 <unknown> #23 0x556ce6722621 <unknown> #24 0x7f4fc51fb724 start_thread #25 0x7f4fbc645e8d __clone r8: 00007f4f9269ccc8 r9: 0000556ceb968721 r10: 0000556ce6a231f0 r11: 0000000000000014 r12: 000008e930b9c928 r13: 00007f4f9269cd80 r14: 00007f4f9269cec4 r15: 0000556ceb90ef38 di: 000008e930b9c928 si: 0000000000000002 bp: 00007f4f9269ccb0 bx: 000008e930b9c928 dx: 00007f4faef5a600 ax: 00007f4faef5c1bc cx: 0000556ceb968721 sp: 00007f4f9269cc50 ip: 0000556ce6a23f9a efl: 0000000000010202 cgf: 0000000000000033 erf: 0000000000000004 trp: 000000000000000e msk: 0000000000000000 cr2: 00007f4faef5c1bc [end of stack trace] Calling _exit(1). Core file will not be generated. Firefox gives me a much shorter error with similar disappearing-window results: davidtg@wench:~> /usr/bin/firefox -p gift ExceptionHandler::GenerateDump cloned child 6233 ExceptionHandler::SendContinueSignalToChild sent continue signal to child ExceptionHandler::WaitForContinueSignal waiting for continue signal... Bus error (core dumped) I've actually bounced the box a few times with no better luck. I know that I tried something else that failed, but I don't recall just what it was. Dolphin works, though, and shotcut will view a video file, so it isn't simply all graphics stuff. Um, what did I miss here?!? TIA & HANN :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 11

[opensuse] close lid => suspend => can't boot
by David T-G 14 Oct '19

14 Oct '19

Hi, all -- This stupid laptop really has me ticked off this morning. I took it from the desk to bed where I'm home for a sick day (yes, my patience is already thin!) and found, much to my surprise, that it suddenly goes to sleep when I close the lid. ?!? Well, fine; I just won't close the lid when I put it back later, right? But I opeend it and it failed to resume, so I had to power-cycle it ... and it still won't boot! ARRRRRGH!!! Whether I try a normal boot or recovery mode, I only get as far as [ 5.214975] radeon 0000:01:00.0: failed VCE resume (-110). after a few very brief flashes of boot scroll that I can't catch. I went googling around for how to disable the sleep thing, but if I can't get it running again then that part is moot. Any idea how I can get this unstuck? TIA again :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Help: System hangs on graphical login in Leap-15.1
by Josef Wolf 14 Oct '19

