July 2020 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Firefox and HTML5
by James Knott 06 Jul '20

06 Jul '20

I've noticed some sites now require HTML5, which Firefox apparently doesn't support, at least not the version in Leap 15.2. I tried installing an addin, but that didn't work. HTML5 works in Chromium. Any plans to correct this? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

15 50

[opensuse] Boring error messages
by Wolfgang Mueller 06 Jul '20

06 Jul '20

After I upgraded to Leap 15.2, boring error messages appear showing the following content: Software updates 1 min ago Update error Failed to obtain authentication. See also http://ariannuccia.de/temp/update_error.k76.jpg Is there any way to provide the missing authentication? If not so, how can I suppress the messages? Thanks in advance and best regards, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Task bar no longer sorted in 15.2
by James Knott 05 Jul '20

05 Jul '20

Yesterday, I upgraded 2 systems to Leap 15.2. I've noticed a couple of differences on the task bar. First off, open items are no longer sorted alphabetically. Also, apps running on other virtual desktops are no longer shown on the task bar. For example, I have 4 virtual desktops in KDE. If I have something running on desktop 2, it's not in the task bar for desktop 1. Why were these changed? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 21

[opensuse] Leap 15.2 : No CPU boost on AMD Bristol Ridge
by Simon Heimbach 04 Jul '20

04 Jul '20

Hello everybody, I just did a fresh install of Leap 15.2 on my notebook with an AMD A10-9600P (Excavator, Bristol Ridge). While the system works, it is sluggish under load and I notice, that the CPU does not change its core-frequencies. When running watch -n1 "cat /proc/cpuinfo | grep \"^[c]pu MHz\"" I always get cpu MHz : 798.283 cpu MHz : 798.485 cpu MHz : 798.307 cpu MHz : 798.423 KsysGuard (the KDE advanced system monitor) reports exactly the same. The chip theoretically boosts up to 2.4 Ghz and did so under Leap 15.1 and other previous releases. How can I get my CPU to boost again? Any help is highly appreciated! Thank you! Simon -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] 15.2 iso gpg signature control?
by Stakanov 03 Jul '20

03 Jul '20

Is it not available any more? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] Leap 15.2 - different link local addr with network manager and wicked ?
by Per Jessen 03 Jul '20

03 Jul '20

Two new 15.2 installs - with wicked, I get the mac-derived LL address, which means my radvd needs no changing. With NM, I get some other LL address, definitely not mac-derived. I want the mac-derived LL, how do I get that? -- Per Jessen, Zürich (21.1°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] Lacking a bootable partition?
by Michael Fischer 01 Jul '20

