October 2018 - openSUSE Users - openSUSE Mailing Lists

[opensuse] ls or find on directories with millions of files ?
by Per Jessen 01 Nov '18

01 Nov '18

This might be file system dependent, I'm not sure. I've been doing some tidying up and got stuck on a few directories with millions of files in them. 3+ million per directory. Doing a 'find' takes a very long time and also essentially chokes the system. I ended up writing a small utility using getdents() instead, much faster and the system remains operational. I was just wondering if e.g. 'find' or 'ls' had some options that would limit the scope ? (not mtime etc). -- Per Jessen, Zürich (5.9°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 24

[opensuse] Why am I now presented with 3 FULL Nvidia Licenses on Upgrade?
by David C. Rankin 01 Nov '18

01 Nov '18

All, What changed? Why are we now presented with the Nvidia license for every nvidia component to upgrade the drivers? Over and over again I was presented wit the following 3 times just to be able to update: (Use arrows or pgUp/pgDown keys to scroll the text by lines or pages.) In order to install 'nvidia-computeG04', you must agree to terms of the following license agreement: License For Customer Use of NVIDIA Software IMPORTANT NOTICE -- READ CAREFULLY: This License For Customer Use of NVIDIA Software ("LICENSE") is the agreement which governs use of the software of NVIDIA Corporation and its subsidiaries ("NVIDIA") downloadable herefrom, including computer software and associated printed materials ("SOFTWARE"). By downloading, installing, copying, or otherwise using the SOFTWARE, you agree to be bound by the terms of this LICENSE. If you do not agree to the terms of this LICENSE, do not download the SOFTWARE. RECITALS Use of NVIDIA's products requires three elements: the SOFTWARE, the hardware on a graphics controller board, and a personal computer. The SOFTWARE is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE is not sold, and instead is only licensed for use, strictly in accordance with this document. The hardware is protected by various patents, and is sold, but this agreement does not cover that sale, since it may not necessarily be sold as a package with the SOFTWARE. This agreement sets forth the terms and conditions of the SOFTWARE LICENSE only. 1. DEFINITIONS 1.1 Customer. Customer means the entity or individual that downloads the SOFTWARE. 2. GRANT OF LICENSE 2.1 Rights and Limitations of Grant. NVIDIA hereby grants Customer the following non-exclusive, non-transferable right to use the SOFTWARE, with the following limitations: 2.1.1 Rights. Customer may install and use one copy of the SOFTWARE on a single computer, and except for making one back-up copy of the Software, may not otherwise copy the SOFTWARE. This LICENSE of SOFTWARE may not be shared or used concurrently on different computers. 2.1.2 Linux/FreeBSD Exception. Notwithstanding the foregoing terms of Section 2.1.1, SOFTWARE designed exclusively for use on the Linux or FreeBSD operating systems, or other operating systems derived from the source code to these operating systems, may be copied and redistributed, provided that the binary files thereof are not modified in any way (except for unzipping of compressed files). 2.1.3 Limitations. No Reverse Engineering. Customer may not reverse engineer, decompile, or disassemble the SOFTWARE, nor attempt in any other manner to obtain the source code. No Separation of Components. The SOFTWARE is licensed as a single product. Its component parts may not be separated for use on more than one computer, nor otherwise used separately from the other parts. No Rental. Customer may not rent or lease the SOFTWARE to someone else. 3. TERMINATION This LICENSE will automatically terminate if Customer fails to comply with any of the terms and conditions hereof. In such event, Customer must destroy all copies of the SOFTWARE and all of its component parts. Defensive Suspension. If Customer commences or participates in any legal proceeding against NVIDIA, then NVIDIA may, in its sole discretion, suspend or terminate all license grants and any other rights provided under this LICENSE during the pendency of such legal proceedings. 4. COPYRIGHT All title and copyrights in and to the SOFTWARE (including but not limited to all images, photographs, animations, video, audio, music, text, and other information incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by NVIDIA, or its suppliers. The SOFTWARE is protected by copyright laws and international treaty provisions. Accordingly, Customer is required to treat the SOFTWARE like any other copyrighted material, except as otherwise allowed pursuant to this LICENSE and that it may make one copy of the SOFTWARE solely for backup or archive purposes. 5. APPLICABLE LAW This agreement shall be deemed to have been made in, and shall be construed pursuant to, the laws of the State of California. 6. DISCLAIMER OF WARRANTIES AND LIMITATION ON LIABILITY 6.1 No Warranties. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND NVIDIA AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 6.2 No Liability for Consequential Damages. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL NVIDIA OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF NVIDIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 7. MISCELLANEOUS The United Nations Convention on Contracts for the International Sale of Goods is specifically disclaimed. If any provision of this LICENSE is inconsistent with, or cannot be fully enforced under, the law, such provision will be construed as limited to the extent necessary to be consistent with and fully enforceable under the law. This agreement is the final, complete and exclusive agreement between the parties relating to the subject matter hereof, and supersedes all prior or contemporaneous understandings and agreements relating to such subject matter, whether oral or written. Customer agrees that it will not ship, transfer or export the SOFTWARE into any country, or use the SOFTWARE in any manner, prohibited by the United States Bureau of Export Administration or any export laws, restrictions or regulations. This LICENSE may only be modified in writing signed by an authorized officer of NVIDIA. Do you agree with the terms of the license? [yes/no] (no): yes -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] already MS is tracking you via google for github.com
by Linda Walsh 01 Nov '18

