August 2011 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Installing Airtime 1.9.0 on openSUSE
by Andi Sugandi 09 Aug '11

09 Aug '11

Hi Listmates, Anyone has tried installing Airtime 1.9.0 (RC2) on openSUSE? http://wiki.sourcefabric.org/display/CC/Manual+Install I can not find some dependency packages on OBS needed to install Airtime on openSUSE, at least there are (mostly ocaml modules): libsoundtouch-ocaml libvorbis-ocaml-dev libtaglib-ocaml libao-ocaml libmad-ocaml libcamomile-ocaml-dev Btw, I can not also find the tar ball version (source code) of those packages, where should i go to get them so i can compile them manually? #Paul: Has any one on Sourcefabric tried to install Airtime on openSUSE / Fedora? and whout do you suggest about it? Thanks in advance. Best regards, -- Andi Sugandi. openSUSE-id Team, openSUSE Community Member. https://connect.opensuse.org/pg/profile/andisugandi -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] Perl-Bootloader
by Constant Brouerius van Nidek 08 Aug '11

08 Aug '11

After the exchange of my hd0 hard-disk I had to remove manually the existence of the old drive. I remember that I used midnight commander to find all places that mentioned the old drive. The new drive is working properly but at boot or in case I install the latest kernel I get the message: Perl-Bootloader: 2011-08-05 17:38:09 ERROR: GRUB::GrubDev2UnixDev: did not find a match for hd0 in the device map Is there an automatic method to get rid of this message? I reckoned that the system would do a self-repair after partitioning and such. -- Linux User 183145 using LXDE and KDE4 on a Pentium IV , powered by openSUSE 11.4 (i586) Kernel: 3.0.0-7-desktop LXDE WM & KDE Development Platform: 4.7.00 (4.7.0) 17:28pm up 3:56, 4 users, load average: 4.24, 4.58, 3.84 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 8

[opensuse] Does YAST's failure to mount Vista/W7 shares 'ro' by default cause problems with BCD on dual-boot boxes?
by David C. Rankin 08 Aug '11

08 Aug '11

All, I have a dual-boot box with 11.4/vista where vista seems to lose the ability to boot regularly (I know its' vista... but read on). Part of the issue seems to center around the way vista and w7 BCD bootmgr use disk signatures as validation of the boot environment during startup. I suspect any change to disk content between windows boots results in boot failure. The vista fail to boot happens regularly requiring the familiar dvd boot and repair. Looking at the fstab defaults for the normal opensuse /windows/C mount point, I was surprised to find that the partition is NOT mounted ro by default. The default fstab entry is: /dev/disk/by-id/ata-WDC_WD6400BEVT-00A0RT0_WD-WX40A9996688-part2 /windows/C ntfs-3g users,gid=users,fmask=133,dmask=022,locale=en_US.UTF-8 0 0 I don't know. Maybe the ntfs-3g mount type includes a default 'ro' option, but I've changed the mount to explicitly include ro: /dev/disk/by-id/ata-WDC_WD6400BEVT-00A0RT0_WD-WX40A9996688-part2 /windows/C ntfs-3g users,gid=users,fmask=133,dmask=022,locale=en_US.UTF-8,ro 0 0 Could failing to explicitly mount the ntfs-3g share ro cause changes that impact the disk signature of the vista/w7 BCD bootmgr that render windows unable to boot? I don't know. That's why I'm putting this out to the folks that know more about the mount defaults to think about. If it is possible, then the simple inclusion of an explicit 'ro' option mounting windows shares may be warranted. I don't know if it will fix it, or make a difference, but something is causing win boot problems on dual-boot boxes with the windows BCD and bootmgr. What say the experts? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] Widget for watching tv/video
by Bogdan Cristea 07 Aug '11

07 Aug '11

Is there a widget allowing to watch tv/video ? Currently I am using vlc to watch tv with my DVB tunner. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Panel color
by Stan Goodman 07 Aug '11

07 Aug '11

When I installed v11.4/KDE on this system some weeks ago, its background was a tannish grey with a kind of grey horizontal barberpole effect, as I remember, with black lettering. I do not remember setting a specific color, and I am unable to find a setting in Configure Desktop/Personal Settings (formerly System Settings). Some days afterward, I noticed that the background has become a dark grey (still with black characters), so that reading te lettering was very difficult or impossible; only the presence of icons makes this panel useful. I have no idea what caused the change. Nothing else on the desktop has a black background. A few days later, the colors returned to their original state, but another few days later became black again. You can see what this looks like at <ftp.hashkedim.com/pub/panel1.png>. I have a second panel at the top of the screen which is, if anything, in worse condition: most of the vertical height of the "barbarpole is overlaid with a black strip, so that panel has become totally useless. What is doing this? -- Stan Goodman Qiryat Tiv'on Israel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 8

