January 2019 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] Mapping and re-mapping Keyboard Keys
by Paul Groves 14 Mar '19

14 Mar '19

On 27/06/17 12:22, Paul Groves wrote: > > On 27/06/17 08:34, Aaron Digulla wrote: >> xmodmap -pke | less > > These keycodes do not seem to match the system. For example in the > output of this command it says: > > keycode 158 = XF86WWW NoSymbol XF86WWW > > I ran setkeycodes e020 158 > > When I press the e020 (Internet) button xev says I have pressed code > 166 (Back button). > > How on earth has this happened? I specified 158 not 166. What have I > done wrong? > > Just been emailed this link: https://unix.stackexchange.com/questions/49650/how-to-get-keycodes-for-xmod… To quote this article: Here you can see keycode 97 is unused on my system: |keycode 94 = less greater less greater bar brokenbar keycode 95 = F11 XF86Switch_VT_11 F11 XF86Switch_VT_11 keycode 96 = F12 XF86Switch_VT_12 F12 XF86Switch_VT_12 keycode 97 = keycode 98 = Katakana NoSymbol Katakana keycode 99 = Hiragana NoSymbol Hiragana | The keycode X uses and the keycode the kernel uses are OFF BY 8 for "historical reasons". So take 97 - 8 = 89 and use 89 with the setkeycodes command (again as root): So to make my vol - button work (xmodmap keycode 122 -8 = 114) setkeycodes e01e 114 This has worked! I have re-mapped apl the buttons apart from my hotkeys. >> No but there are lots of uncommon keycodes which you can use. For >> example, F13-F35 or KP_F1...KP_F4. > > In the output of the command xmodmap -pke | less there are no codes > for F13-F35 or KP_F1 etc > > I would like to set HK1 - HK4 to F13 - F16 How do I find the keycodes > for these buttons Still looking for the keycodes for F13-16 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 19

[opensuse] Spec'ing a 50 TB dedicated storage subsystem and room to grow?
by Greg Freemyer 22 Feb '19

22 Feb '19

All, I bought a used iSCSI based Drobo in 2016 with 50TB in it. It works great, but it isn't fast by today's standards. (100 MB/sec absolute max). And I never got it to work from openSUSE (Windows and Mac did work). I now need to buy something similar, but with fast I/O and Linux support: 10 Gbit Ethernet and fibre-channel may be my only options? Or are there point-to-point SAS external racks I should consider? Also, I will likely want to put a SSD based cache in the mix at some point. It could be integrated into the storage subsystem, or I could use something like bcache and have the SSD be in the server,. It just needs to be reliable and fast. Recommendations? (I'm thinking used and $10K at the high-end for the subsystem including PCIx cards and switches, if needed.) == details I need to buy a server with 50TB usable disk for a production environment. A high speed disk subsystem is critical. And the project may scale up over time. It doesn't need to be a fail-over cluster, just a single server. I'm looking at used equipment most likely. I was thinking one with 4 CPU sockets would let me start with 2 CPUs and then expand to 4 later on. Lots of RAM capacity would also be great. My first thought was to get a Dell R920 and throw a bunch of disks in it. https://goo.gl/images/x3Rfj2 24 disk slots! But then I looked at what size drives are available for those slots: 2.5 inch. I only see 2TB drives max. I'm hoping to use a Dell server because it's the preferred brand at my (new) job. Unless I'm missing something a standalone rack mount Dell won't work. So, now I'm looking at a used R820 most likely and some sort of disk subsystem to support it. I picked it because it is only a 5-year old design and it has 4 CPU sockets I can expand into as the server demand increases over time. Also 3TB max ram is way above what this will require, even long term. https://media.adn.de/media/DE/DocLib/Poweredge_Easy_Matrix.pdf A used, barebones R820 can be had for under $2K. Just add CPUs and ram. Greg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 41

