July 2019 - openSUSE Users - openSUSE Mailing Lists

[opensuse] ssh + thunderbird /firefox behavior
by Simon Becherer 25 Jul '19

25 Jul '19

Hi, i use thunderbird sometimes over ssh. as i understand ssh normally should run and use all (files) (not hardware) resources from server. why did thunderbird do it in this way: if i have an thunderbird open local and ssh thunderbird to a server, it will not open a second thunderbird, it will pop up the already local thunderbird. if i have no local thunderbird open, and i ssh thunderbird, the thunderbird from server will opend and i have all contacts+on-server-stored mails available. BUT when i then like to compose a mail and i have on server my privat pgp (enigmail) key, i am NOT able to send a mail, because thunderbird seems to use keys they are stored local. i do not understand, thunderbird seems to mix local and server files. simmilar is with firefox if you look into the bookmarks. first question is why? and second how could i "really" use the ssh-thunderbird and not only parts of it when i use ssh? thanks, simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Can't write Google Calendars - 15.1 KDE
by James Knott 25 Jul '19

25 Jul '19

Since updating to 15.1, I can no longer write to Google calendars in Thunderbird or Seamonkey. I get an error message "No writable calendars are..." I have tried recreating the calendars, but they still don't work. They continue to work in another system that's still 15.0. Any ideas? And yes, I do have Provider for Google Calendars installed and I can read the calendars. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 2

[opensuse] FF DoH
by Dave Howorth 25 Jul '19

25 Jul '19

I just read a news article about the availability of DNS over HTTPS in Firefox and as a result decided to try it. I'm using FF on Leap 15.0 There is a network.trr.mode config setting that was 0. If I set that to 3 (DoH is enabled, and regular DNS is disabled AFAIK) and network.trr.uri to https://mozilla.cloudflare-dns.com/dns-query then I can't reach https://duckduckgo.com/ for example. If I set network.trr.mode to 2 (2 - DoH is enabled, and regular DNS works as a backup) then I can reach it. I infer that DoH is not working for some reason and it is falling back on normal DNS, but I'm at a loss how to investigate. How can I tell whether FF uses DoH or not on a particular request? How can I see why it is failing? I found FF's HTTP logging and I can see, for example: 2019-07-10 20:42:35.371246 UTC - [14510:Socket Thread]: D/nsHostResolver Resolving host [duckduckgo.com]. 2019-07-10 20:42:35.371251 UTC - [14510:Socket Thread]: D/nsHostResolver No usable address in cache for host [duckduckgo.com]. 2019-07-10 20:42:35.371254 UTC - [14510:Socket Thread]: D/nsHostResolver TRRService::Enabled mConfirmationState=0 2019-07-10 20:42:35.371256 UTC - [14510:Socket Thread]: D/nsHostResolver TrrLookup:: duckduckgo.com service not enabled but I don't know what that means. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] howto change icon's text fonts?
by jdd＠dodin.org 24 Jul '19

24 Jul '19

Hello, Since some time on my Leap 15.0, the text is blurred by some background shadow like you can see on this screenshot: https://www.cjoint.com/doc/19_07/IGyf5XkN47k_Screenshot-20190724-075730.png I don't know if it's an update or some error of mine, but how can I change these fonts? thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] My Thunderbird is misbehaving since the last security update.
by Carlos E. R. 24 Jul '19

24 Jul '19

Hi, My Thunderbird is misbehaving since the last security update. For instance, on this message (Spanish, but the text is irrelevant): <https://lists.opensuse.org/opensuse-es/2019-07/msg00038.html> It displays only the part that was signed with GPG, ie, the previous message. The new text that forms the post I was sent, is missing. I can see it with "View Message Source", or with Alpine. But not Thunderbird. I have received the same post on two mail accounts, and both show the same behaviour. I have noticed other erratic behaviour. When I reply to some posts, using reply to list or reply to all, parts are missing: the line that should say that somebody said this on this day and hour is missing. And the previous quote gets a single ">" instead of two. I can try to identify the post But if I highlight the entire received post and then hit reply to list, the text is correct (except that the signature is not removed). It happens on this post - also on the Spanish mail list, dunno if related: <https://lists.opensuse.org/opensuse-es/2019-07/msg00028.html> When I hit "reply to list" on that post, I the text that I wrote with single quote char (>), when it should get two. And the part he posted also gets single quote char (>). The salutation line is missing. Same if I use "reply to all" or "reply". -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