01 Nov '18

Tried to download a file from github (from the adobe font collection got to by following discussion links for Source * Pro" in opensuse-factory -- specifically the color emoji ones. It failed: <link rel="assets" href="https://assets-cdn.github.com/"> <meta name="pjax-timeout" content="1000"> <meta name="request-id" content="708B:2C0A:18AB08:24DFC7:5BD8C7F9" data-pjax-transient> <meta name="selected-link" value="repo_source" data-pjax-transient> <meta name="google-site-verification" content="KT5gs8h0wvaagLKAVWq8bbeNwnZZK1r1XQysX3xurLU"> <meta name="google-site-verification" content="ZzhVyEFwb7w3e0-uOTltm8Jsck2F5StVihD0exw2fsA"> <meta name="google-site-verification" content="GXs5KoUUkNCoaAZn7wPN-t01Pywp9M3sEjnt_3_ZWPc"> <meta name="octolytics-host" ... /> <meta class="js-ga-set" name="dimension1" content="Logged Out"> --------------------------------------------------^^^^^^^^^^^^^^^ Apparently they want to track what you download by login now... Never used to have this prob before MS bought GitHub.... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Failed to start Setup Virtual Console
by Josep M Solé 31 Oct '18

31 Oct '18

Most of the times I start/stop the notebook, I've got the following message: > [FAILED] Failed to start Setup Virtual Console. > > see 'systemctl status systemd-vconsole-setup.service' for details. > > Starting Show Plymouth Boot Screen... > After this message the computer seems to work properly. The details I've got are: > ● systemd-vconsole-setup.service - Setup Virtual Console > Loaded: loaded > (/usr/lib/systemd/system/systemd-vconsole-setup.service; static; > vendor preset: disabled) > Active: inactive (dead) since Wed 2018-10-31 07:09:04 CET; 13min ago > Docs: man:systemd-vconsole-setup.service(8) > man:vconsole.conf(5) > Main PID: 486 (code=exited, status=0/SUCCESS) > > Oct 31 07:09:04 linux-tuxedo systemd[1]: Started Setup Virtual Console. Is there any way to get rid off the starting message? Should I be concerned about it? Thanks in advance Plasma 5.12.6 Opensuse Leap 15.0 -- Josep M Solé -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Mail List Bouncing?
by David C. Rankin 31 Oct '18