[opensuse] I have lost sound after upgrading to 15.0
by Carlos E. R. 20 Feb '19

20 Feb '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 That's it, no sound at all. Hardware is the same. On 42.3 it worked perfectly; nothing now. YaST produces no sound after going through the configuration. The mixer says there is no card to configure. Log: <10.3> 2019-01-10 19:43:12 Telcontar gnomesu-pam-backend - - - The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring/control <10.3> 2019-01-10 19:43:12 Telcontar gnomesu-pam-backend - - - gkr-pam: couldn't unlock the login keyring. <10.7> 2019-01-10 19:43:12 Telcontar gnomesu-pam-backend - - - pam_systemd(gnomesu-pam:session): Cannot create session: Already running in a session or user slice <10.6> 2019-01-10 19:43:12 Telcontar gnomesu-pam-backend - - - pam_unix(gnomesu-pam:session): session opened for user root by (uid=1000) <1.4> 2019-01-10 19:43:12 Telcontar y2controlcenter 24515 - - QStandardPaths: XDG_RUNTIME_DIR points to non-existing path '/run/user/0', please create it with 0700 permissions. <1.4> 2019-01-10 19:43:12 Telcontar y2controlcenter 24515 - - QStandardPaths: XDG_RUNTIME_DIR points to non-existing path '/run/user/0', please create it with 0700 permissions. <1.4> 2019-01-10 19:43:12 Telcontar y2controlcenter 24515 - - Qt: Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed <3.6> 2019-01-10 19:43:17 Telcontar dbus-daemon 1455 - - [system] Activating service name='org.opensuse.Snapper' requested by ':1.1597' (uid=0 pid=24553 comm="/usr/bin/snapper create --type=pre --cleanup-algor") (using servicehelper) <3.6> 2019-01-10 19:43:17 Telcontar dbus-daemon 1455 - - [system] Successfully activated service 'org.opensuse.Snapper' <1.4> 2019-01-10 19:44:40 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <0.3> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.342868] snd_hda_intel 0000:03:00.0: CORB reset timeout#1, CORBRP = 0 <0.6> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.486423] snd_hda_codec_ca0110 hdaudioC0D1: autoconfig for CA0110-IBG: line_outs=4 (0xb/0xd/0xc/0xe/0x0) type:line <0.6> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.486427] snd_hda_codec_ca0110 hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <0.6> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.486429] snd_hda_codec_ca0110 hdaudioC0D1: hp_outs=1 (0xf/0x0/0x0/0x0/0x0) <0.6> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.486431] snd_hda_codec_ca0110 hdaudioC0D1: mono: mono_out=0x0 <0.6> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.486433] snd_hda_codec_ca0110 hdaudioC0D1: dig-out=0x12/0x0 <0.6> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.486435] snd_hda_codec_ca0110 hdaudioC0D1: inputs: <0.6> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.486438] snd_hda_codec_ca0110 hdaudioC0D1: Front Mic=0x11 <0.6> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.486440] snd_hda_codec_ca0110 hdaudioC0D1: Rear Mic=0x10 <0.6> 2019-01-10 19:44:40 Telcontar kernel - - - [115233.486442] snd_hda_codec_ca0110 hdaudioC0D1: dig-in=0x13 <0.6> 2019-01-10 19:44:41 Telcontar kernel - - - [115234.667476] input: HDA Creative Front Mic as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input17 <0.6> 2019-01-10 19:44:41 Telcontar kernel - - - [115234.667568] input: HDA Creative Rear Mic as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input18 <0.6> 2019-01-10 19:44:41 Telcontar kernel - - - [115234.667663] input: HDA Creative Line Out Front as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input19 <0.6> 2019-01-10 19:44:41 Telcontar kernel - - - [115234.667754] input: HDA Creative Line Out Surround as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input20 <0.6> 2019-01-10 19:44:41 Telcontar kernel - - - [115234.667845] input: HDA Creative Line Out CLFE as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input21 <0.6> 2019-01-10 19:44:41 Telcontar kernel - - - [115234.667935] input: HDA Creative Line Out Side as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input22 <0.6> 2019-01-10 19:44:41 Telcontar kernel - - - [115234.668034] input: HDA Creative Front Headphone as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input23 <1.4> 2019-01-10 19:44:41 Telcontar baloo_file 5397 - - message repeated 8 times: [ QObject::connect: invalid null parameter] <3.6> 2019-01-10 19:44:41 Telcontar systemd 1 - - Starting Save/Restore Sound Card State... <1.4> 2019-01-10 19:44:41 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <3.6> 2019-01-10 19:44:41 Telcontar systemd 1 - - Started Save/Restore Sound Card State. <3.6> 2019-01-10 19:44:41 Telcontar systemd 1 - - Reached target Sound Card. <1.3> 2019-01-10 19:44:42 Telcontar pulseaudio 5099 - - [pulseaudio] module-alsa-card.c: Failed to find a working profile. <1.3> 2019-01-10 19:44:42 Telcontar pulseaudio 5099 - - [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_03_00.0" card_name="alsa_card.pci-0000_03_00.