14 Oct '19

Hello, I have installed Leap-15.1 about two months ago. (Almost) everything was working fine. Today, I booted up this system again, and can no longer login to KDE. I can type username/password, but then nothing happens. Keyboard is dead. Only mouse can be mooved. Even CTRL-ALT-F1 won't work to switch to a virtual console. As long as I do not try to login to KDE, I can switch to virtual console via CTRL-ALT-F1 and login as root and/or ordinary user. When I switch back to CTRL-ALT-F7 and try to login to KDE, keyboard is dead again and login screen won't vanish. Below is /var/log/messages of the login attempt. For me, only the lines marked with "(*)" look suspicous. Maybe somebody else can get more clues out of this? Any ideas how to track this down? 2019-10-08T13:35:10.670863+02:00 kiste nmbd[1457]: [2019/10/08 13:35:10.643933, 0] ../source3/nmbd/asyncdns.c:158(start_async_dns) 2019-10-08T13:35:10.671282+02:00 kiste nmbd[1457]: started asyncdns process 1575 2019-10-08T13:35:10.671658+02:00 kiste nmbd[1457]: [2019/10/08 13:35:10.671547, 0] ../lib/util/become_daemon.c:149(daemon_status) 2019-10-08T13:35:10.671950+02:00 kiste nmbd[1457]: daemon_status: STATUS=daemon 'nmbd' : No local IPv4 non-loopback interfaces available, waiting for interface ... 2019-10-08T13:35:10.672210+02:00 kiste nmbd[1457]: [2019/10/08 13:35:10.671621, 0] ../source3/nmbd/nmbd_subnetdb.c:254(create_subnets) 2019-10-08T13:35:10.672456+02:00 kiste nmbd[1457]: NOTE: NetBIOS name resolution is not supported for Internet Protocol Version 6 (IPv6). 2019-10-08T13:35:10.864172+02:00 kiste systemd[1]: Started Permit User Sessions. 2019-10-08T13:35:10.866111+02:00 kiste systemd[1]: Starting Hold until boot process finishes up... 2019-10-08T13:35:10.867905+02:00 kiste systemd[1]: Starting X Display Manager... 2019-10-08T13:35:11.032281+02:00 kiste kernel: [ 102.623966] Netfilter messages via NETLINK v0.30. 2019-10-08T13:35:11.075739+02:00 kiste kernel: [ 102.666024] ip_set: protocol 6 2019-10-08T13:35:11.171413+02:00 kiste systemd[1]: Started Backup /etc/sysconfig directory. 2019-10-08T13:35:11.190968+02:00 kiste display-manager[1582]: /etc/vconsole.conf available 2019-10-08T13:35:11.191376+02:00 kiste display-manager[1582]: KEYMAP: de-nodeadkeys 2019-10-08T13:35:11.191628+02:00 kiste display-manager[1582]: Command: localectl set-keymap de-nodeadkeys 2019-10-08T13:35:11.233687+02:00 kiste display-manager[1582]: I: Using systemd /usr/share/systemd/kbd-model-map mapping 2019-10-08T13:35:11.328999+02:00 kiste dbus-daemon[1150]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service' requested by ':1.10' (uid=0 pid=1613 comm="localectl set-keymap de-nodeadkeys ") 2019-10-08T13:35:11.392201+02:00 kiste systemd[1]: Starting Locale Service... 2019-10-08T13:35:11.488261+02:00 kiste dbus-daemon[1150]: [system] Successfully activated service 'org.freedesktop.locale1' 2019-10-08T13:35:11.489584+02:00 kiste systemd[1]: Started Locale Service. 2019-10-08T13:35:11.520151+02:00 kiste systemd[1]: Received SIGRTMIN+21 from PID 346 (plymouthd). 2019-10-08T13:35:11.532712+02:00 kiste systemd[1]: Received SIGRTMIN+21 from PID 346 (plymouthd). 2019-10-08T13:35:11.540350+02:00 kiste systemd[1]: Started Hold until boot process finishes up. 2019-10-08T13:35:11.540792+02:00 kiste systemd[1]: Started Getty on tty1. 2019-10-08T13:35:11.541069+02:00 kiste systemd[1]: Reached target Login Prompts. 2019-10-08T13:35:12.313170+02:00 kiste display-manager[1582]: Starting service sddm..done 2019-10-08T13:35:12.313800+02:00 kiste systemd[1]: display-manager.service: PID file /var/run/displaymanager.pid not readable (yet?) after start: No such file or directory 2019-10-08T13:35:12.401725+02:00 kiste sddm[1632]: Initializing... 2019-10-08T13:35:12.402959+02:00 kiste systemd[1]: Started X Display Manager. 2019-10-08T13:35:12.420681+02:00 kiste sddm[1632]: Starting... 2019-10-08T13:35:12.421341+02:00 kiste sddm[1632]: Logind interface found 2019-10-08T13:35:12.423233+02:00 kiste sddm[1632]: Adding new display on vt 7 ... 2019-10-08T13:35:12.438520+02:00 kiste sddm[1632]: Loading theme configuration from "" 2019-10-08T13:35:12.438898+02:00 kiste sddm[1632]: Display server starting... 2019-10-08T13:35:12.439431+02:00 kiste sddm[1632]: Running: /usr/bin/X -nolisten tcp -auth /run/sddm/{fb5032f4-34cb-4c7b-8da9-481c487f169d} -background none -noreset -displayfd 18 -seat seat0 vt7 2019-10-08T13:35:12.856612+02:00 kiste nscd: 1164 Prüfe auf überwachte Datei »/etc/resolv.conf«: Datei oder Verzeichnis nicht gefunden 2019-10-08T13:35:13.703788+02:00 kiste systemd[1]: Started Postfix Mail Transport Agent. 2019-10-08T13:35:13.704251+02:00 kiste systemd[1]: Started Command Scheduler. 2019-10-08T13:35:13.817417+02:00 kiste cron[1719]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 9% if used.) 2019-10-08T13:35:13.850132+02:00 kiste cron[1719]: (CRON) INFO (running with inotify support) 2019-10-08T13:35:16.959753+02:00 kiste kernel: [ 108.548292] NET: Registered protocol family 17 2019-10-08T13:35:17.521220+02:00 kiste sddm[1632]: Setting default cursor 2019-10-08T13:35:17.650558+02:00 kiste sddm[1632]: Running display setup script "/etc/X11/xdm/Xsetup" 2019-10-08T13:35:17.848230+02:00 kiste avahi-daemon[1253]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::ca37:49b7:d23b:8919. 2019-10-08T13:35:17.848623+02:00 kiste avahi-daemon[1253]: New relevant interface eth0.IPv6 for mDNS. 2019-10-08T13:35:17.848877+02:00 kiste avahi-daemon[1253]: Registering new address record for fe80::ca37:49b7:d23b:8919 on eth0.*. 2019-10-08T13:35:18.727285+02:00 kiste sddm[1632]: Display server started. 2019-10-08T13:35:18.727706+02:00 kiste sddm[1632]: Socket server starting... 2019-10-08T13:35:18.727995+02:00 kiste sddm[1632]: Socket server started. 2019-10-08T13:35:18.803225+02:00 kiste sddm[1632]: Loading theme configuration from "/usr/share/sddm/themes/breeze-openSUSE/theme.conf" 2019-10-08T13:35:18.805662+02:00 kiste sddm[1632]: Greeter starting... 2019-10-08T13:35:18.806825+02:00 kiste sddm[1632]: Adding cookie to "/run/sddm/{fb5032f4-34cb-4c7b-8da9-481c487f169d}" 2019-10-08T13:35:19.145112+02:00 kiste sddm-helper[1893]: [PAM] Starting... 2019-10-08T13:35:19.145558+02:00 kiste sddm-helper[1893]: [PAM] Authenticating... 2019-10-08T13:35:19.145847+02:00 kiste sddm-helper[1893]: [PAM] returning. 2019-10-08T13:35:19.154847+02:00 kiste systemd[1]: Created slice User Slice of sddm. 2019-10-08T13:35:19.168396+02:00 kiste systemd[1]: Starting User Manager for UID 466... 2019-10-08T13:35:19.174255+02:00 kiste systemd-logind[1269]: New session 1 of user sddm. 2019-10-08T13:35:19.174616+02:00 kiste systemd[1]: Started Session 1 of user sddm. 2019-10-08T13:35:19.395922+02:00 kiste systemd: pam_unix(systemd-user:session): session opened for user sddm by (uid=0) 2019-10-08T13:35:19.867398+02:00 kiste systemd[1898]: Reached target Paths. 2019-10-08T13:35:19.867823+02:00 kiste systemd[1898]: Reached target Timers. 2019-10-08T13:35:19.871844+02:00 kiste systemd[1898]: Starting D-Bus User Message Bus Socket. 2019-10-08T13:35:19.882726+02:00 kiste systemd[1898]: Listening on D-Bus User Message Bus Socket. 2019-10-08T13:35:19.883092+02:00 kiste systemd[1898]: Reached target Sockets. 2019-10-08T13:35:19.883396+02:00 kiste systemd[1898]: Reached target Basic System. 2019-10-08T13:35:19.883687+02:00 kiste systemd[1]: Started User Manager for UID 466. 2019-10-08T13:35:19.885024+02:00 kiste systemd[1898]: Reached target Default. 2019-10-08T13:35:19.885402+02:00 kiste systemd[1898]: Startup finished in 465ms. 2019-10-08T13:35:19.886071+02:00 kiste sddm-helper: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0) 2019-10-08T13:35:19.923721+02:00 kiste sddm[1632]: Greeter session started successfully 2019-10-08T13:35:20.285814+02:00 kiste sddm-greeter[1907]: High-DPI autoscaling Enabled 2019-10-08T13:35:20.908362+02:00 kiste sddm-greeter[1907]: Reading from "/usr/share/xsessions/icewm.desktop" 2019-10-08T13:35:20.915208+02:00 kiste sddm-greeter[1907]: Reading from "/usr/share/xsessions/plasma5.desktop" 2019-10-08T13:35:20.915537+02:00 kiste sddm-greeter[1907]: Reading from "/usr/share/xsessions/twm.desktop" 2019-10-08T13:35:20.932063+02:00 kiste sddm-greeter[1907]: Reading from "/usr/share/wayland-sessions/plasmawayland.desktop" 2019-10-08T13:35:20.933421+02:00 kiste sddm-greeter[1907]: Loading theme configuration from "/usr/share/sddm/themes/breeze-openSUSE/theme.conf" 2019-10-08T13:35:20.936324+02:00 kiste systemd[1898]: Started D-Bus User Message Bus. 2019-10-08T13:35:21.169366+02:00 kiste sddm-greeter[1907]: Connected to the daemon. 2019-10-08T13:35:21.169847+02:00 kiste sddm[1632]: Message received from greeter: Connect 2019-10-08T13:35:21.630264+02:00 kiste sddm-greeter[1907]: Loading file:///usr/share/sddm/themes/breeze-openSUSE/Main.qml... 2019-10-08T13:35:22.000177+02:00 kiste avahi-daemon[1253]: Joining mDNS multicast group on interface eth0.IPv4 with address 10.116.41.67. 2019-10-08T13:35:22.000714+02:00 kiste avahi-daemon[1253]: New relevant interface eth0.IPv4 for mDNS. 2019-10-08T13:35:22.001214+02:00 kiste avahi-daemon[1253]: Registering new address record for 10.116.41.67 on eth0.IPv4. 2019-10-08T13:35:23.254576+02:00 kiste sddm-greeter[1907]: QObject: Cannot create children for a parent that is in a different thread.#012(Parent is QGuiApplication(0x7ffd767832b0), parent's thread is QThread(0x55d8029640f0), current thread is QThread(0x55d802a625b0) 2019-10-08T13:35:23.426199+02:00 kiste sddm-greeter[1907]: message repeated 2 times: [ QObject: Cannot create children for a parent that is in a different thread.#012(Parent is QGuiApplication(0x7ffd767832b0), parent's thread is QThread(0x55d8029640f0), current thread is QThread(0x55d802a625b0)] 2019-10-08T13:35:23.426691+02:00 kiste sddm-greeter[1907]: QObject::installEventFilter(): Cannot filter events for objects in a different thread. 2019-10-08T13:35:23.774088+02:00 kiste dbus-daemon[1150]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.7' (uid=0 pid=1416 comm="/usr/sbin/NetworkManager --no-daemon ") 2019-10-08T13:35:23.778716+02:00 kiste systemd[1]: Starting Network Manager Script Dispatcher Service... 2019-10-08T13:35:23.796683+02:00 kiste dbus-daemon[1150]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 2019-10-08T13:35:23.798023+02:00 kiste systemd[1]: Started Network Manager Script Dispatcher Service. 2019-10-08T13:35:25.726735+02:00 kiste nmbd[1457]: [2019/10/08 13:35:25.724150, 0] ../lib/util/become_daemon.c:138(daemon_ready) 2019-10-08T13:35:25.727121+02:00 kiste systemd[1]: Started Samba NMB Daemon. 2019-10-08T13:35:25.727373+02:00 kiste nmbd[1457]: daemon_ready: STATUS=daemon 'nmbd' finished starting up and ready to serve connections 2019-10-08T13:35:25.727623+02:00 kiste systemd[1]: Starting Samba SMB Daemon... 2019-10-08T13:35:26.528968+02:00 kiste systemd[1]: Started Do daily mandb update. 2019-10-08T13:35:27.646114+02:00 kiste systemd[1]: Started Samba SMB Daemon. 2019-10-08T13:35:27.657520+02:00 kiste smbd[2073]: [2019/10/08 13:35:27.647886, 0] ../lib/util/become_daemon.c:138(daemon_ready) 2019-10-08T13:35:27.657900+02:00 kiste smbd[2073]: daemon_ready: STATUS=daemon 'smbd' finished starting up and ready to serve connections 2019-10-08T13:35:28.580437+02:00 kiste dbus-daemon[1150]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service' requested by ':1.18' (uid=466 pid=1907 comm="/usr/bin/sddm-greeter --socket /tmp/sddm-:0-AFAhGT") 2019-10-08T13:35:28.597525+02:00 kiste systemd[1]: Starting Disk Manager... 2019-10-08T13:35:28.663717+02:00 kiste udisksd[2080]: udisks daemon version 2.6.5 starting 2019-10-08T13:35:28.681463+02:00 kiste udisksd[2080]: Can't load configuration file /etc/udisks2/udisks2.conf 2019-10-08T13:35:28.836546+02:00 kiste dbus-daemon[1150]: [system] Successfully activated service 'org.freedesktop.UDisks2' 2019-10-08T13:35:28.839893+02:00 kiste systemd[1]: Started Disk Manager. 2019-10-08T13:35:28.840974+02:00 kiste dbus-daemon[1150]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service' requested by ':1.18' (uid=466 pid=1907 comm="/usr/bin/sddm-greeter --socket /tmp/sddm-:0-AFAhGT") 2019-10-08T13:35:28.841593+02:00 kiste udisksd[2080]: Acquired the name org.freedesktop.UDisks2 on the system message bus 2019-10-08T13:35:28.864286+02:00 kiste systemd[1]: Starting Daemon for power management... 2019-10-08T13:35:29.349177+02:00 kiste dbus-daemon[1150]: [system] Successfully activated service 'org.freedesktop.UPower' 2019-10-08T13:35:29.350963+02:00 kiste systemd[1]: Started Daemon for power management. 2019-10-08T13:35:32.886654+02:00 kiste sddm-greeter[1907]: Adding view for "DVI-I-1" QRect(0,0 1920x1200) 2019-10-08T13:35:34.114542+02:00 kiste sddm-greeter[1907]: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.19' 2019-10-08T13:35:34.177210+02:00 kiste sddm-greeter[1907]: Message received from daemon: Capabilities 2019-10-08T13:35:34.177664+02:00 kiste sddm-greeter[1907]: Message received from daemon: HostName 2019-10-08T13:35:37.213857+02:00 kiste [RPM][2122]: Transaction ID 5d9c7489 started 2019-10-08T13:35:47.009586+02:00 kiste [RPM][2122]: erase kernel-default-4.12.14-lp151.28.7.1.x86_64: success 2019-10-08T13:35:48.592374+02:00 kiste login: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=tty1 ruser= rhost= user=root 2019-10-08T13:35:50.135875+02:00 kiste login: FAILED LOGIN 1 FROM tty1 FOR root, Authentication failure 2019-10-08T13:35:50.895103+02:00 kiste nmbd[1457]: [2019/10/08 13:35:50.894192, 0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2) 2019-10-08T13:35:50.895482+02:00 kiste nmbd[1457]: ***** 2019-10-08T13:35:50.895740+02:00 kiste nmbd[1457]: 2019-10-08T13:35:50.895990+02:00 kiste nmbd[1457]: Samba name server KISTE is now a local master browser for workgroup TUX-NET on subnet 10.116.41.67 2019-10-08T13:35:50.896226+02:00 kiste nmbd[1457]: 2019-10-08T13:35:50.896458+02:00 kiste nmbd[1457]: ***** 2019-10-08T13:35:54.413249+02:00 kiste dbus-daemon[1150]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.7' (uid=0 pid=1416 comm="/usr/sbin/NetworkManager --no-daemon ") 2019-10-08T13:35:54.423850+02:00 kiste systemd[1]: Starting Network Manager Script Dispatcher Service... 2019-10-08T13:35:54.434078+02:00 kiste dbus-daemon[1150]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 2019-10-08T13:35:54.489920+02:00 kiste systemd[1]: Started Network Manager Script Dispatcher Service. 2019-10-08T13:35:56.735740+02:00 kiste kernel: [ 148.326393] fuse init (API version 7.26) 2019-10-08T13:35:56.740078+02:00 kiste systemd[1]: Mounting FUSE Control File System... 2019-10-08T13:35:56.749373+02:00 kiste systemd[1]: Mounted FUSE Control File System. 2019-10-08T13:35:58.577553+02:00 kiste login: FAILED LOGIN 2 FROM tty1 FOR root, Authentication failure 2019-10-08T13:35:59.195743+02:00 kiste kernel: [ 150.785099] sr 1:0:0:0: [sr0] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 2019-10-08T13:35:59.195758+02:00 kiste kernel: [ 150.785104] sr 1:0:0:0: [sr0] tag#19 Sense Key : Illegal Request [current] 2019-10-08T13:35:59.195761+02:00 kiste kernel: [ 150.785108] sr 1:0:0:0: [sr0] tag#19 Add. Sense: Illegal mode for this track 2019-10-08T13:35:59.195763+02:00 kiste kernel: [ 150.785112] sr 1:0:0:0: [sr0] tag#19 CDB: Read(10) 28 00 00 03 98 00 00 00 02 00 2019-10-08T13:35:59.195767+02:00 kiste kernel: [ 150.785115] print_req_error: I/O error, dev sr0, sector 942080 2019-10-08T13:35:59.315741+02:00 kiste kernel: [ 150.905889] sr 1:0:0:0: [sr0] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 2019-10-08T13:35:59.315755+02:00 kiste kernel: [ 150.905892] sr 1:0:0:0: [sr0] tag#20 Sense Key : Illegal Request [current] 2019-10-08T13:35:59.315757+02:00 kiste kernel: [ 150.905897] sr 1:0:0:0: [sr0] tag#20 Add. Sense: Illegal mode for this track 2019-10-08T13:35:59.315759+02:00 kiste kernel: [ 150.905900] sr 1:0:0:0: [sr0] tag#20 CDB: Read(10) 28 00 00 03 98 00 00 00 02 00 2019-10-08T13:35:59.315761+02:00 kiste kernel: [ 150.905902] print_req_error: I/O error, dev sr0, sector 942080 2019-10-08T13:35:59.315762+02:00 kiste kernel: [ 150.905905] Buffer I/O error on dev sr0, logical block 117760, async page read 2019-10-08T13:36:00.794947+02:00 kiste os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda10 2019-10-08T13:36:00.828743+02:00 kiste 50mounted-tests: debug: /dev/sda10 is a LUKS partition; skipping 2019-10-08T13:36:00.832050+02:00 kiste os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests 2019-10-08T13:36:00.862411+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/05efi on mounted /dev/sda2 2019-10-08T13:36:00.874315+02:00 kiste 05efi: debug: Not on UEFI platform 2019-10-08T13:36:00.877794+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/10freedos on mounted /dev/sda2 2019-10-08T13:36:00.885314+02:00 kiste 10freedos: debug: /dev/sda2 is not a FAT partition: exiting 2019-10-08T13:36:00.888860+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/10qnx on mounted /dev/sda2 2019-10-08T13:36:00.896476+02:00 kiste 10qnx: debug: /dev/sda2 is not a QNX4 partition: exiting 2019-10-08T13:36:00.900088+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/20macosx on mounted /dev/sda2 2019-10-08T13:36:00.907742+02:00 kiste macosx-prober: debug: /dev/sda2 is not an HFS+ partition: exiting 2019-10-08T13:36:00.911250+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/20microsoft on mounted /dev/sda2 2019-10-08T13:36:00.919087+02:00 kiste 20microsoft: debug: /dev/sda2 is not a MS partition: exiting 2019-10-08T13:36:00.922621+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/30utility on mounted /dev/sda2 2019-10-08T13:36:00.930231+02:00 kiste 30utility: debug: /dev/sda2 is not a FAT partition: exiting 2019-10-08T13:36:00.933766+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/40lsb on mounted /dev/sda2 2019-10-08T13:36:00.941994+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/70hurd on mounted /dev/sda2 2019-10-08T13:36:00.950128+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/80minix on mounted /dev/sda2 2019-10-08T13:36:00.964139+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/83haiku on mounted /dev/sda2 2019-10-08T13:36:00.973654+02:00 kiste 83haiku: debug: /dev/sda2 is not a BeFS partition: exiting 2019-10-08T13:36:00.976990+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/90linux-distro on mounted /dev/sda2 2019-10-08T13:36:00.987795+02:00 kiste os-prober: debug: running /usr/lib/os-probes/mounted/90solaris on mounted /dev/sda2 2019-10-08T13:36:01.083123+02:00 kiste os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda3 2019-10-08T13:36:01.754612+02:00 kiste 50mounted-tests: debug: mounted using GRUB ext2 filesystem driver 2019-10-08T13:36:01.758179+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/05efi 2019-10-08T13:36:01.765753+02:00 kiste 05efi: debug: Not on UEFI platform 2019-10-08T13:36:01.769111+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10freedos 2019-10-08T13:36:01.776428+02:00 kiste 10freedos: debug: /dev/sda3 is not a FAT partition: exiting 2019-10-08T13:36:01.779633+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10qnx 2019-10-08T13:36:01.786960+02:00 kiste 10qnx: debug: /dev/sda3 is not a QNX4 partition: exiting 2019-10-08T13:36:01.790249+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20macosx 2019-10-08T13:36:01.797636+02:00 kiste macosx-prober: debug: /dev/sda3 is not an HFS+ partition: exiting 2019-10-08T13:36:01.801057+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20microsoft 2019-10-08T13:36:01.808467+02:00 kiste 20microsoft: debug: /dev/sda3 is not a MS partition: exiting 2019-10-08T13:36:01.811658+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/30utility 2019-10-08T13:36:01.819012+02:00 kiste 30utility: debug: /dev/sda3 is not a FAT partition: exiting 2019-10-08T13:36:01.822242+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/40lsb 2019-10-08T13:36:01.845454+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/70hurd 2019-10-08T13:36:01.853185+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/80minix 2019-10-08T13:36:01.861111+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/83haiku 2019-10-08T13:36:01.868334+02:00 kiste 83haiku: debug: /dev/sda3 is not a BeFS partition: exiting 2019-10-08T13:36:01.871550+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90linux-distro 2019-10-08T13:36:01.885187+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90solaris 2019-10-08T13:36:01.893434+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/efi 2019-10-08T13:36:01.905467+02:00 kiste nmbd[1457]: [2019/10/08 13:36:01.905325, 0] ../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail) 2019-10-08T13:36:01.905837+02:00 kiste nmbd[1457]: find_domain_master_name_query_fail: 2019-10-08T13:36:01.906082+02:00 kiste nmbd[1457]: Unable to find the Domain Master Browser name TUX-NET<1b> for the workgroup TUX-NET. 2019-10-08T13:36:01.906353+02:00 kiste nmbd[1457]: Unable to sync browse lists in this workgroup. 2019-10-08T13:36:02.000008+02:00 kiste os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda4 2019-10-08T13:36:02.017944+02:00 kiste 50mounted-tests: debug: /dev/sda4 type not recognised; skipping 2019-10-08T13:36:02.021411+02:00 kiste os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests 2019-10-08T13:36:02.103099+02:00 kiste os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda5 2019-10-08T13:36:02.603493+02:00 kiste 50mounted-tests: debug: mounted using GRUB ext2 filesystem driver 2019-10-08T13:36:02.607095+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/05efi 2019-10-08T13:36:02.614739+02:00 kiste 05efi: debug: Not on UEFI platform 2019-10-08T13:36:02.617985+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10freedos 2019-10-08T13:36:02.625590+02:00 kiste 10freedos: debug: /dev/sda5 is not a FAT partition: exiting 2019-10-08T13:36:02.628939+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10qnx 2019-10-08T13:36:02.636345+02:00 kiste 10qnx: debug: /dev/sda5 is not a QNX4 partition: exiting 2019-10-08T13:36:02.639774+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20macosx 2019-10-08T13:36:02.647040+02:00 kiste macosx-prober: debug: /dev/sda5 is not an HFS+ partition: exiting 2019-10-08T13:36:02.650281+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20microsoft 2019-10-08T13:36:02.657843+02:00 kiste 20microsoft: debug: /dev/sda5 is not a MS partition: exiting 2019-10-08T13:36:02.661156+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/30utility 2019-10-08T13:36:02.668556+02:00 kiste 30utility: debug: /dev/sda5 is not a FAT partition: exiting 2019-10-08T13:36:02.671983+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/40lsb 2019-10-08T13:36:02.809204+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/70hurd 2019-10-08T13:36:02.882565+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/80minix 2019-10-08T13:36:02.904418+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/83haiku 2019-10-08T13:36:02.911632+02:00 kiste 83haiku: debug: /dev/sda5 is not a BeFS partition: exiting 2019-10-08T13:36:02.914886+02:00 kiste 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90linux-distro 2019-10-08T13:36:02.988729+02:00 kiste 90linux-distro: result: /dev/sda5:openSUSE Leap 15.1:openSUSE:linux 2019-10-08T13:36:02.992066+02:00 kiste 50mounted-tests: debug: os found by subtest /usr/lib/os-probes/mounted/90linux-distro 2019-10-08T13:36:03.003944+02:00 kiste os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests 2019-10-08T13:36:03.091374+02:00 kiste os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda6 2019-10-08T13:36:03.106500+02:00 kiste 50mounted-tests: debug: /dev/sda6 is a LUKS partition; skipping 2019-10-08T13:36:03.110016+02:00 kiste os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests 2019-10-08T13:36:03.187464+02:00 kiste os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda7 2019-10-08T13:36:03.207625+02:00 kiste 50mounted-tests: debug: /dev/sda7 type not recognised; skipping 2019-10-08T13:36:03.210944+02:00 kiste os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests 2019-10-08T13:36:03.232898+02:00 kiste os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda8 2019-10-08T13:36:03.246690+02:00 kiste 50mounted-tests: debug: /dev/sda8 is a LUKS partition; skipping 2019-10-08T13:36:03.250001+02:00 kiste os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests 2019-10-08T13:36:03.275939+02:00 kiste os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda9 2019-10-08T13:36:03.299443+02:00 kiste 50mounted-tests: debug: /dev/sda9 is a LUKS partition; skipping 2019-10-08T13:36:03.302920+02:00 kiste os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests 2019-10-08T13:36:03.689347+02:00 kiste linux-boot-prober: debug: running /usr/lib/linux-boot-probes/50mounted-tests 2019-10-08T13:36:04.943742+02:00 kiste kernel: [ 156.532331] sr 1:0:0:0: [sr0] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 2019-10-08T13:36:04.943773+02:00 kiste kernel: [ 156.532334] sr 1:0:0:0: [sr0] tag#28 Sense Key : Illegal Request [current] 2019-10-08T13:36:04.943775+02:00 kiste kernel: [ 156.532338] sr 1:0:0:0: [sr0] tag#28 Add. Sense: Illegal mode for this track 2019-10-08T13:36:04.943777+02:00 kiste kernel: [ 156.532342] sr 1:0:0:0: [sr0] tag#28 CDB: Read(10) 28 00 00 03 98 00 00 00 02 00 2019-10-08T13:36:04.943779+02:00 kiste kernel: [ 156.532344] print_req_error: I/O error, dev sr0, sector 942080 2019-10-08T13:36:05.075741+02:00 kiste kernel: [ 156.665417] sr 1:0:0:0: [sr0] tag#29 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 2019-10-08T13:36:05.075753+02:00 kiste kernel: [ 156.665420] sr 1:0:0:0: [sr0] tag#29 Sense Key : Illegal Request [current] 2019-10-08T13:36:05.075756+02:00 kiste kernel: [ 156.665424] sr 1:0:0:0: [sr0] tag#29 Add. Sense: Illegal mode for this track 2019-10-08T13:36:05.075759+02:00 kiste kernel: [ 156.665428] sr 1:0:0:0: [sr0] tag#29 CDB: Read(10) 28 00 00 03 98 00 00 00 02 00 2019-10-08T13:36:05.075761+02:00 kiste kernel: [ 156.665430] print_req_error: I/O error, dev sr0, sector 942080 2019-10-08T13:36:05.075763+02:00 kiste kernel: [ 156.665432] Buffer I/O error on dev sr0, logical block 117760, async page read 2019-10-08T13:36:05.966121+02:00 kiste systemd[1]: Created slice User Slice of root. 2019-10-08T13:36:05.991129+02:00 kiste systemd[1]: Starting User Manager for UID 0... 2019-10-08T13:36:06.000842+02:00 kiste systemd-logind[1269]: New session 2 of user root. 2019-10-08T13:36:06.002291+02:00 kiste systemd[1]: Started Session 2 of user root. 2019-10-08T13:36:06.004650+02:00 kiste systemd: pam_unix(systemd-user:session): session opened for user root by (uid=0) 2019-10-08T13:36:06.125166+02:00 kiste systemd[3228]: Starting D-Bus User Message Bus Socket. 2019-10-08T13:36:06.125554+02:00 kiste systemd[3228]: Reached target Paths. 2019-10-08T13:36:06.125838+02:00 kiste systemd[3228]: Reached target Timers. 2019-10-08T13:36:06.139400+02:00 kiste systemd[3228]: Listening on D-Bus User Message Bus Socket. 2019-10-08T13:36:06.139830+02:00 kiste systemd[3228]: Reached target Sockets. 2019-10-08T13:36:06.140138+02:00 kiste systemd[3228]: Reached target Basic System. 2019-10-08T13:36:06.140422+02:00 kiste systemd[1]: Started User Manager for UID 0. 2019-10-08T13:36:06.142301+02:00 kiste login: pam_unix(login:session): session opened for user root by LOGIN(uid=0) 2019-10-08T13:36:06.142686+02:00 kiste systemd[3228]: Reached target Default. 2019-10-08T13:36:06.143011+02:00 kiste systemd[3228]: Startup finished in 128ms. 2019-10-08T13:36:06.218702+02:00 kiste 50mounted-tests: debug: mapped UUID=2c080be0-510c-4ca8-a7b4-f7e249922090 to /dev/sda2 2019-10-08T13:36:06.603991+02:00 kiste 50mounted-tests: debug: running /usr/lib/linux-boot-probes/mounted/40grub /dev/sda5 /dev/sda2 /tmp/linux-boot-probes-50mounted-tests.DpPRYX ext2 2019-10-08T13:36:06.650483+02:00 kiste 50mounted-tests: debug: running /usr/lib/linux-boot-probes/mounted/40grub2 /dev/sda5 /dev/sda2 /tmp/linux-boot-probes-50mounted-tests.DpPRYX ext2 2019-10-08T13:36:06.701104+02:00 kiste 40grub2: debug: parsing grub.cfg 2019-10-08T13:36:06.713026+02:00 kiste 40grub2: debug: parsing: # 2019-10-08T13:36:06.716008+02:00 kiste 40grub2: debug: parsing: # DO NOT EDIT THIS FILE 2019-10-08T13:36:06.718919+02:00 kiste 40grub2: debug: parsing: # 2019-10-08T13:36:06.721998+02:00 kiste 40grub2: debug: parsing: # It is automatically generated by grub2-mkconfig using templates 2019-10-08T13:36:06.724984+02:00 kiste 40grub2: debug: parsing: # from /etc/grub.d and settings from /etc/default/grub 2019-10-08T13:36:06.727908+02:00 kiste 40grub2: debug: parsing: # 2019-10-08T13:36:06.730773+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.733796+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/00_header ### 2019-10-08T13:36:06.736762+02:00 kiste 40grub2: debug: parsing: if [ -f ${config_directory}/grubenv ]; then 2019-10-08T13:36:06.739685+02:00 kiste 40grub2: debug: parsing: load_env -f ${config_directory}/grubenv 2019-10-08T13:36:06.742706+02:00 kiste 40grub2: debug: parsing: elif [ -s $prefix/grubenv ]; then 2019-10-08T13:36:06.743160+02:00 kiste login: ROOT LOGIN ON tty1 2019-10-08T13:36:06.746450+02:00 kiste 40grub2: debug: parsing: load_env 2019-10-08T13:36:06.749432+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.752351+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.755559+02:00 kiste 40grub2: debug: parsing: if [ "${env_block}" ] ; then 2019-10-08T13:36:06.759403+02:00 kiste 40grub2: debug: parsing: set env_block="(${root})${env_block}" 2019-10-08T13:36:06.762968+02:00 kiste 40grub2: debug: parsing: export env_block 2019-10-08T13:36:06.765941+02:00 kiste 40grub2: debug: parsing: load_env -f "${env_block}" 2019-10-08T13:36:06.768859+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.771824+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.774714+02:00 kiste 40grub2: debug: parsing: if [ "${next_entry}" ] ; then 2019-10-08T13:36:06.777636+02:00 kiste 40grub2: debug: parsing: set default="${next_entry}" 2019-10-08T13:36:06.780632+02:00 kiste 40grub2: debug: parsing: set next_entry= 2019-10-08T13:36:06.783570+02:00 kiste 40grub2: debug: parsing: save_env next_entry 2019-10-08T13:36:06.786543+02:00 kiste 40grub2: debug: parsing: if [ "${env_block}" ] ; then 2019-10-08T13:36:06.789614+02:00 kiste 40grub2: debug: parsing: save_env -f "${env_block}" next_entry 2019-10-08T13:36:06.792564+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.795420+02:00 kiste 40grub2: debug: parsing: set boot_once=true 2019-10-08T13:36:06.798371+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:06.801295+02:00 kiste 40grub2: debug: parsing: set default="${saved_entry}" 2019-10-08T13:36:06.804303+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.807189+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.810122+02:00 kiste 40grub2: debug: parsing: if [ x"${feature_menuentry_id}" = xy ]; then 2019-10-08T13:36:06.813100+02:00 kiste 40grub2: debug: parsing: menuentry_id_option="--id" 2019-10-08T13:36:06.816118+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:06.819010+02:00 kiste 40grub2: debug: parsing: menuentry_id_option="" 2019-10-08T13:36:06.821929+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.824900+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.827842+02:00 kiste 40grub2: debug: parsing: export menuentry_id_option 2019-10-08T13:36:06.830761+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.833683+02:00 kiste 40grub2: debug: parsing: if [ "${prev_saved_entry}" ]; then 2019-10-08T13:36:06.836620+02:00 kiste 40grub2: debug: parsing: set saved_entry="${prev_saved_entry}" 2019-10-08T13:36:06.839526+02:00 kiste 40grub2: debug: parsing: save_env saved_entry 2019-10-08T13:36:06.842472+02:00 kiste 40grub2: debug: parsing: set prev_saved_entry= 2019-10-08T13:36:06.845425+02:00 kiste 40grub2: debug: parsing: save_env prev_saved_entry 2019-10-08T13:36:06.848402+02:00 kiste 40grub2: debug: parsing: set boot_once=true 2019-10-08T13:36:06.851313+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.854302+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.857191+02:00 kiste 40grub2: debug: parsing: function savedefault { 2019-10-08T13:36:06.860125+02:00 kiste 40grub2: debug: parsing: if [ -z "${boot_once}" ]; then 2019-10-08T13:36:06.863027+02:00 kiste 40grub2: debug: parsing: saved_entry="${chosen}" 2019-10-08T13:36:06.865974+02:00 kiste 40grub2: debug: parsing: if [ "${env_block}" ] ; then 2019-10-08T13:36:06.868895+02:00 kiste 40grub2: debug: parsing: save_env -f "${env_block}" saved_entry 2019-10-08T13:36:06.871879+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:06.874791+02:00 kiste 40grub2: debug: parsing: save_env saved_entry 2019-10-08T13:36:06.877751+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.880680+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.883559+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.886476+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:06.889509+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.892491+02:00 kiste 40grub2: debug: parsing: function load_video { 2019-10-08T13:36:06.895405+02:00 kiste 40grub2: debug: parsing: if [ x$feature_all_video_module = xy ]; then 2019-10-08T13:36:06.898352+02:00 kiste 40grub2: debug: parsing: insmod all_video 2019-10-08T13:36:06.901273+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:06.904210+02:00 kiste 40grub2: debug: parsing: insmod efi_gop 2019-10-08T13:36:06.907116+02:00 kiste 40grub2: debug: parsing: insmod efi_uga 2019-10-08T13:36:06.910091+02:00 kiste 40grub2: debug: parsing: insmod ieee1275_fb 2019-10-08T13:36:06.913091+02:00 kiste 40grub2: debug: parsing: insmod vbe 2019-10-08T13:36:06.916112+02:00 kiste 40grub2: debug: parsing: insmod vga 2019-10-08T13:36:06.919008+02:00 kiste 40grub2: debug: parsing: insmod video_bochs 2019-10-08T13:36:06.922016+02:00 kiste 40grub2: debug: parsing: insmod video_cirrus 2019-10-08T13:36:06.924932+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.927866+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:06.930830+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:06.933804+02:00 kiste 40grub2: debug: parsing: if loadfont unicode ; then 2019-10-08T13:36:06.936749+02:00 kiste 40grub2: debug: parsing: set gfxmode=auto 2019-10-08T13:36:06.939763+02:00 kiste 40grub2: debug: parsing: load_video 2019-10-08T13:36:06.942714+02:00 kiste 40grub2: debug: parsing: insmod gfxterm 2019-10-08T13:36:06.945718+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.948692+02:00 kiste 40grub2: debug: parsing: terminal_output gfxterm 2019-10-08T13:36:06.951570+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:06.954567+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:06.957565+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:06.960556+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:06.963501+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:06.966480+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:06.969433+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:06.972386+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:06.975271+02:00 kiste 40grub2: debug: parsing: insmod gfxmenu 2019-10-08T13:36:06.978280+02:00 kiste 40grub2: debug: parsing: loadfont ($root)/grub2/themes/openSUSE/DejaVuSans-Bold14.pf2 2019-10-08T13:36:06.981251+02:00 kiste 40grub2: debug: parsing: loadfont ($root)/grub2/themes/openSUSE/DejaVuSans10.pf2 2019-10-08T13:36:06.984191+02:00 kiste 40grub2: debug: parsing: loadfont ($root)/grub2/themes/openSUSE/DejaVuSans12.pf2 2019-10-08T13:36:06.987092+02:00 kiste 40grub2: debug: parsing: loadfont ($root)/grub2/themes/openSUSE/ascii.pf2 2019-10-08T13:36:06.990043+02:00 kiste 40grub2: debug: parsing: insmod png 2019-10-08T13:36:06.993157+02:00 kiste 40grub2: debug: parsing: set theme=($root)/grub2/themes/openSUSE/theme.txt 2019-10-08T13:36:06.996204+02:00 kiste 40grub2: debug: parsing: export theme 2019-10-08T13:36:06.999102+02:00 kiste 40grub2: debug: parsing: if [ x${boot_once} = xtrue ]; then 2019-10-08T13:36:07.002036+02:00 kiste 40grub2: debug: parsing: set timeout=0 2019-10-08T13:36:07.005033+02:00 kiste 40grub2: debug: parsing: elif [ x$feature_timeout_style = xy ] ; then 2019-10-08T13:36:07.007962+02:00 kiste 40grub2: debug: parsing: set timeout_style=menu 2019-10-08T13:36:07.010834+02:00 kiste 40grub2: debug: parsing: set timeout=2 2019-10-08T13:36:07.013819+02:00 kiste 40grub2: debug: parsing: # Fallback normal timeout code in case the timeout_style feature is 2019-10-08T13:36:07.016789+02:00 kiste 40grub2: debug: parsing: # unavailable. 2019-10-08T13:36:07.019682+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.022603+02:00 kiste 40grub2: debug: parsing: set timeout=2 2019-10-08T13:36:07.025533+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.028486+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/00_header ### 2019-10-08T13:36:07.031388+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:07.034298+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/00_tuned ### 2019-10-08T13:36:07.037344+02:00 kiste 40grub2: debug: parsing: set tuned_params="" 2019-10-08T13:36:07.040324+02:00 kiste 40grub2: debug: parsing: set tuned_initrd="" 2019-10-08T13:36:07.043250+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/00_tuned ### 2019-10-08T13:36:07.046219+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:07.049142+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/10_linux ### 2019-10-08T13:36:07.052118+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 ' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-12c94c4b-cbe9-46f9-9bc4-4b984a202901' { 2019-10-08T13:36:07.069349+02:00 kiste 40grub2: debug: parsing: load_video 2019-10-08T13:36:07.072541+02:00 kiste 40grub2: debug: parsing: set gfxpayload=keep 2019-10-08T13:36:07.075680+02:00 kiste 40grub2: debug: parsing: insmod gzio 2019-10-08T13:36:07.078814+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.081935+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.085104+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.088306+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.091439+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.094681+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.097830+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.100961+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.104133+02:00 kiste 40grub2: debug: parsing: echo#011'Loading Linux 4.12.14-lp151.28.16-default ...' 2019-10-08T13:36:07.107297+02:00 kiste 40grub2: debug: parsing: linux#011/vmlinuz-4.12.14-lp151.28.16-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.113550+02:00 kiste 40grub2: debug: parsing: echo#011'Loading initial ramdisk ...' 2019-10-08T13:36:07.116517+02:00 kiste 40grub2: debug: parsing: initrd#011/initrd-4.12.14-lp151.28.16-default 2019-10-08T13:36:07.125741+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.128962+02:00 kiste 40grub2: result: /dev/sda5:/dev/sda2:openSUSE Leap 15.1 :/boot/vmlinuz-4.12.14-lp151.28.16-default:/boot/initrd-4.12.14-lp151.28.16-default:root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.132227+02:00 kiste 40grub2: debug: parsing: submenu 'Advanced options for openSUSE Leap 15.1 ' --hotkey=1 $menuentry_id_option 'gnulinux-advanced-12c94c4b-cbe9-46f9-9bc4-4b984a202901' { 2019-10-08T13:36:07.135394+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.16-default' --hotkey=2 --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.12.14-lp151.28.16-default-advanced-12c94c4b-cbe9-46f9-9bc4-4b984a202901' { 2019-10-08T13:36:07.153168+02:00 kiste 40grub2: debug: parsing: load_video 2019-10-08T13:36:07.156320+02:00 kiste 40grub2: debug: parsing: set gfxpayload=keep 2019-10-08T13:36:07.159403+02:00 kiste 40grub2: debug: parsing: insmod gzio 2019-10-08T13:36:07.162523+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.165656+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.168830+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.172066+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.175333+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.178515+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.181666+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.184818+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.188054+02:00 kiste 40grub2: debug: parsing: echo#011'Loading Linux 4.12.14-lp151.28.16-default ...' 2019-10-08T13:36:07.191192+02:00 kiste 40grub2: debug: parsing: linux#011/vmlinuz-4.12.14-lp151.28.16-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.197498+02:00 kiste 40grub2: debug: parsing: echo#011'Loading initial ramdisk ...' 2019-10-08T13:36:07.200568+02:00 kiste 40grub2: debug: parsing: initrd#011/initrd-4.12.14-lp151.28.16-default 2019-10-08T13:36:07.209716+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.212914+02:00 kiste 40grub2: result: /dev/sda5:/dev/sda2:openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.16-default:/boot/vmlinuz-4.12.14-lp151.28.16-default:/boot/initrd-4.12.14-lp151.28.16-default:root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.216104+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.16-default (recovery mode)' --hotkey=3 --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.12.14-lp151.28.16-default-recovery-12c94c4b-cbe9-46f9-9bc4-4b984a202901' { 2019-10-08T13:36:07.234058+02:00 kiste 40grub2: debug: parsing: load_video 2019-10-08T13:36:07.237286+02:00 kiste 40grub2: debug: parsing: set gfxpayload=keep 2019-10-08T13:36:07.240491+02:00 kiste 40grub2: debug: parsing: insmod gzio 2019-10-08T13:36:07.243596+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.246674+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.249754+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.252731+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.255872+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.258953+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.262086+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.265186+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.268291+02:00 kiste 40grub2: debug: parsing: echo#011'Loading Linux 4.12.14-lp151.28.16-default ...' 2019-10-08T13:36:07.271398+02:00 kiste 40grub2: debug: parsing: linux#011/vmlinuz-4.12.14-lp151.28.16-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 2019-10-08T13:36:07.277661+02:00 kiste 40grub2: debug: parsing: echo#011'Loading initial ramdisk ...' 2019-10-08T13:36:07.280656+02:00 kiste 40grub2: debug: parsing: initrd#011/initrd-4.12.14-lp151.28.16-default 2019-10-08T13:36:07.290036+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.293222+02:00 kiste 40grub2: result: /dev/sda5:/dev/sda2:openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.16-default (recovery mode):/boot/vmlinuz-4.12.14-lp151.28.16-default:/boot/initrd-4.12.14-lp151.28.16-default:root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 2019-10-08T13:36:07.296372+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.13-default' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.12.14-lp151.28.13-default-advanced-12c94c4b-cbe9-46f9-9bc4-4b984a202901' { 2019-10-08T13:36:07.313994+02:00 kiste 40grub2: debug: parsing: load_video 2019-10-08T13:36:07.317083+02:00 kiste 40grub2: debug: parsing: set gfxpayload=keep 2019-10-08T13:36:07.320140+02:00 kiste 40grub2: debug: parsing: insmod gzio 2019-10-08T13:36:07.323234+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.326347+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.329487+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.332642+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.335825+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.338908+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.341869+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.345099+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.348265+02:00 kiste 40grub2: debug: parsing: echo#011'Loading Linux 4.12.14-lp151.28.13-default ...' 2019-10-08T13:36:07.351369+02:00 kiste 40grub2: debug: parsing: linux#011/vmlinuz-4.12.14-lp151.28.13-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.357693+02:00 kiste 40grub2: debug: parsing: echo#011'Loading initial ramdisk ...' 2019-10-08T13:36:07.360649+02:00 kiste 40grub2: debug: parsing: initrd#011/initrd-4.12.14-lp151.28.13-default 2019-10-08T13:36:07.369947+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.373178+02:00 kiste 40grub2: result: /dev/sda5:/dev/sda2:openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.13-default:/boot/vmlinuz-4.12.14-lp151.28.13-default:/boot/initrd-4.12.14-lp151.28.13-default:root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.376362+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.13-default (recovery mode)' --hotkey=1 --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.12.14-lp151.28.13-default-recovery-12c94c4b-cbe9-46f9-9bc4-4b984a202901' { 2019-10-08T13:36:07.394090+02:00 kiste 40grub2: debug: parsing: load_video 2019-10-08T13:36:07.397257+02:00 kiste 40grub2: debug: parsing: set gfxpayload=keep 2019-10-08T13:36:07.400329+02:00 kiste 40grub2: debug: parsing: insmod gzio 2019-10-08T13:36:07.403403+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.406535+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.409619+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.412762+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.415896+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.419012+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.422215+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.425309+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.428461+02:00 kiste 40grub2: debug: parsing: echo#011'Loading Linux 4.12.14-lp151.28.13-default ...' 2019-10-08T13:36:07.431586+02:00 kiste 40grub2: debug: parsing: linux#011/vmlinuz-4.12.14-lp151.28.13-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 2019-10-08T13:36:07.437949+02:00 kiste 40grub2: debug: parsing: echo#011'Loading initial ramdisk ...' 2019-10-08T13:36:07.441135+02:00 kiste 40grub2: debug: parsing: initrd#011/initrd-4.12.14-lp151.28.13-default 2019-10-08T13:36:07.450581+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.453643+02:00 kiste 40grub2: result: /dev/sda5:/dev/sda2:openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.13-default (recovery mode):/boot/vmlinuz-4.12.14-lp151.28.13-default:/boot/initrd-4.12.14-lp151.28.13-default:root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 2019-10-08T13:36:07.456823+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.7-default' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.12.14-lp151.28.7-default-advanced-12c94c4b-cbe9-46f9-9bc4-4b984a202901' { 2019-10-08T13:36:07.474760+02:00 kiste 40grub2: debug: parsing: load_video 2019-10-08T13:36:07.477867+02:00 kiste 40grub2: debug: parsing: set gfxpayload=keep 2019-10-08T13:36:07.480876+02:00 kiste 40grub2: debug: parsing: insmod gzio 2019-10-08T13:36:07.483975+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.487066+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.490207+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.493712+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.497146+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.500765+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.503956+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.507038+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.510167+02:00 kiste 40grub2: debug: parsing: echo#011'Loading Linux 4.12.14-lp151.28.7-default ...' 2019-10-08T13:36:07.513401+02:00 kiste 40grub2: debug: parsing: linux#011/vmlinuz-4.12.14-lp151.28.7-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.519654+02:00 kiste 40grub2: debug: parsing: echo#011'Loading initial ramdisk ...' 2019-10-08T13:36:07.523226+02:00 kiste 40grub2: debug: parsing: initrd#011/initrd-4.12.14-lp151.28.7-default 2019-10-08T13:36:07.533687+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.537550+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.7-default (recovery mode)' --hotkey=1 --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.12.14-lp151.28.7-default-recovery-12c94c4b-cbe9-46f9-9bc4-4b984a202901' { 2019-10-08T13:36:07.556597+02:00 kiste 40grub2: debug: parsing: load_video 2019-10-08T13:36:07.559578+02:00 kiste 40grub2: debug: parsing: set gfxpayload=keep 2019-10-08T13:36:07.562723+02:00 kiste 40grub2: debug: parsing: insmod gzio 2019-10-08T13:36:07.565856+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.568950+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.572082+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.575186+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.578311+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.581452+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.584570+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.587633+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.591191+02:00 kiste 40grub2: debug: parsing: echo#011'Loading Linux 4.12.14-lp151.28.7-default ...' 2019-10-08T13:36:07.594554+02:00 kiste 40grub2: debug: parsing: linux#011/vmlinuz-4.12.14-lp151.28.7-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 2019-10-08T13:36:07.601278+02:00 kiste 40grub2: debug: parsing: echo#011'Loading initial ramdisk ...' 2019-10-08T13:36:07.604359+02:00 kiste 40grub2: debug: parsing: initrd#011/initrd-4.12.14-lp151.28.7-default 2019-10-08T13:36:07.613759+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.617011+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.620022+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:07.623175+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/10_linux ### 2019-10-08T13:36:07.626503+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:07.629621+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/20_linux_xen ### 2019-10-08T13:36:07.632763+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:07.636051+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/20_linux_xen ### 2019-10-08T13:36:07.638995+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:07.642760+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/20_memtest86+ ### 2019-10-08T13:36:07.645766+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/20_memtest86+ ### 2019-10-08T13:36:07.649097+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:07.652171+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/30_os-prober ### 2019-10-08T13:36:07.655192+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 (on /dev/sda5)' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-332d07b6-ba9f-4f2b-8c79-e112d194fd7e' { 2019-10-08T13:36:07.675504+02:00 kiste 40grub2: Skipping entry 'openSUSE Leap 15.1 (on /dev/sda5)': 2019-10-08T13:36:07.678682+02:00 kiste 40grub2: appears to be an automatic reference taken from another grub.cfg 2019-10-08T13:36:07.681913+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.685134+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.688442+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.691494+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.694817+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.698107+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.701379+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.704844+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.708143+02:00 kiste 40grub2: debug: parsing: linux /vmlinuz-4.12.14-lp151.28.16-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.714381+02:00 kiste 40grub2: debug: parsing: initrd /initrd-4.12.14-lp151.28.16-default 2019-10-08T13:36:07.724074+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.727471+02:00 kiste 40grub2: debug: parsing: submenu 'Advanced options for openSUSE Leap 15.1 (on /dev/sda5)' $menuentry_id_option 'osprober-gnulinux-advanced-332d07b6-ba9f-4f2b-8c79-e112d194fd7e' { 2019-10-08T13:36:07.730878+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.12.14-lp151.28.16-default--332d07b6-ba9f-4f2b-8c79-e112d194fd7e' { 2019-10-08T13:36:07.747231+02:00 kiste 40grub2: Skipping entry 'openSUSE Leap 15.1 (on /dev/sda5)': 2019-10-08T13:36:07.750274+02:00 kiste 40grub2: appears to be an automatic reference taken from another grub.cfg 2019-10-08T13:36:07.753400+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.756546+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.759653+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.762860+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.766083+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.769267+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.772420+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.775507+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.778639+02:00 kiste 40grub2: debug: parsing: linux /vmlinuz-4.12.14-lp151.28.16-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.785046+02:00 kiste 40grub2: debug: parsing: initrd /initrd-4.12.14-lp151.28.16-default 2019-10-08T13:36:07.794392+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.797649+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.16-default (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.12.14-lp151.28.16-default--332d07b6-ba9f-4f2b-8c79-e112d194fd7e' { 2019-10-08T13:36:07.815212+02:00 kiste 40grub2: Skipping entry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.16-default (on /dev/sda5)': 2019-10-08T13:36:07.818195+02:00 kiste 40grub2: appears to be an automatic reference taken from another grub.cfg 2019-10-08T13:36:07.821324+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.824588+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.827512+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.830579+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.833779+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.837042+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.840046+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.843126+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.846250+02:00 kiste 40grub2: debug: parsing: linux /vmlinuz-4.12.14-lp151.28.16-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.852654+02:00 kiste 40grub2: debug: parsing: initrd /initrd-4.12.14-lp151.28.16-default 2019-10-08T13:36:07.862009+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.865264+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.16-default (recovery mode) (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.12.14-lp151.28.16-default--332d07b6-ba9f-4f2b-8c79-e112d194fd7e' { 2019-10-08T13:36:07.881230+02:00 kiste 40grub2: Skipping entry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.16-default (recovery mode) (on /dev/sda5)': 2019-10-08T13:36:07.884363+02:00 kiste 40grub2: appears to be an automatic reference taken from another grub.cfg 2019-10-08T13:36:07.887455+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.890585+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.893743+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.896912+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.900109+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.903262+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.906418+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.909573+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.912763+02:00 kiste 40grub2: debug: parsing: linux /vmlinuz-4.12.14-lp151.28.16-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 2019-10-08T13:36:07.919046+02:00 kiste 40grub2: debug: parsing: initrd /initrd-4.12.14-lp151.28.16-default 2019-10-08T13:36:07.928554+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.931621+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.13-default (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.12.14-lp151.28.13-default--332d07b6-ba9f-4f2b-8c79-e112d194fd7e' { 2019-10-08T13:36:07.947877+02:00 kiste 40grub2: Skipping entry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.13-default (on /dev/sda5)': 2019-10-08T13:36:07.950812+02:00 kiste 40grub2: appears to be an automatic reference taken from another grub.cfg 2019-10-08T13:36:07.953852+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:07.957009+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:07.960231+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:07.963326+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:07.966456+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.969618+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:07.972758+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:07.975969+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:07.979193+02:00 kiste 40grub2: debug: parsing: linux /vmlinuz-4.12.14-lp151.28.13-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:07.985505+02:00 kiste 40grub2: debug: parsing: initrd /initrd-4.12.14-lp151.28.13-default 2019-10-08T13:36:07.994885+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:07.998127+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.13-default (recovery mode) (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.12.14-lp151.28.13-default--332d07b6-ba9f-4f2b-8c79-e112d194fd7e' { 2019-10-08T13:36:08.015747+02:00 kiste 40grub2: Skipping entry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.13-default (recovery mode) (on /dev/sda5)': 2019-10-08T13:36:08.018697+02:00 kiste 40grub2: appears to be an automatic reference taken from another grub.cfg 2019-10-08T13:36:08.021665+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:08.024731+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:08.027841+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:08.030929+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:08.034052+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:08.037249+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:08.040345+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:08.043420+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:08.046684+02:00 kiste 40grub2: debug: parsing: linux /vmlinuz-4.12.14-lp151.28.13-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 2019-10-08T13:36:08.052996+02:00 kiste 40grub2: debug: parsing: initrd /initrd-4.12.14-lp151.28.13-default 2019-10-08T13:36:08.062416+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:08.065704+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.7-default (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.12.14-lp151.28.7-default--332d07b6-ba9f-4f2b-8c79-e112d194fd7e' { 2019-10-08T13:36:08.083078+02:00 kiste 40grub2: Skipping entry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.7-default (on /dev/sda5)': 2019-10-08T13:36:08.086060+02:00 kiste 40grub2: appears to be an automatic reference taken from another grub.cfg 2019-10-08T13:36:08.089013+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:08.092327+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:08.095248+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:08.098423+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:08.101655+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:08.104814+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:08.107897+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:08.110997+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:08.114173+02:00 kiste 40grub2: debug: parsing: linux /vmlinuz-4.12.14-lp151.28.7-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 net.ifnames=0 2019-10-08T13:36:08.120716+02:00 kiste 40grub2: debug: parsing: initrd /initrd-4.12.14-lp151.28.7-default 2019-10-08T13:36:08.130065+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:08.133273+02:00 kiste 40grub2: debug: parsing: menuentry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.7-default (recovery mode) (on /dev/sda5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz-4.12.14-lp151.28.7-default--332d07b6-ba9f-4f2b-8c79-e112d194fd7e' { 2019-10-08T13:36:08.149515+02:00 kiste 40grub2: Skipping entry 'openSUSE Leap 15.1 , with Linux 4.12.14-lp151.28.7-default (recovery mode) (on /dev/sda5)': 2019-10-08T13:36:08.152599+02:00 kiste 40grub2: appears to be an automatic reference taken from another grub.cfg 2019-10-08T13:36:08.155758+02:00 kiste 40grub2: debug: parsing: insmod part_msdos 2019-10-08T13:36:08.158734+02:00 kiste 40grub2: debug: parsing: insmod ext2 2019-10-08T13:36:08.161792+02:00 kiste 40grub2: debug: parsing: set root='hd0,msdos2' 2019-10-08T13:36:08.164913+02:00 kiste 40grub2: debug: parsing: if [ x$feature_platform_search_hint = xy ]; then 2019-10-08T13:36:08.168104+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 --hint='hd0,msdos2' 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:08.171302+02:00 kiste 40grub2: debug: parsing: else 2019-10-08T13:36:08.174400+02:00 kiste 40grub2: debug: parsing: search --no-floppy --fs-uuid --set=root 2c080be0-510c-4ca8-a7b4-f7e249922090 2019-10-08T13:36:08.177535+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:08.180807+02:00 kiste 40grub2: debug: parsing: linux /vmlinuz-4.12.14-lp151.28.7-default root=UUID=12c94c4b-cbe9-46f9-9bc4-4b984a202901 2019-10-08T13:36:08.187139+02:00 kiste 40grub2: debug: parsing: initrd /initrd-4.12.14-lp151.28.7-default 2019-10-08T13:36:08.196631+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:08.199910+02:00 kiste 40grub2: debug: parsing: } 2019-10-08T13:36:08.202936+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:08.205948+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/30_os-prober ### 2019-10-08T13:36:08.209011+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:08.212172+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/40_custom ### 2019-10-08T13:36:08.215267+02:00 kiste 40grub2: debug: parsing: # This file provides an easy way to add custom menu entries. Simply type the 2019-10-08T13:36:08.218470+02:00 kiste 40grub2: debug: parsing: # menu entries you want to add after this comment. Be careful not to change 2019-10-08T13:36:08.221607+02:00 kiste 40grub2: debug: parsing: # the 'exec tail' line above. 2019-10-08T13:36:08.224720+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/40_custom ### 2019-10-08T13:36:08.227816+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:08.230915+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/41_custom ### 2019-10-08T13:36:08.234148+02:00 kiste 40grub2: debug: parsing: if [ -f ${config_directory}/custom.cfg ]; then 2019-10-08T13:36:08.237270+02:00 kiste 40grub2: debug: parsing: source ${config_directory}/custom.cfg 2019-10-08T13:36:08.240439+02:00 kiste 40grub2: debug: parsing: elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then 2019-10-08T13:36:08.243544+02:00 kiste 40grub2: debug: parsing: source $prefix/custom.cfg; 2019-10-08T13:36:08.246645+02:00 kiste 40grub2: debug: parsing: fi 2019-10-08T13:36:08.249781+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/41_custom ### 2019-10-08T13:36:08.252916+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:08.256146+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/80_suse_btrfs_snapshot ### 2019-10-08T13:36:08.259262+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/80_suse_btrfs_snapshot ### 2019-10-08T13:36:08.262403+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:08.265545+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/90_persistent ### 2019-10-08T13:36:08.268693+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/90_persistent ### 2019-10-08T13:36:08.271821+02:00 kiste 40grub2: debug: parsing: 2019-10-08T13:36:08.274912+02:00 kiste 40grub2: debug: parsing: ### BEGIN /etc/grub.d/95_textmode ### 2019-10-08T13:36:08.278167+02:00 kiste 40grub2: debug: parsing: ### END /etc/grub.d/95_textmode ### 2019-10-08T13:36:08.281857+02:00 kiste 50mounted-tests: debug: /usr/lib/linux-boot-probes/mounted/40grub2 succeeded 2019-10-08T13:36:08.301201+02:00 kiste linux-boot-prober: debug: linux detected by /usr/lib/linux-boot-probes/50mounted-tests 2019-10-08T13:36:13.449354+02:00 kiste [RPM][2122]: erase kernel-default-4.12.14-lp151.28.7.1.x86_64: success 2019-10-08T13:36:13.449771+02:00 kiste [RPM][2122]: Transaction ID 5d9c7489 finished: 0 2019-10-08T13:36:13.457380+02:00 kiste purge-kernels[1262]: Removed: 2019-10-08T13:36:13.457844+02:00 kiste purge-kernels[1262]: kernel-default-4.12.14-lp151.28.7.1.x86_64 2019-10-08T13:36:13.459016+02:00 kiste systemd[1]: Started Purge old kernels. 2019-10-08T13:36:13.460293+02:00 kiste systemd[1]: Reached target Multi-User System. 2019-10-08T13:36:13.460872+02:00 kiste systemd[1]: Reached target Graphical Interface. 2019-10-08T13:36:13.461157+02:00 kiste systemd[1]: Starting Update UTMP about System Runlevel Changes... 2019-10-08T13:36:13.471755+02:00 kiste systemd[1]: Started Update UTMP about System Runlevel Changes. 2019-10-08T13:36:13.472314+02:00 kiste systemd[1]: Startup finished in 2.122s (kernel) + 28.756s (initrd) + 2min 14.185s (userspace) = 2min 45.064s. 2019-10-08T13:36:24.785404+02:00 kiste nscd: 1164 Die beobachtete Datei »/etc/resolv.conf« wurde verändert (»mtime«) 2019-10-08T13:36:24.785890+02:00 kiste nscd: 1164 überwache Datei »/etc/resolv.conf« (7) 2019-10-08T13:36:24.786178+02:00 kiste nscd: 1164 überwache das Verzeichnis »/etc« (2) 2019-10-08T13:36:51.919908+02:00 kiste login: pam_unix(login:session): session closed for user root 2019-10-08T13:36:51.926799+02:00 kiste systemd[1]: getty(a)tty1.service: Service has no hold-off time (RestartSec=0), scheduling restart. 2019-10-08T13:36:51.927217+02:00 kiste systemd-logind[1269]: Session 2 logged out. Waiting for processes to exit. 2019-10-08T13:36:51.927676+02:00 kiste systemd[1]: Stopped Getty on tty1. 2019-10-08T13:36:51.928015+02:00 kiste systemd[1]: Started Getty on tty1. 2019-10-08T13:36:51.934646+02:00 kiste systemd-logind[1269]: Removed session 2. 2019-10-08T13:36:51.937258+02:00 kiste systemd[1]: Stopping User Manager for UID 0... 2019-10-08T13:36:52.013998+02:00 kiste systemd[3228]: Stopped target Default. 2019-10-08T13:36:52.014382+02:00 kiste systemd[3228]: Stopped target Basic System. 2019-10-08T13:36:52.014669+02:00 kiste systemd[3228]: Stopped target Sockets. 2019-10-08T13:36:52.014947+02:00 kiste systemd[3228]: Closed D-Bus User Message Bus Socket. 2019-10-08T13:36:52.015633+02:00 kiste systemd[3228]: Stopped target Timers. 2019-10-08T13:36:52.015979+02:00 kiste systemd[3228]: Stopped target Paths. 2019-10-08T13:36:52.016264+02:00 kiste systemd[3228]: Reached target Shutdown. 2019-10-08T13:36:52.016545+02:00 kiste systemd[3228]: Starting Exit the Session... 2019-10-08T13:36:52.036395+02:00 kiste systemd[3228]: Received SIGRTMIN+24 from PID 4327 (kill). 2019-10-08T13:36:52.056181+02:00 kiste systemd: pam_unix(systemd-user:session): session closed for user root 2019-10-08T13:36:52.058598+02:00 kiste systemd[1]: Stopped User Manager for UID 0. 2019-10-08T13:36:52.059877+02:00 kiste systemd[1]: Removed slice User Slice of root. 2019-10-08T13:37:03.718108+02:00 kiste sddm-greeter[1907]: Reading from "/usr/share/xsessions/plasma5.desktop" 2019-10-08T13:37:03.718562+02:00 kiste sddm[1632]: Message received from greeter: Login 2019-10-08T13:37:03.718900+02:00 kiste sddm[1632]: Reading from "/usr/share/xsessions/plasma5.desktop" 2019-10-08T13:37:03.721454+02:00 kiste sddm[1632]: Reading from "/usr/share/xsessions/plasma5.desktop" 2019-10-08T13:37:03.721869+02:00 kiste sddm[1632]: Session "/usr/share/xsessions/plasma5.desktop" selected, command: "/usr/bin/startkde" 2019-10-08T13:37:03.810159+02:00 kiste sddm-helper[4328]: [PAM] Starting... 2019-10-08T13:37:03.810683+02:00 kiste sddm-helper[4328]: [PAM] Authenticating... 2019-10-08T13:37:03.817501+02:00 kiste sddm-helper[4328]: [PAM] Preparing to converse... 2019-10-08T13:37:03.817913+02:00 kiste sddm-helper[4328]: [PAM] Conversation with 1 messages 2019-10-08T13:37:03.837957+02:00 kiste sddm-helper[4328]: [PAM] returning. 2019-10-08T13:37:03.839004+02:00 kiste sddm[1632]: Authenticated successfully 2019-10-08T13:37:03.839411+02:00 kiste sddm-greeter[1907]: Message received from daemon: LoginSucceeded (*) 2019-10-08T13:37:03.893232+02:00 kiste sddm-greeter[1907]: qrc:///QtQuick/VirtualKeyboard/content/components/SelectionControl.qml:80: TypeError: Cannot read property 'cursorRectIntersectsClipRect' of null (*) 2019-10-08T13:37:03.897454+02:00 kiste sddm-greeter[1907]: qrc:///QtQuick/VirtualKeyboard/content/components/SelectionControl.qml:48: TypeError: Cannot read property 'anchorRectIntersectsClipRect' of null 2019-10-08T13:37:03.905498+02:00 kiste systemd[1]: Created slice User Slice of jw. 2019-10-08T13:37:03.911740+02:00 kiste systemd[1]: Starting User Manager for UID 1000... 2019-10-08T13:37:03.925452+02:00 kiste systemd-logind[1269]: New session 3 of user jw. 2019-10-08T13:37:03.925821+02:00 kiste systemd: pam_unix(systemd-user:session): session opened for user jw by (uid=0) 2019-10-08T13:37:03.926200+02:00 kiste systemd[1]: Started Session 3 of user jw. 2019-10-08T13:37:04.084028+02:00 kiste systemd[4329]: Starting D-Bus User Message Bus Socket. 2019-10-08T13:37:04.084435+02:00 kiste systemd[4329]: Reached target Timers. 2019-10-08T13:37:04.084724+02:00 kiste systemd[4329]: Reached target Paths. 2019-10-08T13:37:04.097216+02:00 kiste systemd[4329]: Listening on D-Bus User Message Bus Socket. 2019-10-08T13:37:04.097580+02:00 kiste systemd[4329]: Reached target Sockets. 2019-10-08T13:37:04.097882+02:00 kiste systemd[4329]: Reached target Basic System. 2019-10-08T13:37:04.098152+02:00 kiste systemd[1]: Started User Manager for UID 1000. 2019-10-08T13:37:04.098432+02:00 kiste systemd[4329]: Reached target Default. 2019-10-08T13:37:04.098731+02:00 kiste systemd[4329]: Startup finished in 156ms. 2019-10-08T13:37:04.104399+02:00 kiste sddm-helper: pam_unix(sddm:session): session opened for user jw by (uid=0) 2019-10-08T13:37:04.104846+02:00 kiste sddm-helper[4328]: Starting: "/etc/X11/xdm/Xsession \"/usr/bin/startkde\"" 2019-10-08T13:37:04.128225+02:00 kiste sddm-helper[4338]: Adding cookie to "/home/jw/.Xauthority" 2019-10-08T13:37:04.152673+02:00 kiste sddm-helper[1893]: [PAM] Closing session 2019-10-08T13:37:04.154889+02:00 kiste sddm-helper: pam_unix(sddm-greeter:session): session closed for user sddm 2019-10-08T13:37:04.155579+02:00 kiste sddm-helper[1893]: [PAM] Ended. 2019-10-08T13:37:04.158717+02:00 kiste sddm[1632]: Auth: sddm-helper exited successfully 2019-10-08T13:37:04.159109+02:00 kiste sddm[1632]: Greeter stopped. 2019-10-08T13:37:04.160604+02:00 kiste systemd-logind[1269]: Session 1 logged out. Waiting for processes to exit. 2019-10-08T13:37:04.162505+02:00 kiste systemd-logind[1269]: Removed session 1. 2019-10-08T13:37:04.165246+02:00 kiste systemd[1]: Stopping User Manager for UID 466... 2019-10-08T13:37:04.166522+02:00 kiste systemd[1898]: Stopping D-Bus User Message Bus... 2019-10-08T13:37:04.166880+02:00 kiste systemd[1898]: Stopped target Default. 2019-10-08T13:37:04.172822+02:00 kiste systemd[1898]: Stopped D-Bus User Message Bus. 2019-10-08T13:37:04.173185+02:00 kiste systemd[1898]: Stopped target Basic System. 2019-10-08T13:37:04.173483+02:00 kiste systemd[1898]: Stopped target Sockets. 2019-10-08T13:37:04.173764+02:00 kiste systemd[1898]: Stopped target Paths. 2019-10-08T13:37:04.174451+02:00 kiste systemd[1898]: Stopped target Timers. 2019-10-08T13:37:04.174766+02:00 kiste systemd[1898]: Closed D-Bus User Message Bus Socket. 2019-10-08T13:37:04.175048+02:00 kiste systemd[1898]: Reached target Shutdown. 2019-10-08T13:37:04.175323+02:00 kiste systemd[1898]: Starting Exit the Session... 2019-10-08T13:37:04.178503+02:00 kiste systemd[1898]: Received SIGRTMIN+24 from PID 4340 (kill). 2019-10-08T13:37:04.183600+02:00 kiste sddm[1632]: Session started 2019-10-08T13:37:04.189959+02:00 kiste systemd[1]: Stopped User Manager for UID 466. 2019-10-08T13:37:04.190447+02:00 kiste systemd: pam_unix(systemd-user:session): session closed for user sddm 2019-10-08T13:37:04.191469+02:00 kiste systemd[1]: Removed slice User Slice of sddm. 2019-10-08T13:37:04.259126+02:00 kiste systemd[4329]: Started D-Bus User Message Bus. 2019-10-08T13:37:04.268671+02:00 kiste dbus-daemon[4348]: [session uid=1000 pid=4348] Successfully activated service 'org.freedesktop.systemd1' 2019-10-08T13:37:05.082697+02:00 kiste kapplymousetheme[4400]: kcm_input: Using X11 backend [ at this point the system hangs until I press the power button ] 2019-10-08T13:39:56.045936+02:00 kiste systemd-logind[1269]: Power key pressed. 2019-10-08T13:39:56.046381+02:00 kiste systemd-logind[1269]: Powering Off... 2019-10-08T13:39:56.046688+02:00 kiste systemd-logind[1269]: System is powering down. 2019-10-08T13:39:56.093007+02:00 kiste systemd[1]: Stopping Daemon for power management... 2019-10-08T13:39:56.093585+02:00 kiste avahi-daemon[1253]: Got SIGTERM, quitting. 2019-10-08T13:39:56.093888+02:00 kiste systemd[1]: Stopping Forward Password Requests to Plymouth... 2019-10-08T13:39:56.094143+02:00 kiste sshd[1493]: Received signal 15; terminating. 2019-10-08T13:39:56.094389+02:00 kiste systemd[1]: Stopped target Graphical Interface. 2019-10-08T13:39:56.094641+02:00 kiste avahi-daemon[1253]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::ca37:49b7:d23b:8919. 2019-10-08T13:39:56.095409+02:00 kiste systemd[1]: Stopping CUPS Scheduler... 2019-10-08T13:39:56.095672+02:00 kiste avahi-daemon[1253]: Leaving mDNS multicast group on interface eth0.IPv4 with address 10.116.41.67. 2019-10-08T13:39:56.095992+02:00 kiste systemd[1]: Stopped Detect if the system suffers from bsc#1089761. 2019-10-08T13:39:56.096245+02:00 kiste systemd[1]: Stopped Early Kernel Boot Messages. 2019-10-08T13:39:56.096501+02:00 kiste systemd[1]: Stopping X Display Manager... 2019-10-08T13:39:56.096748+02:00 kiste systemd[1]: Stopping Session 3 of user jw. 2019-10-08T13:39:56.096994+02:00 kiste systemd[1]: Stopped target Multi-User System. 2019-10-08T13:39:56.097245+02:00 kiste systemd[1]: Stopping Initializes zram swaping... 2019-10-08T13:39:56.097489+02:00 kiste systemd[1]: Stopping OpenSSH Daemon... (*) 2019-10-08T13:39:56.097749+02:00 kiste sddm[1632]: Authentication error: "Process crashed" (*) 2019-10-08T13:39:56.098069+02:00 kiste sddm[1632]: Auth: sddm-helper crashed (exit code 15) (*) 2019-10-08T13:39:56.098352+02:00 kiste sddm[1632]: Authentication error: "Process crashed" (*) 2019-10-08T13:39:56.098618+02:00 kiste sddm[1632]: Auth: sddm-helper exited with 15 2019-10-08T13:39:56.098895+02:00 kiste sddm[1632]: Socket server stopping... 2019-10-08T13:39:56.099151+02:00 kiste sddm[1632]: Socket server stopped. 2019-10-08T13:39:56.099408+02:00 kiste sddm[1632]: Display server stopping... 2019-10-08T13:39:56.099667+02:00 kiste systemd[1]: Stopping Avahi mDNS/DNS-SD Stack... 2019-10-08T13:39:56.103929+02:00 kiste systemd[1]: Stopping irqbalance daemon... 2019-10-08T13:39:56.104358+02:00 kiste systemd[1]: Stopped target Login Prompts. 2019-10-08T13:39:56.104700+02:00 kiste systemd[1]: Stopping Getty on tty1... 2019-10-08T13:39:56.105057+02:00 kiste systemd[1]: Stopping Machine Check Exception Logging Daemon... 2019-10-08T13:39:56.105556+02:00 kiste systemd[1]: Stopped Apply settings from /etc/sysconfig/keyboard. 2019-10-08T13:39:56.108897+02:00 kiste avahi-daemon[1253]: avahi-daemon 0.7 exiting. -- Josef Wolf jw(a)raven.inka.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 12

