February 1998 - openSUSE Users - openSUSE Mailing Lists

Re: [S.u.S.E. Linux] IDE in SB AWE 32 PnP
by zentara＠mindspring.com 21 Feb '98

21 Feb '98

> José Valerdi Tormo wrote: > > Hello, I try configure in Linux the IDE interface of my SB AWE 32 PnP. > Anybody knows which driver I have to use it or how I can configure it. > > Thanks. Hi, the AWE32 pnp will work under Suse if you just set up the pnp in boot.local. You need a line in /etc/rc.d/boot.local as follows: "isapnp isapnp.conf". The isapnp.conf should be in /etc It needs to be specially handled for the AWE32. Below is a copy of mine which you can paste in. ############################################################################################ #/etc/isapnp.conf (READPORT 0x0203) (ISOLATE) (IDENTIFY *) (CONFIGURE CTL0044/826647 (LD 0 (INT 0 (IRQ 7 (MODE +E))) (DMA 0 (CHANNEL 1)) (DMA 1 (CHANNEL 5)) (IO 0 (BASE 0x0220)) (IO 1 (BASE 0x0330)) (IO 2 (BASE 0x0388)) (ACT Y) )) ################################################################################# (CONFIGURE CTL0044/826647 (LD 2 # ANSI string -->WaveTable<-- (IO 0 (BASE 0x0620)) (IO 1 (BASE 0x0A20)) (IO 2 (BASE 0x0E20)) (ACT Y) )) ########################################################################################## (CONFIGURE CTL0044/826647 (LD 3 # Compatible device id PNPb02f # ANSI string -->Game<-- (IO 0 (BASE 0x0200)) (ACT Y) )) ########################################################################################## #(CONFIGURE CTL0044/826647 (LD 4 # ANSI string -->StereoEnhance<-- #(IO 0 (BASE 0x0100)) #(ACT Y) #)) ######################################################################### After you get the pnp setup, you can do a "insmod sound" as root, or if you have "kerneld" running, it will load the sound module automatically. To check if it's running do a "cat /dev/sndstat" Full info on Awe32's under linux can be found at <A HREF="http://bahamut.mm.t.u-tokyo.ac.jp/~iwai/awedrv/index-.html"><A HREF="http://bahamut.mm.t.u-tokyo.ac.jp/~iwai/awedrv/index-.html</A">http://bahamut.mm.t.u-tokyo.ac.jp/~iwai/awedrv/index-.html</A</A>> SuSe runs the card really well after pnp is setup. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Accel X4.0
by rknebel＠csrlink.net 21 Feb '98

21 Feb '98

Hi, I just stated using suse and cannot get my Accel X4.0 to install off of my cdrom. Whenever I type ./Install I get permission denied. I even tried putting an sh in front of it. Anyone using Accel 4.0 on suse 5.1? Thanks Alot -- Rick Knebel rknebel(a)csrlink.net -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] mutt launching web browser
by mperry＠basin.com 21 Feb '98

21 Feb '98

On Sat, Feb 21, 1998 at 02:17:29PM -0500, wtopa(a)ix.netcom.com wrote: > > depends on what version of mutt, Michael. .89 & up, no longer support > that function. > > bind pager \Cb previous-page # was "browse-url" > # bind pager ,B browse-url # compensate for \Cb > > #set url_regexp="((ftp|http)://|mailto:)[^ ]*[^., \n\t>\"]" > set web_browser=url_handler.sh # program to use when viewing URLs > > These are all I can find in the old .muttrc. > > HTH > wayne > Definitely does not work in the 89 release. rats. This was kinda like the line I had from an earlier version. I also had a simpler one that did not launch a shell script. Have to look around a bit more. Thanks. -- --Michael Perry-- mperry(a)basin.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Re: Keyboard lockup vs stty sane
by hatridge＠straubing.baynet.de 21 Feb '98