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""): initialization failed. <3.6> 2019-01-10 19:45:04 Telcontar systemd-udevd 661 - - Network interface NamePolicy= disabled by default. <3.6> 2019-01-10 19:45:04 Telcontar systemd 1 - - sound.target: Unit not needed anymore. Stopping. <3.6> 2019-01-10 19:45:04 Telcontar systemd 1 - - Stopped target Sound Card. <1.4> 2019-01-10 19:45:05 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <0.3> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.230993] snd_hda_intel 0000:03:00.0: CORB reset timeout#1, CORBRP = 0 <0.6> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.371950] snd_hda_codec_ca0110 hdaudioC0D1: autoconfig for CA0110-IBG: line_outs=4 (0xb/0xd/0xc/0xe/0x0) type:line <0.6> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.371953] snd_hda_codec_ca0110 hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <0.6> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.371955] snd_hda_codec_ca0110 hdaudioC0D1: hp_outs=1 (0xf/0x0/0x0/0x0/0x0) <0.6> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.371957] snd_hda_codec_ca0110 hdaudioC0D1: mono: mono_out=0x0 <0.6> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.371958] snd_hda_codec_ca0110 hdaudioC0D1: dig-out=0x12/0x0 <0.6> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.371959] snd_hda_codec_ca0110 hdaudioC0D1: inputs: <0.6> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.371962] snd_hda_codec_ca0110 hdaudioC0D1: Front Mic=0x11 <0.6> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.371964] snd_hda_codec_ca0110 hdaudioC0D1: Rear Mic=0x10 <0.6> 2019-01-10 19:45:05 Telcontar kernel - - - [115258.371965] snd_hda_codec_ca0110 hdaudioC0D1: dig-in=0x13 <1.4> 2019-01-10 19:45:05 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <3.6> 2019-01-10 19:45:05 Telcontar systemd 1 - - Reloading. <3.4> 2019-01-10 19:45:05 Telcontar systemd 1 - - nss-lookup.target: Dependency Before=nss-lookup.target dropped <0.6> 2019-01-10 19:45:06 Telcontar kernel - - - [115259.606863] input: HDA Creative Front Mic as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input24 <1.4> 2019-01-10 19:45:06 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <3.6> 2019-01-10 19:45:06 Telcontar systemd 1 - - Reached target Sound Card. <0.6> 2019-01-10 19:45:06 Telcontar kernel - - - [115259.608040] input: HDA Creative Rear Mic as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input25 <0.6> 2019-01-10 19:45:06 Telcontar kernel - - - [115259.609035] input: HDA Creative Line Out Front as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input26 <0.6> 2019-01-10 19:45:06 Telcontar kernel - - - [115259.609530] input: HDA Creative Line Out Surround as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input27 <0.6> 2019-01-10 19:45:06 Telcontar kernel - - - [115259.611352] input: HDA Creative Line Out CLFE as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input28 <0.6> 2019-01-10 19:45:06 Telcontar kernel - - - [115259.613443] input: HDA Creative Line Out Side as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input29 <0.6> 2019-01-10 19:45:06 Telcontar kernel - - - [115259.614868] input: HDA Creative Front Headphone as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input30 <1.4> 2019-01-10 19:45:06 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <1.4> 2019-01-10 19:45:06 Telcontar baloo_file 5397 - - message repeated 9 times: [ QObject::connect: invalid null parameter] <1.3> 2019-01-10 19:45:06 Telcontar pulseaudio 5099 - - [pulseaudio] module-alsa-card.c: Failed to find a working profile. <1.3> 2019-01-10 19:45:06 Telcontar pulseaudio 5099 - - [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_03_00.0" card_name="alsa_card.pci-0000_03_00.