June 2017 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] Epson Scanner V500 Isn't Detected
by Mark Misulich 21 Jun '17

21 Jun '17

On Mon, 2017-06-19 at 12:17 +0200, Aaron Digulla wrote: > Am Sonntag, Juni 18, 2017 23:39 CEST, Mark Misulich <munguanaweza@gma > il.com> schrieb: > > > > There is a kernel/sane bug which breaks many USB scanners. Make sure > you have at least version 1.0.25 of SANE installed. I installed sane-backends version 1.0.27 from Sauerland OBS repository, but the scanner still isn't recognized in yast Scanner configuration window. Driver Scanner epkowa Epson (unknown model) at epkowah:usb001:004 Not Configured EPSON Scanner USB scanner (vendor=0x04b8 [EPSON], product=0x0130 [EPSON Scanner]) at libusb:001:004 > > From http://www.sane-project.org/ > The Linux USB3 workaround which was added in version 1.0.25 is now > disabled by default. If you have difficulty using a scanner which > previously worked, or intermittent scanner availability, try setting > the new environment variable SANE_USB_WORKAROUND=1 before starting > your frontend. I don't know where to do this, I will need more detailed instructions. > Use sane-find-scanner and "scan-image -L" on the command line to see > whether SANE can see the scanner. Here are the readouts: sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04b8 [EPSON], product=0x0130 [EPSON Scanner]) at libusb:001:004 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. scanimage -L device `epkowa:usb:001:004' is a Epson (unknown model) flatbed scanner -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 24

[opensuse] What has happened with mysql-community-server?
by Bjoern Voigt 20 Jun '17

20 Jun '17

The latest Thumbleweed upgrade replaced my mysql-community-server-5.6.36-2.2.x86_64 installation with mariadb. mysql-community-server is not available anymore in official Thumbleweed repositories. Why? zypper ref; zypper dup --no-allow-vendor-change [...] The following 6 NEW packages are going to be installed: kernel-default-4.11.6-4.4.ge566a4a libjemalloc2 libthrift-0_9_3 mariadb mariadb-client python2-atspi The following 6 packages are going to be REMOVED: kernel-default-4.11.6-4.3.ge566a4a libmysql56client18 mysql-community-server mysql-community-server-client mysql-community-server-errormessages python-atspi [...] It took my some time to downgrade mariadb to mysql-community-server. Personally I would like to see mysql-community-server in >= 5.7.18 version instead of MySQL 5.6. The compilation problems for MySQL 5.7.x on openSUSE are fixed with 5.7.18, but there is some packaging work to do. Who is interested? Some starting points: https://build.opensuse.org/package/show/server%3Adatabase/mysql-community-s… https://github.com/openSUSE/mysql-packaging Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] multiple kernels?
by George from the tribe 20 Jun '17

20 Jun '17

Is this a problem? I noticed this when I was running an update on my smaller laptop: ----------------------- # zypper up Loading repository data... Reading installed packages... The following 4 package updates will NOT be installed: audacity flac libFLAC++6 libFLAC8 The following 2 NEW packages are going to be installed: kernel-devel-4.4.70-18.9.1 kernel-source-4.4.70-18.9.1 ---------------------- I was thinking, I thought I had kernel 4.11 from the kernel:stable repo, as that is what I have been using on this laptop. So, I ran this: ---------------------- george@tribetrekDell:~> uname -r 4.11.3-1.g7262353-default george@tribetrekDell:~> rpm -q kernel-devel kernel-devel-4.7.6-1.1.gfb37fcc.noarch kernel-devel-4.7.5-3.1.ge3f5518.noarch kernel-devel-4.4.62-18.6.1.noarch kernel-devel-4.11.3-1.1.g7262353.noarch george@tribetrekDell:~> rpm -q kernel-default kernel-default-4.7.5-3.1.ge3f5518.x86_64 kernel-default-4.11.3-1.1.g7262353.x86_64 ---------------------- Sure enough, I am running kernel 4.11, but I have packages for multiple kernels installed, and the update packages that zypper is saying it is going to install are not even matching to the kernel I am using. Maybe this is contributing to why this system seems so unstable when I am running KDE? Any ideas on why these multiple kernel packages are installed, and possibly, how to fix? I assumed that when updates have been made in the past, the dependencies features should have removed old packages. I only use zypper up to update my system. -- George Box: 42.2 | KDE Plasma 5.8 | AMD Phenom IIX4 | 64 | 32GB Laptop #1: 42.2 | Gnome 3.20 | AMD FX 7TH GEN | 64 | 12GB Laptop #2: 42.2 | KDE Plasma 5.8 | Core i5 | 64 | 8GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 30

[opensuse] wget source from 2012 being used in leap? Security Alert!
by L A Walsh 20 Jun '17

20 Jun '17

I have wget 1.16 loaded in 13.2 and was wanting to get a later version and thought to look at leap 42.3. That is one of the more recent releases, no? Why would 42.3 have wget 1.14 in it from 2012?? Seems it would be missing even more security patches.... Latest wget version is 1.19. So what am I doing wrong? Isn't leap supposed to be for one of the newer releases? How could it be possible that a version prior to suse13.2 being released? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 11

