July 2019 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Repository signature failure - 15.0
by James Knott 18 Jul '19

18 Jul '19

Lately, I've been getting this error. Any idea what's causing it or how I can fix it? Signature verification for Repository http-download.opensuse.org-51a146cc failed tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 11

[opensuse] How to abort swiftly the shutdown process kde plasma
by stakanov 18 Jul '19

18 Jul '19

I have a segfault crash of kmail / kontact quite regularly when shutting down the system. In order to find out what is wrong, I would need to let konqi finish the backtrace. But in the meanwhile the system shuts down. How can I (once the crash happens) nearly immediately block the shutdownprocess of plasma? (I am using X, not wayland). Is there a key combination or some shortcut? Must be a fast one, you have about 10 seconds from the crash to the shutdown. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 10

[opensuse] dual boot Suse's with current one encrypted?
by Daniel Bauer 16 Jul '19

16 Jul '19

Hello, maybe I'll give 15.1 a try. Question: can I install 15.1 without touching my /completely encrypted/ 42.3? I wouldn't use anything from 42.3 in the 15.1 which I first only want to test, so it would be completely independent (and at that moment not encrypted). I'd use a new, naked disk for this test install. Can I do this so that I can boot both, one or the other, without putting in danger my current install? Do I have to watch out for something special? Will the 15.1 installer automatically take care of the boot necessities for my current encrypted 42.3? Thanks for helping with my fears... -- Daniel Bauer photographer Basel Málaga https://www.patreon.com/danielbauer https://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] zypper dup in Tumbleweed not working
by zb4ng 16 Jul '19

16 Jul '19

After several months, I booted Tumbleweed (I'm normally using LEAP) and saw the following message: Download (curl) error for 'http://download.opensuse.org/debug/tumbleweed/repo/oss/repodata/repomd.xml': Error code: Connection failed Error message: ---- Then I tried "zypper dup": linux-yvs2:~ # zypper dup Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. Loading repository data... Reading installed packages... Computing distribution upgrade... 10 Problems: Problem: yast2-ruby-bindings-4.1.0-1.1.x86_64 requires libowcrypt.so.1()(64bit), but this requirement cannot be provided Problem: ruby2.5-2.5.3-2.1.x86_64 requires libruby2_5-2_5 = 2.5.3, but this requirement cannot be provided Problem: ruby2.5-2.5.3-2.1.x86_64 requires ruby2.5-stdlib = 2.5.3, but this requirement cannot be provided Problem: yast2-ruby-bindings-4.1.0-1.1.x86_64 requires libowcrypt.so.1()(64bit), but this requirement cannot be provided Problem: yast2-ruby-bindings-4.1.0-1.1.x86_64 requires libowcrypt.so.1()(64bit), but this requirement cannot be provided Problem: yast2-ruby-bindings-4.1.0-1.1.x86_64 requires libowcrypt.so.1()(64bit), but this requirement cannot be provided Problem: yast2-ruby-bindings-4.1.0-1.1.x86_64 requires libowcrypt.so.1()(64bit), but this requirement cannot be provided Problem: ruby2.5-rubygem-ruby-augeas-0.5.0-3.9.x86_64 requires ruby(abi) = 2.5.0, but this requirement cannot be provided Problem: yast2-ruby-bindings-4.2.1-1.3.i586 requires /usr/bin/ruby.ruby2.6, but this requirement cannot be provided Problem: ruby-2.5-1.2.x86_64 requires ruby2.5 >= 2.5.0, but this requirement cannot be provided Problem: yast2-ruby-bindings-4.1.0-1.1.x86_64 requires libowcrypt.so.1()(64bit), but this requirement cannot be provided Solution 1: Following actions will be done: deinstallation of yast2-fonts-4.0.2-1.1.x86_64 deinstallation of yast2-samba-client-4.0.3-1.1.noarch deinstallation of yast2-pam-4.0.0-1.1.noarch deinstallation of yast2-samba-server-4.1.1-1.1.noarch deinstallation of yast2-services-manager-4.1.8-1.1.noarch deinstallation of patterns-kde-kde_yast-20180709-5.1.noarch Solution 2: Following actions will be done: deinstallation of ruby2.5-2.5.3-2.1.x86_64 deinstallation of ruby2.5-rubygem-fast_gettext-1.7.0-1.1.x86_64 deinstallation of ruby2.5-rubygem-cheetah-0.5.0-1.10.x86_64 Solution 3: deinstallation of cmake-3.13.0-1.1.x86_64 Solution 4: install cmake-3.14.5-2.1.i586 despite the inferior architecture Solution 5: keep obsolete cmake-3.13.0-1.1.x86_64 Solution 6: break yast2-ruby-bindings-4.1.0-1.1.x86_64 by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/4/5/6/s/r/c] (c): c linux-yvs2:~ # ---- If I try one of the "solutions", I'm always seeing more conflicts and it looks like it would break my system more. My question is: Do I have to reinstall TW from scratch or are there any other alternatives ? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 15