[opensuse] What on earth was this? I suddenly lost access to at least one hard disk.
by Carlos E. R. 13 Oct '19

13 Oct '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I was happily creating some directories and deleting others in mc, when suddenly the system wen bonkers. mc froze. I saw in the log that disk access was lost, so I halted, powered off and on, and booted. The first thing in the log is this: <10.6> 2019-10-11 20:40:01 Telcontar CRON 1584 - - pam_unix(crond:session): session closed for user cer <3.6> 2019-10-11 20:42:00 Telcontar dbus-daemon 4227 - - [session uid=1000 pid=4227] Activating service name='org.freedesktop.thumbnails.Cache1' requested by ':1.10' (uid=1000 pid=4307 comm="Thunar --sm-client-id 25b4ecb72-97b6-45d0-9e54-588") <1.6> 2019-10-11 20:42:00 Telcontar org.freedesktop.thumbnails.Cache1 4227 - - Registered thumbailer evince-thumbnailer -s %s %u %o <1.6> 2019-10-11 20:42:00 Telcontar org.freedesktop.thumbnails.Cache1 4227 - - Registered thumbailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o <1.6> 2019-10-11 20:42:00 Telcontar org.freedesktop.thumbnails.Cache1 4227 - - Registered thumbailer ffmpegthumbnailer -i %i -o %o -s %s -f <1.6> 2019-10-11 20:42:00 Telcontar org.freedesktop.thumbnails.Cache1 4227 - - Registered thumbailer gnome-thumbnail-font --size %s %u %o <1.6> 2019-10-11 20:42:00 Telcontar org.freedesktop.thumbnails.Cache1 4227 - - Registered thumbailer gsf-office-thumbnailer -i %i -o %o -s %s <1.6> 2019-10-11 20:42:00 Telcontar org.freedesktop.thumbnails.Cache1 4227 - - Registered thumbailer /usr/bin/totem-video-thumbnailer -s %s %u %o <1.6> 2019-10-11 20:42:00 Telcontar org.freedesktop.thumbnails.Cache1 4227 - - Registered thumbailer /usr/bin/gdk-pixbuf-thumbnailer -s %s %u %o <3.6> 2019-10-11 20:42:00 Telcontar dbus-daemon 4227 - - [session uid=1000 pid=4227] Successfully activated service 'org.freedesktop.thumbnails.Cache1' <0.3> 2019-10-11 20:45:36 Telcontar kernel - - - [260610.969175] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen <0.3> 2019-10-11 20:45:36 Telcontar kernel - - - [260610.969178] ata10.00: failed command: FLUSH CACHE EXT <0.3> 2019-10-11 20:45:36 Telcontar kernel - - - [260610.969183] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 <0.3> 2019-10-11 20:45:36 Telcontar kernel - - - [260610.969183] res 40/00:82:82:00:00/00:00:00:00:00/50 Emask 0x4 (timeout) <0.3> 2019-10-11 20:45:36 Telcontar kernel - - - [260610.969185] ata10.00: status: { DRDY } <0.6> 2019-10-11 20:45:36 Telcontar kernel - - - [260610.969190] ata10.00: hard resetting link <0.6> 2019-10-11 20:45:37 Telcontar kernel - - - [260611.283231] ata10.01: hard resetting link <0.4> 2019-10-11 20:45:42 Telcontar kernel - - - [260616.801391] ata10.00: link is slow to respond, please be patient (ready=0) <0.3> 2019-10-11 20:45:46 Telcontar kernel - - - [260621.005555] ata10.00: SRST failed (errno=-16) <0.6> 2019-10-11 20:45:46 Telcontar kernel - - - [260621.005560] ata10.00: hard resetting link <0.6> 2019-10-11 20:45:47 Telcontar kernel - - - [260621.319641] ata10.01: hard resetting link <0.4> 2019-10-11 20:45:52 Telcontar kernel - - - [260626.833785] ata10.00: link is slow to respond, please be patient (ready=0) <0.3> 2019-10-11 20:45:56 Telcontar kernel - - - [260631.033951] ata10.00: SRST failed (errno=-16) <0.6> 2019-10-11 20:45:56 Telcontar kernel - - - [260631.033957] ata10.00: hard resetting link <0.6> 2019-10-11 20:45:57 Telcontar kernel - - - [260631.348027] ata10.01: hard resetting link <0.4> 2019-10-11 20:46:02 Telcontar kernel - - - [260636.858178] ata10.00: link is slow to respond, please be patient (ready=0) <0.3> 2019-10-11 20:46:31 Telcontar kernel - - - [260666.091332] ata10.00: SRST failed (errno=-16) <0.4> 2019-10-11 20:46:31 Telcontar kernel - - - [260666.091337] ata10.00: limiting SATA link speed to 1.5 Gbps <0.4> 2019-10-11 20:46:31 Telcontar kernel - - - [260666.091339] ata10.01: limiting SATA link speed to 1.5 Gbps <0.6> 2019-10-11 20:46:31 Telcontar kernel - - - [260666.091343] ata10.00: hard resetting link <0.6> 2019-10-11 20:46:32 Telcontar kernel - - - [260666.405373] ata10.01: hard resetting link <0.3> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.139530] ata10.00: SRST failed (errno=-16) <0.3> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150081] ata10.00: reset failed, giving up <0.4> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150086] ata10.00: disabled <0.4> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150089] ata10.01: disabled <0.6> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150098] ata10: EH complete <0.6> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150117] sd 9:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK <0.6> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150121] sd 9:0:0:0: [sdc] tag#0 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 <0.3> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150130] print_req_error: I/O error, dev sdc, sector 2287414464 <0.6> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150140] sd 9:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK <0.6> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150143] sd 9:0:0:0: [sdc] tag#0 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 <0.3> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150144] print_req_error: I/O error, dev sdc, sector 7062330200 <0.3> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150148] print_req_error: I/O error, dev sdc, sector 7062330208 <0.1> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150169] XFS (sdc7): metadata I/O error: block 0x7a1e6cc0 ("xlog_iodone") error 5 numblks 64 <0.5> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150174] XFS (sdc7): xfs_do_force_shutdown(0x2) called from line 1263 of file ../fs/xfs/xfs_log.c. Return address = 0xffffffffa114de19 <0.6> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150176] sd 9:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK <0.6> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150180] sd 9:0:0:0: [sdc] tag#0 CDB: Write(16) 8a 00 00 00 00 00 06 8b 84 50 00 00 00 28 00 00 <0.3> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150183] print_req_error: I/O error, dev sdc, sector 109806672 <0.1> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150188] XFS (sdc7): Log I/O Error Detected. Shutting down filesystem <0.1> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150189] XFS (sdc7): Please umount the filesystem and rectify the problem(s) <0.1> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150192] XFS (sdc14): metadata I/O error: block 0x2cd1db58 ("xlog_iodone") error 5 numblks 64 <0.5> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150194] XFS (sdc14): xfs_do_force_shutdown(0x2) called from line 1263 of file ../fs/xfs/xfs_log.c. Return address = 0xffffffffa114de19 <0.1> 2019-10-11 20:46:37 Telcontar kernel - - - [260671.150216] XFS (sdc14): Log I/O Error Detected. Shutting down filesystem .... What was THAT? Telcontar:~ # smartctl --health /dev/sdc smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.14-lp151.28.16-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED Telcontar:~ # I just did a short test and it passed. Telcontar:~ # smartctl -x /dev/sdc smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.14-lp151.28.16-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 3.5 Device Model: ST4000DM004-2CV104 Serial Number: ZFN0DBVK LU WWN Device Id: 5 000c50 0a46c652b Firmware Version: 0001 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5425 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Oct 11 21:06:17 2019 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 486) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30a5) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 069 064 006 - 7467918 3 Spin_Up_Time PO---- 097 096 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 506 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 087 060 045 - 499325756 9 Power_On_Hours -O--CK 093 093 000 - 6672 (44 253 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 504 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 061 040 - 33 (Min/Max 32/33) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 167 193 Load_Cycle_Count -O--CK 100 100 000 - 691 194 Temperature_Celsius -O---K 033 040 000 - 33 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 069 064 000 - 7467918 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 6643h+31m+22.338s 241 Total_LBAs_Written ------ 100 253 000 - 12846250365 242 Total_LBAs_Read ------ 100 253 000 - 25403895357 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 9048 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xd1 GPL VS 264 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6672 - # 2 Short offline Completed without error 00% 6654 - # 3 Short offline Completed without error 00% 6638 - # 4 Short offline Completed without error 00% 6622 - # 5 Short offline Completed without error 00% 6614 - # 6 Short offline Completed without error 00% 6600 - # 7 Extended offline Completed without error 00% 6598 - # 8 Short offline Completed without error 00% 6581 - # 9 Short offline Completed without error 00% 6574 - #10 Short offline Completed without error 00% 6569 - #11 Short offline Completed without error 00% 6563 - #12 Short offline Completed without error 00% 6546 - #13 Short offline Completed without error 00% 6522 - #14 Short offline Completed without error 00% 6502 - #15 Short offline Completed without error 00% 6487 - #16 Short offline Completed without error 00% 6482 - #17 Short offline Completed without error 00% 6471 - #18 Short offline Completed without error 00% 6465 - #19 Short offline Completed without error 00% 6463 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 32/33 Celsius Lifetime Min/Max Temperature: 15/39 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (119) Index Estimated Time Temperature Celsius 120 2019-10-06 15:33 33 ************** 121 2019-10-06 16:32 ? - 122 2019-10-06 17:31 26 ******* 123 2019-10-06 18:30 32 ************* ... ..( 2 skipped). .. ************* 126 2019-10-06 21:27 32 ************* 127 2019-10-06 22:26 ? - 0 2019-10-06 23:25 27 ******** 1 2019-10-07 00:24 33 ************** 2 2019-10-07 01:23 ? - 3 2019-10-07 02:22 26 ******* 4 2019-10-07 03:21 32 ************* ... ..( 3 skipped). .. ************* 8 2019-10-07 07:17 32 ************* 9 2019-10-07 08:16 ? - 10 2019-10-07 09:15 26 ******* 11 2019-10-07 10:14 32 ************* 12 2019-10-07 11:13 33 ************** 13 2019-10-07 12:12 33 ************** 14 2019-10-07 13:11 32 ************* 15 2019-10-07 14:10 32 ************* 16 2019-10-07 15:09 34 *************** 17 2019-10-07 16:08 ? - 18 2019-10-07 17:07 25 ****** 19 2019-10-07 18:06 33 ************** 20 2019-10-07 19:05 34 *************** 21 2019-10-07 20:04 33 ************** 22 2019-10-07 21:03 33 ************** 23 2019-10-07 22:02 34 *************** 24 2019-10-07 23:01 ? - 25 2019-10-08 00:00 26 ******* 26 2019-10-08 00:59 34 *************** 27 2019-10-08 01:58 34 *************** 28 2019-10-08 02:57 34 *************** 29 2019-10-08 03:56 33 ************** 30 2019-10-08 04:55 34 *************** ... ..( 5 skipped). .. *************** 36 2019-10-08 10:49 34 *************** 37 2019-10-08 11:48 33 ************** 38 2019-10-08 12:47 34 *************** 39 2019-10-08 13:46 ? - 40 2019-10-08 14:45 26 ******* 41 2019-10-08 15:44 32 ************* ... ..( 2 skipped). .. ************* 44 2019-10-08 18:41 32 ************* 45 2019-10-08 19:40 33 ************** 46 2019-10-08 20:39 32 ************* 47 2019-10-08 21:38 33 ************** 48 2019-10-08 22:37 33 ************** 49 2019-10-08 23:36 32 ************* 50 2019-10-09 00:35 32 ************* 51 2019-10-09 01:34 32 ************* 52 2019-10-09 02:33 33 ************** 53 2019-10-09 03:32 32 ************* 54 2019-10-09 04:31 32 ************* 55 2019-10-09 05:30 32 ************* 56 2019-10-09 06:29 ? - 57 2019-10-09 07:28 26 ******* 58 2019-10-09 08:27 32 ************* 59 2019-10-09 09:26 32 ************* 60 2019-10-09 10:25 33 ************** 61 2019-10-09 11:24 33 ************** 62 2019-10-09 12:23 33 ************** 63 2019-10-09 13:22 32 ************* 64 2019-10-09 14:21 33 ************** 65 2019-10-09 15:20 ? - 66 2019-10-09 16:19 26 ******* 67 2019-10-09 17:18 32 ************* ... ..( 3 skipped). .. ************* 71 2019-10-09 21:14 32 ************* 72 2019-10-09 22:13 33 ************** 73 2019-10-09 23:12 32 ************* ... ..( 2 skipped). .. ************* 76 2019-10-10 02:09 32 ************* 77 2019-10-10 03:08 30 *********** 78 2019-10-10 04:07 32 ************* ... ..( 3 skipped). .. ************* 82 2019-10-10 08:03 32 ************* 83 2019-10-10 09:02 ? - 84 2019-10-10 10:01 26 ******* 85 2019-10-10 11:00 32 ************* ... ..( 2 skipped). .. ************* 88 2019-10-10 13:57 32 ************* 89 2019-10-10 14:56 33 ************** 90 2019-10-10 15:55 33 ************** 91 2019-10-10 16:54 32 ************* 92 2019-10-10 17:53 31 ************ 93 2019-10-10 18:52 33 ************** 94 2019-10-10 19:51 32 ************* ... ..( 9 skipped). .. ************* 104 2019-10-11 05:41 32 ************* 105 2019-10-11 06:40 31 ************ 106 2019-10-11 07:39 32 ************* ... ..( 10 skipped). .. ************* 117 2019-10-11 18:28 32 ************* 118 2019-10-11 19:27 ? - 119 2019-10-11 20:26 32 ************* SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 504 --- Lifetime Power-On Resets 0x01 0x010 4 6672 --- Power-on Hours 0x01 0x018 6 12845698977 --- Logical Sectors Written 0x01 0x020 6 112072766 --- Number of Write Commands 0x01 0x028 6 25400659571 --- Logical Sectors Read 0x01 0x030 6 244896730 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2337654761 N-- Spindle Motor Power-on Hours 0x03 0x010 4 2337652683 N-- Head Flying Hours 0x03 0x018 4 691 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 167 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 1 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 32 --- Average Short Term Temperature 0x05 0x018 1 31 --- Average Long Term Temperature 0x05 0x020 1 39 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 37 --- Highest Average Short Term Temperature 0x05 0x038 1 23 --- Lowest Average Short Term Temperature 0x05 0x040 1 34 --- Highest Average Long Term Temperature 0x05 0x048 1 24 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 190 --- Time in Under-Temperature 0x05 0x068 1 13 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1577 --- Number of Hardware Resets 0x06 0x010 4 61 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) supported [please try: '-l defects'] SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS Telcontar:~ # - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXaDTHRwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVp4kAnj2yjbEoIPTlxPjv37jV nj0NzBvNAJ4+LNeIiP2t2KoIYWXfgrIAcGWNww== =XHaa -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] google gmail changed IMAP to retain all of your email, regardless of IMAP settings.
by L A Walsh 13 Oct '19

13 Oct '19

I noticed some people having probs with gmail back in September, and I noticed a problem with gmail that I couldn't ignore and still haven't solved. Sometime last spring google changed their IMAPS service to no longer follow the IMAP specification. In IMAP, all email is normally routed to a fixed name 'Inbox' or 'INBOX'. They changed their IMAP service to put all email under a label called 'All Mail' that is not displayed, by default. IMAP users who previously turned off SPAM filtering had it turned back on with the IMAP 'INBOX' getting the remainder of the mail. When I checked my account, I found about 440 emails in the Junk/SPAM folder that were only emails from the past 30 days. Email in the Spam folder, is auto-deleted after 30 days. The above default to putting email in 'All Mail' happens even though the IMAP settings are set to have it deleted: ------This is from the control pannel for IMAP and POP access---- Status: IMAP is enabled x Enable IMAP Disable IMAP When I mark a message in IMAP as deleted: Auto-Expunge on - Immediately update the server. (default) x Auto-Expunge off - Wait for the client to update the server. When a message is marked as deleted and expunged from the last visible IMAP folder: Archive the message (default) Move the message to the Trash x Immediately delete the message forever -------------------------------------------------- Turns out I am now using about 1.8GB out of my allotment. I'm still engaging with their 3rd party support people -- google no longer handles customer support for gmail, but routes emails and calls to a 3rd party support organization that knows nothing about google's technical setup. Example of instructions for proceeding further in trying to escalate this: ======= Having addressed that we can now focus on the main issue "why IMAP settings are not being followed". To begin looking into this reported error I will need the following information. 1) Disconnect your account from IMAP and re-add. If the issue persist, please obtain the next pieces of information. 2) Screenshot of the IMAP settings claimed not working as intended 3) Screenshot of your IMAP configuration 4) Expected behavior 5) Actual behavior ======== Copying and pasting the settings wasn't something they could deal with. They responded: ============== Copying and pasting the setting configuration is not necessarily the same. I actually do not understand all of the text sent together as it appears everything is just joined together. Once again the following screenshot will allow us to determine why the messages are not being deleted from Google's side. 1) Log into Gmail.com 2) Go to Settings > Forwarding and POP/IMAP 3) Full Page Screenshot showing computer Time Stamp We will be awaiting your response with this so that we may continue to review your request. -------------- What computer time stamp? They don't have access to the gmail setup pages we are presented with. Anyway, if you thought you were not keeping your email on gmail -- you might want to check. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 10

[opensuse] Hundreds of coredumps related to tracker in oS 15.1
by Carlos E. R. 12 Oct '19

12 Oct '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I just upgraded to 15.1 (using zypper dup) As soon as I log in, I see in the log: <3.6> 2019-10-12 02:52:28 Telcontar dbus-daemon 5093 - - [session uid=1000 pid=5093] Activating via systemd: service name='org.gnome.zeitgeist.SimpleIndexer' unit='zeitgeist-fts.service' requested by ':1.155' (uid=1000 pid=19516 comm="/usr/bin/zeitgeist-daemon ") <3.6> 2019-10-12 02:52:28 Telcontar dbus-daemon 5093 - - [session uid=1000 pid=5093] Successfully activated service 'org.gnome.zeitgeist.Engine' <10.5> 2019-10-12 02:52:28 Telcontar polkitd 15858 - - Registered Authentication Agent for unix-session:40 (system bus name :1.44 [/usr/lib/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) <3.6> 2019-10-12 02:52:29 Telcontar dbus-daemon 5093 - - [session uid=1000 pid=5093] Successfully activated service 'org.gnome.zeitgeist.SimpleIndexer' <1.4> 2019-10-12 02:52:29 Telcontar zeitgeist-datah 19524 - - zeitgeist-datahub.vala:224: Unable to get name "org.gnome.zeitgeist.datahub" on the bus! <3.6> 2019-10-12 02:52:29 Telcontar dbus-daemon 5093 - - [session uid=1000 pid=5093] Successfully activated service 'org.freedesktop.thumbnails.Thumbnailer1' <1.4> 2019-10-12 02:52:31 Telcontar baloo_file 19612 - - Failed to register via dbus. Another instance is running <1.7> 2019-10-12 02:52:31 Telcontar drkonqi 19613 - - found lsb_release <1.7> 2019-10-12 02:52:31 Telcontar drkonqi 19613 - - Using /proc to determine executable path <1.7> 2019-10-12 02:52:31 Telcontar drkonqi 19613 - - Executable is: "/usr/bin/baloo_file" <1.7> 2019-10-12 02:52:31 Telcontar drkonqi 19613 - - Executable exists: true <1.7> 2019-10-12 02:52:31 Telcontar drkonqi 19613 - - Enabling drkonqi crash catching <1.4> 2019-10-12 02:52:31 Telcontar drkonqi 19613 - - QSystemTrayIcon::setVisible: No Icon set <3.6> 2019-10-12 02:52:32 Telcontar systemd 1 - - Started Process Core Dump (PID 19641/UID 0). <3.6> 2019-10-12 02:52:32 Telcontar systemd-coredump 19642 - - Removed old coredump core.single.1000.e88569c50cca448b961ddc5a0d233692.10798.1570835353000000.lz4. <3.6> 2019-10-12 02:52:32 Telcontar systemd 1 - - Started Process Core Dump (PID 19645/UID 0). <1.2> 2019-10-12 02:52:33 Telcontar systemd-coredump 19642 - - Process 19640 (single) of user 1000 dumped core. <1.7> 2019-10-12 02:52:33 Telcontar drkonqi 19613 - - Sending SIGSTOP to process <3.6> 2019-10-12 02:52:33 Telcontar systemd 1 - - Started Process Core Dump (PID 19652/UID 0). <1.2> 2019-10-12 02:52:34 Telcontar systemd-coredump 19646 - - Process 19644 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:34 Telcontar systemd 1 - - Started Process Core Dump (PID 19659/UID 0). <1.2> 2019-10-12 02:52:34 Telcontar systemd-coredump 19653 - - Process 19651 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:34 Telcontar systemd 1 - - Started Process Core Dump (PID 19666/UID 0). <3.6> 2019-10-12 02:52:34 Telcontar systemd-coredump 19667 - - Removed old coredump core.single.1000.e88569c50cca448b961ddc5a0d233692.10809.1570835354000000.lz4. <1.2> 2019-10-12 02:52:35 Telcontar systemd-coredump 19660 - - Process 19658 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:35 Telcontar systemd 1 - - Started Process Core Dump (PID 19676/UID 0). <1.2> 2019-10-12 02:52:35 Telcontar systemd-coredump 19667 - - Process 19665 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:35 Telcontar systemd 1 - - Started Process Core Dump (PID 19683/UID 0). <1.2> 2019-10-12 02:52:36 Telcontar systemd-coredump 19677 - - Process 19675 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:36 Telcontar systemd 1 - - Started Process Core Dump (PID 19690/UID 0). <1.2> 2019-10-12 02:52:36 Telcontar systemd-coredump 19684 - - Process 19682 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:36 Telcontar systemd 1 - - Started Process Core Dump (PID 19697/UID 0). <3.6> 2019-10-12 02:52:36 Telcontar systemd-coredump 19698 - - Removed old coredump core.single.1000.e88569c50cca448b961ddc5a0d233692.10818.1570835355000000.lz4. <1.2> 2019-10-12 02:52:36 Telcontar systemd-coredump 19691 - - Process 19689 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:37 Telcontar systemd 1 - - Started Process Core Dump (PID 19704/UID 0). <1.2> 2019-10-12 02:52:37 Telcontar systemd-coredump 19698 - - Process 19696 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:37 Telcontar systemd 1 - - Started Process Core Dump (PID 19711/UID 0). <1.2> 2019-10-12 02:52:38 Telcontar systemd-coredump 19705 - - Process 19703 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:38 Telcontar systemd 1 - - Started Process Core Dump (PID 19718/UID 0). <1.2> 2019-10-12 02:52:39 Telcontar systemd-coredump 19712 - - Process 19710 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:39 Telcontar systemd 1 - - Started Process Core Dump (PID 19725/UID 0). <1.2> 2019-10-12 02:52:39 Telcontar systemd-coredump 19719 - - Process 19717 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:40 Telcontar systemd 1 - - Started Process Core Dump (PID 19732/UID 0). <3.6> 2019-10-12 02:52:40 Telcontar systemd-coredump 19733 - - Removed old coredump core.single.1000.e88569c50cca448b961ddc5a0d233692.10825.1570835357000000.lz4. <1.2> 2019-10-12 02:52:40 Telcontar systemd-coredump 19726 - - Process 19724 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:40 Telcontar systemd 1 - - Started Process Core Dump (PID 19741/UID 0). <1.2> 2019-10-12 02:52:40 Telcontar systemd-coredump 19733 - - Process 19731 (single) of user 1000 dumped core. <3.6> 2019-10-12 02:52:41 Telcontar systemd 1 - - Started Process Core Dump (PID 19748/UID 0). Telcontar:~ # coredumpctl TIME PID UID GID SIG COREFILE EXE Sat 2019-10-12 00:58:44 CEST 6315 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:45 CEST 6319 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:45 CEST 6326 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:45 CEST 6335 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:46 CEST 6342 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:46 CEST 6349 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:47 CEST 6356 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:47 CEST 6363 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:48 CEST 6370 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:48 CEST 6377 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:48 CEST 6384 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:49 CEST 6392 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:49 CEST 6399 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:50 CEST 6406 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:50 CEST 6413 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:51 CEST 6422 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:51 CEST 6429 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:51 CEST 6436 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:52 CEST 6443 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:52 CEST 6452 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:53 CEST 6461 1000 100 31 missing /usr/lib/tracker-extract Sat 2019-10-12 00:58:53 CEST 6468 1000 100 31 missing /usr/lib/tracker-extract ...skipping... Sat 2019-10-12 02:52:57 CEST 20031 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:52:57 CEST 20038 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:52:58 CEST 20045 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:52:58 CEST 20052 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:52:59 CEST 20059 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:52:59 CEST 20066 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:00 CEST 20073 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:00 CEST 20080 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:01 CEST 20089 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:01 CEST 20096 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:02 CEST 20103 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:02 CEST 20110 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:03 CEST 20117 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:03 CEST 20124 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:04 CEST 20131 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:04 CEST 20138 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:05 CEST 20145 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:05 CEST 20152 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:06 CEST 20161 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:06 CEST 20168 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:07 CEST 20175 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:07 CEST 20182 1000 100 31 present /usr/lib/tracker-extract Sat 2019-10-12 02:53:32 CEST 19481 1000 100 11 present /usr/bin/baloo_file Telcontar:~ # To stop it, I have to: killall tracker-store tracker-extract tracker-miner-apps tracker-miner-fs which works till next login. Telcontar:~ # coredumpctl info 20182 19481 PID: 20182 (single) UID: 1000 (cer) GID: 100 (users) Signal: 31 (SYS) Timestamp: Sat 2019-10-12 02:53:07 CEST (9min ago) Command Line: /usr/lib/tracker-extract Executable: /usr/lib/tracker-extract Control Group: /user.slice/user-1000.slice/session-40.scope Unit: session-40.scope Slice: user-1000.slice Session: 40 Owner UID: 1000 (cer) Boot ID: e88569c50cca448b961ddc5a0d233692 Machine ID: 2ce1d54548517a7307c1c2bc38206d00 Hostname: Telcontar Storage: /var/lib/systemd/coredump/core.single.1000.e88569c50cca448b961ddc5a0d233692.20182.1570841587000000.lz4 Message: Process 20182 (single) of user 1000 dumped core. PID: 19481 (baloo_file) UID: 1000 (cer) GID: 100 (users) Signal: 11 (SEGV) Timestamp: Sat 2019-10-12 02:53:32 CEST (9min ago) Command Line: baloo_file Executable: /usr/bin/baloo_file Control Group: /user.slice/user-1000.slice/session-40.scope Unit: session-40.scope Slice: user-1000.slice Session: 40 Owner UID: 1000 (cer) Boot ID: e88569c50cca448b961ddc5a0d233692 Machine ID: 2ce1d54548517a7307c1c2bc38206d00 Hostname: Telcontar Storage: /var/lib/systemd/coredump/core.baloo_file.1000.e88569c50cca448b961ddc5a0d233692.19481.1570841612000000.lz4 Message: Process 19481 (baloo_file) of user 1000 dumped core. Telcontar:~ # Ideas to stop this and get tracker to work properly without this madness? Bugzilla? - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXaEm/Rwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVZy0An06LbygIT0rTVB6iS+Ts bvLC5bT2AJ4kKZDL4tOAqUDUshaTJank80gItw== =za/8 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] distribution upgrade sed problem
by Carlos E. R. 11 Oct '19

11 Oct '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, on <https://en.opensuse.org/SDB:System_upgrade> it says: The following command modifies all repos from the old to the new. Modify "15.0" if your current system is not 15.0: # sed -i 's/15.0/15.1/g' /etc/zypp/repos.d/* Well, it does not work for me: Telcontar:/etc/zypp/repos.d # sed -i 's/15.0/15.1/g' /etc/zypp/repos.d/* sed: couldn't edit /etc/zypp/repos.d/ANTIGUOS_REPOS: not a regular file Telcontar:/etc/zypp/repos.d # Yes, certainly I do have directories in that path. How do I change that sed command to work ignoring directories in there? I confess that sed syntax overloads my mind, so I need help. Meanwhile, I'm editing all those files by hand, one by one. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXaDKlhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVO44An0n+FJZ11J3IzjcHzcJM XmVzTIUqAJ9+zSC20b0pBTtEP0EFUTI2Ja91Kw== =jnIq -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Leap 15.0 - touchpad on Thinkpad P50 not working since Kernel 4.12.14-lp150.12.73
by Boris Gaensicke 11 Oct '19

11 Oct '19

Hi, I am running Opensuse Leap 15.0 on a Lenovo Thinkpad P50 with XFCE 4 as window manager. After the last two kernel updates (4.12.14-lp150.12.73 / 76) the touchpad is not working any longer. The touchpad is still recognised (Synaptics TM3149-002), and actived in the XFCE settings, but simply does not work. A mouse plugged into the USB port or docking station works fine. Booting back into 4.12.14-lp150.12.70 the touchpad still works fine. Boris -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Kudos to opensuse for designing a ballot that uses no js except from opensuse.org
by David C. Rankin 10 Oct '19

10 Oct '19

opensuse webmins, Very good job on the name-change ballot. For the very first time in one of these web based schemes, I didn't have to fight with NoScript to let a lot of nasty sites run javascript on my box just to click a few buttons. Kudos to you! -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Spell check not working right in 15.0 Thunderbird
by Carlos E. R. 08 Oct '19

08 Oct '19

I have an email with quoted material, with all the quoted text underlined in red, while the normal text works. I change the language from English to Spanish and reverse, no change. > I have an email with quoted material, with all the quoted text underlined in red. After I start this post, Thunderbird behaves correctly on the old and new mail. I applied an update today. 68.1.1 (64-bit) -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

3 3

[opensuse] leap 15.1 nfs server
by Mark Hounschell 08 Oct '19

08 Oct '19

Just upgraded a box from 15.0 to 15.1 and all seems to work except the nfs server. Checked the config via yast and all looks normal. The nfsserver.service starts. # systemctl status nfs-server ● nfs-server.service - NFS server and services Loaded: loaded (/usr/lib/systemd/system/nfs-server.service; enabled; vendor preset: disabled) Drop-In: /usr/lib/systemd/system/nfs-server.service.d └─nfsserver.conf, options.conf /run/systemd/generator/nfs-server.service.d └─order-with-mounts.conf Active: active (exited) since Sat 2019-10-05 09:59:13 EDT; 39s ago Process: 2837 ExecStart=/usr/sbin/rpc.nfsd $NFSD_OPTIONS (code=exited, status=0/SUCCESS) Main PID: 2837 (code=exited, status=0/SUCCESS) Tasks: 0 (limit: 4915) CGroup: /system.slice/nfs-server.service Oct 05 09:59:12 harley systemd[1]: Starting NFS server and services... Oct 05 09:59:13 harley systemd[1]: Started NFS server and services. I made no configuration changes. Neither of the leap-15.0 boxes are now able to mount the exports of the leap-15.1 system. Are there any known issues? Regards Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 7