[opensuse] lost window frames in Xfce
by Carlos Frederico Lange 07 Aug '11

07 Aug '11

For some reason I lost the window frames in Xfce and now all windows appear on a single workspace. Mouse works, but not the keyboard. It reminds me of the old problem that used to happen in Compiz. Any ideas how I can reset it? -- Carlos F Lange -- Recursive: Adj. See Recursive. -- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] Post to Mailing List via menu launches browser
by ianseeks 07 Aug '11

07 Aug '11

HI When trying to post an email to this mailing list via kmail2 "Message/Mailing List/Post new message" kmail2 launches my browser to compose/send the email instead of kmail2? Does anyone know if this is a config option? Right clicking on the mailing list folder doesn't give you a "post to mailing list" option like kmail1. Anyone else have these issues? regards Ian -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] [SOLVED] Flash not working in Firefox
by Carlos Frederico Lange 07 Aug '11

07 Aug '11

For the record: The Flash plugin was not working in Firefox in both my desktop (64b) and laptop (32b), but it was working fine in Chromium. I finally had time to troubleshoot it and I saw in about:plugins that I had 2 Shockwave Flash plugins installed. One was 9.something and the other the current 10.3 r181. The culprit was the package 'swfdec-mozilla' which I had installed in addition to 'flash-player' and 'flash-player-kde4'. After deleting 'swfdec-mozilla' and 'swfdec', Flash now works fine in Firefox. -- Carlos F Lange -- Recursive: Adj. See Recursive. -- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] KDE 4.7 , opensuse 11.4 64bit.
by Anton Aylward 07 Aug '11

07 Aug '11

Thomas Lübking said the following on 08/07/2011 09:35 AM: > Am Sun, 07 Aug 2011 07:22:29 -0400 > schrieb Anton Aylward<Anton.Aylward(a)rogers.com>: > >> Phenomena like: The size and position of the widgets on screen is >> the same every time I login even if I move, resize delete or add. >> >> >> Phenomena like: the set of programs in the kickoff menu's "recently >> used" set is the same on every new login regardless of what I ran in >> a previous session. > > Is *only* "plasma-stuff" affected? I'm not sure what you mean by "plasma-stuff" How do I tell the stuff I've put in my panel and on the desktop after right-click on scree, clicking "unlock widgets" then "add widgets"? Things like analog clock, weather, cpu load, temperature .... or perhaps the same to the bottom panel > Check the timestamps on ~/.kde4/share/config/(plasma*|kickoff*) (that > might be zsh only syntax) - are they being written? Sorry. I thought I made that clear with the example of kickoffrc. The timestamp alters each day but the contents don't. I suppose I could add kernel taps to record what gets written to disk, but that might just overflow my disk. > Copy those files. Alter some widgets on your desktop. "kquitapp > plasma-desktop". Then diff the copies agains the actual config files. > Any updates? I'll do that, but could you explain how that is different from login alter some widgets (e.g. add to desktop, change the size/position of "folder view" and the folder it refers to, its sort order log out log in again And find that those changes are no longer there. Similarly with kickoff not recording the recently used. Yes, I took a copy of kickoffrc in "init 3"mode before a session. No matter how many programs I started during a session and could see on the 'recently used' _during_ the session, when I logged out the "new" kickoffrc was the same as before. I'm sorry, I thought I made that clear in a previous post. Is the kickoff menu a widget or a plasmoid? When I use the "add widget" I can select "categories" and "running" and see "application launcher" there. Along with "folder view" and the other things I have on my desktop like the clock ..... That makes these 'widgets' and 'widgets are not plasmoids? Now if I DO wipe ~/.kde4, start kde4 and set up a new set of widget - or should I be calling them plasmoids? - then this new set are there. And if I alter them in a session .... they get recorded from that "empty" session and are the new 'baseline' I log out and they get recorded because there was no session before. When in log in, that first session's settings come back. I make changes, but .. It doesn't stick once I have logged out and in again. Whenever I log in again I get that first sessions settings AGAIN. The Desktop Naming bug seemed limited. This seems more comprehensive, affecting many widgets. Or plasmoids. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] accented characters in libre office
by George OLson 07 Aug '11

07 Aug '11

Howdy all, I am working with a minority language group (a spoken language, not a programming language :) ) which does not have language support of any kind in any platform. However, for the script we are using, all I need to be able to do is put 1 of 3 characters over the vowels - a right accent (don't know how to insert, as here it only goes straight down like this ' but I want it to go to the right), a grave accent `, and a carat ^. Here are some examples I have cut and pasted from old data I typed in using microsoft office: binoó - means piled tùpa - means to share equally lugtâ - means dirt or land When I used windows, I installed the english international keyboard in the operating system, as this has those 3 characters. However, since I am trying to migrate over to suse linux, how can I do something comparable? All I need to do is to be able to use the keyboard to enter the characters without having to take a mouse and clicking on an insert special character function when I type out data in a word processor like libre office, or when I enter text in a cell in a spreadsheet or database. Thanks, G -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

7 12