January 2004 - openSUSE Users - openSUSE Mailing Lists

? ksymoops usage for suse 9.0 installation oops
by Philippe De Muyter 29 Jan '04

29 Jan '04

Hello all, I am trying to install suse 9.0 and I get oops during installation. How can I run ksymoops on the oops report ? Thanks in advance Philippe De Muyter phdm at macqel dot be Tel +32 27029044 Macq Electronique SA rue de l'Aeronef 2 B-1140 Bruxelles Fax +32 27029077

1 0

Dual boot, and reformatting existing partitions from FAT32 to NTFS
by Basil Chupin 29 Jan '04

29 Jan '04

I am dual booting. I have 2 HDs (hda and hdc) with 1 partition on hda formatted as NTFS with the rest (except for Linux) as FAT32, On hdc I have a Reiserfs partition (data1) with the rest as FAT32. I now want to reformat at least 3 partions (say 2 on hda and 1 on hdc) as NTFS. If I altered fstab to reflect the partitions I want to reformat as NTFS file system BEFORE I exited Suse and then formatted them as NTFS would I have a problem in having them correctly recognised when I booted back into Suse? Or would I need to do a pretend run of the partitioner after booting into Suse and read-in the partition table in case the beginning/ending sectors are altered by the reformatting? Cheers. -- All Scottish food is based on a dare.

3 6

apache and dns
by suse82 29 Jan '04

29 Jan '04

dear all, i have setup dns server and apache (suse 8.2). dns is working fine. i create an index.html file for my apache. and it's working fine too for local computer. when accessed from outside (by typing www.domainname.com) it wouldn't open my index.html file, but it always open index.html.en (default index file). if i trying open by typing computername.domainname.com, it can open my index.html file. i check the dns, and everything is working fine. what caused m problem and how to solved this ? rgds, suse82

2 1

Integrated Wireless: More
by C Hamel 29 Jan '04

29 Jan '04

I have a generic question: I executed the 'lspci -v' command and received the following output. I am wondering if this indicates that the card is, indeed supported and if so, why does it report not being configured & why can I not enable it!? 00:09.0 Network controller: Broadcom Corporation BCM94306 802.11g (rev 02) Subsystem: Compaq Computer Corporation: Unknown device 00e7 Flags: fast devsel, IRQ 10 Memory at d0002000 (32-bit, non-prefetchable) [disabled] [size=8K] Capabilities: [40] Power Management version 2 Thanks... ...CH

2 1

Hylafax and Dialing In
by Chris Roubekas 29 Jan '04

29 Jan '04

Dear all, I have a computer setup with SuSE 8.1 and I have also setup Hylafax. The machine operates as a fax server for a long time now. I was wondering if it is possible to create a dialin service on the same modem as well? Currently Hylafax is using the only modem installed on the system. Can this be done? I have never done something like this so any help would be a big plus!!!! Thank you all! Chris

6 6

Blank vncViewer Window when vncServer is run at boot time with inetd
by R. S. Patil 29 Jan '04

