December 2006 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] Asterisk & fax
by Kaare Rasmussen 05 Jan '07

05 Jan '07

> > is that worth a Bugzilla entry? > > ... looks more like a support request to me. It might be. But I've had an asterisk expert looking over the configuration and his conclusion was to get another machine (read: not OpenSUSE). The problem is that rx_fax doesn't send a fax tone. It is called from asterisk as can be seen in the logs. -- Med venlig hilsen Kaare Rasmussen, Jasonic Jasonic Telefon: +45 3816 2582 Nordre Fasanvej 12 2000 Frederiksberg Email: kaare(a)jasonic.dk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

Re: [opensuse] 2 Problems with Cups suse 10.2 [FIXED]
by eddieleprince 04 Jan '07

04 Jan '07

On Sunday 24 December 2006 19:05, James Rome wrote: > I am having the same problem, and think I have updated everything. It is > still doing this. Any ideas? It seems like I spoke too soon. Today, I restarted my machine and the problem was back. Currently running with "cupsd : ALL" in hosts.allow in order to print even from the host machine. Problem: With hosts.deny and hosts.allow activated cups refuses to print. Help welcomed!!! Thanks Eddie -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Future hardware and support.
by Fred A. Miller 04 Jan '07

04 Jan '07

I debated about posting this here, but decided to do so since there's been a lot of interest in what AMD will do with ATI in regards to Linux. Well, after reading the below referenced article, the question as to AMD's intentions is MUCH, MUCH broader, raises my blood pressure considerably, and leaves me wondering will happen after Jan. and Vista is released. The article is long, but worth the read. Fred http://www.cs.auckland.ac.nz/~pgut001/pubs/vista_cost.txt -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 5

[opensuse] Cant start X in Xen
by Karl Agee 04 Jan '07

04 Jan '07

Having problems getting X working in the xen kernel. I have all the xen stuff installed, and when I boot with that kernel "xm list" shows the xen server is running. But when I try to startx, either in runlevels 3 or 5, it comes back with "Failed to load nvidia module". Basically, its there: /lib/modules/2.6.18.2-34-xen/kernel/drivers/char/agp/nvidia-agp.ko /lib/modules/2.6.18.2-34-xen/kernel/drivers/video/nvidia /lib/modules/2.6.18.2-34-xen/kernel/drivers/video/nvidia/nvidiafb.ko and sax2 wont work with it either. It tells me "screens present but not configured properly". btw, this is opensuse 10.2 with the nvidia driver 9631. I've even installed the module manually (insmod) using the full path and even though I get no error I still cant work with X. So whats the magic to getting it working? --Karl __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] kernel source bug in 10.2?
by Istvan Gabor 03 Jan '07

03 Jan '07

Hello: I wanted to build some simple program and got this error: /lib/modules/2.6.18.2-34-default/source/include/linux/vermagic.h:1:30: error: linux/utsrelease.h: No such file or directory I've checked vermagic.h that starts with: #include <linux/utsrelease.h> #include <linux/module.h> It seems the above includes are wrong since the directory does not contain the files. Cheers, IG __________________________________________________________________________ Beír, talál, OKÉ! OK.hu az [origo]-tól: tucatnyi magyar kereső egyben, hogy még többet láss! http://www.ok.hu -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 7

[opensuse] openSUSE 10.2 - can't talk to remote cupsd
by Jay C Vollmer 03 Jan '07

03 Jan '07

Hi everybody. Yesterday evening I upgraded the box I use as a print-server from SuSEPro 10.1 to openSUSE 10.2 and have found that I can no longer print to that system from other devices on my network. Cupsd on the printserver is set to run in runlevels 2, 3 and 5 and is running. a printer is hanging off the parallel port, has been configured and functions properly when jobs are submitted from the server itself. Likewise I can reach the CUPS management page, but only from the server itself (http://localhost:631/,) but I can reach neither cupsd or the CUPS administration page from other hosts on the network. The behavior is the same whether the firewall is on or off. This all worked perfectly under 10.1 and I can't see what's wrong with the setup. Is there someone who might have an idea of what is wrong - or what I might check? aTdHvAaNnKcSe -- JAY VOLLMER JVOLLMER(a)VISI.COM TEXT REFS DOUBLEPLUSUNGOOD SELFTHINK VERGING CRIMETHINK - IGNORE FULLWISE -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 3

[opensuse] passwords
by Doug McGarrett 03 Jan '07

03 Jan '07

To all the folks who write code for Linux: I live in a house by myself. Nobody else ever uses my computer. I really hate it when some program tells me I need an 8-character password. I would be just as happy to bypass the password stuff altogether, but I have a simple password that I want to use on everything. It has 5 characters, and I can remember it. Please keep people like me in mind. Thank you. --doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 14

[opensuse] Changing users temp folder
by Jeffery Fernandez 03 Jan '07

03 Jan '07

Hi, I was wondering if its possible to change the users temp folder location from /tmp to ~/tmp ? When I was using mandriva I was used to having my tmp folder within my home directory. This way when I download a file which happens to be a pdf and gets opened by an other application like kpdf, the file gets stored in my ~/tmp folder than the systems tmp folder. This is advantages for the user to just go to their home/tmp folder to save any files they download to an other location rather than navigating back to the root of the file system to fetch the document from /tmp I don't know what dis-advantages it would have by being in the users home directory. On the other hand having it store the temp files under /tmp is a privacy issue I would think. Jeffery -- Powered by openSUSE 10.2 (i586) Kernel: 2.6.18.2-34-default KDE: 3.5.5 "release 45" 12:51pm up 2 days 19:36, 3 users, load average: 0.50, 0.37, 0.27

9 28

Re: [opensuse] unable to access website after 10.2 install
by Dominique Leuenberger 03 Jan '07

03 Jan '07

Hi >>> Tom Patton <thpnalb(a)micro-net.com> 12/19/06 8:23 PM >>> On Tue, 2006-12-19 at 09:43 -0800, Randall R Schulz wrote: >> >> I don't know what could be causing this and why it's (so far) >manifested >> only when trying to access this particular site / address, but clearly >> the checksum generation is the problem. >I'm by far a guru here, and still waiting on my boxed 10.2, but I wonder >if any of you have tried dial-up (modem0) vs your eth0 interface...? > >All I can say at this point is it workes here, and is a very interesting >problem... What I can say so far: in the company, where I have a proxy between my Suse box and this specific server, it works. So it seems to be a problem caused by two 'incompatible' tcp stacks. Very nice thing to find in the net. I'll stay a bit on it. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

15 39

[opensuse] moodbar and MP3s
by David Geiger 03 Jan '07

03 Jan '07

Hi, I'm just trying to set up the moodbar for amaroK. Unfortunately, it doesn't decode mp3s for me. As mentioned on http://amarok.kde.org/wiki/Moodbar, I have installed the following packages: gstreamer010 gstreamer010-plugins-base gstreamer010-plugins-good gstreamer010-plugins-ugly gstreamer10-plugins-moodbar Works fine for wav-files but when I try it on an mp3 I get a bus error: # moodbar -o test.mood test.mp3 Analyzing file test.mp3 Bus error: Internal data flow error. Anybody familiar with this? David -- David Geiger lists(a)david-geiger.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2