October 2018 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Strange SCSI problem
by Paul Groves 25 Oct '18

25 Oct '18

Hi all. anyone come across this before? I have the following devices connected to the internal SCSI bus: Adaptec ASC-29320ALP U320 SCSI card. (Termination is on). HP Storageworks Ultrium 448 HP Sotrageworks Ultrium 1760 Built-in Terminator on cable When the server boots the Adaptec BIOS comes up first and scans the SCSI IDs. The problem is, whichever tape drive is the first ID on the SCSI bus. The scanning for IDs gets stuck on this drive for a while, about 2-3 minutes and the tray that takes the tape into the drive goes click click click for about a minute with the drives Ready LED flashing. Eventually it stops flashing and clicking and the SCSI card continues to scan IDs without a problem. When it gets to the second tape drive and so on it doesn't make it go click click flash and wait for ages. If I swap the SCSI ID jumpers over the problem also swaps. As I said it is whatever the lowest SCSI ID number is. Any clue what this might be? When the server boots the tape drives both work fine. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Asus M5A97 EvoR2 and logitech keyboard/mouse wirless with Leap 15. No wake up of USB HID after suspend to disc.
by stakanov 24 Oct '18

24 Oct '18

I have since leap 15 the following problem: The computer goes to sleep, after it is possible only to wake it up with the power button. Fair enough, that is expected. Then, they plasma desktop comes up, but the mouse and the keyboard have any functionality. I tried everything, included to by a ps/2 to usb adapter and try the ps2 support. Nothing. Prior to leap 15, it was straightforward, you would wake up the system that way and all worked like charm. As the system is AMD, I tried also the workaround with amd_iommu=on and immo=soft in boot parameters. No difference, once the system did suspend to disc, no way to get usb support back. I therefore think this is either kde related or kernel related. What did change in Leap 15 in the way it handles usb that makes logitech hardware unusable after a wake up? Thank you for all suggestion. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Intel 82574L NIC Problem
by Paul Groves 24 Oct '18

24 Oct '18

Hi all, I am having a major problem on one of my systems with a network controller. The system has the Intel DQ77MK motherboard. This board has dual NICs. The first NIC, an Intel 82574LM works fine and is called eno1 The second NIC, an intel 82574L is the problem. The second NIC is called rename3, or sometimes rename2 / rename6 or rename7 etc.. It keeps changing. Whenever I try to apply any configuration to this NIC it changes name again, therefore I have no network connection. So I change the name in the config and the NIC changes name again. I have never seen a NIC called rename before. What is this trickery?!?!? The system is running ubuntu 18.04. Now I have probably confused you by posting on the OpenSUSE list, but the fact is I have posted on the Ubuntu forum and it has been 4 days and I have had no reply what so ever. It is still Linux after all, so hopefully one of you might be able to assist? Ubuntu 18.04 uses netplan to manage the network configuration. I intend to set up an bond in balance-rr mode as I have done on another system without issue. How can I go about diagnosing this? This is the first time I have every had a NIC not work in any linux distro (apart from broadcom wifi drives cough cough..) so I have literally no in-depth knowledge of networking in linux. so basically... HELP! lol First things I checked: Output of lspci: paul@s34:~$ lspci | grep net 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection Output of ifconfig: paul@s34:~$ ifconfig -a eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.164 netmask 255.255.255.0 broadcast 192.168.0.255 inet6 fe80::7e05:7ff:fe0f:11c4 prefixlen 64 scopeid 0x20<link> ether 7c:05:07:0f:11:c4 txqueuelen 1000 (Ethernet) RX packets 1049 bytes 106842 (106.8 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 315 bytes 44842 (44.8 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xf7f00000-f7f20000 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 178 bytes 12392 (12.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 178 bytes 12392 (12.3 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 rename9: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 7c:05:07:0f:11:c5 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 18 memory 0xf7e00000-f7e20000 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 28