31 Oct '18

I received the following earlier from the mail server: This is the mail system at host mx1.suse.de. #################################################################### # THIS IS A WARNING ONLY. YOU DO NOT NEED TO RESEND YOUR MESSAGE. # #################################################################### Your message could not be delivered for more than 6 hour(s). It will be retried until it is 1 day(s) old. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <opensuse(a)lists5.opensuse.org> (expanded from <opensuse(a)opensuse.org>): delivery temporarily suspended: connect to mail2.suse.de[195.135.221.8]:10025: Connection timed out Is there something wrong with mail2.suse.de? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Keep certain messages from going to journal
by Michael Fischer 30 Oct '18

30 Oct '18

Noticed while debugging my 'subject: login weirdness' problems: I have modified my /etc/resolv.conf. How to keep thousands of messages each day from going to the journal? (DuckDuckGo not being helpful) Thanks... Michael -- Michael Fischer michael(a)visv.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] help for downloading xpi from addons.mozilla.org site
by Istvan Gabor 30 Oct '18

30 Oct '18

Hello: I would like to download (not to install) screengrab xpi with seamonkey web browser because I want to have the xpi file with its original name locally. When I visit the download page https://addons.mozilla.org/en-US/firefox/addon/screengrab-fix-version/versi… with my seamonkey web browser I cannot find any download link to the xpi files. I see only big green buttons with the message "Only with Firefox — Get Firefox Now!", and these buttons direct me to firefox download page. What I want is to save the xpi for later use. Why doesn't the addons page allow the download of the xpi files with different browsers? How can I find out the xpi download links? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 24

[opensuse] Why doesn't firewalld start at boot?
by Dave Plater 29 Oct '18

29 Oct '18

Hi, I first did a google and a word search in this list and the support list and the only mention of firewalld not starting at boot didn't have any replies. I did a bug search but found nothing, in fact it seems that people want to stop it at boot not start it. My Leap:15.0 laptop has it starting at boot, the only difference is that the laptop uses network manager and this pc uses wicked. I haven't bothered with this until now because kde connect doesn't work without the firewall running. Why doesn't firewalld start at boot suse firewall did. Thanks Dave P -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 27

[opensuse] The D in Systemd stands for 'Dammmmit!' A nasty DHCPv6 packet can pwn a vulnerable Linux box • The Register
by James Knott 29 Oct '18

29 Oct '18

I just came across this article. However, as this quote shows, whoever wrote the article doesn't really understand IPv6: "Thus, a rogue DHCPv6 server on a network, or in an ISP, could emit specially crafted router advertisement messages that wake up these clients, exploit the bug, and possibly hijack or crash vulnerable Systemd-powered Linux machines." Router advertisements are sent via link local addresses, which means only the router on the same network can cause this, as link local addresses are never passed by a router. Also, SLAAC is often used, not DHCPv6 for clients. You won't see any DHCPv6 clients on the local network, unless specifically enabled. The WAN side might be vulnerable, but that would require an ISPs router to be compromised. I doubt most ISPs would be running Linux on their network. They tend to go for high end Cisco gear or equivalent. There are some Cisco models that run on Linux, but they're not high end. https://www.theregister.co.uk/2018/10/26/systemd_dhcpv6_rce/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Friday - something to wrap your head around (literally) "twisted light"
by David C. Rankin 28 Oct '18

28 Oct '18

Or more formally OAM: https://www.theregister.co.uk/2018/10/25/twisted_light_networking_speeds/ apparently has the potential to increase fiber-throughput 100 fold. Now I like to think I'm roundly educated, and my undergrad did dig heavily into the wave-particle duality of photons and light, but this is the first time I've heard about OAM or its use to encode information. Future may not be all that boring after all. -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 20

