September 2008 - openSUSE Users - openSUSE Mailing Lists

[opensuse] switch off beep in yast
by Anton Moiseev 03 Sep '08

03 Sep '08

Hello, I have opensuse 11 on the notebook. I want to switch off beep sound on error message in yast. For example, I run software manager, install some software and receive some error during installation (something wrong with the network for example and package can't be downloaded, does not make sence) - I receive a dialog telling me about this error and when I press OK it makes "beep". Very annoying, I see the error myself, I do not see much use in reminding me about it with this additional beep each time, especially if I'm not alone in the room and when such error messages appear rather often. I have filled a bug report here (it is also related to the beep in console and during ctrl+alt+backspace): https://bugzilla.novell.com/show_bug.cgi?id=422649 and I have also found something similar here: https://bugzilla.novell.com/show_bug.cgi?id=409499 But I would also be happy to switch off this beep everywhere in my current system as soon as possible thank's -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Dual monitors on boot
by Chris Arnold 03 Sep '08

03 Sep '08

Using 11.0 x86 64 with kde 4.1 and dual hp w2007h monitors. I want to be able to have both monitors show something on boot. As it is now, only the 1 monitor shows the opensuse boot screen. Is there anyway to have both monitors show this screen on boot (or perhaps a different screen on boot)? These monitors are not in "clone" mode they are in "extended" mode. Is there anyway to do this? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] K3B-1.95-svn & MP3
by Philip Burness 03 Sep '08

03 Sep '08

Hi, I'm using Amarok(KDE3) under KDE4 and trying to burn a playlist using K3B for KDE4. It is complaining about missing MP3 codec. I've downloaded and installed codecs for kde from the opensuse-community website but it still will not work. k3b for kde3 works fine. Where can I get the codecs for kde4? Thanks Phil -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

Re: [opensuse] Opensuse vs Suse enterprise support
by Satoru Matsumoto 03 Sep '08

03 Sep '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Fabio You should reply to the mailing list instead of sending direct to me. Fabio Serra wrote: > Satoru Matsumoto wrote: >> Fabio Serra wote: >> >> >>> So, I'm evaluating to buy a Suse Enterprise license. >>> Unfortunately, I don't understand for how many years the support is >>> guaranted. >>> >> >> See: >> http://support.novell.com/lifecycle/lcSearchResults.jsp?sl=suse >> > > Thank you very much for the link, but for me continue to be unclear :-( > If I buy a SLES 10 Basic license > http://www.novell.com/products/server/howtobuy.html > means that I will have patches and update until 31 Jul 2011? > Or I have to buy the Three year full subscription? > Regards If you buy 1 year full subscription, you can get updates and bugfixes with YOU(YaST Online Update) for 1 year, 3 year full subscription for 3 years. You can use SLE with no subscription. But in that case, you can't get any support, have to download packages for updates & bugfixes and install them manually by yourself. For further questions, you should ask Novell in your region and may get the detailed answers. ;-) - -- _/_/_/ To be Happy! _/_/_/ _/_/ Satoru Matsumoto _/_/ _/ helios_reds(a)gmx.net _/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iEYEARECAAYFAki+sG8ACgkQXnHIfHE6+z0V2QCeLJUyIE1pN5yxmTydeeAvJPMG iUMAn1y4hesJ+ZzxC5JYp8McImnTLMcd =GjOZ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] kinternet fails to connect to smpppd
by Bernd Frieboese 03 Sep '08

03 Sep '08

Hi there, I have installed Suse 11 with Kde 3.5 and I can't run my analog modem. The message I get from Kinternet states that smpppd may not be running or I may not be in the dialout group. I have checked and found that smpppd is installed (but is it running?) and that I am in the dialout group. Greetings, Bernd - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Diese Email wurde mit sauberem Strom von Greenpeace energy eG verschickt. Machen Sie mit bei unserer Kampagne "Atomstromfreies Internet" und besuchen Sie unser Portal http://www.atomstromfreies-internet.de - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] Opensuse vs Suse enterprise support
by Fabio Serra 03 Sep '08

03 Sep '08

I have to setup a new server with OpenSuse 10.3. The problem is that the support for the 10.3 end next year. http://en.opensuse.org/SUSE_Linux_Lifetime So, I'm evaluating to buy a Suse Enterprise license. Unfortunately, I don't understand for how many years the support is guaranted. What I'm looking for is the least expensive license for receiving security and maintenance updates for the next 5 years. Any advice? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

Re: [opensuse] kinternet fails to connect to smpppd
by Bogdan Cristea 03 Sep '08

03 Sep '08

On Wednesday 03 September 2008 16:07:37 you wrote: > how do i check if it is not only installed (this is > confirmed by the packet manager) but actually running? I am pretty sure that there is a script similar to '/sbin/rcnetwork status' that could give you the status of smpppd daemon. I don't remember now its name. Another solution, not the best one, is to issue again smpppd, which should give a warning if the daemon is running already. -- Bogdan Cristea software engineer Sytron Technologies Overseas www.sytron.ro -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Media Woo's
by Chuck Payne 03 Sep '08

03 Sep '08

Guys, I just got xine working after going thru all the emails for the past couple of months. Now before I got it and VLC working. MPlayer was working. The problem I had with Xine and VLC, was audio play back and no video. Like I said, I got it fixed. But now, I am facing a problem where MPlayer plays Video but no audio. What can I do to fix it where all three work, Xine, VLC, and MPlayer? -- -- Command, n.: Statement presented by a human and accepted by a computer in such a manner as to make the human feel as if he is in control. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] test
by Erik Jakobsen 03 Sep '08

03 Sep '08

test -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 3

[opensuse] Cannot access two internal nets with SuSeFirewall2
by wanakom＠gmail.com 03 Sep '08

03 Sep '08

Hi all, My server with Opensuse 11.0 has 3 network adapters, eth3 as external interface (public IP), eth0 (172.26.0.1) and eth2 (192.168.1.1) as internal. I am trying to link the two internal nets (172.26.x.x and 192.168.1.x) so users from both networks can use the printers in both nets. My SuSeFirewall2 config is as follow: - FW_DEV_EXT="any eth3" - FW_DEV_INT="eth0 eth2" - FW_ROUTE="yes" - FW_MASQUERADE="yes" - FW_MASQ_DEV="zone:ext zone:int" - FW_MASQ_NETS="172.26.0.0/16,192.168.1.0/24 192.168.1.0/24,172.26.0.0/16 192.168.1.0/24 172.26.0.0/16" - FW_PROTECT_FROM_INT="no" From network 172.26.x.x I can ping up to eth2 but no futher, and the same with network 192.168.2.x My Google searches have not shown any result. What do I miss in my configuration ? Thanks, -- Louis -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 7