[opensuse] Firefox ESR
by Frans de Boer 08 Oct '19

08 Oct '19

LS, I was unpleasantly surprised today after applying the latest updates to 15.1. I normally share the .mozilla directory between TW and 15.1. Now Firefox under 15.1 start wining and does not let me use the data, add-ons etc in my common .mozilla directory. No, I have to make a whole new profile, which I need to maintain also. Double the effort for the same functionality. Many packages on 15.1 are already (very) old, but at least it is slightly more stable then TW. So that's my production environment. TW is used for other purposes. But now it takes extra the effort for syncing both .mozilla directories. What's next, same with Thunderbird? --- Frans. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 13

[opensuse] tumbleweed update - firewalld blocking qemu-guests
by Simon Becherer 08 Oct '19

08 Oct '19

Hi, updated tumbleweed from: 20190607 -> 20191002 i have a bridge network for qemu. using virt-manager for virtualization. before update my guests where inside my home-network accessible with ssh from all computers. after the update only the host computer could ssh to the guests. no other computer from network will work: ssh: connect to host visume port 22: No route to host ping is working. when i stop firewalld at the host, all computers from network are able to connect to the virtual computers. the bridge has open ssh ports what has changed? i do not see anithing. (i am not expert with firewalld, i use yast firewall) is there somewhere a config file where some standarts have changed? simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] gnome scrollbars
by Dave Howorth 08 Oct '19

08 Oct '19

I've finally become annoyed enough with the gnome scrollbars to want to fix them. (the ones that are almost invisible and only become visible when you mouse over them). I've found https://www.linuxuprising.com/2019/09/how-to-disable-gnomes-overlay.html and determined that I don't have the 'overlay-scrolling' setting in dconf-editor, so presumably have an older version of gnome. I don't know how to find out what version of gnome I'm running, or even whether the question makes sense. There are various how-tos online that don't work on my system. I use an LXDE desktop and various programs of all ilks as my mood takes me. YaST shows me various different version numbers for various gnome-* packages, but the latest seems to be 3.26. Is there a concept of a single gnome version and how can I find it? Anyway I tried GTK_OVERLAY_SCROLLING=0 gedit and that worked so I've added export GTK_OVERLAY_SCROLLING=0 gdbus call --session --dest org.freedesktop.DBus --object-path /org/freedesktop/DBus --method org.freedesktop.DBus.UpdateActivationEnvironment '{"GTK_OVERLAY_SCROLLING": "0"}' to ~/.profile and that works. The I decided to make it the default for the whole system so I went to add it to /etc/environment. But that file just contains: # # This file is parsed by pam_env module # # Syntax: simple "KEY=VAL" pairs on seperate lines # which apart from the spelling error, just seems to indicate that it's not a good place to put a shell script fragment. So is the comment correct, or is the file actually interpreted by a shell at some point? And if the comment is correct, what's the correct place to put the gnome setting for its scrollbars to make it global? Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] Backup Failed
by Carlos E.R. 07 Oct '19

07 Oct '19

Please remember to post to the mail list, not in private. If I don't see the post or don't know the answer, you are stuck, while other listers may know the answer. > On 05/10/2019 21:10, Carlos E. R. wrote: >> On 05/10/2019 22.05, Paul Groves wrote: >>> My backup failed last night. I have three files which failed with >>> tar error Cannot stat: Bad message >>> >>> I tried opening the files and the cannot open with bad message error >>> I also checked the permissions which shows a load of question marks >>> instead of the rwx flags >>> >>> What does this error mean and how can I fix it? >> >> umount and fsck the partition On 07/10/2019 17.32, Paul Groves wrote: > It is the root partition of a live server. Is there a way I can do this > on this system while it is up? Quick answer is "no". But sometimes you might. If it is the /home partition or other data partition, you could umount it while live. If it is the "/" or root partition, then no; you must reboot, and my preference is to reboot to another partition or to a live system on USB. Note: if the root filesystem is btrfs I can hardly help with a detailed recovery procedure; I mean, if you hit further problems with the fsck itself. I confess my ignorance on btrfs. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

1 0

[opensuse] I lost several addons with the last Thunderbird update on 15.0
by Carlos E. R. 07 Oct '19

07 Oct '19

I did not see a warning of this. I lost "Check and Send", "Remove duplicate Messages (Alternate)" and "Toggle Word Wrap" The last one I used daily. :-( -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

4 9

[opensuse] tumbleweed - update wifi will not start
by Simon Becherer 07 Oct '19

07 Oct '19

Hi, updated tumbleweed from: 20190607 -> 20191002 the wireless network adapter "wlp2s0" did not start automatically as before. starting by hand will work. how to find the problem??? situation: managed by wicked, over a bonding device. so if unplug from cable the wireless will jump in. was working before. after update i got: wicked ifstatus all lo up link: #1, state up type: loopback config: compat:suse:/etc/sysconfig/network/ifcfg-lo leases: ipv4 static granted addr: ipv4 127.0.0.1/8 [static] enp3s0 enslaved link: #2, state device-up, mtu 1500, master bond0 type: ethernet, hwaddr xx:xx:xx:xx:xx:xx config: compat:suse:/etc/sysconfig/network/ifcfg-enp3s0 wlp2s0 device-not-running link: #3, state down, mtu 1500 type: wireless config: compat:suse:/etc/sysconfig/network/ifcfg-wlp2s0 bond0 setup-in-progress link: #4, state device-up, mtu 1500 type: bond, mode active-backup, hwaddr xx:xx:xx:xx:xx:xx config: compat:suse:/etc/sysconfig/network/ifcfg-bond0 then start by hand: wicked ifup wlp2s0 wlp2s0 enslaved wicked ifstatus all lo up link: #1, state up type: loopback config: compat:suse:/etc/sysconfig/network/ifcfg-lo leases: ipv4 static granted addr: ipv4 127.0.0.1/8 [static] enp3s0 enslaved link: #2, state device-up, mtu 1500, master bond0 type: ethernet, hwaddr xx:xx:xx:xx:xx:xx config: compat:suse:/etc/sysconfig/network/ifcfg-enp3s0 wlp2s0 enslaved link: #3, state up, mtu 1500, master bond0 type: wireless config: compat:suse:/etc/sysconfig/network/ifcfg-wlp2s0 bond0 up link: #4, state up, mtu 1500 type: bond, mode active-backup, hwaddr xx:xx:xx:xx:xx:xx config: compat:suse:/etc/sysconfig/network/ifcfg-bond0 leases: ipv4 static granted addr: ipv4 192.168.0.23/24 [static] route: ipv4 default via 192.168.0.99 proto boot ============================== some logs with the error: Okt 06 20:51:43 becherer7 systemd[1]: Starting wicked AutoIPv4 supplicant service... Okt 06 20:51:43 becherer7 systemd[1]: Starting wicked DHCPv6 supplicant service... Okt 06 20:51:43 becherer7 systemd[1]: Starting wicked DHCPv4 supplicant service... Okt 06 20:51:43 becherer7 systemd[1]: Started wicked AutoIPv4 supplicant service. Okt 06 20:51:43 becherer7 systemd[1]: Started wicked DHCPv6 supplicant service. Okt 06 20:51:43 becherer7 systemd[1]: Started wicked DHCPv4 supplicant service. Okt 06 20:51:44 becherer7 systemd[1]: Starting wicked network management service daemon... Okt 06 20:51:44 becherer7 systemd[1]: Started wicked network management service daemon. Okt 06 20:51:44 becherer7 systemd[1]: Starting wicked network nanny service... Okt 06 20:51:44 becherer7 systemd[1]: Started wicked network nanny service. Okt 06 20:51:44 becherer7 systemd[1]: Starting wicked managed network interfaces... Okt 06 20:51:44 becherer7 dbus-daemon[1237]: [system] Activating via systemd: service name='fi.epitest.hostap.WPASupplicant' unit='wpa_supplicant.service' requested by ':1.14' (uid=0 pid=1388 comm="/usr/sbin/wickedd --systemd --foreground ") Okt 06 20:52:09 becherer7 wickedd[1388]: ni_wpa_interface_bind(wlp2s0): Operation not permitted Okt 06 20:52:09 becherer7 wickedd[1388]: wpa_supplicant doesn't know interface wlp2s0 Okt 06 20:52:09 becherer7 wickedd-nanny[1392]: device wlp2s0: call to org.opensuse.Network.Wireless.changeDevice() failed: General failure Okt 06 20:52:09 becherer7 wickedd-nanny[1392]: wlp2s0: failed to bring up device, still continuing Okt 06 20:52:14 becherer7 wicked[1394]: lo up Okt 06 20:52:14 becherer7 wicked[1394]: enp3s0 enslaved Okt 06 20:52:14 becherer7 wicked[1394]: wlp2s0 device-not-running Okt 06 20:52:14 becherer7 wicked[1394]: bond0 setup-in-progress Okt 06 20:52:14 becherer7 systemd[1]: Started wicked managed network interfaces. Okt 06 20:53:16 becherer7 wickedd[1388]: unable to translate eap protocol PWD ======================================= and here is my /etc/sysconfig/network/ifcfg-wlp2s0 BOOTPROTO='none' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='' MTU='' NAME='Wireless 7260' NETWORK='' REMOTE_IPADDR='' STARTMODE='hotplug' WIRELESS_AP='' WIRELESS_AP_SCANMODE='1' WIRELESS_AUTH_MODE='psk' WIRELESS_BITRATE='auto' WIRELESS_CA_CERT='' WIRELESS_CHANNEL='' WIRELESS_CLIENT_CERT='' WIRELESS_CLIENT_KEY='' WIRELESS_CLIENT_KEY_PASSWORD='' WIRELESS_DEFAULT_KEY='0' WIRELESS_EAP_AUTH='' WIRELESS_EAP_MODE='' WIRELESS_ESSID='my-wifiname' WIRELESS_FREQUENCY='' WIRELESS_KEY='' WIRELESS_KEY_0='' WIRELESS_KEY_1='' WIRELESS_KEY_2='' WIRELESS_KEY_3='' WIRELESS_KEY_LENGTH='128' WIRELESS_MODE='Managed' WIRELESS_NICK='' WIRELESS_NWID='' WIRELESS_PEAP_VERSION='' WIRELESS_POWER='no' WIRELESS_WPA_ANONID='' WIRELESS_WPA_IDENTITY='' WIRELESS_WPA_PASSWORD='' WIRELESS_WPA_PSK='my-password' ZONE=home PREFIXLEN='24' IFPLUGD_PRIORITY='1' this file has not changed since the update. whats going on here?? simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Google search security question
by Carlos E. R. 06 Oct '19

06 Oct '19

Hi, This has happened to me more than once, but this time I investigated. I was googling for "home made vaccum pump for grains" (something on a thread on the offtopic mail list). One of the answers was: +++............ Homemade Grain Vac - Inomera inomera.com › svp=homemade-grain-vac Traducir esta página This pump can draw a vacuum like the first, but it can also inflate beach toys and air mattresses, or pump water. The actual shelf life of oatmeal varies with the ... ............++- Points to <https://www.goo[---]gle.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=23&cad=r…> (side note: I'm disabling most urls in this post by inserting But clicking on the *google* search I got redirected to a BAD site that fakes to be google but it is not, says that I have been selected for a price. Impossible to go back, the site manipulates the FF history (so, if you try it, use "open on a new tab"). Attempting again, I get to porno site! It is not the first time this happens to me. :-( It seems the first redirection is <https://lads[---]blue.com/rubpf4qr?key=356544da9066c05a7f4a580d11b93717> It also hits: <https://best[---]dateshere-for23.com/?u=7pfk605&o=e9ym176&t=14961610adster&…> <http://competi[---]tion8673.fastfree[---]redics105.live/4513258688/?u=zqq8h…> <https://best.alie[---]xpress.com/es.htm?af=14952720&dp=aemkt8ltfstr&cn=%257…> <https://commer[---]cego.site/tracking/redirct.php?t=http://s.click.aliexpre…> <http://gamet[---]racker.club/redirct.php?t=http://s.click.aliexpress.com/e/…> I will have to block all those sites. ¿Ideas? This machine is on "named". Can "ublock" block entire sites? [...] Yes, but I don't know where to write them. <https://github.com/gorhill/uBlock/wiki/Dynamic-filtering:-rule-syntax> «For example, * disqus.com * block means "globally block all net requests to disqus.com".» I have to do that, but I don't see how. The addon does not allow me to write anything! The box to write is a search box. Apparently: 127.0.0.1 lads[---]blue.com in /etc/hosts does the trick So that's what I'm doing now. Is that the best method, or can I convince ublock to block entire sites? Second question: Can one report to google that it is giving as replies *bad* sites? -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

5 8

[opensuse] supertuxcart
by Simon Becherer 06 Oct '19

06 Oct '19

Hi, is someone running supertuxcart on a LOCAL network with firewalls enabled? i opened the 3 ports (server and client): 2759 udp 2758 udp 2757 udp i could play when i type in the server ip-address. but the search for servers will not show the server. only if i disable the firewall AT CLIENT then it will show the server with the search function. i tried also to change the config of supertuxcart to use static client port. but what i have seen with wireshark (without really knowing what i see) there is no 2758 shown, so i guess this setting did not work at the moment) any ideas ? simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Backup Failed
by Paul Groves 05 Oct '19

05 Oct '19

My backup failed last night. I have three files which failed with tar error Cannot stat: Bad message I tried opening the files and the cannot open with bad message error I also checked the permissions which shows a load of question marks instead of the rwx flags What does this error mean and how can I fix it? Paul -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] OT-ish : dir content globbing question
by David T-G 05 Oct '19

05 Oct '19

Hi, all -- I know that this isn't SuSE-specific, but everyone here loves a puzzle :-) I have a collection of directories with varying contents; most but not all have files in them, and many of interest have subdirs in them. Here's a sample set: davidtg@u17383850:/tmp/TEST> du -ka * 16404 2019-0203/file 32804 2019-0203/DIR-100/content 32808 2019-0203/DIR-100 32804 2019-0203/DIR-23W/content 32808 2019-0203/DIR-23W 32804 2019-0203/DIR-A05/content 32808 2019-0203/DIR-A05 114832 2019-0203 16404 2019-0312/file 16408 2019-0312 32804 2019-0416/DIR-209/content 32808 2019-0416/DIR-209 16404 2019-0416/file 16404 2019-0416/other 65620 2019-0416 4 2019-0611 32804 2019-0817/DIR-209/content 32808 2019-0817/DIR-209 16404 2019-0817/file 32804 2019-0817/DIR-941/content 32808 2019-0817/DIR-941 32804 2019-0817/DIR-PXD/content 32808 2019-0817/DIR-PXD 114832 2019-0817 16404 2019-0924/file 16404 2019-0924/other 32812 2019-0924 I want to get a du total for all of the DIR-* subdirs, grouped by parent, without throwing any errors. The simple version obviously doesn't work: davidtg@u17383850:/tmp/TEST> for D in 2* ; do du -skhc $D/DIR-* ; done 33M 2019-0203/DIR-100 33M 2019-0203/DIR-23W 33M 2019-0203/DIR-A05 97M total du: cannot access `2019-0312/DIR-*': No such file or directory 0 total 33M 2019-0416/DIR-209 33M total du: cannot access `2019-0611/DIR-*': No such file or directory 0 total 33M 2019-0817/DIR-209 33M 2019-0817/DIR-941 33M 2019-0817/DIR-PXD 97M total du: cannot access `2019-0924/DIR-*': No such file or directory 0 total The best I've found in ten minutes of thinking is to use case to test a globbing of the list to see if it's still the input, but that seems ... ugly :-) davidtg@u17383850:/tmp/TEST> for D in 2* ; do DIRS=`echo $D/DIR-*` ; case "$DIRS" in *\* ) continue ;; esac ; du -skhc $D/DIR* ; done 33M 2019-0203/DIR-100 33M 2019-0203/DIR-23W 33M 2019-0203/DIR-A05 97M total 33M 2019-0416/DIR-209 33M total 33M 2019-0817/DIR-209 33M 2019-0817/DIR-941 33M 2019-0817/DIR-PXD 97M total What I'd really like is to be able to [ -d $D/DIR-* ] but of course that doesn't work because there can be multiple matches. Got any better ideas? HANN :-D -- David T-G See http://justpickone.org/davidtg/email/ See http://justpickone.org/davidtg/tofu.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 9

[opensuse] video question
by Doug McGarrett 05 Oct '19

05 Oct '19

OpenSUSE Tumbleweed up to date as per a day or two ago. I receive every so often, a video packed in a file from some organization--perhaps Popular Mechanics--which reads "No compatible source was found for this media. Refresh the page to resume playback." It is not possible to play the video. It is not possible to "refresh the page"--I wouldn't even know how, if it were, but no action can be taken in regard to this. The specific file from PopMech is called WATCH NEXT "This Glider Uses Water-Reactive Fuel to Launch" It is a subsidiary of this URL: https://www.popularmechanics.com/science/animals/g29331225/fat-bears-machin… I probably need some kind of driver that I don't have. Can someone tell me what I need to run this video? Thanx! --doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 22

[opensuse] tumbleweed update libvirtd did not start any more.
by Simon Becherer 05 Oct '19

05 Oct '19

Hi, updated tumbleweed from: 20190607 -> 20191002 libvirt will not start any more. (before was running) ● libvirtd.service - Virtualization daemon Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Sat 2019-10-05 16:46:22 CEST; 3min 20s ago Docs: man:libvirtd(8) https://libvirt.org Process: 9810 ExecStart=/usr/sbin/libvirtd $LIBVIRTD_ARGS (code=exited, status=6) Main PID: 9810 (code=exited, status=6) Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.service: Service RestartSec=100ms expired, scheduling restart. Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.service: Scheduled restart job, restart counter is at 5. Oct 05 16:46:22 becherer2 systemd[1]: Stopped Virtualization daemon. Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.service: Start request repeated too quickly. Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.service: Failed with result 'exit-code'. Oct 05 16:46:22 becherer2 systemd[1]: Failed to start Virtualization daemon. ● libvirtd.socket - Libvirt local socket Loaded: loaded (/usr/lib/systemd/system/libvirtd.socket; disabled; vendor preset: disabled) Active: failed (Result: service-start-limit-hit) since Sat 2019-10-05 16:46:22 CEST; 3min 20s ago Listen: /run/libvirt/libvirt-sock (Stream) Oct 05 16:46:21 becherer2 systemd[1]: Listening on Libvirt local socket. Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.socket: Failed with result 'service-start-limit-hit'. what should this tell me???? simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

Re: [opensuse] video question
by Carlos E.R. 05 Oct '19

05 Oct '19

You forgot to post to the list, so others could not comment. On 04/10/2019 20.23, Doug McGarrett wrote: > On 10/04/2019 01:04 PM, Carlos E.R. wrote: >> On 04/10/2019 16.31, Peter McD wrote: >>> Am 04.10.19 um 14:10 schrieb Carlos E. R.: >>>> On 04/10/2019 13.45, Peter McD wrote: >>>>> Am 04.10.19 um 02:52 schrieb Doug McGarrett: >>>>> >>>>>> Thank you, Carlos! I believe that this worked. Your very detailed >>>>>> instructions are just what I needed to add the Packman stuff. > > It looks lke it only partly worked. I can now see a picture when I try > and open "This Glider Uses Water-Reactive Fuel to Launch" from the Pop > Mech site, but I just get a little circle going around and around in the > middle of the picture. Maybe the picture is defective, but I > suspect there's still something missing. The other test video that > someone suggested in this thread is viewable. Well, maybe you need to restart the session or maybe reboot. Try "zypper ps" to see what is pending (as root or sudo). It is also possible that you need something else. Enter yast software manager again, search (in the search box) for "GStreamer" (name only). There should be a lot of them. Well, now, one by one you check that they come from packman (there is a version tab on the right hand panel). Some do not have a version on packman, so don't change them. You'll see a list of package versions and from where; the top line says what's the installed version. If it is not packman and there is one from packman, just tick on the one that says "packman". There should be none to change, as you did the switch yesterday. Maybe there is some not installed package, though; if that's the case, use your judgment to install them. Those will not have a tick on the left (right hand panel, top half). Ignore the -debuginfo or -devel or -doc packages. Possibly ignore the -32bit too. Me, I just did that and found some new ones. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

1 0

[opensuse] leap 15.0 zypper up - Segmentation Fault??
by David C. Rankin 04 Oct '19

04 Oct '19

All, This is the first time I've seen this: # zypper up Retrieving repository 'cinelerra' metadata ........................................................[done] Building repository 'cinelerra' cache .............................................................[done] Retrieving repository 'mozilla' metadata ..........................................................[done] Building repository 'mozilla' cache ...............................................................[done] Retrieving repository 'update' metadata --------------------------------------------------------------[/]Segmentation fault zypper.log contains, e.g. <snip> 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 Error: signal 11 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [hd]: (-3) /usr/lib64/libzypp.so.1712 : zypp::dumpBacktrace(std::ostream&)+0x39 [0x7f6be32eb399] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [hd]: (-2) /usr/lib64/libzypp.so.1712 : +0x39923b [0x7f6be32a423b] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [hd]: (-1) /lib64/libc.so.6 : +0x361e0 [0x7f6be1dd11e0] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 vvvvvvvvvv---------------------------------------- 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (0) /usr/lib64/libcurl.so.4 : +0x53011 [0x7f6be156e011] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (1) /usr/lib64/libcurl.so.4 : +0x530bf [0x7f6be156e0bf] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (2) /usr/lib64/libcurl.so.4 : +0x538fa [0x7f6be156e8fa] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (3) /usr/lib64/libcurl.so.4 : +0x54b07 [0x7f6be156fb07] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (4) /usr/lib64/libcurl.so.4 : +0x21c39 [0x7f6be153cc39] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (5) /usr/lib64/libcurl.so.4 : +0xf3a8 [0x7f6be152a3a8] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (6) /usr/lib64/libcurl.so.4 : +0x2660f [0x7f6be154160f] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (7) /usr/lib64/libcurl.so.4 : +0x382e3 [0x7f6be15532e3] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (8) /usr/lib64/libcurl.so.4 : curl_multi_perform+0xc3 [0x7f6be1554423] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (9) /usr/lib64/libzypp.so.1712 : zypp::media::multifetchrequest::run(std::vector<zypp::Url, std::allocator<zypp::Url> >&)+0x148 [0x7f6be306b838] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (10) /usr/lib64/libzypp.so.1712 : zypp::media::MediaMultiCurl::multifetch(zypp::filesystem::Pathname const&, _IO_FILE*, std::vector<zypp::Url, std::allocator<zypp::Url> >*, zypp::callback::SendReport<zypp::media::DownloadProgressReport>*, zypp::media::MediaBlockList*, long) const+0x528 [0x7f6be306df38] <snip> ?? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Help with crontab
by Gustav Degreef 04 Oct '19

04 Oct '19

Hello, I am trying to use festival TTS. It needs to be run as a server. The instructions are to enter in a console " sudo crontab -e" command then to add @restart /usr/bin/festival --server Tha is straightforward, but then I don't know how to proceed from there. I read the man page for crontab and it says that once the commands are specified, you have to exit the editor that is specified (I guess in my system) and then the crontab file becomes active. I have no idea where to proceed after I past the command into the window. I tried typing exit, q and control q, but nothing happens. The menu of the window says to save the output, but when I try that it gives a blank box to type a name to save it to. What is the correct way to finish the task Any help would be appreciated. Gustav -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

14 57

[opensuse] Search by content does not work for me.
by Carlos E. R. 04 Oct '19

04 Oct '19

Leap 15.0, XFCE. I don't know what "program" does it, the title of the box says "search for files". There is no "about" box. But in the "ps afxu" list I see that "gnome-search-tool" is running. I select to search: Name contains: *odt Look in folder: cer (that's my home) Select more options contains the text: cucaracha Finds nothing. Which is absurd, I have that LO doc opened, the file does exist. If I try search without a content, also finds nothing. Again absurd, I have many *odt files on my home. I can not see in the entire application menu what to use to configure the search, but I have used it in the past, so it must exist. Anyway, this tool says it uses "find(1), locate(1), grep(1)". Grep? Wasn't there a tool in gnome or xfce that created an index of contents that took a lot of resources, similar to baloo in KDE? What's it name? Ah, tracker. If I run "tracker" nothing happens. It seems to be a CLI program. cer@Telcontar:~> tracker status Currently indexed: 107064 files, 5715 folders Remaining space on database partition: 59,0 GB (56,13%) All data miners are idle, indexing complete cer@Telcontar:~> The rpm description says: tracker - Object database, tag/metadata database, search tool and indexer Tracker is a desktop-neutral object database, tag/metadata database, search tool and indexer. There must be a GUI to it! The wikipedia says "Tracker has been adopted by the GNOME desktop environment and is heavily integrated into GNOME Shell and GNOME Files." Ok, how do I use it? I don't see it in Nautilus (aka gnome files). I see a search button, but I do not see how to search for a file pattern with a certain content. [...] Ok, found it, and it does locate the "cucarachas" files. Not easy at all to find it, and each time I need it I have to search first how to do it... Took an hour! -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

3 4

[opensuse] Cisco ARM
by Roger Oberholtzer 03 Oct '19

03 Oct '19

Does anyone have any experience with Cisco ARM on openSUSE? Especially Tumbleweed? It seems that we may need to run this on any Linux computer that we want to connect to our work network. I see that they support RedHat and CentOS. But often the RedHat stuff will install on openSUSE. At least I am hoping... And maybe they support SUSE, even if I did not see it when I did a quick check. Seems our company is wanting ISO27001 certification. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Start job for home partition times out after upgrading to 20190923 or newer
by Noah Davis 02 Oct '19

02 Oct '19

I'm using Tumbleweed. When I upgrade from snapshot 20190921 to 20190923 or newer (including 20190926), the start job for my home partition (XFS filesystem) times out when I am booting my laptop. This causes my laptop to go into what I assume is a rescue mode where I can enter my root password and run commands. If I comment out my home partition in /etc/fstab, I can get to SDDM, but I can't log in because I don't have access to my home partition. I have looked at `journalctl -xb`, but I could not find anything else about why this happened. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Tumbleweed and NVidia GEFORCE GT610
by Roger Oberholtzer 02 Oct '19

02 Oct '19

I am trying to do a new Tumbleweed install on a system that has a GT610 graphics card. The install fails early on, complaining that /usr/lib64/dri/swrast_dri.so cannot be found. This file does exist in a current Tumbleweed system. So, I am guessing that there are fewer files on the install media. In this case, it is the network installer. Two questions: * Is there a list of supported graphics cards that can be used with tumbleweed (including the install step)? * Might more files be available in the full installer as compared to the network installer? This is a install of a test system. We were just hoping to use what we had at hand for some equipment testing. We need Tumbleweed because many libraries are compatible with Ubuntu 18.04. Don't ask... -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Firefox woes
by Dave Howorth 29 Sep '19

29 Sep '19

I just noticed that uBlock Origin has disappeared from my FF toolbar, and no longer turns up in the context menu either. I noticed that it had auto-updated today so I deleted it and reinstalled it, but still have the same symptoms. Anybody else seeing anything similar? I also discovered that FF will no longer access a whole bunch of websites, including e.g. addons.mozilla.org, whilst I can still ping them in a terminal. I use DoH (DNS over HTTPS) so I changed the mode from 3 (only DoH) to 2 (prefer DoH but fall back to regular DNS) and it all magically started working again. I have no idea what's going on there either, and would welcome any shared experience or suggestions about that as well. I'm running FF 60.8.0esr on Leap 15.0 (I haven't updated it for a while so I expect it isn't quite up to date, but at least I know that it wasn't an FF update that caused my problems.) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Can't Update
by Mark Misulich 26 Sep '19

26 Sep '19

Hi, I just tried to do a zypper dup in terminal to update my opensuse 15.1 system, and I get this response: zypper dup Problem retrieving files from '15.1 repo non-oss'. Permission to access 'http://download.opensuse.org/distribution/leap /15.1/repo/non-oss/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository '15.1 repo non-oss' because of the above error. Problem retrieving files from '15.1 repo oss'. Permission to access 'http://download.opensuse.org/distribution/leap /15.1/repo/oss/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository '15.1 repo oss' because of the above error. Problem retrieving files from 'Fonts'. Permission to access 'http://download.opensuse.org/repositories/M17N :/fonts/openSUSE_Leap_15.1/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository 'Fonts' because of the above error. Problem retrieving files from 'Libreoffice 6.3'. Permission to access 'http://download.opensuse.org/repositories/Libr eOffice:/6.3/openSUSE_Leap_15.1/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository 'Libreoffice 6.3' because of the above error. Problem retrieving files from 'Mozilla'. Permission to access 'http://download.opensuse.org/repositories/mozi lla/openSUSE_Leap_15.1/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository 'Mozilla' because of the above error. Problem retrieving files from 'WlNE'. Permission to access 'http://download.opensuse.org/repositories/Emul ators:/Wine/openSUSE_Leap_15.1/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository 'WlNE' because of the above error. Retrieving repository 'Packman Repository' metadata ..............................[done] Building repository 'Packman Repository' cache ...................................[done] Problem retrieving files from 'Graphics(GIMP)'. Permission to access 'http://download.opensuse.org/repositories/grap hics/openSUSE_Leap_15.1/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository 'Graphics(GIMP)' because of the above error. Problem retrieving files from 'openSUSE-Leap-15.1-Update oss'. Permission to access 'http://download.opensuse.org/update/leap/15.1/ oss/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository 'openSUSE-Leap-15.1-Update oss' because of the above error. Problem retrieving files from 'openSUSE-Leap-15.1-Update-Non-Oss'. Permission to access 'http://download.opensuse.org/update/leap/15.1/ non-oss/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository 'openSUSE-Leap-15.1-Update-Non-Oss' because of the above error. Problem retrieving files from 'snappy'. Permission to access 'https://download.opensuse.org/repositories/sys tem:/snappy/openSUSE_Leap_15.1/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository 'snappy' because of the above error. Problem retrieving files from 'Kernel Standard'. Permission to access 'http://download.opensuse.org/repositories/Kern el:/stable/standard/repodata/repomd.xml' denied. Please see the above error message for a hint. Warning: Skipping repository 'Kernel Standard' because of the above error. Some of the repositories have not been refreshed because of an error. Then I tried to use Firefox to have a look at download.opensuse.org and I received this message on the browser page: Access forbidden! You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster. Error 403 download.opensuse.org Apache/2.4.33 (Linux/SUSE) Trying to use the Software Updates that appear in the panel when the updater icon is clicked, provides the same error message. I am to be locked out of updates, what has happened to openSuse? Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 6

[opensuse] adjust mouse click/double-click timing on Tw
by Patrick Shanahan 25 Sep '19

25 Sep '19

there was mouse configuration in systemsettings5 -> input devices -> mouse to adjust the interval considered for double clicking but is no longer there. lately my mouse, logitech thumb track-ball has become quite touchy with click timing and I wanted to try to lengthen/increase the time delay for double click interval to perhaps solve. how may I now adjust that timing. and I have no /etc/X11/xorg.conf and grep -ir mouse /etc/X11/* has no output or blank output tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 15

[opensuse] Problems with DNSMasq
by Anton Aylward 24 Sep '19

24 Sep '19

I'm using DNSmask lcoally. Mostly it is fine. I have a line in /etc/dnsmasq.conf that read # or if you want it to read another file, as well as /etc/hosts, use # this. addn-hosts=/etc/dnsmasq.d/block.hosts.txt The idea is to have lines like 127.0.0.1 addserver.mtv.com in there so that I don't see adverts. In that, it works. But to get some sites, such as HuffPost.ca, to work, I need to allow and advertising site, guce.advertising.com. So first I commented it out of the file, started the line is a hash - "#" just like works /etc/hosts, and restarted DNSMasq. Well it still go pinged to 127.0.0.1. I presumes it was a TTL issue and waited. No it still came back. That was last night. Its still like that this morning. Now I take the like out of the file altogether. Still the problem. In fact all the lines that begin # 127.0.0.1 are like that. The hash to comment them out isn't working. Now I remove that line altogether from /etc/dnsmasq.conf and restart dnsmasq. But still a ping or nslookiup to those addresses comes back as 127.0.0.1 TTL? Cache? -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] 15.1 System freezes
by Daniel Bauer 24 Sep '19

24 Sep '19

Hello, My OS 15.1 desktop computer with nvidia goes crazy since yesterday. After two or three days without reboot the KDE desktop suddenly freezed. I had to reset per hardware button. After reboot I used zypper up to bring the system to the latest updates. Now it freezes from time to time: after some minutes of working (browsers, or email, or digikam) it gets unresponsive. First the mouse cursor doesn't move. After a minute or two the cursor moves a bit, but immediately freezes again. After a while the cursor disappears. The keyboard doesn't respond to anything. After a reboot (or if I log out and in again) the "greeting page" (the kde login page) showns scrambled: only a part, or artifacts, or a white screen with a black border - creatively changing each time. I can enter the password and hit enter and get the desktop. After a short while it freezes for a second and shows a message like "kde display restarted" (could not read it really, was shown too short). When clicking in the menu "log out" the question "log in out in 30 seconds" is shown but the two buttons below are not visible or scrambled. I can hit enter though. At the moment the system is in an unusable state. Where can I look for what happened? What to search for? What data can I provide here so that somebody can help me? Where/how do I find this data? Thanks for your help. I'll check mail when 15.1 allows... Daniel -- Daniel Bauer photographer Basel Málaga https://www.patreon.com/danielbauer https://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 40

[opensuse] bash script needed to rename a series of files
by Patrick Shanahan 24 Sep '19

24 Sep '19

I have erred and need help to correct. I need to rename a series of files baseed on another series of files which contain 12 matching characters: to be renamed: dse_7905.nef.xmp dse_7906.nef.xmp dse_7907.nef.xmp dse_7908.nef.xmp dse_7910.nef.xmp dse_7915.nef.xmp dse_7916.nef.xmp dse_7917.nef.xmp dse_7919.nef.xmp dse_7920.nef.xmp names to be matched: 190921_094704_dse_7905.nef 190921_094704_dse_7906.nef 190921_094713_dse_7907.nef 190921_094717_dse_7908.nef 190921_094805_dse_7910.nef 190921_094831_dse_7915.nef 190921_094834_dse_7916.nef 190921_094834_dse_7917.nef 190921_094836_dse_7919.nef 190921_094843_dse_7920.nef so I end up with: 190921_094704_dse_7905.nef 190921_094704_dse_7905.nef.xmp 190921_094704_dse_7906.nef 190921_094704_dse_7906.nef.xmp 190921_094713_dse_7907.nef 190921_094713_dse_7907.nef.xmp 190921_094717_dse_7908.nef 190921_094717_dse_7908.nef.xmp 190921_094805_dse_7910.nef 190921_094805_dse_7910.nef.xmp 190921_094831_dse_7915.nef 190921_094831_dse_7915.nef.xmp 190921_094834_dse_7916.nef 190921_094834_dse_7916.nef.xmp 190921_094834_dse_7917.nef 190921_094834_dse_7917.nef.xmp 190921_094836_dse_7919.nef 190921_094836_dse_7919.nef.xmp 190921_094843_dse_7920.nef 190921_094843_dse_7920.nef.xmp tks much, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 9

[opensuse] nvidia vs nouveau on 15.1
by Mark Hounschell 23 Sep '19

23 Sep '19

I just upgraded a 15.0 install to 15.1. I am using an NVIDIA Corporation G70 [GeForce 7800 GT] (rev a1) and the nvidia-304.137 kernel driver from nvidia. I've been patching this driver for use on the latest kernels for some time now. In fact on the 15.0 installation I am using it with a vanilla 5.3.0 kernel with no issues. The reason I cannot use the on kernel nouveau driver is because I can't get it to support multiple screens. Every monitor connected has the same thing displayed. On the 15.1 box after the upgrade from 15.0 I get this in the Xorg.0.log log file. [ 21.746] ================ WARNING WARNING WARNING WARNING ================ [ 21.746] This server has a video driver ABI version of 24.0 that this driver does not officially support. Please check http://www.nvidia.com/ for driver updates or downgrade to an X server with a supported driver ABI. [ 21.746] ================================================================= [ 21.746] (EE) NVIDIA: Use the -ignoreABI option to override this check. My question is how do I implement this "-ignoreABI" thing to override this check? Or maybe a better question might be why does the nouveau driver not support multiple screens multiple monitors? Or am I wrong there and just don't know how to configure it? "Settings/Configure-Desktop" is certainly no help there. Thanks Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 26

