May 2010 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Filezilla and multifuction printer
by Stan Goodman 25 May '10

25 May '10

I use a Brother MFC465cn multifunction printer for scanning, using the Filezilla scanning application. All worked well for several years since I bought the machine, until I sent my first fax message with the printer yesterday. Now an attempt to load Filezilla causes the error message: ***** Error during CMS conversion Could not open scanner ICM profile. ***** This sounds like the very act of sending a fax has concealed the internal scanning profile of the device. How can I find them again? And am I now doomed to having to go through reconstructing the scanner profile every time I send a fax? -- Stan Goodman Qiryat Tiv'on Israel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] Problem with acroread from konq/dolphin
by Anton Aylward 25 May '10

25 May '10

I have a problem starting acroread from both Konqueror and Dolphin when clicking on a PDF icon. Acroread starts up OK, but then I get a warning window saying Error launching /home/anton/.local/share/applications/acroread.desktop Either KLauncher is not running anymore, or it failed to start the application Well it started the application :-) So I click on OK for that modal dialogue box and ... Acroread starts up again with the same file! I close acroread and now there's another modal dialogue box saying KDEInit: could not launch /usr/bin/acroread I've googled around a but but not found why this nonsense is happening. I also ave Foxit and okular as alternatives This doesn't happen with them. Is there some bad exit code from acroread? -- Be extremely subtle, even to the point of formlessness. Be extremely mysterious, even to the point of soundlessness. Thereby you can be the director of the opponent's fate. Sun-tzu, The Art of War. Emptiness and Fullness -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] Hard Disk Light always on
by Bob Rea 25 May '10

25 May '10

after a while. What should I look for and where should I look? Top doesn't tell me anything that I can see. -- Bob Rea mailto:gapetard@stsams.org http://www.petard.us http://www.petard.us/blog http://www.petard.us/gallery Where is Bill Stringfellow now that we really need him? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

9 15

[opensuse] Suddenly mounting and NFS Kernel Server.
by Boyd Lynn Gerber 25 May '10

25 May '10

I am using the same exports file I have for 3 years. I made the mistake of trying the GUI to create a NFS installation source. I removed the only difference which was the last line it added. I copied the 3 year old file back to exports. All permissions are the same. It comes up in yast with every thing looking correct. Even the exportfs without options looks right. But I can not mount any of the exported HD's/Partitions. We had a car take out our electricity pole and all our systems ran aout of power. The only times the system is taken down or rebooted is when a new kernel is installed. I have ran out of ideas to try. Here is a message from trying to mount the drive. ecom4:~ # mount /MNT0 mount.nfs: mount system call failed I have several systems ounting the exported mounts. I did a diff as folllows # exportfs >> /tmp/exported-drives-n-partitions # diff /tmp/exported-drives-n-partitions /tmp1/exported-drives-n-partitions.01dec09 No differences. The export was made after a fresh installation of openSUSE 11.1 coping back the exports file. It has worked till yesterday when I booted the system after a 4 hour power outage. Prior to the boot everything was working. Where else could I find the problem? Thanks, -- Boyd Gerber <gerberb(a)zenez.com> 801 849-0213 ZENEZ 1042 East Fort Union #135, Midvale Utah 84047 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] rebuilding initrd?
by Leen de Braal 24 May '10

24 May '10

Hi all, Having a problem with a system that will not boot. Reason: mainboard broken and disks are now used on another mainboard, with probably another chipset. It contains a /dev/md0 as root-device, but when booting from the new mobo, md0 is not available. Booting with a rescue CD I can see the raid device /dev/md0 When I do these things after booting a rescue system, it seems to me that the system is the way I want it: ==================== mount /dev/md0 /mnt, mount /dev/sda1 /mnt/boot, mount -o bind /dev /mnt/dev mount -o bind /proc /mnt/proc mount -o bind /sys /mnt/sys chroot /mnt ==================== What command do I need to rebuild the initrd with the modules now loaded? In /etc/sysconfig/kernel to me it seems to have the modules for the old mobo? -- L. de Braal BraHa Systems NL - Terneuzen T +31 115 649333 F +31 115 649444 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 3

Re: [opensuse] IMAPS over IPv6
by James Knott 24 May '10

24 May '10

Theo van Werkhoven wrote: > Check to see if this ipam daemon is listening on the Global Link > address, not only on the Local Link. > > Theo > How do I do that? tnx -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 4