[opensuse] Conflict in zypp.conf defaults in 15.0
by Carlos E. R. 28 Oct '18

28 Oct '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 /etc/zypp/zypp.conf.rpmnew in 15.0 contains this text: ## ## EXPERTS ONLY: TUNE DISTRIBUTION UPGRADE (DUP) ## Set whether to allow changing the packages vendor upon DUP. If you ## are following a continuous distribution like Tumbleweed or Factory ## where you use 'zypper dup --no-allow-vendor-change' quite frequently, ## you may indeed benefit from disabling the VendorChange. Packages from ## OBS repos will then be kept rather than being overwritten by Tumbleweeds ## version. ## ## CHANGING THE DEFAULT IS NOT RECOMMENDED. ## ## Valid values: boolean ## Default value: true ## solver.dupAllowVendorChange = false Notice that it says that the default is "true", that the variable is already defined as "false", and that it says that changing the default is not reccomended. This is a contradiction. What should it say? Should I just report in bugzilla? - -- Cheers Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlvVctoACgkQtTMYHG2NR9XA3QCfSNlN5jxAnAr/1N346gRzdXgE Ei4AnAgY9y0naqKImn2bRly67dorv3u0 =fTFY -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Question re rsync backup and hard links
by Carlos E. R. 28 Oct '18

28 Oct '18

Hi, I just did a backup of my main laptop using rsync: rsync --archive --acls --xattrs --hard-links \ --sparse --stats --human-readable --checksum \ --link-dest=/mnt/backup/previous/home \ /mnt/home/ \ /mnt/backup/current/home The idea is that files that exist in the previous backup are hard-linked into the current backup, saving space. But how much did I save? How many files and how many bytes are hardlinks? Maybe the info is in the rsync output, but I do not see it clearly: > Number of files: 252,287 (reg: 237,101, dir: 14,772, link: 375, special: 39) > Number of created files: 29,678 (reg: 28,379, dir: 1,283, link: 16) > Number of deleted files: 0 > Number of regular files transferred: 32,447 > Total file size: 257.29G bytes > Total transferred file size: 16.85G bytes > Literal data: 16.85G bytes > Matched data: 0 bytes > File list size: 4.91M > File list generation time: 0.004 seconds > File list transfer time: 0.000 seconds > Total bytes sent: 16.87G > Total bytes received: 648.53K > > sent 16.87G bytes received 648.53K bytes 2.22M bytes/sec > total size is 257.29G speedup is 15.25 > > real 126m33.023s > user 27m19.699s > sys 10m16.830s Maybe the clue is total size 257G vs sent 16.8G I know that summing up all the files in the backup disk (XFS) they take 1105G (by mc), but "df -h" says the disk is 932G, 648G are used, and 248G are free, so indeed there is saved space. And after erasing the home backup (I did it twice, so I deleted one copy), which takes 245370M bytes, df reports: Legolas:~ # df -h /media/Erebor_2/ Filesystem Size Used Avail Use% Mounted on /dev/sdb1 932G 617G 315G 67% /media/Erebor_2 So one home backup uses 648-617 = 31GB, and about 214G are hard links. But it is a roundabout manner of finding out... (I have doubts about what GB units are the tools using, too) -- Cheers / Saludos, Carlos E. R. (from openSUSE 15.0 (Legolas))

3 2

[opensuse] Adding existing encrypted partition in YaST after installation
by Jan Ritzerfeld 27 Oct '18

27 Oct '18

Hey, the day before yesterday, I have finally managed to upgrade to Leap 15. The system works fine! My home partition is fully LUKS-encrypted and while installing Leap 15, YaST asked me to provide the passphrase. I did not provide it because I always install new versions in parallel and migrate the home directory later after having configured the system and tested it. After doing so, I wanted to add the encrypted home partition using YaST. However, I did not find any way to open the encrypted home. I am pretty sure that YaST of Leap 42.3 and before provided the possibility to do so. Could anyone confirm this? Gruß Jan -- In any collection of data, the figure most obviously correct, beyond all need of checking, is the mistake. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] More current Firefox with TLS 1.3 support?
by cagsm 26 Oct '18

