June 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] kvm pci passthrough not working
by mlus 10 Jun '17

10 Jun '17

I use kvm openSUSE-42.2 as host and debian(jessie) as guest. Host PC has 2 NIC, one for openSUSE and other for debian(pci passthrough). Intel Corporation 82541PI Gigabit Ethernet assign to openSUSE. Intel Corporation 82579LM Gigabit Network assign to debian. Until kernel update to 4.4.70-18.9-default , debian recognize 82579LM and use it. After update, debian fail ifup eth0. debian # lsmod | grep e1000e e1000e 220778 0 ptp 17692 1 e1000e debian # modprobe -rv e1000e rmmod e1000e rmmod ptp rmmod pps_core debian # modprobe -v e1000e insmod /lib/modules/3.16.0-4-amd64/kernel/drivers/pps/pps_core.ko [ 138.684256] pps_core: LinuxPPS API ver. 1 registered [ 138.685331] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> insmod /lib/modules/3.16.0-4-amd64/kernel/drivers/ptp/ptp.ko [ 138.688870] PTP clock support registered insmod /lib/modules/3.16.0-4-amd64/updates/drivers/net/ethernet/intel/e1000e/e1000e.ko [ 138.697285] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.5.3-NAPI [ 138.698337] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. debian # ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 eth0 not found debian# ip link set eth0 up Cannot find device "eth0" At first, I thought that 82579LM Hardware problem. Then I did these command from openSUSE console. # virsh shutdown debian # systemctl stop libvirtd.service openSUSE# modprobe -r vfio_iommu_type1 rmmod vfio_iommu_type1 openSUSE # modprobe -rv vfio_pci rmmod vfio_pci rmmod vfio rmmod vfio_virqfd openSUSE # modprobe e1000e And, start YaST, setup e1000e (eth1) IPaddress. Then 82579LM work well. I think this is new kernel problem. How can I use pci passthrou correctly ? Thak you. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Trying to get the crashlog of a program
by Carlos E. R. 09 Jun '17

09 Jun '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I use a third party (no source code) program that crashes, and I want to send the crash output to the developer, but I can't because it disappears. I use tmux, and I can not page up to see the screen output. And the output is not piped, either - perhaps I do it wrong. I do: LOG="/home/cer/Fusion/log/kodiserver_$HORA" ./Kodi_MovistarTV_Server.pvr -d:/home/cer/Fusion 2>&1 | tee $LOG I see the end of the backtrace, but the log file is empty: 7ffc177e7000-7ffc17808000 rw-p 00000000 00:00 0 [stack] │·································· 7ffc17886000-7ffc17889000 r--p 00000000 00:00 0 [vvar] │·································· 7ffc17889000-7ffc1788b000 r-xp 00000000 00:00 0 [vdso] │·································· ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] │·································· │·································· Se cayó, reiniciando en 10 segundos... │·································· │·································· Son las 2017-06-09T00:12:01+00:00; iniciando Kodi_MovistarTV_Server.pvr │·································· terminate called after throwing an instance of 'std::bad_alloc' │·································· what(): std::bad_alloc │·································· │·································· Se cayó, reiniciando en 10 segundos... │·································· Log /home/cer/Fusion/log/kodiserver_20170609-001201 de tamaño cero borrado What is happening there is that there is a backtrace, and the script starts the program again after ten seconds. The log has cero bytes, so I delete it, no info. I have also tried: ./Kodi_MovistarTV_Server.pvr -d:/home/cer/Fusion &> "$LOG" but it is the same, nothing is captured. Am I doing the pipe wrong? Or is it the program that is bypassing the pipes? Is there some other way to capture the output? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlk57BkACgkQtTMYHG2NR9WzbgCgiE+U52MdatG0gnAVAFLbrLIf kZgAoI56FTFrPE5xwGoqLkQRzWUD4/Ze =kSwK -----END PGP SIGNATURE-----

