January 2019 - openSUSE Users - openSUSE Mailing Lists

[opensuse] brltty Prevents Arduino to Access Serial Port
by Andi Sugandi 24 Jan '19

24 Jan '19

Hi all, I have ESP8266 NodeMCU (Arduino) device attached via USB port on openSUSE Leap 15 laptop. Arduino IDE (from https://downloads.arduino.cc/arduino-1.8.8-linux64.tar.xz) shoud have accessed it (via serial port: /dev/ttyUSB0) automatically, but it failed. dmesg said: -------------------- ... [ 9453.175187] ---[ end trace 073159a74b1f43ff ]--- [12104.746651] usb 3-1: new full-speed USB device number 9 using xhci_hcd [12104.926058] usb 3-1: New USB device found, idVendor=10c4, idProduct=ea60 [12104.926063] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [12104.926066] usb 3-1: Product: CP2102 USB to UART Bridge Controller [12104.926069] usb 3-1: Manufacturer: Silicon Labs [12104.926071] usb 3-1: SerialNumber: 0001 [12104.934447] cp210x 3-1:1.0: cp210x converter detected [12104.936387] usb 3-1: cp210x converter now attached to ttyUSB0 [12105.884270] usb 3-1: usbfs: interface 0 claimed by cp210x while 'brltty' sets config #1 [12105.885172] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [12105.885207] cp210x 3-1:1.0: device disconnected [12109.381111] input: BRLTTY 5.5 Linux Screen Driver Keyboard as /devices/virtual/input/input20 -------------------- $ tail -f /var/log/messages: http://paste.opensuse.org/view/simple/87354116 $ lsusb ... Bus 003 Device 009: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP2102/CP2109 UART Bridge Controller [CP210x family] Arduino IDE finally could access the serial port after removing brltty (brltty-5.5-lp150.3.5.x86_64) package (or simply by stopping the brltty(a)-dev-bus-usb-003-009.service?) -------------------- $ dmesg (after removing brltty package) ... [12104.746651] usb 3-1: new full-speed USB device number 9 using xhci_hcd [12104.926058] usb 3-1: New USB device found, idVendor=10c4, idProduct=ea60 [12104.926063] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [12104.926066] usb 3-1: Product: CP2102 USB to UART Bridge Controller [12104.926069] usb 3-1: Manufacturer: Silicon Labs [12104.926071] usb 3-1: SerialNumber: 0001 [12104.934447] cp210x 3-1:1.0: cp210x converter detected [12104.936387] usb 3-1: cp210x converter now attached to ttyUSB0 [12105.884270] usb 3-1: usbfs: interface 0 claimed by cp210x while 'brltty' sets config #1 [12105.885172] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [12105.885207] cp210x 3-1:1.0: device disconnected [12109.381111] input: BRLTTY 5.5 Linux Screen Driver Keyboard as /devices/virtual/input/input20 [12822.469854] usb 3-1: USB disconnect, device number 9 [12875.486696] usb 3-1: new full-speed USB device number 10 using xhci_hcd [12875.666073] usb 3-1: New USB device found, idVendor=10c4, idProduct=ea60 [12875.666079] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [12875.666082] usb 3-1: Product: CP2102 USB to UART Bridge Controller [12875.666084] usb 3-1: Manufacturer: Silicon Labs [12875.666087] usb 3-1: SerialNumber: 0001 [12875.674444] cp210x 3-1:1.0: cp210x converter detected [12875.676463] usb 3-1: cp210x converter now attached to ttyUSB0 -------------------- Should I fill a bug (against brltty package)? Best regards, -- Andi Sugandi. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] 2018-2019 openSUSE Board Election Candidates Update
by Fraser_Bell 24 Jan '19

24 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Only 11 days left to get your openSUSE Membership approved so you can vote in the openSUSE Board Elections. Here is the 4th installment in the "Meet Your openSUSE Board Elections Candidates" series at openSUSE News. Meet Sébastien Poher aka sogal: <url>https://news.opensuse.org/2019/01/24/2018-2019-opensuse-board-elections-mee…</url> You can find out more about the Elections here: <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) openSUSE Member openSUSE Global Moderator openSUSE Contributor YaST Contributor aka Fraser_Bell on the Forums, OBS, IRC, and mail at openSUSE.org Fraser-Bell on Github -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Firefox 60esr - New Tab, Howto Remove .outer-wrapper height: 100%
by David C. Rankin 23 Jan '19