[opensuse] strange messages on the cli
by stakanov 22 Sep '19

22 Sep '19

Got these messages and I am no really proficient to understand what is going on. I suppose a problem with powersaving mechanisms? Message from syslogd@roadrunner at Sep 19 22:29:33 ... kernel:[ 4327.005544] Uhhuh. NMI received for unknown reason 30 on CPU 0. Message from syslogd@roadrunner at Sep 19 22:29:33 ... kernel:[ 4327.005545] Do you have a strange power saving mode enabled? Message from syslogd@roadrunner at Sep 19 22:29:33 ... kernel:[ 4327.005546] Dazed and confused, but trying to continue Any comment? _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 7

[opensuse] virtual machine manager display twice a virtual machine?
by Simon Becherer 21 Sep '19

21 Sep '19

Hi, i have some virtual machines running at one computer. (qemu with virtual machine manager, and display spice) when i would see the virtual-machines, i use from another computer: ssh -X name-of-system-where-virtual-machines-are-running /usr/bin/virt-manager the virtual manager will popup and i click on "open" for the specific virtual machine. all fine so far. but sometimes it would be good to have had one virtual-system on 2 different computers shown (open) at same time. this did not work. if i use the ssh command from another system, it will disconnect the virtual machine from the computer i have seen it before. so my question is, how to tell spice to show simultaneous the virtual machine on different computers? i do not see anything useful inside the virtual manager tab "display-spice" did i have to change some configuration files manually inside /etc/libvirt/ ? simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

Re: [opensuse] nvidia vs nouveau on 15.1
by Mark Hounschell 19 Sep '19

19 Sep '19

I'm sorry for not hitting respond to list. My bad. On 9/19/19 1:07 PM, Andrei Borzenkov wrote: . . >>> You start X server with this option. How to add this option depends on >>> your display manager. >>> >>> You may try adding >>> >>> Section "ServerFlags" >>> Options "IgnoreABI" "true" >>> EndSection >>> >>> to /etc/xorg.conf.d. >>> >>> See "man xorg.conf.d". >>> >> >> To which file in /etc/xorg.conf.d should I add that? I find none that >> have a ServerFlags section. >> > > Just create new file. Name is up to you (must have .conf extension). > I'll give it a try asap then. >>>> Or maybe a better question might be why does the nouveau driver not >>>> support multiple >>>> screens multiple monitors? >>> >>> "Screen" in X11 refers to separate video card with connected monitor. If >>> you have single card with multiple displays, this is handled by RandR >>> today (which is behind display/screen configuration in desktop >>> environment). Showing "xrandr --listmonitors" with nouveau would be a >>> good start. >>> >> >> With the system still running 15.0, the nvidia driver, and kernel 5.3.0 >> #xrandr --listmonitors >> Monitors: 2 >> 0: +*DVI-I-2 1600/367x1200/275+0+0 DVI-I-2 >> 1: +DVI-I-3 1600/367x1200/275+1600+0 DVI-I-3 >> >> With the same system running 15.1 (fresh install on test disk) using >> nouveau >> #xrandr --listmonitors >> xrandr: Failed to get size of gamma for output default >> Monitors: 1 >> 0: +*default 1280/339x1024/271+0+0 default >> > ... >>> >> >> On the 15.1 system, if I don't use nosetmode I get a gui login screen >> but can not get a desktop after logging in. >> > > > Without KMS xrandr output is pretty much irrelevant. > > Try different desktop, XFCE or LXDE. It may be kernel, it may be your > desktop. You need to find out. > If it is the kernel, then it's all of them. > In any case, if it worked with nouveau on 15.0 and does not work on 15.1 > it is regression and needs bug report. > I never said it worked on 15.0 using nouveau. It works on 15.0 using nvidia. But the X11 on 15.1 complains about my nvidia revision being not supported. I've NEVER been able to have this work without the nvidia drivers. I have different nvidia cards around also. It only works right using the nvidia drivers. Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Fwd: [opensuse-factory] Default browser: chromium?
by Carlos E. R. 19 Sep '19

19 Sep '19

This should be of your interest. Please send replies to the factory list. -------- Forwarded Message -------- Subject: [opensuse-factory] Default browser: chromium? Date: Thu, 19 Sep 2019 10:54:40 +0000 From: Tomas Chvatal <TChvatal(a)suse.com> To: opensuse-factory(a)opensuse.org <opensuse-factory(a)opensuse.org> Hi, Let the flamewar begin! No really I was now watching the people rightfully complaining I've sent a borked chromium to latest TW snapshot and was wondering how popular the browsers are and whether we should not set the chromium instead of firefox as default or to keep them both on the dvd tested... In order to even start some process lets all vote in a poll for what is your default browser between the two (yes yes you can use the Vivaldi or even w3m, but honestly the chromium or ff are the two used by the majority of the people around). So if I could get you to vote in my lovely poll: https://doodle.com/poll/nnn53kkryghdvc84 I will make the results hidden so people won't start to game the system too much and the results will be announced here at the beginning of the October. Cheers Tom

1 0

[opensuse] copying .exe to Win 10?
by Doug McGarrett 18 Sep '19

18 Sep '19

Why can't I copy a downloaded .exe file to Windows 10 on the same drive? I can access the Windows partition from Thunderbird super-user Dolphin, but I mark a file to copy and try to paste in the Windows partition, but it is grayed out. What am I doing wrong? Thanx for your help--doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 20

[opensuse] Unwanted IPv6 address - 15.1
by James Knott 18 Sep '19

18 Sep '19

Somehow my notebook has managed to acquire an unwanted IPv6 address. It has a /128 prefix and is similar to the one assigned to my firewall. I assumed this happened when I connected the computer directly to the modem, rather than the local network. Any idea how I can get rid of this? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] lvm is dumping core - a lot
by Mathias Homann 18 Sep '19

18 Sep '19

Hi guys, I'm finding a lot of this in my logs: Sep 14 21:08:43 akari kernel: lvm[21398]: segfault at 5a ip 00007f1477d7346f sp 00007ffe4a3032b8 error 4 in libc-2.26.so[7f1477cd1000+1b1000] Sep 14 21:08:44 akari systemd-coredump[21400]: Process 21398 (lvm) of user 0 dumped core. And I mean a LOT. as in, once every two seconds for a period of two minutes, seems to happen during recreation of the boot ramdisk after installing packages with modues that go into it. Any ideas? openSUSE Leap 15.0, all updates applied, system is using LVM on four harddisks... Cheers Mathias *Mathias Homann* Mathias.Homann(a)openSUSE.org[1] telegram: https://telegram.me/lemmy98[2] irc: [lemmy] on freenode and ircnet obs: lemmy04 *gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102 * -------- [1] mailto:Mathias.Homann@eregion.de [2] https://telegram.me/lemmy98 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Command line pdf reader - zathura - vi like interface - pretty amazing!
by David C. Rankin 18 Sep '19

18 Sep '19

All, This is one of those stray tips e-mail for anybody who spends time on the command line and every wanted a pretty amazing command line pdf reader. zathura is it, and it is a vi like interface that is pretty damn amazing. I stumbled across it looking into pdftohtml and somehow found a link to zathura. For opensuse it is in the X11 Utilities repo: http://download.opensuse.org/repositories/X11:/Utilities/ Just # zypper in zathura zathura-plugin-pdf-poppler zathura-plugin-ps for both the pdf and ps reader (you can also choose mupdf instead of poppler) The entire install is ~600K (not even 1M). pdf rendering is great. You can tweak the config by adding 'set' commands to ~/.config/zathura/zathurarc (none by default). I just added: set font "monospace normal 8" to drop the vi-style command line font from default 9 to 8pt. Full man pages provided with 'man zathurarc' for the config options. I don't pass along many stray tips, but after using Linux for so many years and never running across zathura before -- I'll be many are in the same boat. (also works fine over ssh with ssh -Y (or -X) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] copying .exe to Win 10?
by Carlos E. R. 17 Sep '19

17 Sep '19

You forgot to mail to the list. On 17/09/2019 22.26, Doug McGarrett wrote: > On 09/16/2019 03:35 PM, Carlos E. R. wrote: >> Now, as to the reason why it is mounted ro, it usually means that it is >> not clean, and probably the advice you got about what to do in Windows >> are correct. We can make certain, though. Do: >> >> # umount -v /dev/sda >> # mkdir /run/media/root/BBB >> # mount -v /dev/sda4 /run/media/root/BBB >> # journalctl | tail -20 >> >> And post here the entire sequence with the results, in a single mouse >> swipe operation. Just one paste. This is quick to do, I'll wait for it. >> > ONly got partway: > > linux-4qnb:~ # umount -v /dev/sda > umount: /dev/sda: not mounted. As you can see from my reply to Dave Howorth, it is sda4. > linux-4qnb:~ # mkdir /run/media/root/BBB > mkdir: cannot create directory ‘/run/media/root/BBB’: No such file or > directory Now this is strange. Well, use any other directory, invent the name. # mkdir ~/somedir -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

1 0

[opensuse] Two graphic cards, how to get them to work?
by Karl Sinn 17 Sep '19

17 Sep '19

Hi, Leap 15.0 I installed a second graphic card in my system and plugged my second monitor in the new card. I followed https://en.opensuse.org/ATI as good as possible but I kind of don't get the second card to do anything. Here's my cards: lspci -nn | grep VGA 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119 [GeForce GT 610] [10de:104a] (rev a1) 03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280] [1002:679a] The NVIDIA card was first is still running fine. I installed xf86-video-amdgpu and rebooted the computer. Now here: https://en.opensuse.org/SDB:AMDGPU in the Hybrid section is information that might be the key for my problem. It says that the boot loader might need parameters. Here's the output of: xrandr --listproviders Providers: number : 2 Provider 0: id: 0x31e; cap: 0x1 (Source Output); crtcs: 2; outputs: 4; associated providers: 0; name: NVIDIA-0 output DVI-I-0 output VGA-0 output DVI-I-1 output HDMI-0 Provider 1: id: 0x367; cap: 0xf (Source Output, Sink Output, Source Offload, Sink Offload); crtcs: 6; outputs: 4; associated providers: 0; name: modesetting output 0x363 output 0x364 output 0x365 output 0x366 It looks like the two cards are being discovered but only the NVIDIA card is actually active. According to these instructions I might have to add something like amdgpu.si_support=1 to the bootloader settings. I'm completely unsure about this, that's why before I try this and mess up things I would like to know if I go in the right direction. thanks, Karl -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 15

Re: [opensuse] copying .exe to Win 10?
by Carlos E. R. 17 Sep '19

17 Sep '19

On 15/09/2019 23.43, Doug McGarrett wrote: > > > On 09/15/2019 05:11 PM, Carlos E. R. wrote: >> On 15/09/2019 23.05, Doug McGarrett wrote: >>> 2. From a root terminal, mount -v /dev/sda4 comes back with message >>> "Not found in fstab", which is true, and mount -v all produces the same >>> thing. I looked at the fstab file and it's complicated! Now what? >> >> I did not say "mount -v /dev/sda4". I said "mount -v". Please pay >> attention. > > You said mount -v and "paste here a line for the windows partition or > all if I don't know what it is." I know it's /dev/sda4. > I just entered (this time) mount -v and I got a many-line output. Then > linux-4qnb:~ # /dev/sda4 > -bash: /dev/sda4: Permission denied > The all command gets rejected altogether. Please, just do exactly what I asked. Type into a terminal just this exact line: mount -v and paste all of it here here. Nothing more, nothing less. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

4 6

[opensuse] What plays a .3gp video file from a phone?
by David C. Rankin 16 Sep '19

16 Sep '19

All, I don't mess with video often, but I have a video I have received from a client documenting a date and time for a custody/visitation pickup and it is in .3gp format. VLC claims it doesn't have h264 (part 10) and mp4a codecs. VLC is from videolan, not packman. Do I need to change repos? If so, how do I switch all to packman? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

Re: [opensuse] copying .exe to Win 10?
by DennisG 16 Sep '19

16 Sep '19

> > On 9/15/19 5:05 PM, Doug McGarrett wrote: >> >> 1. I have a quite recent Windows 10 (new computer) and the "save >> changes" is grayed out, so I can't turn off the fast boot that way, >> and I tried holding down the shift key while selected the power down >> or whatever it's called from the menu, but that didn't work. There['s >> probably a file that could be edited, but I have no idea what or what >> the edit would look like. > > W10 can be quirky this way, and not just for the power options. Try: > Under Power Options/System Settings panel, click on "Change settings > that are currently unavailable", that might release the Save button. > >> 2. From a root terminal, mount -v /dev/sda4 comes back with message >> "Not found in fstab", which is true, and mount -v all produces the >> same thing. I looked at the fstab file and it's complicated! Now what? > > mount -v /dev/sda4 will only show the mount point, or if not mounted, > the error you produced. mount -v (which was asked for before, w/o > partition name) will return all mounted partitions. If you are trying > to mount the w10 partition rw, you can use: mount -t ntfs /dev/sda4 -o > rw <filesystem mount point> > > --dg An afterthought fwiw . . . imo writing to the Windows "C: Drive" is best avoided if possible - Windows has often been finicky about that. Assuming you have ample storage on your new machine, you might consider creating a separate ntfs rw partition for data, and leave the C: partition ro or don't mount it at all unless absolutely necessary. And btw there is a feature in windows that permits redirecting the default data folders (Documents, Downloads, etc.) to a different tree and (if desired) on another partition. Over the years I've found using these techniques helpful in avoiding unpleasant surprises from Microsoft. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

Re: [opensuse] copying .exe to Win 10?
by DennisG 16 Sep '19

16 Sep '19

On 9/15/19 5:05 PM, Doug McGarrett wrote: > On 09/15/2019 09:06 AM, Carlos E. R. wrote: >> On 15/09/2019 06.26, Doug McGarrett wrote: >>> Why can't I copy a downloaded .exe file to Windows 10 on the same >>> drive? >>> I can access the Windows partition from Thunderbird super-user Dolphin, >>> but I mark a file to copy and try to paste in the Windows partition, >>> but >>> it is grayed out. What am I doing wrong? >> >> Open a terminal and run the command "mount -v". Paste here the line for >> the windows partition, or all if you don't know which it is. > > 1. I have a quite recent Windows 10 (new computer) and the "save > changes" is grayed out, so I can't turn off the fast boot that way, > and I tried holding down the shift key while selected the power down > or whatever it's called from the menu, but that didn't work. There['s > probably a file that could be edited, but I have no idea what or what > the edit would look like. W10 can be quirky this way, and not just for the power options. Try: Under Power Options/System Settings panel, click on "Change settings that are currently unavailable", that might release the Save button. > 2. From a root terminal, mount -v /dev/sda4 comes back with message > "Not found in fstab", which is true, and mount -v all produces the > same thing. I looked at the fstab file and it's complicated! Now what? mount -v /dev/sda4 will only show the mount point, or if not mounted, the error you produced. mount -v (which was asked for before, w/o partition name) will return all mounted partitions. If you are trying to mount the w10 partition rw, you can use: mount -t ntfs /dev/sda4 -o rw <filesystem mount point> > >> >> Most likely, the partition is mounted read-only (or not mounted) because >> Windows was stopped in fast boot mode (it is the default). The quick way >> to avoid that is to power up windows, then reboot to Linux directly, not >> halt or power off. >> > > 3. I'll try this latter, but I don't quite understand. I can't boot into > Linux from a running Windows system, can I? If so, how? > > Thanx for the comeback. Damn Windows anyway! > > --doug > --dg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] susepaste - Paste failed :-( ??
by David C. Rankin 15 Sep '19

15 Sep '19

All, I've used susepaste for a while and have had no issues. Today it is: Paste failed :-( Anyone else seeing this? Example: $ susepaste -n "David C Rankin" -t "HarrySally" -e 40320 -f c ~/dev/src-c/tmp/debug/harrysally.c Paste failed :-( -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 12

[opensuse] scanner, one more time--success!
by Doug McGarrett 14 Sep '19

14 Sep '19

Downloaded the Epson scanner package for V300 scanner: iscan-gt-f720-bundle-2.30.4.x64.rpm and followed the directions for installing it, using the install.sh package. That worked out well, for the Epson WP-4530 all-in-one and it accesses the V300, but something is wrong with the V300 and it only produces a black rectangular blob. I have to see if there is a maintenance manual for that, since I want to be able to print from Ektachrome slides. Anyway, XSane now works as it should, and finds both scanners. In the meantime, I also bought Vue-Scan, but it doesn't like to let me fill out the 3-element registration. I guess that's money wasted. And, it turns out, I like the XSane interface better anyway. --doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] KDE setting for the shape of tabs?
by Per Jessen 14 Sep '19

14 Sep '19

Is there a way of getting the nicely rounded tabs back? I really don't like the square boxes with the blue top bar. -- Per Jessen, Zürich (17.1°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 13

[opensuse] No NetworkManager-applet connected icon in Xfce notification area
by Markus Kolb 13 Sep '19

13 Sep '19

Hey, I'm running Xfce on Leap 15.1. In the notification area panel is the NetworkManager-applet. But there is only a visible icon if network is disconnected or during connecting there is an animation. In state connected there is only empty space in the panel and no visible icon. That's a little bit ugly. Do I miss any package? Do you know the cause? Thanks Markus -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Migrating 42.3 o 15.0 using zypper
by Anton Aylward 12 Sep '19

12 Sep '19

Migrating 42.3 o 15.0 using zypper I've cloned the set of /etc/zypp/repos.d and updated them to to point to the 15.0 repositories. What I'm looking for is a zypper dist-update --use-repos /etc/zypp/15DOTZERO.repos.d but I don't see an option like that, pointing to another set of repos. What am I missing? -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Help! 15.1 System unusable due to KDE freezes
by Daniel Bauer 11 Sep '19

11 Sep '19

Hi I write from my laptop because my desktop computer has become unusable all of a sudden. It is OS 15.1 with latest updated KDE, with an Nvidia-Card. I had similar problems before, but then I thought I found the solution changing compositor version - but the fun only was for 7 days (in which I didn't reboot). This morning, after entering the password in the creen that comes after a while of inactivity, the desktop froze. I logged out and the password page showed completely scrambled. After logging in it froze again. I rebooted several times, always the same result. I let the computer down for half an hour, booted, and happily enjoyed it - for some time. Now, it's frozen again... Mouse doesn't move, keyboard is dead, but I can SSH to it from the laptop. Immediately after logging in as root via SSH I typed "dmesg" and copied the result. I didn't shorten it, because I don't know from when those messages are and which are important. I also copied /var/log/messages since the last boot: https://www.daniel-bauer.com/div/dmesg.txt https://www.daniel-bauer.com/div/mesages.txt Right now the computer - my only working place - is unusable and I hope somebody can give me a hint on what happened and what I can do. Thanks a lot! Daniel -- Daniel Bauer photographer Basel Málaga https://www.patreon.com/danielbauer https://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 42

[opensuse] Account
by Marco Flores 10 Sep '19

10 Sep '19

Does anyone know where the openSUSE account's setting are? This to change my password. Best regards. -- Marco "AlpVonKri" Flores Computer Systems Engineer alpvonkri(a)protonmail.com https://t.me/AlpVonKri Blumen Sistemas y Servicios https://fb.com/BlumenSisSer openSUSE marco.flores(a)opensuse.org http://www.opensuse.org This email and any file transmitted in it are confidential and intended exclusively for the use of the person or entity to whom they are directed. If you have received this email by mistake, please notify the sender. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 7

[opensuse] [packman] PMBS move - now for real! (fwd)
by Carlos E. R. 10 Sep '19

10 Sep '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 This may be of interest. - ---------- Forwarded message ---------- Date: Tue, 10 Sep 2019 14:13:38 +0200 From: Stefan Botter <jsj(a)jsj.dyndns.org> To: packman(a)links2linux.de Subject: [packman] PMBS move - now for real! Hi packmans, I will move packman tomorrow, Wednesday, Sep 11th, starting at 6 p.m. CEST (4 p.m. GMT). Transmission will take anything between 8 and 12 hours, and on Thursday morning I will set up access to the new location. Please do not expect PMBS back before Thursday noon, and as usual there will be omissions on my side, and there will be complications. I will send another reminder tomorrow, and of course announce, when it is back up. Greetings, Stefan - -- Stefan Botter zu Hause Bremen -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXXeffRwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVz2oAoJPMZGHdczajLJavP0Bl vRYOqIo0AJ41/Ne/AYNM5d9QWjtQKdidG0Cm1w== =8Xqm -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] was: Help! 15.1 System unusable. Old NVidia card
by Patrick Shanahan 10 Sep '19

10 Sep '19

* Carlos E. R. <robin.listas(a)telefonica.net> [09-09-19 07:50]: > On 09/09/2019 09.55, Daniel Bauer wrote: > > > > > >> > > > > According to the answer I received in the opensuse bug > > http://bugzilla.opensuse.org/show_bug.cgi?id=1142971 > > "Unfortunately your gfxcard is no longer supported by the current > > driver" ... > > > > Well, I was looking at the nvidia driver page and it recommended > > NVIDIA-Linux-x86_64-390.129.run for this card. But exactly the same > > problems happened as with the g04 driver from opensuse rpm's. > > which means that the driver might not support features that KDE uses. > Educated wild guess. > > I got the same reply about my nvidia card, and it results, for instance, > that I can no longer install the fgfs game. > > Card too old. So my next computer will have AMD cpu (because of the > intel bugs) and AMD graphics. what card, Carlos? I am still using a GTX 450 w/o any problem and heavily working graphics images, driver: NVIDIA-Linux-x86_64-390.129.run never got a msg about missing features or too old. but yes, using the "hard way" install with dkms. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Somebody please contact this Suse person?
by Carlos E. R. 10 Sep '19

10 Sep '19

I'm getting this bounces all day to mail posted to this list: Delivery has failed to these recipients or groups: groupwise-Rob.Knight@suse.com:1:1 There's a problem with the recipient's mailbox. Please try resending the message. If the problem continues, please contact your email admin. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

4 4

[opensuse] Setting Chromium flags via Plasma app launcher
by Oleksii Vilchanskyi 09 Sep '19

09 Sep '19

I cannot set Chromium flags in a way so that when I press the icon "Web Browser (subtitle: Chromium)" in Plasma Application Launcher they actually are applied onto the application. What I have tried: Attempt 1: Context menu -> Edit application -> application -> command -> "chromium --disable-font-subpixel-positioning %u" Attempt 2: Context menu -> Edit application -> application -> command -> "chromium %u --disable-font-subpixel-positioning" Attempt 3: Context menu -> Edit application -> application -> advanced options -> run in terminal -> terminal options -> "--disable-font-subpixel-positioning" None of it works. This is insane. What does work: $ export CHROMIUM_USER_FLAGS="--disable-font-subpixel-positioning" $ chromium&| If you look at /usr/bin/chromium, you'll see why it works. Even when I export this variable in user's zshrc (yes I did relogin) and "run in terminal" is ticked, the envvar is _still_ ignored. Makes me wonder under which user the application launcher is launching applications. So, how do I make it work in the application launcher? Tumbleweed 20190907 -- Regards, Oleksii Vilchanskyi -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] leap 15.1 - unable to stat pan - GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name news.pan.NZB was not provided by any .service files
by Per Jessen 09 Sep '19

09 Sep '19

After upgrading (I believe), pan has become faulty, see $SUBJ. Which upgrade I cannot say, except that pan worked in May this year. I've googled $SUBJ, and seen some suggestions that removing ~/.pan2/tasks.nzb would alleviate the problem, but it did not. I am hesitant about removing ~/.pan2 completely, I'd like to keep my settings. Any other suggestions? thanks Per -- Per Jessen, Zürich (18.1°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 22

[opensuse] Encrypted swap with random key no longer working in Leap-15.1?
by Josef Wolf 09 Sep '19

09 Sep '19

Hello, For many years, I am using encrypted swap partition with a random key to avoid typing the password at boot time. Now I reinstalled openSUSE Leap 15.1, and this no longer works. I always have to type the password when booting. This is well documented in crypttab(5) and I am using it like this: raven:/ # grep swap /etc/crypttab cr_ata-ST3250310AS_6RYB6W7W-part7 UUID=a71035e1-abe3-4cb0-bee9-af42787c40cf /dev/urandom swap raven:/ # Any ideas/suggestions how to track this down? -- Josef Wolf jw(a)raven.inka.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 10

[opensuse] fetchmail/gmail problems
by Patrick Shanahan 08 Sep '19

08 Sep '19

substituted <user> my server running fetchmail has stopped getting mail from gmail: fetchmail: timeout after 45 seconds waiting to connect to server imap.gmail.com. fetchmail: socket error while fetching from <user>@imap.gmail.com fetchmail: Query status=2 (SOCKET) poll imap.gmail.com nodns tracepolls with proto IMAP port 993 timeout 45 user '<user>@gmail.com' there with password 'tuscolai' is \ 'paka' here options fetchall stripcr sslproto tls1 ssl sslcertck mda '/usr/lib/sendmail -i -oem -f %F %T' antispam 571 550 501 554 above has worked for quite some years w/o a problem and I cannot figure it out ????? It failed beginning night before last, but worked for about 3 hours yesterday and then kaputtt. fetchmail-6.3.26-91.3.x86_64 maybe old, server is 42.2 tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 53

[opensuse] How to permanently disable apache2-mod_php7?
by Bjoern Voigt 07 Sep '19

07 Sep '19

Since I use PHP7-FPM, I do not need the Apache/PHP module apache2-mod_php7. But there are some dependencies to apache2-mod_php7, so I get apache2-mod_php7 automatically: # rpm -e --test apache2-mod_php7 error: Failed dependencies: apache2-mod_php7 is needed by (installed) mythweb-29-1.2.noarch mod_php_any >= 7.0.0 is needed by (installed) nextcloud-16.0.4-81.1.noarch mod_php_any < 7.4.0 is needed by (installed) nextcloud-16.0.4-81.1.noarch I installed apache2-mod_php7 and disabled it with "a2dismod php7". Unfortunately the RPM postinstall script re-enables apache2-mod_php7 after every update of this package. # rpm -q --scripts apache2-mod_php7 #some distro versions does not have this tool. if [ -x /usr/sbin/a2enmod ]; then if a2enmod -q php5 && ! a2enmod -q php7; then a2dismod php5 a2enmod php7 fi fi [...] My work-around is this: # zypper dup; a2dismod php7 Are there better solutions? Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] LibreOffice bad cursor positioning problem
by Carlos E. R. 07 Sep '19

07 Sep '19

Hi, My Libre Office writer has developed a bad problem: when I type, the letters appear a position or two to the left of the cursor. With different fonts. This impedes editing badly. A restart of the program, that has been running for two days, restored normality. Another day I observed problems with styles: impossible to apply default style settings to paragraphs, so that different paragraphs got different appearance, despite having the same style, and I cleared direct formatting. I had to create a new document and copy over the paragraphs without style. What is going on? Using Leap 15.0 with default LO. Version: 6.2.5.2 Build ID: 20(Build:2) CPU threads: 4; OS: Linux 4.12; UI render: default; VCL: gtk3; Locale: es-ES (en_US.UTF-8); UI-Language: en-US Calc: threaded -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

2 1

[opensuse] App:Geo - Unable to differentiate between two repos
by Chris Coutinho 06 Sep '19

06 Sep '19

Hello, I recently installed QGIS from the Application:Geo devel project on Tumbleweed, and in addition to the App:Geo repo I also subscribed to another seemingly identical repo: $ zypper lr -EU | awk -F'|' '{print $3 $7}' | grep 'opensuse.org' | rg -v home | sort Application:Geo http://download.opensuse.org/repositories/Application:/Geo/openSUSE_Tumblew… Main Repository (NON-OSS) http://download.opensuse.org/tumbleweed/repo/non-oss/ Main Repository (OSS) http://download.opensuse.org/tumbleweed/repo/oss/ Main Update Repository http://download.opensuse.org/update/tumbleweed/ openSUSE:Tumbleweed http://download.opensuse.org/repositories/openSUSE:/Tumbleweed/standard/ Software for Scientists and Engineers (openSUSE_Tumbleweed) http://download.opensuse.org/repositories/science/openSUSE_Tumbleweed/ Does anyone know what the 'openSUSE:Tumbleweed' repo is in this context, and why does App:Geo depend on it? I can't find it anywhere on the project page at build.opensuse.org, and looking at the contents it seems almost identical to the 'Main Repository (OSS)' Regards, Chris

5 8

[opensuse] Opening links from email - what browser?
by Carlos E. R. 06 Sep '19

06 Sep '19

Hi, Seeing that my Firefox was bloated with a large number of tabs, I created a new FF profile and started fresh, with just a few tabs. Fine. But there is a nuisance: I can not click on links in email (Thunderbird and others): they insist in opening the full "Default" FF profile with a ton of windows and tabs, instead of opening a new tab in the already running FF instance. How can I change that? XFCE, Leap 15.0 -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

3 4

[opensuse] is ubuntu better than opensuse 15.1?
by Daniel Bauer 05 Sep '19

05 Sep '19

Hi, unfortunately quite working 42.3 had to be replaced with 15.1 due to end of security updates which are important to me. Now, this system seems not to be able to handle my Nvidia GeForce GTX 460. It freezes all the time. If it doesn't freeze the desktop effects get switched off due to "restart of graphics". When I log out and in, the desktop icons spread somehow over the screen and I have to reorder them - each and every time. Bug reports are not seen, obviously. Problem is, that this is my working computer and since two days I simply cannot work with it. I know that Opensuse cuts functionality in each release since 13.x, but I didn't imagine that it simply would stop being usable at all. Now I have two possibilities: - buy another graphics card that will maybe work a year or two until OpenSuse decides to stop working with it, too. - install another operating system. Both possibilities are complicated. I am with openSuse since 20 years, and it has always bettered until the regression started from 13.x. I'd have to learn a new system. Windows is excluded, as it makes me sick. So could be ubuntu? A new graphics card is expensive (I need quite a lot of power). Also I don't have any idea which one. One that fulfills my needs on one side, and that is supported by OpenSuse which I think is not really made anymore for a graphic desktop, more for a pure console computer, server or the like. What do you recommend? Give it a try with ubuntu? Buy another graphics card? Which? -- Daniel Bauer photographer Basel Málaga https://www.patreon.com/danielbauer https://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

16 59

[opensuse] setenv DISPLAY $HOST:0.0
by Wolfgang Mueller 05 Sep '19

05 Sep '19

Under Leap 15.1 any attempt to open the display with a $DISPLAY value different from :0.0 fails and generates the answer: <program>: can't open display <HOST>:0.0, aborting Under 13.2, an efficient work around was removing "-nolisten tcp" from the files /etc/X11/xinit/xserverrc and /etc/X11/xdm/Xservers as follows: diff /etc/X11/xinit/xserverrc /etc/X11/xinit/xserverrc.bak < args="$args" --- > args="$args -nolisten tcp" ------------------------------------------------------------- diff /etc/X11/xdm/Xservers /etc/X11/xdm/Xservers.bak < :0 local /usr/bin/X -br vt7 -keeptty --- > :0 local /usr/bin/X -nolisten tcp -br vt7 -keeptty But these modifications do not help any more, because the failure not only happens at a request from outside (TCP) but also at a local request. What can I do to provide "setenv DISPLAY $HOST:0.0" making sense under Leap 15.1? Thanks in advance, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] ssh without passwd
by Wolfgang Mueller 05 Sep '19

05 Sep '19

"ssh-keygen" generated ~/.ssh/id_rsa and ~/.ssh/id_rsa.pub Then ~/.ssh/id_rsa.pub has been copied to the remote site and given the name ~/.ssh/authorized_keys there. Whereas ssh without password from a SuSE 13.2 site to a Leap 15.1 site works perfectly for any user, from a Leap 15.1 site to a SuSE 13.2 site it works for root only, and different users are asked for a password. How can I achieve ssh to be accepted without password for "normal" users, too? Thanks in advance for your help. Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 18

[opensuse] Can I find the percent of cpu load for a process in a script?
by Carlos E. R. 04 Sep '19

04 Sep '19

Hi, Can I find the percent of cpu load for a process inside a script? At worst, I can find it out from "top", but I wonder if there is a more direct way. I'm looking at "/proc/21500/stat" or "/proc/21500/statm", but I have no idea what each value is, where are those virtual files documented. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

8 14

[opensuse] Flash is still used today
by Carlos E. R. 04 Sep '19

04 Sep '19

Incredible. I just hit a news site that requires flash from adobe, TODAY. :-( I'm using a new firefox instance, no plugins yet, so no flash support, I suppose. <https://cadenaser.com/emisora/2019/08/27/radio_cartagena/1566895744_214802.…> (no , I'm not asking how to add flash support... (yet)... just saying that today there are sites that still use it. I'm flabergasted) (Chrome plays it) -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

8 35

[opensuse] Updating FF 60.8esr - 68.0esr - anybody notice font rendering change on Linux?
by David C. Rankin 04 Sep '19

04 Sep '19

All, I updated from FF 60.8esr to 68.0esr on one box and had font size render approximately 1-2 points smaller in the new version. Has anyone else seen this? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] YaST language confusion
by gumb 03 Sep '19

03 Sep '19

New install, Leap 15.1. Just getting basics set up. I generally use English (GB) for all system setup and desktop interface elements, with French added as a keyboard layout and/or for secondary language support. So after looking yesterday in YaST -> Software Management and viewing the Language tab, I scrolled down to fr and ticked 4 or 5 additional French packages, including yast2-trans-fr. Today when I start YaST, all the menus are in French. Ok, I can use it, but I prefer that it stays in English, for now at least. I just like to have French as a switchable standby for providing/receiving support, and/or for possible additional system users. So thinking it must be that yast2-trans-fr package I added which is responsible, I remove it again. When I start up YaST again, the menus are still in French, whereas the configuration options shown within each YaST category are in English for some and French for others. I've looked in the root home, in /etc and cannot find where this is configured. At the bottom of the file /etc/sysconfig/language, is a setting described as 'List of installed language supports, use by YaST2'. It is set as INSTALLED_LANGUAGES="en_GB" Everything else in the system is in English GB. Why is it overriding this in YaST, and where is this set? gumb -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 26

[opensuse] Clamav process is now even more memory hungry
by Carlos E. R. 03 Sep '19

03 Sep '19

Photo using top, sort by memory, this instant: > PID USER PR NI VIRT RES SHR SWAP S %CPU %MEM TIME+ COMMAND > 21395 cer 20 0 3402620 782716 85432 166280 S 69,35 9,591 61:58.83 Web Content > 1096 cer 20 0 3688736 767644 104104 0 S 2,976 9,406 19:05.04 thunderbird-bin > 3938 vscan 20 0 999648 725460 2628 17856 S 0,000 8,889 8:09.22 clamd .................................******* 0.7 GB of RAM! I will have to uninstall it. Las time I looked, it was half a gigabyte. And it is set with swapiness of 100... -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