2 2

[opensuse] tablet as remote display
by Roger Oberholtzer 09 Jun '17

09 Jun '17

I am getting asked, more and more, about why we do not use a tablet as the 'display' in our measurement systems. WiFi issues and near-real-time measurement control issues aside ("but Roger, why does NetFlix work over WiFi?" ... sigh). So, here's my question to the list: if you had to set up a tablet to be a remote display (as opposed to having it run a native GUI app), what components might you choose. The machine that should have a tablet used this was will be running openSUSE with KDE as the desktop. The issues range from speed to responsiveness to not having a physical keyboard. If this is off-topic, I can move the discussion. But as the desktop that will be accessed is openSUSE, I thought it may be on topic. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 15

[opensuse] tmux question
by Carlos E. R. 09 Jun '17

09 Jun '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, In tmux it appears that I can not page up to see previous screen output. Is it possible to go back somehow? Or even better, dump all the text somewhere? Or, is it possible to tell it to log all output to a file? - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlk56NMACgkQtTMYHG2NR9Wp1gCeNzLXy4FeDe3aWdmCcfNFYv0k rh8An2x1Ph/QPUZG8P5b0oenkBnjKRS/ =bpya -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Hpet issues again
by John Andersen 09 Jun '17

09 Jun '17

This morning I opened the laptop lid to start work, and it was sooooooooo sloooooow it took 10 minutes to open a menu. Had to reboot. After reboot I used Journalctl to view the prior boot and noticed that there was a kernel oops just after resume, (nul pointer dereference at ~00001, followed by an abbreviated stack, and call trace etc. DWARF2 Unwinder stuck at some syscall-yada-fastpath And finally hpet increased min_delta_ns to 152745, which is higher than I've ever seen it set. I haven't had hpet issues on this machine for over 5 years. Opensuse 42.2, 4.4.62-18.6-default #1 SMP x86_64. Completely up to date. What would cause such a thing? -- After all is said and done, more is said than done. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] thunderbird spam filter
by jdd＠dodin.org 08 Jun '17

08 Jun '17

Hello :-) looks than since some days the Thunderbird spam filter do not works as before. usually the anti spam system moves mails to the "not wanted" ("Indésirables" in french) folder, mark then as spam (small flame) then as read. now the spam are still moved to the spam/not wanted folder, but here are not flagged/tagged as spam and are still tagged unread. It's not a bad idea to have then set "unread", because this allows quick review (and sometime allows fixing), it also allow marking allowed/not allowed to make filter better, but anyway it's curious do you notice the same thing? thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 47

[opensuse] /usr/share/themes/Adwaita/gtk-2.0/main.rc:728: error: unexpected identifier `direction', expected character `}'
by Carlos E. R. 07 Jun '17

07 Jun '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 /usr/share/themes/Adwaita/gtk-2.0/main.rc:728: error: unexpected identifier `direction', expected character `}' # LTR image { function = EXPANDER expander_style = COLLAPSED file = "assets/pan-right.png" direction = LTR <===== } - -- Cheers Carlos E. R. (from 42.2 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlk4Zx0ACgkQtTMYHG2NR9UMugCgjxqhsQSKNSADYYmuAlwGHBec XQ0An0tiafKxKC82GhVRgSVxUaLlmvL8 =Ex8c -----END PGP SIGNATURE-----

1 0

[opensuse] Samba Worm Alert!
by Lew Wolfgang 07 Jun '17

07 Jun '17

Hi Folks, It looks like samba has a remote-root-wormable vulnerability, present in all versions for the past seven years. https://arstechnica.com/security/2017/05/a-wormable-code-execution-bug-has-… Note that a work-around is setting this in /etc/samba/smb.conf: nt pipe support = no Then restart smbd. While the workaround is fine, what about all those routers and NAS boxes out there that will never get updated? Regards, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 11

[opensuse] 42.3 and packman
by jdd＠dodin.org 07 Jun '17

07 Jun '17

is there a repo from packman for 42.3 (alpha/beta) thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] repositories for leap 42.3 outdatet?
by Wilhelm Boltz 07 Jun '17

07 Jun '17

Hello, on a german mailing list there are discussions about openSUSE repositories to be outdatet. In fact the repo /distribution/leap/42.3-Current/iso/ does not show the current versions of both dvd and netinstall iso of leap 42.3. Shouldn't that be fixed? Greetings Wilhelm -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- openSUSE Tumbleweed 20170602 GNU/Linux 4.11.3-1-default x86_64 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1