May 2006 - openSUSE Users - openSUSE Mailing Lists

Re: [SLE] new at wireless configuration
by Ricardo Rodríguez - XEN 01 Jun '06

01 Jun '06

>But that is exactly what you need to do, install the "windows" driver >using ndiswrapper for the linksys card to work. There are no native >drivers in 10.1 (nor 10.0). > >As root: > >ndiswrapper -i <driver>.inf (found on the CD) >ndiswrapper -m >modprobe ndiswrapper >ndiswrapper -l (should show the installed driver) > >I would also add ndiswrapper to the MODULES_LOADED_ON_BOOT="" line >in /etc/sysconfig/kernel to have the driver loaded during boot. > >-- >Ken Schneider >UNIX since 1989, linux since 1994, SuSE since 1998 It worked! Thanks. As stated in a previous message, the complete -i line is ndiswrapper -i LSTINDS.INF.Once I've added ndiswrapper to MODULES_LOAD_ON_BOOT, the power led greened at boot time. Now, the iwconfig output looks like this: -- citlali:~ # iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:off/any Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:10 dBm Sensitivity=0/3 RTS thr:4096 B Fragment thr:4096 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 sit0 no wireless extensions. citlali:~ # -- Thus I have added the network card by using YaST>Network Devices>Network Cards>Traditional Method with ifup>Add and choosing new Wireless PCMCIA card. After restarting the computer, power led is green at startup, but it seems that no wireless link is established. After adding the PCMCIA wireless card, the iwconfig output is not exactly the same: no access point is associated with wlan0, but a nichname appears -- citlali:~ # iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:off/any Nickname:"citlali" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Bit Rate=54 Mb/s Tx-Power:10 dBm Sensitivity=0/3 RTS thr=4096 B Fragment thr=4096 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 sit0 no wireless extensions. citlali:~ # -- Please, how could I debug/solve this issue? Once again, thanks for your help, Ricardo -- Ricardo Rodríguez XEN, Resources Management

4 3

YAST won't open in SUSE 10.1
by John Moore 01 Jun '06

01 Jun '06

5.30.2006 I have read all the email regarding problems with YAST. I have managed to update installing / using a command line utility which can update / add repositories. Unfortunately, I still cannot open YAST. Worked fine in 10.0. Upgraded to 10.1 and, it wouldn't open. As you know, YAST does a lot of things besides just package management so it would be cool if I could actually get into it. Sigh. Anyone have any ideas. Would be most grateful.

5 7

Re: [SLE] new at wireless configuration
by Ricardo Rodríguez - XEN 01 Jun '06

01 Jun '06

>>> Ken Schneider<suse-list2(a)bout-tyme.net> 31/5/2006 18:04 >>> >But that is exactly what you need to do, install the "windows" driver >using ndiswrapper for the linksys card to work. There are no native >drivers in 10.1 (nor 10.0). >As root: > >ndiswrapper -i <driver>.inf (found on the CD) >ndiswrapper -m >modprobe ndiswrapper >ndiswrapper -l (should show the installed driver) > >I would also add ndiswrapper to the MODULES_LOADED_ON_BOOT="" line >in /etc/sysconfig/kernel to have the driver loaded during boot. > >-- >Ken Schneider >UNIX since 1989, linux since 1994, SuSE since 1998 Thanks, Ken, As for the "windows" driver installation. I've download a driver's file listed in the wiki, ftp://ftp.linksys.com/pub/network/wpc54gv2_driver_utility_v2.02.zip. It includes two *.inf files. Once of them with "$Chicago$" in the Signature within [version]. I'm guessing this is the right one and that bcmwl5.sys is the right *.sys file. Once I've copied both files to the Linux box, I've done... ndiswrapper -i lsbcmnds.inf Both it seems that something gone wrong. Here some outputs... citlali:~/Desktop/linksys # ndiswrapper -l Installed drivers: lsbcmnds invalid driver! citlali:~/Desktop/linksys # ls bcmwl5.sys lsbcmnds.inf citlali:~/Desktop/linksys # ndiswrapper -i lsbcmnds.inf lsbcmnds is already installed. Use -e to remove it citlali:~/Desktop/linksys # ndiswrapper -e lsbcmnds.inf Driver lsbcmnds.inf is not installed.Use -l to list installed drivers citlali:~/Desktop/linksys # Pleae, what where am I wrong? Thanks!!! Best, Ricardo -- Ricardo Rodríguez XEN, Resources Management

3 2

kde upgrade
by Paul Kaplan 01 Jun '06

01 Jun '06

I'm trying to add sources to yast for upgrading 10.1 to kde 3.5.3. The online updater is disabled and Zen is not installed. FTP ftp.kde.org pub/kde/stable/3.5.3/SuSE/SUSE_Linux_10.1 So why is it taking foooooooorrrrrrrrevvvvvvvvvvvvvveeeeeeeeeeeeer to complete the configuration? TIA Paul