23 Jan '19

Tail end of 42.2. Moving from 52.9esr to 60.4esr the new tab for search page is radically different. After disabling all the cruft leaving the search and top-sites (as 52.9) the search bar and top sites are now centered in the page instead of providing a nicely formatted search at the top with top-sites below. Digging with the inspector, the problem is the css on: <div class="outer-wrapper wide-layout-enabled" data-reactroot=""> where you have: .outer-wrapper { display: flex; flex-grow: 1; height: 100%; <-- this is the problem, deleting fixes padding: 30px 32px 32ps; } Removing the `height: 100%;` restores the desired layout. How do I make this permanent in userChrome.css or userContent.css? What do I put there and which file does it go in? Asked on support.mozilla, but no response yet, so I thought I would ask here: https://support.mozilla.org/en-US/questions/1247523#answer-1190570 (screenshot of inspector output posted there) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Syncing two imap accounts
by Carlos E. R. 23 Jan '19

23 Jan '19

Hi, I use imapsync to sync my dovecot imap on my laptop to my desktop. From laptop --> desktop, never in reverse direction. Actually, for the reverse I use plain rsync to copy across all folders. Brute force. When updating it now, I notice this paragraph: «imapsync is not adequate for maintaining two active imap accounts in synchronization where the user plays independently on both sides. Use offlineimap (written by John Goerzen) or mbsync (written by Michael R. Elkins) for 2 ways synchronizations.» Has anybody done that, any thoughts to share? The goal is to keep laptop and desktop machine dovecot accounts in sync, in both directions. Even better, two laptops and one desktop. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

11 60

[opensuse] Odd system log message about /boot/efi
by Roger Oberholtzer 23 Jan '19

23 Jan '19

I have a system that is reporting this in the system log: [ 5.931249] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. This is: /dev/sda2 20M 748K 20M 4% /boot/efi Would I really want to run fsck on that? The system is starting/stopping as expected. It is just this message in the system log. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] how to read requirement and get an rpm value? thanks!
by Linda Walsh 23 Jan '19

23 Jan '19

Some of these ruby requirements don't seem to have the requirement of needing to be read and found by a human. Ideas? error: Failed build dependencies: rubygem(ruby:2.1.0:abstract_method) is needed by yast2-4.1.0-1.1.x86_64 rubygem(ruby:2.1.0:cfa) is needed by yast2-4.1.0-1.1.x86_64 rubygem(ruby:2.1.0:cheetah) is needed by yast2-4.1.0-1.1.x86_64 rubygem(ruby:2.1.0:rspec) is needed by yast2-4.1.0-1.1.x86_64 rubygem(ruby:2.1.0:simpleidn) is needed by yast2-4.1.0-1.1.x86_64 closest matches: ruby2.2-rubygem-abstract_method-1.2.1-2.3.x86_64.rpm ruby2.2-rubygem-abstract_method-doc-1.2.1-2.3.x86_64.rpm ruby2.3-rubygem-abstract_method-1.2.1-2.3.x86_64.rpm ruby2.3-rubygem-abstract_method-doc-1.2.1-2.3.x86_64.rpm ruby2.4-rubygem-abstract_method-1.2.1-2.6.x86_64.rpm ruby2.4-rubygem-abstract_method-doc-1.2.1-2.6.x86_64.rpm ruby2.5-rubygem-abstract_method-1.2.1-2.10.x86_64.rpm ruby2.5-rubygem-abstract_method-doc-1.2.1-2.10.x86_64.rpm none of which help resolve any dependencies -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 14

[opensuse] Re: how to read "req's" and get an rpm value? thanks!
by L A Walsh 23 Jan '19