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""): initialization failed. <10.6> 2019-01-10 19:45:10 Telcontar gnomesu-pam-backend - - - pam_unix(gnomesu-pam:session): session closed for user root <10.3> 2019-01-10 19:46:33 Telcontar gnomesu-pam-backend - - - The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring/control <10.3> 2019-01-10 19:46:33 Telcontar gnomesu-pam-backend - - - gkr-pam: couldn't unlock the login keyring. <10.7> 2019-01-10 19:46:33 Telcontar gnomesu-pam-backend - - - pam_systemd(gnomesu-pam:session): Cannot create session: Already running in a session or user slice <10.6> 2019-01-10 19:46:33 Telcontar gnomesu-pam-backend - - - pam_unix(gnomesu-pam:session): session opened for user root by (uid=1000) <1.4> 2019-01-10 19:46:33 Telcontar y2controlcenter 25189 - - QStandardPaths: XDG_RUNTIME_DIR points to non-existing path '/run/user/0', please create it with 0700 permissions. <1.4> 2019-01-10 19:46:34 Telcontar y2controlcenter 25189 - - QStandardPaths: XDG_RUNTIME_DIR points to non-existing path '/run/user/0', please create it with 0700 permissions. <1.4> 2019-01-10 19:46:34 Telcontar y2controlcenter 25189 - - Qt: Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed <3.6> 2019-01-10 19:46:37 Telcontar dbus-daemon 1455 - - [system] Activating service name='org.opensuse.Snapper' requested by ':1.1603' (uid=0 pid=25227 comm="/usr/bin/snapper create --type=pre --cleanup-algor") (using servicehelper) <3.6> 2019-01-10 19:46:37 Telcontar dbus-daemon 1455 - - [system] Successfully activated service 'org.opensuse.Snapper' <3.6> 2019-01-10 19:46:49 Telcontar systemd 1 - - sound.target: Unit not needed anymore. Stopping. <3.6> 2019-01-10 19:46:49 Telcontar systemd 1 - - Stopped target Sound Card. <1.4> 2019-01-10 19:46:50 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <0.3> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.811402] snd_hda_intel 0000:03:00.0: CORB reset timeout#1, CORBRP = 0 <0.6> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.960117] snd_hda_codec_ca0110 hdaudioC0D1: autoconfig for CA0110-IBG: line_outs=4 (0xb/0xd/0xc/0xe/0x0) type:line <0.6> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.960120] snd_hda_codec_ca0110 hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <0.6> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.960123] snd_hda_codec_ca0110 hdaudioC0D1: hp_outs=1 (0xf/0x0/0x0/0x0/0x0) <0.6> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.960125] snd_hda_codec_ca0110 hdaudioC0D1: mono: mono_out=0x0 <0.6> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.960127] snd_hda_codec_ca0110 hdaudioC0D1: dig-out=0x12/0x0 <0.6> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.960129] snd_hda_codec_ca0110 hdaudioC0D1: inputs: <0.6> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.960132] snd_hda_codec_ca0110 hdaudioC0D1: Front Mic=0x11 <0.6> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.960134] snd_hda_codec_ca0110 hdaudioC0D1: Rear Mic=0x10 <0.6> 2019-01-10 19:47:07 Telcontar kernel - - - [115379.960136] snd_hda_codec_ca0110 hdaudioC0D1: dig-in=0x13 <0.6> 2019-01-10 19:47:08 Telcontar kernel - - - [115381.149513] input: HDA Creative Front Mic as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input31 <0.6> 2019-01-10 19:47:08 Telcontar kernel - - - [115381.149602] input: HDA Creative Rear Mic as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input32 <0.6> 2019-01-10 19:47:08 Telcontar kernel - - - [115381.149686] input: HDA Creative Line Out Front as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input33 <0.6> 2019-01-10 19:47:08 Telcontar kernel - - - [115381.149768] input: HDA Creative Line Out Surround as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input34 <0.6> 2019-01-10 19:47:08 Telcontar kernel - - - [115381.149850] input: HDA Creative Line Out CLFE as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input35 <0.6> 2019-01-10 19:47:08 Telcontar kernel - - - [115381.153903] input: HDA Creative Line Out Side as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input36 <0.6> 2019-01-10 19:47:08 Telcontar kernel - - - [115381.154014] input: HDA Creative Front Headphone as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input37 <1.4> 2019-01-10 19:47:08 Telcontar baloo_file 5397 - - message repeated 4 times: [ QObject::connect: invalid null parameter] <3.6> 2019-01-10 19:47:08 Telcontar systemd 1 - - Reached target Sound Card. <1.4> 2019-01-10 19:47:08 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <1.4> 2019-01-10 19:47:08 Telcontar baloo_file 5397 - - message repeated 6 times: [ QObject::connect: invalid null parameter] <1.3> 2019-01-10 19:47:08 Telcontar pulseaudio 5099 - - [pulseaudio] module-alsa-card.c: Failed to find a working profile. <1.3> 2019-01-10 19:47:08 Telcontar pulseaudio 5099 - - [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_03_00.0" card_name="alsa_card.pci-0000_03_00.