29 Jan '04

dear friends, I am Using Suse 8.2 & Real VNC 4 vnc-4.0-0b4.i386.rpm As per guide line given by Mr. Jerry Westrick at http://faq.gotomyvnc.com/cgi-bin/jerry@westrick.com and additional reference "Setting up VNC on Linux" By Jeff Vincent I tried following. When I try to connect from a Win XP machine using Viewer I get a Blank Window with "X11" in the caption. The windows has a X shaped cursor which I am able to move mouse. I am not able to get Login prompt or normal GUI login window. with vncviewer I tried 192.168.10.1:50/51/52/60/61/62 with all same result. Please Note that if I undo all the changes and get back GUI at Console logged in as a user, run vncserver at shell prompt and try to connect from same xp machine I am able to get kde desktop in vncviewer of-course I have modified .vnc/xstartup file and added "startkde &" at end. This setting is common in both setups. in later case also I am not able to get login prompt but I feel its normal. Can Somebody help me in this Regard. Thanks. Best Regards R. S. Patil ================ Details Are As Follows ================ 1)-------------------------------------------------------------------------- edited /etc/services and at end added vnc640x8 5950/tcp # Small vnc800x8 5951/tcp # Medium vnc1024x8 5952/tcp # Large vnc640x16 5960/tcp # Small vnc800x16 5961/tcp # Medium vnc1024x16 5962/tcp # Large 2)-------------------------------------------------------------------------- edited /etc/inetd.conf and added at end (each line is broken for e-mail purpose) vnc640x8 stream tcp nowait nobody /usr/bin/Xvnc :50 -inetd -once -query localhost -geometry 640x480 -depth 8 securitytypes=none vnc800x8 stream tcp nowait nobody /usr/bin/Xvnc :51 -inetd -once -query localhost -geometry 800x600 -depth 8 passwordFile=/home/rsp/.vnc/passwd vnc1024x8 stream tcp nowait nobody /usr/bin/Xvnc :52 -inetd -once -query localhost -geometry 1024x768 -depth 8 passwordFile=/home/rsp/.vnc/passwd vnc640x16 stream tcp nowait nobody /usr/bin/Xvnc :60 -inetd -once -query localhost -geometry 640x480 -depth 16 passwordFile=/home/rsp/.vnc/passwd vnc800x16 stream tcp nowait nobody /usr/bin/Xvnc :61 -inetd -once -query localhost -geometry 800x600 -depth 16 passwordFile=/home/rsp/.vnc/passwd vnc1024x16 stream tcp nowait nobody /usr/bin/Xvnc :62 -inetd -once -query localhost -geometry 1024x768 -depth 16 passwordFile=/home/rsp/.vnc/passwd # End. 3)-------------------------------------------------------------------------- Created a new file called vncserver in /etc/xinetd.d (additional work than suggested but gave me result of atleast connecting) service vnc640x8 { socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = :50 -inetd -query localhost -once -geometry 640x480 -depth 8 securitytypes=none } service vnc800x8 { socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = :51 -inetd -query localhost -once -geometry 800x600 -depth 8 securitytypes=none } service vnc1024x8 { socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = :52 -inetd -query localhost -once -geometry 1024x768 -depth 8 securitytypes=none } service vnc640x16 { socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = :60 -inetd -query localhost -once -geometry 640x480 -depth 16 securitytypes=none } service vnc800x16 { socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = :61 -inetd -query localhost -once -geometry 800x600 -depth 16 securitytypes=none } service vnc1024x16 { socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = :62 -inetd -query localhost -once -geometry 1024x768 -depth 16 securitytypes=none } 4)-------------------------------------------------------------------------- In Yast2-.>System->Sysconfig Editor changed DISPLAYMANAGER_REMOTE_ACCESS to yes changed DISPLAYMANAGER_STARTS_XSERVER to no changed KDM_SHUTDOWN to root changed KDM_GREETSTRING to "welcome To VNC Server" then saved the changes 5)-------------------------------------------------------------------------- Edited /etc/X11/xdm/xdm-config commented "! DisplayManager.requestPort: 0" edited /etc/X11/xdm/Xaccess uncommented * #any host can get a login window Edited /opt/kde3/share/config/kdm/kdmrc and uncommented following lines in [Xdmcp] section # Whether KDM should listen to XDMCP requests. Default is true. Enable=true # The UDP port KDM should listen on for XDMCP requests. Don't change the 177. Port=17 Rebooted the system 6)-------------------------------------------------------------------------- 1) I am able to Ping the Linux Box. 2) I can Telnet Linux Box and Run Commands 3) lsof Command Gives Following Command # lsof -i -n -P | grep -v 127.0.0.1 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME portmap 656 bin 3u IPv4 1204 UDP *:111 portmap 656 bin 4u IPv4 1294 TCP *:111 (LISTEN) nmbd 703 root 6u IPv4 1306 UDP *:137 nmbd 703 root 7u IPv4 1307 UDP *:138 nmbd 703 root 8u IPv4 1309 UDP 192.168.10.1:137 nmbd 703 root 9u IPv4 1310 UDP 192.168.10.1:138 ibserver 730 root 0u IPv4 1580 TCP *:3050 (LISTEN) ibserver 781 root 0u IPv4 1580 TCP *:3050 (LISTEN) sshd 831 root 3u IPv6 1625 TCP *:22 (LISTEN) xinetd 1096 root 5u IPv4 3555 TCP *:901 (LISTEN) xinetd 1096 root 8u IPv4 3558 TCP *:9098 (LISTEN) xinetd 1096 root 9u IPv4 3559 TCP *:23 (LISTEN) *************** It seems Xvnc is Running *************** xinetd 1096 root 10u IPv4 3560 TCP *:5950 (LISTEN) xinetd 1096 root 11u IPv4 3561 TCP *:5951 (LISTEN) xinetd 1096 root 12u IPv4 3562 TCP *:5952 (LISTEN) xinetd 1096 root 13u IPv4 3563 TCP *:5960 (LISTEN) xinetd 1096 root 14u IPv4 3564 TCP *:5961 (LISTEN) xinetd 1096 root 15u IPv4 3565 TCP *:5962 (LISTEN) *************** It seems Xvnc is Running *************** xinetd 1096 root 16u IPv4 3566 TCP *:21 (LISTEN) smbd 1097 root 9u IPv4 3548 TCP *:139 (LISTEN) httpd 1130 root 16u IPv4 4441 TCP *:80 (LISTEN) httpd 1149 wwwrun 16u IPv4 4441 TCP *:80 (LISTEN) in.telnet 1229 root 0u IPv4 11340 TCP 192.168.10.1:23->192.168.10.248:1625 (ESTABLISHED) in.telnet 1229 root 1u IPv4 11340 TCP 192.168.10.1:23->192.168.10.248:1625 (ESTABLISHED) in.telnet 1229 root 2u IPv4 11340 TCP 192.168.10.1:23->192.168.10.248:1625 (ESTABLISHED)