01 Jul '20

Hello all (and hopefully Andrei), While reading the recent thread (... Zypper dup renders 15.1 to 15.2...) I got curious about my own system - which had a reinstall (15.0) a few months ago, which went...poorly. It took several installs and boot attempts to get the thing to come up (which is really odd because it was a reinstall of 15.0 on top of the same 15.0 on seemingly perfectly good hardware) Now I see that perhaps my /boot/efi is not configured correctly? bootinfoscript doesn't even find/describe the disk where /boot/efi lives, (/dev/nvme0n1) for some reason. The guts of my system is $ df -h Filesystem Size Used Avail Use% Mounted on /dev/nvme0n1p2 233G 9.3G 212G 5% / /dev/nvme0n1p1 500M 5.1M 495M 2% /boot/efi /dev/sdb1 458G 97G 338G 23% /home There are a few data/backup/etc. disks attached, I ignore these for simplicity $ blkid /dev/nvme0n1* /dev/nvme0n1: PTUUID="c2d48243-da0e-456d-bd55-d3bee176dbec" PTTYPE="gpt" /dev/nvme0n1p1: SEC_TYPE="msdos" UUID="5591-235C" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="f95c0606-ecaa-44af-8fd0-51f9980f26a9" /dev/nvme0n1p2: UUID="65da4abd-8d32-4a12-a6d3-5f237343714d" TYPE="ext4" PARTLABEL="primary" PARTUUID="0c505856-c975-4f34-9119-7a9e70d78b2c" $ sudo fdisk -l /dev/nvme0n1* Disk /dev/nvme0n1: 238.5 GiB, 256060514304 bytes, 500118192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: C2D48243-DA0E-456D-BD55-D3BEE176DBEC Device Start End Sectors Size Type /dev/nvme0n1p1 2048 1026047 1024000 500M Microsoft basic data /dev/nvme0n1p2 3147776 500117503 496969728 237G Linux filesystem Disk /dev/nvme0n1p1: 500 MiB, 524288000 bytes, 1024000 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Disk /dev/nvme0n1p2: 237 GiB, 254448500736 bytes, 496969728 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes $ ls -al /boot/efi/EFI/opensuse/ total 3600 drwxr-xr-x 3 root root 8192 Feb 14 16:29 . drwxr-xr-x 4 root root 8192 Feb 14 11:07 .. -rwxr-xr-x 1 root root 58 Feb 14 11:07 boot.csv drwxr-xr-x 2 root root 8192 Feb 14 16:29 fw -rwxr-xr-x 1 root root 70464 Feb 14 16:29 fwupx64.efi -rwxr-xr-x 1 root root 155 Feb 14 11:07 grub.cfg -rwxr-xr-x 1 root root 1060704 Feb 14 11:07 grub.efi -rwxr-xr-x 1 root root 123904 Feb 14 11:07 grubx64.efi -rwxr-xr-x 1 root root 1158688 Feb 14 11:07 MokManager.efi -rwxr-xr-x 1 root root 1208968 Feb 14 11:07 shim.efi (that `fw` directory is empty) For comparison, a simple one-disk system I have (also on 15.0) which "makes sense" > sudo blkid /dev/sda1: LABEL="ESP" UUID="4A08-2713" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="bd98a04b-2b82-4a57-9652-75c0189aaf2a" /dev/sda2: UUID="b34af9ea-c375-4b96-9adb-5fc88bcdf2f1" TYPE="swap" PARTUUID="be766a1e-c3de-4283-b18d-0fa489b74b1f" /dev/sda3: UUID="7716718f-9d03-470a-8a21-11e2aba10247" TYPE="ext4" PARTUUID="45b0ca46-3e31-4dbe-8475-bfb53ecb119c" > sudo fdisk -l /dev/sda [sudo] password for root: Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 2E601350-1A64-4CD5-9D45-A9E7BB0C428F Device Start End Sectors Size Type /dev/sda1 2048 1333247 1331200 650M EFI System /dev/sda2 1333248 5527551 4194304 2G Linux swap /dev/sda3 5527552 1953525134 1947997583 928.9G Linux filesystem > ls -al /boot/efi/EFI/opensuse/ total 3492 drwxr-xr-x 2 root root 4096 Dec 3 2018 . drwxr-xr-x 6 root root 4096 Dec 3 2018 .. -rwxr-xr-x 1 root root 58 Dec 3 2018 boot.csv -rwxr-xr-x 1 root root 155 Dec 3 2018 grub.cfg -rwxr-xr-x 1 root root 1060704 Dec 3 2018 grub.efi -rwxr-xr-x 1 root root 123904 Dec 3 2018 grubx64.efi -rwxr-xr-x 1 root root 1158688 Dec 3 2018 MokManager.efi -rwxr-xr-x 1 root root 1208968 Dec 3 2018 shim.efi I note that the md5sums of the files in the two machines /boot/efi/EFI/opensuse are all different (not sure if that means anything or not). So, is this a case of "boot from rescue disk and run various grub commands to re-write /boot/efi and all should be well" or ...? Many thanks from a man afraid to reboot his main computer. Michael -- Michael Fischer michael(a)visv.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 25