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""): initialization failed. <3.6> 2019-01-10 19:47:41 Telcontar systemd-udevd 661 - - Network interface NamePolicy= disabled by default. <3.6> 2019-01-10 19:47:41 Telcontar systemd 1 - - sound.target: Unit not needed anymore. Stopping. <3.6> 2019-01-10 19:47:41 Telcontar systemd 1 - - Stopped target Sound Card. <1.4> 2019-01-10 19:47:42 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <0.3> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.829952] snd_hda_intel 0000:03:00.0: CORB reset timeout#1, CORBRP = 0 <0.6> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.977490] snd_hda_codec_ca0110 hdaudioC0D1: autoconfig for CA0110-IBG: line_outs=4 (0xb/0xd/0xc/0xe/0x0) type:line <0.6> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.977493] snd_hda_codec_ca0110 hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <0.6> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.977495] snd_hda_codec_ca0110 hdaudioC0D1: hp_outs=1 (0xf/0x0/0x0/0x0/0x0) <0.6> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.977496] snd_hda_codec_ca0110 hdaudioC0D1: mono: mono_out=0x0 <0.6> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.977498] snd_hda_codec_ca0110 hdaudioC0D1: dig-out=0x12/0x0 <0.6> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.977499] snd_hda_codec_ca0110 hdaudioC0D1: inputs: <0.6> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.977501] snd_hda_codec_ca0110 hdaudioC0D1: Front Mic=0x11 <0.6> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.977503] snd_hda_codec_ca0110 hdaudioC0D1: Rear Mic=0x10 <0.6> 2019-01-10 19:47:42 Telcontar kernel - - - [115414.977504] snd_hda_codec_ca0110 hdaudioC0D1: dig-in=0x13 <1.4> 2019-01-10 19:47:42 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <3.6> 2019-01-10 19:47:42 Telcontar systemd 1 - - Reloading. <3.4> 2019-01-10 19:47:42 Telcontar systemd 1 - - nss-lookup.target: Dependency Before=nss-lookup.target dropped <1.4> 2019-01-10 19:47:43 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <0.6> 2019-01-10 19:47:43 Telcontar kernel - - - [115416.224217] input: HDA Creative Front Mic as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input38 <0.6> 2019-01-10 19:47:43 Telcontar kernel - - - [115416.224305] input: HDA Creative Rear Mic as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input39 <0.6> 2019-01-10 19:47:43 Telcontar kernel - - - [115416.224928] input: HDA Creative Line Out Front as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input40 <0.6> 2019-01-10 19:47:43 Telcontar kernel - - - [115416.225048] input: HDA Creative Line Out Surround as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input41 <0.6> 2019-01-10 19:47:43 Telcontar kernel - - - [115416.225137] input: HDA Creative Line Out CLFE as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input42 <0.6> 2019-01-10 19:47:43 Telcontar kernel - - - [115416.225220] input: HDA Creative Line Out Side as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input43 <0.6> 2019-01-10 19:47:43 Telcontar kernel - - - [115416.225305] input: HDA Creative Front Headphone as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/sound/card0/input44 <1.4> 2019-01-10 19:47:43 Telcontar baloo_file 5397 - - message repeated 3 times: [ QObject::connect: invalid null parameter] <3.6> 2019-01-10 19:47:43 Telcontar systemd 1 - - Reached target Sound Card. <1.4> 2019-01-10 19:47:43 Telcontar baloo_file 5397 - - QObject::connect: invalid null parameter <1.4> 2019-01-10 19:47:43 Telcontar baloo_file 5397 - - message repeated 6 times: [ QObject::connect: invalid null parameter] <1.3> 2019-01-10 19:47:43 Telcontar pulseaudio 5099 - - [pulseaudio] module-alsa-card.c: Failed to find a working profile. <1.3> 2019-01-10 19:47:43 Telcontar pulseaudio 5099 - - [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_03_00.0" card_name="alsa_card.pci-0000_03_00.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""): initialization failed. The relevant line seems to be: <1.3> 2019-01-10 19:47:43 Telcontar pulseaudio 5099 - - [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_03_00.0" card_name="alsa_card.pci-0000_03_00.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""): initialization failed. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXDeV2Rwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfV32oAnjkBdKbi6mTEkRSQ+Yan Il2jykIIAKCFh482bGobF4eLqWJ46BReQjp9vw== =8XD2 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 10