26 Oct '18

Hello list participants, is this current ESR 60.x releases gonna be TLS 1.3 enabled or do we need a higher more current firefox release branch? Will current opensuse 15.0 advanced beyond this 60.something? TY. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] CVE-2018-14665 - Xorg
by David C. Rankin 26 Oct '18

26 Oct '18

Interesting: "Security This two-year-old X.org give-me-root hole is so trivial to exploit, you can fit it in a single tweet" https://www.theregister.co.uk/2018/10/25/x_org_server_vulnerability/ -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Leap 15 fails to boot after kernel update today
by David C. Rankin 26 Oct '18

26 Oct '18

All, Last line is Mounted filesystem with ordered data mode Opts: null and the boot hangs. Any ideas? Note, booting prior kernel works just fine, so it is something specific to new -19 kernel that came out in the past day or two. This is running in virtualbox. All prior kernel updates have been just fine. This one completed fine, but as soon as it got to the point of invoking wayland, it just locks. Using Yast to remove the latest kernel solves the problem. Booting with the -16 kernel works great. -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 11

[opensuse] "No ReCAPTCHA response provided" error message
by don fisher 26 Oct '18

26 Oct '18

I tried to join a mailing list and received "No ReCAPTCHA response provided" message. How does one get Thunderbird, or Firefox to return the desired response? I assume it is Thunderbird, since it is a mailing list. Never hit this one before. Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 35

[opensuse] Filesystem Hierachy - Correct Mount Location
by Paul Groves 26 Oct '18

26 Oct '18

Hi All, I have a single 1TB disk on a server at the moment mounted at root (/). I have run out of space so I have installed a 4TB hard disk along side the existing one. I will name this new disk media so it will be /mount-location/media I am trying to work out the correct location to mount this disk. It will contain data to be server to the network e.g. music and videos. So data will not change often. I though /mnt but that is apparently for temporarily mounted filesystems. perhaps either /var or /srv Where would best practice indicate I should mount this disk? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 25

[opensuse] orca ate my CPU and typing speed
by ken 25 Oct '18

25 Oct '18

Since updating the kernel earlier this week, my keyboard has been really slow. I mean I could type faster than the characters would appear onscreen. This happened everywhere, in web pages, in emacs, even at a shell prompt in a terminal window. So finally today I checked some things and found (using "top") that "orca" was using 100% of a CPU (this laptop has 8 CPUs). "orca" was first a child process of "gkrellm" the first time I looked in "ps"; but when I looked (again in "ps") just a couple minutes later, "orca" was a child process of some "de-dup" process. That wasn't the entire name of the "de-dup" process, but only what of it I can remember. So I killed the "orca" process. I haven't noticed anything changing in the functioning of my system... except that my keyboard is now back up to speed; the characters appear onscreen as I type them, as they should. So I can say, "it's fixed." But I was wondering if anyone else has seen this problem. And what the heck is "orca" for...? why do I even need it? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 10

[opensuse] IPv6 RDNSS not working 15.0
by James Knott 25 Oct '18

25 Oct '18

I just tried an experiment by turning off the DHCP server on my firewall. This means that DNS info can only be obtained by RDNSS in the router advertisement. With OpenSUSE, while I get an address and domain name, I do not get a DNS server address. With the same computer, running Windows 10, I get a DNS server and host name lookup works fine. RDNSS also works on my Android tablet. Why not on OpenSUSE? Wireshark shows RDNSS is providing the relevant info. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 6