1 0

AC-Link Operational, but...
by C Hamel 29 Jan '04

29 Jan '04

I am getting more strange output from the kernel when trying to connect. The linmodem *is* connecting but not getting much farther than that, unfortunately. Hoping someone can help me decipher this output: Jan 28 21:36:03 HP-YOGI pppd[11659]: Plugin passwordfd.so loaded. Jan 28 21:36:03 HP-YOGI pppd[11659]: pppd 2.4.1 started by root, uid 0 Jan 28 21:36:39 HP-YOGI pppd[11659]: Serial connection established. Jan 28 21:36:39 HP-YOGI pppd[11659]: Using interface ppp0 Jan 28 21:36:39 HP-YOGI pppd[11659]: Connect: ppp0 <--> /dev/ttySHSF0 Jan 28 21:38:40 HP-YOGI pppd[11659]: LCP: timeout sending Config-Requests Jan 28 21:38:40 HP-YOGI pppd[11659]: Connection terminated. Jan 28 21:38:40 HP-YOGI pppd[11659]: Receive serial link is not 8-bit clean: Jan 28 21:38:40 HP-YOGI pppd[11659]: Problem: all had bit 7 set to 0 Jan 28 21:38:41 HP-YOGI pppd[11659]: Hangup (SIGHUP) Jan 28 21:38:41 HP-YOGI pppd[11659]: Exit. Thanks... ...CH

1 0

install problem
by George H. Griffin 29 Jan '04

29 Jan '04

I have successfully installed Mozilla 1.6 via rpm and am trying to upgrade to Galeon 1.3.12 to go with it. Since I couldn't find rpms for the Galeon I decided to make it from source. I finally got a successful make after tracking down some missing packages and installing them. However, when I tried to install Galeon using "checkinstall" I got the following error messages: ... done if test "figures"; then \ /bin/sh ../../mkinstalldirs /usr/local/share/gnome/help/galeon/C/figures; \ for file in ./figures/*.png; do \ basefile=`echo $file | sed -e 's,^.*/,,'`; \ /usr/bin/install -c -m 644 $file /usr/local/share/gnome/help/galeon/C/figures/$basefile; \ done \ fi mkdir -p -- /usr/local/share/gnome/help/galeon/C/figures make install-data-hook make[4]: Entering directory `/home/ggriffin/installed/galeon-1.3.12/doc/C' /bin/sh ../../mkinstalldirs /usr/local/share/omf/galeon mkdir -p -- /usr/local/share/omf/galeon for file in galeon-C.omf; do \ /usr/bin/install -c -m 644 $file.out /usr/local/share/omf/galeon/$file; \ done /usr/bin/install: cannot stat `galeon-C.omf.out': No such file or directory make[4]: *** [install-data-hook-omf] Error 1 make[4]: Leaving directory `/home/ggriffin/installed/galeon-1.3.12/doc/C' make[3]: *** [install-data-am] Error 2 make[3]: Leaving directory `/home/ggriffin/installed/galeon-1.3.12/doc/C' make[2]: *** [install-am] Error 2 make[2]: Leaving directory `/home/ggriffin/installed/galeon-1.3.12/doc/C' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/ggriffin/installed/galeon-1.3.12/doc' make: *** [install-recursive] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. I've checked and the file galeon-C.omf exists in ~/installed/galeon-1.3.12/doc/C and the directory /usr/local/share/omf/galeon also exists. I don't know enough to know where to look next for the source of the problem, any suggestions will be welcomed. Thanks, George -- George H. Griffin Powered by SuSE Linux 9.0, kernel 2.4.21 "Some mornings it just doesn't seem worth it to gnaw through the leather straps" Emo Philips