[opensuse] Discard vs. dm-crypt
by Matthias Bach 05 Feb '19

05 Feb '19

Hi, On multiple of my machines I have the root filesystem on a dm-crypt device placed on an SSD. Now, I would like to use `fstrim /`. Now, I know about the security implications. But, as encryption for me primarily is a way to be able to throw out disks without further effort, I don't consider those a problem for me. Sadly, on any system I installed directly with Leap 15.0 I cannot get this to work. Despite having `rd.luks.options=discard` in my kernel arguments I get the following output from `lsblk`: # lsblk --discard /dev/sda NAME DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO sda 0 512B 2G 0 ├─sda1 0 512B 2G 0 ├─sda2 0 512B 2G 0 └─sda3 0 512B 2G 0 └─cr_sda3 0 0B 0B 0 Curiously the same works on a different systems which has been upgraded through various versions of Leap and is now also running on 15.0. # lsblk --discard /dev/sda NAME DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO sda 0 512B 2G 0 ├─sda1 0 512B 2G 0 ├─sda2 0 512B 2G 0 ├─sda3 0 512B 2G 0 ├─sda4 0 512B 2G 0 ├─sda5 0 512B 2G 0 └─sda6 0 512B 2G 0 └─luks-081…3e1 0 512B 2G 0 The only difference I can see between the systems is, that the older system uses the UUID instead of the name, and for some reason the newer system does have the device containing root in `/etc/crypttab` while the old system does not. Any hints on what might be causing the different behavior? Kind Regards, Matthias -- Dr. Matthias Bach www.marix.org „Der einzige Weg, die Grenzen des Möglichen zu finden, ist ein klein wenig über diese hinaus in das Unmögliche vorzustoßen.“ - Arthur C. Clarke

4 18

[opensuse] gcc 4.8 needed?
by Richmond 04 Feb '19

04 Feb '19

Seamonkey does not compile properly with gcc 7. Although it works superficially, it crashes on a website. Leap 15 does not have 4.8. We need a backward compatible compiler don't we? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 11

[opensuse] What is this problem and how to solve it?
by Basil Chupin 02 Feb '19

02 Feb '19

I am trying to update my wife's Leap 15.0 system and get this error when using either zypper or Yast2. I am using the kernel from the ../Kernel:/stable/standard/ repository on my Leap 15.0 as well as hers but I am not having this hassle. When using zypper to update I get this error msg (pls see attached zypper_error-31.png) and when using Yast I get the error msg in the attached Yast_error-31.png. Yesterday when I tried to do same, the 'zypper up' got a lot further in the installation - pls see attached zypper_error.png. I have run 'zypper clean -a' and 'zypper refresh -fdb' but this hasn't helped. Anyone please suggest what is causing this problem and how to how to get rid of the cause of this problem? BC -- 'When I use a word', Humpty Dumpty said, in a rather scornful tone, 'it means just what I choose it to mean.' Lewis Carroll, Through the Looking-Glass