2 29

[opensuse] why is my USB external disk disconnecting?
by Daniel Bauer 03 Sep '19

03 Sep '19

Hello, I use several encrypted USB disks for backups with rsync, some 3.5" with own power, some 2.5" only USB. Since 15.1 with /all/ of those disks I see longer "pauses" during rsync. I typed "dmesg" during the last rsync (to a 2.5") and got the following: > [442504.857344] sd 20:0:0:0: [sde] Attached SCSI disk > [442515.720544] device-mapper: table: 254:7: adding target device sde caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920 > [442515.720547] device-mapper: table: 254:7: adding target device sde caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920 > [442515.720594] device-mapper: table: 254:7: adding target device sde caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920 > [442515.720596] device-mapper: table: 254:7: adding target device sde caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920 > [442516.010328] REISERFS (device dm-7): found reiserfs format "3.6" with standard journal > [442516.010386] REISERFS (device dm-7): using ordered data mode > [442516.010386] reiserfs: using flush barriers > [442516.020114] REISERFS (device dm-7): journal params: device dm-7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 > [442516.020385] REISERFS (device dm-7): checking transaction log (dm-7) > [442516.117122] REISERFS (device dm-7): Using r5 hash to sort names > [442636.173855] sd 20:0:0:0: [sde] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT > [442636.173861] sd 20:0:0:0: [sde] tag#2 CDB: Write(10) 2a 00 4c 15 73 97 00 04 00 00 > [442636.174105] sd 20:0:0:0: [sde] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT > [442636.174109] sd 20:0:0:0: [sde] tag#1 CDB: Write(10) 2a 00 4c 15 6f 97 00 04 00 00 > [442636.175459] sd 20:0:0:0: [sde] tag#0 uas_eh_abort_handler 0 uas-tag 14 inflight: CMD OUT > [442636.175463] sd 20:0:0:0: [sde] tag#0 CDB: Write(10) 2a 00 4c 15 6b 97 00 04 00 00 > [442636.177455] sd 20:0:0:0: [sde] tag#27 uas_eh_abort_handler 0 uas-tag 28 inflight: CMD IN > [442636.177459] sd 20:0:0:0: [sde] tag#27 CDB: Read(10) 28 00 70 c4 ff ff 00 00 08 00 > [442636.177706] sd 20:0:0:0: [sde] tag#22 uas_eh_abort_handler 0 uas-tag 23 inflight: CMD OUT > [442636.177709] sd 20:0:0:0: [sde] tag#22 CDB: Write(10) 2a 00 4c 15 67 97 00 04 00 00 > [442636.177960] sd 20:0:0:0: [sde] tag#13 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUT > [442636.177963] sd 20:0:0:0: [sde] tag#13 CDB: Write(10) 2a 00 4c 15 63 97 00 04 00 00 > [442636.179413] sd 20:0:0:0: [sde] tag#12 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT > [442636.179417] sd 20:0:0:0: [sde] tag#12 CDB: Write(10) 2a 00 4c 15 5f 97 00 04 00 00 > [442636.181413] sd 20:0:0:0: [sde] tag#19 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT > [442636.181417] sd 20:0:0:0: [sde] tag#19 CDB: Write(10) 2a 00 4c 15 5b 97 00 04 00 00 > [442636.183417] sd 20:0:0:0: [sde] tag#14 uas_eh_abort_handler 0 uas-tag 15 inflight: CMD OUT > [442636.183421] sd 20:0:0:0: [sde] tag#14 CDB: Write(10) 2a 00 4c 15 57 97 00 04 00 00 > [442636.185414] sd 20:0:0:0: [sde] tag#11 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT > [442636.185417] sd 20:0:0:0: [sde] tag#11 CDB: Write(10) 2a 00 4c 15 53 ff 00 03 98 00 > [442636.187432] sd 20:0:0:0: [sde] tag#10 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT > [442636.187435] sd 20:0:0:0: [sde] tag#10 CDB: Write(10) 2a 00 4c 15 4f ff 00 04 00 00 > [442636.189431] sd 20:0:0:0: [sde] tag#25 uas_eh_abort_handler 0 uas-tag 26 inflight: CMD OUT > [442636.189435] sd 20:0:0:0: [sde] tag#25 CDB: Write(10) 2a 00 4c 15 4b ff 00 04 00 00 > [442636.191456] sd 20:0:0:0: [sde] tag#9 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT > [442636.191460] sd 20:0:0:0: [sde] tag#9 CDB: Write(10) 2a 00 4c 15 47 ff 00 04 00 00 > [442636.193425] sd 20:0:0:0: [sde] tag#23 uas_eh_abort_handler 0 uas-tag 24 inflight: CMD OUT > [442636.193429] sd 20:0:0:0: [sde] tag#23 CDB: Write(10) 2a 00 4c 15 43 ff 00 04 00 00 > [442636.195488] sd 20:0:0:0: [sde] tag#8 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT > [442636.195492] sd 20:0:0:0: [sde] tag#8 CDB: Write(10) 2a 00 4c 15 3f ff 00 04 00 00 > [442636.197426] sd 20:0:0:0: [sde] tag#7 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT > [442636.197430] sd 20:0:0:0: [sde] tag#7 CDB: Write(10) 2a 00 45 02 08 2f 00 00 b8 00 > [442636.199450] sd 20:0:0:0: [sde] tag#20 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT > [442636.199454] sd 20:0:0:0: [sde] tag#20 CDB: Write(10) 2a 00 45 02 04 2f 00 04 00 00 > [442636.201429] sd 20:0:0:0: [sde] tag#15 uas_eh_abort_handler 0 uas-tag 16 inflight: CMD OUT > [442636.201432] sd 20:0:0:0: [sde] tag#15 CDB: Write(10) 2a 00 45 02 00 47 00 03 e0 00 > [442636.203481] sd 20:0:0:0: [sde] tag#6 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT > [442636.203485] sd 20:0:0:0: [sde] tag#6 CDB: Write(10) 2a 00 45 01 fc 47 00 04 00 00 > [442636.237936] scsi host20: uas_eh_device_reset_handler start > [442636.403099] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd > [442636.428555] scsi host20: uas_eh_device_reset_handler success > [442677.133816] sd 20:0:0:0: [sde] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT > [442677.133821] sd 20:0:0:0: [sde] tag#9 CDB: Write(10) 2a 00 71 cc e9 5f 00 04 00 00 > [442677.134077] sd 20:0:0:0: [sde] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT > [442677.134082] sd 20:0:0:0: [sde] tag#8 CDB: Write(10) 2a 00 71 cc e5 5f 00 04 00 00 > [442677.135280] sd 20:0:0:0: [sde] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT > [442677.135285] sd 20:0:0:0: [sde] tag#7 CDB: Write(10) 2a 00 71 cc e1 5f 00 04 00 00 > [442677.137272] sd 20:0:0:0: [sde] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT > [442677.137276] sd 20:0:0:0: [sde] tag#6 CDB: Write(10) 2a 00 71 cc dd 5f 00 04 00 00 > [442677.139288] sd 20:0:0:0: [sde] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT > [442677.139290] sd 20:0:0:0: [sde] tag#5 CDB: Write(10) 2a 00 71 cc d9 5f 00 04 00 00 > [442677.157853] scsi host20: uas_eh_device_reset_handler start > [442677.294928] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd > [442677.320143] scsi host20: uas_eh_device_reset_handler success > [442720.141648] sd 20:0:0:0: [sde] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT > [442720.141652] sd 20:0:0:0: [sde] tag#4 CDB: Write(10) 2a 00 77 04 d0 37 00 04 00 00 > [442720.141852] sd 20:0:0:0: [sde] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT > [442720.141854] sd 20:0:0:0: [sde] tag#3 CDB: Write(10) 2a 00 77 04 cc 37 00 04 00 00 > [442720.157677] scsi host20: uas_eh_device_reset_handler start > [442720.286882] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd > [442720.312214] scsi host20: uas_eh_device_reset_handler success > [442752.909656] sd 20:0:0:0: [sde] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT > [442752.909661] sd 20:0:0:0: [sde] tag#2 CDB: Write(10) 2a 00 77 e0 d5 07 00 04 00 00 > [442752.909863] sd 20:0:0:0: [sde] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT > [442752.909866] sd 20:0:0:0: [sde] tag#1 CDB: Write(10) 2a 00 77 e0 d1 07 00 04 00 00 > [442752.925674] scsi host20: uas_eh_device_reset_handler start > [442753.054945] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd > [442753.079907] scsi host20: uas_eh_device_reset_handler success > [442918.797378] sd 20:0:0:0: [sde] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT > [442918.797384] sd 20:0:0:0: [sde] tag#6 CDB: Write(10) 2a 00 1d a8 ff ff 00 00 08 00 > [442918.813354] scsi host20: uas_eh_device_reset_handler start > [442918.942568] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd > [442918.967540] scsi host20: uas_eh_device_reset_handler success why is this happening? All always went normal and fast with 42.3 and the same disks.... What can I do? -- Daniel Bauer photographer Basel Málaga https://www.patreon.com/danielbauer https://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] delay on boot
by jdd＠dodin.org 03 Sep '19

03 Sep '19

Hello, I'm still on research to understand why I have a 10/20s delay at the end of the kde plasma load. At some time I suspected IPV6, but finally no, it's not. then I find in the boot messages some about a large usb disk (5Tb, archives) that is connected but do not have to be mounted at boot (do not live in fstab), because it's known to be extremely so when mounting. so, why is there this dmesg entry? May be it was mounted when I switched off the computer? thanks jdd dmesg: [ 36.177914] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 38.276709] Bluetooth: RFCOMM ver 1.11 [ 115.782681] sd 5:0:0:0: [sdc] Synchronizing SCSI cache [ 116.021030] sd 5:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 116.106323] usb 2-2.2: USB disconnect, device number 3 journalctl -b0: sept. 01 07:54:22 linux-tivq udisksd[2328]: Unmounted /dev/sdc1 on behalf of uid 1000 sept. 01 07:54:23 linux-tivq kernel: sd 5:0:0:0: [sdc] Synchronizing SCSI cache sept. 01 07:54:24 linux-tivq udisksd[2328]: Powered off /dev/sdc - successfully wrote to sysfs path /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/r> -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 11

[opensuse] test large mail, req fm opensuse+owner
by Patrick Shanahan 03 Sep '19

03 Sep '19

large image -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode

5 7

[opensuse] Why does OpenSUSE Tumbleweed change XFCE?
by Markus Egg 02 Sep '19

02 Sep '19

Hello, I am running SuSE Tumbleweed on a desktop and on an older laptop (for test purposes). On both machines after the last zypper ref/dup/up cycle the complete XFCE desktop was changed, many of the settings were lost and the way how one can change e.g. the desktop background was changed in a way that it is more inconvenient. I do know that XFCE per se did not change, because on another Laptop with Ubuntu 18.04 the XFCE desktop and settings were the same after the last updates. So as an example: the conventient way to set XFCE background on Ubuntu was and is like shown in ConvenientDesktopSet.jpg The new way from SuSE Tumbleweed (last zypper ref/dup/up cycle yesterday, uname says "...5.2.10-1-default #1 SMP Sun Aug 25 17:33:34 UTC 2019..." ) is seen in warumallesandersSuSETumble_1.jpg warumallesandersSuSETumble_2.jpg : now you need 2 sub-windows for e.g. setting the background colors and you cannot set colors with decimal numbers for RGB or HSV, you have to do it in hex. :-/ I was moving to XFCE since KDE changed the way of virtual workspaces in an unusable manner, and now someone is starting to mess up XFCE. <rant on> Where did the message of "never change a runnning machine" go? <rant off> :-( And if it needs a change: Why not putting the "predefined color section" into the color selection window of ConvenientDesktopSet.jpg ? BR

7 15

[opensuse] trying to get scanner to work
by Doug McGarrett 02 Sep '19

02 Sep '19

(part of thread) On 08/29/2019 01:26 AM, Basil Chupin wrote:> On 28/8/19 3:13 pm, Doug McGarrett wrote: >> >> >> On 08/28/2019 12:10 AM, Basil Chupin wrote: >>> On 28/8/19 9:05 am, Doug McGarrett wrote: >>>> >>>> >>>> On 08/27/2019 05:02 PM, Carlos E. R. wrote: >>>>> On 27/08/2019 22.56, Doug McGarrett wrote: >>>>>> Went to Epson site and looked up this scanner and Linux. It says, >>>>>> and I >>>>>> quote: >>>>>> >>>>>> >>>>>> >>>>>> "On Linux, you need to set up libusb device protections. <<<-- >>>>>> " >>>>>> >>>>>> I don't know what this means, or how to do it. Please advise! >>>>> >>>>> Me neither. >>>>> >>>>> What model? >>>>> >>>> WP4530 All-in-One printer scanner fax >>>> >>>> --doug >>>> >>> >>> Go here- >>> >>> https://askubuntu.com/questions/591888/drivers-for-my-epson-wp-4530 >>> >>> and I think your problem is solved. >>> >>> >>> (There's that 'ubuntu' word again...) >>> >>> >>> BC >>> >>> >> I have that file installed already. But thanx. --doug > > > You have that driver already installed but you still cannot print? The > driver specifically states that it works with the WP4530. > > Just out of curiosity, did you install the 32-bit or the 64-bit version > of the driver? > > Oh, and how did you install the *.RPM? > > I don't remember for sure, but I usually install an rpm by apt-get install filename.rpm (all on one line) I would certainly have installed the 64 bit version. later, from another post, which I can't locate, I was told to get this: imagescan-bundle-opensuse-15.1-3.59.2.x64.rpm.tar.gz so I did tar -xzvf imagescan-bundle-opensuse-15.1-3.59.2.x64.rpm.tar.gz and got an rpm file, as expected, but it has trouble installing: [CODE] apt-get install imagescan-3.59.2-1epson4opensuse15.1.x86_64.rpm Specified local path does not exist or is not accessible. Problem retrieving the specified RPM file: Malformed URI: Please check whether the file is accessible. Problem with the RPM file specified as 'imagescan-3.59.2-1epson4opensuse15.1.x86_64.rpm', skipping. No valid arguments specified.[/CODE] --doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 43

[opensuse] Help needed configuring firewalld
by Marc Chamberlin 01 Sep '19

01 Sep '19

I need some help/guidance with firewalld and I can't seem to get an account set up on the Fedora site where it appears that the main newsgroup for supporting firewalld is being hosted. (at least according to my Google research) I am getting requests from small businesses, homeowners, and me myself and I to find a solution for handling modern day internet of things "IOT" (devices that connect to the internet) thingies that range from security cameras to robot vacuum cleaners to fit bit wrist monitors etc... To handle all these wonderful thingy dingys I thought the best approach would be to relegate them to their own subnet and manage them at a firewall. That way I thought I could monitor and if necessary keep ET from phoning home and sending data to parties unknown (i.e security cameras with firmware made in China for example, and yeah call me paranoid if it helps). AND I can keep these thingies from bogging down my other networks of computers doing "real" work and keeping them secured from these widgets as well. Towards this goal I am setting up a second wireless/wired network to be used by these devices and connecting it to a second NIC interface on one of my computers. I then created a firewalld "zone" for that interface. And yeah I will also set up a dhcpd (and assign static IP addresses based on MAC addresses) and even a DNS server for these thingies to use, if necessary. Before I ask how to do what I want with firewalld, perhaps I should express what I think the firewalld model of an interface is, because I have found a lot of inconsistencies in articles on the internet that try to explain things. I think when talking about incoming or outgoing connections I will use the host computer that firewalld is running on as the reference point (and not the network in which the host and it's interface is part of). So incoming means packets coming in to the host, through an interface, from some external network. Outgoing means packets that are passing through an interface, from the host to some other computer on an external network. Please excuse my wordiness but I need to make an effort to be sure I am communicating clearly. What I first want to be able to do is to be able to execute a command that blocks all incoming traffic originating from devices within this second network zone, regardless of whether those messages are trying to connect to some service on firewalld's host itself or whether those messages want to be passed on by the host to some other server on some other network. I also want to block all outgoing traffic going to devices on this second network. While in this state I want to be able to monitor/log any attempts, and traffic content, by devices on this network to initiate communication, so I can determine who/what is trying to "phone home" and where it is trying to reach. I don't expect firewalld to have such a builtin command, I expect to have to write a script, but I need to know how to put firewalld in such a state for a particular interface. Next I want to be able to configure firewalld so that it allows incoming requests from hosts on this second network, and to allow connections to services running on firewalld's host as well as allowing those connection requests to be passed on to external networks. But I still want to block all outgoing traffic through this second interface, that may be returning to devices on this secondary network. And I still want to be able to log/monitor/examine this outgoing traffic before relaxing any firewall rules to allow those outgoing connections through the interface. Again I want to be able to create a script to put the firewall in that state. Next I want to be able to configure firewalld to block all incoming and outgoing traffic to/from this secondary net unless the traffic was initiated/established by a service/process running on the host that firewalld is running on. In other words. I don't want to allow any traffic from any network to be passed through the interface to this secondary network, unless that traffic originated on the localhost itself that the firewalld daemon is running on. Perhaps being able to add/allow specific hosts would also be helpful as not all services are necessarily provided on the local firewalld host that I want to monitor. Conceptually it seems like a firewall should have the capability to effectively turn an interface completely off, disallowing ALL incoming and/or outgoing traffic through an interface regardless of whether it is intended for some service on the host itself or for some other host on some other network, while at the same time logging or allowing an administrator to monitor what is happening at that interface. I can't seem to get a straight answer on how to get firewalld to do these things so I suspect it may not be possible or perhaps not intended. It is certainly possible to use firewalld to control incoming connections to services that are running on the host itself, and it is possible to control/route specific types of incoming connections to specific other hosts/nets. So it appears that firewalld is more oriented towards regulating incoming connection requests, to the host (and network(s)) firewalld is running on/has direct control over, and could care less about traffic that wants to pass through the host and become an outgoing connection via some other interface. I suspect that firewalld, by default, just passes those requests on to whatever gateway IP address or routing rules, via some interface, that is defined by it's host system network configuration tools. At least I should say I have not been able to figure out how to make firewalld care about all these other connections from the man pages for firewall-cmd. I suspect I am going to have to create some "rich rules" or "direct rules" for firewalld that augment iptables but I don't have much experience or understanding of iptables though like most software engineers I can learn (or ask for help from some kind guru). Seems like this should be easy/intuitive so perhaps I am overlooking the obvious? My goal is to be able to establish better control over some of these insecure devices and to insert my own tools to interface with these devices, for example an Apache web server that will want to make a connection to security cameras on this subnet (tex zoneminder is a good example of where I am headed here) to serve out an image stream after proper authorization. I might want to open a particular port to a particular IP address at a particular time using cron, add filters to prevent things like traceroute being executed by some IOT thingy (yep I saw that happen!) or use something like a port knocker to open ports at will if/when I want to access one of these IOT thingies from the internet... If for another example I see something like a security camera trying to send large amounts of data to some unexpected location I definitely want to put a stop to it fast! I am aware of the fact that some of this may provoke a discussion about controversial topics, and a one size solution is not going to be the answer to everything. A Fitbit should be able to contact it's cloud from home, but a business may want to ban it... yada yada yada... So please I am not looking to start such discussions. Since I am running most of my systems under OpenSuSE (most are 15.0, but some are 42.3 and even one business is running 42 .1) I thought I would throw my question out here while trying to get an account on Fedora so I can ask questions on their firewalld support group. Any SuSE firewalld gurus here or anyone who has traveled down this path? Would love to hear suggestions, insights, or comments cuz right now I seem to be stuck... Thanks in advance... Marc.. (P.S. I will say that the one thing that the man pages for firewall-cmd makes crystal clear REPEATEDLY is that if you don't specify a zone for a firewall-cmd command that "If the zone is omitted the default zone will be used."!! You got NO excuse if you should ever forget that little bit of a trinket! LOL) -- --... ...-- .----. ... -.. . .-- .- --... .--. -..- .-- -- .- .-. -.-. Computers: the final frontier. These are the voyages of the user Marc. His mission: to explore strange new hardware. To seek out new software and new applications. To boldly go where no Marc has gone before! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 8

[opensuse] Unencrypted File Transfers: Howto?
by Lew Wolfgang 31 Aug '19

31 Aug '19

Hi Folks, We've been using rsh, and rsync calling rsh, to transfer large files over local network links to avoid the encrypt/decrypt overhead. I know about the security concerns, but these transfers are completely local on isolated networks. In preparation for deploying a 40GbE link I noticed that rsh isn't supported on Leap 15 and up. There's a replacement called mrsh that uses something called munge for authentication. Bummer. I'd rather not have to figure this all out when authentication isn't needed in the first place. So, what are the options for sending many large files between machines without encryption? SSH insists on encryption, but there are apparently patches that will allow it to be turned off. Maybe wrap netcat up with some scripts? Maybe rsync could be persuaded to use netcat? Byte the bullet and learn munge? Any other options? Regards, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 49

[opensuse] LibreOffice : Spreadsheet : red cell boundaries : shows Date cell content changed
by ellanios82 31 Aug '19

31 Aug '19

- today, am confronted by new un-wanted 'Improvement' : spreadsheet shows red cell boundaries & shows Date cell content changed .... any suggestions how to get back to without "red cell boundaries & shows Date cell content changed" ?? [ have looked at Cell-format , but unable see how to fix] thanks ..... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] File Systems
by Wolfgang Mueller 31 Aug '19

31 Aug '19

I am going to install 42.3 on a computer whose hard disk I want to erase completely to change partitioning. This gives me the chance to choose the file system. So far, I used ext4 only. But recently I read more about XFS and btrfs. But I know too little about them. Are they better than ext4? Or worse? Can you tell me something about their advantages and possible defects? Are there bugs? Best regards, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

14 32

[opensuse] leap 15.1 how to stop/restart network service?
by Istvan Gabor 30 Aug '19

30 Aug '19

Hello: In openSUSE Leap 15.1 I configured network service using network manager (not wicked). It seems when I stop network service, the network is not disabled. See: When the network is on: # systemctl status network ● NetworkManager.service - Network Manager Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled; vendor preset: disabled) Drop-In: /usr/lib/systemd/system/NetworkManager.service.d └─NetworkManager-ovs.conf Active: active (running) since Tue 2019-08-27 01:05:10 CEST; 7min ago Docs: man:NetworkManager(8) Main PID: 2674 (NetworkManager) Tasks: 4 (limit: 4915) CGroup: /system.slice/NetworkManager.service ├─2674 /usr/sbin/NetworkManager --no-daemon └─2699 /sbin/dhclient -d -q -sf /usr/lib/nm-dhcp-helper -pf /var/run/dhclient-eth1.pid -lf /var/lib/Netwo> Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.2812] policy: set 'Wired connection 2' (eth1) a> Aug 27 01:05:10 linux-14wp NetworkManager[2674]: nisdomainname: you must be root to change the domain name Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.4240] device (eth1): Activation: successful, de> Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.4246] manager: startup complete Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.8252] dhcp6 (eth1): nameserver 'fe80::1' Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.8252] dhcp6 (eth1): state changed unknown -> bo> Aug 27 01:05:10 linux-14wp NetworkManager[2674]: nisdomainname: you must be root to change the domain name Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.9718] dhcp6 (eth1): client pid 2705 exited with> Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.9718] dhcp6 (eth1): state changed bound -> done Aug 27 01:05:11 linux-14wp NetworkManager[2674]: <info> [1566860711.5176] manager: NetworkManager state is now CONN> # ping opensuse.org PING opensuse.org(opensuse.org (2620:113:80c0:8::19)) 56 data bytes 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=1 ttl=54 time=52.1 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=2 ttl=54 time=52.2 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=3 ttl=54 time=51.9 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=4 ttl=54 time=51.6 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=5 ttl=54 time=51.9 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=6 ttl=54 time=51.8 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=7 ttl=54 time=51.7 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=8 ttl=54 time=52.2 ms ^C --- opensuse.org ping statistics --- 8 packets transmitted, 8 received, 0% packet loss, time 7011ms rtt min/avg/max/mdev = 51.699/51.987/52.256/0.254 ms Then I (suppose) disable the network: # systemctl stop network # systemctl status network ● NetworkManager.service - Network Manager Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled; vendor preset: disabled) Drop-In: /usr/lib/systemd/system/NetworkManager.service.d └─NetworkManager-ovs.conf Active: inactive (dead) since Tue 2019-08-27 01:15:17 CEST; 4s ago Docs: man:NetworkManager(8) Process: 2674 ExecStart=/usr/sbin/NetworkManager --no-daemon (code=exited, status=0/SUCCESS) Main PID: 2674 (code=exited, status=0/SUCCESS) Tasks: 1 (limit: 4915) CGroup: /system.slice/NetworkManager.service └─2699 /sbin/dhclient -d -q -sf /usr/lib/nm-dhcp-helper -pf /var/run/dhclient-eth1.pid -lf /var/lib/Netwo> Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.8252] dhcp6 (eth1): state changed unknown -> bo> Aug 27 01:05:10 linux-14wp NetworkManager[2674]: nisdomainname: you must be root to change the domain name Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.9718] dhcp6 (eth1): client pid 2705 exited with> Aug 27 01:05:10 linux-14wp NetworkManager[2674]: <info> [1566860710.9718] dhcp6 (eth1): state changed bound -> done Aug 27 01:05:11 linux-14wp NetworkManager[2674]: <info> [1566860711.5176] manager: NetworkManager state is now CONN> Aug 27 01:15:17 linux-14wp systemd[1]: Stopping Network Manager... Aug 27 01:15:17 linux-14wp NetworkManager[2674]: <info> [1566861317.6149] caught SIGTERM, shutting down normally. Aug 27 01:15:17 linux-14wp NetworkManager[2674]: <info> [1566861317.6156] manager: NetworkManager state is now CONN> Aug 27 01:15:17 linux-14wp NetworkManager[2674]: <info> [1566861317.6362] exiting (success) Aug 27 01:15:17 linux-14wp systemd[1]: Stopped Network Manager. nm-applet also indicates that the network is off (small red x in the applet icon). Still I can ping sites and can browse the internet: # ping opensuse.org PING opensuse.org(opensuse.org (2620:113:80c0:8::19)) 56 data bytes 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=1 ttl=54 time=52.2 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=2 ttl=54 time=52.3 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=3 ttl=54 time=52.3 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=4 ttl=54 time=52.0 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=5 ttl=54 time=51.9 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=6 ttl=54 time=52.1 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=7 ttl=54 time=51.7 ms 64 bytes from opensuse.org (2620:113:80c0:8::19): icmp_seq=8 ttl=54 time=52.4 ms ^C --- opensuse.org ping statistics --- 8 packets transmitted, 8 received, 0% packet loss, time 7009ms rtt min/avg/max/mdev = 51.754/52.161/52.463/0.361 ms What do I do wrong? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] exFAT specs published!
by Carlos E. R. 30 Aug '19

30 Aug '19

It seems that M$ has just published the exFAT specs, explicitly so that Linux adds full and legal support for it :-) <https://www.theinquirer.net/inquirer/news/3080947/microsoft-exfat-open-sour…> Comments on the offtopic list, perhaps, please :-) -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

4 5

[opensuse] trying to get scanner to work
by Doug McGarrett 30 Aug '19

30 Aug '19

Went to Epson site and looked up this scanner and Linux. It says, and I quote: "On Linux, you need to set up libusb device protections. " I don't know what this means, or how to do it. Please advise! Thanx, Doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 11

[opensuse] XMP/IPTC in Linux? (Photo)
by Carlos E. R. 30 Aug '19

30 Aug '19

Hi, I did a little test in Windows with some photos. Using the Nikon supplied tools (ViewNX-i/Capture NX) I wrote the "XMP/IPTC" copyright profile on a few photos. But on Linux there was no trace at all of this. [...] Forget it. Before posting this I took a second look on the photos on Windows, and whatever that is was not actually written: loading the photos again the info is not there, even though it asked me to "save" :-( -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

2 1

[opensuse] KDE: Different widgets for each desktop?
by Wolfgang Mueller 30 Aug '19

30 Aug '19

On Sun, 18 Aug 2019 at 18:52:46 +0200, I wrote to the KDE mailing list <kde-linux(a)kde.org>: > > In the old Version 4.14.9 under SuSE 13.2, the System Settings > granted the possibility to set "Different widgets for each desktop". > > Now, in the new Version 5.12.18 under Leap 15.1, I cannot detect > this useful setting. Where has it been hidden? Or does it not > exist any more? But I did not get an answer because the KDE mailing list is dead, and I seem to be the only surviving participant. So, it would be helpful if there were somebody among the users of <opensuse(a)opensuse.org> that could give me an answer. Thanks in advance, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Introduction + system boot failure after LDAPS configuration
by Nicolas Kovacs 29 Aug '19

29 Aug '19

Hi, Since this is my first message on this list, let me introduce myself. I'm a 52 year old Austrian living in Montpezat, a small village in South France. And I'm the manager of a small IT business with a focus on Linux and Open Source software. I'm running CentOS 7.6 on all my servers and OpenSUSE Leap 15.1 KDE on all my desktop clients. I'm currently fiddling with 389 Directory Server, the Open Source variant of Red Hat Directory Server. I've installed and configured it on a sandbox server running CentOS. Now I'd like my OpenSUSE Leap clients to get their authentication information from this machine. Here's what I do on a fresh install, vanilla OpenSUSE without any tweaks. Import CA certificate: # cp ca.crt /etc/pki/trust/anchors/ # update-ca-certificates --------------------------------------------------------------------- YaST > Network Services > LDAP and Kerberos Client > Change Settings: [X] Allow LDAP Users To Authenticate (pam_ldap) [X] Cache LDAP Entries For Faster Rsponse (nscd) [X] Automatically Create Home Directory Read the following items from LDAP data source: [X] Users [X] Groups [ ] Super-User Commands (sudo) [ ] Network Disk Locations (automount) Enter LDAP server locations: ldaps://amandine.microlinux.lan:636 DN of Search Base: dc=microlinux,dc=lan DN of Bind User : <empty> Password of the Bind User : <empty> [ ] Identify Group Members by Their DNs [X] Leave LDAP Connections Open for Consecutive Requests Secure LDAP communication: [X] Secure Communication via TLS --------------------------------------------------------------------- At this point, when I click on "Test Connection" in YaST's LDAP configuration module, I get this: "Successfully contacted LDAP server on URI ldaps://amandine.microlinux.lan:636!" I configure everything by clicking OK > OK and the proceed to a reboot. And then the next reboot is a total failure with errors everywhere pretty early in the process. After D-Bus starts, pretty much every service fails to start. NSCD fails, Modem Manager fails, etc. and I never get to see a login. And now I'm clueless. Any suggestions ? Cheers from the sunny South of France, Niki Kovacs -- Microlinux - Solutions informatiques durables 7, place de l'église - 30730 Montpezat Site : https://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32 Mob. : 06 51 80 12 12 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 8

[opensuse] x86_64 to MIPS cross-compilation struggles
by Oleksii Vilchanskyi 28 Aug '19

28 Aug '19

Hello community, I am unable to cross-compile to MIPS via 'cross-mips-gcc9-9.1.1+r274111-1.1.x86_64' package from official repositories. Consider this example: > > % cat main.cc > #include <cstdlib> > #include <iostream> > > int main(int argc, char** argv) { > std::cout << argv[0] << ": hello world\n"; > return EXIT_SUCCESS; > } Compilation attempts: > % mips-suse-linux-g++ main.cc -o hello-world > In file included from main.cc:1: > /usr/include/c++/9/cstdlib:41:10: fatal error: bits/c++config.h: No such file or directory > 41 | #include <bits/c++config.h> > | ^~~~~~~~~~~~~~~~~~ > compilation terminated. > % mips-suse-linux-g++ -I/usr/lib64/gcc/mips-suse-linux/9/include main.cc -o hello-world > In file included from main.cc:1: > /usr/include/c++/9/cstdlib:41:10: fatal error: bits/c++config.h: No such file or directory > 41 | #include <bits/c++config.h> > | ^~~~~~~~~~~~~~~~~~ > compilation terminated. > % mips-suse-linux-g++ -nostdinc -I/usr/lib64/gcc/mips-suse-linux/9/include main.cc -o hello-world > main.cc:1:10: fatal error: cstdlib: No such file or directory > 1 | #include <cstdlib> > | ^~~~~~~~~ > compilation terminated. > % mips-suse-linux-g++ -nostdinc++ -I/usr/lib64/gcc/mips-suse-linux/9/include main.cc -o hello-world > main.cc:1:10: fatal error: cstdlib: No such file or directory > 1 | #include <cstdlib> > | ^~~~~~~~~ > compilation terminated. What am I doing wrong? -- Regards Oleksii Vilchanskyi -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] LibreOffice will not start after the update via zypper up -t patch
by Boyd Lynn Gerber 28 Aug '19

28 Aug '19

Hello, I'm getting the below removing the .config/libreoffice does not help. Any ideas. Been working without issues for a long time before this update. libreoffice Fatal exception: Signal 11 Stack: /usr/lib64/libreoffice/program/libuno_sal.so.3(+0x11849)[0x7f5980ce7849] /usr/lib64/libreoffice/program/libuno_sal.so.3(+0x22ba5)[0x7f5980cf8ba5] /lib64/libc.so.6(+0x361e0)[0x7f597d0af1e0] /usr/lib64/libreoffice/program/libuno_cppu.so.3(+0x12922)[0x7f5980c28922] /usr/lib64/libreoffice/program/libuno_cppu.so.3(+0x12fcc)[0x7f5980c28fcc] /usr/lib64/libreoffice/program/libmergedlo.so(+0x27a8af5)[0x7f597fbdbaf5] /usr/lib64/libreoffice/program/libmergedlo.so(+0x27a8efc)[0x7f597fbdbefc] /usr/lib64/libreoffice/program/libmergedlo.so(_ZN3utl10ConfigItemC2ERKN3rtl8OUStringE14ConfigItemMode+0xda)[0x7f597fbdc13a] /usr/lib64/libreoffice/program/libmergedlo.so(_ZN19SvtSysLocaleOptionsC1Ev+0x17d)[0x7f597fc093ed] /usr/lib64/libreoffice/program/libmergedlo.so(_Z7InitVCLv+0x211)[0x7f597fac99c1] /usr/lib64/libreoffice/program/libmergedlo.so(_Z10ImplSVMainv+0x255)[0x7f597fb27295] /usr/lib64/libreoffice/program/libmergedlo.so(soffice_main+0x625)[0x7f597ea61b55] /usr/lib64/libreoffice/program/soffice.bin(+0x77b)[0x556ec22e477b] /lib64/libc.so.6(__libc_start_main+0xea)[0x7f597d099f8a] /usr/lib64/libreoffice/program/soffice.bin(+0x7ba)[0x556ec22e47ba] Thanks, -- Boyd Gerber <gerberb(a)zenez.com> 801 849-0213 ZENEZ 1042 East Fort Union #135, Midvale Utah 84047 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] why doesn't thunderbird show attached .vcf file?
by Daniel Bauer 27 Aug '19

27 Aug '19

Hi, Because I was too lazy to enable an ssh session to my mobile phone I just sent the .vcf backup file from my mobile per email. But thunderbird doesn't show the attachement. It shows just the email and no hint nowhere that there is an attachment. But when looking at the source of the email it is there: ---- User-Agent: K-9 Mail for Android MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----GANDZVJ04IYVOJZQO0M5J1R86QKS9R" Content-Transfer-Encoding: 7bit Subject: vcf To: Daniel Bauer ...com From: Daniel Bauer ...ch Message-ID: <E...@..ch> ------GANDZVJ04IYVOJZQO0M5J1R86QKS9R Content-Type: multipart/alternative; boundary="----TUF0ZBU2ZS5FHN00LC1QBVD9HEDRPI" Content-Transfer-Encoding: 7bit ------TUF0ZBU2ZS5FHN00LC1QBVD9HEDRPI Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable --=20 Sent from my Android device with K-9 Mail=2E Please excuse my brevity=2E ------TUF0ZBU2ZS5FHN00LC1QBVD9HEDRPI Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable -- Sent from my Android device with K-9 Mail=2E Please excuse my br= evity=2E ------TUF0ZBU2ZS5FHN00LC1QBVD9HEDRPI-- ------GANDZVJ04IYVOJZQO0M5J1R86QKS9R Content-Type: text/x-vcard; name="Contacts.vcf" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="Contacts.vcf"; size=376688 QkVHSU46Vk....... ---- I then zipped the file on the mobile and sent it again. The zip-file was shown normally as an attachment. What went wrong when sending the simple vcf file? -- Daniel Bauer photographer Basel Málaga https://www.patreon.com/danielbauer https://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Cisco AnyConnect
by Roger Oberholtzer 27 Aug '19

27 Aug '19

Our company uses Cisco AnyConnect for VPN in to the company network. They use this on the official Windows computers. Our IT don't do Linux... Does anyone have any experience with AnyConnect on openSUSE? There are some downloads available here: https://software.cisco.com/download/home/286281283/type/282364313/release/4… I'm not sure which are appropriate. I am guessing that one needs a certificate of some sore to gain access. No idea. Early days. Any pointers or constructive comments are welcome! -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] color code list for YaST2 graphs?
by Ralph 27 Aug '19

27 Aug '19

Is there a list somewhere of all the possible color codings used in the YaST2 device graphs in YaST2 Partitioner (in Leap 15.1)? Thanks. Ralph -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] leap 15.1 yast proxy problem
by Istvan Gabor 26 Aug '19

26 Aug '19

Hello: I have this problem in openSUSE Leap 15.1, fresh install from DVD: I installed the system on a computer behind a proxy server. I configured the proxy in yast network services/proxy. Everything worked fine. Then I moved the hard drive into a different computer without a proxy server. I have configured another network connection in network manager for the different network card. The network works fine, but: yast online update and software manager gives the following error: Download (curl) error for 'http://ftp5.gwdg.de/pub/opensuse/distribution/leap/15.1/repo/.....: Error code: Connection failed Error message: Could not resolve proxy: xxxxxx The following actions did not solve the problem: - disabled and also deleted proxy information in yast network services/proxy, - restarting network. Only yast has this proxy problem, I can use the network as normal user and root (pinging sites, using firefox browser). Any help would be appreciated. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Can't play video files
by Frans de Boer 26 Aug '19