2 2

jdsl / noip and /var/log/messages
by Rikard Johnels 29 Jan '04

29 Jan '04

Hi! I run jdsl to keep my ADSL line up, and noip to refresh my dynamic IP for public DNS. But i get a note in /var/log/messages every 10 minutes. -- snip -- Jan 29 03:20:33 wall dhcpcd[13789]: sending DHCP_REQUEST for 213.66.182.228 to 10.0.113.1 Jan 29 03:20:33 wall dhcpcd[13789]: DHCP_ACK received from (10.0.113.1) Jan 29 03:23:11 wall noip[106]: ! LIA = 213.66.182.228, IP = 213.66.182.228 Jan 29 03:30:33 wall dhcpcd[13789]: sending DHCP_REQUEST for 213.66.182.228 to 10.0.113.1 Jan 29 03:30:33 wall dhcpcd[13789]: DHCP_ACK received from (10.0.113.1) Jan 29 03:33:11 wall noip[106]: ! LIA = 213.66.182.228, IP = 213.66.182.228 How can i supress those entries? -- /Rikard ------------------------------------------------------------------------------------ Rikard Johnels email : rikjoh(a)norweb.se Web : http://www.rikjoh.com Mob : +46 (0)735 05 51 01 ------------------------ Public PGP fingerprint ---------------------------- < 15 28 DF 78 67 98 B2 16 1F D3 FD C5 59 D4 B6 78 46 1C EE 56 >

1 0

Re: [SLE] Re: Cannot Logon to Gnome After Upgrade
by GarUlbricht7＠netscape.net 29 Jan '04

29 Jan '04

Donald D Henson <wepin(a)wepin.com> wrote: > >On Sun, 2004-01-25 at 17:10, Joe Morris (NTM) wrote: >> On 01/26/2004 01:40 AM, Donald Henson wrote: >> >> >On Sun, 2004-01-25 at 07:05, Donald Henson wrote: >> > >> >> I just finished using Synaptic to upgrade a bunch of Gnome stuff, >> >> -----<text snipped>---- >> >> Did you run ldconfig AND SuSEconfig after the update ??? >> >> This needs to be done after closing Synaptic, >> since it locks the rpm database. >> >> You could do it from the console. >> >> -- >> Joe Morris > > No. In fact I got myself in such deep trouble > that I couldn't log into either gui. > I eventually reinstalled everything from scratch. > > But thanks for the suggestion anyway. > Don Henson > Don, I am puzzled by your comment: "I couldn't log into either gui" So what, I think what Joe was suggesting was you go to a Virtual Terminal, such as: "Ctrl-Alt-F1" Yes, this a "Console", but doesn't require that you be able to log into either the Gnome or KDE gui. (In fact you can get there from boot.) Whatever, log in as root (by giving the root passwoard) Then do "init 3" (login again if necessary, as root) Then do: "SuSEconfig --verbose" Then do: "ldconfig -v" do: "sync" Then for the fun of it do again: "SuSEconfig" (It should run real fast the second time.) Now do: "init 5" (Don't forget to comback and close the virtual term, Ctrl-Alt-F1, with a enter, then with a "ctrl + d" enter) Or if he didn't --- I would suggest it. By going to run level 3 (init 3), you are under "KDE" and "Gnone". and running the "boot scripts" What I am sugesting is a "belt and suspenders" approach, and some may LOL for doing "SuSEcong twice". but it's like whisling as you walk past a graveyard, it can't hurt. and it has the advantage tht is usually works for me, even when I got myself in "deep trouble." Hope this helps, Gar -- In the Beginning was the Command Line ---Neal Stephenson -- __________________________________________________________________ New! Unlimited Netscape Internet Service. Only $9.95 a month -- Sign up today at http://isp.netscape.com/register Act now to get a personalized email address! Netscape. Just the Net You Need.

1 0