8 41

[opensuse] how to play MP4 files on Firefox
by don fisher 02 Feb '19

02 Feb '19

I am running Firefox 60.4 under 42.3. In the past I was able to play .mp4 files using my browser. A recent trial failed. What am I doing wrong and how can I view these files? don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 11

[opensuse] /var/adm/backup/rpmdb
by Felix Miata 31 Jan '19

31 Jan '19

The cron script cron.daily makes daily copies of the database (packed with gzip) and stores them in /var/adm/backup/rpmdb. The number of copies is controlled by the variable MAX_RPMDB_BACKUPS (default: 5) in /etc/sysconfig/backup. The size of a single backup is approximately 1 MB for 1 GB in /usr. 1-Why 5? 2-What do I loose if if I keep 1 or 2 instead of 5? 3-What do they offer that rpm --rebuilddb doesn't? 4-Why isn't rebuilddb in the rpm manual? 5-Why 30,000k per backup file? (My /usr is typically <3G total, including /usr/local/ which is on a separate filesystem.) >From TW20181124: /var/adm/backup/rpmdb# ls -Ggh total 134M -rw-r--r-- 1 27M Jul 29 06:24 Packages-20180729.gz -rw-r--r-- 1 27M Aug 2 03:50 Packages-20180802.gz -rw-r--r-- 1 27M Sep 30 13:48 Packages-20180930.gz -rw-r--r-- 1 27M Dec 1 20:38 Packages-20181201.gz -rw-r--r-- 1 27M Dec 2 00:04 Packages-20181202.gz -rw-r--r-- 1 36 Dec 2 00:04 rpmdb_recent_md5 -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 10

[opensuse] Update trouble
by A. den Oudsten 31 Jan '19

31 Jan '19

After updates since 20180115 in Tumbleweed I get Removal of (56408)plasma5-addons-lang-5.14.4-1.1.noarch(@System) failed: Error: Subprocess failed. Error: RPM failed: error: package plasma5-addons-lang-5.14.4-1.1.noarch is not installed and now updates! What can be the solution? Tia André den Oudsten -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] KDE and recent locations
by Roger Oberholtzer 30 Jan '19

30 Jan '19

We have an interesting issue that I think is caused by KDE and recent locations. I think that when you start KDE, something is attempting to access directories that you have recently been in, for example in Dolphin. Sounds innocent. However, if you: 1. Turn on two computers. One is your openSUSE with KDE (the mount client), and the other shares a drive. 2. Mount a remote drive during one login session. Perhaps visit the mounted drive with dolphin. As one does. 3. Exit all programs in KDE and then log out. Turn off the computers. 4. Turn on only your linux computer and log in to the desktop. What happens is that the desktop is very unresponsive. The mouse moves, but nothing else. For a very long time. Turn on the remote computer and suddenly all works. The system startup and getting to the login is quick as usual. It is after the KDE login that the fun starts. We also see that if the remote computer is turned off at any time, the entire KDE desktop suddenly gets unresponsive. Until the remote computer comes back. We are using automount (defined fully in /etc/fstab) for this because having the mounts not be automount is a problem when the remote system is not available. Which, in the real world, can be the case. All of this only happens in KDE. If the system is turned on and one logs in via ssh (no desktop), the system works as expected. It is interesting that as soon as one starts KDE - even if one is not accessing a remote drive in any open application - suddenly the last places that were visited are being automounted. Until KDE is started, the mounts are not done. It is KDE that is making this happen. Originally we thought this might be because we had the drives mounted in the user's $HOME. We changed that so they are automounted in /media. No difference. It looks like KDE wants, somewhere, to keep accessing recent places you have visited. So the automount option to unmount drives not accessed in some time has no effect. KDE will keep accessing them. Even if no open program is doing so. If this only effected accessing these remote drives, we could survive. But for the entire desktop to be unresponsive is a problem. It has been reported that ATL-CTRL-DEL in the KDE desktop gets you to the logout screen directly, and then the system is responsive. This is openSUSE 42.3, and what ever KDE is had. I realize that this is perhaps older and not interesting. I have not been able to test this on a newer openSUSE release. Which is too bad. Is there any way to tell KDE to not try to access these locations? Or to not freeze the whole desktop when a mount is not available? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 17