2 1

New 10.1 x86_64 install has NO usb connectivity
by Patrick Shanahan 01 Jun '06

01 Jun '06

After a fatal ten-year-old motherboard problem, I finally replaced my box with an athlon dual core x86_64 4200, GAK8N Ultra-SLI, 2 SATA drives, a lota memory and a large power supply. I am in heaven! But, I cannot access any usb device. Note: I had to unplug all usb devices during install as a stall would ensue when the pre-install finished detecting hardware and was probing for usb devices. With the usb devices removed the install was a piece of cake. Reattached the usb devices prior to the software update with not problem, but no access either. Point: Kubunto 6.06 live boots fine and has usb access. wahoo:/home/pat # l /proc/bus/usb/ total 0 dr-xr-xr-x 2 root root 0 2006-05-28 18:52 ./ dr-xr-xr-x 5 root root 0 2006-05-28 11:57 ../ wahoo:/home/pat # modprobe -l |grep -i usb /lib/modules/2.6.16.13-4-smp/kernel/sound/usb/snd-usb-lib.ko /lib/modules/2.6.16.13-4-smp/kernel/sound/usb/snd-usb-audio.ko /lib/modules/2.6.16.13-4-smp/kernel/sound/usb/usx2y/snd-usb-usx2y.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/storage/usb-storage.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/whiteheat.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/visor.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/usbserial.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/safe_serial.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/pl2303.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/option.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/omninet.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/navman.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/mct_u232.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/kobil_sct.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/kl5kusb105.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/ti_usb_3410_5052.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/keyspan.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/ir-usb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/ipw.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/ipaq.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/io_ti.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/keyspan_pda.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/hp4x.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/io_edgeport.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/ftdi_sio.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/empeg.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/garmin_gps.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/cypress_m8.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/digi_acceleport.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/cp2101.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/cyberjack.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/anydata.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/airprime.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/serial/belkin_sa.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/zd1201.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/zaurus.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/usbnet.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/rtl8150.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/rndis_host.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/plusb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/pegasus.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/net1080.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/kaweth.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/gl620a.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/cdc_subset.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/catc.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/asix.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/net/cdc_ether.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/mon/usbmon.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/uss720.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/usbled.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/usblcd.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/rio500.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/phidgetservo.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/phidgetkit.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/legousbtower.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/ldusb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/idmouse.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/emi62.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/emi26.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/cytherm.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/auerswald.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/misc/sisusbvga/sisusbvga.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/w9968cf.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/vicam.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/usbvideo.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/ultracam.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/stv680.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/sn9c102.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/ov511.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/konicawc.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/ibmcam.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/et61x251.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/dsbr100.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/dabusb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/se401.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/media/pwc/pwc.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/yealink.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/xpad.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/wacom.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/usbhid.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/touchkitusb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/powermate.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/mtouchusb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/kbtab.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/itmtouch.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/ati_remote2.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/ati_remote.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/keyspan_remote.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/aiptek.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/acecad.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/input/appletouch.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/image/microtek.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/image/mdc800.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/host/uhci-hcd.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/host/sl811_cs.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/host/ohci-hcd.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/host/sl811-hcd.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/host/ehci-hcd.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/host/isp116x-hcd.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/core/usbcore.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/class/usblp.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/usb/class/cdc-acm.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/net/irda/irda-usb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/video/cpia_usb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/ttusb-dec/ttusbdecfe.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/ttusb-dec/ttusb_dec.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-vp7045.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-vp702x.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-umt-010.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dtt200u.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-digitv.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-common.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-a800.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/dvb-usb/dvb-usb-cxusb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/media/dvb/b2c2/b2c2-flexcop-usb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/isdn/hisax/hfc_usb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/char/watchdog/pcwd_usb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/bluetooth/hci_usb.ko /lib/modules/2.6.16.13-4-smp/kernel/drivers/bluetooth/bfusb.ko I have not compared modprobe with the kubunto live system. What am I missing? thanks, -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2