[opensuse] Network configuration enhancement
by Roger Oberholtzer 15 Jul '19

15 Jul '19

We use openSUSE in a data collection system. Many of the transducers are Ethernet (wired) based. The configuration of all these transducers (there can be dozens of them - all on their own interfaces) is a bit of a task. And, once set up, we do not want these interface configurations to be altered. So, we do not use Network Manager or wicked. Only root is expected to be changing something. (And maybe not even root). At the same time, there are other interfaces that are useful when the vehicles are not on the road. For example, a USB interface that allows access for service. Or some other Ethernet port that is used for the same activity. It depends on the system layout. Anyway, there are two classes of Ethernet interfaces: those that are essentially carved in stone and should not easily be changed, and those that are more flexible and dynamic. Currently, we have to use YaST to enable/disable one of these dynamic adapters when they are used. As they may not be present at all times (the USB variant), we cannot set up how they should be treated in any permanent fashion. Going in to YaST is something we try to avoid. And in this case, it opens the opportunity to mess up some other interface accidentally. We have been exploring, given the current openSUSE network system, how we could get the flexibility with some interfaces while maintaining hands-off with others. Primarily via udev. But that also has limitations: the interface need not be present - and when/if it is, something can be made to happen. But what happens is not flexible. Ar at least not as flexible as one can set up in, say, a KDE environment . So, I am curious: how might one mix the types of configuration appropriate for different Ethernet interfaces? This is both for existing openSUSE, and for what features might be added in the future. Like a KDE Network Interface that requires password access to modify some interfaces. Or some other brilliant method that does not mess up what currently exists. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] 15.1 LXQt - what camera app/picture viewer
by Felix Miata 14 Jul '19

14 Jul '19

PhotoQT opens to black screen with a very generic looking panel icon, and no discernable way to open any images or camera. LXImage seems too simple, no apparent way to get pix from a Camera. YaST2 doesn't make it too easy to find a Camera app, at least, not a non-GTK-based one. KDE's Digikam requires KF5Contacts, which seems like an address book thingie I shouldn't need to have cluttering this simple installation. Any suggestions? -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

15 44

[opensuse] TW : gwenview5-19.04.2-1.1.x86_64 : unable to start
by ellanios82 14 Jul '19

14 Jul '19

TW : with XFCE , unable start Gwenview5 : getting stuff like : "Invalid Context= "UI" line for icon theme: "/usr/share/icons/Adwaita/24x24/ui/" Invalid Context= "Legacy" line for icon theme: "/usr/share/icons/Adwaita/32x32/legacy/" Invalid Context= "UI" line for icon theme: "/usr/share/icons/Adwaita/32x32/ui/" Invalid Context= "Legacy" line for icon theme: "/usr/share/icons/Adwaita/48x48/legacy/" Invalid Context= "UI" line for icon theme: "/usr/share/icons/Adwaita/48x48/ui/" Invalid Context= "Legacy" line for icon theme: "/usr/share/icons/Adwaita/256x256/legacy/" Invalid Context= "Legacy" line for icon theme: "/usr/share/icons/Adwaita/512x512/legacy/" Invalid Context= "UI" line for icon theme: "/usr/share/icons/Adwaita/scalable/ui/" KCrash: Application 'gwenview' crashing... KCrash: Attempting to start /usr/lib64/libexec/drkonqi from kdeinit" .... any ideas what to try please? .... thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Riot
by stakanov 14 Jul '19

14 Jul '19

Has there been any try to package riot? Not that I am aware of, by I wanted to ask. https://about.riot.im/ _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Blender RC1 is available
by Hans-Peter Jansen 14 Jul '19

14 Jul '19

Hi, Blender Git Master, including 2.80rc1 and the missing dependency libs OpenSubdiv, openvdb and alembic are available now at my repo: https://build.opensuse.org/package/show/home:frispete:blender Any idea, how do I enable OpenMP with clang properly? An attempt to build for 15.1 failed miserably due to a lot of missing dependencies (TBB, OpenShadingLanguage.... If there is some interest, I may tackle this again. Feedback welcome. Pete -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] leap15.1 - multi-path route not working
by Per Jessen 14 Jul '19

14 Jul '19

(same old story - I am migrating a mail cluster to 15.1 ... this is still the first node, "tattoo16") For alternating output over two routers (we call them "frontends"), we use a multipath route defined like this: ip route add default table fe1fe2 nexthop via 10.0.1.145 nexthop via 10.0.2.145 This has worked fine for more than ten years, new connections alternate between 10.0.1.145 and 10.0.2.145. Now on Leap 15.1 I get no alternation - I always get 10.0.2.145. I have tried it swapping it: ip route add default table fe1fe2 nexthop via 10.0.2.145 nexthop via 10.0.1.145 and then I always get 10.0.1.145. I am still researching it, I wonder if some default setting changed since this was set up in 2006 or 2007. Just in case, this is what the route table looks like: # ip route show table fe1fe2 default nexthop via 10.0.2.145 dev ipip1 weight 1 nexthop via 10.0.1.145 dev ipip0 weight 1 10.0.1.144/30 dev ipip0 scope link src 10.0.1.146 10.0.2.144/30 dev ipip1 scope link src 10.0.2.146 127.0.0.0/8 dev lo scope link I switched back to kernel 3.16.7 and here it works as expected. (our test system cluster is currently on 3.16.7). -- Per Jessen, Zürich (17.8°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 10