23 Jan '19

On 1/21/2019 11:46 PM, Stefan Seyfried wrote: > > seife@seife:/dev/shm> wget > https://download.opensuse.org/repositories/openSUSE:/Factory/standard/x86_6… > --2019-01-22 08:42:14-- > https://download.opensuse.org/repositories/openSUSE:/Factory/standard/x86_6… > Resolving download.opensuse.org (download.opensuse.org) 195.135.221.134, 2620:113:80c0:8::13 > ---- How is factory standard different or similar to tumbleweed? Same? > > seife@seife:/dev/shm> rpm -qp --requires yast2-4.1.48-1.1.x86_64.rpm > /bin/bash > .... > rubygem(ruby:2.5.0:abstract_method) > rubygem(ruby:2.5.0:cfa) > rubygem(ruby:2.5.0:cheetah) > rubygem(ruby:2.5.0:simpleidn) > .... > yast2-xml > yast2-ycp-ui-bindings >= 3.2.0 > yui_backend > > > >> Were my details sufficient to make sense? I don't see where the >> ruby 2.1.0 part comes in/from either >> > > There is no ruby 2.1.0 requirement. > ---- `Your above build is *perfect*....at least now I know where the endposts are. Thanks much! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Only A Week and a Half left to Get Approved
by Fraser_Bell 23 Jan '19

23 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ About 1.5 weeks left to get your openSUSE Membership approved so you can vote in the openSUSE Board Elections. Here is the 3rd installment in the "Meet Your openSUSE Board Elections Candidates" series at openSUSE News. Meet Incumbent Sarah Julia Kriesch: <url>https://news.opensuse.org/2019/01/23/2018-2019-opensuse-board-elections-mee…</url> <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) openSUSE Member openSUSE Global Moderator openSUSE Contributor YaST Contributor aka Fraser_Bell on the Forums, OBS, IRC, and mail at openSUSE.org Fraser-Bell on Github -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Re: how to read requirement and get an rpm value? thanks!
by L A Walsh 22 Jan '19

22 Jan '19

(BTW, if you also reply directly to my email addr when composing an email in response to something I wrote, I am often likely to get it more quickly... thanks!) On 1/21/2019 5:50 AM, Arjen de Korte wrote: > > > Those sources are from 5 months ago. --- !! :-) !! Yes. However, even as I pointed out .... > If you're up-to-date on Tumbleweed, > https://download.opensuse.org/repositories/openSUSE:/Factory/standard/x86_6… > > Similar reqs as below are required for yast2-4.1.48. I.e. I still have: rubygem(ruby:2.1.0:abstract_method) which looks nothing like an rpm (Name-Version-Revision). That's my main sticking point whether I generate from 5 months ago or from 5 minutes ago, how do I interpret that req into an installable package? Thanks! Linda >> >>>> error: Failed build dependencies: >>>> rubygem(ruby:2.1.0:abstract_method) is needed by yast2-4.1.0-1.1.x86_64 >>>> rubygem(ruby:2.1.0:cfa) is needed by yast2-4.1.0-1.1.x86_64 >>>> rubygem(ruby:2.1.0:cheetah) is needed by yast2-4.1.0-1.1.x86_64 >>>> rubygem(ruby:2.1.0:rspec) is needed by yast2-4.1.0-1.1.x86_64 >>>> rubygem(ruby:2.1.0:simpleidn) is needed by yast2-4.1.0-1.1.x86_64 >>>> > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] 2nd installment in "Meet Your openSUSE Board Elections Candidates" series
by Fraser_Bell 22 Jan '19

22 Jan '19

IMPORTANT: DO NOT REPLY ON THIS LIST!!! IMPORTANT: DO NOT REPLY ON THIS LIST!!! Replies or comments should be made on the openSUSE Project Mailing List. ================ Less than 2 weeks left until Ballots open. Here is article #2 in the "Meet Your Candidates" series of articles are being published on openSUSE News. <url>https://news.opensuse.org/2019/01/22/21530/</url> <url>https://en.opensuse.org/openSUSE:Board_election</url> -- -Gerry Makaro openSUSE Board Elections Committee (election-officials **at** openSUSE.org) openSUSE Member openSUSE Global Moderator openSUSE Contributor YaST Contributor aka Fraser_Bell on the Forums, OBS, IRC, and mail at openSUSE.org Fraser-Bell on Github -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0