3 9

Re: [SLE] new at wireless configuration
by Ricardo Rodríguez - XEN 31 May '06

31 May '06

-- Ricardo Rodríguez XEN, Resources Management >>> Ed Harrison<eharrison(a)tampabay.rr.com> 31/5/2006 20:35 >>> ** Reply to message from Ricardo Rodríguez - XEN <rrodriguez(a)xen.net> on Wed, 31 May 2006 18:48:59 +0200 > Pleae, what where am I wrong? Thanks!!! > > Best, > > Ricardo >>I think that is not the driver, but an install info file for a utility. Try ndiswrapper -i bcmwl5 in the directory where the .inf and .sys >>files are located. >> >>Ed Harrison, Linux User # 199533 >>SuSE10.0, Kernel 2.6.15 >>PolarBar Mailer 1.26 Hi, Ed, I've tried what you proposed to no avail. This is the content of the driver's folder: citlali:~/Desktop/linksys # dir total 1812 -rw-r--r-- 1 root root 115 Jun 1 00:35 AUTORUN.INF -rw-r--r-- 1 root root 76268 Jun 1 00:35 Fw1130.bin -rw-r--r-- 1 root root 83024 Jun 1 00:35 FwRad16.bin -rw-r--r-- 1 root root 84644 Jun 1 00:35 FwRad17.bin -rw-r--r-- 1 root root 9339 Jun 1 00:35 LSTINDS.INF -rw-r--r-- 1 root root 9139 Jun 1 00:35 LSTINDS.cat -rw-r--r-- 1 root root 423561 Jun 1 00:36 Lstinds4.sys -rw-r--r-- 1 root root 28672 Jun 1 00:36 SETUP.EXE -rw-r--r-- 1 root root 265728 Jun 1 00:36 bcmwl5.sys -rw-r--r-- 1 root root 8008 Jun 1 00:36 lsbcmnds.cat -rw-r--r-- 1 root root 9846 Jun 1 00:36 lsbcmnds.inf -rw-r--r-- 1 root root 7208 Jun 1 00:36 radio16.bin -rw-r--r-- 1 root root 8984 Jun 1 00:36 radio17.bin -rw-r--r-- 1 root root 423561 Jun 1 00:37 tnet1130.sys -rw-r--r-- 1 root root 385536 Jun 1 00:37 tnet1130x.sys Whatever *.sys driver in a ndiswrapper -i command, ndiswrapper -l always list an invalid driver. The same is truth with lsbcmnds.inf. It was LSTINDS.INF what did the trick! -- citlali:~/Desktop/linksys # modprobe ndiswrapper citlali:~/Desktop/linksys # ndiswrapper -l Installed drivers: lstinds driver installed, hardware present citlali:~/Desktop/linksys # -- The power led is green now. I'm guessing I've now the adapter installed and I've to use some utility to access the wireless network. I will keep this thread updated and let you know, and eventually the wiki entry, with results. Thank you so much for your help, Ricardo

1 0

hi
by lorenzovaleri＠libero.it 31 May '06

31 May '06

please removed my address from the mailing list, me arrives messages without scope fills up me case email uselessly

6 6

Ciao! (Was: Re: [SLE] hi )
by Kai Ponte 31 May '06

31 May '06

> On Wednesday 31 May 2006 15:05, Rolf-Dieter Damm wrote: > > How about > > list-unsubscribe: > > <mailto:suse-linux-e-unsubscribe-lorenzovaleri=libero.it@suse.com> ? > > He's been told how to unsubscribe at least five times now. This has been going > on for three or four days. Every post is the same. Maybe he doesn't read > English? Anybody speak/write Italian? Ferrarri! Lamborghini! In fact, I had Italian for lunch today. Does that count? -- k

2 1

After upgrade to 10.1 sound does not work (snd-atiixp)
by Andre Truter 31 May '06

31 May '06

After upgrading my HP nx6125 notebook from SUSE 10.0 to 10.1 (x86_64), the sound module fails. The sound card is an ATI IXP SB400 AC'97. This used to work under SUSE 10.0. Now, when I try to configure the card, YaST (and alsaconf) tries to load the snd-atiixp module, but YaST always return an error, no matter which options I try. When it tries to configure the card, the following message appears in the messages file: ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 209 I googled, but did not find aything useful Any ideas how to get the sound working again? Thanks -- Andre Truter | Software Consultant | Registered Linux user #185282 Jabber: andre_tux(a)jabberafrica.org | http://www.trusoft.co.za ~ A dinosaur is a salamander designed to Mil Spec ~

1 0

Ripping CDs
by Rob Wright 31 May '06

31 May '06

Greetings, I did a fresh install of 10.1 last week. Today I'm trying to rip a CD using KAudiocreator and it's not working out too well. I get the disc inserted and the KAudiocreator started up, the CDDB lookup goes ok. I select the tracks to rip, then choose the OggEnc and get the following error: Could not start process Unable to create io-slave: klauncher said: Error loading 'kio_audiocd'. I found a suggestion online to install kmultemedia-kio-plugins, which I'm not finding in the SuSE repos anywhere. I've installed everything else off the install CD's that references kmultimedia, but still no luck. I am able to play CD's using amaroK. What am I missing, or should I be looking at? Thanks, Rob Wright

2 1