[opensuse] Strange SCSI problem
by Paul Groves 25 Oct '18

25 Oct '18

Hi all. anyone come across this before? I have the following devices connected to the internal SCSI bus: Adaptec ASC-29320ALP U320 SCSI card. (Termination is on). HP Storageworks Ultrium 448 HP Sotrageworks Ultrium 1760 Built-in Terminator on cable When the server boots the Adaptec BIOS comes up first and scans the SCSI IDs. The problem is, whichever tape drive is the first ID on the SCSI bus. The scanning for IDs gets stuck on this drive for a while, about 2-3 minutes and the tray that takes the tape into the drive goes click click click for about a minute with the drives Ready LED flashing. Eventually it stops flashing and clicking and the SCSI card continues to scan IDs without a problem. When it gets to the second tape drive and so on it doesn't make it go click click flash and wait for ages. If I swap the SCSI ID jumpers over the problem also swaps. As I said it is whatever the lowest SCSI ID number is. Any clue what this might be? When the server boots the tape drives both work fine. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Asus M5A97 EvoR2 and logitech keyboard/mouse wirless with Leap 15. No wake up of USB HID after suspend to disc.
by stakanov 24 Oct '18

24 Oct '18

I have since leap 15 the following problem: The computer goes to sleep, after it is possible only to wake it up with the power button. Fair enough, that is expected. Then, they plasma desktop comes up, but the mouse and the keyboard have any functionality. I tried everything, included to by a ps/2 to usb adapter and try the ps2 support. Nothing. Prior to leap 15, it was straightforward, you would wake up the system that way and all worked like charm. As the system is AMD, I tried also the workaround with amd_iommu=on and immo=soft in boot parameters. No difference, once the system did suspend to disc, no way to get usb support back. I therefore think this is either kde related or kernel related. What did change in Leap 15 in the way it handles usb that makes logitech hardware unusable after a wake up? Thank you for all suggestion. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Intel 82574L NIC Problem
by Paul Groves 24 Oct '18

24 Oct '18

Hi all, I am having a major problem on one of my systems with a network controller. The system has the Intel DQ77MK motherboard. This board has dual NICs. The first NIC, an Intel 82574LM works fine and is called eno1 The second NIC, an intel 82574L is the problem. The second NIC is called rename3, or sometimes rename2 / rename6 or rename7 etc.. It keeps changing. Whenever I try to apply any configuration to this NIC it changes name again, therefore I have no network connection. So I change the name in the config and the NIC changes name again. I have never seen a NIC called rename before. What is this trickery?!?!? The system is running ubuntu 18.04. Now I have probably confused you by posting on the OpenSUSE list, but the fact is I have posted on the Ubuntu forum and it has been 4 days and I have had no reply what so ever. It is still Linux after all, so hopefully one of you might be able to assist? Ubuntu 18.04 uses netplan to manage the network configuration. I intend to set up an bond in balance-rr mode as I have done on another system without issue. How can I go about diagnosing this? This is the first time I have every had a NIC not work in any linux distro (apart from broadcom wifi drives cough cough..) so I have literally no in-depth knowledge of networking in linux. so basically... HELP! lol First things I checked: Output of lspci: paul@s34:~$ lspci | grep net 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection Output of ifconfig: paul@s34:~$ ifconfig -a eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.164 netmask 255.255.255.0 broadcast 192.168.0.255 inet6 fe80::7e05:7ff:fe0f:11c4 prefixlen 64 scopeid 0x20<link> ether 7c:05:07:0f:11:c4 txqueuelen 1000 (Ethernet) RX packets 1049 bytes 106842 (106.8 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 315 bytes 44842 (44.8 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xf7f00000-f7f20000 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 178 bytes 12392 (12.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 178 bytes 12392 (12.3 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 rename9: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 7c:05:07:0f:11:c5 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 18 memory 0xf7e00000-f7e20000 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 28