[opensuse] Reboot to Vista does not work
by Marc Chamberlin 24 May '10

24 May '10

Perhaps this should be a bug report, but I thought I would ask first... When I am rebooting via the KDE shutdown menu, and select Vista as my OS that I want to reboot to, it fails. The GRUB boot menu always comes up with my default openSuSE 11.2 selected, and if I am not watching it will automatically reboot back to openSuSE and not Vista, as I had selected... Have I mis-configured the boot somehow or is this a bug? Running under openSuSE11.2 and KDE 4.4.3 BTW FWIW That shutdown/reboot menu of KDE is a PITA. My normal tendency is to click on the down arrow and release the click button, expecting the menu of choices to pop open and STAY open.. Not mean simply reboot. Most menus will open and stay open when the menu pulldown button is clicked... If I want to simply reboot, clicking on the reboot button anywhere else, other than the pulldown arrow should suffice... IMHO that is... ;-) Marc..

8 9

[opensuse] IMAPS over IPv6
by James Knott 24 May '10

24 May '10

I've tried connecting to my mail server via IPv6. While it works fine when connecting from the computer the server is running on, I cannot connect from another computer via IPv6. It works fine using IPv4 from any computer. As I understand it, I may have to make a change in /etc/xinetd.d/imap, but I'm not sure exactly what. Any ideas? Changing flags = IPv4 to IPv6 does not appear to work. BTW, I'm using the WU imap server on OpenSUSE 11.0. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] [Fwd: Returned mail: see transcript for details]
by Marco Calistri 24 May '10

24 May '10

Hello, Is the Returned Mail Error I'am being annexing hereby related to some issue on opensuse maililing server? I start to see these transcripts errors from yesterday. Thanks! -- opensuse 11.2 - Linux 2.6.31.12-0.2-default x86_64 AMD Turion(tm) 64 Mobile Technology MK-36 - GeForce Go 6150 Gnome 2.28.2

4 3

[opensuse] UFO sighted in 11.0 filesystem root - have others experienced similar UFO sightings
by David C. Rankin 24 May '10

24 May '10

Guys, I sighted an Unidentified Filesystem Object in the filesystem root this evening and need to see if others have evidence of such a phenomena. The object in question is: 01:25 alchemy:~/suse/art> l / drwxr-xr-x 2 root root 4096 2010-03-30 09:56 .config/ 01:25 alchemy:~/suse/art> l /.config -rw-r--r-- 1 root root 278 2010-03-30 09:56 Trolltech.conf 01:25 alchemy:~/suse/art> cat /.config/Trolltech.conf [Qt%20Plugin%20Cache%204.6.false] usr\lib64\kde4\plugins\kauth\backend\kauth_backend_plugin.so=40602, 0, x86_64 linux g++-4 full-config, 2010-03-27T00:42:10 usr\lib64\kde4\plugins\kauth\helper\kauth_helper_plugin.so=40602, 0, x86_64 linux g++-4 full-config, 2010-03-27T00:42:11 (Why the DOS path separators?) Now I know what this object is, but the question outstanding is what could I have done to put this creature on my filesystem. What in the heck is a kde4 shared object from out qt buddies at Trolltech doing hanging off my filesystem root. It seems that this object has been abandoned by whatever dropped him off there: 01:41 alchemy:~/suse/art> rpm -q --whatprovides /.config file /.config is not owned by any package 01:41 alchemy:~/suse/art> rpm -q --whatprovides /.config/Trolltech.conf file /.config/Trolltech.conf is not owned by any package However, the culprit may be identified by what it still points to: 01:44 alchemy:~/suse/art> rpm -q --whatprovides /usr/lib64/kde4/plugins/kauth/backend/kauth_backend_plugin.so kdelibs4-core-4.4.3-255.1 01:44 alchemy:~/suse/art> rpm -q --whatprovides /usr/lib64/kde4/plugins/kauth/helper/kauth_helper_plugin.so kdelibs4-core-4.4.3-255.1 01:44 alchemy:~/suse/art> rpm -q kdelibs4-core kdelibs4-core-4.4.3-255.1 That looks bad. I wonder if now kde4 can't find what it is looking for due to nobody knowing part of a config is hanging off the root filesys.... Have others experienced such a UFO sighting in the past few weeks? Does anybody have any thoughts how the trolltech.conf got there? The 'user' config files in ~/.config/Trolltech.conf contain a lot more info than this one. If it was root's, why isn't it in /root? If it is some system-wide config, why isn't it in /etc? -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4