[opensuse] How to open this broadcast in firewald?
by Carlos E. R. 24 Oct '18

24 Oct '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I get these messages in the firewall log: <0.4> 2018-10-21 22:16:14 Legolas kernel - - - [ 5112.933551] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e:00:00:01:f8:8e:85:64:78:f2:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 <0.4> 2018-10-21 22:16:29 Legolas kernel - - - [ 5128.151646] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e:00:00:01:f8:8e:85:64:78:f2:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 <0.4> 2018-10-21 22:16:44 Legolas kernel - - - [ 5143.203427] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e:00:00:01:f8:8e:85:64:78:f2:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 I understand it is a broadcast from the router, probably trying to find information about the local network. How do I tell the firewalld to accept them? I have no idea. - -- Cheers Carlos E. R. (from 15.0 x86_64 at Legolas) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCW8zfPhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVMoYAnj9WVi0rsqWIbGH+z2An 1xWnZfyhAJ93dOlm5AV+2Ovq3hr8tdJ5z9iXbQ== =S8Mz -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 45

[opensuse] continous access on/spinning up of floppy drive
by Paul Neuwirth 23 Oct '18

23 Oct '18

This is an OpenPGP/MIME signed message (RFC2440, RFC3156). --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_= Content-Type: text/plain; charset="utf-8" Content-Disposition: inline; filename="message.txt" Content-Transfer-Encoding: quoted-printable Hello group, I have on several machines this problem: they are continously trying to=20 access the floppy drives. Two drives already defective, due to the=20 mechanic stress. dmesg shows following continously: [1537682.559487] sd 0:0:3:0: [sdc] Read Capacity(10) failed: Result:=20 hostbyte=3DDID_OK driverbyte=3DDRIVER_SENSE [1537682.559496] sd 0:0:3:0: [sdc] Sense Key : Not Ready [current] [1537682.559498] sd 0:0:3:0: [sdc] Add. Sense: Logical unit not ready,=20 cause not reportable [1537682.656688] sd 0:0:3:0: [sdc] Spinning up disk... [1537683.668046]=20 ............................................................................= ..................not=20 responding... [1537783.093938] sd 0:0:3:0: [sdc] Spinning up disk... [1537784.104049]=20 ............................................................................= ..................not=20 responding... this can't be the wanted behaviour for any removable storage devices? Any Hints? Thank you and have a nice weekend --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_= Content-Type: application/pgp-signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 Comment: Topal (http://freshmeat.net/projects/topal) iQIcBAEBAgAGBQJaLS66AAoJEIiaa+Y8YDPuZSUP/itt7+QHjNCwX6Wi352+lANf whjep7nBWy6Q0bS2PO/ymWDGiodFkO/AvM+MIitdK4cAm1HCBbMZjKsZYLD3e1LR ZnskqO66VG58TU6lVB1jEXWKlp6OKeb6Ar24SR0YxB4F+ZcbSwZI5w62JEBsozhV X4imcBdO+ztJFSW/hFLeV4WrfrplcTufyL6nw+5TtImrVs62uEg20LYjA//OxlHJ NmXM07A48uVBijRUmMsqeyRMevoKjKop2iICZgKyvTnRtRqx0jbzVeqj+aLqnbaq ncdBnBr7Vr9S86TVGHjIDHPN8Ws8dnufk1GwRTQR+Aj4z58g2r88j/u6o7csTFla vINP3ClCp6MRVbVbEqIYOIvG8NDIVTiwQwXk3CeCf+Be71JbDUMjV9GwVl+X9ksC oNBwwFi+mhHQGJOuX/54HGUEn3lJ1ixQzLimuXTgWmdsb1WoWuG+lNO13NhU+ZVn /IKpcqVjkXikQi9hrmZTUutmrFjJ1QusjnPJQDuBLYB0E/lMWjTpUNmRGw71hrDb uccAYc3sQP6zMuUfEgPWewhMmuTwn1LoQdqYrZ0p1+1z/+w5cB3DOB4JILmbKBUH QUYaDhefxPL1oRBtOxoDAdABJLAfgfKdEE0+g0u6HA67Atioe3HP8MWonrKgs3FC pvU9BHc2k0ASHh7HEsRx =uYfb -----END PGP SIGNATURE----- --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_=-- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

17 75

[opensuse] Names of standard folders in own home directory are in other language
by Josep 22 Oct '18