5 9

Re: [opensuse] Re-install of 15.1 - is there a way to load a list of formerly installed packages to get install parity from the very beginning?
by Carlos E. R. 23 Jul '19

23 Jul '19

On 23/07/2019 15.00, ken wrote: > On 7/23/19 7:13 AM, Carlos E. R. wrote: >> Well, there is the rpm --verify list. It lists every changed file, but >> not the new files. It will tell the new permissions applied, but not the >> changes. >> >> The list is usually very long. Yes, you could compare the changed files >> with the originals in the rpm, and create diff files. >> >> The old YaST backup tool did something of the sort: it created a backup >> of every changed or new file in the installation (usually you tell it to >> skip /home). I did a script that does similarly, must have it somewhere >> if you want it. > > Yes, please. For a long time I've been thinking of writing such a > script. But if you've already done it, then why should I "reinvent the > wheel"? :) Ok! I'll upload to susepaste. The scripts are old and I have not used them in long time, so the will have to be adjusted/modified/corrected. Some of the comments are in Spanish, I can translate later if needed. <http://susepaste.org/48969830> Dated May 2002. Just produces a list of files to backup. <http://susepaste.org/96542719> Dated Oct 2002. # Do a backup of modified files belonging to rpms, # downloaded updates, and tgz to be compiled (from cer) # requires zisofs and patched mkisofs It creates a compressed copied tree of the files to backup, and an ISO ready to burn. <http://susepaste.org/97971710> Dated Jul 2003, but may be older. It will not work currently, it simply called an old YaST script that is no longer there. <http://susepaste.org/10226049> Dated 2006. Seems a most recent version of "bck.cpy", improved. This should be the one to look at. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

1 0

Fwd: Re: [opensuse] cloning 15.0 to 15.1
by DennisG 23 Jul '19

23 Jul '19

On 7/22/19 2:14 AM, jdd(a)dodin.org wrote: > Hello, > > I know some recent discussion where held in this list (I presume) on > similar subject, but don't remember a solution. > > I have on a computer a working 15.0 install. > > I just (yesterday) install 15.1 on an other partition. > > is there a way to recover from the 15.0 a list of *main applications* > (without libraries and dependencies) I could apply to the new 15.1? > > could be like the manually selected apps on 15.0, for example > > thanks > jdd This probably won't do, but fwiw . . . in Yast2 software management, you can create a text file from any package list that you create. (Right-click on the list, "Export this list ...") Any grouping that you can create - e.g., system, repository, group, pattern, status, search (including regular expressions and wild card), etc. Of course you would need a script to strip out the unwanted. --dg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 14

[opensuse] Re-install of 15.1 - is there a way to load a list of formerly installed packages to get install parity from the very beginning?
by stakanov 23 Jul '19

23 Jul '19

Hello, for reasons of understanding which of the current bugs may be fruit of mixed settings or old age, I would like to re-install my laptop with 15.1. The only perplexity that creates me a lot of work every time is: how to get a complete list of all packages currently installed and force this list to be imported at install time (from usb with network repos activated). I would also like to know if it is possible to store the current repos and load them all at install time (like a txt file or similar). Any suggestions? Finally: is there a way to list all personalization of the system with a cli command (that is permissions or settings that are not default?) Thank you. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

Re: [opensuse] please help me with rpmbuild
by Markus Koßmann 23 Jul '19

23 Jul '19

Am Sonntag, 21. Juli 2019, 11:17:39 CEST schrieb Daniel Bauer: > Hi, > > I am trying to compile kuickshow for 15.1, but I fail. Here's the > complete output of my rpmbuild command: > > https://www.daniel-bauer.com/div/kuickshow_rpmbuild.txt > The problem is probably: >make[2]: *** No rule to make target '/usr/lib64/libImlib.so', needed by 'lib/ >libkdeinit4_kuickshow.so'. Stop. > This should be fixed by installing imlib and imlib-devel packages -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 7

[opensuse] okular bug?
by jdd＠dodin.org 23 Jul '19

23 Jul '19

Hello, I didn't write bug report since a long time and I get lost with bugzilla (no 15.0 in list?) by the way somebody may have seen this already before. I have to print mondial relay sticker to send a letter. I get a pdf file. Okular opens the file and display it correctly, but do not *print* bar code (visible on screen). One have to tick the option "rasterize first" in the print dialog. lpr <pdfname> works OK I can share the pdf privately, but not publicly as it have the client's address thanks jdd -- http://dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0