26 Aug '19

LS, I tried to playback some video files with the MP4 or DV extension, without suc6. I used MVP, Xine, DragonPlayer and VLC but only VLC let me hear some audio but, like all others, no video. Just to test, KDENLIVE did work, but of course is not intended as a player. Some complained that there was no DV codec present, so I installed libdv4 too - libdv was already present. Alas, this did not work too. I used most of the programs in the past, in one time or another, and all played well. Can anybody shed some light on what is going on here, or do I need to compile a video player myself? Regards, Frans. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] Little copy file problem
by Carlos E. R. 26 Aug '19

26 Aug '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I need to copy some files to an USB stick (FAT). The problem is, the files have a ":" on their names, and Thunar (XFCE) says the name is invalid, but does not offer as an option to change the name. So the question is: do you know a file browser that does offer to change the name, or even better, changes the name automatically? I try another file browser called "Files". It does change the ":" to "_", but it also changes the "ñ" to "_" which is not correct, as fat does accept the ñ, and it would be more correct to change to 'n'. There is "gnome-commander", which allows change the destination name if you try before pressing enter to go ahead. BUT, not if I select several files to copy. Midnight commander does not allow edit. Well, it does, in a cumbersome manner. Krusader can't. On multiple select it offers to skip. On single file it does not allow to edit name. It fails, and does not say the reason, just "can not copy", retry, cancel. PCManFM-Qt... simply crashes when asked to copy two such files! Tried twice. Others? Specially if you know they work, changing names for FAT media correctly. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXWKBIBwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVwcMAni75iQfPqCyhXEWuLq/y 8K/Gw2jSAJ9ckChp1751kkaUEFyNEY7gXJziiw== =T2PE -----END PGP SIGNATURE-----

12 42

[opensuse] Error with keys installing rpms
by Markus Egg 25 Aug '19

25 Aug '19

I want to install some rpms on a Tumbleweed system(DVD ISO July 6th, 2019). I get some error about keys: warning: aide-0.16.1-55.3.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ee3d166a: NOKEY When getting another package from here: https://software.opensuse.org/package/aide I get the same error: rpm --checksig -v aide-0.16.1-55.3.x86_64.rpm aide-0.16.1-55.3.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ee3d166a: NOKEY Header SHA256 digest: OK Header SHA1 digest: OK Payload SHA256 digest: OK V3 RSA/SHA256 Signature, key ID ee3d166a: NOKEY MD5 digest: OK rpm --checksig -v aide-0.16.1-2.1.x86_64.rpm aide-0.16.1-2.1.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 3dbdc284: NOKEY Header SHA256 digest: OK Header SHA1 digest: OK Payload SHA256 digest: OK V3 RSA/SHA256 Signature, key ID 3dbdc284: NOKEY MD5 digest: OK Are there keys missing when installing from a DVD with Tumbleweed? How and where do I get those keys? BR ME -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 13

[opensuse] TW : XFCE after latest zypper dup : X has frozen with blank black screen
by ellanios82 25 Aug '19

25 Aug '19

TW : XFCE after latest zypper dup : a couple of time this morning X has frozen with blank black screen - had to kill, & then re-start desktop .... regards -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Brother DCP-7010 as a scanner
by Wolfgang Mueller 23 Aug '19

23 Aug '19

So far, my DCP-7010, which is connected by USB, works as a printer only, but I should also like to set it up as a scanner. In my prehistoric SuSE 10.1, it still works, but under Leap 15.1 its installation is obviously a problem. yast2 does not recognize the scanner's driver even though it seems to be present on the computer as can be verified by "sane-find-scanner", which yields the reply: found USB scanner (vendor=0x04f9, product=0x0182) at libusb:003:002 Maybe zypper would be helpful to install it. But I am not familiar at all with zypper. Any help would be welcome. Thanks in advance, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Dolphin not displaying network places
by Jos van Kan 23 Aug '19

23 Aug '19

Probably after some update Dolphin no longer displays network places only local things. Possibly I fubarred my config but I can't find out how or why. On the upside: I rediscovered konquerer that does give all network places, browses the net and browses the locals. Now if only it also would make coffee... So basically the problem has been solved, but I'm still wondering. Leap 15.1, x_64. kde4 Regards, Jos -- Jos van Kan registered Linux user #152704 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 9

Re: [opensuse] openSUSE Router with IPV6
by James Knott 22 Aug '19

22 Aug '19

On 2019-08-20 01:05 PM, Carlos E. R. wrote: > Could it be that he will never get them, and has to use always private > addresses on the inside? Same as if he were using NAT. The ISP doesn't > want his internal machines to be directly adressable from outside. No, the problem is openSUSE does not appear to support DHCPv6-PD, which is needed to use it as a router with most ISPs. I have a block of 2^72 addresses from my ISP. Any I use within that range will be accessible from outside. There is another type of address, called Unique Local Addresses, which are not accessible from elsewhere, though they are routeable, just like RFC1918 addresses on IPv4. Also, NAT is a hack, to get around the IPv4 address shortage, so there's no need for it on IPv6. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 36

[opensuse] boot delay after changing swap partition
by gumb 22 Aug '19

22 Aug '19

On Leap 42.3 (shortly due to be updated to 15.1), in preparation I decided to change the partitioning. In view of my doubling the RAM, I created a new swap partition, /dev/sda2 on an nvme drive (I've set the swappiness=1 as it'll likely never be used, it's really just for very rare and unlikely hibernation as I have plenty of free space on this drive). After a reboot I then deleted the original swap partition on /dev/sdb2. I did all this in YaST Partitioner. Now each boot has a 1m30s delay. In boot.log there are hundreds of timed entries throughout this delay, i.e.: A start job is running for dev-sda2.device (1min 29s / 1min 30s) ending with Timed out waiting for device dev-sda2.device. Dependency failed for Resume from hibernation using device /dev/sda2. In /boot/grub2/grub.cfg I see each boot entry is appended with: resume=/dev/sda2 splash=silent quiet showopts resume=/dev/sda2 splash=silent quiet showopts resume=/dev/sda2 splash=silent quiet showopts So the string three times in succession. How can I fix this? I just want to be sure there's no broader issue with putting swap on an nvme drive before I do a fresh install of 15.1. gumb -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 6

[opensuse] Another annoying "feature" - 15.1 & KDE
by James Knott 22 Aug '19

22 Aug '19

There seems to be a bug with KDE on 15.1. Frequently, when I click on an open item on the task bar, the list of windows for that app no longer appears. However, if I just hover over it, then the windows are listed in a horizontal row. Is there anyway to fix this? At the moment, I have to log out & in. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] boot delay on 15.1
by jdd＠dodin.org 21 Aug '19

21 Aug '19

Hello, I have a long boot delay at the end of the boot procedure. dmesg say (see below). on this computer (laptop), I have both eth0 and wlan0, eth0 connected (to fiber device). AFAIK previous stop was clean idéa? thanks jdd [ 15.660665] r8169 0000:05:00.0 eth0: link up [ 16.661342] r8169 0000:05:00.0 eth0: link down [ 20.670199] r8169 0000:05:00.0 eth0: link up [ 21.673416] r8169 0000:05:00.0 eth0: link down [ 25.642446] r8169 0000:05:00.0 eth0: link up [ 26.643564] r8169 0000:05:00.0 eth0: link down [ 30.654543] r8169 0000:05:00.0 eth0: link up [ 31.655686] r8169 0000:05:00.0 eth0: link down [ 34.315896] r8169 0000:05:00.0 eth0: link up [ 352.328647] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 660.964992] BTRFS info (device sdb5): qgroup scan completed (inconsistency flag cleared) [ 667.339857] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 982.345635] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1297.341975] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1612.337921] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1859.748794] Bluetooth: RFCOMM TTY layer initialized [ 1859.748799] Bluetooth: RFCOMM socket layer initialized [ 1859.748803] Bluetooth: RFCOMM ver 1.11 [ 1894.576011] fuse init (API version 7.26) [ 1927.296063] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 9

[opensuse] Trying to activate an HE IPv6 tunnel.
by Carlos E. R. 20 Aug '19

20 Aug '19

Hi, Well, as suggested, I got an account on Hurricane Electric and I got the tunnel data. The next step is how to configure it on my router. I was reading some Spanish instructions from <https://www.redeszone.net/2019/05/05/tutorial-tunnelbroker-router-asus-ipv6/>, which are for an ASUS router. I don't find instructions for my specific router, a Comtrend VG-8050. Basically the instructions are: +++................... * Server IPv4 Address: we must indicate the IP address that appears in Tunnelbroker as "Server IPv4 Address". * Client IPv6 Address: we must indicate the IP address that appears in Tunnelbroker as "Client IPv6 Address", but without the /64 at the end. * IPv6 Prefix Length: we must indicate the /64 that we have in the final part of the IP address. Simply indicate the "64" without the bar. * Server IPv6 Address: we must indicate the IP address that appears in Tunnelbroker as "Server IPv6 Address", but without the /64 at the end, only the IP address without the prefix. * Tunnel MTU: we select the default value of the tunnel which is 1480. * Tunnel TTL: select 255 which is the default value. In the section of "IPv6 LAN Seetings" we must indicate: * LAN Prefix Length: normally in the tunnels that we create is /64, therefore, we should simply indicate "64". In case you ask for a /48, you must use this prefix. * LAN IPv6 Prefix: we must indicate the address that appears in Tunnelbroker as "Routed /64", but without the /64 at the end, and ended with "::" as you can see. (Translated with www.DeepL.com/Translator) ...................++- I don't have any of that :-( What I have is <https://susepaste.org/3886098>: +++................... IP Tunneling -- 6in4 Tunnel Configuration Name WAN WAN Dynamic IPv4 Mask Length 6rd Prefix Border Relay Address Remove [ADD] [Remove] ...................++- I click the ADD button, and I see <https://susepaste.org/9619892>: +++................... IP Tunneling -- 6in4 Tunnel Configuration Currently, only 6rd configuration is supported. Tunnel Name [....................] Mechanism: 6RD (no other choice is available) Associated WAN Interface: 6/ppp0.1 (other choices are: 3/eth0.2, 2/eth0.3, that do not seem appropriate) Associated LAN Interface: LAN/br0 (no other choices) (*) Manual (*) Automatic (does not seem to change anything) IPv4 Mask Length: [....................] 6rd Prefix with Prefix Length: [....................] Border Relay IPv4 Address: [....................] ...................++- I don't know what to do at this point. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

5 50

[opensuse] using btrfs device remove
by jdd＠dodin.org 20 Aug '19

20 Aug '19

Hello, some time ago, I used "btrfs add" to create a raid 1 for my root partition. Now I want to make a clone of the disk with clone zilla, and, of course, clonezilla don't want it. The two raid partition (each on it's own disk, of course) are not part of the image. So, I guess I need to break the raid just for the time of the clone. my config is: # btrfs fi df / Data, RAID1: total=43.00GiB, used=32.17GiB System, RAID1: total=32.00MiB, used=16.00KiB Metadata, RAID1: total=2.00GiB, used=1.14GiB GlobalReserve, single: total=84.41MiB, used=0.00B all the doc I see ask to add a path to the delete command, but what's the use? anyway the delete command seems to be deprecated and replaced by "remove" (see man page) should I run btrfs device remove /dev/sdb2 /mnt or may be btrfs device remove / I see in man: REMOVE DEVICE Device removal must satisfy the profile constraints, otherwise the command fails. For example: $ btrfs device remove /dev/sda /mnt ERROR: error removing device '/dev/sda': unable to go below two devices on raid1 In order to remove a device, you need to convert the profile in this case: $ btrfs balance start -mconvert=dup -dconvert=single /mnt $ btrfs device remove /dev/sda /mnt still the "/mnt"?? thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 13

[opensuse] NTP bogus timestamps - 15.1
by James Knott 20 Aug '19

20 Aug '19

I was just looking at some NTP packets between my openSUSE desktop system and my firewall, which has a NTP server. I see the timestamps are all bogus values. Reference ID: NULL Reference Timestamp: Jan 1, 1970 00:00:00.000000000 UTC Origin Timestamp: Jan 1, 1970 00:00:00.000000000 UTC Receive Timestamp: Jan 1, 1970 00:00:00.000000000 UTC Transmit Timestamp: Jun 23, 1983 00:21:14.440064618 UTC However, the reply from the server shows correct values. Reference ID: 132.246.11.238 Reference Timestamp: Aug 20, 2019 15:46:02.939010883 UTC Origin Timestamp: Jun 23, 1983 00:21:14.440064618 UTC Receive Timestamp: Aug 20, 2019 16:02:07.892748690 UTC Transmit Timestamp: Aug 20, 2019 16:02:07.892798979 UTC Why are the values from the client nonsense? Proper NTP operation requires accurate time stamps in both directions, to ensure accurate time. For example, the transit time is used to determine the local offset from the server. The packets between my pfSense firewall and the public NTP server show correct values. Reference ID: 132.246.11.238 Reference Timestamp: Aug 20, 2019 16:21:22.937971724 UTC Origin Timestamp: Aug 20, 2019 16:23:07.952061086 UTC Receive Timestamp: Aug 20, 2019 16:23:07.971987723 UTC Transmit Timestamp: Aug 20, 2019 16:31:44.921310040 UTC https://en.wikipedia.org/wiki/Network_Time_Protocol#Timestamps -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] When ldconfig is required?
by Oleksii Vilchanskyi 20 Aug '19

20 Aug '19

I have a CMake project that does install(TARGETS foo bar baz) where foo is an executable, bar and baz are shared libraries. foo is linked to bar and baz, bar is linked to baz. The install manifest: /usr/local/bin/foo /usr/local/lib64/libbar.so.0.0.1 /usr/local/lib64/libbar.so.0 /usr/local/lib64/libbar.so /usr/local/lib64/libbaz.so However, when I run ldd on any of foo or bar, they both cannot resolve links to their just-installed dependencies (... => "not found"). This is despite /etc/ld.so.conf containing things like /usr/local/lib64. RPATH is not hardcoded for any of the library (and I want it to stay that way, since it should work that way). One thing that resolved the dependencies was running sudo ldconfig Although that helped, I am still curious 1) why running ldconfig was necessary (I thought shared libraries are resolved at runtime through loader) 2) do I need to rerun it every time I reinstall foo, bar and baz 3) do I need to rerun it every time I install new executables or libraries under /usr/local I don't know much about how shared libraries work. Maybe I don't understand something. If so, please include some relevant educational content. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] openSUSE Router with IPV6
by Mark Petersen 20 Aug '19

20 Aug '19

With all the chatter about IPV6 lately, I'm working on getting it setup on my home network. My ISP (Charter) does provide IPV6 addresses, but I'm struggling with making this work. I have an odroid C2 ARM board that is running Tumbleweed with 2 network interfaces: eth1 onboard interface is the WAN port. Uses wicked and dhcp to get an ipv4 and ipv6 address from my isp. eth0 on a usb to ethernet adapter is the LAN port. Uses wicked with a static ipv4 address assigned. walter@c2router:~> ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether e8:fc:af:c7:a8:21 brd ff:ff:ff:ff:ff:ff inet 172.16.4.1/24 brd 172.16.4.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::eafc:afff:fec7:a821/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 00:1e:06:36:93:44 brd ff:ff:ff:ff:ff:ff inet 75.xxx.253.3/21 brd 255.255.255.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2605:xxxx:afc0:2:ed44:6b09:12ab:2754/64 scope global dynamic valid_lft 518420sec preferred_lft 518420sec inet6 fe80::21e:6ff:fe36:9344/64 scope link valid_lft forever preferred_lft forever On the LAN side, I have dnsmasq handing out ipv4 addresses and taking care of DNS. This all works great for ipv4, but my workstations on the lan only have an ipv4 address plus an fe80... ipv6 address. In my /etc/sysctl.conf I have: net.ipv4.ip_forward = 1 net.ipv6.conf.all.forwarding = 1 net.ipv6.conf.all.accept_ra = 2 net.ipv6.conf.eth1.autoconf = 0 net.ipv6.conf.all.use_tempaddr = 0 net.ipv6.conf.default.use_tempaddr = 0 I was following this guide: https://taczanowski.net/linux-box-as-an-ipv6-router-with-slaac-and-dhcpv6-p… which was running on openSUSE 42.2 using wide-dhcpv6-client. But wide-dhcpv6 is no longer available on openSUSE. So how can I get wicked to request the prefix from my isp, forward that prefix to dnsmasq so it can hand out ipv6 addresses, and using the prefix set an ipv6 address on the lan interface? Or is there another way? Thanks Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 11

[opensuse] Apache2 with php7 under Leap 15.1
by Wolfgang Mueller 20 Aug '19

20 Aug '19

Having installed apache2 and php7 under Leap 15.1, I started apache2 using the Services Manager of yast2. But Google-chrome and Firefox do not recognize a php script. They treat it as a text file, trying to open and/or download it. What is wrong? Thanks in advance, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 12

[opensuse] Fwd: [opensuse-project] Changing the Chair of the Board
by Knurpht-openSUSE 19 Aug '19

19 Aug '19

For those of you not following the project or factory mailing lists or any other platforms. This FYI ---------- Doorgestuurd bericht ---------- Onderwerp: [opensuse-project] Changing the Chair of the Board Datum: maandag 19 augustus 2019, 10:00:52 CEST Van: Richard Brown <rbrown(a)suse.de> Aan: opensuse-announce(a)opensuse.org, opensuse-project <opensuse- project(a)opensuse.org>, oS-fctry <opensuse-factory(a)opensuse.org> Dear Community, After six years on the openSUSE Board and five as its Chairperson, I have decided to step down as Chair of the openSUSE Board effective today, August 19. This has been a very difficult decision for me to make, with reasons that are diverse, interlinked, and personal. Some of the key factors that led me to make this step include the time required to do the job properly, and the length of time I've served. Five years is more than twice as long as any of my predecessors. The time required to do the role properly has increased and I now find it impossible to balance the demands of the role with the requirements of my primary role as a developer in SUSE, and with what I wish to achieve outside of work and community. As difficult as it is to step back from something I've enjoyed doing for so long, I am looking forward to achieving a better balance between work, community, and life in general. Serving as member and chair of the openSUSE Board has been an absolute pleasure and highly rewarding. Meeting and communicating with members of the project as well as championing the cause of openSUSE has been a joyous part of my life that I know I will miss going forward. openSUSE won't get rid of me entirely. While I do intend to step back from any governance topics, I will still be working at SUSE in the Future Technology Team. Following SUSE's Open Source policy, we do a lot in openSUSE. I am especially looking forward to being able to focus on Kubic & MicroOS much more than I have been lately. As I'm sure it's likely to be a question, I wish to make it crystal clear that my decision has nothing to do with the Board’s ongoing efforts to form an independent openSUSE Foundation. The Board’s decision to form a Foundation had my complete backing as Chairperson, and will continue to have as a regular openSUSE contributor. I have absolute confidence in the openSUSE Board; Indeed, I don't think I would be able to make this decision at this time if I wasn't certain that I was leaving openSUSE in good hands. On that note, SUSE has appointed Gerald Pfeifer as my replacement as Chair. Gerald is SUSE's EMEA-based CTO, with a long history as a Tumbleweed user, an active openSUSE Member, and upstream contributor/maintainer in projects like GCC and Wine. Gerald has been a regular source of advice & support during my tenure as Chairperson. In particular, I will always remember my first visit to FOSDEM as openSUSE Chair. Turning up more smartly dressed than usual, I was surprised to find Gerald, a senior Director at SUSE, diving in to help at the incredibly busy openSUSE booth, and doing so dressed in quite possibly the oldest and most well-loved openSUSE T-shirt I've ever seen. When booth visitors came with questions about SUSE-specific stuff, I think he took some glee in being able to point them in my direction while teasingly saying "Richard is the corporate guy here, I'm just representing the community.." Knowing full well he will continue being so community minded, while finally giving me the opportunity to tease him in return, it is with a similar glee I now hand over the reigns to Gerald. As much as I'm going to miss things about being chairperson of this awesome community, I'm confident and excited to see how openSUSE evolves from here. Keep having a lot of fun, Richard Note: This announcement has been cross-posted in several places, but please send any replies and discussion to the opensuse-project(a)opensuse.org Mailinglist. Thanks! -- To unsubscribe, e-mail: opensuse-project+unsubscribe(a)opensuse.org To contact the owner, email: opensuse-project+owner(a)opensuse.org ------------------------------------------------------- -- Gertjan Lettink a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] podman for SLES 12?
by mh＠mike.franken.de 19 Aug '19

19 Aug '19

Hi *, are there newer podman and dependent packages for SLES 12.4 somewhere around? From software.opensuse.org one can only download a very old podman package and no packages for the dependent software. TIA. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] ulimit problem
by Carlos E. R. 19 Aug '19

19 Aug '19

Hi, for long, in the script that starts certain program, I used this (as plain user): # Avoid huge dump core ops - doesn't work on Leap 42.2 ulimit -H -c 0 echo 0 > /proc/self/coredump_filter program Suddenly, after an update applied yesterday, I get: /home/cer/bin/fusion: line 81: ulimit: core file size: cannot modify limit: Invalid argument Line 81 being: ulimit -H -c 0 What has changed re ulimit? -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

8 17

[opensuse] external disks "disapear" after unmount
by Daniel Bauer 19 Aug '19

19 Aug '19

A small problem on 15.1: When I plug an USB external disk it appears in the icon in the "task bar", I can click to mount it (because they are encrypted, the password is asked). When I don't need it anymore, I click in the same dialog on the "unmount-icon" and it is unmounted. So far everything ok. But: After unmounting it, it disappears from the list of connected devices and is not visible anymore. To mount it again, I must unplug it physically and then plug it again. Before (on 42.3) the device was still visible, the same as if plugged but not mounted. Can I change something, so that the device remains visible even after unmount, just as it was before? (I have an external disk whose cable is - or was... - always connected, but I only mounted it in the moments I needed it. I thought, after unmounting it doesn't turn anymore, thus is less used and lives longer. If I'm wrong please correct me). Another thing is that the MyBook WD external disk keeps blinking (for ever) after unmounting. Before after unmounting the light on the external disk disappeared. Don't know, if this means something. -- Daniel Bauer photographer Basel Málaga https://www.patreon.com/danielbauer https://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 17

[opensuse] Plasma bug
by James Knott 19 Aug '19

19 Aug '19

Every now and then, I get an error about plasma shell. The details are :"Executable: plasmashell PID 3108 Signal: Segmentaion fault (11) Time: ... When I try to report the bug, I can't because I can't recall what I was doing. It just happens no matter what. Has anyone else seen this? this is with KDE4 on 15.1. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 13

[opensuse] Old kernel is used on system with 2 LEAP installations
by zb4ng 19 Aug '19

19 Aug '19

On my desktop, there are two LEAP systems, 15.0 and 15.1. grub is managed by the older version 15.0. Now, i found that on 15.1, an old version of the kernel is used rather than the latest patch: ~\:08:39:37 > uname -a Linux linux-riut 4.12.14-lp151.27-default #1 SMP Fri May 10 14:13:15 UTC 2019 (862c838) x86_64 x86_64 x86_64 GNU/Linux ~\:08:56:31 > uname -r 4.12.14-lp151.27-default ~\:08:56:39 > The kernel patch in use seems to be the first of LEAP 15.1. Auto-Update is active and the new kernel really is installed: ~\:09:59:26 > ls -l /boot | grep vmlinuz lrwxrwxrwx 1 root root 35 16. Aug 20:23 vmlinuz -> vmlinuz-4.12.14-lp151.28.13-default -rw-r--r-- 1 root root 7331952 15. Mai 02:26 vmlinuz-4.12.14-lp151.27-default -rw-r--r-- 1 root root 7340144 15. Jul 13:25 vmlinuz-4.12.14-lp151.28.10-default -rw-r--r-- 1 root root 7344240 11. Aug 10:54 vmlinuz-4.12.14-lp151.28.13-default ~\:09:59:26 > There are no such problems on the 15.0-system. I figured, I should let grub refresh its boot entries, so I started the boot configuration in Yast on 15.0, but had no success with it. Maybe, i could simply delete the old kernels manually? But how can i avoid this from happening every time a new patch is released? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 13

[opensuse] make bootable an otherwise unbootable device
by jdd＠dodin.org 19 Aug '19

19 Aug '19

Hello, This is not a new problem, but it proves habing unpleasant side effects. My ASUS N550JK laptop have initially a dvd reader/writer I have now little use of. So I replaced it by a caddy and drop in there a 500 Gb ssd. My problem is that if dvd are perfectly bootable, the ssd in the caddy is not. is there anyway to make this device bootable? thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] solve an ext4 filesystem size problem
by jdd＠dodin.org 19 Aug '19

19 Aug '19

Hello, I probably classical problem, but I find no usable solution To solve the problems I speak of in other posts, I only could make a brand new install of 15.1. I planned to do so, but not that fast :-( But I had no free space. So I had to make room. I had no (no more) bootable system on this computer, so I started a rescue system on usb stick (15.1 usb one). On this rescue system, I could use parted to shrink an ext4 partition. But I expected parted to also shrink the ext4 file system (as do, I think, gparted), but it didn't. So I now have a partition with a too big file system in it. The initial partition was mostly empty (50 Gb used on 350Gb), so the risk to have lost files is low, anyway I didn't have so many important files there, but I would like to learn how to fix such problem. # e2fsck /dev/sdb4 e2fsck 1.43.8 (1-Jan-2018) The filesystem size (according to the superblock) is 86938065 blocks The physical size of the device is 62524007 blocks Either the superblock or the partition table is likely to be corrupt! what can I do to fix this? thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] vsftpd has stopped working correctly
by Roger Oberholtzer 19 Aug '19

19 Aug '19

I have just updated a Tumbleweed system. It has been running vsftpd just fine. After the update, users can log in, bit anything like a directory listing fails. I see this in the vsftpd log file (error is reported in the last line for the impatient): Mon Aug 19 09:01:21 2019 [pid 28145] FTP response: Client "10.2.10.41", "220 Welcome to RST System's FTP service." Mon Aug 19 09:01:25 2019 [pid 28145] FTP command: Client "10.2.10.41", "USER software" Mon Aug 19 09:01:25 2019 [pid 28145] [software] FTP response: Client "10.2.10.41", "331 Please specify the password." Mon Aug 19 09:01:39 2019 [pid 28145] [software] FTP command: Client "10.2.10.41", "PASS <password>" Mon Aug 19 09:01:39 2019 [pid 28142] [software] OK LOGIN: Client "10.2.10.41" Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", "230 Login successful." Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP command: Client "10.2.10.41", "SYST" Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", "215 UNIX Type: L8" Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP command: Client "10.2.10.41", "FEAT" Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", "211-Features:" Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", " EPRT^M " Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", " EPSV^M " Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", " MDTM^M " Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", " PASV^M " Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", " REST STREAM^M " Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", " SIZE^M " Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", " TVFS^M " Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", " UTF8^M " Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", "211 End" Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP command: Client "10.2.10.41", "PWD" Mon Aug 19 09:01:39 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", "257 "/" is the current directory" Mon Aug 19 09:01:46 2019 [pid 28153] [software] FTP command: Client "10.2.10.41", "EPSV" Mon Aug 19 09:01:46 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", "229 Entering Extended Passive Mode (|||63812|)" Mon Aug 19 09:01:46 2019 [pid 28153] [software] FTP command: Client "10.2.10.41", "LIST" Mon Aug 19 09:01:46 2019 [pid 28153] [software] FTP response: Client "10.2.10.41", "150 Here comes the directory listing." Mon Aug 19 09:01:46 2019 vsftpd [pid 28142]: "software" from "10.2.10.41": not a normal exit in vsf_sysutil_wait_get_exitcode So, the pwd command seems to work. But dir does not. I am not using ssl (ssl_enable=NO). This runs on an internal network at work. I have googled a bit. But I'm none the wiser. The version that was working was at least 6 months old as that's when the last system update was done. Both openSUSE and Windows clients now fail. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] optimus works on 15.1 - VITUALHEAD also
by jdd＠dodin.org 19 Aug '19

19 Aug '19

Hello, after some problems (see elsewhere), I made a fresh install of Leap 15.1. No question else that do you have the same experience? After some work, I could get back my usual working system, and better then It seems optimus/bumblebee works. It seems, because I only could test glfxdemos, but the fps goes from 60 to 430 :-) I also could bet back my full HD screen on said to be only 1366x768 monitor http://www.dodin.org/wiki/pmwiki.php?n=Doc.OptimusVideo in summary: optirun works with nouveau driver, bumblebee *remove* nvidia driver. xf86-video-intel was not installed and I had to use it to get VITUALHEAD (necessary on my Asus ASUS N550JK) openSUSE page https://en.opensuse.org/SDB:NVIDIA_Bumblebee seems a bit obsolete jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] apc stop connecting
by Patrick Shanahan 17 Aug '19

17 Aug '19

I have a UPS NS 1250 which I have used for several years, even had to replace the batteries last year or so. It no longer will connect, since yesterday. it is cable connected via usb and config (/etc/apcupsd/apcupsd.conf): UPSNAME paka-ups UPSCABLE usb UPSTYPE usb DEVICE POLLTIME 10 LOCKFILE /var/lock SCRIPTDIR /etc/apcupsd PWRFAILDIR /etc/apcupsd NOLOGINDIR /etc ONBATTERYDELAY 6 BATTERYLEVEL 5 MINUTES 3 TIMEOUT 0 ANNOY 300 ANNOYDELAY 60 NOLOGON disable KILLDELAY 0 NETSERVER on NISIP 0.0.0.0 NISPORT 3551 EVENTSFILE /var/log/apcupsd.events EVENTSFILEMAX 10 UPSCLASS standalone UPSMODE disable STATTIME 0 STATFILE /var/log/apcupsd.status LOGSTATS off DATATIME 0 UPSNAME paka-ups BATTDATE 01/04/18 SELFTEST 336 apcupsd is not running, fails with: # systemctl status apcupsd ● apcupsd.service - APC UPS Power Control Daemon for Linux Loaded: loaded (/usr/lib/systemd/system/apcupsd.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Sat 2019-08-17 11:22:39 EDT; 2s ago Process: 12425 ExecStartPre=/bin/rm -f /etc/apcupsd/powerfail (code=exited, status=0/SUCCESS) Process: 12429 ExecStart=/usr/sbin/apcupsd -b -f /etc/apcupsd/apcupsd.conf (code=exited, status=1/FAILURE) Main PID: 12429 (code=exited, status=1/FAILURE) Aug 17 11:22:39 crash apcupsd[12429]: apcsmart Aug 17 11:22:39 crash apcupsd[12429]: net Aug 17 11:22:39 crash apcupsd[12429]: snmplite Aug 17 11:22:39 crash apcupsd[12429]: pcnet Aug 17 11:22:39 crash apcupsd[12429]: modbus Aug 17 11:22:39 crash apcupsd[12429]: Most likely, you need to add --enable-usb to your ./configure options. Aug 17 11:22:39 crash apcupsd[12429]: apcupsd FATAL ERROR in apcupsd.c at line 196 Apcupsd cannot continue without a valid driver. Aug 17 11:22:39 crash systemd[1]: apcupsd.service: Main process exited, code=exited, status=1/FAILURE Aug 17 11:22:39 crash apcupsd[12429]: apcupsd error shutdown completed Aug 17 11:22:39 crash systemd[1]: apcupsd.service: Failed with result 'exit-code'. this all worked asis yesterday and years previous. to my knowledge nothing related has changed since the last start of apcupsd. google has lots of comments but cannot ask the correct question or just plain do not know where to look. tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] very annoying grub2 issue, Leap 15.0 / windows 10
by Mathias Homann 16 Aug '19

16 Aug '19

Hi guys, I have a extremely annoying issue with grub2, or more precisely grub2-once. I have two systems that both run a dual boot setup between Leap 15.0 and Windows 10. Both boot from UEFI with secure boot turned OFF. One of them i can choose what to boot next from the command line with grub2-once <number>, and it works just fine: I do "sudo grub2-once 3; sudo systemctl reboot" and I end up in windows, and on next reboot I get my grub menu again The other one, whenever I do the same sequence of "sudo grub2-once 3 ; sudo systemctl reboot" I bot into windows, but then I keep booting into windows - grub2 is not working anymore so the boot sequence defaults to the original windows bootloader... The only differences between the two systems that I can think of are: the working system has one harddisk, the nonworking one has two harddisks (but none of the actual OS installed on the second disk, in both windows and linux) the working system has windows 10 home, the broken one has windows 10 pro any ideas/hints? Cheers MH -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Opening a program in a different computer
by Wolfgang Mueller 16 Aug '19

16 Aug '19

I have two computers installed as shown on this extract of /etc/hosts: 192.168.2.1 fritz.box fb # unknown 192.168.2.16 acer ac # Leap_15.1 192.168.2.11 susa se # SuSE_13.2 It is no problem to start a program, e.g. urxvt, from acer on susa. I simply do it by setting $DISPLAY to susa:0.0 on acer: setenv DISPLAY susa:0.0 urxvt & But the inverse setting does not work: setenv DISPLAY acer:0.0 urxvt & This produces the following error message: "urxvt: can't open display acer:0.0, aborting." In other words, a setting of $DISPLAY under SuSE_13.2 works no more under Leap_15.1. Also, disabling access control by setting xhost + does not help. What can I do to force acer to accept setting $DISPLAY to acer:0.0 ? Thanks in advance and best regards, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 16

[opensuse] How can I set up an NFS server
by Wolfgang Mueller 16 Aug '19

16 Aug '19

Recently I installed Leap 15.1 on one of my computers. Since there is no NFS server available any more in Yast, I tried to make it run manually, setting up an /etc/exports file and enabling and starting "nfsserver" in the Services Manager of Yast, but in vain. Can somebody explain me, how to do it correctly? Thanks in advance and best regards, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 5

[opensuse] Starting a program at boot time
by Wolfgang Mueller 15 Aug '19

15 Aug '19

In the good old days, it was sufficient to make a link to the program in /etc/init.d/rc3.d and /etc/init.d/rc5.d for starting it at boot time: /etc/init.d/rc3.d/S50My_program -> /home/wolfgang/bin/My_program /etc/init.d/rc5.d/S50My_program -> /home/wolfgang/bin/My_program But now under Leap 15.1, that does not work any more. Is there any other way to start a program a boot time? Thanks in advance, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 18