21 Feb '98

Hi Claes, Wildman, etc, On Sat, 21 Feb 1998, Claes G Lindblad wrote: > Hi Jim, Wildman & all, > > On Fri, 20 Feb 1998, The Wildman wrote: > > Now _I_ have a question for you: > > How can you switch terms if the keyboard is locked? > > You have a very good point there, Wildman! :-) Yes, he does. I guess that I should have said that the program lock up. Or at least I get to a point that I don't know what to do and the program will not respond. Normally at that point I do a "c-z" to put the program in the background and then I do a "kill 0". This will works most times, but about 100f the time I've got it so screwed up that all that will work is the change tty keys. All other keys seem to be dead. This was what I was meaning. So after reading this do you still think that doing "ps -a / kill <pid>" is the best thing or is there something better? > > > ... Just enter stty sane and you should be fine. > > Unfortunately, that seems not to be sufficient in Europe, > where characters above 0x7f are used, too. For this reason, > there is a tougher sanity enforcement: > /usr/bin/reset > which, among other things perform an 'stty sane'. > > So, if 'stty sane' will not bring your sanity back, > try 'reset'. > > Have fun! > Claes in Lund, Sweden. > -- www.algonet.se/~claesg -- > Thanks for all your help! JIM -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] mutt launching web browser
by wtopa＠ix.netcom.com 21 Feb '98

21 Feb '98

Subject: [S.u.S.E. Linux] mutt launching web browser Date: Sat, Feb 21, 1998 at 10:00:27AM -0800 In reply to:Michael Perry Quoting Michael Perry(mperry(a)basin.com): > > > Hi all- > > I used to have the config line in mutt to launch urls and somewhow have > lost that precious bit of information. > > Can someone help? depends on what version of mutt, Michael. .89 & up, no longer support that function. bind pager \Cb previous-page # was "browse-url" # bind pager ,B browse-url # compensate for \Cb #set url_regexp="((ftp|http)://|mailto:)[^ ]*[^., \n\t>\"]" set web_browser=url_handler.sh # program to use when viewing URLs These are all I can find in the old .muttrc. HTH wayne This is all I can find in the OLD .muttrc > -- > > --Michael Perry-- > mperry(a)basin.com > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e > > . -- "I do not fear computers. I fear the lack of them." -- Isaac Asimov _______________________________________________________ Wayne T. Topa <wtopa(a)ix.netcom.com> -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] Preserving system changes from YaST
by gecko＠freecar.com 21 Feb '98

21 Feb '98

I think the better question is what does yast use to configure the system. Yast uses SuSEconfig to read the rc.config file. See if you can set the changes you want in rc.config file or the permission.easy file. Those are the files that y ast uses to configure the system (are there more?) On 21-Feb-98 Ted Harding wrote: >The question this time concerns how to preserve manual changes made to system >setup from being re-set by YaST. > ---------------------------------- E-Mail: Darren <gecko(a)freecar.com> Date: 21-Feb-98 Time: 10:05:52 This message was sent by XFMail ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] IDE in SB AWE 32 PnP
by jovator＠arrakis.es 21 Feb '98

21 Feb '98

This is a multi-part message in MIME format. ------=_NextPart_000_000B_01BD3EFA.5A9E1EA0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, I try configure in Linux the IDE interface of my SB AWE 32 PnP. = Anybody knows which driver I have to use it or how I can configure it. Thanks. ------=_NextPart_000_000B_01BD3EFA.5A9E1EA0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN"> <HTML> <HEAD> <META content=3Dtext/html;charset=3Diso-8859-1 = http-equiv=3DContent-Type> <META content=3D'"MSHTML 4.71.2016.0"' name=3DGENERATOR> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT color=3D#000000 face=3DArial size=3D2>Hello, I try configure = in Linux the=20 IDE interface of my SB AWE 32 PnP. Anybody knows which driver I have to = use it=20 or how I can configure it.</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial = size=3D2>Thanks.</FONT></DIV></BODY></HTML> ------=_NextPart_000_000B_01BD3EFA.5A9E1EA0-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] mutt launching web browser
by mperry＠basin.com 21 Feb '98

21 Feb '98

Hi all- I used to have the config line in mutt to launch urls and somewhow have lost that precious bit of information. Can someone help? -- --Michael Perry-- mperry(a)basin.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] KDE-beta-3 and susewm
by nospam_paw＠club-internet.fr 21 Feb '98

21 Feb '98

Ted Harding wrote: > So I would like to ask: having done a "foreign" post-installation of > KDE-beta-3, is it possible to retrospectively integrate the installation with > susewm? > Hi, I did the same thing, S.uS.E. created /opt/kde even though I didn't install the kde beta1 supplied. When I later installed kde beta 3 I found a S.u.S.E. menu with links to all the supplied apps, even those not installed. Phil. -- ------------------------------------------------- Too much of a good thing is WONDERFULL - Mae West ------------------------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] testing
by pepr＠mail.com 21 Feb '98

21 Feb '98

Sorry for the inconvenience, just testing. I did'nt receive anything for the last 48 hours, wondering if your server is down, I have been disconnected from the list, or I am having trouble with my ISP. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0