[opensuse] kmail and akonadiserver:
by Constant Brouerius van Nidek 20 Jun '17

20 Jun '17

Seems that kmail starts behaving even better after the last three updates. But sending this email did not work from kmail. Do not know if and when it starts working. I can now delete emails without running into problems. Still my mail filter is not working properly with the incomming mail from three pop3 accounts. If I let the filter run in the automatic filter mode I get a lot of duplicates. Trying to remove dups does not work. Manualy filtering is the only solution folowed by akonadictl fsck/ vacuum/ restart. Looking into the akonadictl restart message I found following info which looks like an error message: org.kde.pim.akonadiserver: "Cannot connect to agent instance with identifier 'akonadi_maildir_resource_0', error message: ''" Could this be the culprit or should I look further? How is the general feeling about the overall health of kmail? -- opensuse:tumbleweed:20170615 Qt: 5.9.0 KDE Frameworks: 5.34.0 kf5-config: 1.0 KDE Plasma: 5.10.1 plasmashell 5.10.1 Kernel: 4.11.4-1-default Linux User 183145 working on a Pentium IV . -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Cups issue on zypper up
by ianseeks 20 Jun '17

20 Jun '17

Hi This seems regular occurrence for me with cups updates (see below) although it doesn't seem to affect it working. Does anyone know who needs to know about it? Regards Ian (48/48) Installing: cups-2.2.3-211.1.x86_64 ............................................................................................................ [done] Additional rpm output: Failed to try-restart cups-lpd@.service: Unit name cups-lpd@.service is missing the instance name. See system logs and 'systemctl status cups-lpd@.service' for details. # systemctl status cups-lpd@.service Failed to get properties: Unit name cups-lpd@.service is missing the instance name. -- opensuse:tumbleweed:20170617 Qt: 5.7.1 KDE Frameworks: 5.34.0 KDE Plasma: 5.10.1 kwin 5.10.1 kmail2 5.5.2 akonadiserver 5.5.2 Kernel: 4.11.5-1-default Nouveau: 1.0.15_1.2 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] can't mount/open/use usb drive/stick/disk device on leap 42.2
by Rejaine Monteiro 20 Jun '17

20 Jun '17

Hi list I can't mount/open/use usb drive/stick/removabledisk on leap 42.2 with common user .. only with root user. With a normal user using KDE desktop, it detects the pendrive, for example, but when trying to open in the file manager gives the error "you are not allowed to mount this device"or something like that. The use of external storage devices nowadays is something so basic, I can not understand why in this version this was blocked (in previous versions it worked perfectly well) Any tips? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 22

[opensuse] Cups broadcast
by Koenraad Lelong 20 Jun '17

20 Jun '17

Hi, I'm installing Leap 42.2 (laptop ran OS 13.2). All went smoothly. The only thing I can't get running is the printers. I have a server where my printers are defined (cups 1.7) and this broadcasts via mdns. Unfortunately, I'm unable to get the printer automagically configured on the new installation. Any reference documentation for cups ? TIA, Koenraad. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] File delete permissions.
by Carlos E. R. 19 Jun '17

19 Jun '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm user 'cer'. To avoid deleting by mistake some files, I changed their ownership to another user: cer@Isengard:~/Fusion/Videos/Crossing Jordan/Temporada 1> l p*mpeg - -rw-r--r-- 1 cer-g root 0 Jun 8 19:50 p.mpeg - -rw-r--r-- 1 cer-g root 0 Jun 8 19:50 p2.mpeg - -rw-r--r-- 1 cer-g root 0 Jun 8 19:50 p3.mpeg - -rw-r--r-- 1 cer-g root 0 Jun 8 19:50 p4.mpeg cer@Isengard:~/Fusion/Videos/Crossing Jordan/Temporada 1> rm p.mpeg rm: remove write-protected regular empty file 'p.mpeg'? n cer@Isengard:~/Fusion/Videos/Crossing Jordan/Temporada 1> See? 'rm' doubts and asks. However, 'mc' doesn't ask and goes ahead, it happily deletes a file that is not mine. I thought that the 'w' permission was needed to delete a file, but no. Is there some way I can negate user "cer" permission to delete a file? No, not sticky, it doesn't work. - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlk5kDcACgkQtTMYHG2NR9Vq1QCggsSKNnySeBs+qBDnrMJ2duOD KKYAn1Dj+vi6dWVFjKaS6iwNgolheymw =0zPI -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 26

[opensuse] mount a CIFS share - permission denied
by Mikhail Ramendik 19 Jun '17

19 Jun '17

Hello, My wi-fi router can share the contents of a USB device using FTP and Samba. I am trying to use this. Windows 7 has connected to the device flawlwssly when I gave it the right username and password. So I have also put a line into /etc/fstab: //192.168.1.254/usbuser /media/share cifs auto,uid=misha,gid=users,credentials=/etc/smbpassword 0 0 (all on one ine) /etc/smbpassword is user = usbuser password = the_right_password_that_works_with_windows and yet, I get an error 13 permission denied. dmesg has: [12913.915270] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [12913.915275] CIFS VFS: Send error in SessSetup = -13 [12913.915334] CIFS VFS: cifs_mount failed w/return code = -13 How do I get it to mount the share? Alternatively, can I use something else to mount the share using CIFS? Something GUI? I have used curlftpfs for now but I would like to know how to do samba. -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3