[opensuse] How to open this broadcast in firewald?
by Carlos E. R. 24 Oct '18

24 Oct '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I get these messages in the firewall log: <0.4> 2018-10-21 22:16:14 Legolas kernel - - - [ 5112.933551] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e:00:00:01:f8:8e:85:64:78:f2:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 <0.4> 2018-10-21 22:16:29 Legolas kernel - - - [ 5128.151646] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e:00:00:01:f8:8e:85:64:78:f2:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 <0.4> 2018-10-21 22:16:44 Legolas kernel - - - [ 5143.203427] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e:00:00:01:f8:8e:85:64:78:f2:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 I understand it is a broadcast from the router, probably trying to find information about the local network. How do I tell the firewalld to accept them? I have no idea. - -- Cheers Carlos E. R. (from 15.0 x86_64 at Legolas) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCW8zfPhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVMoYAnj9WVi0rsqWIbGH+z2An 1xWnZfyhAJ93dOlm5AV+2Ovq3hr8tdJ5z9iXbQ== =S8Mz -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 45

[opensuse] continous access on/spinning up of floppy drive
by Paul Neuwirth 23 Oct '18

23 Oct '18

This is an OpenPGP/MIME signed message (RFC2440, RFC3156). --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_= Content-Type: text/plain; charset="utf-8" Content-Disposition: inline; filename="message.txt" Content-Transfer-Encoding: quoted-printable Hello group, I have on several machines this problem: they are continously trying to=20 access the floppy drives. Two drives already defective, due to the=20 mechanic stress. dmesg shows following continously: [1537682.559487] sd 0:0:3:0: [sdc] Read Capacity(10) failed: Result:=20 hostbyte=3DDID_OK driverbyte=3DDRIVER_SENSE [1537682.559496] sd 0:0:3:0: [sdc] Sense Key : Not Ready [current] [1537682.559498] sd 0:0:3:0: [sdc] Add. Sense: Logical unit not ready,=20 cause not reportable [1537682.656688] sd 0:0:3:0: [sdc] Spinning up disk... [1537683.668046]=20 ............................................................................= ..................not=20 responding... [1537783.093938] sd 0:0:3:0: [sdc] Spinning up disk... [1537784.104049]=20 ............................................................................= ..................not=20 responding... this can't be the wanted behaviour for any removable storage devices? Any Hints? Thank you and have a nice weekend --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_= Content-Type: application/pgp-signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 Comment: Topal (http://freshmeat.net/projects/topal) iQIcBAEBAgAGBQJaLS66AAoJEIiaa+Y8YDPuZSUP/itt7+QHjNCwX6Wi352+lANf whjep7nBWy6Q0bS2PO/ymWDGiodFkO/AvM+MIitdK4cAm1HCBbMZjKsZYLD3e1LR ZnskqO66VG58TU6lVB1jEXWKlp6OKeb6Ar24SR0YxB4F+ZcbSwZI5w62JEBsozhV X4imcBdO+ztJFSW/hFLeV4WrfrplcTufyL6nw+5TtImrVs62uEg20LYjA//OxlHJ NmXM07A48uVBijRUmMsqeyRMevoKjKop2iICZgKyvTnRtRqx0jbzVeqj+aLqnbaq ncdBnBr7Vr9S86TVGHjIDHPN8Ws8dnufk1GwRTQR+Aj4z58g2r88j/u6o7csTFla vINP3ClCp6MRVbVbEqIYOIvG8NDIVTiwQwXk3CeCf+Be71JbDUMjV9GwVl+X9ksC oNBwwFi+mhHQGJOuX/54HGUEn3lJ1ixQzLimuXTgWmdsb1WoWuG+lNO13NhU+ZVn /IKpcqVjkXikQi9hrmZTUutmrFjJ1QusjnPJQDuBLYB0E/lMWjTpUNmRGw71hrDb uccAYc3sQP6zMuUfEgPWewhMmuTwn1LoQdqYrZ0p1+1z/+w5cB3DOB4JILmbKBUH QUYaDhefxPL1oRBtOxoDAdABJLAfgfKdEE0+g0u6HA67Atioe3HP8MWonrKgs3FC pvU9BHc2k0ASHh7HEsRx =uYfb -----END PGP SIGNATURE----- --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_=-- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

17 75