22 Oct '18

Hello everyone, The installation of Opensuse 15.0 was done in a diferent language than mine. After installation I changed the packages to my language. Everything went ok, except my home directory which remains in the installation language. How can I change it? Plasma KDE 5.12.6 Thanks in advance Josep M Solé -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 10

[opensuse] SUSE Studio imagewriter
by A. den Oudsen 21 Oct '18

21 Oct '18

SUSE Studio imagewriter is a marvellous application!! André den Oudsten -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Broken menu titles in okular
by Bob Williams 21 Oct '18

21 Oct '18

Some time ago I was fiddling with okular's settings [Configuration/Configure Okular]. I'm not sure what I did, but since then the 'File', 'Configuration' and 'Help' menus have had their titles replaced with the words 'No text'. 'Edit', 'View', 'Go', 'Bookmarks' and 'Tools' are unchanged. The menus still work. If I knew where these variables were stored I could remove that file and re-install okular. Removing and re-installing doesn't work, which means the changes I made are persisting, which is annoying. -- Bob Williams System: Linux 4.18.12-2.ga880bd8-default Distro: Desktop: KDE Frameworks: 5.45.0, Qt: 5.9.4 and Plasma: 5.12.5

2 1

[opensuse] Samba en TW
by Frans de Boer 19 Oct '18

19 Oct '18

Just updated TW with the latest packages (zypper dup ---no-rec) only to find that Samba is not working anymore, see below: systemctl start smb.service Job for smb.service failed because the control process exited with error code. See "systemctl status smb.service" and "journalctl -xe" for details. pws1:~ # systemctl status smb.service ● smb.service - Samba SMB Daemon Loaded: loaded (/usr/lib/systemd/system/smb.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Fri 2018-10-19 22:09:58 CEST; 6s ago Process: 8913 ExecStart=/usr/sbin/smbd --foreground --no-process-group $SMBDOPTIONS (code=exited, status=255) Process: 8912 ExecStartPre=/usr/share/samba/update-apparmor-samba-profile (code=exited, status=0/SUCCESS) Main PID: 8913 (code=exited, status=255) Oct 19 22:09:57 pws1 systemd[1]: Starting Samba SMB Daemon... Oct 19 22:09:58 pws1 smbd[8913]: [2018/10/19 22:09:58.212377, 0] ../source3/auth/auth_util.c:1382(make_new_session_info_> Oct 19 22:09:58 pws1 smbd[8913]: create_local_token failed: NT_STATUS_ACCESS_DENIED Oct 19 22:09:58 pws1 smbd[8913]: [2018/10/19 22:09:58.242258, 0] ../source3/smbd/server.c:2000(main) Oct 19 22:09:58 pws1 smbd[8913]: ERROR: failed to setup guest info. Oct 19 22:09:58 pws1 systemd[1]: smb.service: Main process exited, code=exited, status=255/n/a Oct 19 22:09:58 pws1 systemd[1]: smb.service: Failed with result 'exit-code'. Oct 19 22:09:58 pws1 systemd[1]: Failed to start Samba SMB Daemon. Same smb.conf used under Leap 15 was working correctly. One of those rare moments that TW is not so stable anymore? Regards, Frans. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Wired Internet Gone
by Mark Misulich 19 Oct '18

19 Oct '18

Hi, last Thursday evening my DSL signal to my house went dead, and didn't come back. Today the repair man came and replaced a connection module in the box on the wall outside of my house. Voila, DSL signal tested good up to the modem next to the computer inside the house. But the DSL modem didn't show that there was a signal. So the repairman replaced the DSL modem with a new modem with integrated wifi, and I was able to log on to the internet in Win7, WinXP, but not openSuse. He left, and I thought that I just had to configure something in yast to make it work. But it's not working, and the settings seem to be correct for the network. I can't connect to the internet on any computer using openSuse with a wired connection. I can connect using wifi with my laptop, but even it won't connect with a wired connection to the internet. I'm using opensuse leap 15.0 with KDE Frameworks 5.45.0. I will need some help to resolve this, so thanks in advance. Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 11