[opensuse] Now I get martians on wlan0
by Carlos E. R. 15 Aug '19

15 Aug '19

Hi, After configuring eth0 to also have an IPv6 addresses, I get martians on wlan, which configured to get address via dhcp6 only, in order to detect when/if the ISP provides it. And of course, it never gets one. Isengard:~ # iwconfig lo no wireless extensions. wlan0 IEEE 802.11 ESSID:"......." Mode:Managed Frequency:2.437 GHz Access Point: 70:8B:CD:59:88:3C Bit Rate=150 Mb/s Tx-Power=22 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:17 Missed beacon:0 eth0 no wireless extensions. Isengard:~ # ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 4c:cc:6a:61:50:a1 brd ff:ff:ff:ff:ff:ff inet 192.168.1.16/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fc00::16/64 scope global valid_lft forever preferred_lft forever inet6 fe80::4ecc:6aff:fe61:50a1/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether a0:d3:7a:82:b3:4c brd ff:ff:ff:ff:ff:ff inet6 fe80::a2d3:7aff:fe82:b34c/64 scope link valid_lft forever preferred_lft forever Isengard:~ # Isengard:~ # systemctl status network ● wicked.service - wicked managed network interfaces Loaded: loaded (/usr/lib/systemd/system/wicked.service; enabled; vendor preset: disabled) Active: active (exited) since Tue 2019-06-25 14:15:54 CEST; 1 months 13 days ago Process: 29081 ExecReload=/usr/sbin/wicked --systemd ifreload all (code=exited, status=0/SUCCESS) Main PID: 1232 (code=exited, status=0/SUCCESS) CPU: 56ms Jun 25 14:15:54 Isengard systemd[1]: Started wicked managed network interfaces. Aug 08 00:16:49 Isengard systemd[1]: Reloading wicked managed network interfaces. Aug 08 00:17:20 Isengard wicked[24538]: eth0 device-ready Aug 08 00:17:20 Isengard wicked[24538]: eth0 up Aug 08 00:17:20 Isengard wicked[24538]: wlan0 setup-in-progress Aug 08 00:17:20 Isengard systemd[1]: Reloaded wicked managed network interfaces. Aug 08 02:37:32 Isengard systemd[1]: Reloading wicked managed network interfaces. Aug 08 02:38:03 Isengard wicked[29081]: wlan0 device-ready Aug 08 02:38:03 Isengard wicked[29081]: wlan0 setup-in-progress Aug 08 02:38:03 Isengard systemd[1]: Reloaded wicked managed network interfaces. Isengard:~ # Why the martians? How do I stop them? <3.6> 2019-08-08T02:38:03.342398+02:00 Isengard wicked 29081 - - wlan0 device-ready <3.6> 2019-08-08T02:38:03.343768+02:00 Isengard wicked 29081 - - wlan0 setup-in-progress <3.6> 2019-08-08T02:38:03.344335+02:00 Isengard systemd 1 - - Reloaded wicked managed network interfaces. <0.4> 2019-08-08T02:42:34.133900+02:00 Isengard kernel - - - [3760166.225960] IPv4: martian source 192.168.1.255 from 192.168.1.16, on dev wlan0 <0.4> 2019-08-08T02:42:34.133934+02:00 Isengard kernel - - - [3760166.225966] ll header: 00000000: ff ff ff ff ff ff 4c cc 6a 61 50 a1 08 00 ......L.jaP... <0.4> 2019-08-08T02:42:35.977964+02:00 Isengard kernel - - - [3760168.069377] IPv4: martian source 192.168.1.255 from 192.168.1.16, on dev wlan0 <0.4> 2019-08-08T02:42:35.977996+02:00 Isengard kernel - - - [3760168.069383] ll header: 00000000: ff ff ff ff ff ff 4c cc 6a 61 50 a1 08 00 ......L.jaP... <0.4> 2019-08-08T02:42:35.978000+02:00 Isengard kernel - - - [3760168.070591] IPv4: martian source 192.168.1.255 from 192.168.1.16, on dev wlan0 <0.4> 2019-08-08T02:42:35.978003+02:00 Isengard kernel - - - [3760168.070594] ll header: 00000000: ff ff ff ff ff ff 4c cc 6a 61 50 a1 08 00 ......L.jaP... <0.4> 2019-08-08T02:42:38.129903+02:00 Isengard kernel - - - [3760170.219883] IPv4: martian source 192.168.1.255 from 192.168.1.16, on dev wlan0 <0.4> 2019-08-08T02:42:38.129933+02:00 Isengard kernel - - - [3760170.219889] ll header: 00000000: ff ff ff ff ff ff 4c cc 6a 61 50 a1 08 00 ......L.jaP... <0.4> 2019-08-08T02:42:38.129938+02:00 Isengard kernel - - - [3760170.222373] IPv4: martian source 192.168.1.255 from 192.168.1.16, on dev wlan0 <0.4> 2019-08-08T02:42:38.129941+02:00 Isengard kernel - - - [3760170.222379] ll header: 00000000: ff ff ff ff ff ff 4c cc 6a 61 50 a1 08 00 ......L.jaP... 192.168.1.16 is the same machine. 192.168.1.3 is the printer. (machine runs Leap 15.0) -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

6 12

[opensuse] Linux Kernel Allows 0.0.0.0/8 as a Valid Address Range
by James Knott 15 Aug '19

15 Aug '19

IPv6 has been around for years. Why don't some people get with the program, instead of coming up with hacks to get around the address shortage. Even with this block, there still won't be enough IPv4 addresses just for mobile devices, let alone everything else. The longer people take to move to IPv6, the worse the problem is going to get. By comparison, on IPv6, the smallest address block, /64 provides as many addresses as the entire IPv4 address space squared. I get 256 of those /64s from my ISP. Some ISPs provide 65K of them to each customer. Why are we wasting our time trying to squeeze more life out of something that should have been retired years ago? Incidentally, this block represents less than 0.4% of the IPv4 address space. Will it really make a difference? https://www.technotification.com/2019/08/linux-kernel-allows-0-0-0-0-8-as-a… -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 59

[opensuse] Repository appears to be outdated. Consider using a different mirror or server.
by Admin Beckspaced 14 Aug '19

14 Aug '19

Dear opensuse users, since weeks I do receive this message when checking for updates: zypper up Loading repository data... Warning: Repository 'Hauptaktualisierungs-Repository (NON-OSS)' appears to be outdated. Consider using a different mirror or server. Reading installed packages... Nothing to do. The repo in question is: leap-15.0-repo-update-non-oss Hauptaktualisierungs-Repository (NON-OSS) http://download.opensuse.org/update/leap/15.0/non-oss/ Is there anything I can do to resolve this? Already cleaned the repo. Did a repo refresh. Tried the https URI Nothing actually really helped ... should I be worried about this? thanks & greetings Becki -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] geoip with 4.12.14-lp151.28.10-default
by Holger Jakob 13 Aug '19

13 Aug '19

I am considering to upgrade from 15.0 to 15.1 but cannot see the respective package to support GEOIP at the kernel level (xtables-addons-kmp-default) in the repositories. Does that mean xt_geoip.ko is not available and thus package xtables-geoip is broken in 15.1? I searched the buglist and could only find an entry for 15.0: Bug 1098188 - iptables geoip is not working kernel 4.12.14-lp150.12.4-default Does that not mean 15.1 is affected as well? Any recommendations for a work around? Holger -- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 14

[opensuse] Tumbleweed - RPM install seems stuck
by Roger Oberholtzer 13 Aug '19

13 Aug '19

I'm updating a Tumbleweed system. There were lots of updates in this one. One of them seems stuck. It is installing btrfsmaintenance-0.4.2-3.1.noarch, and nothing has happened in at least a half an hour. I see these processes running: 00:00:03 /usr/bin/python3 /usr/lib/zypp/plugins/commit/btrfs-defrag-plugin.py 00:00:00 rpm --root / --dbpath /var/lib/rpm -U --percent --noglob --force --nodeps -- /var/cache/zypp/packages/repo-oss/noarch/btrfsmaintenance-0.4.2-3.1.noarch.rpm 00:00:00 /usr/bin/systemctl try-restart btrfsmaintenance-refresh.service btrfsmaintenance-refresh.path btrfs-balance.service btrfs-balance.timer btrfs-defrag.service btrfs-defrag.timer btrfs-scrub.service btrfs-scrub.timer btrfs-trim.service btrfs-trim.timer The times on these seem not to change. OOC, I thought I would see what /usr/lib/zypp/plugins/commit/btrfs-defrag-plugin.py is doing. I see that it is in a read that never seems to return: strace: Process 4567 attached read(0, I am guessing/hoping that file 0 is not stdin. If it is, then the design of that script is broken if it should be run by zypper where the user cannot provide anything to stdin. I am afraid to kill the script. I surely don't want to mess up the file system! -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] Epson Inkjet Printer can't connect
by Doug McGarrett 13 Aug '19

13 Aug '19

Re: Tumbleweed: I have an Epson WP-4530 all-in-one printer/copier/scanner. The Driver is available in /usr/etcetera, and Yast claims to have installed it, and if I try to print something, the Epson is shown as a choice, but nothing happens. If I try to use XSane, a message tells me it can't find a device. Meanwhile, an HP LaserJet Pro is found and prints perfectly. But it can't scan or print in color. I've gotten used to Tumbleweed and I like it, but why won't it print? All help appreciated! --doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 10

[opensuse] ipv6 and ssh
by gumb 12 Aug '19

12 Aug '19

I don't know much about ssh, networking and so on, just enough to have got ssh working on ipv4 between various machines both on my LAN and remotely. Now I'm wanting to try and convert everything to ipv6, since my home ISP has switched to ipv6 by default and in theory it should be simpler overall, but info when googling is limited and outdated. I've had some success already but need more info. 1) I don't fully understand how ipv6 addresses get dished out. I can see, having now set up connections on three machines on my LAN, that one address seems to be the permanent one, chosen automatically for connections, although with one PC it initially chose a different address and settled on that other one later. After looking at info in <ip a> on two machines, the address that I suppose to be the 'main' or permanent one has different things appended. On my old laptop the main one has a /128 suffix followed by 'scope global dynamic'. On my new laptop it has a /64 suffix followed by 'scope global mngtmpaddr noprefixroute dynamic'. Does 'mngtmpaddr' imply it's only temporary? 2) The machine I administer remotely in another country is connected to an ISP that provides a dynamic IP, which has caused me headaches trying to find a method of automatically obtaining the new address each time it changes. If I change over to an ipv6 connection, will they still issue a dynamic address? (I don't know if the dynamic IP is a means to conserving limited ipv4 addresses or if it serves other purposes). 3) I can ssh within my LAN using the link-local address in the console, though I find it much faster and preferable to use a graphical interface and can't find how to make Dolphin accept this address in the 'Network Folder Wizard' dialog. It must need the interface specifying but no matter how I write out the string (%eth0, square brackets, quotes, backslash escapes, etc.) it doesn't accept it. 4) If I ssh to another machine on the LAN but using the afore-mentioned 'global' main address, does this go outside of my LAN, i.e. if I'm only using PAM authentication is there a risk of this being intercepted? Cheers, gumb -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 111

[opensuse] https://bugzilla.mozilla.org/show_bug.cgi?id=700999
by Per Jessen 12 Aug '19

12 Aug '19

Carlos wrote: > I think you simply do not understand the issue. Please read the > bugzilla instead, I did not write it, perhaps you understand them > better than me. > > <https://bugzilla.mozilla.org/show_bug.cgi?id=700999> This is going off-topic, apologies. "Firefox does not appear to support IPv6 link-local addresses". I think I understand the issue perfectly well. > It has 45 entries. > For instance: 34, 37, 29, 10, 17, 32 This morning, I did quickly peruse those comments - they are all from people claiming they _need_ this functionality. In my opinion, they are ignoring the real issue - a misconfigured ipv6 network. Until the network is given a prefix, e.g. 2001:db8:1234:5678, it really is not a functioning ipv6 network. Specifically for your printer issue: run a radvd somewhere, with this config (/etc/radvd.conf) : interface eth0 { AdvSendAdvert on; AdvManagedFlag on; AdvOtherConfigFlag on; too clients { fe80:: .... your printers LL; }; prefix fc00:1234:5678:9000::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; }; With this, your printer is the only device that is permitted to auto-configure itself. Permitting other devices would only cause problems when you don't have any real ipv6 connectivity. I am assuming your printer does not have any desire to "phone home". The minute you start radvd, your printer will auto-configure and assign itself an address on fc00:1234:5678:9000. Grab the LL address from the label, ignoring the fe80:: part and append it to the prefix. You can now access it from your browser: http://[fc00:1234:5678:9000:21e:bff:fe08:4ccb] Or you add it to /etc/hosts and use 'bilbo6': http://bilbo6 -- Per Jessen, Zürich (15.6°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 14

[opensuse] What is this nfs error?
by Carlos E. R. 12 Aug '19

12 Aug '19

I got this error in the log: <0.5> 2019-08-12 10:26:17 Telcontar kernel - - - [138139.721655] rpc-srv/tcp: nfsd: got error -95 when sending 28 bytes - shutting down socket <0.5> 2019-08-12 10:26:17 Telcontar kernel - - - [138139.722238] rpc-srv/tcp: nfsd: got error -95 when sending 28 bytes - shutting down socket An awful number of them! cer@Telcontar:~> grep "nfsd: got error -95" /var/log/messages | wc -l 119341 cer@Telcontar:~> Google does not say what error -95 is about. It started this morning at 10:25, till I stopped "Stopped NFS server and services" at 10:26:17. Ie, I got spammed by 119341 lines in one minute! It happened when another machine tried to mount an NFS directory. If I try again, restarting the service, and try from client, the thing starts again. I tried restarting client nfs, does not clear the issue. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

1 1

[opensuse] NTP question
by James Knott 11 Aug '19

11 Aug '19

On my home network, I have my firewall providing NTP and in turn connecting to a public NTP server. I access my firewall NTP server by host name, which will return both IPv4 and IPv6 addresses. In watching the NTP traffic between my desktop computer and firewall, I see both IPv4 and IPv6 addresses alternately being used. Is this the way the NTP client normally works? I could understand it trying multiple addresses, if that is what I provided, but I only provide a single host name, that returns both IPv4 and IPv6 addresses. Normally, with other apps, IPv6 is preferred over IPv4. This is on openSUSE 15.1 and my firewall/router runs pfSense. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 92

[opensuse] oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"
by ellanios82 11 Aug '19

11 Aug '19

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] something with IPV6 causing Tumbleweed connection problems?
by Patrick Shanahan 11 Aug '19

11 Aug '19

14:43 crash2:~ > ping -v yahoo.com PING yahoo.com(media-router-fp2.prod1.media.vip.bf1.yahoo.com (2001:4998:58:1836::11)) 56 data bytes >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=1 Destination unreachable: Address unreachable >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=2 Destination unreachable: Address unreachable >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=3 Destination unreachable: Address unreachable >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=4 Destination unreachable: Address unreachable >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=5 Destination unreachable: Address unreachable ^C --- yahoo.com ping statistics --- 6 packets transmitted, 0 received, +5 errors, 100% packet loss, time 5067ms 14:44 crash2:~ > ping -v4 yahoo.com PING yahoo.com (98.138.219.231) 56(84) bytes of data. 64 bytes from media-router-fp1.prod1.media.vip.ne1.yahoo.com (98.138.219.231): icmp_seq=1 ttl=50 time=56.8 ms 64 bytes from media-router-fp1.prod1.media.vip.ne1.yahoo.com (98.138.219.231): icmp_seq=2 ttl=50 time=210 ms 64 bytes from media-router-fp1.prod1.media.vip.ne1.yahoo.com (98.138.219.231): icmp_seq=3 ttl=50 time=52.5 ms 64 bytes from media-router-fp1.prod1.media.vip.ne1.yahoo.com (98.138.219.231): icmp_seq=4 ttl=50 time=52.9 ms ^C --- yahoo.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 52.533/93.162/210.476/67.751 ms 14:44 crash2:~ > ping -v6 yahoo.com PING yahoo.com(media-router-fp2.prod1.media.vip.bf1.yahoo.com (2001:4998:58:1836::11)) 56 data bytes >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=1 Destination unreachable: Address unreachable >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=2 Destination unreachable: Address unreachable >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=3 Destination unreachable: Address unreachable >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=4 Destination unreachable: Address unreachable >From 2600:1702:1031:3f90::1 (2600:1702:1031:3f90::1) icmp_seq=5 Destination unreachable: Address unreachable ^C --- yahoo.com ping statistics --- 6 packets transmitted, 0 received, +5 errors, 100% packet loss, time 5048ms wtf is ping default ipv6 now I now have two wireless systems and four wired systems that fail pinging yahoo.com (or anywhere else except locally) unless "-4" is specified. previously, two days ago, all systems worked w/o a problem and w/o the need to specify ipv4. I even had to deny ipv6 in "yast lan" in order to connect to yahoo/google/... which seem to default to ipv6 addresses. but... zypper refreshes ok so it must be using ipv4 address resolution??? -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 32

[opensuse] Problem with missing wxWidgets-ansi and slic3r
by Markus Egg 10 Aug '19

10 Aug '19

Hello, I solved the problems with media data with using that packman stuff. Now I test on a laptop how to get 3D printing running. Cura is there in the repos, pronterface also, but I am missing slic3r which I always used. There is some slic3r package in the repos "slic3r - G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.) Version: 1.2.9+1125+ga54ca922-1.71 Build Time: Mo 11 Mär 2019 15:23:43 CET Package Group: Applications/Engineering License: AGPL-3.0 and CC-BY-3.0 ... Distribution: Vendor: obs://build.opensuse.org/devel:languages:perl Packager: Architecture: x86_64 Build Host: URL: http://slic3r.org/ Source Package: slic3r-1.2.9+1125+ga54ca922-1.71 Media No.: 1 Authors: " but this says it needs libboost_filesystem.so.1.68 The boost library is installed as 1.69 from the repos. Of course breaking the dependencies does not work since it still is looking for 1.68. I already tried with a compiled/installed boost 1.70 but this did not help. When compiling slic3r from scratch from here: https://github.com/slic3r/Slic3r/wiki/Running-Slic3r-from-git-on-GNU-Linux the prequisite "No provider of 'wxWidgets-ansi-devel' found." is missing. I tried https://software.opensuse.org/package/wxWidgets-ansi but there is no package for tumbleweed: "Es ist kein offizielles Paket für openSUSE Tumbleweed verfügbar" So it looks like I have to compile wXWidget also from scratch or do you have any other idea? I did this already on the old SuSE 13.1 machine where I got slic3r and repetierHost runnning for 3D printing so compiling and installing is no problem for me but I hoped that there is already more present in the newest tumbleweed... Thanks in advance BR ME -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Tumbleweed advice
by Roger Oberholtzer 10 Aug '19

10 Aug '19

I have an old Tumbleweed install that has been sitting on a shelf. OOC, I thought I would try to update it. I know it has been perhaps too long, but it is just a test. The problem is related to zypper-migration-plugin, which I am pretty sure I want to get updated correctly! The other problems are not an issue, as I see it. systems:~ # cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20170929" ID=opensuse ID_LIKE="suse" VERSION_ID="20170929" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20170929" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" systems:~ # zypper dup Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. Loading repository data... Reading installed packages... Computing distribution upgrade... 6 Problems: Problem: problem with installed package python-cx_Freeze-4.3.2-1.2.i586 Problem: problem with installed package windowswmproto-devel-1.0.4-3.1.i586 Problem: problem with installed package wine-mono-4.5.2-10.7.noarch Problem: nothing provides rubygem(ruby:2.6.0:suse-connect) >= 0.3.10 needed by zypper-migration-plugin-0.12.1536145027.be6a3dd-1.5.noarch Problem: libopenssl-1_0_0-devel-1.0.2r-1.4.i586 conflicts with libopenssl-devel > 1.0.2r provided by libopenssl-devel-1.1.1c-1.1.noarch Problem: transfig-3.2.7a-2.6.i586 requires texlive-epstopdf, but this requirement cannot be provided [SNIP] Problem: nothing provides rubygem(ruby:2.6.0:suse-connect) >= 0.3.10 needed by zypper-migration-plugin-0.12.1536145027.be6a3dd-1.5.noarch Solution 1: keep obsolete zypper-migration-plugin-0.10.1488806253.1c712c3-1.2.noarch Solution 2: break zypper-migration-plugin-0.12.1536145027.be6a3dd-1.5.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c] (c): Neither solution seems hopeful. Any better options? Even if the system is not being used right now, I would like to keep it set up. I would prefer not to lose it. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 11

[opensuse] SpamAssassin problem
by Carlos E. R. 09 Aug '19

09 Aug '19

I get this error in warning log: <2.4> 2019-08-09 00:24:40 Telcontar spamd 25709 - - razor2: razor2 check failed: Connection refused razor2: razor2 had unknown error during get_server_info at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/Razor2.pm line 187. at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/Razor2.pm line 330. <2.4> 2019-08-09 00:24:43 Telcontar spamd 25721 - - razor2: razor2 check failed: Connection refused razor2: razor2 had unknown error during get_server_info at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/Razor2.pm line 187. at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/Razor2.pm line 330. and this other: <2.4> 2019-08-09 08:45:34 Telcontar spamd 19516 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN28009> line 860. <2.4> 2019-08-09 08:45:34 Telcontar spamd 19516 - - Use of uninitialized value $3 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN28009> line 860. <2.4> 2019-08-09 08:45:34 Telcontar spamd 19516 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044, <GEN28009> line 860. and a few of these: <2.4> 2019-08-09 08:46:27 Telcontar spamd 19871 - - dns: new_dns_packet (domain=...(.zen.spamhaus.org. type=A class=IN) failed: a domain name contains a null label and these: <2.4> 2019-08-09 08:47:53 Telcontar spamd 20438 - - Use of uninitialized value $2 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044. <2.4> 2019-08-09 08:55:34 Telcontar spamd 23421 - - Use of uninitialized value $4 in concatenation (.) or string at /usr/lib/perl5/vendor_perl/5.26.1/Mail/SpamAssassin/Plugin/URIDNSBL.pm line 1044. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

2 1

[opensuse] Generating play lists
by Carlos E. R. 08 Aug '19

08 Aug '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, The last time I needed to generate a play list for an USB stick of mp3 files I used eyeD3. That package is now missing. <https://eyed3.readthedocs.io/en/latest/> What else can I use? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXUs1VRwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfV/uAAnjYfrp3KiXZfft5p/IH7 pLV3D4M5AJ9AjFXJiLKO9f1TQQ3SmlrrbvHK8Q== =cXSQ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Newbie; need autoinst.xml help
by Leam Hall 08 Aug '19

08 Aug '19

If you have a tutorial you can point me to, that's great! I'm familiar with Kickstart, but not autoinst.xml. Trying to figure out how to have a SuSE system add a user to the sudoers file when the server is created. Any links or HOWTOs? Thanks! Leam -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] baloo AND tracker-miners?
by George from the tribe 08 Aug '19

08 Aug '19

While I have issues with baloo which I will address at some other time, I noticed that on my desktop I am running both baloo and tracker-miners indexing software. I do not have gnome installed, but the information on tracker-miners says that it is "desktop neutral" indexing software. So I am wondering, is it necessary to have both of these running? I mean, I see the value of indexing software in general, but how much more value does it add to my system to have both of these running? When I am looking for a file, I almost always use the command line commands of grep and find, and rarely, if ever, do a search using a graphical file manager like dolphin. The only time that would apply is in some directories that have lots of files, with dolphin I can hit the first few letters of a filename and bring those files into view. But I don't know if that is because of one of these indexing files or not. -- George Box: 15.1 | Plasma 5 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 15.1 | Plasma 5 | AMD FX 7TH GEN | 64 | 32GB Laptop #2: 15.1 | Plasma 5 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Cisco bugs, VMware-Nvidia guest escapes, KDE hijacking, and more
by David C. Rankin 08 Aug '19

08 Aug '19

The fun never ends... El Reg Your mid-week infosec news bonanza: Cisco bugs, VMware-Nvidia guest escapes, KDE hijacking, and more https://www.theregister.co.uk/2019/08/07/security_midweek_roundup/ -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Why can not I ping an IPv6 host by name? Culprit is nscd!
by Carlos E. R. 08 Aug '19

08 Aug '19

Hi, Testing things. The name resolves, with both IPv4 and IPv6 addresses: cer@Telcontar:~> host Isengard Isengard.valinor has address 192.168.1.16 Isengard.valinor has IPv6 address fc00::16 cer@Telcontar:~> I can ping "normally": Telcontar:~ # ping -c 2 -v Isengard ping: socket: Permission denied, attempting raw socket... ping: socket: Permission denied, attempting raw socket... PING Isengard.valinor (192.168.1.16) 56(84) bytes of data. 64 bytes from Isengard.valinor (192.168.1.16): icmp_seq=1 ttl=64 time=0.309 ms 64 bytes from Isengard.valinor (192.168.1.16): icmp_seq=2 ttl=64 time=0.325 ms --- Isengard.valinor ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1000ms rtt min/avg/max/mdev = 0.309/0.317/0.325/0.008 ms Telcontar:~ # I can not ping by name if I force IPv6: Telcontar:~ # ping -c 2 -v -6 Isengard ping: socket: Permission denied, attempting raw socket... connect: Invalid argument Telcontar:~ # I can ping just fine by writing the IPv6 address, so there is connectivity: Telcontar:~ # ping -c 2 -v -6 fc00::16 ping: socket: Permission denied, attempting raw socket... PING fc00::16(fc00::16) 56 data bytes 64 bytes from fc00::16: icmp_seq=1 ttl=64 time=0.351 ms 64 bytes from fc00::16: icmp_seq=2 ttl=64 time=0.346 ms --- fc00::16 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1023ms rtt min/avg/max/mdev = 0.346/0.348/0.351/0.018 ms Telcontar:~ # Why? Using strace I get a clue. Telcontar:~ # strace -o ping.strace ping -6 -v Isengard.valinor ping: socket: Permission denied, attempting raw socket... connect: Invalid argument Telcontar:~ # execve("/usr/bin/ping", ["ping", "-6", "-v", "Isengard.valinor"], 0x7ffcb19d01e8 /* 68 vars */) = 0 brk(NULL) = 0x55f7e88b9000 ... futex(0x7fc5cd4419c8, FUTEX_WAKE_PRIVATE, 2147483647) = 0 capget({version=_LINUX_CAPABILITY_VERSION_3, pid=0}, NULL) = 0 capget({version=_LINUX_CAPABILITY_VERSION_3, pid=0}, {effective=0, permitted=1<<CAP_NET_RAW, inheritable=0}) = 0 capset({version=_LINUX_CAPABILITY_VERSION_3, pid=0}, {effective=1<<CAP_NET_RAW, permitted=1<<CAP_NET_RAW, inheritable=0}) = 0 rt_sigprocmask(SIG_UNBLOCK, [ALRM], NULL, 8) = 0 rt_sigaction(SIGALRM, {sa_handler=0x55f7e6ab4810, sa_mask=[], sa_flags=SA_RESTORER|SA_INTERRUPT, sa_restorer=0x7fc5cd0c21e0}, NULL, 8) = 0 socket(AF_INET6, SOCK_DGRAM, IPPROTO_ICMPV6) = -1 EACCES (Permission denied) write(2, "ping: socket: Permission denied,"..., 58) = 58 socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6) = 3 capget({version=_LINUX_CAPABILITY_VERSION_3, pid=0}, NULL) = 0 capget({version=_LINUX_CAPABILITY_VERSION_3, pid=0}, {effective=1<<CAP_NET_RAW, permitted=1<<CAP_NET_RAW, inheritable=0}) = 0 capset({version=_LINUX_CAPABILITY_VERSION_3, pid=0}, {effective=0, permitted=1<<CAP_NET_RAW, inheritable=0}) = 0 socket(AF_UNIX, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0) = 4 connect(4, {sa_family=AF_UNIX, sun_path="/var/run/nscd/socket"}, 110) = 0 sendto(4, "\2\0\0\0\r\0\0\0\6\0\0\0hosts\0", 18, MSG_NOSIGNAL, NULL, 0) = 18 poll([{fd=4, events=POLLIN|POLLERR|POLLHUP}], 1, 5000) = 1 ([{fd=4, revents=POLLIN|POLLHUP}]) recvmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="hosts\0", iov_len=6}, {iov_base="\310O\3\0\0\0\0\0", iov_len=8}], msg_iovlen=2, msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET, cmsg_type=SCM_RIGHTS, cmsg_data=[5]}], msg_controllen=20, msg_flags=MSG_CMSG_CLOEXEC}, MSG_CMSG_CLOEXEC) = 14 mmap(NULL, 217032, PROT_READ, MAP_SHARED, 5, 0) = 0x7fc5ce0b5000 close(5) = 0 close(4) = 0 socket(AF_INET6, SOCK_DGRAM, IPPROTO_IP) = 4 connect(4, {sa_family=AF_INET6, sin6_port=htons(1025), inet_pton(AF_INET6, "fe80::4ecc:6aff:fe61:50a1", &sin6_addr), sin6_flowinfo=htonl(0), sin6_scope_id=0}, 28) = -1 EINVAL (Invalid argument) write(2, "connect: Invalid argument\n", 26) = 26 exit_group(2) = ? +++ exited with 2 +++ It is trying to contact "fe80::4ecc:6aff:fe61:50a1" instead of what DNS answers. This is in /etc/hosts, so I edit it out - another problem now: Telcontar:~ # ping -c 2 -v -6 Isengard ping: socket: Permission denied, attempting raw socket... ping: Isengard: Name or service not known Telcontar:~ # execve("/usr/bin/ping", ["ping", "-6", "-v", "Isengard.valinor"], 0x7ffd8fe17238 /* 68 vars */) = 0 brk(NULL) = 0x55af0e17e000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) ... write(2, "ping: socket: Permission denied,"..., 58) = 58 socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6) = 3 capget({version=_LINUX_CAPABILITY_VERSION_3, pid=0}, NULL) = 0 capget({version=_LINUX_CAPABILITY_VERSION_3, pid=0}, {effective=1<<CAP_NET_RAW, permitted=1<<CAP_NET_RAW, inheritable=0}) = 0 capset({version=_LINUX_CAPABILITY_VERSION_3, pid=0}, {effective=0, permitted=1<<CAP_NET_RAW, inheritable=0}) = 0 socket(AF_UNIX, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0) = 4 connect(4, {sa_family=AF_UNIX, sun_path="/var/run/nscd/socket"}, 110) = 0 sendto(4, "\2\0\0\0\r\0\0\0\6\0\0\0hosts\0", 18, MSG_NOSIGNAL, NULL, 0) = 18 poll([{fd=4, events=POLLIN|POLLERR|POLLHUP}], 1, 5000) = 1 ([{fd=4, revents=POLLIN|POLLHUP}]) recvmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="hosts\0", iov_len=6}, {iov_base="\310O\3\0\0\0\0\0", iov_len=8}], msg_iovlen=2, msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET, cmsg_type=SCM_RIGHTS, cmsg_data=[5]}], msg_controllen=20, msg_flags=MSG_CMSG_CLOEXEC}, MSG_CMSG_CLOEXEC) = 14 mmap(NULL, 217032, PROT_READ, MAP_SHARED, 5, 0) = 0x7ffafb5aa000 close(5) = 0 close(4) = 0 socket(AF_UNIX, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0) = 4 connect(4, {sa_family=AF_UNIX, sun_path="/var/run/nscd/socket"}, 110) = 0 sendto(4, "\2\0\0\0\16\0\0\0\21\0\0\0Isengard.valinor\0", 29, MSG_NOSIGNAL, NULL, 0) = 29 poll([{fd=4, events=POLLIN|POLLERR|POLLHUP}], 1, 5000) = 1 ([{fd=4, revents=POLLIN|POLLHUP}]) read(4, "\2\0\0\0\1\0\0\0\1\0\0\0\4\0\0\0\21\0\0\0\0\0\0\0", 24) = 24 read(4, "\300\250\1\20\2Isengard.valinor\0", 22) = 22 close(4) = 0 write(2, "ping: Isengard.valinor: Name or "..., 50) = 50 exit_group(2) = ? +++ exited with 2 +++ Why does it say the name is not known, when it is known? Telcontar:~ # host Isengard Isengard.valinor has address 192.168.1.16 Isengard.valinor has IPv6 address fc00::16 Telcontar:~ # host Isengard.valinor Isengard.valinor has address 192.168.1.16 Isengard.valinor But if I stop nscd it works! Telcontar:~ # systemctl restart nscd Telcontar:~ # host Isengard.valinor Isengard.valinor has address 192.168.1.16 Isengard.valinor has IPv6 address fc00::16 Telcontar:~ # ping -c 2 -v -6 Isengard ping: socket: Permission denied, attempting raw socket... ping: Isengard: Name or service not known Telcontar:~ # systemctl stop nscd Telcontar:~ # ping -c 2 -v -6 Isengard ping: socket: Permission denied, attempting raw socket... PING Isengard(Isengard6.valinor (fc00::16)) 56 data bytes 64 bytes from Isengard6.valinor (fc00::16): icmp_seq=1 ttl=64 time=0.323 ms 64 bytes from Isengard6.valinor (fc00::16): icmp_seq=2 ttl=64 time=0.327 ms --- Isengard ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1030ms rtt min/avg/max/mdev = 0.323/0.325/0.327/0.002 ms Telcontar:~ # -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

1 0

[opensuse] rsync question--link-dest= question
by Carlos E. R. 07 Aug '19

07 Aug '19

Hi, Suppose I do this rsync run: OPTIONS="--archive --acls --xattrs --hard-links --sparse --stats --human-readable " DESTINATION=001 rsync $OPTIONS --password-file /root/cripta/keys/rsync.secrets \ --relative --include=/data/vmware** --include=/data/storage_** --include=/data/cripta** --include=/data/xtr** --include=/data/raid** \ --exclude=/lost+found --exclude=/dev --exclude=/sys --exclude=/proc --exclude=/run \ --exclude=/data/** --exclude=/mnt --exclude=/other --exclude=/media --exclude=/var/lib/samba/lock/ --exclude=/var/run/ \ / root@Isengard::MyBook_Telcontar/$DESTINATION This creates a backup run to machine Isengard wich has an rsyncd daemon running. We can check on it this way: Telcontar:~ # rsync --password-file /root/cripta/keys/rsync.secrets root@Isengard:: mirrors clonar directorio a disco externo de archivado fusion clonar directorio a disco externo de archivado Videos clonar directorio a disco externo de archivado MyBook_Telcontar copia de seguridad de Telcontar Telcontar:~ # We can see the directories there: Telcontar:~ # rsync --password-file /root/cripta/keys/rsync.secrets root@Isengard::MyBook_Telcontar drwxr-xr-x 28 2019/08/05 16:09:19 . drwxr-xr-x 0 2019/08/01 14:55:28 000 drwxr-xr-x 384 2018/11/24 11:04:40 001 drwxr-xr-x 364 2018/11/24 11:04:40 002 drwxr-xr-x 22 2019/08/05 16:14:45 cosas Telcontar:~ # The backup is created. Now, when I do a second backup, the intention is to do it to another directory (002), making all unchanged files hard links to the previous backup. rsync is informed of the existence of a previous backup using "--link-dest". I have done this before on local directories: rsync $OPTIONS --link-dest=$PREVIOUS/boot /boot /$DESTINATION Now, this does not work: OPTIONS="--archive --acls --xattrs --hard-links --sparse --stats --human-readable " DESTINATION=002 PREVIOUS=001 rsync $OPTIONS --password-file /root/cripta/keys/rsync.secrets --link-dest=root@Isengard::MyBook_Telcontar/$PREVIOUS/ \ --relative --include=/data/vmware** --include=/data/storage_** --include=/data/cripta** --include=/data/xtr** --include=/data/raid** \ --exclude=/lost+found --exclude=/dev --exclude=/sys --exclude=/proc --exclude=/run \ --exclude=/data/** --exclude=/mnt --exclude=/other --exclude=/media --exclude=/var/lib/samba/lock/ --exclude=/var/run/ \ / root@Isengard::MyBook_Telcontar/$DESTINATION I get this error: --link-dest arg does not exist: root@Isengard::MyBook_Telcontar/001 But it does, AFAIK: Telcontar:~ # rsync --password-file /root/cripta/keys/rsync.secrets root@Isengard::MyBook_Telcontar/001 drwxr-xr-x 384 2018/11/24 11:04:40 001 Telcontar:~ # Telcontar:~ # rsync --password-file /root/cripta/keys/rsync.secrets root@Isengard::MyBook_Telcontar/001/ drwxr-xr-x 384 2018/11/24 11:04:40 . -rw-r--r-- 52,184 2016/12/24 00:59:15 .readahead -rw------- 19,127 2017/09/25 02:03:08 DEADJOE -rw------- 4,288,512 2015/02/24 14:28:22 core drwxr-xr-x 24 2016/03/14 14:40:16 %{_rundir} ... I also tried: rsync $OPTIONS --password-file /root/cripta/keys/rsync.secrets --link-dest=$PREVIO \ ... --link-dest arg does not exist: 001 What am I doing wrong? Or is --link-dest not supported on rsyncd daemon (remote)? Both $DESTINATION and $PREVIOUS are on the same partition (btrfs), so hard links are possible. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

5 10

[opensuse] Audio conversion question
by Carlos E. R. 07 Aug '19

07 Aug '19

Hi, I have a bunch of audio files with extension aac. I want to use them on the car, so I'm trying to convert to mp3. I'm using soundconverter, which seems easy to do - but the results are not what I expect (output trimmed to avoid wrap: 812618 0001 -- Eartha Kitt - Je Cherche un Homme.aac 2737704 0001 -- Eartha Kitt - Je Cherche un Homme.mp3 493130 0002 -- Laura Fygi - Quelqu'un m'aimera.aac 2229610 0002 -- Laura Fygi - Quelqu'un m'aimera.mp3 1156682 0003 -- Coralie Clement - Samba de Mon CSur qui Bat.aac 5229555 0003 -- Coralie Clement - Samba de Mon CSur qui Bat.mp3 As you can see, the resulting mp3 files are way bigger than the originals. What can I do? -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

6 26

[opensuse] Microsoft Intune
by Roger Oberholtzer 07 Aug '19

07 Aug '19

Anyone have any experience with Microsoft Intune from a Linux client? Just got a message from IT that this is how e-mail will be managed from now on. On phones, for example, it can only be accessed via Outlook. The existence of a web interface is unclear. No mention of Linux client support: https://docs.microsoft.com/en-us/intune/supported-devices-browsers Sigh. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4